Room temperature nanostructured graphene transistor with high on/off ratio

Graphene Monolayer Nanomesh Structures and Their Applications in Electromagnetic Energy Harvesting for Solving the Matching Conundrum of Rectennas

In this paper, we investigate various graphene monolayer nanomesh structures (diodes) formed only by nanoholes, with a diameter of just 20 nm and etched from the graphene layer in different shapes (such as rhombus, bow tie, rectangle, trapezoid, and triangle), and their electrical properties targeting electromagnetic energy harvesting applications. In this respect, the main parameters characterizing any nonlinear device for energy harvesting are extracted from tens of measurements performed on a single chip containing the fabricated diodes. The best nano-perforated graphene structure is the triangle nanomesh structure, which exhibits remarkable performance in terms of its characteristic parameters, e.g., a 420 Ω differential resistance for optimal impedance matching to an antenna, a high responsivity greater than 103 V/W, and a low noise equivalent power of 847 pW/√Hz at 0 V.

Graphene Strain-Effect Transistor with Colossal ON/OFF Current Ratio Enabled by Reversible Nanocrack Formation in Metal Electrodes on Piezoelectric Substrates

Extraordinarily high carrier mobility in graphene has led to many remarkable discoveries in physics and at the same time invoked great interest in graphene-based electronic devices and sensors. However, the poor ON/OFF current ratio observed in graphene field-effect transistors has stymied its use in many applications. Here, we introduce a graphene strain-effect transistor (GSET) with a colossal ON/OFF current ratio in excess of 10⁷ by exploiting strain-induced reversible nanocrack formation in the source/drain metal contacts with the help of a piezoelectric gate stack. GSETs also exhibit steep switching with a subthreshold swing (SS) < 1 mV/decade averaged over ∼6 orders of magnitude change in the source-to-drain current for both electron and hole branch amidst a finite hysteresis window. We also demonstrate high device yield and strain endurance for GSETs. We believe that GSETs can significantly expand the application space for graphene-based technologies beyond what is currently envisioned.

Harvesting microwave energy using pyroelectricity of nanostructured graphene/zirconium-doped hafnium oxide ferroelectric heterostructures

In this work, we present the design, atomistic/circuit/electromagnetic simulations, and the experimental results for graphene monolayer/zirconium-doped hafnium oxide (HfZrO) ultra-thin ferroelectric-based field effect transistors fabricated at the wafer scale, regarding the pyroelectricity generation directly from microwave signals, at room temperature and below it, namely at 218 K and at 100 K. The transistors work like energy harvesters, i.e. they collect low-power microwave energy and transform it into DC voltages with a maximum amplitude between 20 and 30 mV. The same devices function as microwave detectors in the band 1-10.4 GHz and at very low input power levels not exceeding 80μW when they are biased by using a drain voltage, with average responsivity values in the range 200-400 mV mW^-1.

Development of metal-free layered semiconductors for 2D organic field-effect transistors

To this day, the active components of integrated circuits consist mostly of (semi-)metals. Concerns for raw material supply and pricing aside, the overreliance on (semi-)metals in electronics limits our abilities (i) to tune the properties and composition of the active components, (ii) to freely process their physical dimensions, and (iii) to expand their deployment to applications that require optical transparency, mechanical flexibility, and permeability. 2D organic semiconductors match these criteria more closely. In this review, we discuss a number of 2D organic materials that can facilitate charge transport across and in-between their π-conjugated layers as well as the challenges that arise from modulation and processing of organic polymer semiconductors in electronic devices such as organic field-effect transistors.

Memtransistors Based on Nanopatterned Graphene Ferroelectric Field-Effect Transistors

The ultimate memristor, which acts as resistive memory and an artificial neural synapse, is made from a single atomic layer. In this manuscript, we present experimental evidence of the memristive properties of a nanopatterned ferroelectric graphene field-effect transistor (FET). The graphene FET has, as a channel, a graphene monolayer transferred onto an HfO₂-based ferroelectric material, the channel being nanopatterned with an array of holes with a diameter of 20 nm.

Fluorite-structure antiferroelectrics

Ferroelectricity in fluorite-structure oxides like hafnia and zirconia have attracted increasing interest since 2011. Two spontaneous polarizations of the fluorite-structure ferroelectrics are considered highly promising for nonvolatile memory applications, with their superior scalability and Si compatibility compared to the conventional perovskite-structure ferroelectrics. Besides, antiferroelectricity originating from a field-induced phase transition between the paraelectric and ferroelectric phases in fluorite-structure oxides is another highly interesting matter. It was suggested that the field-induced phase transition could be utilized for energy conversions between thermal and electrical energy, as well as for energy storage. The important energy-related applications of antiferroelectric fluorite-structure oxides, however, have not been systematically reviewed to date. Thus, in this work, the fluorite-structure antiferroelectrics are reviewed from their fundamentals to their applications based on pyroelectricity as well as antiferroelectricity. Another important application field of the fluorite-structure antiferroelectrics is the semiconductor memory devices. The fluorite-structure antiferroelectrics can be utilized for antiferroelectric random-access-memories, negative capacitance field-effect-transistors, and flash memories. Moreover, the recently reported morphotropic phase boundary (MPB) between the ferroelectric and antiferroelectric phases in this material system marks another significant progress in this material system, and thus, the fundamentals and applications of the MPB phase are also reviewed.

Electromagnetic energy harvesting based on HfZrO tunneling junctions

HfZrO ferroelectrics with a thickness of 6 nm were grown directly on Si using atomic layer deposition, top and bottom metallic electrodes being subsequently deposited by electron-beam metallization techniques. Depending on the polarity of the ±10 V poling voltages, the current-voltage dependence of these tunneling diodes shows a rectifying behavior for different polarizations, the ON-OFF ratio being about 10⁴. Because the currents are at mA level, the HfZrO tunneling diodes coupled to an antenna array can harvest electromagnetic energy at 26 GHz (a bandwidth designated for internet of things), with a responsivity of 63 V W^-1 and a NEP of 4 nW/Hz^0.5.