Human-engineered auricular reconstruction (hEAR) by 3D-printed molding with human-derived auricular and costal chondrocytes and adipose-derived mesenchymal stem cells

Histological assessment of microtia cartilage, a potential source of autograft tissue in ear reconstruction

Cartilage is a strong and flexible connective tissue that has many forms and functions in our body. While cartilage exhibits some forms of limited repair, for the most part, it is not particularly regenerative. Thus, in situations where patients require cartilage reconstruction, surgeons may use autografts to replace missing or damaged tissue. Cartilage tissues from different regions of the body exhibit histological differences and are in limited supply. Thus, it is important to characterize these differences to determine the most appropriate autograft source. In the case of microtia, a congenital deformity where the pinna is underdeveloped, reconstruction commonly utilizes cartilage sourced from a patient's own costal cartilage. This presents a potential morbidity risk. In this study, we evaluate the histological characteristics of microtia cartilage compared with normal auricular and costal cartilage obtained from human patients undergoing surgical resection. Histochemistry was used to evaluate cellularity, lipid content, and ECM content. Using a Bayesian statistical approach, we determined that while costal cartilage is the standard tissue donor, the microanatomy of microtia cartilage more closely reflects normal auricular cartilage than costal cartilage. Therefore, microtia cartilage may serve as an additional reservoir for cartilage during reconstruction.

3D printing tissue-engineered scaffolds for auricular reconstruction

Congenital microtia is the most common cause of auricular defects, with a prevalence of approximately 5.18 per 10,000 individuals. Autologous rib cartilage grafting is the leading treatment modality at this stage of auricular reconstruction currently. However, harvesting rib cartilage may lead to donor site injuries, such as pneumothorax, postoperative pain, chest wall scarring, and deformity. Therefore, in the pursuit of better graft materials, biomaterial scaffolds with great histocompatibility, precise control of morphology, non-invasiveness properties are gradually becoming a new research hotspot in auricular reconstruction. This review collectively presents the exploit and application of 3D printing biomaterial scaffold in auricular reconstruction. Although the tissue-engineered ear still faces challenges before it can be widely applied to patients in clinical settings, and its long-term effects have yet to be evaluated, we aim to provide guidance for future research directions in 3D printing biomaterial scaffold for auricular reconstruction. This will ultimately benefit the translational and clinical application of cartilage tissue engineering and biomaterials in the treatment of auricular defects.

Decreased Tiam1-mediated Rac1 activation is responsible for impaired directional persistence of chondrocyte migration in microtia

The human auricle has a complex structure, and microtia is a congenital malformation characterized by decreased size and loss of elaborate structure in the affected ear with a high incidence. Our previous studies suggest that inadequate cell migration is the primary cytological basis for the pathogenesis of microtia, however, the underlying mechanism is unclear. Here, we further demonstrate that microtia chondrocytes show a decreased directional persistence during cell migration. Directional persistence can define a leading edge associated with oriented movement, and any mistakes would affect cell function and tissue morphology. By the screening of motility-related genes and subsequent confirmations, active Rac1 (Rac1-GTP) is identified to be critical for the impaired directional persistence of microtia chondrocytes migration. Moreover, Rho guanine nucleotide exchange factors (GEFs) and Rho GTPase-activating proteins (GAPs) are detected, and overexpression of Tiam1 significantly upregulates the level of Rac1-GTP and improves directional migration in microtia chondrocytes. Consistently, decreased expression patterns of Tiam1 and active Rac1 are found in microtia mouse models, Bmp5se/J and Prkralear-3J/GrsrJ. Collectively, our results provide new insights into microtia development and therapeutic strategies of tissue engineering for microtia patients.

Advancements in culture technology of adipose-derived stromal/stem cells: implications for diabetes and its complications

Stem cell-based therapies exhibit considerable promise in the treatment of diabetes and its complications. Extensive research has been dedicated to elucidate the characteristics and potential applications of adipose-derived stromal/stem cells (ASCs). Three-dimensional (3D) culture, characterized by rapid advancements, holds promise for efficacious treatment of diabetes and its complications. Notably, 3D cultured ASCs manifest enhanced cellular properties and functions compared to traditional monolayer-culture. In this review, the factors influencing the biological functions of ASCs during culture are summarized. Additionally, the effects of 3D cultured techniques on cellular properties compared to two-dimensional culture is described. Furthermore, the therapeutic potential of 3D cultured ASCs in diabetes and its complications are discussed to provide insights for future research.

Autologous Costal Chondral/Osteochondral Transplantation and Costa-Derived Chondrocyte Implantation for Articular Cartilage Repair: Basic Science and Clinical Applications

There has been increasing application of autologous costal chondral/osteochondral transplantation (ACCT/ACOT) and costa-derived chondrocyte implantation (ACCI) for articular cartilage repair over the past three decades. This review presents the major evidence on the properties of costal cartilage and bone and their qualifications as grafts for articular cartilage repair, the major clinical applications, and the risks and strategies for costal chondral/osteochondral graft(s) harvest. First, costal cartilage has many specific properties that help restore the articular surface. Costa, which can provide abundant cartilage and cylindrical corticocancellous bone, preserves permanent chondrocyte and is the largest source of hyaline cartilage. Second, in the past three decades, autologous costal cartilage-derived grafts, including cartilage, osteochondral graft(s), and chondrocyte, have expanded their indications in trauma and orthopaedic therapy from small to large joints, from the upper to lower limbs, and from non-weight-bearing to weight-bearing joints. Third, the rate of donor-site complications of ACCT or ACOT is low, acceptable, and controllable, and some skills and accumulated experience can help reduce the risks of ACCT and ACOT. Costal cartilage-derived autografting is a promising technique and could be an ideal option for articular chondral lesions with or without subchondral cysts. More high-quality clinical studies are urgently needed to help us further understand the clinical value of such technologies.

Elastomeric Polyesters in Cardiovascular Tissue Engineering and Organs-on-a-Chip

Cardiovascular tissue constructs provide unique design requirements due to their functional responses to substrate mechanical properties and cyclic stretching behavior of cardiac tissue that requires the use of durable elastic materials. Given the diversity of polyester synthesis approaches, an opportunity exists to develop a new class of biocompatible, elastic, and immunomodulatory cardiovascular polymers. Furthermore, elastomeric polyester materials have the capability to provide tailored biomechanical synergy with native tissue and hence reduce inflammatory response in vivo and better support tissue maturation in vitro. In this review, we highlight underlying chemistry and design strategies of polyester elastomers optimized for cardiac tissue scaffolds. The major advantages of these materials such as their tunable elasticity, desirable biodegradation, and potential for incorporation of bioactive compounds are further expanded. Unique fabrication methods using polyester materials such as micromolding, 3D stamping, electrospinning, laser ablation, and 3D printing are discussed. Moreover, applications of these biomaterials in cardiovascular organ-on-a-chip devices and patches are analyzed. Finally, we outline unaddressed challenges in the field that need further study to enable the impactful translation of soft polyesters to clinical applications.

The Promise of Regenerative Medicine in the Reconstruction of Auricular Cartilage Deformities

There are many physiologic and psychologic challenges associated with ear cartilage deformities which are incredibly distasteful to patients, particularly children. The development of regenerative medicine (RM) sciences has opened up a new window for the reconstruction of auricular cartilage because it allows the creation of a structure similar to the auricular in appearance and function. As part of this review, we discuss the role that each RM tool, including tissue engineering, cells, and biomolecules, plays in developing engineered auricular tissue. In previous studies, it was shown that the simultaneous use of natural and synthetic biomaterials as well as three-dimensional printing techniques could improve the biological and mechanical properties of this tissue. Another critical issue is using stem cells and differentiated cartilage cells to produce tissue-specific cellular structures and extracellular matrix. Also, the importance of choosing a suitable animal model in terms of handling and care facilities, physiologic similarities to humans, and breed uniformity in the preclinical assessments have been highlighted. Then, the clinical trials registered on the clinicaltrials.gov website, and the commercialized product, called AuriNovo, have been comprehensively explained. Overall, it is important to provide engineered auricular cartilage structures with acceptable safety and efficacy compared with standard methods, autologous cartilage transplantation, and prosthetic reconstruction in RM.

Cartilage Tissue Engineering for Nasal Alar and Auricular Reconstruction: A Critical Review of the Literature and Implications for Practice in Dermatologic Surgery

BACKGROUND

Reconstructing defects requiring replacement of nasal or auricular cartilage after Mohs micrographic surgery can at times be challenging. While autologous cartilage grafting is considered the mainstay for repair, it may be limited by cartilage quality/quantity, donor site availability/morbidity, and surgical complications. Tissue-engineered cartilage has recently shown promise for repairing properly selected facial defects.

OBJECTIVE

To (1) provide a comprehensive overview of the literature on the use of tissue-engineered cartilage for nasal alar and auricular defects, and (2) discuss this technology's advantages and future implications for dermatologic surgery.

MATERIALS AND METHODS

A literature search was performed using PubMed/MEDLINE and Google Scholar databases. Studies discussing nasal alar or auricular cartilage tissue engineering were included.

RESULTS

Twenty-seven studies were included. Using minimal donor tissue, tissue-engineered cartilage can create patient-specific, three-dimensional constructs that are biomechanically and histologically similar to human cartilage. The constructs maintain their shape and structural integrity after implantation into animal and human models.

CONCLUSION

Tissue-engineered cartilage may be able to replace native cartilage in reconstructing nasal alar and auricular defects given its ability to overcome several limitations of autologous cartilage grafting. Although further research is necessary, dermatologic surgeons should be aware of this innovative technique and its future implications.

The application and progress of stem cells in auricular cartilage regeneration: a systematic review

Background: The treatment of microtia or acquired ear deformities by surgery is a significant challenge for plastic and ENT surgeons; one of the most difficult points is constructing the scaffold for auricular reconstruction. As a type of cell with multiple differentiation potentials, stem cells play an essential role in the construction of cartilage scaffolds, and therefore have received widespread attention in ear reconstructive research. Methods: A literature search was conducted for peer-reviewed articles between 2005 and 2023 with the following keywords: stem cells; auricular cartilage; ear cartilage; conchal cartilage; auricular reconstruction, regeneration, and reparation of chondrocytes; tissue engineering in the following databases: PubMed, MEDLINE, Cochrane, and Ovid. Results: Thirty-three research articles were finally selected and their main characteristics were summarized. Adipose-derived stem cells (ADSCs), bone marrow mesenchymal stem cells (BMMSCs), perichondrial stem/progenitor cells (PPCs), and cartilage stem/progenitor cells (CSPCs) were mainly used in chondrocyte regeneration. Injecting the stem cells into the cartilage niche directly, co-culturing the stem cells with the auricular cartilage cells, and inducing the cells in the chondrogenic medium in vitro were the main methods that have been demonstrated in the studies. The chondrogenic ability of these cells was observed in vitro, and they also maintained good elasticity and morphology after implantation in vivo for a period of time. Conclusion: ADSC, BMMSC, PPC, and CSPC were the main stem cells that have been researched in craniofacial cartilage reconstruction, the regenerative cartilage performed highly similar to normal cartilage, and the test of AGA and type II collagen content also proved the cartilage property of the neo-cartilage. However, stem cell reconstruction of the auricle is still in the initial stage of animal experiments, transplantation with such scaffolds in large animals is still lacking, and there is still a long way to go.

Fibronectin matrix assembly and TGFβ1 presentation for chondrogenesis of patient derived pericytes for microtia repair

Tissue engineered cartilage for external ear reconstruction of congenital deformities, such as microtia or resulting from trauma, remains a significant challenge for plastic and reconstructive surgeons. Current strategies involve harvesting autologous costal cartilage or expanding autologous chondrocytes ex vivo. However, these procedures often lead to donor site morbidity and a cell source with limited expansion capacity. Stromal stem cells such as perivascular stem cells (pericytes) offer an attractive alternative cell source, as they can be isolated from many human tissues, readily expanded in vitro and possess chondrogenic differentiation potential. Here, we successfully isolate CD146+ pericytes from the microtia remnant from patients undergoing reconstructive surgery (Microtia pericytes; MPs). Then we investigate their chondrogenic potential using the polymer poly(ethyl acrylate) (PEA) to unfold the extracellular matrix protein fibronectin (FN). FN unfolding exposes key growth factor (GF) and integrin binding sites on the molecule, allowing tethering of the chondrogenic GF transforming growth factor beta 1 (TGFβ1). This system leads to solid-phase, matrix-bound, GF presentation in a more physiological-like manner than that of typical chondrogenic induction media (CM) formulations that tend to lead to off-target effects. This simple and controlled material-based approach demonstrates similar chondrogenic potential to CM, while minimising proclivity toward hypertrophy, without the need for complex induction media formulations.

Genetically engineered chondrocytes overexpressing elastin improve cell retention and chondrogenesis in a three-dimensional GelMA culture system

Elastic cartilage possesses many elastic fibers and has a high degree of elasticity. However, insufficient elastic fiber production remains unsolved in elastic cartilage tissue engineering. Exogenous elastin is difficult to degrade and violates cell proliferation and migration during cartilage regeneration. Moreover, exogenous elastic fibers are difficult to assemble with endogenous extracellular matrix components. We produced genetically engineered chondrocytes overexpressing elastin to boost endogenous elastic fiber production. After identifying that genetic manipulation hardly impacted the cell viability and chondrogenesis of chondrocytes, we co-cultured genetically engineered chondrocytes with untreated chondrocytes in a three-dimensional gelatin methacryloyl (GelMA) system. In vitro study showed that the co-culture system produced more elastic fibers and increased cell retention, resulting in strengthened mechanics than the control system with untreated chondrocytes. Moreover, in vivo implantation revealed that the co-culture GelMA system greatly resisted host tissue invasion by promoting elastic fiber production and cartilage tissue regeneration compared with the control system. In summary, our study indicated that genetically engineered chondrocytes overexpressing elastin are efficient and safe for promoting elastic fiber production and cartilage regeneration in elastic cartilage tissue engineering.