Early adhesive behavior of bone-marrow-derived mesenchymal stem cells on collagen electrospun fibers

Architecture of a dual biocompatible platform to immobilize genistin: fabrication with physio-chemical and in vitro evaluation

The design of biocompatible cell culture substrates and electrospun nanofibers can improve cell proliferation and behavior in laboratory conditions for tissue engineering applications in medicine. In this research, genistin was obtained by extracting from soybean meal powder, and then by adding polycaprolactone (PCL), genistin nanocapsules were prepared. For the first time, we used a lipophilic nanophase (encapsulated genistin) coated in a hydrophilic nanophase (gelatin /polyvinyl alcohol) as a dual nanosystem by the electrospinning method. In the approach, the nanofibers mimic the natural extracellular matrix, interact favorably with cells being cultured from one side, and raise the local concentration of a bioactive compound at the cell surface. The encapsulated drug which was inserted in fibers with a loading percentage of 92.01% showed appropriate and significant controlled release using high-performance liquid chromatography (HPLC). To prove the experiments, analysis using an ultraviolet-visible spectrometer (UV-Vis), 1H NMR spectrometer, Fourier transforms infrared spectrometer (FTIR), mechanical test, scanning electron microscope (SEM) and microscope transmission electron microscopy (TEM) was performed. The sample synthesized with 40% drug using the MTT method exhibited remarkable biological effects, viability, and non-toxicity. Additionally, significant proliferation and adhesion on the mouse fibroblast cell line L929 were observed within a 72-h timeframe.

Spatiotemporal Immunomodulation and Biphasic Osteo-Vascular Aligned Electrospun Membrane for Diabetic Periosteum Regeneration

Under diabetic conditions, blood glucose fluctuations and exacerbated immunopathological inflammatory environments pose significant challenges to periosteal regenerative repair strategies. Responsive immune regulation in damaged tissues is critical for the immune microenvironment, osteogenesis, and angiogenesis stabilization. Considering the high-glucose microenvironment of such acute injury sites, a functional glucose-responsive immunomodulation-assisted periosteal regeneration composite material-PLA（Polylactic Acid）/COLI(Collagen I）/Lipo(Liposome）-APY29 (PCLA)-is constructed. Aside from stimulating osteogenic differentiation, owing to the presence of surface self-assembled type I collagen in the scaffolds, PCLA can directly respond to focal area high-glucose microenvironments. The PCLA scaffolds trigger the release of APY29-loaded liposomes, shifting the macrophages toward the M2 phenotype, inhibiting the release of inflammatory cytokines, improving the bone immune microenvironment, and promoting osteogenic differentiation and angiogenesis. Bioinformatics analyses show that PCLA enhances bone repair by inhibiting the inflammatory signal pathway regulating the polarization direction and promoting osteogenic and angiogenic gene expression. In the calvarial periosteal defect model of diabetic rats, PCLA scaffolds induce M2 macrophage polarization and improve the inflammatory microenvironment, significantly accelerating periosteal repair. Overall, the PCLA scaffold material regulates immunity in fluctuating high-glucose inflammatory microenvironments, achieves relatively stable and favorable osteogenic microenvironments, and facilitates the effective design of functionalized biomaterials for bone regeneration therapy in patients with diabetes.

Comparative adhesive and migratory properties of mesenchymal stem cells from different tissues

BACKGROUND

Mesenchymal stem cells (MSC) are used in therapy, often by injection into the blood.

OBJECTIVE

We aimed to compare the adhesive and migratory properties of MSC from umbilical cords (UCMSC), bone marrow (BMMSC) or trabecular bone (TBMSC), which might influence delivery to injured tissue.

METHODS

MSC were perfused through glass capillaries coated with matrix proteins, collagen or fibronectin, or albumin. Adherent cells were counted microscopically and their spreading analysed over time. MSC migration through 8 μm pore filters coated with the same proteins was analysed.

RESULTS

The number of MSC adhering to collagen was greater than fibronectin, decreased as wall shear rate increased from 17 to 70 s-1, and was in the order UCMSC>BMMSC>TBMSC. Conversely, spreading was more effective on fibronectin and was in the order BMMSC>TBMSC≥UCMSC. Migration was promoted by coating the lower surface of filters with either matrix protein, with UCMSC migrating more efficiently than BMMSC.

CONCLUSIONS

MSC show origin-dependent variations in their efficiency of capture from flow and subsequent spreading or ability to migrate on matrix proteins. UCMSC showed most efficient capture from flow, which was followed by less spreading, but more rapid migration. These responses might be associated with more effective delivery from the circulation into damaged tissue.

Electrochemically Preadsorbed Collagen Promotes Adult Human Mesenchymal Stem Cell Adhesion

The present article reports on the effect of electric potential on the adsorption of collagen type I (the most abundant component of the organic phase of bone) onto optically transparent carbon electrodes (OTCE) and its mediation on subsequent adhesion of adult, human, mesenchymal stem cells (hMSCs). For this purpose, adsorption of collagen type I was investigated as a function of the protein concentration (0.01, 0.1, and 0.25 mg/mL) and applied potential (open circuit potential [OCP; control], +400, +800, and +1500 mV). The resulting substrate surfaces were characterized using spectroscopic ellipsometry, atomic force microscopy, and cyclic voltammetry. Adsorption of collagen type I onto OTCE was affected by the potential applied to the sorbent surface and the concentration of protein. The higher the applied potential and protein concentration, the higher the adsorbed amount (Γcollagen). It was also observed that the application of potential values higher than +800 mV resulted in the oxidation of the adsorbed protein. Subsequent adhesion of hMSCs on the OTCEs (precoated with the collagen type I films) under standard cell culture conditions for 2 h was affected by the extent of collagen preadsorbed onto the OTCE substrates. Specifically, enhanced hMSCs adhesion was observed when the Γcollagen was the highest. When the collagen type I was oxidized (under applied potential equal to +1500 mV), however, hMSCs adhesion was decreased. These results provide the first correlation between the effects of electric potential on protein adsorption and subsequent modulation of anchorage-dependent cell adhesion.

Nanoparticle-based bioactive agent release systems for bone and cartilage tissue engineering

The inability to deliver bioactive agents locally in a transient but sustained manner is one of the challenges on the development of bio-functionalized scaffolds for tissue engineering (TE) and regenerative medicine. The mode of release is especially relevant when the bioactive agent is a growth factor (GF), because the dose and the spatiotemporal release of such agents at the site of injury are crucial to achieve a successful outcome. Strategies that combine scaffolds and drug delivery systems have the potential to provide more effective tissue regeneration relative to current therapies. Nanoparticles (NPs) can protect the bioactive agents, control its profile, decrease the occurrence and severity of side effects and deliver the bioactive agent to the target cells maximizing its effect. Scaffolds containing NPs loaded with bioactive agents can be used for their local delivery, enabling site-specific pharmacological effects such as the induction of cell proliferation and differentiation, and, consequently, neo-tissue formation. This review aims to describe the concept of combining NPs with scaffolds, and the current efforts aiming to develop highly multi-functional bioactive agent release systems, with the emphasis on their application in TE of connective tissues.

Electrospun nanofibrous SF/P(LLA-CL) membrane: a potential substratum for endothelial keratoplasty

Background

Cornea transplant technology has progressed markedly in recent decades, allowing surgeons to replace diseased corneal endothelium by a thin lamellar structure. A thin, transparent, biocompatible, tissue-engineered substratum with corneal endothelial cells for endothelial keratoplasty is currently of interest. Electrospinning a nanofibrous structure can simulate the extracellular matrix and have beneficial effects for cell culture. Silk fibroin (SF) has good biocompatibility but poor mechanical properties, while poly(l-lactic acid-co-ε-caprolactone) (P(LLA-CL)) has good mechanical properties but poor biocompatibility. Blending SF with P(LLA-CL) can maintain the advantages of both these materials and overcome their disadvantages. Blended electrospun nanofibrous membranes may be suitable for regeneration of the corneal endothelium. The aim of this study was to produce a tissue-engineered construct suitable for endothelial keratoplasty.

Methods

Five scaffolds containing different SF:P(LLA-CL) blended ratios (100:0, 75:25, 50:50, 25:75, 0:100) were manufactured. A human corneal endothelial (B4G12) cell line was cultured on the membranes. Light transmission, speed of cell adherence, cell viability (live-dead test), cell proliferation (Ki-67, BrdU staining), and cell monolayer formation were detected on membranes with the different blended ratios, and expression of some functional genes was also detected by real-time polymerase chain reaction.

Results

Different blended ratios of scaffolds had different light transmittance properties. The 25:75 blended ratio membrane had the best transmittance among these scaffolds. All electrospun nanofibrous membranes showed improved speed of cell adherence when compared with the control group, especially when the P(LLA-CL) ratio increased. The 25:75 blended ratio membranes also had the highest cell proliferation. B4G12 cells could form a monolayer on all scaffolds, and most functional genes were also stably expressed on all scaffolds. Only two genes showed changes in expression.

Conclusion

All blended ratios of SF:P(LLA-CL) scaffolds were evaluated and showed good biocompatibility for cell adherence and monolayer formation. Among them, the 25:75 blended ratio SF:P(LLA-CL) scaffold had the best transmittance and the highest cell proliferation. These attributes further the potential application of the SF:P(LLA-CL) scaffold for corneal endothelial transplantation.

The role of substrate topography on the cellular uptake of nanoparticles

Improving targeting efficacy has been a central focus of the studies on nanoparticle (NP)-based drug delivery nanocarriers over the past decades. As cells actively sense and respond to the local physical environments, not only the NP design (e.g., size, shape, ligand density, etc.) but also the cell mechanics (e.g., stiffness, spreading, expressed receptors, etc.) affect the cellular uptake efficiency. While much work has been done to elucidate the roles of NP design for cells seeded on a flat tissue culture surface, how the local physical environments of cells mediate uptake of NPs remains unexplored, despite the widely known effect of local physical environments on cellular responses in vitro and disease states in vivo. Here, we report the active responses of human osteosarcoma cells to fibrous substrate topographies and the subsequent changes in the cellular uptake of NPs. Our experiments demonstrate that surface topography modulates cellular uptake efficacy by mediating cell spreading and membrane mechanics. The findings provide a concrete example of the regulative role of the physical environments of cells on cellular uptake of NPs, therefore advancing the rational design of NPs for enhanced drug delivery in targeted cancer therapy.

Biomimetic nanocomposites to control osteogenic differentiation of human mesenchymal stem cells

The design of biomimetic nanomaterials that can directly influence the behavior of cells and facilitate the regeneration of tissues and organs has become an active area of research. Here, the production of materials based on nano-hydroxyapatite composites in scaffolds with nanofibrous and nanoporous topographies, designed to mimic the native bone matrix for applications in bone tissue engineering, is reported. Human mesenchymal stem cells grown on these nanocomposites are stimulated to rapidly produce bone minerals in situ, even in the absence of osteogenic supplements in the cell-culture medium. Nanocomposites comprising type I collagen and nano-hydroxyapatite are found to be especially efficient at inducing mineralization. When subcutaneously implanted into nude mice, this biomimetic nanocomposite is able to form a new bone matrix within only two weeks. Furthermore, when the nanocomposite is enriched with human mesenchymal stem cells before implantation, development of the bone matrix is accelerated to within one week. To the best of the authors' knowledge, this study provides the first clear in vitro and in vivo demonstration of osteoinduction controlled by the material characteristics of a biomimetic nanocomposite. This approach can potentially facilitate the translation of de novo bone-formation technologies to the clinic.

Cartilage repair: 2013 Asian update

Despite financial and regulatory hurdles, Asian scientists and clinicians have made important contributions in the area of cartilage repair. Because it is impossible to include observations on all the published articles in one review, our attempt is to highlight Asian progress in this area during recent years (2005 to the present), reviewing research development and clinical studies. In the former, our discussion of in vitro studies focuses on (1) potential sources of stem cells--such as mesenchymal stem cells (MSCs) from marrow, cord blood, synovium, and mobilized peripheral blood--which are capable of enhancing cartilage repair and (2) the use of growth factors and scaffolds with and without cells. Our discussion of animal studies attempts to summarize activities in evaluating surgical procedures and determining the route of cell administration, as well as studies on matrices and scaffolds. It ranges from the use of small animals such as rats and rabbits to larger animals like pigs and dogs. The local adherent technique, enhancement of microfracture with poly(l-lactic-co-glycolic acid) scaffold, adenovirus-mediated bone morphogenic protein (BMP) genes, and MSCs--whether they are magnetically labeled, suspended in hyaluronic acid, or immobilized with transforming growth factor-β (TGF-β)--have all been able to engineer a repair of the osteochondral defect. Although published Asian reports of clinical studies on cartilage repair are few, the findings of relevant trials are summarized in our discussion of these investigations. There has been a long history of use of laboratory-derived MSCs for cartilage repair. Recent progress has suggested the potential utility of cord blood and mobilized peripheral blood in this area, as well as more injectable bone marrow (BM)-derived stem cells. Finally, we make a few suggestions on the direction of research and development activities and the need for collaborative approaches by regulatory agencies.

Nanofiber for cardiovascular tissue engineering

INTRODUCTION

Organ/tissue replacement therapy is inherently difficult for application in the tissue engineering field due to immune rejection that limits the long-term efficacy of implanted devices. As the application of tissue engineering in the biomedical field has steadily expanded, stem cells have emerged as a viable option to promote the immune acceptance of implantable devices and to expedite alleviation of the pathological conditions. With various novel scaffolds being introduced, nanofibers which have a three-dimensional architecture can be considered as an efficient carrier for stem cells.

AREAS COVERED

This article reviews the novel tissue engineering processes involved with nanofiber and stem cells. Topics such as the fabrication of nanofiber via electrospinning techniques, the interaction between nanofiber scaffold and specific cell and advanced techniques to enhance the stability of stem cells are delineated in detail. In addition, cardiovascular applications of nanofiber scaffolds loaded with stem cells are examined from a clinical perspective.

EXPERT OPINION

Electrospun nanofibers have been intensively explored as a tool for the architecture control of cardiovascular tissue engineering due to their tunable physicochemical properties. The modification of nanofiber with biological cues, which provide rapid differentiation of stem cells into a specific lineage and protect stem cells under the harsh conditions (i.e., hypoxia), will significantly enhance therapeutic efficacies of transplanted cells. A combination of nanofiber carriers and stem cell therapy for tissue regeneration seems to pose enormous potential for the treatment of cardiac diseases including atherosclerosis and myocardial infarction.

Addition of nanoscaled bioinspired surface features: A revolution for bone related implants and scaffolds?

Our expanding ability to handle the "literally invisible" building blocks of our world has started to provoke a seismic shift on the technology, environment and health sectors of our society. During the last two decades, it has become increasingly evident that the "nano-sized" subunits composing many materials—living, natural and synthetic—are becoming more and more accessible for predefined manipulations at the nanosize scale. The use of equally nanoscale sized or functionalised tools may, therefore, grant us unprecedented prospects to achieve many therapeutic aims. In the past decade it became clear that nano-scale surface topography significantly influences cell behaviour and may, potentially, be utilised as a powerful tool to enhance the bioactivity and/ or integration of implanted devices. In this review, we briefly outline the state of the art and some of the current approaches and concepts for the future utilisation of nanotechnology to create biomimetic implantable medical devices and scaffolds for in vivo and in vitro tissue engineering,with a focus on bone. Based on current knowledge it must be concluded that not the materials and surfaces themselves but the systematic biological evaluation of these new material concepts represent the bottleneck for new biomedical product development based on nanotechnological principles.

Nanospiderwebs: artificial 3D extracellular matrix from nanofibers by novel clinical grade electrospinning for stem cell delivery

Novel clinical grade electrospinning methods could provide three-dimensional (3D) nanostructured biomaterials comprising of synthetic or natural biopolymer nanofibers. Such advanced materials could potentially mimic the natural extracellular matrix (ECM) accurately and may provide superior niche-like spaces on the subcellular scale for optimal stem-cell attachment and individual cell homing in regenerative therapies. The goal of this study was to design several novel "nanofibrous extracellular matrices" (NF-ECMs) with a natural mesh-like 3D architecture through a unique needle-free multi-jet electrospinning method in highly controlled manner to comply with good manufacturing practices (GMP) for the production of advanced healthcare materials for regenerative medicine, and to test cellular behavior of human mesenchymal stem cells (HMSCs) on these. Biopolymers manufactured as 3D NF-ECM meshes under clinical grade GMP-like conditions show higher intrinsic cytobiocompatibility with superior cell integration and proliferation if compared to their 2D counterparts or a clinically-approved collagen membrane.

Dynamic regulation of bone morphogenetic proteins in engineered osteochondral constructs by biomechanical stimulation

Osteochondral tissue-engineered grafts are proposed to hold greater potential to repair/regenerate damaged cartilage through enhanced biochemical and mechanical interactions with underlying subchondral bone as compared to simple engineered cartilage. Additionally, biomechanical stimulation of articular chondrocytes (ACs) or osteoblasts (OBs) was shown to induce greater morphogenesis of the engineered tissues composed of these cells. In this report, to define the advantages of biomechanical stimulation to osteochondral grafts for tissue engineering, we examined whether (1) ACs and OBs in three-dimensional (3D) osteochondral constructs support functional development of each other at the molecular level, and (2) biomechanical stimulation of osteochondral constructs further promotes the regenerative potential of such grafts. Various configurations of cell/scaffold assemblies, including chondral, osseous, and osteochondral constructs, were engineered with mechano-responsive electrospun poly(ɛ-caprolactone) scaffolds. These constructs were subjected to either static or dynamic (10% cyclic compressive strain at 1 Hz for 3 h/day) culture conditions for 2 weeks. The expression of bone morphogenetic proteins (BMPs) was examined to assess the regenerative potential of each treatment on the cells. Biomechanical stimulation augmented a marked upregulation of Bmp2, Bmp6, and Bmp7 as well as downregulation of BMP antagonist, Bmp3, in a time-specific manner in the ACs and OBs of 3D osteochondral constructs. More importantly, the presence of biomechanically stimulated OBs was especially crucial for the induction of Bmp6 in ACs, a BMP required for chondrocytic growth and differentiation. Biomechanical stimulation led to enhanced tissue morphogenesis possibly through this BMP regulation, evident by the improved effective compressive modulus of the osteochondral constructs (710 kPa of dynamic culture vs. 280 kPa of static culture). Similar BMP regulation was observed in the femoral cartilages of the rats subjected to gentle exercise, demonstrating the physiological relevance of in vitro biomechanical stimulation of osteochondral constructs. Overall, our findings show that biomechanical stimulation may be critical for cross signaling between ACs and OBs to support chondrocytic growth in 3D osteochondral tissues.

Increasing the pore sizes of bone-mimetic electrospun scaffolds comprised of polycaprolactone, collagen I and hydroxyapatite to enhance cell infiltration

Bone-mimetic electrospun scaffolds consisting of polycaprolactone (PCL), collagen I and nanoparticulate hydroxyapatite (HA) have previously been shown to support the adhesion, integrin-related signaling and proliferation of mesenchymal stem cells (MSCs), suggesting these matrices serve as promising degradable substrates for osteoregeneration. However, the small pore sizes in electrospun scaffolds hinder cell infiltration in vitro and tissue-ingrowth into the scaffold in vivo, limiting their clinical potential. In this study, three separate techniques were evaluated for their capability to increase the pore size of the PCL/col I/nanoHA scaffolds: limited protease digestion, decreasing the fiber packing density during electrospinning, and inclusion of sacrificial fibers of the water-soluble polymer PEO. The PEO sacrificial fiber approach was found to be the most effective in increasing scaffold pore size. Furthermore, the use of sacrificial fibers promoted increased MSC infiltration into the scaffolds, as well as greater infiltration of endogenous cells within bone upon placement of scaffolds within calvarial organ cultures. These collective findings support the use of sacrificial PEO fibers as a means to increase the porosity of complex, bone-mimicking electrospun scaffolds, thereby enhancing tissue regenerative processes that depend upon cell infiltration, such as vascularization and replacement of the scaffold with native bone tissue.

Biomechanical forces exert anabolic effects on osteoblasts by activation of SMAD 1/5/8 through type 1 BMP receptor

Osteoblasts are mechanosensitive cells, which respond to biomechanical stimuli to regulate the bone structure through anabolic and catabolic gene regulation. To examine the effects of mechanical forces on the osteogenic responses through the SMAD signaling in osteoblasts, the cells were cultured in well-characterized mechanoresponsive 3-D scaffolds and exposed to 10% dynamic compressive strain (Cmp) at 1 Hz. Subsequently, SMAD phosphorylation and osteogenic gene induction was examined. Osteoblasts cultured in 3-D scaffolds exhibited increased constitutive SMAD 1/5/8 phosphorylation, as compared to monolayers cultures. This SMAD 1/5/8 phosphorylation was further upregulated after 10, 30 and 60 min in response to Cmp, exhibiting a peak activation at 30 min. No significant changes in SMAD2 phosphorylation were observed, suggesting signals generated by Cmp may not activate the Transforming Growth Factor-β signaling cascade. Subsequently, biomechanical stimulation-induced SMAD 1/5/8 phosphorylation upregulated the expression of osteogenic genes such as Osteoprotegrin, Msx2 and Runx2. Dorsomorphin, a selective inhibitor of the bone morphogenetic protein (BMP) receptor type 1 (BMPR1), blocked Cmp-induced SMAD 1/5/8 phosphorylation, as well as Osteoprotegrin, Msx2 and Runx2 gene expression. Collectively, the present findings demonstrate that biomechanical stimulation of osteoblasts activates SMAD 1/5/8 in the BMP signaling pathway through BMPR1 and may enhance osteogenesis by upregulating SMAD-dependent osteogenic genes.

Recent trends in nanofibrous membranes and their suitability for air and water filtrations

In recent decades, engineered membranes have become a viable separation technology for a wide range of applications in environmental, food and biomedical fields. Membranes are now competitive compared to conventional techniques such as adsorption, ion exchangers and sand filters. The main advantage of membrane technology is the fact that it works without the addition of any chemicals, with relatively high efficiency and low energy consumption with well arranged process conductions. Hence they are widely utilized in biotechnology, food and drink manufacturing, air filtration and medical uses such as dialysis for kidney failure patients. Membranes from nanofibrous materials possess high surface area to volume ratio, fine tunable pore sizes and their ease of preparation prompted both industry and academic researchers to study their use in many applications. In this paper, modern concepts and current research progress on various nanofibrous membranes, such as water and air filtration media, are presented.

A multi-scaled hybrid orthopedic implant: bone ECM-shaped Sr-HA nanofibers on the microporous walls of a macroporous titanium scaffold

We report here, for the first time, a novel multi-scaled hybrid orthopedic implant material consisting of a macroporous Ti scaffold, whose macropores' walls have a microporous titania layer which is fully covered with nanofibers of Sr-doped hydroxyapatite (Sr-HA). The microporous titania layer is formed on and within the Ti scaffold by micro-arc oxidation, which firmly binds to the Ti substrate and contains Ca2+, Sr2+ and PO4(3-) ions. It is then hydrothermally treated to form Sr-HA nanofibers. During the hydrothermal treatment, Sr-HA nanoprisms nucleate from Ca0.5Sr0.5TiO3 pre-formed on the TiO2 and grow in length to nanofibers at the expense of Ca2+, Sr2+ and PO4(3-) ions that migrate from the TiO2. These Sr-HA nanofibers construct a network structure similar to the hierarchical organization of bone extracellular matrix (ECM), and the resulting nanofibrous surface displays a firm adhesion to substrate, superhydrophilicity and apatite-inducing ability. The induced apatite prefers to nucleate on the basal-faceted surfaces of Sr-HA nanofibers. The nanofiber-walled scaffold has a great potential for load-bearing orthotopic use.

Flexible polymeric ultrathin film for mesenchymal stem cell differentiation

Ultrathin films (also called nanofilms) are two-dimensional (2-D) polymeric structures with potential application in biology, biotechnology, cosmetics and tissue engineering. Since they can be handled in liquid form with micropipettes or tweezers they have been proposed as flexible systems for cell adhesion and proliferation. In particular, with the aim of designing a novel patch for bone or tendon repair and healing, in this work the biocompatibility, adhesion and proliferation activity of Saos-2, MRC-5 and human and rat mesenchymal stem cells on poly(lactic acid) nanofilms were evaluated. The nanofilms did not impair the growth and differentiation of osteoblasts and chondrocytes. Moreover, nanofilm adhesion to rabbit joints was evident under ex vivo conditions.

Regulation of the matrix microenvironment for stem cell engineering and regenerative medicine

The extracellular matrix (ECM) microenvironment consists of structural and functional molecules. The ECM relays both biochemical and biophysical cues to and from the cells to modulate cell behavior and function. The biophysical cues can be engineered and applied to cells by means of spatial patterning, matrix rigidity, and matrix actuation. Tissue engineering strategies that utilize ECMs to direct stem cell organization and lineage specification show tremendous potential. This review describes the technologies for modulating ECM spatial patterning, matrix rigidity, chemical composition, and matrix actuation. The role of ECMs in vascular tissue engineering is then discussed as a model of tissue engineering and regenerative medicine.

Effects of nanofiber/stem cell composite on wound healing in acute full-thickness skin wounds

Acute full-thickness skin wounds (FTSW) caused by extensive burns or high-energy trauma are not adequately addressed by current clinical treatments. This study hypothesized that biomimetic nanofiber scaffolds (NFSs) functionalized with rich attachment of bone-marrow-derived mesenchymal stem cells (BM-MSCs) can promote wound healing in acute FTSW. Results in a rat model showed that both NFS and BM-MSCs contributed to the wound healing. Wounds in NFS group with a higher density of BM-MSCs achieved complete closure 8 days earlier than the control group. Implanted BM-MSCs were found to promote epithelial edge ingrowth and collagen synthesis. The colocation of BM-MSCs (tagged with quantum-dots) with the expression of keratin 10 and filaggrin indicated the participation of BM-MSCs in epidermal differentiation at early and intermediate stages under the local wounding environment. Overall, this study suggests a great potential of using NFS/BM-MSC composites for the treatment of acute FTSW.

Nanoscaffold based stem cell regeneration therapy: recent advancement and future potential

IMPORTANCE OF THE FIELD

Over the past years, extensive research has been directed towards tissue engineering using conventional scaffolds. In-depth studies in this field have led to the realization that in vivo cells interact with the extracellular matrix, composed of nanofibers at sub-micron scale, which not only provides the mechanical support to the cells but also plays a key role in regulation of cellular behavior. This has led to the development of nanofibrous scaffold (NFS) technology which in combination with stem cells is emerging as an important tool in the development of tissue engineering and regenerative medicine.

AREAS COVERED IN THIS REVIEW

This review summarizes the three methods of nanofibrous scaffold preparation and provides a state-of-the-art update on the recent advancement in the use of nanoscaffolds in stem cell regeneration therapy.

WHAT THE READER WILL GAIN

The review gives the reader an insight on nanoscaffold based therapy methods, such as how these scaffolds can potentially be designed and used in successful development of stem cell based therapies.

TAKE HOME MESSAGE

NFS technology when coupled with stem cells and exploited in the right way has a strong potential of being used in stem cell based regenerative medicine.

One-step recovery of marrow stromal cells on nanofibers

This study describes the one-step isolation and expansion of marrow stromal cells (MSCs) directly onto the implantable nanofibrous scaffolds. Coverslips were first coated with either aligned or random configurations of poly L,D lactic acid, poly lactic-glycolic acid, and poly-epsilon-caprolactone and then seeded with fresh bone marrow aspirate. Colony-forming units were quantified and the differentiation capacities of the recovered cells were explored. Further optimization was provided by exploring the impact of hyperoxic (21% O(2)) and physiologically approximate (2% O(2)) on cell recovery. Aligned nanofibers in 2% O(2) were identified as being superior for isolation of MSCs. Isolated cells formed colonies following the direction of nanofibers, indicating potential for guided tissue regeneration. The isolated MSCs demonstrated retention of multipotency. These findings offer a rapid, cost-effective method of producing a stem-cell-seeded scaffold for regeneration of multiple tissue types.