Thermoacoustic sound projector: exceeding the fundamental efficiency of carbon nanotubes

Intelligent, Flexible Artificial Throats with Sound Emitting, Detecting, and Recognizing Abilities

In recent years, there has been a notable rise in the number of patients afflicted with laryngeal diseases, including cancer, trauma, and other ailments leading to voice loss. Currently, the market is witnessing a pressing demand for medical and healthcare products designed to assist individuals with voice defects, prompting the invention of the artificial throat (AT). This user-friendly device eliminates the need for complex procedures like phonation reconstruction surgery. Therefore, in this review, we will initially give a careful introduction to the intelligent AT, which can act not only as a sound sensor but also as a thin-film sound emitter. Then, the sensing principle to detect sound will be discussed carefully, including capacitive, piezoelectric, electromagnetic, and piezoresistive components employed in the realm of sound sensing. Following this, the development of thermoacoustic theory and different materials made of sound emitters will also be analyzed. After that, various algorithms utilized by the intelligent AT for speech pattern recognition will be reviewed, including some classical algorithms and neural network algorithms. Finally, the outlook, challenge, and conclusion of the intelligent AT will be stated. The intelligent AT presents clear advantages for patients with voice impairments, demonstrating significant social values.

Guidelines for higher efficiency supported thermo-acoustic emitters based on periodically Joule heated metallic films

The paper focuses on the evaluation of the impact associated with various geometrical and material properties on the overall acoustic performance of generic multi-layer thermo-acoustic sources. First, a generalized numerical framework is developed using a state-of-the-art thermo-acoustic emission model for multi-layered devices and is used to forecast the effects associated with different parameters (thickness, density, thermal conductivity, and specific heat capacity), based on a set of 65 536 simulated architectures. Then, the acoustic facility is designed, assembled, and instrumented, and the findings of the simulation campaign are validated against experimental measurements for 32 different samples, manufactured via various vacuum deposition techniques. The results of the experimental campaign corroborate the simulation's prediction and indicate that the variables that have the strongest impact on the thermo-acoustic performance are the thicknesses of the substrate and thermophone layers, as well as the backing's thermal conductivity. Finally, the experimental results are directly comparable with the simulation predictions and the deviation between the two values is within the limits of the experimental accuracy, with an average deviation of 12% (maximal divergence of 28%) and best absolute performance of 0.018 Pa/W when measured from a distance of 75 mm. Overall, the findings provide an insight into the effect of analyzed properties and offer a set of tangible guidelines that can be applied in the future toward the design optimization process that can potentially result in higher-efficiency thermophone-on-substrate thermo-acoustic emitters.

A Review on the Applications of Graphene in Mechanical Transduction

A pressing need to develop low-cost, environmentally friendly, and sensitive sensors has arisen with the advent of the always-connected paradigm of the internet-of-things (IoT). In particular, mechanical sensors have been widely studied in recent years for applications ranging from health monitoring, through mechanical biosignals, to structure integrity analysis. On the other hand, innovative ways to implement mechanical actuation have also been the focus of intense research in an attempt to close the circle of human-machine interaction, and move toward applications in flexible electronics. Due to its potential scalability, disposability, and outstanding properties, graphene has been thoroughly studied in the field of mechanical transduction. The applications of graphene in mechanical transduction are reviewed here. An overview of sensor and actuator applications is provided, covering different transduction mechanisms such as piezoresistivity, capacitive sensing, optically interrogated displacement, piezoelectricity, triboelectricity, electrostatic actuation, chemomechanical and thermomechanical actuation, as well as thermoacoustic emission. A critical review of the main approaches is presented within the scope of a wider discussion on the future of this so-called wonder material in the field of mechanical transduction.

Graphene-Based Thermoacoustic Sound Source

Thermoacoustic (TA) effect has been discovered for more than 130 years. However, limited by the material characteristics, the performance of a TA sound source could not be compared with magnetoelectric and piezoelectric loudspeakers. Recently, graphene, a two-dimensional material with the lowest heat capacity per unit area, was discovered to have a good TA performance. Compared with a traditional sound source, graphene TA sound sources (GTASSs) have many advantages, such as small volume, no diaphragm vibration, wide frequency range, high transparency, good flexibility, and high sound pressure level (SPL). Therefore, graphene has a great potential as a next-generation sound source. Photoacoustic (PA) imaging can also be applied to the diagnosis and treatment of diseases using the photothermo-acoustic (PTA) effect. Therefore, in this review, we will introduce the history of TA devices. Then, the theory and simulation model of TA will be analyzed in detail. After that, we will talk about the graphene synthesis method. To improve the performance of GTASSs, many strategies such as lowering the thickness and using porous or suspended structures will be introduced. With a good PTA effect and large specific area, graphene PA imaging and drug delivery is a promising prospect in cancer treatment. Finally, the challenges and prospects of GTASSs will be discussed.

Emerging Functions of Nanostructured Porous Silicon-With a Focus on the Emissive Properties of Photons, Electrons, and Ultrasound

Recent topics of application studies on porous silicon (PS) are reviewed here with a focus on the emissive properties of visible light, quasiballistic hot electrons, and acoustic wave. By exposing PS in solvents to pulse laser, size-controlled nc-Si dot colloids can be formed through fragmentation of the PS layer with a considerably higher yield than the conventional techniques such as laser ablation of bulk silicon and sol-gel precursor process. Fabricated colloidal samples show strong visible photoluminescence (~40% in quantum efficiency in the red band). This provides an energy- and cost-effective route for production of nc-Si quantum dots. A multiple-tunneling transport mode through nc-Si dot chain induces efficient quasiballistic hot electron emission from an nc-Si diode. Both the efficiency and the output electron energy dispersion are remarkably improved by using monolayer graphene as a surface electrode. Being a relatively low operating voltage device compatible with silicon planar fabrication process, the emitter is applicable to mask-less parallel lithography under an active matrix drive. It has been demonstrated that the integrated 100 × 100 emitter array is useful for multibeam lithography and that the selected emission pattern is delineated with little distortion. Highly reducing activity of emitted electrons is applicable to liquid-phase thin film deposition of metals (Cu) and semiconductors (Si, Ge, and SiGe). Due to an extremely low thermal conductivity and volumetric heat capacity of nc-Si layer, on the other hand, thermo-acoustic conversion is enhanced to a practical level. A temperature fluctuation produced at the surface of nc-Si layer is quickly transferred into air, and then an acoustic wave is emitted without any mechanical vibrations. The non-resonant and broad-band emissivity with low harmonic distortions makes it possible to use the emitter for generating audible sound under a full digital drive and reproducing complicated ultrasonic communication calls between mice.

Pulsed Microwave-Pumped Drug-Free Thermoacoustic Therapy by Highly Biocompatible and Safe Metabolic Polyarginine Probes

Serious side effects are plaguing traditional chemotherapy, and the development of drug-free treatment is expected to ease the dilemma. Herein, drug-free polyarginine probes are fabricated from the co-polymerization of arginine monomer and slight amount of rhodamine B monomer, which are efficient for thermoacoustic imaging and therapy with high biocompatibility and safe metabolism. Polyarginine can be strongly pumped upon pulsed microwave irradiation, generating significant thermoacoustic shockwaves, namely thermocavitation, which can in situ destroy mitochondria to initiate programmed cancer cell apoptosis. In vivo explorations demonstrate the high theranostic efficiency for cancer thermoacoustic imaging and cancer inhibition, exhibiting low systemic cytotoxicity and good biocompatibility after systemic administration. Herein, pulsed microwave-pumped biocompatible polyarginine is promising for drug-free precision theranostics without any detectable side effects, and the deep penetration potency of microwave makes it potentially able to treat deep-seated diseases in future biomedicine.