Superior electrochemical performance of layered WTe2 as potassium-ion battery electrode

Rational design of a setaria-like NiTe2/MoS2 semi-coherent heterogeneous interface for enhancing diffusion kinetics in potassium-ion batteries

Constructing unique heterostructures is a highly effective approach for enhancing the K+ storage capability of transition metal selenides. Such structures generate internal electric fields that significantly reduce the charge transfer activation energy. However, achieving a flawless interfacial region that maintains the optimal energy level gradient and degree of lattice matching remains a considerable challenge. In this study, we synthesised Setaria-like NiTe2/MoS2@C heterogeneous interfaces at which three-dimensional MoS2 nanosheets are evenly embedded in NiTe2 nanorods to form stabilised heterojunctions. The NiTe2/MoS2 heterojunctions display distinctive electronic configurations and several active sites owing to their low lattice misfits (δ = 13 %), strong electric fields, and uniform carbon shells. A NiTe2/MoS2@C anode in a potassium-ion battery (KIB) exhibited an impressive reversible capacity of 125.8 mAh/g after 1000 cycles at a rate of 500 mA g-1 and a stable reversible capacity of 111.7 mAh/g even after 3000 cycles at 1000 mA g-1. Even the NiTe2/MoS2@C//perylene tetracarboxylic dianhydride full battery configuration maintained a significant reversible capacity of 92.4 mAh/g after 100 cycles at 200 mA g-1, highlighting its considerable potential for application in KIBs. Calculations further revealed that the well-designed NiTe2/MoS2 heterojunction significantly promotes K+ ion diffusion.

Theoretical study on the effect of torsional deformation on WTe2 as a cathode material for calcium ion batteries

CONTEXT

In this study, the electronic structure and diffusion barrier of the Ca-adsorbed WTe2 system under different torsion angles were calculated based on the first-principles method. The results show that the structure and properties of the pure WTe2 system and Ca-adsorbed WTe2 system are affected by torsional deformation. When the torsion angle is 6°, the intrinsic WTe2 changes from a direct band gap to an indirect band gap. The torsional deformation does not change the metallicity of the Ca-adsorbed WTe2 system. The Ca-d state electrons contribute to the electron density of WTe2. The calculation of the diffusion barrier shows that the torsion deformation promotes the diffusion of calcium on the surface of WTe2. This study provides a theoretical basis for the regulation of electrode materials.

METHODS

In this study, Materials Studio 8.0 software was used to construct the WTe2 model and Ca-adsorbed WTe2 model, and CASTEP module was used for first-principles calculation.

Efficient Polytelluride Anchoring for Ultralong-Life Potassium Storage: Combined Physical Barrier and Chemisorption in Nanogrid-in-Nanofiber

Metal tellurides (MTes) are highly attractive as promising anodes for high-performance potassium-ion batteries. The capacity attenuation of most reported MTe anodes is attributed to their poor electrical conductivity and large volume variation. The evolution mechanisms, dissolution properties, and corresponding manipulation strategies of intermediates (K-polytellurides, K-pTex) are rarely mentioned. Herein, we propose a novel structural engineering strategy to confine ultrafine CoTe2 nanodots in hierarchical nanogrid-in-nanofiber carbon substrates (CoTe2@NC@NSPCNFs) for smooth immobilization of K-pTex and highly reversible conversion of CoTe2 by manipulating the intense electrochemical reaction process. Various in situ/ex situ techniques and density functional theory calculations have been performed to clarify the formation, transformation, and dissolution of K-pTex (K5Te3 and K2Te), as well as verifying the robust physical barrier and the strong chemisorption of K5Te3 and K2Te on S, N co-doped dual-type carbon substrates. Additionally, the hierarchical nanogrid-in-nanofiber nanostructure increases the chemical anchoring sites for K-pTex, provides sufficient volume buffer space, and constructs highly interconnected conductive microcircuits, further propelling the battery reaction to new heights (3500 cycles at 2.0 A g-1). Furthermore, the full cells further demonstrate the potential for practical applications. This work provides new insights into manipulating K-pTex in the design of ultralong-cycling MTe anodes for advanced PIBs.

Boosting cobalt ditelluride quantum-rods anode materials for excellent potassium-ion storage via hierarchical physicochemical encapsulation

The exploration of anode materials that can store large-sized K-ion to solve the poor kinetics and large volume expansion issues has become the key scientific bottlenecks hindering the development of potassium-ion batteries (PIBs). Herein, ultrafine CoTe₂ quantum rods physiochemically encapsulated by graphene and nitrogen-doped carbon (CoTe₂@rGO@NC) are regarded as anode electrodes for PIBs. Dual physicochemical confinement and quantum size effect not only enhance electrochemical kinetics but also restrain large lattice stress during repeated K-ion insertion/extraction process. Superior electronic conductivity, K-ion adsorption, and diffusion ability can be acquired for CoTe₂@rGO@NC, confirmed through first-principles calculations and kinetics study. K-ion insertion/extraction proceeds via a typical conversion mechanism relying on Co as the redox site, where the robust chemical bond of COCo plays an important role in maintaining the electrode stability. Accordingly, CoTe₂@rGO@NC contributes a high initial capacity of 237.6 mAh·g^-1 at 200 mA·g^-1, a long lifetime over 500 cycles with low-capacity decay of 0.10% per cycle. This research will lay the materials science foundation for the construction of quantum-rod electrodes.

Optical and dielectric response of two-dimensional WX2 (X = Cl, O, S, Se, Te) monolayers: A comprehensive study based on density functional theory

Here, we study the dielectric and optical properties of two-dimensional (2D) WX₂ monolayers, where X is Cl, O, S, Se, and Te. First principle electronic band structure calculations reveal that all materials are direct band gap semiconductors except WO₂ and WCl₂ , which are found to be indirect band gap semiconducting 2D materials. The dielectric response of these materials is also systematically investigated. The obtained results suggest that these materials are suitable as dielectric materials to suppress unwanted signal noise. The optical properties of these 2D materials, such as absorption, reflection and extinction coefficients, refractive index, and optical conductivity, are also calculated from the dielectric function. It is found that these materials exhibit excellent optical response. The present electronic, dielectric, and optical findings indicate that WX₂ monolayers have an opportunity in electronic, optical, and optoelectronic device applications.

Filling Selenium into Sulfur Vacancies in Ultrathin Tungsten Sulfide Nanosheets for Superior Potassium Storage

The development of WS₂ as an anode for potassium-ion batteries (PIBs) is severely confined by the low K⁺ storage capacity and poor intrinsic electrical conductivity. Our previous study demonstrated that the creation of sulfur vacancies (V_S) in WS₂ can enhance its K⁺ storage capability. However, it is a big challenge to keep the stability of V_S while reserving the excellent activity. Herein, we design Se-filled WS₂ nanosheets with V_S (V_S-WS₂-Se NS) for PIBs. The Se heteroatom filling into the V_S can not only stabilize and activate them, rendering more active sites to adsorb K⁺, but also further enhance the electrical conductivity. Consequently, the V_S-WS₂-Se NS anode presents significantly promoted storage capacity and reaction kinetics, superior to the pristine WS₂ and WS₂ with only V_S. Remarkably, the V_S-WS₂-Se NS anode exhibits the highest specific capacity of 363.9 mA h g^-1 at 0.05 A g^-1. Simultaneously, a high reversible capacity of 144.2 mA h g^-1 after 100 cycles at 2.0 A g^-1 is shown. Ex situ analyses demonstrated that the potassium storage mechanism involves the intercalation and conversion reaction between WS₂ and K⁺. Moreover, DFT calculations revealed that the Se filling into V_S can further enhance the electrical conductivity and reduce the K-insertion energy barriers of WS₂ and thus account for the outstanding electrochemical performance. This study demonstrates that engineering the vacancies by the heteroatom filling strategy offers a novel and feasible route for designing high-performance electrode materials in various energy-storage systems.

Recent progress in nanomaterial-based bioelectronic devices for biocomputing system

Bioelectronic devices have received the massive attention because of their huge potential to develop the core electronic components for biocomputing system. Up to now, numerous bioelectronic devices have been reported such as biomemory and biologic gate by employment of biomolecules including metalloproteins and nucleic acids. However, the intrinsic limitations of biomolecules such as instability and low signal production hinder the development of novel bioelectronic devices capable of performing various novel computing functions. As a way to overcome these limitations, nanomaterials have the great potential and wide applicability to grant and extend the electronic functions, and improve the inherent properties from biomolecules. Accordingly, lots of nanomaterials including the conductive metal, graphene, and transition metal dichalcogenide nanomaterials are being used to develop the remarkable functional bioelectronic devices like the multi-bit biomemory and resistive random-access biomemory. This review discusses the nanomaterial-based superb bioelectronic devices including the biomemory, biologic gates, and bioprocessors. In conclusion, this review will provide the interdisciplinary information about utilization of various novel nanomaterials applicable for biocomputing system.

Weyl semimetal orthorhombic Td-WTe2as an electrode material for sodium- and potassium-ion batteries

Alkali metals such as sodium and potassium have become promising candidates for the next generation of monovalent-ion batteries. However, a challenge for these battery technologies lies in the development of electrode materials that deliver high capacity and stable performance even at high cycling currents. Here we study orthorhombic tungsten ditelluride or Td-WTe₂as an electrode material for sodium- (SIB) and potassium-ion batteries (KIB) in propylene carbonate (PC) based electrolyte. Results show that despite larger Shannon's radius of potassium-ions and their sluggish diffusion in Td-WTe₂due to higher overpotential, at 100 mA.g^-1KIB-half cells showed higher cycling stability and low capacity decay of 4% versus 16% compared to SIB-half cells. Likewise, in a rate capability test at 61^stcycle (at 50 mA.g^-1), the KIB-half cells yielded charge capacity of 172 mAh.g^-1versus 137 mAh.g^-1of SIB-half cells. The superior electrochemical performance of Td-WTe₂electrode material in KIB-half cells is explained based on the concept of Stokes' radius-smaller desolvation activation energy resulted in higher mobility of potassium-ions in PC-based electrolyte. In addition, the likely mechanisms of electrochemical insertion and extraction of Na- and K-ions in Td-WTe₂are also discussed.

Expanded MoSe2 Nanosheets Vertically Bonded on Reduced Graphene Oxide for Sodium and Potassium-Ion Storage

The cost-efficient and plentiful Na and K resources motivate the research on ideal electrodes for sodium-ion batteries (SIBs) and potassium-ion batteries (PIBs). Here, MoSe₂ nanosheets perpendicularly anchored on reduced graphene oxide (rGO) are studied as an electrode for SIBs and PIBs. Not only does the graphene network serves as a nucleation substrate for suppressing the agglomeration of MoSe₂ nanosheets to eliminate the electrode fracture but also facilitates the electrochemical kinetics process and provides a buffer zone to tolerate the large strain. An expanded interplanar spacing of 7.9 Å is conducive to fast alkaline ion diffusion, and the formed chemical bondings (C-Mo and C-O-Mo) promote the structure integrity and the charge transfer kinetics. Consequently, MoSe₂@5%rGO exhibits a reversible specific capacity of 458.3 mAh·g^-1 at 100 mA·g^-1, great cyclability with a retention of 383.6 mAh·g^-1 over 50 cycles, and excellent rate capability (251.3 mAh·g^-1 at 5 A·g^-1) for SIBs. For PIBs, a high first specific capacity of 365.5 mAh·g^-1 at 100 mA·g^-1 with a low capacity fading of 51.5 mAh·g^-1 upon 50 cycles and satisfactory rate property are acquired for MoSe₂@10%rGO composite. Ex situ measurements validate that the discharge products are Na₂Se for SIBs and K₅Se₃ for PIBs, and robust chemical bonds boost the structure stability for Na- and K-ion storage. The full batteries are successfully fabricated to verify the practical feasibility of MoSe₂@5%rGO composite.