MnO2/g-C3N4 nanocomposite with highly enhanced supercapacitor performance

Carbon Nitride Coupled Co3O4: A Pyrolysis-Based Approach for High-Performance Hybrid Energy Storage

Graphitic carbon nitride (CN) is a cost-effective and easily synthesized supercapacitor electrode material. However, its limited specific capacity has hindered its practical use. To address this, we developed a binary nanostructure by growing nanosized Co3O4 particles on CN. The CN-Co-2 composite, synthesized via thermal decomposition, exhibited a remarkable specific capacity of 280.64 C/g at 2 A/g. Even under prolonged cycling at 10.5 A/g, the retention rate exceeded 95%, demonstrating exceptional stability. In an asymmetric capacitor device, the CN-Co composite delivered 20.84 Wh/kg at 1000 W/kg, with a retention rate of 99.97% over 20,000 cycles, showcasing outstanding cycling stability. Controlled cobalt source adjustments yielded high-capacity electrode materials with battery-like behavior. This optimization strategy enhances energy density by retaining battery-like properties. In summary, the CN-Co composite is a promising, low-cost, easily synthesized electrode material with a high specific capacity and remarkable cycling stability, making it an attractive choice for energy storage applications.

Controllable Anchoring of Graphitic Carbon Nitride on MnO2 Nanoarchitectures for Oxygen Evolution Electrocatalysis

The design and fabrication of eco-friendly and cost-effective (photo)electrocatalysts for the oxygen evolution reaction (OER) is a key research goal for a proper management of water splitting to address the global energy crisis. In this work, we focus on the preparation of supported MnO2/graphitic carbon nitride (g-CN) OER (photo)electrocatalysts by means of a novel preparation strategy. The proposed route consists of the plasma enhanced-chemical vapor deposition (PE-CVD) of MnO2 nanoarchitectures on porous Ni scaffolds, the anchoring of controllable g-CN amounts by an amenable electrophoretic deposition (EPD) process, and the ultimate thermal treatment in air. The inherent method versatility and flexibility afforded defective MnO2/g-CN nanoarchitectures, featuring a g-CN content and nano-organization tunable as a function of EPD duration and the used carbon nitride precursor. Such a modulation had a direct influence on OER functional performances, which, for the best composite system, corresponded to an overpotential of 430 mV at 10 mA/cm2, a Tafel slope of ≈70 mV/dec, and a turnover frequency of 6.52 × 10-3 s-1, accompanied by a very good time stability. The present outcomes, comparing favorably with previous results on analogous systems, were rationalized on the basis of the formation of type-II MnO2/g-CN heterojunctions, and yield valuable insights into this class of green (photo)electrocatalysts for end uses in solar-to-fuel conversion and water treatment.

Electrochemical analysis of asymmetric supercapacitors based on BiCoO3@g-C3N4 nanocomposites

Supercapacitors are gaining popularity these days because of their good cycle stability, superior specific capacitance, high power density, and energy density. Herein, we report the synthesis of bismuth cobalt oxide (BiCoO3) combined with graphitic carbon nitride (g-C3N4) by the hydrothermal method. The BiCoO3@g-C3N4 nanocomposite was well characterized using XRD, FE-SEM, FT-IR, and DRS-UV techniques. The supercapacitor properties of the BiCoO3@g-C3N4 nanocomposite were then studied using cyclic voltammetry, galvanic charging-discharging, and impedance spectroscopy techniques. Due to the synergistic effect, BiCoO3@g-C3N4 showed a high specific capacitance value of 341 F g-1 at a current density of 1 A g-1 and excellent retention of specific capacitance (98.82%) after 1000 cycles and a high power density of 1125 W kg-1. Using the impedance spectroscopy technique, the charge transfer resistance of BiCoO3, g-C3N4, and BiCoO3@g-C3N4 was measured. BiCoO3@g-C3N4 showed a low charge transfer resistance compared with BiCoO3 and g-C3N4. The asymmetric supercapacitor (ASC) device was prepared using activated carbon (negative side) and BiCoO3@g-C3N4 (positive side) electrodes. It showed a specific capacitance of 129 F g-1 at 1 A g-1, power density 2800 W kg-1 and energy density 35 W h kg-1. Finally, we conclude that, due to the high specific capacitance, good cycle retention, fast redox activity, and low charge transfer resistance BiCoO3@g-C3N4 is a good electrode material for energy storage applications.

A novel nanocomposite containing zinc ferrite nanoparticles embedded in carboxymethylcellulose hydrogel plus carbon nitride nanosheets with multifunctional bioactivity

A novel and biologically active nanobiocomposite is synthesized based on carbon nitride nanosheet (g-C3N4) based carboxymethylcellulose hydrogels with embedded zinc ferrite nanoparticles. Physical-chemical aspects, morphological properties, and their multifunctional biological properties have been considered in the process of evaluation of the synthesized structure. The hydrogels' compressive strength and compressive modulus are 1.98 ± 0.03 MPa and 3.46 ± 0.05 MPa, respectively. Regarding the biological response, it is shown that the nanobiocomposite is non-toxic and biocompatible, and hemocompatible (with Hu02 cells). In addition, the developed material offers a suitable antibacterial activity for both Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli).

Enhancing Electrochemical Performance with g-C3N4/CeO2 Binary Electrode Material

An innovative form of 2D/0D g-C3N4/CeO2 nanostructure was synthesized using a simple precursor decomposition process. The 2D g-C3N4 directs the growth of 0D CeO2 quantum dots, while also promoting good dispersion of CeO2QDs. This 2D/0D nanostructure shows a capacitance of 202.5 F/g and notable rate capability and stability, outperforming the g-C3N4 electrode, reflecting the state-of-the-art g-C3N4 binary electrodes. The binary combination of materials also enables an asymmetric device (g-C3N4/CeO2QDs//AC) to deliver the highest energy density (9.25 Wh/kg) and power density (900 W/kg). The superior rate capacity and stability endorsed the quantum structural merits of CeO2QDs and layered g-C3N4, which offer more accessible sites for ion transport. These results suggest that the g-C3N4/CeO2QDs nanostructure is a promising electrode material for energy storage devices.

Facile Hydrothermal Synthesis of Binder-Free Hexagonal MnO2 Nanoparticles for a High-Performance Supercapacitor’s Electrode Material

Manganese dioxide (MnO2)-based nanostructures are promising electrode materials for supercapacitors (SCs) due to their low cost, eco-friendly nature, and high theoretical capacitance. However, the conductivity of MnO2 is poor, which is a big problem when trying to achieve the desired capacitance value. Herein, hexagonal-phase MnO2 nanoparticles (NPs) are directly grown on a 3D conductive carbon cloth (CC) (denoted as MnO2-NPs@CC) as a binder-free electrode through a simple and scalable hydrothermal strategy. The results show that MnO2-NPs@CC with a large specific surface area and high porosity could be employed as a positive electrode material for high-performance SCs. Owing to these attractive properties, the MnO2-NPs@CC electrode delivers a high specific capacitance of 660 F/g at a current density of 2 A/g in 6 M KOH aqueous electrolytes. Moreover, the MnO2-NPs@CC electrode demonstrates excellent cycling stability with high capacitance retention of 92.8% over 10,000 cycles. Such remarkable findings suggest that MnO2-NPs@CC with enhanced electrochemical performance is a favorable electrode material for next-generation high-performance SCs.

Silver Nanoparticle Decorated on Reduced Graphene Oxide-Wrapped Manganese Oxide Nanorods as Electrode Materials for High-Performance Electrochemical Devices

In this work, silver nanoparticles decorated on reduced graphene oxide (rGO) wrapped manganese oxide nanorods (Ag-rGO@MnO2) were synthesized for an active electrode material. MnO2 nanorods were synthesized via a hydrothermal route, and their coating with GO and subsequent reduction at a higher temperature resulted in rGO@MnO2. A further addition of Ag on rGO@MnO2 was performed by dispersing rGO@MnO2 in AgNO3 solution and its subsequent reduction by NaBH4. X-ray diffraction (XRD) analysis showed peaks corresponding to MnO2 and Ag, and the absence of a peak at 2θ = 26° confirmed a few layered coatings of rGO and the absence of any graphitic impurities. Morphological analysis showed Ag nanoparticles anchored on rGO coated MnO2 nanorods. Apart from this, all other characterization techniques also confirmed the successful fabrication of Ag-rGO@MnO2. The electrochemical performance examined by cyclic voltammetry and the galvanic charge–discharge technique showed that Ag-rGO@MnO2 has a superior capacitive value (675 Fg−1) as compared to the specific capacitance value of rGO@MnO2 (306.25 Fg−1) and MnO2 (293.75 Fg−1). Furthermore, the electrode based on Ag-rGO@MnO2 nanocomposite showed an excellent capacity retention of 95% after 3000 cycles. The above results showed that Ag-rGO@MnO2 nanocomposites can be considered an active electrode material for future applications in electrochemical devices.

Tandem oxidative amidation of benzylic alcohols by copper(II) supported on metformin-graphitic carbon nitride nanosheets as an efficient catalyst

In this research, an efficient heterogeneous catalyst based on graphitic carbon nitride nanosheets (CN) has been reported. The CN was functionalized by 1,3-dibromopropane as a linker (CN-Pr-Br) and subsequently modified with metformin (CN-Pr-Met). Furthermore, the copper(II) was coordinated on modified CN (CN-Pr-Met-Cu(II)) and during this process, 7.94% copper(II) was loaded into the catalyst structure. The synthesized catalyst was evaluated by various techniques including fourier-transform infrared spectroscopy (FT-IR), energy dispersive X-ray spectroscopy (EDS), field emission scanning electron microscopy (FE-SEM), thermogravimetric analysis (TGA), X-ray diffraction (XRD), and inductively coupled plasma atomic emission spectroscopy (ICP-OES). CN-Pr-Met-Cu(II) was used as a catalyst in the synthesis of amides via the oxidation of benzyl alcohols. The conditions of this reaction were optimized in terms of temperature, time, amount of catalyst, type of base, oxidant, and solvent. Moreover, a variety of amides with an efficiency of 75-95% were synthesized. The reaction was carried out in the presence of benzyl alcohols, amine hydrochloride salts, tert-butyl hydroperoxide (TBHP), CaCO3, and CN-Pr-Met-Cu(II) at 80 °C of acetonitrile solvent. The synthesized catalyst can be easily separated from the reaction medium and reused for 7 consecutive runs without a significant reduction in reaction efficiency.

Surface and chemical characteristics of platinum modified activated carbon electrodes and their electrochemical performance

Platinum (Pt) loaded activated carbons (ACs) were synthesized by the thermal decomposition of platinum (II) acetylacetonate (Pt(acac)2) over chemically activated glucose-based biochar. The effect of Pt loading on surface area, pore characteristics, surface chemistry, chemical structure, and surface morphology were determined by various techniques. XPS studies proved the presence of metallic Pt0 on the AC surface. The graphitization degree of Pt loaded ACs were increased with the loaded Pt0 amount. The electrochemical performance of the Pt-loaded ACs (Pt@AC) was determined not only by the conventional three-electrode system but also by packaged supercapacitors in CR2032 casings. The capacitive performance of Pt@AC electrodes was investigated via cyclic voltammetry (CV), galvanostatic charge-discharge curves (GCD), and impedance spectroscopy (EIS). It was found that the Pt loading increased the specific capacitance from 51 F/g to 100 F/g. The ESR drop of the packaged cell decreased with the Pt loading due to the fast flow of charge through the conductive pathways. The results showed that the surface chemistry is more dominant than the surface area for determining the capacitive performance of Pt loaded AC-based packaged supercapacitors.

Two-step synthesis of millimeter-scale flexible tubular supercapacitors

Flexible supercapacitors have been demonstrated to be ideal energy storage devices owing to their lightweight and flexible nature and their high power density. However, conventional film-shaped devices struggle to meet the requirements of application in complicated situations, including medical instruments and wearable electronics. Here we report a hollow-structured flexible tubular supercapacitor prepared from a scalable method with the same diameter as electric wires. This new supercapacitor design allows for a large specific capacitance of 102 F g^-1 at a current density of 1 A g^-1 with excellent air-working stability over 10,000 cycles. It also shows a high energy density of 14.2 Wh kg^-1 with good rate capability even at a current density of 10 A g^-1, which is superior to commercial devices (3-10 Wh kg^-1). Moreover, the device delivers a stable energy storage capacity when encountering different flexible conditions, such as elongated, tangled and bent states, showing wide potentials in flexible and even wearable applications. Especially, it retains stable specific capacitance even after 500 bending cycles with a bending angle of 180°. The two-step fabrication method of these flexible tubular supercapacitors may allow for possible mass production, as they could be easily integrated with other functional components, and used in realistic scenarios that conventional film devices struggle to realize.

Designing of Carbon Nitride Supported ZnCo2O4 Hybrid Electrode for High-Performance Energy Storage Applications

This study reports a unique graphitic-C₃N₄ supported ZnCo₂O₄ composite, synthesized through a facile hydrothermal method to enhance the electrochemical performance of the electrode. The g-C₃N₄@ZnCo₂O₄ hybrid composite based electrode exhibits a significant increase in specific surface area and maximum specific capacity of 157 mAhg⁻¹ at 4 Ag⁻¹. Moreover, g-C₃N₄@ZnCo₂O₄ electrode maintained significant capacity retention of 90% up to 2500 cycles. Utilizing this composite in the development of the symmetric device, g-C₃N₄@ZnCo₂O₄//g-C₃N₄@ZnCo₂O₄ displays a specific capacity of 121 mAhg⁻¹. The device exhibits an energy density of 39 Whkg⁻¹ with an equivalent power density of 1478 Wkg⁻¹. A good cycling stability performance with an energy efficiency of 75% and capacity retention of 71% was observed up to 10,000 cycles. The superior performance of g-C₃N₄@ZnCo₂O₄ is attributed to the support of the g-C₃N₄ which increases the surface area, electroactive sites and provides chemical stability for electrochemical performance. The outstanding performance of this exclusive device symbolizes remarkable progress in the direction of high-performance energy storage applications.

Fabrication of 2D/2D nanosheet heterostructures of ZIF-derived Co3S4 and g-C3N4 for asymmetric supercapacitors with superior cycling stability

Asymmetric supercapacitors with superior cycling stability are achieved by designing 2D/2D nanosheet heterostructures of ZIF-derived Co₃S₄ and g-C₃N₄.

Construction of heterostructure based on hierarchical Bi2MoO6 and g-C3N4 with ease for impressive performance in photoelectrocatalytic water splitting and supercapacitor

This work demonstrates the formation of g-C₃N₄/Bi₂MoO₆ heterostructure for water splitting and supercapacitor; which shows highest PEC efficiency and symmetric device delivered a energy density and power density of 47 W h kg⁻¹ and 4.5 kW kg⁻¹.

Three-Dimensional Carbon Nitride Nanowire Scaffold for Flexible Supercapacitors

Herein, a 3D composite electrode supported by g-C3N4 nanowire framework as scaffold and poly(3,4-ethylenedioxythiophene): poly(4-styrenesulfonate) (PEDOT: PSS) as conducting polymer is reported for flexible solid-state electrochemical capacitors. Compared to pure PEDOT: PSS, the composite electrodes have a greatly increased specific surface and showed good electrochemical performance. A specific capacitance of 202 F g-1 is achieved, and 83.5% of initial capacitance maintained after 5000 cycles. The device based on the 3D g-C3N4/PEDOT: PSS electrode also exhibits good performance in capacitance, flexibility, and cycling stability.

Few-layered mesoporous graphitic carbon nitride: a graphene analogue with high capacitance properties

Exfoliation of multi-layered MGCN into few-layered MGCN results in 50% enhancement in the specific capacitance value.

Pristine carbon nitride as active material for high-performance metal-free supercapacitors: simple, easy and cheap

Understanding the basic properties of pristine carbon nitride electrodes is of great importance for their further applications as supercapacitor materials.

STM-electroluminescence from clustered C3N4 nanodomains synthesized via green chemistry process

A Scanning Tunneling Microscopy/Spectroscopy (STM/STS) and synchrotron X-ray diffraction study on clustered C₃N₄ nanoparticles (nanoflakes) is conducted on green-chemistry synthesized samples obtained from chitosan through high power sonication. Morphological aspects and the electronic characteristics are investigated. The observed bandgap of the nanoflakes reveals the presence of different phases in the material. Combining STM morphology, STS spectra and X-ray diffraction (XRD) results one finds that the most abundant phase is graphitic C₃N₄. A high density of defects is inferred from the XRD measurements. Additionally, STM-electroluminescence (STMEL) is detected in C₃N₄ nanoflakes deposited on a gold substrate. The tunneling current creates photons that are three times more energetic than the tunneling electrons of the STM sample. We ponder about the two most probable models to explain the observed photon emission energy: either a nonlinear optical phenomenon or a localized state emission.