Mixed-dimensional Te/CdS van der Waals heterojunction for self-powered broadband photodetector

Electrically Tunable Multiple-Effects Synergistic and Boosted Photoelectric Performance in Te/WSe2 Mixed-Dimensional Heterojunction Phototransistors

Mix-dimensional heterojunctions (MDHJs) photodetectors (PDs) built from bulk and 2D materials are the research focus to develop hetero-integrated and multifunctional optoelectronic sensor systems. However, it is still an open issue for achieving multiple effects synergistic characteristics to boost sensitivity and enrich the prospect in artificial bionic systems. Herein, electrically tunable Te/WSe2 MDHJs phototransistors are constructed, and an ultralow dark current below 0.1 pA and a large on/off rectification ratio of 106 is achieved. Photoconductive, photovoltaic, and photo-thermoelectric conversions are simultaneously demonstrated by tuning the gate and bias. By these synergistic effects, responsivity and detectivity respectively reach 13.9 A W-1 and 1.37 × 1012 Jones with 400 times increment. The Te/WSe2 MDHJs PDs can function as artificial bionic visual systems due to the comparable response time to those of the human visual system and the presence of transient positive and negative response signals. This work offers an available strategy for intelligent optoelectronic devices with hetero-integration and multifunctions.

Dual-Junction Field-Effect Transistor with Ultralow Subthreshold Swing Approaching the Theoretical Limit

Metal-oxide-semiconductor field-effect transistors as basic electronic devices of integrated circuits have been greatly developed and widely used in the past decades. However, as the thickness of the conducting channel decreases, the interface electronic scattering between the gate oxide layer and the channel significantly impacts the performance of the transistor. To address this issue, van der Waals heterojunction field-effect transistors (vdWJFETs) have been proposed using two-dimensional semiconductors, which utilize the built-in electric field at the sharp van der Waals interface to regulate the channel conductance without the need of a complex gate oxide layer. In this study, a novel dual-junction vdWJFET composed of a MoS2 channel and a Te nanosheet gate has been developed. This device achieves an ultralow subthreshold swing (SS) and an extremely low current hysteresis, greatly surpassing the single-junction vdWJFET. In the transistor, the SS decreases from 475.04 to 68.3 mV dec-1, nearly approaching the theoretical limit of 60 mV dec-1 at room temperature. The pinch-off voltage (Vp) decreases from -4.5 to -0.75 V, with a current hysteresis of ∼10 mV and a considerable field-effect mobility (μ) of 36.43 cm2 V-1 s-1. The novel dual-junction vdWJFET provides a new approach to realize a transistor with a theoretical ideal SS and a negligible current hysteresis toward low-power electronic applications.

Luminescence of carbon quantum dots and their application in biochemistry

Similar to fullerenes, carbon nanotubes and graphene, carbon dots (CDs) are causing a lot of research work in their own right. CDs are a type of surface-passivated quantum dot that contain carbon atoms. Their distinctive characteristics, such as luminescent emission that varies with size and wavelength, resistance to photobleaching, easy biological binding, lack of toxicity, and economical production without the need for intricate synthetic processes, have led to a noteworthy surge in attention within the research community. Different techniques can be utilized to create these CDs, spanning from basic candle burning to laser ablation. This review article delves into the principles of fluorescence technology, providing insights into how different synthesis methods of quantum dots impact their luminescent properties. Additionally, it highlights the latest applications of quantum dots in catalysis and biomedical fields, with special emphasis on the current status of luminescent properties in biology and chemistry. Towards the end, the article discusses the limitations of quantum dots in current practical applications, pointing out that CDs hold promising potential for future applications.

Bi2O2Se Nanowire/MoSe2 Mixed-Dimensional Polarization-Sensitive Photodiode with a Nanoscale Ultrafast-Response Channel

In recent years, polarization-sensitive photodiodes based on one-dimensional/two-dimensional (1D/2D) van der Waals (vdWs) heterostructures have garnered significant attention due to the high specific surface area, strong orientation degree of 1D structures, and large photo-active area and mechanical flexibility of 2D structures. Therefore, they are applicable in wearable electronics, electrical-driven lasers, image sensing, optical communication, optical switches, etc. Herein, 1D Bi₂O₂Se nanowires have been successfully synthesized via chemical vapor deposition. Impressively, the strongest Raman vibration modes can be achieved along the short edge (y-axis) of Bi₂O₂Se nanowires with high crystalline quality, which originate from Se and Bi vacancies. Moreover, the Bi₂O₂Se/MoSe₂ photodiode designed with type-II band alignment demonstrates a high rectification ratio of 10³. Intuitively, the photocurrent peaks are mainly distributed in the overlapped region under the self-powered mode and reverse bias, within the wavelength range of 400-nm. The resulting device exhibits excellent optoelectrical performances, including high responsivities (R) and fast response speed of 656 mA/W and 350/380 μs (zero bias) and 17.17 A/W and 100/110 μs (-1 V) under 635 nm illumination, surpassing the majority of reported mixed-dimensional photodiodes. The most significant feature of our photodiode is its highest photocurrent anisotropic ratio of ∼2.2 (-0.8 V) along the long side (x-axis) of Bi₂O₂Se nanowires under 635 nm illumination. The above results reveal a robust and distinctive correlation between structural defects and polarized orientation for 1D Bi₂O₂Se nanowires. Furthermore, 1D Bi₂O₂Se nanowires appear to be a great potential candidate for high-performance rectifiers, polarization-sensitive photodiodes, and phototransistors based on mixed vdWs heterostructures.

Synergistic Effect of Hybrid CdSe Nanobelt/PbI2 Flake Heterojunction Toward Drastic Performance Flexible Photodetectors

Despite numerous studies on broadband photodetectors, the problematic query that remains unaddressed is the limited photoresponsivity while broadening the spectral regime. Here, for the first time, a rational design of a hybrid 1D CdSe nanobelt/2D PbI₂ flake heterojunction device is constructed, which substantially boosts the photocurrent while significantly attenuating the dark current, resulting in improved photodetector figures-of-merit. Thanks to the excellent quality of the nanobelt/flake and built-in electric field at the CdSe/PbI₂ interface heterojunction, photogenerated carriers are promptly segregated and more photoexcitons are accumulated by the respective electrodes, enabling a high responsivity of ∼10⁶ A/W, making this one of the highest values among similar reported hybrid heterojunction photodetectors, together with a large linear dynamic range, superior sensitivity, excellent detectivity and external quantum efficiency, an ultrafast response, and a broadband spectral response range. The similar 1D/2D hybrid heterojunction device architecture assembled on the flexible polyimide tape substrate exhibits excellent folding endurance and mechanical, flexural, and long-term environmental stability. The present device architecture and robust operational stability in an ambient environment reveals that the combination of the present 1D/2D hybrid heterojunction has incredible potential for future flexible photoelectronic devices.

Polarity-Reversible Te/WSe2 van der Waals Heterodiode for a Logic Rectifier and Polarized Short-Wave Infrared Photodetector

As a p-type elemental material with high carrier mobility, superior ambient stability, and anisotropic crystal structure, emerging two-dimensional (2D) tellurium (Te) has been considered a successor to black phosphorus for developing infrared-related optoelectronics. Nevertheless, the lack of a scalable thickness engineering strategy remains an obstacle to unleashing its full potential. Te-based electronics with logic functions are also less explored. Herein, we propose a novel wet-chemical thinning method for 2D Te, with the merits of scalability and site-specific thickness patterning capability. A polarity-switchable van der Waals (vdW) heterodiode with a high rectification ratio of 2.4 × 10³ is realized on the basis of Te/WSe₂. The electronic application of this unique characteristic is demonstrated by fabricating a logic half-wave rectifier, in which the rectifying states are switchable via electrostatic gating control. Besides, the narrow band gap of Te endows the device with a broad spectral response from visible to short-wave infrared. The room-temperature responsivity reaches 5.2 A W^-1 at the telecom wavelength of 1.55 μm, with an external quantum efficiency of 420% and detectivity of 6.8 × 10⁹ Jones. In particular, owing to the intrinsic in-plane anisotropy of Te, the device exhibits a favorable photocurrent anisotropic ratio of ∼3. Our study demonstrates the enormous potential of Te for novel electronics, promoting the development of elemental 2D materials.

Zero Bias Operation: Photodetection Behaviors Obtained by Emerging Materials and Device Structures

Zero-biased photodetectors have desirable characteristics for potentially next-generation devices, including high efficiency, rapid response, and low power operation. In particular, the detector efficiency can be improved simply by changing the electrode contact geometry or morphological structure of materials, which give unique properties such as energy band bending, photo absorbance and electric field distribution. In addition, several combinations of materials enable or disable the operation of selective wavelengths of light detection. Herein, such recent progresses in photodetector operating at zero-bias voltage are reviewed. Considering the advantages and promises of these low-power photodetectors, this review introduces various zero-bias implementations and reviews the key points.

Solution-processed thickness engineering of tellurene for field-effect transistors and polarized infrared photodetectors

Research on elemental 2D materials has been experiencing a renaissance in the past few years. Of particular interest is tellurium (Te), which possesses many exceptional properties for nanoelectronics, photonics, and beyond. Nevertheless, the lack of a scalable approach for the thickness engineering and the local properties modulation remains a major obstacle to unleashing its full device potential. Herein, a solution-processed oxidative etching strategy for post-growth thickness engineering is proposed by leveraging the moderate chemical reactivity of Te. Large-area ultrathin nanosheets with well-preserved morphologies could be readily obtained with appropriate oxidizing agents, such as HNO₂, H₂O₂, and KMnO₄. Compared with the conventional physical thinning approaches, this method exhibits critical merits of high efficiency, easy scalability, and the capability of site-specific thickness patterning. The thickness reduction leads to substantially improved gate tunability of field-effect transistors with an enhanced current switching ratio of ∼10³, promoting the applications of Te in future logic electronics. The response spectrum of Te phototransistors covers the full range of short-wave infrared wavelength (1–3 μm), and the room-temperature responsivity and detectivity reach 0.96 AW^-1 and 2.2 × 10⁹ Jones at the telecom wavelength of 1.55 μm, together with a favorable photocurrent anisotropic ratio of ∼2.9. Our study offers a new approach to tackling the thickness engineering issue for solution-grown Te, which could help realize the full device potential of this emerging p-type 2D material.

High-Performance and Broadband Flexible Photodetectors Employing Multicomponent Alloyed 1D CdSxSe1-x Micro-Nanostructures

Low-cost multicomponent alloyed one-dimensional (1D) semiconductors exhibit broadband absorption from the ultraviolet to the near-infrared regime, which has attracted a great deal of interest in high-performance flexible optoelectronic devices. Here, we report the facile one-step fabrication of high-performance broadband rigid and flexible photodevices based on multicomponent alloyed 1D cadmium-sulfur-selenide (CdS_xSe_1-x) micro-nanostructures obtained via a vapor transport route. Photoresponse measurements have demonstrated their superior spectral photoresponsivity (5.8 × 10⁴ A/W), several orders of magnitude higher than the pristine CdSe nanobelt photodevice, high specific detectivity (2 × 10¹⁵ Jones), photogain (1.2 × 10⁵), external quantum efficiency (EQE, 1.4 × 10⁷%), rapid response speed (13 ms), and excellent long-term environmental stability. The multicomponent alloyed CdS_xSe_1-x nanobelt photodevice demonstrated about three times higher photocurrent as well as can operate under multiple color illuminations (200-800 nm) and at a high applied bias of 10 V with the photoresponsivity and EQE being boosted to 4.34 × 10⁵ A/W and 8.96 × 10⁷%, respectively. Furthermore, multicomponent alloyed CdS_xSe_1-x nanobelt flexible photodevices show excellent mechanical and flexural photostabilities with identical photoresponse as rigid nanodevices. The improvement mechanism found in the present research can be exploited to lead to the design of high-performance flexible photodevices comprising other multicomponent nanomaterials.