Sensitive optical bio-sensing of p-type WSe2 hybridized with fluorescent dye attached DNA by doping and de-doping effects

Hydration and Charge-Transfer Effects of Alkaline Earth Metal Ions Binding to a Carboxylate Anion, Phosphate Anion, and Guanine Nucleobase

To investigate the ability of alkaline earth metal ions to tune ion-mediated DNA adsorption, hydrated Mg²⁺, Ca²⁺, Sr²⁺, and Ba²⁺ ions bound to a carboxylate anion, phosphate anion, and guanine nucleobase were modeled using density functional theory (DFT) and a combined explicit and continuum solvent model. The large first solvation shell of Ba²⁺ requires a larger solute cavity defined by a solvent-accessible surface, which is used to model all hydrated ions. Alkaline earth metal ions bind indirectly or directly to each binding site. DFT binding energies decrease with increasing ion size, which is likely due to ion size and hydration structure, rather than quantum effects such as charge transfer. However, charge transfer explains weaker ion binding to guanine compared to phosphate or carboxylate. Overall, carboxylate and phosphate anions are expected to compete equally for hydrated Mg²⁺, Ca²⁺, Sr²⁺, and Ba²⁺ ions and larger alkaline earth metal ions may induce weaker ion-mediated adsorption. The ion size and hydration structure of alkaline earth metal ions may effectively tune ion-mediated adsorption processes, such as DNA adsorption to functionalized surfaces.

Room-Temperature Benzene Sensing with Au-Doped ZnO Nanorods/Exfoliated WSe2 Nanosheets and Density Functional Theory Simulations

A gold-doped zinc oxide (Au-ZnO)/exfoliated tungsten diselenide (exfoliated WSe₂) nanocomposite-based gas sensor toward benzene with high sensing properties was demonstrated. Epoxy resin was used as the matrix of the Au-ZnO/exfoliated WSe₂ nanocomposite sensor. The straw-shaped Au-ZnO was synthesized by the hydrothermal method, and WSe₂ nanosheets (NSs) were prepared via hydrothermal and liquid-phase exfoliation methods. The properties of Au-ZnO/exfoliated WSe₂ nanoheterostructures constructed by self-assembly technology have been confirmed via a series of characterization methods. The benzene-sensing performances of sensors were tested at 25 °C. Compared with Au-ZnO, WSe_2, and their composites, the Au-ZnO/exfoliated WSe₂ sensor has a significant performance improvement, including a higher response and linear fit degree, better selectivity and repeatability, and faster detection rate. The significantly enhanced sensing properties of the Au-ZnO/exfoliated WSe₂ sensor can be ascribed to the doping of Au nanoparticles, the increase in the specific surface area and adsorption sites of NSs after exfoliation, and the cooperative interface combination of the ZnO/WSe₂ heterojunction. Furthermore, the sensitivity mechanism of the composite sensor to benzene was explored by density functional theory simulations.

Molecular dynamics simulations of alkaline earth metal ions binding to DNA reveal ion size and hydration effects

Classical molecular dynamics simulations reveal size-dependent trends of alkaline earth metal ions binding to DNA are due to ion size and hydration behavior.

Encapsulation of a Monolayer WSe2 Phototransistor with Hydrothermally Grown ZnO Nanorods

Transition metal dichalcogenides (TMDCs) are promising two-dimensional (2D) materials for realizing next-generation electronics and optoelectronics with attractive physical properties. However, monolayer TMDCs (^1LTMDCs) have various serious issues, such as instability under ambient conditions and low optical quantum yield from their extremely thin thickness of ∼0.7 nm. To overcome these issues, we constructed a hybrid structure (HS) by growing zinc oxide nanorods (ZnO NRs) on a monolayer tungsten diselenide (^1LWSe₂) using the hydrothermal method. Consequently, we confirmed not only enhanced photoluminescence of ^1LWSe₂ but also improved optoelectronic properties by fabricating the HS phototransistor. Through various investigations, we found that these phenomena were due to the antenna and p-type doping effects attributed to the ZnO NRs. In addition, we verified that the optoelectronic properties of ^1LTMDCs are maintained for 2 weeks in ambient condition through the sustainable encapsulation effect induced by our HS. This encapsulation method with inorganic materials is expected to be applied to improve the stability and performance of various emerging 2D material-based devices.

A Double Support Layer for Facile Clean Transfer of Two-Dimensional Materials for High-Performance Electronic and Optoelectronic Devices

Clean transfer of two-dimensional (2D) materials grown by chemical vapor deposition is critical for their application in electronics and optoelectronics. Although rosin can be used as a support layer for the clean transfer of graphene grown on Cu, it has not been usable for the transfer of 2D materials grown on noble metals or for large-area transfer. Here, we report a poly(methyl methacrylate) (PMMA)/rosin double support layer that enables facile ultraclean transfer of large-area 2D materials grown on different metals. The bottom rosin layer ensures clean transfer, whereas the top PMMA layer not only screens the rosin from the transfer conditions but also improves the strength of the transfer layer to make the transfer easier and more robust. We demonstrate the transfer of monolayer WSe₂ and WS₂ single crystals grown on Au as well as large-area graphene films grown on Cu. As a result of the clean surface, the transferred WSe₂ retains the intrinsic optical properties of the as-grown sample. Moreover, it does not require annealing to form good ohmic contacts with metal electrodes, enabling high-performance field effect transistors with mobility and ON/OFF ratio ∼10 times higher than those made by PMMA-transferred WSe₂. The ultraclean graphene film is found to be a good anode for flexible organic photovoltaic cells with a high power conversion efficiency of ∼6.4% achieved.

Doping engineering and functionalization of two-dimensional metal chalcogenides

Two-dimensional (2D) layered metal chalcogenides (MXs) have significant potential for use in flexible transistors, optoelectronics, sensing and memory devices beyond the state-of-the-art technology. To pursue ultimate performance, precisely controlled doping engineering of 2D MXs is desired for tailoring their physical and chemical properties in functional devices. In this review, we highlight the recent progress in the doping engineering of 2D MXs, covering that enabled by substitution, exterior charge transfer, intercalation and the electrostatic doping mechanism. A variety of novel doping engineering examples leading to Janus structures, defect curing effects, zero-valent intercalation and deliberately devised floating gate modulation will be discussed together with their intriguing application prospects. The choice of doping strategies and sources for functionalizing MXs will be provided to facilitate ongoing research in this field toward multifunctional applications.

Different Microtubule Structures Assembled by Kinesin Motors

The microtubule-kinesin system is used to form microtubule-based structures via microtubule gliding motility. On the kinesin-coated surface, the microtubules can be easily assembled into stable micro- and nanostructures like circles and microtubule bundles using the streptavidin-biotin system. Furthermore, these microtubules structures can still retain performance with kinesin motor movement in spite of different velocities. Collisions bear responsibility for the majority of events leading to circle formation. By taking advantage of biological substances, some micro- or nanostructures, which are difficult to fabricate by artificial processes, can be easily obtained.

Enhanced exciton emission behavior and tunable band gap of ternary W(SxSe1-x)2 monolayer: temperature dependent optical evidence and first-principles calculations

Up to date, the electronic and optical properties of WS2 and WSe2 have been widely explored. However, the synthesis and characterization of their ternary alloy nanosheets have been rarely reported. Here, we fabricated single layer W(SxSe1-x)2 nanosheets by a one-step chemical vapor deposition (CVD) method. It is demonstrated that exciton emission behavior of single layer W(SxSe1-x)2 nanosheets (0 ≤ x ≤ 1) can be remarkably tuned by changing the sulfur content. The theoretical calculations proved that single layer W(SxSe1-x)2 alloy has a direct gap, and the band gap can be tuned by the sulfur content, which is in accordance with the spectral experiments. Moreover, we present temperature-dependent photoluminescence (PL) measurements in monolayers of W(SxSe1-x)2 alloys from 80 K to 320 K. The neutral exciton (X) and charged exciton (trion, T) can be observed at all measured temperatures. In sulfur-rich ternary W(SxSe1-x)2 alloys, the trion dominates the PL spectra at low temperatures while the exciton dominates the PL spectra at higher temperatures. In selenium-rich ternary alloys, however, the exciton is dominant in PL spectra at all measured temperatures. As the sulfur content gradually increases, the intensity ratio of the trion to exciton becomes dramatically larger. There is an obvious upward trend of the trion intensity in W(SxSe1-x)2 monolayers, which results from the significant growth of the two-dimensional electron gas (2DEG) concentration. On the other hand, the strong exciton-trion coupling mediated by an optical phonon also contributes to this improvement. These results indicate that exciton emission behavior of W(SxSe1-x)2 monolayers is controllable with the sulfur content. It highlights the importance of further detailed characterization on exciton features in ternary alloy nanosheets, and can enable spectral tunability for potential optoelectronic applications.