Fabrication and modeling of recessed traces for silicon-based neural microelectrodes

Short-Term Effects of Gamma Stimulation on Neuroinflammation at the Tissue-Electrode Interface in Motor Cortex

OBJECTIVES

The reliability of long-term neural recordings as therapeutic interventions for motor and sensory disorders is hampered by the brain tissue response. Previous work showed that flickering light at gamma frequencies (ie, 20-50 Hz) causes enhanced microglial recruitment in the visual cortex. The effects of gamma stimulation on glial cells surrounding implanted neural electrodes are not well understood. We hypothesized that invasive stimulation in the gamma frequency band increases microglial recruitment in the short term and reduces astrogliosis at the tissue-electrode interface.

MATERIALS AND METHODS

Male Long Evans rats were implanted with dual-shank silicon microelectrode arrays into the motor cortex. After implantation, rats received one hour of 40-Hz stimulation at a constant current of 10 μA using charge-balanced, biphasic pulses on one shank, and the other shank served as the nonstimulated control. Postmortem, tissue sections were stained with ectodermal dysplasia 1 (ED1) for activated microglia, glial fibrillary acidic protein (GFAP) for astrocytes, and 4',6-diamidino-2-phenylindole (DAPI) for nonspecific nuclei. Fluorescent intensity and cell number as a function of distance from the tissue-electrode interface were used to quantify all stained sections.

RESULTS

Fluorescent intensity for ED1 was nearly 40% lower for control than for stimulated sites (0-500 μm away from the implant), indicating increased microglial recruitment to the stimulated site (p < 0.05). Fluorescent intensity for GFAP was >67% higher for control than for stimulated sites (0-500 μm away from the implant), indicating reduced astrogliosis at the stimulated site (p < 0.05). No differences were observed in DAPI-stained sections between conditions.

CONCLUSIONS

These results suggest that short-term gamma stimulation modulates glial recruitment in the immediate vicinity of the microelectrode. Future studies will investigate the long-term effects of gamma stimulation on glial recruitment at the tissue-electrode interface as a strategy to improve long-term recording reliability.

Charge Injection Enhancement Comparisons of Iridium Oxide Microelectrodes In Vitro and In Vivo Using a Portable Neurostimulator

Microelectrodes are desired to deliver more charges to neural tissues while under electrochemical safety limits. Applying anodic bias potential during neurostimulation is a known technique for charge enhancement. Here, we investigated the levels of charge enhancement with anodic bias potential in vitro and in vivo using a custom-designed portable neurostimulator. We immersed our custom microelectrode probe in saline and measured voltage transients in response to constant current stimulation with and without a 500 mV anodic bias potential. We then inserted the same microelectrode probe into the primary motor cortex of the rat brain and measured voltage transients with the same electronics. Results showed that the charge injection capacity of the activated iridium oxide microelectrode site (with 2000 μm2 geometric surface areas (GSAs)) increased by the use of the anodic bias potentials in both in vitro and in vivo: from 10 nC/phase to 32 nC/phase for 200 μs pulse widths, and from 2 nC/phase to 8 nC/phase, respectively. Thus, the order of charge injection capacities of the four cases tested in this study is as follows (from the lowest to the highest): in vivo without anodic bias, in vivo with anodic bias, in vitro without anodic bias, and in vitro with anodic bias. This work also validated in vivo use of our new portable neurostimulator which received stimulation waveforms wirelessly.

A Simple Table-Top Technique for Multi-Signal Pseudo-Extracellular Recording

Validation of neural probe performance often includes implantation in live animals, to assess ability to detect and distinguish signals generated by individual neurons. While this method is informative, an effective in vitro alternative would streamline device development and improve ethical considerations by reducing the use of animals in the validation of neural recording devices. Here, we describe a simple system using ball electrodes to apply multiple neural waveforms to phosphate buffered saline, which are simultaneously recorded by a microelectrode probe. Using this technique, our neural probe was able to detect and distinguish spikes from multiple units of roughly physiological amplitudes (~100 microvolts peak to peak), indicating promise as an in vitro alternative to animal testing for initial validation of neural recording devices.

A Diagnostic Circuit for Crosstalk Detection in Microelectrode Arrays

Current leakage between channels in microelectrode arrays is a sign of device failure and can lead to shorting of neural signals. The purpose of this project is to detect crosstalk between 32 channels of electrodes. We designed an embedded crosstalk detection system that can stimulate each electrode individually with a constant-current pulse and record voltage transients of the stimulated and adjacent electrodes to generate a matrix of crosstalk values. Charge injection in a phosphate buffered saline solution was used to check the condition of each electrode. A semi-wet condition was then used to determine the percent crosstalk between the channels. The analysis showed that there was minimal crosstalk between the electrodes, except for a known physical defect on the probe. The measurement technique enabled by the electronics circuit has the potential to be used in functional testing and screening of implantable devices.

Unprotected sidewalls of implantable silicon-based neural probes and conformal coating as a solution

Silicon-based implantable neural devices have great translational potential as a means to deliver various treatments for neurological disorders. However, they are currently held back by uncertain longevity following chronic exposure to body fluids. Conventional deposition techniques cover only the horizontal surfaces which contain active electronics, electrode sites, and conducting traces. As a result, a vast majority of today's silicon devices leave their vertical sidewalls exposed without protection. In this work, we investigated two batch-process silicon dioxide deposition methods separately and in combination: atomic layer deposition and inductively-coupled plasma chemical vapor deposition. We then utilized a rapid soak test involving potassium hydroxide to evaluate the coverage quality of each protection strategy. Focused ion beam cross sectioning, scanning electron microscopy, and 3D extrapolation enabled us to characterize and quantify the effectiveness of the deposition methods. Results showed that bare silicon sidewalls suffered the most dissolution whereas ALD silicon dioxide provided the best protection, demonstrating its effectiveness as a promising batch process technique to mitigate silicon sidewall corrosion in chronic applications.