Magnetic nanowires in biomedical applications

Cells have the ability to break and chemically modify GaP(As) nanowires

Semiconductor nanowires are known for their unusual geometry, providing unique electronic and optical properties. Substrates with vertical nanowires have highly non-uniform surfaces, which are attractive in terms of the study of live cells that can interact and be labeled with the wires. Despite several previous works studying cells cultivated over nanowires, questions regarding cell rupture and interaction with the wires remain open. Here, we demonstrate that nanowires can not only penetrate the cell membrane, but even be broken by a cell and trapped inside it. Even after mechanical poration of the membrane manifested by the efficient transfection and delivery of a fluorescent protein encoding plasmid, the cells are found to be viable for 7 days of incubation. The endocytosed wires are then aligned along the nucleus periphery and ousted to pseudopodia with the formation of nanowire-rich fibrils as a result of complex intracellular processes. We demonstrate that endocytosis of the wires may lead to their chemical modification manifested by the red shift of the luminescence spectra. Analysis of the wires' breakdown reveals that the cells can generate forces as high as several hundreds of nN. Using this work, we demonstrate several phenomena with the potential to be used in intriguing methods for intracellular visualization and the development of biointerfaces.

Direct visualization of domain wall pinning in sub-100 nm 3D magnetic nanowires with cross-sectional curvature

The study of 3D magnetic nanostructures has uncovered rich phenomena including the stabilization of topological spin textures using nanoscale curvature, controlled spin-wave emission, and novel ground states enabled by collective frustrated interactions. From a technological perspective, 3D nanostructures offer routes to ultrahigh density data storage, massive interconnectivity within neuromorphic devices, as well as mechanical induction of stem cell differentiation. However, the fabrication of 3D nanomagnetic systems with feature sizes down to 10 nm poses a significant challenge. Here we present a means of fabricating sub-100 nm 3D ferromagnetic nanowires, with both cross-sectional and longitudinal curvature, using two-photon lithography at a wavelength of 405 nm, combined with conventional deposition. Nanostructures with lateral features as low as 70 nm can be rapidly and reproducibly fabricated. A range of novel domain walls, with anti-vortex textures and hybrid vortex/anti-vortex textures are enabled by the cross-sectional curvature of the system, as demonstrated by micromagnetic simulations. Magnetic force microscopy experiments in an externally applied magnetic field are used to image the injection and pinning of domain walls in the 3D magnetic nanowire. At specific field values, domain walls are observed to hop from trap to trap, providing a direct means to probe the local energy landscape.

Stability and Spin Waves of Skyrmion Tubes in Curved FeGe Nanowires

In this work, we investigate the influence of curvature on the dynamic susceptibility in FeGe nanowires, both curved and straight, hosting a skyrmionic tube texture under the action of an external bias field, using micromagnetic simulations. Our results demonstrate that both the resonance frequencies and the number of resonant peaks are highly dependent on the curvature of the system. To further understand the nature of the spin wave modes, we analyze the spatial distributions of the resonant mode amplitudes and phases, describing the differences among resonance modes observed. The ability to control the dynamic properties and frequencies of these nanostructures underscores their potential application in frequency-selective magnetic devices.

Fabrication and Magnetic Behavior of Jellyfish-Like Ni Nanowires Synthesized Using Bilayered Nanoporous Anodic Alumina Templates

The potential to produce nanostructures with intricate shapes in large quantities holds promise for a range of applications in the fields of nanoelectronics and biomedicine. Here a method for fabricating jellyfish-like Ni nanowires (JFNWs) using bilayered nanoporous anodic alumina templates with through pores of varying diameters in each layer is presented. To assess the capabilities of this method, samples are created with different voltages during the second step of anodization, resulting in distinct geometrical characteristics of the second layer of the template, and subsequently synthesize Ni JFNWs. By employing magnetometry and first-order reversal curve (FORC) method, the magnetic properties are examined and a significant alteration in their magnetic behavior, attributed to the differing shapes of the JFNWs and the magnetostatic interactions within the array, is observed. The study utilizes magnetic force microscopy to evaluate the stray magnetic fields generated by the individual JFNWs and unveils their unusual and asymmetric distribution. Through simulations based on the experimental data, the study analyzes the field- and current-induced domain wall movement in a single JFNW and their array. The findings reveal non-trivial micromagnetic configurations in these structures, including a remarkable 'corkscrew' state, and allow for an examination of the process of magnetization switching.

A comprehensive review on the biomedical frontiers of nanowire applications

This comprehensive review examines the immense capacity of nanowires, nanostructures characterized by unbounded dimensions, to profoundly transform the field of biomedicine. Nanowires, which are created by combining several materials using techniques such as electrospinning and vapor deposition, possess distinct mechanical, optical, and electrical properties. As a result, they are well-suited for use in nanoscale electronic devices, drug delivery systems, chemical sensors, and other applications. The utilization of techniques such as the vapor-liquid-solid (VLS) approach and template-assisted approaches enables the achievement of precision in synthesis. This precision allows for the customization of characteristics, which in turn enables the capability of intracellular sensing and accurate drug administration. Nanowires exhibit potential in biomedical imaging, neural interfacing, and tissue engineering, despite obstacles related to biocompatibility and scalable manufacturing. They possess multifunctional capabilities that have the potential to greatly influence the intersection of nanotechnology and healthcare. Surmounting present obstacles has the potential to unleash the complete capabilities of nanowires, leading to significant improvements in diagnostics, biosensing, regenerative medicine, and next-generation point-of-care medicines.

Nanotechnology-based theranostic and prophylactic approaches against SARS-CoV-2

SARS-CoV-2 (COVID-19) pandemic has been an unpredicted burden on global healthcare system by infecting over 700 million individuals, with approximately 6 million deaths worldwide. COVID-19 significantly impacted all sectors, but it very adversely affected the healthcare system. These effects were much more evident in the resource limited part of the world. Individuals with acute conditions were also severely impacted. Although classical COVID-19 diagnostics such as RT-PCR and rapid antibody testing have played a crucial role in reducing the spread of infection, these diagnostic techniques are associated with certain limitations. For instance, drawback of RT-PCR diagnostics is that due to degradation of viral RNA during shipping, it can give false negative results. Also, rapid antibody testing majorly depends on the phase of infection and cannot be performed on immune compromised individuals. These limitations in current diagnostic tools require the development of nanodiagnostic tools for early detection of COVID-19 infection. Therefore, the SARS-CoV-2 outbreak has necessitated the development of specific, responsive, accurate, rapid, low-cost, and simple-to-use diagnostic tools at point of care. In recent years, early detection has been a challenge for several health diseases that require prompt attention and treatment. Disease identification at an early stage, increased imaging of inner health issues, and ease of diagnostic processes have all been established using a new discipline of laboratory medicine called nanodiagnostics, even before symptoms have appeared. Nanodiagnostics refers to the application of nanoparticles (material with size equal to or less than 100 nm) for medical diagnostic purposes. The special property of nanomaterials compared to their macroscopic counterparts is a lesser signal loss and an enhanced electromagnetic field. Nanosize of the detection material also enhances its sensitivity and increases the signal to noise ratio. Microchips, nanorobots, biosensors, nanoidentification of single-celled structures, and microelectromechanical systems are some of the most modern nanodiagnostics technologies now in development. Here, we have highlighted the important roles of nanotechnology in healthcare sector, with a detailed focus on the management of the COVID-19 pandemic. We outline the different types of nanotechnology-based diagnostic devices for SARS-CoV-2 and the possible applications of nanomaterials in COVID-19 treatment. We also discuss the utility of nanomaterials in formulating preventive strategies against SARS-CoV-2 including their use in manufacture of protective equipment, formulation of vaccines, and strategies for directly hindering viral infection. We further discuss the factors hindering the large-scale accessibility of nanotechnology-based healthcare applications and suggestions for overcoming them.

Preparation, characterization, and magnetic resonance imaging of Fe nanowires

A facile template method was employed to synthesize Fe nanowires of different sizes, dimensions. Comprehensive analyses were conducted to explore their morphology, structure, composition, and magnetic properties. The surface of as-prepared Fe nanowires was modified with SiO2 by sol-gel method to improve the dispersion of as-prepared Fe nanowires in aqueous solution. Furthermore, the relaxation properties, biocompatibility and in vivo imaging abilities of the Fe@SiO2 nanowires were evaluated. The study revealed that the SiO2-coated Fe nanowires functioned effectively as transverse relaxation time (T2) contrast agents (CAs). Notably, as the length of the Fe@SiO2 nanowires increased, their diameter decreased, leading to a higher the transverse relaxivity (r2) value. Our study identified that among the Fe nanowires synthesized, the Fe3@SiO2 nanowires, characterized by a diameter of around 30 nm and a length of approximately 500 nm, exhibited the highest r2 value of 59.3 mM-1 s-1. These nanowires demonstrated good biocompatibility and non-toxicity. Notably, upon conducting small animal imaging a 1.5 T with Sprague-Dawley rats, we observed a discernible negative enhancement effect in the liver. These findings indicate the promising potential of Fe@SiO2 nanowires as T2 CAs, with the possibility of tuning their size for optimized results.

Exploring the Magnetic Properties of Individual Barcode Nanowires using Wide-Field Diamond Microscopy

A barcode magnetic nanowire typically comprises a multilayer magnetic structure in a single body with more than one segment type. Interestingly, due to selective functionalization and novel interactions between the layers, it has attracted significant attention, particularly in bioengineering. However, analyzing the magnetic properties at the individual nanowire level remains challenging. Herein, the characterization of a single magnetic nanowire is investigated at room temperature under ambient conditions based on magnetic images obtained via wide-field quantum microscopy with nitrogen-vacancy centers in diamond. Consequently, critical magnetic properties of a single nanowire can be extracted, such as saturation magnetization and coercivity, by comparing the experimental result with that of micromagnetic simulation. This study opens up the possibility for a versatile in situ characterization method suited to individual magnetic nanowires.

Design and Evaluation of Composite Magnetic Iron-Platinum Nanowires for Targeted Cancer Nanomedicine

The purpose of the study was to synthesize and investigate the influence of geometrical structure, magnetism, and cytotoxic activity on core-shell platinum and iron-platinum (Fe/Pt) composite nanowires (NWs) for potential application in targeted chemotherapeutic approaches. The Pt-NWs and Fe/Pt composite NWs were synthesized via template electrodeposition, using anodic aluminum oxide (AAO) membranes. The Fe/Pt composite NWs (Method 1) was synthesized using two electrodeposition steps, allowing for greater control of the diameter of the NW core. The Fe/Pt composite NWs (Method 2) was synthesized by pulsed electrodeposition, using a single electrolytic bath. The properties of the synthesized NWs were assessed by high-resolution transmission electron microscopy (HRTEM), Raman spectroscopy, powder X-ray diffraction (XRD), inductively coupled plasma-optical emission spectrometry (ICP-OES), vibrating-sample magnetometry (VSM), and surface charge (zeta potential). A microscopy image analysis of the NWs revealed the presence of high-aspect-ratio NWs with nominal diameters of 40-50 nm and lengths of approximately <4 µm. The obtained powder XRD patterns confirmed the presence of a polycrystalline structure for both Pt NWs and Fe/Pt composite NWs. The potential utility of the synthesized NW nanoplatforms for anticancer activity was investigated using Tera 1 cells and Mouse 3T3 cells. Pt-NWs displayed modest cytotoxic activity against Tera 1 cells, while the Fe/Pt composite NWs (both Methods 1 and 2) demonstrated enhanced cytotoxic activity compared to the Pt-NWs on Tera 1 cells. The Fe/Pt composite NWs (Method 1) displayed ferromagnetic behavior and enhanced cytotoxic activity compared to Pt-NWs on Tera 1 cells, thus providing a sound basis for future magnetically targeted chemotherapeutic applications.

Exchange Bias Effect of Ni@(NiO,Ni(OH)2) Core/Shell Nanowires Synthesized by Electrochemical Deposition in Nanoporous Alumina Membranes

Tuning and controlling the magnetic properties of nanomaterials is crucial to implement new and reliable technologies based on magnetic hyperthermia, spintronics, or sensors, among others. Despite variations in the alloy composition as well as the realization of several post material fabrication treatments, magnetic heterostructures as ferromagnetic/antiferromagnetic coupled layers have been widely used to modify or generate unidirectional magnetic anisotropies. In this work, a pure electrochemical approach has been used to fabricate core (FM)/shell (AFM) Ni@(NiO,Ni(OH)₂) nanowire arrays, avoiding thermal oxidation procedures incompatible with integrative semiconductor technologies. Besides the morphology and compositional characterization of these core/shell nanowires, their peculiar magnetic properties have been studied by temperature dependent (isothermal) hysteresis loops, thermomagnetic curves and FORC analysis, revealing the existence of two different effects derived from Ni nanowires' surface oxidation over the magnetic performance of the array. First of all, a magnetic hardening of the nanowires along the parallel direction of the applied magnetic field with respect their long axis (easy magnetization axis) has been found. The increase in coercivity, as an effect of surface oxidation, has been observed to be around 17% (43%) at 300 K (50 K). On the other hand, an increasing exchange bias effect on decreasing temperature has been encountered when field cooling (3T) the oxidized Ni@(NiO,Ni(OH)₂) nanowires below 100 K along their parallel lengths.

Nanostructure-induced L10-ordering of twinned single-crystals in CoPt ferromagnetic nanowires

L10-ordered ferromagnetic nanowires with large coercivity are essential for realizing next-generation spintronic devices. Ferromagnetic nanowires have been commonly fabricated by first L10-ordering of initially disordered ferromagnetic films by annealing and then etching them into nanowire structures using lithography. If the L10-ordered nanowires can be fabricated using only lithography and subsequent annealing, the etching process can be omitted, which leads to an improvement in the fabrication process for spintronic devices. However, when nanowires are subjected to annealing, they easily transform into droplets, which is well-known as Plateau-Rayleigh instability. Here, we propose a concept of "nanostructure-induced L10-ordering" of twinned single-crystals in CoPt ferromagnetic nanowires with a 30 nm scale ultrafine linewidth on Si/SiO2 substrates. The driving forces for nanostructure-induced L10-ordering during annealing are atomic surface diffusion and extremely large internal stress at ultrasmall 10 nm scale curvature radii of the nanowires. (Co/Pt)6 multilayer nanowires are fabricated by a lift-off process combining electron-beam lithography and electron-beam evaporation, followed by annealing. Cross-sectional scanning transmission electron microscope images and nano-beam electron diffraction patterns clearly indicate nanostructure-induced L10-ordering of twinned single-crystals in the CoPt ferromagnetic nanowires, which exhibit a large coercivity of 10 kOe for perpendicular, longitudinal, and transversal directions of the nanowires. Two-dimensional grazing incidence X-ray diffraction shows superlattice peaks with Debye-Scherrer ring shapes, which also supports the nanostructure-induced L10-ordering. The fabrication method for nanostructure-induced L10-ordered CoPt ferromagnetic nanowires with twinned single-crystals on Si/SiO2 substrates would be significant for future silicon-technology-compatible spintronic applications.

Current density-induced emergence of soft and hard magnetic phases in Fe nanowire arrays

The capability of generating magnetically soft and hard phases in a material is important in many aspects, ranging from basic science to applications. Here, the emergence of soft and hard magnetic phases is reported in Fe nanowire (NW) arrays with a diameter of 35 nm fabricated by using a pulsed electrochemical deposition method in porous aluminum oxide templates under different current density (C_d) values in the range of 25-100 mA cm^-2. The variation ofC_dinfluences the grain size, crystallinity, electrodeposition efficiency and length of the Fe NWs, as characterized by x-ray diffraction, high-resolution transmission electron microscopy, vibrating sample magnetometry and field-emission scanning electron microscopy. IncreasingC_dfrom 25 to 80 mA cm^-2results in a significant decrease in coercivity and squareness from 1590 to 900 Oe and 0.9 to 0.5, respectively, inducing the soft and hard phases along the length of Fe NWs. Further increasing theC_dleads to the separation of the phases, as evidenced by first-order reversal curve analysis. From a theoretical aspect, the emergence of the soft phase may lead to the occurrence of the fanning reversal mode in the NWs, for which there is no precedent in previous experimental investigations.

Electrodeposited Magnetic Nanowires with Radial Modulation of Composition

In the last few years, magnetic nanowires have gained attention due to their potential implementation as building blocks in spintronics applications and, in particular, in domain-wall- based devices. In these devices, the control of the magnetic properties is a must. Cylindrical magnetic nanowires can be synthesized rather easily by electrodeposition and the control of their magnetic properties can be achieved by modulating the composition of the nanowire along the axial direction. In this work, we report the possibility of introducing changes in the composition along the radial direction, increasing the degrees of freedom to harness the magnetization. In particular, we report the synthesis, using template-assisted deposition, of FeNi (or Co) magnetic nanowires, coated with a Au/Co (Au/FeNi) bilayer. The diameter of the nanowire as well as the thickness of both layers can be tuned at will. In addition to a detailed structural characterization, we report a preliminary study on the magnetic properties, establishing the role of each layer in the global collective behavior of the system.

A Critical Review on Nanowire-Motors: Design, Mechanism and Applications

Nanowire-motors (NW-Ms) are promoting the rapid development of emerging biomedicine and environmental governance, and are an important branch of micro-nano motors in the development of nanotechnology. In recent years, huge research breakthroughs have been made in these fields in terms of the fascinating microstructure, conversion efficiency and practical applications of NW-Ms. This review article introduces the latest milestones in NW-Ms research, from production methods, driving mechanisms, control methods to targeted drug delivery, sewage detection, sensors and cell capture. The dynamics and physics of micro-nano devices are reviewed, and finally the current challenges and future research directions in this field are discussed. This review further aims to provide certain guidance for the driving of NW-Ms to meet the urgent needs of emerging applications.

Titanium and Iron Oxide Nanoparticles for Cancer Therapy: Surface Chemistry and Biological Implications

Currently, cancer is among the most challenging diseases due to its ability to continuously evolve into a more complex muldimentional system, in addition to its high capability to spread to other organs and tissues. In this context, the relevance of nanobiomaterials (NBMs) for the development of new more effective and less harmful treatments is increasing. NBMs provide the possibility of combining several functionalities on a single system, expectedly in a synergic way, to better perform the treatment and cure. However, the control of properties such as colloidal stability, circulation time, pharmacokinetics, and biodistribution, assuring the concentration in specific target tissues and organs, while keeping all desired properties, tends to be dependent on subtle changes in surface chemistry. Hence, the behavior of such materials in different media/environments is of uttermost relevance and concern since it can compromise their efficiency and safety on application. Given the bright perspectives, many efforts have been focused on the development of nanomaterials fulfilling the requirements for real application. These include robust and reproducible preparation methods to avoid aggregation while preserving the interaction properties. The possible impact of nanomaterials in different forms of diagnosis and therapy has been demonstrated in the past few years, given the perspectives on how revolutionary they can be in medicine and health. Considering the high biocompatibility and suitability, this review is focused on titanium dioxide– and iron oxide–based nanoagents highlighting the current trends and main advancements in the research for cancer therapies. The effects of phenomena, such as aggregation and agglomeration, the formation of the corona layer, and how they can compromise relevant properties of nanomaterials and their potential applicability, are also addressed. In short, this review summarizes the current understanding and perspectives on such smart nanobiomaterials for diagnostics, treatment, and theranostics of diseases.

Interaction between Filler and Polymeric Matrix in Nanocomposites: Magnetic Approach and Applications

In recent years, polymer nanocomposites produced by combining nanofillers and a polymeric matrix are emerging as interesting materials. Polymeric composites have a wide range of applications due to the outstanding and enhanced properties that are obtained thanks to the introduction of nanoparticles. Therefore, understanding the filler-matrix relationship is an important factor in the continued growth of this scientific area and the development of new materials with desired properties and specific applications. Due to their performance in response to a magnetic field magnetic nanocomposites represent an important class of functional nanocomposites. Due to their properties, magnetic nanocomposites have found numerous applications in biomedical applications such as drug delivery, theranostics, etc. This article aims to provide an overview of the filler-polymeric matrix relationship, with a special focus on magnetic nanocomposites and their potential applications in the biomedical field.

Scaling Up the Production of Electrodeposited Nanowires: A Roadmap towards Applications

The use of metallic nanowires is mostly reduced to scientific areas where a small quantity of nanostructures are needed. In order to broaden the applicability of these nanomaterials, it is necessary to establish novel synthesis protocols that provide a larger amount of nanowires than the conventional laboratory fabrication processes at a more competitive cost. In this work, we propose several modifications to the conventional electrochemical synthesis of nanowires in order to increase the production with considerably reduced production time and cost. To that end, we use a soft anodization procedure of recycled aluminum at room temperature to produce the alumina templates, followed by galvanostatic growth of CoFe nanowires. We studied their morphology, composition and magnetic configuration, and found that their properties are very similar to those obtained by conventional methods.