Manipulating nanoscale structure to control functionality in printed organic photovoltaic, transistor and bioelectronic devices

Printed Electrodes Based on Vanadium Dioxide and Gold Nanoparticles for Asymmetric Supercapacitors

Printed energy storage components attracted attention for being incorporated into bendable electronics. In this research, a homogeneous and stable ink based on vanadium dioxide (VO2) is hydrothermally synthesized with a non-toxic solvent. The structural and morphological properties of the synthesized material are determined to be well-crystalline monoclinic-phase nanoparticles. The charge storage mechanisms and evaluations are specified for VO2 electrodes, gold (Au) electrodes, and VO2/Au electrodes using cyclic voltammetry, galvanostatic charge-discharge, and electrochemical impedance spectroscopy. The VO2 electrode shows an electrical double layer and a redox reaction in the positive and negative voltage ranges with a slightly higher areal capacitance of 9 mF cm-2. The VO2/Au electrode exhibits an areal capacitance of 16 mF cm-2, which is double that of the VO2 electrode. Due to the excellent electrical conductivity of gold, the areal capacitance 18 mF cm-2 of the Au electrode is the highest among them. Based on that, Au positive electrodes and VO2 negative electrodes are used to build an asymmetric supercapacitor. The device delivers an areal energy density of 0.45 μWh cm-2 at an areal power density of 70 μW cm-2 at 1.4 V in the aqueous electrolyte of potassium hydroxide. We provide a promising electrode candidate for cost-effective, lightweight, environmentally friendly printed supercapacitors.

Technology Roadmap for Flexible Sensors

Humans rely increasingly on sensors to address grand challenges and to improve quality of life in the era of digitalization and big data. For ubiquitous sensing, flexible sensors are developed to overcome the limitations of conventional rigid counterparts. Despite rapid advancement in bench-side research over the last decade, the market adoption of flexible sensors remains limited. To ease and to expedite their deployment, here, we identify bottlenecks hindering the maturation of flexible sensors and propose promising solutions. We first analyze challenges in achieving satisfactory sensing performance for real-world applications and then summarize issues in compatible sensor-biology interfaces, followed by brief discussions on powering and connecting sensor networks. Issues en route to commercialization and for sustainable growth of the sector are also analyzed, highlighting environmental concerns and emphasizing nontechnical issues such as business, regulatory, and ethical considerations. Additionally, we look at future intelligent flexible sensors. In proposing a comprehensive roadmap, we hope to steer research efforts towards common goals and to guide coordinated development strategies from disparate communities. Through such collaborative efforts, scientific breakthroughs can be made sooner and capitalized for the betterment of humanity.

Bio-hybrid electronic and photonic devices

Bio-hybrid devices, combining electronic and photonic components with cells, tissues, and organs, hold potential for advancing our understanding of biology, physiology, and pathologies and for treating a wide range of conditions and diseases. In this review, I describe the devices, materials, and technologies that enable bio-hybrid devices and provide examples of their utilization at multiple biological scales ranging from the subcellular to whole organs. Finally, I describe the outcomes of a National Science Foundation (NSF)-funded workshop envisioning potential applications of these technologies to improve health outcomes and quality of life.

Flexible Polymer X-ray Detectors with Non-fullerene Acceptors for Enhanced Stability: Toward Printable Tissue Equivalent Devices for Medical Applications

There is growing interest in the development of novel materials and devices capable of ionizing radiation detection for medical applications. Organic semiconductors are promising candidates to meet the demands of modern detectors, such as low manufacturing costs, mechanical flexibility, and a response to radiation equivalent to human tissue. However, organic semiconductors have typically been employed in applications that convert low energy photons into high current densities, for example, solar cells and LEDs, and thus existing design rules must be re-explored for ionizing radiation detection where high energy photons are converted into typically much lower current densities. In this work, we report the optoelectronic and X-ray dosimetric response of a tissue equivalent organic photodetector fabricated with solution-based inks prepared from polymer donor poly(3-hexylthiophene) (P3HT) blended with either a non-fullerene acceptor (5Z,5'Z)-5,5'-((7,7'-(4,4,9,9-tetraoctyl-4,9-dihydro-s-indaceno[1,2-b:5,6-b']dithiophene-2,7-diyl)bis(benzo[c][1,2,5]thiadiazole-7,4-diyl))bis(methanylylidene))bis(3-ethyl-2-thioxothiazolidin-4-one) (o-IDTBR) or a fullerene acceptor, [6,6]-phenyl-C61-butyric acid methyl ester (PCBM). Indirect detection of X-rays was achieved via coupling of organic photodiodes with a plastic scintillator. Both detectors displayed an excellent response linearity with dose, with sensitivities to 6 MV photons of 263.4 ± 0.6 and 114.2 ± 0.7 pC/cGy recorded for P3HT:PCBM and P3HT:o-IDTBR detectors, respectively. Both detectors also exhibited a fast temporal response, able to resolve individual 3.6 μs pulses from the linear accelerator. Energy dependence measurements highlighted that the photodetectors were highly tissue equivalent, though an under-response in devices compared to water by up to a factor of 2.3 was found for photon energies of 30-200 keV due to the response of the plastic scintillator. The P3HT:o-IDTBR device exhibited a higher stability to radiation, showing just an 18.4% reduction in performance when exposed to radiation doses of up to 10 kGy. The reported devices provide a successful demonstration of stable, printable, flexible, and tissue-equivalent radiation detectors with energy dependence similar to other scintillator-based detectors used in radiotherapy.

High-performance ternary organic photovoltaics with NC70BA as the third component material enabling thickness-insensitive photoactive performance

In this work, a thinner (100 nm) and thicker (150 and 200 nm) ternary organic photovoltaic (OPV) are fabricate by D18 as donor, Y6 as acceptor and NC₇₀BA as third component materials. The addition of the hollow 3D spherical structure of NC₇₀BA into D18:Y6 binary films is helpful for improving phase separation and smooth surface of ternary photoactive layer, and form more continuous electron transport channels in ternary photoactive layers. It is enhance photovoltaic performance under not only thinner photoactive layer thickness but also thicker photoactive layer thickness. Our results demonstrate the feasibility of employing D18:Y6 as a binary photovoltaic layer and fullerene derivative NC₇₀BA as a third component material and has construct high-efficiency thickness-insensitive ternary OPVs; this approach would promote the development of thicker photoactive layer ternary OPVs to fulfill the requirements of solution coating processes.

Advanced Control of Drug Delivery for In Vivo Health Applications via Highly Biocompatible Self-Assembled Organic Nanoparticles

The use of nanostructured materials for targeted and controlled delivery of bioactive molecules is an attractive alternative to conventional drug administration protocols, enabling selective targeting of diseased cells, lower administered dosages, and reduced systemic side effects. Although a variety of nanocarriers have been investigated in recent years, electroactive organic polymer nanoparticles present several exciting advantages. Here we demonstrate that thin films created from nanoparticles synthesized from violanthrone-79, an n-type semiconducting organic material, can incorporate and release dexamethasone in vitro in a highly controlled manner. By systematically altering the nanoparticle formation chemistry, we successfully tailored the size of the nanoparticles between 30 and 145 nm to control the initial amount of drug loaded into the organic particles. The biocompatibility of the different particles was tested using live/dead assays of dorsal root ganglion neurons isolated and cultured from mice, revealing that elevated levels of the sodium dodecyl sulfate surfactant used to create the smaller nanoparticles are cytotoxic; however, cell survival rates in nanoparticles larger than 45 nm exceed 86% and promote neurite growth and elongation. By manipulating the electrical stimulus applied to the electroactive nanoparticle films, we show an accelerated rate of drug release in comparison to passive release in aqueous media. Furthermore, pulsing the electrical stimulus was successfully used to selectively switch the accelerated release rate on and off. By combining the tuning of drug loading (through tailored nanoparticle synthesis) and drug release rate (through electrical stimulus protocols), we demonstrate a highly advanced control of drug delivery dosage in a biocompatible delivery vehicle. This work highlights the significant potential of electroactive organic nanoparticles for implantable devices that can deliver corticosteroids directly to the nervous system for the treatment of inflammation associated with neurological disorders, presenting a translatable pathway toward precision nanomedicine approaches for other drugs and diseases.

Controlling Nanostructure in Inkjet Printed Organic Transistors for Pressure Sensing Applications

This work reports the development of a highly sensitive pressure detector prepared by inkjet printing of electroactive organic semiconducting materials. The pressure sensing is achieved by incorporating a quantum tunnelling composite material composed of graphite nanoparticles in a rubber matrix into the multilayer nanostructure of a printed organic thin film transistor. This printed device was able to convert shock wave inputs rapidly and reproducibly into an inherently amplified electronic output signal. Variation of the organic ink material, solvents, and printing speeds were shown to modulate the multilayer nanostructure of the organic semiconducting and dielectric layers, enabling tuneable optimisation of the transistor response. The optimised printed device exhibits rapid switching from a non-conductive to a conductive state upon application of low pressures whilst operating at very low source-drain voltages (0–5 V), a feature that is often required in applications sensitive to stray electromagnetic signals but is not provided by conventional inorganic transistors and switches. The printed sensor also operates without the need for any gate voltage bias, further reducing the electronics required for operation. The printable low-voltage sensing and signalling system offers a route to simple low-cost assemblies for secure detection of stimuli in highly energetic systems including combustible or chemically sensitive materials.

Synergistic effect of CdSe quantum dots (QDs) and PC61BM on ambient-air processed ZnO QDs/PCDTBT: PC61BM:CdSe QDs/MoO3 based ternary organic solar cells

This paper reports the synergistic effect of colloidal CdSe quantum dots (QDs) and PC₆₁BM on the performance of ITO/ZnO QDs/PCDTBT:PC₆₁BM:CdSe QDs/MoO₃/Ag based ternary organic solar cells (OSCs). The MoO₃ and ZnO QDs (∼2.87 nm) layers work as the transparent hole transport layer (HTL) and electron transport layer (ETL), respectively. The CdSe QDs (∼4.58 nm) are blended with PC₆₁BM:PCDTBT binary solution to improve the optical properties and charge transportation. Significant photoluminescence (PL) quenching is observed when part of the PC₆₁BM is replaced by CdSe QDs with equivalent weight in the PCDTBT. The proposed ternary OSC gives an open-circuit voltage of 854 mV, a short circuit current density of 14 mA cm^-2, fill factor of 42% and power conversion efficiency (PCE) of 5.02%. The PCE of the ternary OSC is increased by more than 38% compared to the binary OSC. This significant improvement in the performance parameters is attributed to the enhanced absorption and higher transportation of photo-generated charge carriers, as well as the increased charge dissociation due to the synergistic effect of CdSe QDs and PC₆₁BM. The external quantum efficiency is also enhanced significantly in the ternary OSC due to the better conversion of solar energy into electrical energy.

Characterization of an organic semiconductor diode for dosimetry in radiotherapy

PURPOSE

The development of novel detectors for dosimetry in advanced radiotherapy modalities requires materials that have a water equivalent response to ionizing radiation such that characterization of radiation beams can be performed without the need for complex calibration procedures and correction factors. Organic semiconductors are potentially an ideal technology in fabricating devices for dosimetry due to tissue equivalence, mechanical flexibility, and relatively cheap manufacturing cost. The response of a commercial organic photodetector (OPD), coupled to a plastic scintillator, to ionizing radiation from a linear accelerator and orthovoltage x-ray tube has been characterized to assess its potential as a dosimeter for radiotherapy. The radiation hardness of the OPD has also been investigated to demonstrate its longevity for such applications.

METHODS

Radiation hardness measurements were achieved by observing the response of the OPD to the visible spectrum and 70 keV x rays after pre-exposure to 40 kGy of ionizing radiation. The response of a preirradiated OPD to 6-MV photons from a linear accelerator in reference conditions was compared to a nonirradiated OPD with respect to direct and indirect (RP400 plastic scintillator) detection mechanisms. Dose rate dependence of the OPD was measured by varying the surface-to-source distance between 90 and 300 cm. Energy dependence was characterized from 29.5 to 129 keV with an x-ray tube. The percentage depth dose (PDD) curves were measured from 0.5 to 20 cm and compared to an ionization chamber.

RESULTS

The OPD sensitivity to visible light showed substantial degradation of the broad 450 to 600 nm peak from the donor after irradiation to 40 kGy. After irradiation, the spectral shape has a dominant absorbance peak at 370 nm, as the acceptor better withstood radiation damage. Its response to x rays stabilized to 30% after 35 kGy, with a 0.5% difference between 770 Gy increments. The OPD exhibited reproducible detection of ionizing radiation when coupled with a scintillator. Indirect detection showed a linear response from 25 to 500 cGy and constant response to dose rates from 0.31 Gy/pulse to 3.4 × 10^-4  Gy/pulse. However, without the scintillator, response increased by 100% at low dose rates. Energy independence between 100 keV and 1.2 MeV advocates their use as a dosimeter without beam correction factors. A dependence on the scintillator thickness used during a comparison of the PDD to the ionizing chamber was identified. A 1-mm-thick scintillator coupled with the OPD demonstrated the best agreement of ± 3%.

CONCLUSIONS

The response of OPDs to ionizing radiation has been characterized, showing promising use as a dosimeter when coupled with a plastic scintillator. The mechanisms of charge transport and trapping within organic materials varies for visible and ionizing radiation, due to differing properties for direct and indirect detection mechanisms and observing a substantial decrease in sensitivity to the visible spectrum after 40 kGy. This study proved that OPDs produce a stable response to 6-MV photons, and with a deeper understanding of the charge transport mechanisms due to exposure to ionizing radiation, they are promising candidates as the first flexible, water equivalent, real-time dosimeter.