A flat-panel-shaped hybrid piezo/triboelectric nanogenerator for ambient energy harvesting

Fabrication and Characterization of a Flexible Polyurethane-Based Triboelectric Nanogenerator for a Harvesting Energy System

Powering wearable and portable devices, triboelectric nanogenerators (TENGs) are a considerably promising technology. Low-cost production, ease of fabrication, optimal efficiency, and high output performance are always key concerns in developing energy harvesting technologies. Optimum efficiency and high output are always key concerns. This research addresses the ongoing challenge of raising efficient, flexible, and lightweight energy harvesting systems for recent wearable technologies. In this research, a triboelectric nanogenerator is proposed for harvesting the triboelectric effect. Using polyurethane (PU), a bendable TENG that is in the vertical contact separation mode was developed. UV-curable PU forms the basis of TENGs. A sponge, repurposed from landfill waste, acts by means of a spacer to maintain a consistent air gap between the tribo-layers for enhanced triboelectrification. The triboelectric nanogenerators formed a Voc approaching 500 V and a current of ~2 µA and also showed high performance with a power density of 8.53 W/m2. In addition, the triboelectric nanogenerator can light LEDs and charge capacitors, making it a self-powered energy source for portable devices, Wi-Fi, and monitoring systems. The proposed TENG provides a capable solution for sustainable, self-powered wearable electronics and has the potential for further development in energy-efficient and eco-friendly applications.

Advances in Smart Photovoltaic Textiles

Energy harvesting textiles have emerged as a promising solution to sustainably power wearable electronics. Textile-based solar cells (SCs) interconnected with on-body electronics have emerged to meet such needs. These technologies are lightweight, flexible, and easy to transport while leveraging the abundant natural sunlight in an eco-friendly way. In this Review, we comprehensively explore the working mechanisms, diverse types, and advanced fabrication strategies of photovoltaic textiles. Furthermore, we provide a detailed analysis of the recent progress made in various types of photovoltaic textiles, emphasizing their electrochemical performance. The focal point of this review centers on smart photovoltaic textiles for wearable electronic applications. Finally, we offer insights and perspectives on potential solutions to overcome the existing limitations of textile-based photovoltaics to promote their industrial commercialization.

Boosting the output performance of triboelectric nanogenerators via surface engineering and structure designing

Triboelectric nanogenerators (TENGs) have been utilized in a wide range of applications, including smart wearable devices, self-powered sensors, energy harvesting, and high-voltage power sources. The surface morphology and structure of TENGs play a critical role in their output performance. In this review, we analyze the working mechanism of TENGs with the aim to improve their output performance and systematically summarize the morphological engineering and structural design strategies for TENGs. Additionally, we present the emerging applications of TENGs with specific structures and surfaces. Finally, we discuss the potential future development and industrial application of TENGs. By deeply exploring the surface and structural design strategy of high-performance TENGs, it is conducive to further promote the application of TENGs in actual production. We hope that this review provides insights and guidance for the morphological and structural design of TENGs in the future.

From Triboelectric Nanogenerator to Multifunctional Triboelectric Sensors: A Chemical Perspective toward the Interface Optimization and Device Integration

Triboelectric nanogenerators (TENGs) have intrigued scientists for their potential to alleviate the energy shortage crisis and facilitate self-powered sensors. Triboelectric interfaces containing triboelectric functionalized molecular groups and tunable surface charge densities are important for improving the electrical output capability of TENGs and the versatility of future electronics. In this review, following an introduction to the fundamental progress of TENG systems for mechanic energy harvesting, surface modifications that aim to increase the surface charge density and functionality are highlighted, with an emphasis on interfacial chemical modification and triboelectric energetics/dynamics optimization for efficient electrostatic induction and charge transfer. Recent advances in assemblies of multifunctional triboelectric sensing are briefly introduced, and future challenges and chemical perspectives in the field of TENG-based electronics are concisely reviewed. This review presents and advances the understanding of the state-of-the-art chemical strategies toward rational triboelectric interface engineering and system assembly and is expected to guide the rational design of highly efficient and versatile triboelectric sensing.

Recent developments of hybrid piezo-triboelectric nanogenerators for flexible sensors and energy harvesters

Hybrid piezo-triboelectric nanogenerators constitute a new class of self-powered systems that exploit the synergy of piezoelectric and triboelectric mechanisms to improve energy harvesting efficencies and address the energy and power needs of portable and wearable electronic devices. The unique, synergistic electrical coupling mechanisms of piezoelectric and triboelectric effects increase the electric outputs and energy conversion efficiency of hybrid generators to beyond a linear summation of the contributions from individual triboelectric and piezoelectric mechanisms. Due to their large surface-area-to-volume ratios and outstanding mechanical, electronic and thermal properties, nanomaterials are favourable building blocks for constructing hybrid nanogenerators and represent a large family of flexible energy harvesting electronic structures and devices. Herein, we review the recent advances of hybrid piezo-triboelectric nanogenerators, with a particular focus on microstructure design, synergy mechanisms, and future research opportunities with significant potential for physiological monitoring, health care applications, transportation, and energy harvesting. The main strategies for improving electrical output performance are identified and examined, including novel nanostructures for increasing the contact area of the triboelectric pair, and nano-additives for enhancing the surface potential difference between the triboelectric pair and piezoelectric layers. Future applications and commercialization opportunities of these nanogenerators are also reviewed.

A ferroelectric nanocomposite-film-based device for harvesting energy from water droplets using both piezoelectric and triboelectric effects

In this paper, we have demonstrated a novel design of a liquid-solid interface triboelectric nanogenerator based on a ZnO- polyvinylidene fluoride (PVDF) flexible ferroelectric film that employs both piezoelectric and triboelectric properties to produce more electricity from water droplets. The present device gives an output voltage of ∼1.32 V and a short-circuit current of ∼0.32μA from the conventional liquid-solid triboelectric nanogenerator (LSTENG), while an additional open-circuit voltage of ∼2.72 mV and short-circuit current of ∼20 nA is generated from the piezoelectric effect. The mechanism for generating energy in both the piezoelectric and triboelectric components is also discussed. Furthermore, we explored the effect of ions in water on the performance of the LSTENG, and the results were confirmed by Kelvin probe force microscopy measurements. The current work reveals a new LSTENG design and the benefit of employing a ferroelectric polymer as the contacting material rather than other non-piezoelectric materials for the LSTENG.

Design and optimisation of magnetically-tunable hybrid piezoelectric-triboelectric energy harvester

The demand for energy harvesting technologies has been increasing over the years that can be attributed to its significance to low power applications. One of the key problems associated with the available vibration-based harvester is the maximum peak power can only be achieved when the device frequency matches the source frequency to generate low usable power. Therefore, in this study, a magnetically-tunable hybrid piezoelectric-triboelectric energy harvester (MT-HPTEH) was designed and optimised. Four key design factors: mass placement, triboelectric surface area, extension length and magnetic stiffness were investigated and optimised. The voltage generation from piezoelectric and triboelectric mechanisms was determined individually to understand the effect of each design factor on the mechanisms. An output power of 659 µW at 180 kΩ at 44 Hz was obtained from the optimised MT-HPTEH with a theoretical-experimental discrepancy of less than 10%. The added magnetically-tunable feature enabled the harvester to work at the desired frequency range with an open circuit voltage between 7.800 and 20.314 V and a frequency range from 38 to 54 Hz. This MT-HPTEH can power at least six wireless sensor networks and can be used for low power applications such as RFID tags. Future work may include designing of energy-saving and sustainable harvester.

Development of Sn-doped ZnO based ecofriendly piezoelectric nanogenerator for energy harvesting application

In this work, we have a demonstrated zinc oxide (ZnO) polymer-based ecofriendly piezoelectric nanogenerator (PENG) on a paper substrate for an energy harvesting application. The ZnO thin film is developed on the paper substrate, where different doping concentrations of Sn have been investigated systematically to validate the effect of doping towards enhancing the device performance. The piezoelectric potential of the fabricated device is evaluated by applying three different loads (4 N, 8 N, 22 N), where the source of the corresponding mechanical loads is based on the object of a musical drum stick. The results suggest that the pristine ZnO PENG device can generate a maximum output voltage and current of 2.15 V and 17 nA respectively. Moreover, the ZnO PENG device doped with 2.5% Sn achieved an even higher voltage (4.15 V) and current (36 nA) compared to pristine ZnO devices. In addition, the hydrothermal growth technique used to develop Sn-doped ZnO has the benefits of high scalability and low cost. Hence, the Sn-doped PENG device is a suitable candidate for energy harvesting applications operating in both uniform and non-uniform loading conditions.

Piezoelectricity Enhancement of Nanogenerators Based on PDMS and ZnSnO3 Nanowires through Microstructuration

The current trend for smart, self-sustainable, and multifunctional technology demands for the development of energy harvesters based on widely available and environmentally friendly materials. In this context, ZnSnO3 nanostructures show promising potential because of their high polarization, which can be explored in piezoelectric devices. Nevertheless, a pure phase of ZnSnO3 is hard to achieve because of its metastability, and obtaining it in the form of nanowires is even more challenging. Although some groups have already reported the mixing of ZnSnO3 nanostructures with polydimethylsiloxane (PDMS) to produce a nanogenerator, the resultant polymeric film is usually flat and does not take advantage of an enhanced piezoelectric contribution achieved through its microstructuration. Herein, a microstructured composite of nanowires synthesized by a seed-layer free hydrothermal route mixed with PDMS (ZnSnO3@PDMS) is proposed to produce nanogenerators. PFM measurements show a clear enhancement of d33 for single ZnSnO3 versus ZnO nanowires (23 ± 4 pm/V vs 9 ± 2 pm/V). The microstructuration introduced herein results in an enhancement of the piezoelectric effect of the ZnSnO3 nanowires, enabling nanogenerators with an output voltage, current, and instantaneous power density of 120 V, 13 μA, and 230 μW·cm-2, respectively. Even using an active area smaller than 1 cm2, the performance of this nanogenerator enables lighting up multiple LEDs and other small electronic devices, thus proving great potential for wearables and portable electronics.

Hybrid nano-textured nanogenerator and self-powered sensor for on-skin triggered biomechanical motions

Researchers have made a lot of effort for the lightweight and high flexibility of wearable electronic devices, which also requires the associated energy harvesting equipment to have ultra-thin thickness and high stretchability. Therefore, a piezoelectric-triboelectric hybrid self-powered sensor (PTHS) has been proposed which can be used as the second layer of the human body. This elastic PTHS can even work on a person's fingers without disturbing the body's movements. The open circuit voltage and short circuit current of devices with a projected area of 30 mm × 25 mm can reach 1.2 V and 30 nA, respectively. Two piezoelectrically-triboelectrically sensors with machine learning optimized identification strategies were experimentally proven as the potential applications of the PTHS. The PTHS's ultra-thin thickness, high stretchability and superior geometry control features are promising in electronic skin, artificial muscle and soft robotics. The novelty of this work is that a smart mask integrated with PTHS can generate a signal of the hybrid sensor for the biomechanical motion classifier. After suitable training, an overall accuracy of 87.9% using long short-term memory can be achieved.

Power Generation from a Hybrid Generator (TENG-EMG) Run by a Thermomagnetic Engine Harnessing Low Temperature Waste Heat

This work explored the scavenging of low temperature waste heat and conversion of it into electrical energy through the operation of a gadolinium (Gd) based thermomagnetic engine. Gd is one of the unique materials whose magnetic property changes from ferromagnetic to paramagnetic depending on the temperature (“the Curie temperature”), which is around 20 °C. In the present work, two different types of generators were designed and applied to the rotating shaft of a Gd-based thermomagnetic engine developed for low temperature differential (LTD) applications. Of these, one is the so-called triboelectric nanogenerator (TENG), and the other is the electromagnetic generator (EMG). These have been designed to produce electricity from the rotating shaft of the thermomagnetic engine, exploiting both the electromagnetic and triboelectric effects. When operated at a rotational speed of 251 rpm with a temperature difference of 45 °C between the hot and cold water jets, the hybrid (TENG-EMG) generator produced a combined pulsating DC open circuit voltage of 5 V and a short circuit current of 0.7 mA. The hybrid generator effectively produced a maximum output power of 0.75 mW at a loading resistance of 10 kΩ.

All-Printed Human Activity Monitoring and Energy Harvesting Device for Internet of Thing Applications

A self-powered device for human activity monitoring and energy harvesting for Internet of Things (IoT) devices is proposed. The self-powered device utilizes flexible Nano-generators (NGs), flexible diodes and off-the-shelf capacitors. During footsteps the NGs generate an AC voltage then it is converted into DC using rectifiers and the DC power is stored in a capacitor for powering the IoT devices. Polydimethylsiloxane (PDMS) and zinc stannate (ZnSnO₃) composite is utilized for the NG active layer, indium tin oxide (ITO) and aluminum (Al) are used as the bottom and top electrodes, respectively. Four diodes are fabricated on the bottom electrode of the NG and connected in bridge rectifier configuration. A generated voltage of 18 V_peak was achieved with a human footstep. The self-powered smart device also showed excellent robustness and stable energy scavenger from human footsteps. As an application we demonstrate human activity detection and energy harvesting for IoT devices.

Development of a Tree-Shaped Hybrid Nanogenerator Using Flexible Sheets of Photovoltaic and Piezoelectric Films

This paper reports on the feasibility of a tree-shaped hybrid nanogenerator (TSHG) made of flexible sheets of photovoltaic (PV) and piezoelectric (piezo) films for harnessing both wind and solar energy. The proposed system has been designed to produce electricity if there is any light, wind or strong rainfall. It shows how the power developed by each piezo film sheet was integrated in conjunction with its limited power output which is produced by the sporadic movement of the sheets. Regardless of its magnitude, the AC power output of each piezo film sheet was converted with a full wave bridge rectifier and then passed to a capacitor. The TSHG has an excellent performance with an open circuit voltage of 5.071 V, a short-circuit current of 1.282 mA, and a maximum power output of 3.42 mW at a loading resistance of 5 kΩ. Moreover, a wind driven TSHG was capable of charging a 1000 µF capacitor, which was subsequently discharged through LED lighting.

Energy Harvesting Research: The Road from Single Source to Multisource

Energy harvesting technology may be considered an ultimate solution to replace batteries and provide a long-term power supply for wireless sensor networks. Looking back into its research history, individual energy harvesters for the conversion of single energy sources into electricity are developed first, followed by hybrid counterparts designed for use with multiple energy sources. Very recently, the concept of a truly multisource energy harvester built from only a single piece of material as the energy conversion component is proposed. This review, from the aspect of materials and device configurations, explains in detail a wide scope to give an overview of energy harvesting research. It covers single-source devices including solar, thermal, kinetic and other types of energy harvesters, hybrid energy harvesting configurations for both single and multiple energy sources and single material, and multisource energy harvesters. It also includes the energy conversion principles of photovoltaic, electromagnetic, piezoelectric, triboelectric, electrostatic, electrostrictive, thermoelectric, pyroelectric, magnetostrictive, and dielectric devices. This is one of the most comprehensive reviews conducted to date, focusing on the entire energy harvesting research scene and providing a guide to seeking deeper and more specific research references and resources from every corner of the scientific community.