Modulation of integrin expression on rat bone marrow cells by substrates with different surface characteristics

Into the Tissues: Extracellular Matrix and Its Artificial Substitutes: Cell Signalling Mechanisms

The existence of orderly structures, such as tissues and organs is made possible by cell adhesion, i.e., the process by which cells attach to neighbouring cells and a supporting substance in the form of the extracellular matrix. The extracellular matrix is a three-dimensional structure composed of collagens, elastin, and various proteoglycans and glycoproteins. It is a storehouse for multiple signalling factors. Cells are informed of their correct connection to the matrix via receptors. Tissue disruption often prevents the natural reconstitution of the matrix. The use of appropriate implants is then required. This review is a compilation of crucial information on the structural and functional features of the extracellular matrix and the complex mechanisms of cell–cell connectivity. The possibilities of regenerating damaged tissues using an artificial matrix substitute are described, detailing the host response to the implant. An important issue is the surface properties of such an implant and the possibilities of their modification.

Microbially Catalyzed Biomaterials for Bone Regeneration

Bone is a complex mineralized tissue composed of various organic (proteins, cells) and inorganic (hydroxyapatite, calcium carbonate) substances with micro/nanoscale structures. To improve interfacial bioactivity of bone-implanted biomaterials, extensive efforts are being made to fabricate favorable biointerface via surface modification. Inspired by microbially catalyzed mineralization, a novel concept to biologically synthesize the micro/nanostructures on bioceramics, microbial-assisted catalysis, is presented. It involves three processes: bacterial adhesion on biomaterials, production of CO₃ ^2- assisted by bacteria, and nucleation and growth of CaCO₃ nanocrystals on the surface of bioceramics. The microbially catalyzed biominerals exhibit relatively uniform micro/nanostructures on the surface of both 2D and 3D α-CaSiO₃ bioceramics. The topographic and chemical cues of the grown micro/nanostructures present excellent in vitro and in vivo bone-forming bioactivity. The underlying mechanism is closely related to the activation of multiple biological processes associated with bone regeneration. The study offers a microbially catalytic concept and strategy of fabricating micro/nanostructured biomaterials for tissue regeneration.

Mesenchymal stem cell interaction with Ti6Al4V alloy pre-exposed to simulated body fluid

Titanium and its alloys are widely used for substitution of hard tissues, especially in orthopaedic and dental surgery. Despite the benefit of the use of titanium for such applications, there are still questions which must be sorted out. Surface properties are crucial for cell adhesion, proliferation and differentiation. Mainly, micro/nanostructured surfaces positively influence osteogenic differentiation of human mesenchymal stem cells. Ti₆Al₄V is a biocompatible α + β alloy which is widely used in orthopaedics. The aim of this study was to investigate the interaction of the nanostructured and ground Ti₆Al₄V titanium alloys with simulated body fluid complemented by the defined precipitation of hydroxyapatite-like coating and to study the cytotoxicity and differentiation capacity of cells with such a modified titanium alloy. Nanostructures were fabricated using electrochemical oxidation. Human mesenchymal stem cells (hMSC) were used to evaluate cell adhesion, metabolic activity and proliferation on the specimens. The differentiation potential of the samples was investigated using PCR and specific staining of osteogenic markers collagen type I and osteocalcin. Our results demonstrate that both pure Ti₆Al₄V, nanostructured samples, and hydroxyapatite-like coating supported hMSC growth and metabolic activity. Nanostructured samples improved collagen type I synthesis after 14 days, while both nanostructured and hydroxyapatite-like coated samples enhanced collagen synthesis on day 21. Osteocalcin synthesis was the most enhanced by hydroxyapatite-like coating on the nanostructured surfaces. Our results indicate that hydroxyapatite-like coating is a useful tool guiding hMSC osteogenic differentiation.

Titanium and its alloys are widely used for substitution of hard tissues, especially in orthopaedic and dental surgery.

A comprehensive characterisation of large-scale expanded human bone marrow and umbilical cord mesenchymal stem cells

BACKGROUND

The manufacture of mesenchymal stem/stromal cells (MSCs) for clinical use needs to be cost effective, safe and scaled up. Current methods of expansion on tissue culture plastic are labour-intensive and involve several 'open' procedures. We have used the closed Quantum® hollow fibre bioreactor to expand four cultures each of MSCs derived from bone marrow (BM) and, for the first time, umbilical cords (UCs) and assessed extensive characterisation profiles for each, compared to parallel cultures grown on tissue culture plastic.

METHODS

Bone marrow aspirate was directly loaded into the Quantum®, and cells were harvested and characterised at passage (P) 0. Bone marrow cells were re-seeded into the Quantum®, harvested and further characterised at P1. UC-MSCs were isolated enzymatically and cultured once on tissue culture plastic, before loading cells into the Quantum®, harvesting and characterising at P1. Quantum®-derived cultures were phenotyped in terms of immunoprofile, tri-lineage differentiation, response to inflammatory stimulus and telomere length, as were parallel cultures expanded on tissue culture plastic.

RESULTS

Bone marrow cell harvests from the Quantum® were 23.1 ± 16.2 × 10⁶ in 14 ± 2 days (P0) and 131 ± 84 × 10⁶ BM-MSCs in 13 ± 1 days (P1), whereas UC-MSC harvests from the Quantum® were 168 ± 52 × 10⁶ UC-MSCs after 7 ± 2 days (P1). Quantum®- and tissue culture plastic-expanded cultures at P1 adhered to criteria for MSCs in terms of cell surface markers, multipotency and plastic adherence, whereas the integrins, CD29, CD49c and CD51/61, were found to be elevated on Quantum®-expanded BM-MSCs. Rapid culture expansion in the Quantum® did not cause shortened telomeres when compared to cultures on tissue culture plastic. Immunomodulatory gene expression was variable between donors but showed that all MSCs upregulated indoleamine 2, 3-dioxygenase (IDO).

CONCLUSIONS

The results presented here demonstrate that the Quantum® can be used to expand large numbers of MSCs from bone marrow and umbilical cord tissues for next-generation large-scale manufacturing, without impacting on many of the properties that are characteristic of MSCs or potentially therapeutic. Using the Quantum®, we can obtain multiple MSC doses from a single manufacturing run to treat many patients. Together, our findings support the development of cheaper cell-based treatments.

The role of the micro-pattern and nano-topography of hydroxyapatite bioceramics on stimulating osteogenic differentiation of mesenchymal stem cells

The micro/nano hybrid structure is considered to be a biomaterial characteristic to stimulate osteogenesis by mimicking the three-dimensional structure of the bone matrix. However, the mechanism of the hybrid structure induced osteogenic differentiation of stem cells is still unknown. For elucidating the mechanisms, one of the challenge is to directly fabricate micro/nano hybrid structure on bioceramics because of its brittleness. In this study, hydroxyapatite (HA) bioceramics with the micro/nano hybrid structure were firstly fabricated via a hydrothermal treatment and template method, and the effect of the different surface structures on the expression of integrins, BMP2 signaling pathways and cell-cell communication was investigated. Interestingly, the results suggested that the osteogenic differentiation induced by micro/nano structures was modulated first through activating integrins and then further activating BMP2 signaling pathway and cell-cell communication, while activated BMP2 could in turn activate integrins and Cx43-related cell-cell communication. Furthermore, differences in activation of integrins, BMP2 signaling pathway, and gap junction-mediated cell-cell communication were observed, in which nanorod and micropattern structures activated different integrin subunits, BMP downstream receptors and Cx43. This finding may explain the synergistic effect of the micro/nano hybrid structure on the activation of osteogenic differentiation of BMSCs. Based on our study, we concluded that the different activation mechanisms of micro- and nano-structures led to the synergistic stimulatory effect on integrin activation and osteogenesis, in which not only the direct contact of cells on micro/nano structure played an important role, but also other surface characteristics such as protein adsorption might contribute to the bioactive effect.

STATEMENT OF SIGNIFICANCE

The micro/nano hybrid structure has been found to have synergistic bioactivity on osteogenesis. However, it is still a challenge to fabricate the hybrid structure directly on the bioceramics, and the role of micro- and nano-structure, in particular the mechanism of the micro/nano-hybrid structure induced stem cell differentiation is still unknown. In this study, we firstly fabricated hydroxyapatite bioceramics with the micro/nano hybrid structure, and then investigated the effect of different surface structure on expression of integrins, BMP2 signaling pathways and cell-cell communication. Interestingly, we found that the osteogenic differentiation induced by structure was modulated first through activating integrins and then further activating BMP2 signaling pathway and cell-cell communication, and activated BMP2 could in turn activate some integrin subunits and Cx43-related cell-cell communication. Furthermore, differences in activation of integrins, BMP2 signaling pathway, and gap junction-mediated cell-cell communication were observed, in which nanorod and micropattern structures activated different integrin subunits, BMP downstream receptors and Cx43. This finding may explain the synergistic effect of the micro/nano hybrid structure on the activation of osteogenic differentiation of BMSCs. Based on our study, we concluded that the different activation mechanisms of micro- and nano-structures led to the synergistic stimulatory effect on integrin activation and osteogenesis, in which not only the direct contact of cells on micro/nano structure played an important role, but also other surface characteristics such as protein adsorption might contribute to the bioactive effect.

Role of subnano-, nano- and submicron-surface features on osteoblast differentiation of bone marrow mesenchymal stem cells

Subnano, nano and sub-micron surface features can selectively activate integrin receptors and induce osteoblast differentiation of bone marrow mesenchymal stem cells. Although it is widely accepted that nanoscale titanium surface roughness may promote differentiation of various osteoblast lineages, there has been no clear report on the threshold dimension of surface features and the optimized dimensions of surface features for triggering integrin activation and stem cell differentiation. This study systematically controlled titanium surface features from the sub-nano to sub-micron scales and investigated the corresponding effects on stem cell responses, such as integrin activation, cyclins, key transcriptional genes of osteoblast differentiation and osteoblastic phenotype genes. Surface features with sub-nano surface dimensions were insufficient to increase integrin activation compared to pure nanoscale titanium surface features. Although both pure nanoscale and nano-submicron hybrid scales of titanium surface features were sufficient for activating integrin-ligand proteins interactions through the α integrin subunits, only nano-submicron hybrid titanium surface features significantly accelerated subsequent osteoblast differentiation of primary mouse bone marrow stromal cells after 2 weeks. In addition, live cell analysis of human bone marrow mesenchymal stem cells on transparent titanium demonstrated rapid cytoskeletal re-organization on the nanoscale surface features, which ultimately induced higher expression of osteoblast phenotype genes after 3 weeks.

Effect of blasting treatment and Fn coating on MG63 adhesion and differentiation on titanium: a gene expression study using real-time RT-PCR

Biomaterial surface properties, via alterations in the adsorbed protein layer, and the presence of specific functional groups can influence integrin binding specificity, thereby modulating cell adhesion and differentiation processes. The adsorption of fibronectin, a protein directly involved in osteoblast adhesion to the extracellular matrix, has been related to different physical and chemical properties of biomaterial surfaces. This study used blasting particles of different sizes and chemical compositions to evaluate the response of MG63 osteoblast-like cells on smooth and blasted titanium surfaces, with and without fibronectin coatings, by means of real-time reverse transcription-polymerase chain reaction (qRT-PCR) assays. This response included (a) expression of the α(5), α(v) and α(3) integrin subunits, which can bind to fibronectin through the RGD binding site, and (b) expression of alkaline phosphatase (ALP) and osteocalcin (OC) as cell-differentiation markers. ALP activity and synthesis of OC were also tested. Cells on SiC-blasted Ti surfaces expressed higher amounts of the α(5) mRNA gene than cells on Al(2)O(3)-blasted Ti surfaces. This may be related to the fact that SiC-blasted surfaces adsorbed higher amounts of fibronectin due to their higher surface free energy and therefore provided a higher number of specific cell-binding sites. Fn-coated Ti surfaces decreased α(5) mRNA gene expression, by favoring the formation of other integrins involved in adhesion over α(5)β(1). The changes in α(5) mRNA expression induced by the presence of fibronectin coatings may moreover influence the osteoblast differentiation pathway, as fibronectin coatings on Ti surfaces also decreased both ALP mRNA expression and ALP activity after 14 and 21 days of cell culture.

Alterations in gene expression of human vascular endothelial cells associated with nanotopographic cues

Human cells in vivo are exposed to a topographically rich, 3-dimenisional environment which provides extracellular cues initiating a cascade of biochemical signals resulting in changes in cell behavior. One primary focus of our group is the development of biomimetic substrates with anisotropic nanoscale topography to elucidate the mechanisms by which physical surface cues are translated into biochemical signals. To investigate changes in gene expression as a result of nanotopographic cues, Human Umbilical Vein Endothelial Cells (HUVECs) were cultured on chemically identical flat and 400 nm pitch nanogrooved surfaces. After 12 h, RNA was harvested for an Affymetrix HG U133 Plus 2.0 gene array. Of over 47,000 possible gene probes, 3171 had at least a two-fold difference in expression between the control flat and 400 nm pitch. The gene ontology groups with the most significant increase in expression are involved in protein modification and maintenance, similar to cells upregulating chaperone and protein synthesis genes in response to physical stresses. The most significant decreases in expression were observed with cell cycle proteins, including cyclins and checkpoint proteins. Extracellular matrix proteins, including integrins, collagens, and laminins, are almost uniformly downregulated on the 400 nm pitch surfaces compared to control. The downregulation of one of these genes, integrin beta 1, was confirmed via quantitative PCR. Together, these gene array data, in addition to our studies of cell behavior on nanoscale surfaces, contribute to our understanding of the signaling pathways modulated by topographical surface cues.

Osteoblast mechanoresponses on Ti with different surface topographies

During implant healing, mechanical force is transmitted to osteogenic cells via implant surfaces with various topographies. This study tested a hypothesis that osteoblasts respond to mechanical stimulation differently on titanium with different surface topographies. Rat bone-marrow-derived osteoblastic cells were cultured on titanium disks with machined or acid-etched surfaces. A loading session consisted of a 3-minute application of a 10- or 20-mum-amplitude vibration. Alkaline phosphatase activity and gene expression increased only when the cells were loaded in 3 sessions/day on machined surfaces, regardless of the vibration amplitude, whereas they were increased with 1 loading session/day on the acid-etched surface. The loading did not affect the osteoblast proliferation on either surface, but selectively enhanced the cell spreading on the machined surface. Analysis of the data suggests that osteoblastic differentiation is promoted by mechanical stimulation on titanium, and that the promotion is disproportionate, depending on the titanium surface topography. The frequency of mechanical stimulation, rather than its amplitude, seemed to have a key role.

Patterns of some extracellular matrix gene expression are similar in cells from cleft lip-palate patients and in human palatal fibroblasts exposed to diazepam in culture

Prenatal exposure to diazepam, a prototype sedative drug that belongs to Benzodiazepines, can lead to orofacial clefting in human newborns. By using real-time PCR, in the present study we investigated whether diazepam elicits gene expression alterations in extracellular matrix (ECM) components, growth factors and gamma-aminobutyric acid receptor (GABRB3), implicated in the coordinate regulation of palate development. Palate fibroblasts were treated with diazepam (Dz-N fibroblasts) and compared to cleft lip-palate (CLP) fibroblasts obtained from patients with no known exposure to diazepam or other teratogens. Untreated fibroblasts from non-CLP patients were used as control. The results showed significant convergences in gene expression pattern of collagens, fibromodulin, vitronectin, tenascin C, integrins and metalloprotease MMP13 between Dz-N and CLP fibroblasts. Among the growth factors, constitutive Fibroblast Growth Factor 2 (FGF2) was greatly enhanced in Dz-N and CLP fibroblasts and associated with a higher reduction of FGF receptor. Transforming Growth Factor beta 3 (TGFbeta(3)) resulted up-regulated in CLP fibroblasts and decreased in Dz-N fibroblasts. We found phenotypic differences exhibited by Dz-N and CLP fibroblasts in GABRB3 gene regulation, so further studies are necessary to determine whether GABAergic system could be involved in the development of diazepam mediated CLP phenotype. Taken together the results elucidate the molecular mechanisms underlying possible toxicology effects induced by diazepam. Counselling of women on the safety of diazepam exposure is clinically important, also for the forensic consequences.

Integrin alpha2beta1 plays a critical role in osteoblast response to micron-scale surface structure and surface energy of titanium substrates

Efforts to improve bone response to biomaterials have focused on ligands that bind alpha5beta1 integrins. However, antibodies to alpha5beta1 reduce osteoblast proliferation but do not affect differentiation when cells are grown on titanium (Ti). beta1-silencing blocks the differentiation stimulus of Ti microtopography, suggesting that other beta1 partners are important. Stably alpha2-silenced MG63 human osteoblast-like cells were used to test whether alpha2beta1 specifically mediates osteoblast response to Ti surface micron-scale structure and energy. WT and alpha2-silenced MG63 cells were cultured on tissue culture polystyrene (TCPS) and Ti disks with different surface microtopographies: machined pretreatment (PT) surfaces [mean peak to valley roughness (R(a)) < 0.02 microm], PT surfaces that were grit-blasted and acid-etched (SLA; R(a) = 4 microm), and SLA with high surface energy (modSLA). Alkaline phosphatase (ALP), alpha2 and beta1 mRNA, but not alpha5, alpha v, beta3, type-I collagen, or osteocalcin, increased on SLA and modSLA at 6 days. Alpha2 increased at 8 days on TCPS and PT, but remained unchanged on SLA and modSLA. Alpha2-protein was reduced 70% in alpha2-siRNA cells, whereas alpha5-mRNA and protein were unaffected. Alpha2-knockdown blocked surface-dependent increases in beta1 and osteocalcin and decreases in cell number and increases in ALP and local factors typical of MG63 cells grown on SLA and modSLA [e.g., prostaglandin E(2), osteoprotegerin, latent and active TGF-beta1, and stimulatory effects of 1alpha,25(OH)(2)D(3) on these parameters]. This finding indicates that alpha2beta1 signaling is required for osteoblastic differentiation caused by Ti microstructure and surface energy, suggesting that conclusions based on cell behavior on TCPS are not predictive of behavior on other substrates or the mechanisms involved.

The behavior of osteoblast-like cells on various substrates with functional blocking of integrin-beta1 and integrin-beta3

This study was designed to examine the influence of integrin subunit-beta1 and subunit-beta3 on the behavior of primary osteoblast-like cells, cultured on calcium phosphate (CaP)-coated and non coated titanium (Ti). Osteoblast-like cells were incubated with specific monoclonal antibodies against integrin-beta1 and integrin-beta3 to block the integrin function. Subsequently, cells were seeded on Ti discs, either non coated or provided with a 2 microm carbonated hydroxyapatite coating using Electrostatic Spray Deposition. Results showed that on CaP coatings, cellular attachment was decreased after a pre-treatment with either anti-integrin-beta1 or anti-integrin-beta3 antibodies. On Ti, cell adhesion was only slightly affected after a pre-treatment with anti-integrin-beta3 antibodies. Scanning electron microscopy showed that on both types of substrate, cellular morphology was not changed after a pre-treatment with either antibody. With quantitative PCR, it was shown for both substrates that mRNA expression of integrin-beta1 was increased after a pre-treatment with either anti-integrin-beta1 or anti-integrin-beta3 antibodies. Furthermore, after a pre-treatment with either antibody, mRNA expression of integrin-beta3 and ALP was decreased, on both types of substrate. In conclusion, osteoblast-like cells have the ability to compensate to great extent for the blocking strategy as applied here. Still, integrin-beta1 and beta3 seem to play different roles in attachment, proliferation, and differentiation of osteoblast-like cells, and responses on CaP-coated substrates differ to non coated Ti. Furthermore, the influence on ALP expression suggests involvement of both integrin subunits in signal transduction for cellular differentiation.

Enrichment of osteogenic cell populations from rat bone marrow stroma

The presence of multiple cell types in bone marrow and their varying proportions from isolation to isolation may count for the considerable variation in the outcome of different experiments. The presence of these multiple subpopulations suggests a need for a method that can purify the osteogenic component, i.e. osteoprogenitors, from other components. The availabilities of monoclonal antibodies recognizing subpopulations of osteoblasts are providing means for antibody-based methods. The cell surface antigens STRO-1, ALP and HOP-26 were used for cell sorting experiments with fluorescence activated cell sorting (FACS). These cell populations were analyzed on differential gene expression, cell proliferation and differentiation into the osteoblastic lineage. The oligo-microarray results showed that only the ALP positive cell population expressed genes of the extracellular matrix; like different collagens, ECM-1 and matrix protease MMP-14. The real-time polymerase chain reaction (QPCR) results showed that STRO-1 and ALP positive cells had an upregulation in expression of lipoprotein lipase, osteocalcin, and collagen type I. Integrin beta-3 was only upregulated for ALP positive cells, while for these cells downregulation occurred for the genes myosine, alkaline phosphatase and integrin beta-1. HOP-26 positive cells showed an upregulation in collagen type I compared to control group. The DNA analysis revealed that the cells of the control group and the HOP-26 positive cells showed a 5 times higher cell growth compared to the STRO-1 and ALP positive cells. The alkaline phosphatase activity showed no activity for the control group. The STRO-1 and ALP positive cells had a higher activity compared to the HOP-26 positive. The calcium measurements revealed only for the control group calcium at day 24. Based on the results of our study, we conclude that the FACS method had no negative effect on the proliferating as well as differentiating response of the cells. Further, we conclude that by using an antibody-based cell selection method, different cell populations with different mRNA expression profiles and different osteogenic characteristics can be obtained.

Fabrication of 3D hepatic tissues by additive photopatterning of cellular hydrogels

We have fabricated a hepatic tissue construct using a multilayer photopatterning platform for embedding cells in hydrogels of complex architecture. We first explored the potential of established hepatocyte culture models to stabilize isolated hepatocytes for photoencapsulation (e.g., double gel, Matrigel, cocultivation with nonparenchymal cells). Using photopolymerizable PEG hydrogels, we then tailored both the chemistry and architecture of the hydrogels to further support hepatocyte survival and liver-specific function. Specifically, we incorporated adhesive peptides to ligate key integrins on these adhesion-dependent cells. To identify the appropriate peptides for incorporation, the integrin expression of cultured hepatocytes was monitored by flow cytometry and their functional role in cell adhesion was assessed on full-length extracellular matrix (ECM) molecules and their adhesive peptide domains. In addition, we modified the hydrogel architecture to minimize barriers to nutrient transport for these highly metabolic cells. Viability of encapsulated cells was improved in photopatterned hydrogels with structural features of 500 microm in width over unpatterned, bulk hydrogels. Based on these findings, we fabricated a multilayer photopatterned PEG hydrogel structure containing the adhesive RGD peptide sequence to ligate the alpha5beta1 integrin of cocultured hepatocytes. Three-dimensional photopatterned constructs were visualized by digital volumetric imaging and cultured in a continuous flow bioreactor for 12 d where they performed favorably in comparison to unpatterned, unperfused constructs. These studies will have impact in the field of liver biology as well as provide enabling tools for tissue engineering of other organs.

RGD Conjugation to Polyethyleneimine Does Not Improve DNA Delivery to Bone Marrow Stromal Cells

Bone marrow stromal cells (BMSC) modified with therapeutic genes are being actively pursued for gene therapy protocols. To develop safe and effective nonviral methods for BMSC modification, the cationic polymer polyethyleneimine (PEI) has been utilized to condense plasmid DNA for intracellular delivery. This study was conducted to explore the feasibility of increasing the PEI's effectiveness by coupling integrin-binding arginine-glycine-aspartic acid (RGD) peptides to the polymer. BMSC from rats were isolated and expanded in culture for gene transfer studies. In contrast to our expectations, RGD-conjugated PEI did not exhibit an enhanced binding to BMSC. This was the case where the peptides were conjugated to PEI by short, disulfide linkages or long poly(ethylene glycol) linkages. Using a reporter gene for the enhanced green fluorescent protein, the transfection efficiency of RGD-conjugated PEI was also lower than the delivery by the native PEI, which exhibited equivalent transfection efficiency to that of an adenovirus. We conclude that native PEI was sufficient for the transformation of BMSC and that coupling of the integrin-binding RGD-peptides did not improve the effectiveness of this polymer for BMSC transfection.

Effect of fiber diameter on spreading, proliferation, and differentiation of osteoblastic cells on electrospun poly(lactic acid) substrates

Electrospinning is a promising method to construct fused-fiber biomaterial scaffolds for tissue engineering applications, but the efficacy of this approach depends on how substrate topography affects cell function. Previously, it has been shown that linear, parallel raised features with length scales of 0.5-2 microm direct cell orientation through the phenomenon of contact guidance, and enhance phenotypic markers of osteoblastic differentiation. To determine how the linear, random raised features produced by electrospinning affect proliferation and differentiation of osteoprogenitor cells, poly(lactic acid) and poly(ethylene glycol)-poly(lactic acid) diblock copolymers were electrospun with mean fiber diameters of 0.14-2.1 microm onto rigid supports. MC3T3-E1 osteoprogenitor cells cultured on fiber surfaces in the absence of osteogenic factors exhibited a lower cell density after 7 and 14 days of culture than cells cultured on spin-coated surfaces, but cell density increased with fiber diameter. However, in the presence of osteogenic factors (2 mM beta-glycerophosphate, 0.13 mM L-ascorbate-2-phosphate), cell density after 7 and 14 days of culture on fiber surfaces was comparable to or exceeded spin-coated controls, and alkaline phosphatase activity after 14 days was comparable. Examination of cell morphology revealed that cells grown on fibers had smaller projected areas than those on planar surfaces. However, cells attached to electrospun substrates of 2.1 microm diameter fibers exhibited a higher cell aspect ratio than cells on smooth surfaces. These studies show that topographical factors designed into biomaterial scaffolds can regulate spreading, orientation, and proliferation of osteoblastic cells.

Integrins as linker proteins between osteoblasts and bone replacing materials. A critical review

The adhesion of osteoblasts to substrates is mediated through proteins that have adsorbed to the substrate, providing integrins on the cell membrane with ligands to connect to. The integrins regulate cell behavior through bi-directional signaling pathways. This critical review has the purpose to consider the research that has been performed with osteoblasts, integrins, and bone replacing materials. Until now, most research has been done to investigate the integrin expression of osteoblasts in culture during cellular adhesion. However, it remains difficult to draw general conclusions from this research. Nevertheless, it can be concluded that the used substrates and protein or peptide coatings can influence the integrin expression and cellular behavior. Additional research has to be done to fully understand all the parameters involved in integrin expression, the adhesion of cells to substrates, and the subsequent cellular behavior. For this purpose, model substrates are under development. The signaling pathway is receiving more and more attention, but for biomaterial purposes, too little consideration is paid to the translation of the in vitro results to the in vivo situation, and to practical applications.

Patterns of gene expression in rat bone marrow stromal cells cultured on titanium alloy discs of different roughness

Rat bone marrow stromal cells were cultured on either Ra (0.14 microm) or Ra (5.8 microm) Ti6Al4V discs for 24 or 48 h. Cells on the Ra (0.14 microm) surface showed typical fibroblastic morphology, whereas cells on the Ra (5.8 microm) surface were in clusters with a more epithelial appearance. RNA was extracted from the cells at both time points, and gene expression was analyzed by using a rat gene microarray. At 24 and 48 h, a similar number of genes were both up- and down-regulated at least twofold on the Ra (5.8 microm) surface compared to the Ra (0.14 microm) surface. We analyzed the relative level of specific groups of genes related to bone and cartilage development, cell adhesion and extracellular matrix proteins, transcription factors, bone morphogenetic proteins, phospholipases, and protein kinases. Roughness did not appear to be a specific stimulator of osteogenesis because genes of both the bone and cartilage lineage were up-regulated on the Ra (5.8 microm) surface. The most prominent change among transcription factors was up-regulation of Hox 1.4 on the Ra (5.8 microm) surface. Up-regulation of phospholipase A2 and SMAD 4 indicate these genes are also involved in the response of cells to an Ra (5.8 microm) surface. Our data show surface roughness alters the expression of a large number of genes in marrow stromal cells, which are related to multiple pathways of mesenchymal cell differentiation.

The effect of different titanium and hydroxyapatite-coated dental implant surfaces on phenotypic expression of human bone-derived cells

Roughened titanium (Ti) surfaces have been widely used for dental implants. In recent years, there has been the tendency to replace Ti plasma-sprayed surfaces by sandblasted and acid-etched surfaces in order to enhance osseous apposition. Another approach has been the utilization of hydroxyapatite (HA)-coated implants. This study examines the effect of two roughened Ti dental implant surfaces on the osteoblastic phenotype of human bone-derived cells (HBDC) and compares this behavior to that for cells on an HA-coated surface. Test materials were an acid-etched and sandblasted Ti surface (Ti-DPS), a porous Ti plasma-sprayed coating (Ti-TPS), and a plasma-sprayed porous HA coating (HA). Smooth Ti machined surfaces served as control (Ti-ma). HBDC were grown on the substrata for 3, 7, 14, and 21 days, counted and probed for various bone-related mRNAs and proteins (type I collagen, osteocalcin, osteopontin, osteonectin, alkaline phosphatase, and bone sialoprotein). All dental implant surfaces significantly affected cellular growth and the temporal expression of an array of bone-related genes and proteins. HA-coated Ti had the most effect on osteoblastic differentiation inducing a greater expression of an array of osteogenic markers than recorded for cells grown on Ti-DPS and Ti-TPS, thus suggesting that the HA-coated surface may possess a higher potency to enhance osteogenesis. Furthermore, Ti-DPS surfaces induced greater osteoblast proliferation and differentiation than Ti-TPS.

The attachment and growth behavior of osteoblast-like cells on microtextured surfaces

In previous studies, we showed that the application of microgrooves on a surface can direct cellular morphology and the deposition of mineralized matrix of osteoblast-like cells (Biomaterials 20 (1999) 1293; Clin. Oral Impl Res. 11 (2000) 325). In this study, we evaluated the attachment and growth behavior of these cells, using scanning- and transmission electron microscopy (SEM/TEM). Smooth and microgrooved polystyrene substrates were made (groove depth 0.5-1.5 microm, groove- and ridge width 1-10 microm). On these substrates, osteoblast-like cells were cultured for periods up to 16 days. SEM showed that the cells, and their extensions, closely followed the surface on smooth and wider grooved (>5 microm) substrates. In contrast, narrow grooves (<2 microm) were bridged. After 16 days of incubation, the matrix showed extensive deposition of collagen fibrils, and the formation of calcified nodules. With TEM it was shown that on the smooth and wider grooved substrates, focal adhesions were spread throughout the surface. However, on narrow grooves focal adhesions were always positioned on the edges of surface ridges only. Apparently, most extracellular matrix (ECM) was produced by the cells that directly adhered to the substrate. Deposition of ECM was seen in the surface grooves, as well as in between the cell layers. On basis of the current study and previous experiments, we conclude that microgrooves are able to influence bone cell behavior by (1) determining the alignment of cells and cellular extensions, (2) altering the formation and placement of cell focal adhesions, and (3) altering ECM production. Therefore, microgrooved surfaces seem interesting to be applied on bone-anchored implants.

Observations on the effect of BMP-2 on rat bone marrow cells cultured on titanium substrates of different roughness

The objective of this study was to examine the osteoinductive capacity of different concentrations of BMP-2 on bone marrow stromal cells in vitro. Further, we intended to determine whether titanium provided with an increased surface roughness is more efficient in osteoblast differentiation than machined titanium. Therefore, 20,000 cells/ml were seeded and cultured on machined and grit-blasted titanium discs for 4, 8 and 16 days. Different concentrations of rhBMP-2 (0, 10, 100, 1000 ng/ml) were supplemented to the medium for 8 days of culturing. To evaluate cellular proliferation and differentiation, specimens were examined for DNA, alkaline phosphatase activity, and calcium content. Morphological appearance of the specimens at 8 and 16 days of incubation was evaluated using scanning electron microscopy. Two separate experimental runs were performed. Evaluation of the DNA and alkaline phosphatase data revealed that a significant difference existed for these data between both experimental runs. Further analysis of the DNA figures learned that roughening of the titanium surface and addition of BMP-2 had no effect on cell proliferation. The alkaline phosphatase analysis and calcium measurements revealed that BMP-2 stimulated the early differentiation of osteogenic cells on machined titanium substrates in a dose-dependent manner. After 16 days of culture, no significant differences in calcium content could be observed anymore between machined and roughened titanium surfaces. Further, the data revealed that the machined surfaces showed a significant increase in calcium deposition when 100 and 1000 ng/ml BMP-2 were supplemented to the medium. However, the roughened surfaces showed this significant enhancement in calcium content only with 1000 ng/ml BMP-2. In addition, SEM evaluation revealed a dose-dependent response to BMP-2. Increasing BMP-2 concentrations resulted in more calcified globular accretions on bone surfaces than when no BMP-2 was added. On the basis of our results, we conclude that (1) due to the heterogeneous nature of bone marrow, experimental results with primary rat bone marrow cells are difficult to reproduce from one experiment to the other, and (2) addition of rhBMP-2 in the medium stimulates the early differentiation and matrix mineralization of osteogenic cells on machined titanium surfaces in a dose-responsive manner. Further, we concluded that our roughened titanium surfaces had no effect on proliferation and differentiation of primary derived rate bone marrow cells.

Evaluation of various seeding techniques for culturing osteogenic cells on titanium fiber mesh

The objective of the present study was to learn more about the effect of seeding and loading techniques on the osteogenic differentiation in vitro of rat bone marrow cells into titanium fiber mesh. This material was used as received or subjected to glow discharge treatment (RFGD). The seeding methods that were used included a so-called droplet, cell suspension (high and low cell density), and rotating plate method. Osteogenic cells were cultured for 4, 8, and 16 days into titanium fiber mesh. DNA, osteocalcin, scanning electron microscopy (SEM) analysis, and calcium measurements were used to determine cellular proliferation and differentiation. DNA analysis of the differently seeded specimens showed that proliferation proceeded faster in the first versus second run for droplet and cell suspension samples. No clear and distinct additional effect was found when RFGD treatment was used. Statistical analyses revealed that high cell density and low rotational speed resulted always in a significantly higher DNA content. Calcium measurements and osteocalcin analysis showed that using high cell densities during inoculation of the scaffolds prevented the occurrence of differences between experimental runs. SEM examination showed that for droplet and cell suspension samples cells were present at only one side of the mesh. The mesh side where the cell sheet was observed depended on the additional use of glow discharge treatment. On these materials, the cells had penetrated through the meshes and formed a cell sheet at the bottom side. When rotation was used, no cell sheet was formed and cells had invaded the meshes and were growing around the titanium fibers. On the basis of our results, we conclude that (1). titanium fiber mesh is indeed suitable to support the osteogenic expression of bone marrow cells, and (2). changing the initial cell density as well as the use of dynamic seeding methods can influence the osteogenic capacity of the scaffold.