1
|
Piskarev Y, Sun Y, Righi M, Boehler Q, Chautems C, Fischer C, Nelson BJ, Shintake J, Floreano D. Fast-Response Variable-Stiffness Magnetic Catheters for Minimally Invasive Surgery. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2024; 11:e2305537. [PMID: 38225742 DOI: 10.1002/advs.202305537] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/09/2023] [Revised: 12/13/2023] [Indexed: 01/17/2024]
Abstract
In minimally invasive surgery, such as cardiac ablation, magnetically steered catheters made of variable-stiffness materials can enable higher dexterity and higher force application to human tissue. However, the long transition time between soft and rigid states leads to a significant increase in procedure duration. Here, a fast-response, multisegmented catheter is described for minimally invasive surgery made of variable-stiffness thread (FRVST) that encapsulates a helical cooling channel. The rapid stiffness change in the FRVST, composed of a nontoxic shape memory polymer, is achieved by an active cooling system that pumps water through the helical channel. The FRVST displays a 66 times stiffness change and a 26 times transition enhancement compare with the noncooled version. The catheter allows for selective bending of each segment up to 127° in air and up to 76° in water under an 80 mT external magnetic field. The inner working channel can be used for cooling an ablation tip during a procedure and for information exchange via the deployment of wires or surgical tools.
Collapse
Affiliation(s)
- Yegor Piskarev
- Laboratory of Intelligent Systems, Institute of Mechanical Engineering, School of Engineering, École Polytechnique Fédérale de Lausanne, Lausanne, 1015, Switzerland
| | - Yi Sun
- Laboratory of Intelligent Systems, Institute of Mechanical Engineering, School of Engineering, École Polytechnique Fédérale de Lausanne, Lausanne, 1015, Switzerland
| | - Matteo Righi
- Laboratory of Intelligent Systems, Institute of Mechanical Engineering, School of Engineering, École Polytechnique Fédérale de Lausanne, Lausanne, 1015, Switzerland
| | - Quentin Boehler
- Multi-Scale Robotics Lab, Tannenstrasse 3, ETH Zurich, Zurich, 8092, Switzerland
| | - Christophe Chautems
- Multi-Scale Robotics Lab, Tannenstrasse 3, ETH Zurich, Zurich, 8092, Switzerland
| | - Cedric Fischer
- Multi-Scale Robotics Lab, Tannenstrasse 3, ETH Zurich, Zurich, 8092, Switzerland
| | - Bradley J Nelson
- Multi-Scale Robotics Lab, Tannenstrasse 3, ETH Zurich, Zurich, 8092, Switzerland
| | - Jun Shintake
- Shintake Research Group, School of Informatics and Engineering, The University of Electro-Communications, 1-5-1 Chofugaoka, Chofu, Tokyo, 182-8585, Japan
| | - Dario Floreano
- Laboratory of Intelligent Systems, Institute of Mechanical Engineering, School of Engineering, École Polytechnique Fédérale de Lausanne, Lausanne, 1015, Switzerland
| |
Collapse
|
2
|
Baines R, Zuliani F, Chennoufi N, Joshi S, Kramer-Bottiglio R, Paik J. Multi-modal deformation and temperature sensing for context-sensitive machines. Nat Commun 2023; 14:7499. [PMID: 37980333 PMCID: PMC10657382 DOI: 10.1038/s41467-023-42655-y] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/11/2023] [Accepted: 10/17/2023] [Indexed: 11/20/2023] Open
Abstract
Owing to the remarkable properties of the somatosensory system, human skin compactly perceives myriad forms of physical stimuli with high precision. Machines, conversely, are often equipped with sensory suites constituted of dozens of unique sensors, each made for detecting limited stimuli. Emerging high degree-of-freedom human-robot interfaces and soft robot applications are delimited by the lack of simple, cohesive, and information-dense sensing technologies. Stepping toward biological levels of proprioception, we present a sensing technology capable of decoding omnidirectional bending, compression, stretch, binary changes in temperature, and combinations thereof. This multi-modal deformation and temperature sensor harnesses chromaticity and intensity of light as it travels through patterned elastomer doped with functional dyes. Deformations and temperature shifts augment the light chromaticity and intensity, resulting in a one-to-one mapping between stimulus modes that are sequentially combined and the sensor output. We study the working principle of the sensor via a comprehensive opto-thermo-mechanical assay, and find that the information density provided by a single sensing element permits deciphering rich and diverse human-robot and robot-environmental interactions.
Collapse
Affiliation(s)
- Robert Baines
- School of Engineering & Applied Science, Yale University, 9 Hillhouse Avenue, New Haven, CT, 06520, USA
- School of Engineering, Ecole Polytechnique Fédérale de Lausanne, EPFL STI IGM RRL MED 1 2313 Station 9, Vaud, 1025, Switzerland
| | - Fabio Zuliani
- School of Engineering, Ecole Polytechnique Fédérale de Lausanne, EPFL STI IGM RRL MED 1 2313 Station 9, Vaud, 1025, Switzerland
| | - Neil Chennoufi
- School of Engineering, Ecole Polytechnique Fédérale de Lausanne, EPFL STI IGM RRL MED 1 2313 Station 9, Vaud, 1025, Switzerland
| | - Sagar Joshi
- School of Engineering, Ecole Polytechnique Fédérale de Lausanne, EPFL STI IGM RRL MED 1 2313 Station 9, Vaud, 1025, Switzerland
| | - Rebecca Kramer-Bottiglio
- School of Engineering & Applied Science, Yale University, 9 Hillhouse Avenue, New Haven, CT, 06520, USA
| | - Jamie Paik
- School of Engineering, Ecole Polytechnique Fédérale de Lausanne, EPFL STI IGM RRL MED 1 2313 Station 9, Vaud, 1025, Switzerland.
| |
Collapse
|
3
|
Smart textiles using fluid-driven artificial muscle fibers. Sci Rep 2022; 12:11067. [PMID: 35773415 PMCID: PMC9247081 DOI: 10.1038/s41598-022-15369-2] [Citation(s) in RCA: 8] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/06/2022] [Accepted: 06/22/2022] [Indexed: 12/01/2022] Open
Abstract
The marriage of textiles with artificial muscles to create smart textiles is attracting great attention from the scientific community and industry. Smart textiles offer many benefits including adaptive comfort and high conformity to objects while providing active actuation for desired motion and force. This paper introduces a new class of programmable smart textiles created from different methods of knitting, weaving, and sticking fluid-driven artificial muscle fibers. Mathematical models are developed to describe the elongation-force relationship of the knitting and weaving textile sheets, followed by experiments to validate the model effectiveness. The new smart textiles are highly flexible, conformable, and mechanically programmable, enabling multimodal motions and shape-shifting abilities for use in broader applications. Different prototypes of the smart textiles are created with experimental validations including various shape-changing instances such as elongation (up to 65%), area expansion (108%), radial expansion (25%), and bending motion. The concept of reconfiguring passive conventional fabrics into active structures for bio-inspired shape-morphing structures is also explored. The proposed smart textiles are expected to contribute to the progression of smart wearable devices, haptic systems, bio-inspired soft robotics, and wearable electronics.
Collapse
|
4
|
Shah D, Yang B, Kriegman S, Levin M, Bongard J, Kramer-Bottiglio R. Shape Changing Robots: Bioinspiration, Simulation, and Physical Realization. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2021; 33:e2002882. [PMID: 32954582 DOI: 10.1002/adma.202002882] [Citation(s) in RCA: 26] [Impact Index Per Article: 8.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/28/2020] [Revised: 06/01/2020] [Accepted: 06/08/2020] [Indexed: 06/11/2023]
Abstract
One of the key differentiators between biological and artificial systems is the dynamic plasticity of living tissues, enabling adaptation to different environmental conditions, tasks, or damage by reconfiguring physical structure and behavioral control policies. Lack of dynamic plasticity is a significant limitation for artificial systems that must robustly operate in the natural world. Recently, researchers have begun to leverage insights from regenerating and metamorphosing organisms, designing robots capable of editing their own structure to more efficiently perform tasks under changing demands and creating new algorithms to control these changing anatomies. Here, an overview of the literature related to robots that change shape to enhance and expand their functionality is presented. Related grand challenges, including shape sensing, finding, and changing, which rely on innovations in multifunctional materials, distributed actuation and sensing, and somatic control to enable next-generation shape changing robots are also discussed.
Collapse
Affiliation(s)
- Dylan Shah
- School of Engineering & Applied Science, Yale University, 9 Hillhouse Avenue, New Haven, CT, 06511, USA
| | - Bilige Yang
- School of Engineering & Applied Science, Yale University, 9 Hillhouse Avenue, New Haven, CT, 06511, USA
| | - Sam Kriegman
- Department of Computer Science, University of Vermont, E428 Innovation Hall, Burlington, VT, 05405, USA
| | - Michael Levin
- Department of Biology, Allen Discovery Center at Tufts University, Tufts University, 200 Boston Ave. Suite 4604, Medford, MA, 02155, USA
- Wyss Institute for Biologically Inspired Engineering, Harvard University, 3 Blackfan Cir, Boston, MA, 02115, USA
| | - Josh Bongard
- Department of Computer Science, University of Vermont, E428 Innovation Hall, Burlington, VT, 05405, USA
| | - Rebecca Kramer-Bottiglio
- School of Engineering & Applied Science, Yale University, 9 Hillhouse Avenue, New Haven, CT, 06511, USA
| |
Collapse
|
5
|
Xiong J, Chen J, Lee PS. Functional Fibers and Fabrics for Soft Robotics, Wearables, and Human-Robot Interface. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2021; 33:e2002640. [PMID: 33025662 DOI: 10.1002/adma.202002640] [Citation(s) in RCA: 126] [Impact Index Per Article: 42.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/18/2020] [Revised: 05/25/2020] [Indexed: 05/24/2023]
Abstract
Soft robotics inspired by the movement of living organisms, with excellent adaptability and accuracy for accomplishing tasks, are highly desirable for efficient operations and safe interactions with human. With the emerging wearable electronics, higher tactility and skin affinity are pursued for safe and user-friendly human-robot interactions. Fabrics interlocked by fibers perform traditional static functions such as warming, protection, and fashion. Recently, dynamic fibers and fabrics are favorable to deliver active stimulus responses such as sensing and actuating abilities for soft-robots and wearables. First, the responsive mechanisms of fiber/fabric actuators and their performances under various external stimuli are reviewed. Fiber/yarn-based artificial muscles for soft-robots manipulation and assistance in human motion are discussed, as well as smart clothes for improving human perception. Second, the geometric designs, fabrications, mechanisms, and functions of fibers/fabrics for sensing and energy harvesting from the human body and environments are summarized. Effective integration between the electronic components with garments, human skin, and living organisms is illustrated, presenting multifunctional platforms with self-powered potential for human-robot interactions and biomedicine. Lastly, the relationships between robotic/wearable fibers/fabrics and the external stimuli, together with the challenges and possible routes for revolutionizing the robotic fibers/fabrics and wearables in this new era are proposed.
Collapse
Affiliation(s)
- Jiaqing Xiong
- School of Materials Science and Engineering, Nanyang Technological University, Singapore, 639798, Singapore
| | - Jian Chen
- School of Materials Science and Engineering, Nanyang Technological University, Singapore, 639798, Singapore
| | - Pooi See Lee
- School of Materials Science and Engineering, Nanyang Technological University, Singapore, 639798, Singapore
| |
Collapse
|
6
|
Stalin T, Jain S, Thanigaivel NK, Teoh JEM, Raj PMA, Alvarado PVY. Automated Fiber Embedding for Soft Mechatronic Components. IEEE Robot Autom Lett 2021. [DOI: 10.1109/lra.2021.3067244] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/01/2023]
|
7
|
Characterisation and Control of a Woven Biomimetic Actuator for Wearable Neurorehabilitative Devices. ACTUATORS 2021. [DOI: 10.3390/act10020037] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
Abstract
Twisted coiled actuators (TCAs) are a type of soft actuator made from polymer fibres such as nylon sewing thread. As they provide motion in a compact, lightweight, and flexible package, they provide a solution to the actuation of wearable mechatronic devices for motion assistance. Their limitation is that they provide low total force, requiring them to actuate in parallel with multiple units. Previous literature has shown that the force and stroke production can be improved by incorporating them into fabric meshes. A fabric mesh could also improve the contraction efficiency, strain rate, and user comfort. Therefore, this study focused on measuring these performance metrics for a set of TCAs embedded into a woven fabric mesh. The experimental results show that the stroke of the actuators scaled linearly with the number of activated TCAs, achieving a maximum applied force of 11.28 N, a maximum stroke of 12.23%, and an efficiency of 1.8%. Additionally, two control methods were developed and evaluated, resulting in low overshoot and steady-state error. These results indicate that the designed actuators are viable for use in wearable mechatronic devices, since they can scale to meet different requirements, while being able to be accurately controlled with minimal additional components.
Collapse
|
8
|
Eschen K, Granberry R, Holschuh B, Abel J. Amplifying and Leveraging Generated Force Upon Heating and Cooling in SMA Knitted Actuators. ACS APPLIED MATERIALS & INTERFACES 2020; 12:54155-54167. [PMID: 33201679 DOI: 10.1021/acsami.0c14206] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
This work reexamines traditional shape memory alloy (SMA) loading paths commonly used in SMA-based actuator applications and presents a novel, superimposed condition in which SMA generates substantial forces upon heating and cooling. This atypical effect, which is investigated with a textile-based actuator, was found to be prominent at the completion of material phase transformation, at which point thermal expansion/contraction became the dominant force-generating mechanism. We demonstrate that amplification of generated forces can be accomplished by varying the applied thermal load, applied structural strain, as well as actuator architecture. Specifically, we present SMA knitted actuators as an actuator architecture that increases the effect by aggregating SMA wires within a complex strain profile-effectively providing a larger operational window for the effect to propagate. The amplification of blocking forces through this novel operational procedure suggests reconsidering traditional blocking force design paradigms and opens untapped actuator application spaces, such as the highlighted medical and aerospace wearable technologies.
Collapse
Affiliation(s)
- Kevin Eschen
- Department of Mechanical Engineering, University of Minnesota, Minneapolis, Minnesota 55455, United States
| | - Rachael Granberry
- College of Design, University of Minnesota, St. Paul, Minnesota 55108, United States
| | - Bradley Holschuh
- College of Design, University of Minnesota, St. Paul, Minnesota 55108, United States
| | - Julianna Abel
- Department of Mechanical Engineering, University of Minnesota, Minneapolis, Minnesota 55455, United States
| |
Collapse
|
9
|
Brancadoro M, Manti M, Tognarelli S, Cianchetti M. Fiber Jamming Transition as a Stiffening Mechanism for Soft Robotics. Soft Robot 2020; 7:663-674. [DOI: 10.1089/soro.2019.0034] [Citation(s) in RCA: 17] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/29/2022] Open
Affiliation(s)
- Margherita Brancadoro
- Scuola Superiore Sant'Anna, The BioRobotics Institute, Pisa, Italy
- Scuola Superiore Sant'Anna, Department of Excellence in Robotics & AI, Pisa, Italy
| | - Mariangela Manti
- Scuola Superiore Sant'Anna, The BioRobotics Institute, Pisa, Italy
- Scuola Superiore Sant'Anna, Department of Excellence in Robotics & AI, Pisa, Italy
| | - Selene Tognarelli
- Scuola Superiore Sant'Anna, The BioRobotics Institute, Pisa, Italy
- Scuola Superiore Sant'Anna, Department of Excellence in Robotics & AI, Pisa, Italy
| | - Matteo Cianchetti
- Scuola Superiore Sant'Anna, The BioRobotics Institute, Pisa, Italy
- Scuola Superiore Sant'Anna, Department of Excellence in Robotics & AI, Pisa, Italy
| |
Collapse
|
10
|
Alcântara CCJ, Landers FC, Kim S, De Marco C, Ahmed D, Nelson BJ, Pané S. Mechanically interlocked 3D multi-material micromachines. Nat Commun 2020; 11:5957. [PMID: 33235190 PMCID: PMC7686494 DOI: 10.1038/s41467-020-19725-6] [Citation(s) in RCA: 27] [Impact Index Per Article: 6.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/15/2019] [Accepted: 10/28/2020] [Indexed: 11/26/2022] Open
Abstract
Metals and polymers are dissimilar materials in terms of their physicochemical properties, but complementary in terms of functionality. As a result, metal-organic structures can introduce a wealth of novel applications in small-scale robotics. However, current fabrication techniques are unable to process three-dimensional metallic and polymeric components. Here, we show that hybrid microstructures can be interlocked by combining 3D lithography, mold casting, and electrodeposition. Our method can be used to achieve complex multi-material microdevices with unprecedented resolution and topological complexity. We show that metallic components can be combined with structures made of different classes of polymers. Properties of both metals and polymers can be exploited in parallel, resulting in structures with high magnetic responsiveness, elevated drug loading capacity, on-demand shape transformation, and elastic behavior. We showcase the advantages of our approach by demonstrating new microrobotic locomotion modes and controlled agglomeration of swarms.
Collapse
Affiliation(s)
- C C J Alcântara
- Institute of Robotics and Intelligent Systems, ETH Zurich, Zurich, Switzerland.
| | - F C Landers
- Institute of Robotics and Intelligent Systems, ETH Zurich, Zurich, Switzerland
| | - S Kim
- Institute of Robotics and Intelligent Systems, ETH Zurich, Zurich, Switzerland
| | - C De Marco
- Institute of Robotics and Intelligent Systems, ETH Zurich, Zurich, Switzerland.
| | - D Ahmed
- Institute of Robotics and Intelligent Systems, ETH Zurich, Zurich, Switzerland
| | - B J Nelson
- Institute of Robotics and Intelligent Systems, ETH Zurich, Zurich, Switzerland
| | - S Pané
- Institute of Robotics and Intelligent Systems, ETH Zurich, Zurich, Switzerland.
| |
Collapse
|
11
|
Abstract
Fabrics are ubiquitous materials that have conventionally been passive assemblies of interlacing, inactive fibers. However, the recent emergence of active fibers with actuation, sensing, and structural capabilities provides the opportunity to impart robotic function into fabric substrates. Here we present an implementation of robotic fabrics by integrating functional fibers into conventional fabrics using typical textile manufacturing techniques. We introduce a set of actuating and variable-stiffness fibers, as well as printable in-fabric sensors, which allows for robotic closed-loop control of everyday fabrics while remaining lightweight and maintaining breathability. Finally, we demonstrate the utility of robotic fabrics through their application to an active wearable tourniquet, a transforming and load-bearing deployable structure, and an untethered, self-stowing airfoil.
Collapse
|
12
|
Zhu S, Hu J. Multi-Modal Contractive Forces of Wools as Actuator. Polymers (Basel) 2020; 12:polym12071464. [PMID: 32629857 PMCID: PMC7408587 DOI: 10.3390/polym12071464] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/16/2020] [Revised: 05/19/2020] [Accepted: 05/22/2020] [Indexed: 11/16/2022] Open
Abstract
Wool has a long history of use in textiles throughout human civilization. Many smart functions such as reversible shape changes to various stimuli have been demonstrated in the last few years. However, the force-related characteristics are still imperfectly recognized, although they are expected to be used as actuators due to their biological origins and broad applications. Herein, we investigated the feasibility of wools in performing actuating ability through its intrinsic structures and fabrication methods. The diverse modes of contractive forces were obtained in wool materials including platform-like, double-peak, and slope-like shapes, where a molecular model was also presented to trace the origins of stress evolution. After that, a polymeric blend was created to modify the wool materials and a dissimilar performance of stress production was achieved, a square stress mode with stable manner and maintenance, for broad applications in a more efficient way. It is believed that these actuating properties extracted from natural hairs have a large potential in current smart applications and lay down new inspiration in designing actuators.
Collapse
Affiliation(s)
- Shanshan Zhu
- Institute of Advanced Integration Technology, Shenzhen Institutes of Advanced Technology, Chinese Academy of Sciences, Shenzhen 518055, China;
| | - Jinlian Hu
- Department of Biomedical Engineering, City University of Hong Kong, Kowloon, Hong Kong 999077, China
- Correspondence: ; Tel.: +852-3442-9549
| |
Collapse
|
13
|
Zhu M, Do TN, Hawkes E, Visell Y. Fluidic Fabric Muscle Sheets for Wearable and Soft Robotics. Soft Robot 2020; 7:179-197. [PMID: 31905325 DOI: 10.1089/soro.2019.0033] [Citation(s) in RCA: 35] [Impact Index Per Article: 8.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/13/2022] Open
Abstract
Conformable robotic systems are attractive for applications in which they may actuate structures with large surface areas, provide forces through wearable garments, or enable autonomous robotic systems. We present a new family of soft actuators that we refer to as Fluidic Fabric Muscle Sheets (FFMS). They are composite fabric structures that integrate fluidic transmissions based on arrays of elastic tubes. These sheet-like actuators can strain, squeeze, bend, and conform to hard or soft objects of arbitrary shapes or sizes, including the human body. We show how to design and fabricate FFMS actuators via facile apparel engineering methods, including computerized sewing techniques that determine the stress and strain distributions that can be generated. We present a simple mathematical model that proves effective for predicting their performance. FFMS can operate at frequencies of 5 Hz or more, achieve engineering strains exceeding 100%, and exert forces >115 times their weight. They can be safely used in intimate contact with the human body even when delivering stresses exceeding 106 Pascals. We demonstrate their versatility for actuating a variety of bodies or structures, and in configurations that perform multiaxis actuation, including bending and shape change. As we also show, FFMS can be used to exert forces on body tissues for wearable and biomedical applications. We demonstrate several potential use cases, including a miniature steerable robot, a glove for grasp assistance, garments for applying compression to the extremities, and devices for actuating small body regions or tissues via localized skin stretch.
Collapse
Affiliation(s)
- Mengjia Zhu
- Media Arts and Technology Program, Department of Electrical and Computer Engineering, California NanoSystems Institute, and Center for Polymers and Organic Solids, University of California, Santa Barbara, Santa Barbara, California
| | - Thanh Nho Do
- Graduate School of Biomedical Engineering, Faculty of Engineering, University of New South Wales, Sydney, Australia
| | - Elliot Hawkes
- Department of Mechanical Engineering, University of California, Santa Barbara, Santa Barbara, California
| | - Yon Visell
- Media Arts and Technology Program, Department of Electrical and Computer Engineering, California NanoSystems Institute, and Center for Polymers and Organic Solids, University of California, Santa Barbara, Santa Barbara, California.,Department of Mechanical Engineering, University of California, Santa Barbara, Santa Barbara, California
| |
Collapse
|
14
|
Granberry RM, Padula S, Eschen K, Abel J, Holschuh B. Design and Control of Reduced Power Actuation for Active-Contracting Orthostatic Intolerance Garments. INTERNATIONAL CONFERENCE ON ENVIRONMENTAL SYSTEMS. AMERICAN INSTITUTE OF AERONAUTICS AND ASTRONAUTICS 2019; 49:ICES-2019-44. [PMID: 32572398 PMCID: PMC7307007] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
Active-contracting fabrics are an emerging innovation that could revolutionize aerospace compression garment technology, notably orthostatic intolerance garments (OIG), by contracting on demand. Prior research has found that active-contracting fabrics, specifically weft knit garter fabric architectures constructed with shape memory alloy (SMA) filaments, can apply 2-54 mmHg on the body (single-layer construction) or 4-104 mmHg (double layer construction), depending on body radius. Prior garment prototyping and performance validation efforts have been conducted with commercially available Flexinol® wire with an actuation finish temperature of 90°C, a temperature that is not appropriate proximal to the human body. While other chemistries of SMA having lower actuation temperatures used for medical devices inside the human body (Tcore ≈ 37°C) are commonly available, SMA has not been optimized for actuation control against the human skin (TS ≈ 31°C). This research characterizes and validates a novel SMA material designed by Fort Wayne Metals specifically for actuation adjacent to the surface of the body. Through experimental temperature-force-displacement testing on both Dynalloy Flexinol® and Fort Wayne Metals straight SMA wire and SMA knitted actuator configurations, we present data that suggests (1) performance differences between low-temperature, nickel-rich SMA (Fort Wayne Metals) and high-temperature, titanium-rich SMA (Dynalloy Flexinol®) are negated by certain SMA knitted actuator structures, and (2) certain SMA knitted actuator configurations increase in force upon cool down, offering new concepts for SMA system actuation/control that minimize power consumption and waste heat. This manuscript presents experimental evidence for a future OIG that is donned in an oversized and compliant state, heated momentarily above ambient skin temperature to initiate actuation, and remain fully 'activated' once the actuation is complete upon equilibration with skin temperature. The result is an OIG that requires low-operating power that could be doffed through zipper releases and placed in a sub-zero chamber to return the structure to the 'off' state for reuse.
Collapse
Affiliation(s)
- Rachael M Granberry
- University of Minnesota, Department of Design, Housing, and Apparel, Saint Paul, MN, 55108
| | - Santo Padula
- NASA Glenn Research Center, Cleveland, OH, 44135
| | - Kevin Eschen
- University of Minnesota, Department of Mechanical Engineering, Minneapolis, MN, 55455
| | - Julianna Abel
- University of Minnesota, Department of Mechanical Engineering, Minneapolis, MN, 55455
| | - Brad Holschuh
- University of Minnesota, Department of Design, Housing, and Apparel, Saint Paul, MN, 55108
| |
Collapse
|