3D-bioengineered model of human skeletal muscle tissue with phenotypic features of aging for drug testing purposes

A Micromanipulation-Actuated Large-Scale Screening to Identify Optimized Microphysiological Model Parameters in Skeletal Muscle Regeneration

Hydrogel-based 3D cell cultures are extensively utilized to create biomimetic cellular microstructures. However, there is still lack of effective method for both evaluation of the complex interaction of cells with hydrogel and the functionality of the resulting micro-structures. This limitation impedes the further application of these microstructures as microphysiological models (microPMs) for the screening of potential culture condition combinations to enhance the skeletal muscle regeneration. This paper introduces a two-probe micromanipulation method for the large-scale assessment of viscoelasticity and contractile force (CF) of skeletal muscle microPMs, which are produced in high-throughput via microfluidic spinning and 96-well culture. The collected data demonstrate that viscoelasticity parameters (E* and tanδ) and CF both measured in a solution environment are indicative of the formation of cellular structures without hydrogel residue and the subsequent generation of myotubes, respectively. This study have developed screening criterias that integrate E*, tanδ, and CF to examine the effects of multifactorial interactions on muscle fiber repair under hypoxic conditions and within bioprinted bipennate muscle structures. This approach has improved the quality of hypoxic threshold evaluation and aligned cell growth in 3D. The proposed method is useful in exploring the role of different factors in muscle tissue regeneration with limited resources.

Recent applications of three-dimensional bioprinting in drug discovery and development

The ability of three-dimensional (3D) bioprinting to fabricate biomimetic organ and disease models has been recognised to be promising for drug discovery and development as 3D bioprinted models can better mimic human physiology compared to two-dimensional (2D) cultures and animal models. This is useful for target selection where disease models can be studied to understand disease pathophysiology and identify disease-linked compounds. Lead identification and preclinical studies also benefit from 3D bioprinting as 3D bioprinted models can be utilised in high-throughput screening (HTS) systems and to produce efficacy and safety data that closely resembles clinical observations. Although no published applications of 3D bioprinting in clinical trials were found, there are two clinical trials planning to evaluate the predictive ability of 3D bioprinted models by comparing human and model responses to the same chemotherapy. Overall, this review provides a comprehensive summary of the latest applications of 3D bioprinting in drug discovery and development.

Studying the impact of geometrical and cellular cues on myogenesis with a skeletal muscle-on-chip

In the skeletal muscle tissue, cells are organized following an anisotropic architecture, which is both required during myogenesis when muscle precursor cells fuse to generate myotubes and for its contractile function. To build an in vitro skeletal muscle tissue, it is therefore essential to develop methods to organize cells in an anisotropic fashion, which can be particularly challenging, especially in 3D. In this study, we present a versatile muscle-on-chip system with adjustable collagen hollow tubes that can be seeded with muscle precursor cells. The collagen acts both as a tube-shaped hollow mold and as an extracellular matrix scaffold that can house other cell types for co-culture. We found that the diameter of the channel affects the organization of the muscle cells and that proper myogenesis was obtained at a diameter of 75 μm. In these conditions, muscle precursor cells fused into long myotubes aligned along these collagen channels, resulting in a fascicle-like structure. These myotubes exhibited actin striations and upregulation of multiple myogenic genes, reflecting their maturation. Moreover, we showed that our chip allowed muscle tissue culture and maturation over a month, with the possibility of fibroblast co-culture embedding in the collagen matrix.

Ethics and responsibility in biohybrid robotics research

The industrial revolution of the 19th century marked the onset of an era of machines and robots that transformed societies. Since the beginning of the 21st century, a new generation of robots envisions similar societal transformation. These robots are biohybrid: part living and part engineered. They may self-assemble and emerge from complex interactions between living cells. While this new era of living robots presents unprecedented opportunities for positive societal impact, it also poses a host of ethical challenges. A systematic, nuanced examination of these ethical issues is of paramount importance to guide the evolution of this nascent field. Multidisciplinary fields face the challenge that inertia around collective action to address ethical boundaries may result in unexpected consequences for researchers and societies alike. In this Perspective, we i) clarify the ethical challenges associated with biohybrid robotics, ii) discuss the need for and elements of a potential governance framework tailored to this technology; and iii) propose tangible steps toward ethical compliance and policy formation in the field of biohybrid robotics.

Merging BioActuation and BioCapacitive properties: A 3D bioprinted devices to self-stimulate using self-stored energy

Biofabrication of three-dimensional (3D) cultures through the 3D Bioprinting technique opens new perspectives and applications of cell-laden hydrogels. However, to continue with the progress, new BioInks with specific properties must be carefully designed. In this study, we report the synthesis and 3D Bioprinting of an electroconductive BioInk made of gelatin/fibrinogen hydrogel, C2C12 mouse myoblast and 5% w/w of conductive poly (3,4-ethylenedioxythiophene) nanoparticles (PEDOT NPs). The influence of PEDOT NPs, incorporated in the cell-laden BioInk, not only showed a positive effect in cells viability, differentiation and myotube functionalities, also allowed the printed constructs to behaved as BioCapacitors. Such devices were able to electrochemically store a significant amount of energy (0.5 mF/cm2), enough to self-stimulate as BioActuator, with typical contractions ranging from 27 to 38 μN, during nearly 50 min. The biofabrication of 3D constructs with the proposed electroconductive BioInk could lead to new devices for tissue engineering, biohybrid robotics or bioelectronics.

Leveraging Biomaterial Platforms to Study Aging-Related Neural and Muscular Degeneration

Aging is a complex multifactorial process that results in tissue function impairment across the whole organism. One of the common consequences of this process is the loss of muscle mass and the associated decline in muscle function, known as sarcopenia. Aging also presents with an increased risk of developing other pathological conditions such as neurodegeneration. Muscular and neuronal degeneration cause mobility issues and cognitive impairment, hence having a major impact on the quality of life of the older population. The development of novel therapies that can ameliorate the effects of aging is currently hindered by our limited knowledge of the underlying mechanisms and the use of models that fail to recapitulate the structure and composition of the cell microenvironment. The emergence of bioengineering techniques based on the use of biomimetic materials and biofabrication methods has opened the possibility of generating 3D models of muscular and nervous tissues that better mimic the native extracellular matrix. These platforms are particularly advantageous for drug testing and mechanistic studies. In this review, we discuss the developments made in the creation of 3D models of aging-related neuronal and muscular degeneration and we provide a perspective on the future directions for the field.

Investigating the effects of Argireline in a skin serum containing hyaluronic acids on skin surface wrinkles using the Visia® Complexion Analysis camera system for objective skin analysis

Objective

To analyze the effects of Argireline on skin surface wrinkles using the Visia® camera system developed by Canfield Scientific Inc., U.S.A., for facial image capture.

Method

Nineteen female participants were recruited from a plastic surgery clinic. Initial facial images captured the left, front, and right sides of the participants' faces, which were documented as timepoint one. Following this, the participants immediately began to apply a facial skin serum containing triple hyaluronic acids produced by CNC cosmetic GmbH, Philippsburg, Germany. The serum was applied once in the morning and once in the evening. Participants received two identical containers labeled L for left and R for right, with each container to be used on the corresponding facial side, particularly around the eye area. One container contained Argireline, a synthetic hexapeptide, which previously was deemed to be a biosafe alternative to botulinum neurotoxin. The study was conducted as double-blind; neither the participants nor researchers knew which of the two containers contained Argireline. Participants were allowed to use their own cosmetic products throughout the study. After four weeks, the participants returned to have their faces recaptured using the Visia® camera, which was documented as timepoint two. The absolute scores of the wrinkles were noted, and results on both sides of the face were calculated and compared. The "TruSkinAge®" measurement provided by the Visia® camera was reviewed for each face side. Results between both time points and both sides of the face were compared. After the data analysis was complete, the company was contacted to determine which container contained Argireline.

Results

Nineteen participants returned for facial image capture. There were no significant adverse events, allergic reactions, or skin irritations. The investigation revealed that the wrinkle score slightly decreased for the right and left side of the face following four weeks of serum application. However, this decrease was not significant (p>0.05) based on the Wilcoxon matched pairs tests for the wrinkle scores (right side p=0.060 and left side p=0.176) and Truskin Ages® results (right side p=0.096 and left side p=0.489).Comparing the data from the right side with that from the left side of the face revealed that neither demonstrated a significant reduction in wrinkle score (p=0.829) or Truskin Ages® results (p=0.804). Argireline was included in the serum applied to the right side of the face. However, no statistical significance was seen in the results on this side of the face indicating any possible effects.

Conclusion

Wrinkle scores and Truskin Ages® results were observed to decrease non-significantly following the application of a skin serum involving hyaluronic acid. The Visia® imaging method was used to analyze the data objectively. Differences between both sides of the face that were treated with and without Argireline were not statistically significant. Therefore, the effect of Argireline was not proven. While Argireline presented with low toxicity, its efficacy was found not to be significant. Therefore, it is not deemed to be an alternative treatment to botulinum toxin.

Bioengineered 3D Skeletal Muscle Model Reveals Complement 4b as a Cell-Autonomous Mechanism of Impaired Regeneration with Aging

A mechanistic understanding of cell-autonomous skeletal muscle changes after injury can lead to novel interventions to improve functional recovery in an aged population. However, major knowledge gaps persist owing to limitations of traditional biological aging models. 2D cell culture represents an artificial environment, while aging mammalian models are contaminated by influences from non-muscle cells and other organs. Here, a 3D muscle aging system is created to overcome the limitations of these traditional platforms. It is shown that old muscle constructs (OMC) manifest a sarcopenic phenotype, as evidenced by hypotrophic myotubes, reduced contractile function, and decreased regenerative capacity compared to young muscle constructs. OMC also phenocopy the regenerative responses of aged muscle to two interventions, pharmacological and biological. Interrogation of muscle cell-specific mechanisms that contribute to impaired regeneration over time further reveals that an aging-induced increase of complement component 4b (C4b) delays muscle progenitor cell amplification and impairs functional recovery. However, administration of complement factor I, a C4b inactivator, improves muscle regeneration in vitro and in vivo, indicating that C4b inhibition may be a novel approach to enhance aged muscle repair. Collectively, the model herein exhibits capabilities to study cell-autonomous changes in skeletal muscle during aging, regeneration, and intervention.

Development of a simple and versatile in vitro method for production, stimulation, and analysis of bioengineered muscle

In recent years, 3D in vitro modeling of human skeletal muscle has emerged as a subject of increasing interest, due to its applicability in basic studies or screening platforms. These models strive to recapitulate key features of muscle architecture and function, such as cell alignment, maturation, and contractility in response to different stimuli. To this end, it is required to culture cells in biomimetic hydrogels suspended between two anchors. Currently available protocols are often complex to produce, have a high rate of breakage, or are not adapted to imaging and stimulation. Therefore, we sought to develop a simplified and reliable protocol, which still enabled versatility in the study of muscle function. In our method, we have used human immortalized myoblasts cultured in a hydrogel composed of MatrigelTM and fibrinogen, to create muscle strips suspended between two VELCROTM anchors. The resulting muscle constructs show a differentiated phenotype and contractile activity in response to electrical, chemical and optical stimulation. This activity is analyzed by two alternative methods, namely contraction analysis and calcium analysis with Fluo-4 AM. In all, our protocol provides an optimized version of previously published methods, enabling individual imaging of muscle bundles and straightforward analysis of muscle response with standard image analysis software. This system provides a start-to-finish guide on how to produce, validate, stimulate, and analyze bioengineered muscle. This ensures that the system can be quickly established by researchers with varying degrees of expertise, while maintaining reliability and similarity to native muscle.

Reversible Deformation of Artificial Cell Colonies Triggered by Actin Polymerization for Muscle Behavior Mimicry

The use of artificial cells to mimic living tissues is beneficial for understanding the mechanism of interaction among cells. Artificial cells hold immense potential in the field of tissue engineering. Self-powered artificial cells capable of reversible deformation are developed by encapsulating living mitochondria, actins, and methylcellulose. Upon addition of pyruvate molecules, the mitochondria produce adenosine triphosphate (ATP), which acts as an energy source to trigger actin polymerization. The reversible deformation of artificial cells occurs with a spindle shape resulting from the polymerization of actins to form filaments adjacent to the lipid bilayer that subsequently returns to a spherical shape resulting from the depolymerization of actin filaments upon laser irradiation. The linear colonies composed of these artificial cells exhibit collective contraction and relaxation to mimic muscle tissues. At maximum contraction, the long axis of each giant unilamellar vesicle (GUV) is parallel to each other. All the colonies are synchronized in the contraction phase. The deformation of each GUV in the colonies is influenced by its adjacent GUVs. The muscle-like artificial cell colonies described here pave the way to develop sustainably self-powered artificial tissues.

A simple and scalable 3D printing methodology for generating aligned and extended human and murine skeletal muscle tissues

Preclinical biomedical and pharmaceutical research on disease causes, drug targets, and side effects increasingly relies on in vitro models of human tissue. 3D printing offers unique opportunities for generating models of superior physiological accuracy, as well as for automating their fabrication. Towards these goals, we here describe a simple and scalable methodology for generating physiologically relevant models of skeletal muscle. Our approach relies on dual-material micro-extrusion of two types of gelatin hydrogel into patterned soft substrates with locally alternating stiffness. We identify minimally complex patterns capable of guiding the large-scale self-assembly of aligned, extended, and contractile human and murine skeletal myotubes. Interestingly, we find high-resolution patterning is not required, as even patterns with feature sizes of several hundred micrometers is sufficient. Consequently, the procedure is rapid and compatible with any low-cost extrusion-based 3D printer. The generated myotubes easily span several millimeters, and various myotube patterns can be generated in a predictable and reproducible manner. The compliant nature and adjustable thickness of the hydrogel substrates, serves to enable extended culture of contractile myotubes. The method is further readily compatible with standard cell-culturing platforms as well as commercially available electrodes for electrically induced exercise and monitoring of the myotubes.