Alkali-cation-incorporated and functionalized iron oxide nanoparticles for methyl blue removal/decomposition

MXene/ZnS/chitosan-cellulose composite with Schottky heterostructure for efficient removal of anionic dyes by synergistic effect of adsorption and photocatalytic degradation

Nowadays, dye water pollution is becoming increasingly severe. Composite of MXene, ZnS, and chitosan-cellulose material (MX/ZnS/CC) was developed to remove anionic dyes through the synergistic effect of adsorption and photocatalytic degradation. MXene was introduced as the cocatalyst to form Schottky heterostructure with ZnS for improving the separation efficiency of photocarriers and photocatalytic performance. Chitosan-cellulose material mainly served as the dye adsorbent, while also could improve material stability and assist in generation of free radicals for dye degradation. The physics and chemistry properties of MX/ZnS/CC composite were systematically inspected through various characterizations. MX/ZnS/CC composite exhibited good adsorption ability to anionic dyes with adsorption capacity up to 1.29 g/g, and excellent synergistic effects of adsorption and photodegradation with synergistic removal capacity up to 5.63 g/g. MX/ZnS/CC composite performed higher synergistic removal ability and better optical and electrical properties than pure MXene, ZnS, chitosan-cellulose material, and MXene/ZnS. After compounding, the synergistic removal percentage of dyes increased by a maximum of 309 %. MX/ZnS/CC composite mainly adsorbs anionic dyes through electrostatic interactions and catalyzes the generation of •O2-, h+, and •OH to degrade dyes, which has been successfully used to remove anionic dyes from environmental water, achieving a 100 % removal of 50 mg/L dye.

Photocatalytic degradation of methyl blue dye with H2O2 sensing

A condensation polymer (urea-formaldehyde resin) passivated ZnO nanoparticles were used as an efficient photocatalyst for methyl blue degradation in the presence of H2O2 involving a Fenton-like reaction. The formation of OH˙ radicals were attributed to the pivotal factor for the degradation process. The method was easy and recyclable. The dose of photocatalyst, initial dye concentration, pH variation, variations of the composition of the photocatalyst, and the effect of scavengers were gauged. The degraded product was highly fluorescent and fluorometric detection of H2O2 was achieved along with a colorimetric recognition pathway. No other dye could be degraded under similar experimental conditions, implying the novel utility of methyl blue for environmental remediation.

Simultaneous precipitation and discharge plasma processing for one-step synthesis of α-Fe2O3-Fe3O4/graphene visible light magnetically separable photocatalysts

A novel facile combination of precipitation and plasma discharge reaction is successfully employed for one-step synthesis of an α-Fe₂O₃-Fe₃O₄ graphene nanocomposite (GFs). The co-existence and anchoring of hematite (α-Fe₂O₃) and magnetite (Fe₃O₄) nanoparticles onto a graphene sheet in the as synthesized GFs were verified by results of XRD, Raman, SEM, TEM, and XPS. HRTEM characterization was used for confirming the bonding between α-Fe₂O₃/Fe₃O₄ nanoparticles and the graphene sheet. Consequently, GFs shows superior photodegrading performance towards methylene blue (MB), compared to individual α-Fe₂O₃/Fe₃O₄ nanoparticles, as a result of band gap narrowing and the electron-hole pair recombination rate reducing. Moreover, GFs allows a good possibility of separating and recycling under an external-magnetic field, suggesting potential in visible-light-promoted photocatalytic applications.

Mössbauer spectroscopic investigations on iron oxides and modified nanostructures: A review

Pure and doped iron oxide and hydroxide nanoparticles are highly potential materials for biological, environment, energy and other technological applications. On demand of the applications, single phase as well as multiple phase of different polymorphs or composites of iron oxides with compatible materials for example, zeolite, SiO₂, or Au are prepared. The properties of the as-synthesized nanoparticles are predominantly dictated by the local structure and the distribution of the cations. Mössbauer spectroscopy is a perfect and efficient characterization technique to investigate the local structure of the Mössbauer-active element such as Fe, Au, and Sn. In the present review, the local structure transformation on the optimization of the magnetite coexisted with iron hydroxides, spin dynamics of the bare, caped, core-shell and the composites of iron oxide nanoparticles (IONPs), dipole-dipole interactions and the diffusion of IONPs were discussed, based on the findings using Mössbauer spectroscopy.

Enhance pore structure of cyanobacteria-based porous carbon by polypropylene to improve adsorption capacity of methylene blue

Porous carbon obtained by co-pyrolysis of plastic and biomass has received a lot of attention due to its excellent adsorption properties, and the pore structure plays an essential role in adsorption performance, however, the pore structure is still not well understood. Herein, we synthesized cyanobacteria-based porous carbon derived from cyanobacteria and polypropylene plastic by one-step method. CPC-800-30% exhibited a high BET surface area (2140 m²/g), pore volume up to 1.44 cm³/g. PP not only improved the pore structure of porous carbon, but also enriched the types of functional groups, such as O-H, N-H, C=O, and -CH, due to dehydroxylation or amino group decreased, resulting in the hydrogen radicals increased, hence PP had positive effect for biomass during co-pyrolysis. Meanwhile, CPC-800-30% showed excellent methylene blue (MB) adsorption capacity (667 mg/g). This work provided a new strategy for enhancing porous carbon structure via using PP as additive.

Polyethyleneimine grafted starch nanocrystals as a novel biosorbent for efficient removal of methyl blue dye

In this paper, a novel biosorbent of SNCs-PEI was successfully prepared by grafting polyethylenimine (PEI) onto the starch nanocrystals (SNCs) using glutaraldehyde as a crosslinking agent. The optimal preparation conditions of SNCs-PEI were determined by the orthogonal experiments of the three-factor and three-level, and the SNCs-PEI was characterized by Fourier transform infrared spectroscopy (FT-IR), energy-dispersive X-ray spectroscopy (EDAX), X-ray diffraction (XRD), and scanning electron microscopy (SEM). The zeta potential of SNCs-PEI was +26.3 mV (pH 7), which had a good adsorption performance for the anionic dye methyl blue (MB). The adsorption kinetics and isotherm of MB by SNCs-PEI were studied. At the temperature of 25, 30 and 35 °C, its maximum adsorption capacity was 337.84, 377.36 and 383.14 mg g^-1, respectively. The adsorption of MB by the SNCs-PEI was a spontaneous and endothermic process according to the thermodynamic analysis.

Interface of GO with SnO2 quantum dots as an efficient visible-light photocatalyst

Graphene oxide (GO) with beneficial functional groups regulates the surface chemistry for catalytic applications. However, the low electrical conductivity of GO invokes further treatments that compromise the above-valued properties. We report an interfacial engineering of GO decorated with SnO₂ quantum dots (QDs) for the visible-light-driven catalysis of dye degradation. Retention of beneficial functional features of GO and QDs in the GO-SnO₂ composite is established by using TEM, FTIR, and Raman spectroscopy techniques. Further, investigations with EXAFS and lifetime-measurements provide the local structure and defects distributions in QDs which are correlated with the improved conductivity. PL and electrochemical impedance spectroscopic measurements help unraveling the charge-transfer across the interface of the GO-SnO₂ composite. The unique ability of ∼94% degradation of MB using only 0.5 mg of GO-SnO₂ catalyst within half an hour under the visible light is demonstrated for the first time with insights on the photocatalytic mechanism.