Investigational study of the use of Er:YAG laser versus dental drill for caries removal and cavity preparation--phase I

The application of lasers in vital pulp therapy: clinical and radiographic outcomes

The main purpose of vital pulp therapy (VPT) is to preserve the integrity and function of the pulp. A wide variety of materials and techniques have been proposed to improve treatment outcomes, and among them, the utilization of lasers has gained significant attention. The application of lasers in different stages of VPT has witnessed remarkable growth in recent years, surpassing previous approaches.This study aimed to review the applications of lasers in different steps of VPT and evaluate associated clinical and radiographic outcomes. An electronic search using Scopus, MEDLINE, Web of Science and Google Scholar databases from 2000 to 2023 was carried out by two independent researchers. The focus was on human studies that examined the clinical and/or radiographic effects of different laser types in VPT. A total of 4243 studies were included in this narrative review article. Based on the compiled data, it can be concluded that although current literature suggests laser may be proposed as an adjunct modality for some procedural steps in VPT, more research with standardized methodologies and criteria is needed to obtain more reliable and conclusive results.

Removal of lithium disilicate veneers with Er,Cr:YSGGL laser: now? Or after ageing?

This study was purposed to assess the impact of ageing and resin cements polymerized with different modes on the removal time of lithium disilicate (LiSi) ceramics using Er,Cr:YSGG laser. Ninety LiSi slabs (6 × 6 × 1 mm) were cemented to freshly extracted bovine teeth using cements polymerized with different modes (light-curing (LC), dual-curing (DC), self-curing (SC)). The specimens were divided into subgroups according to ageing conditions (no thermal cycling, 5000 or 30,000 thermal cycling). After that, Er,Cr:YSGG laser was applied until LiSi slabs were debonded; the removal time was recorded. Vickers microhardness test, SEM and EDS analyses were performed for specimens with the longest exposure time to laser application in the groups. One uncemented sample was also used as a control. Data were analyzed with two-way ANOVA and Tukey post hoc test. Ageing and cement polymerization mode significantly affected the removal time of LiSi specimens. The removal time for the self-curing resin cement group (22.67 ± 12.68 s) was significantly longer than for cements polymerized with other methods (LC = 10.833 ± 7.28 s, DC = 12.0 ± 7.96 s). Removal time was significantly reduced after ageing in all polymerization modes; however, there were no significant differences between 5000 (11.83 ± 7.52 s) and 30,000 (11.83 ± 7.26 s) thermal cycling groups. Self-curing resin cements had prolonged the laser-aided removal time for LiSi ceramics. It can be concluded that Er,Cr:YSGG laser-aided removal of LiSi veneers after clinical use can be done more faster than its immediate removal.

Patient and Clinician Experiences When Using a CO2 Laser for Cavity Preparations: Lessons learned from Prospective Clinical Research

This prospective clinical study evaluated the experiences and preferences of both patients and clinicians when performing class I–V cavity preparation procedures using a 9300 nm CO2 laser without anesthetic. A total of 233 procedures were performed on 103 patients. Following treatment, patients were asked to describe discomfort/pain levels and preferences for future treatment with either laser treatment or traditional therapy. Additionally, clinicians were asked to rate their experiences with the procedures in three technical domains: speed, ease-of-use, and precision. In total, 98% of patients preferred laser treatment to traditional therapy and 93% of all procedures performed were completed with no anesthesia. Younger patients and patients receiving multiple restorations reported significantly higher discomfort, though discomfort scores were very low overall (below 3 on a 10-point pain scale). While there were significant differences in clinician experiences, each clinician reported having generally high satisfaction using the laser with respect to speed, ease of use, and precision. In conclusion, the 9300 nm CO2 laser provides clinicians a viable option for cavity preparations in dentistry as evidenced by high rates of anesthesia-free procedures with low reported discomfort, the fact that nearly all patients would opt for laser use on future cavity preparations, and generally positive experiences reported by clinicians.

Use of the Er:YAG Laser in Conservative Dentistry: Evaluation of the Microbial Population in Carious Lesions

The aim of this study is to investigate the Erbium:Yttrio-Aluminum-Granate (Er:YAG) laser photothermal and mechanical effects on cariogenic species concentration and on the microbial load composition of therapeutic cavities, in order to evaluate the possible micro-organisms reduction and make a comparison with manual and rotating conventional therapy (CT). A clinical trial was designed, including adults with active deep carious lesions on permanent teeth who were divided into two groups, i.e., control group and intervention group treated with CT and Er:YAG therapy, respectively. Before and after any conservative treatment, two oral samples were collected using a small sterile microbrush scrubbed within the base of the dentinal cavity tissue. The percentage of reduction and the colony-forming units (CFUs) count after Er:YAG and conventional treatments were compared for total microorganisms, including Candida spp., Streptococcus spp., and Lactobacillus spp. The microbial reduction varied from 90.2% to 100% and was significantly observed for total microorganisms and Streptococcus spp. (p < 0.05). The Er:YAG laser shows the potential for clinical applications, especially with paediatric and complicated patients, thanks to its minimally invasive properties and its effect on the reduction of microbial load.

Laser Analgesia Associated with Restorative Dental Care: A Systematic Review of the Rationale, Techniques, and Energy Dose Considerations

It is a common experience amongst laser dentists and patients that mid-IR wavelength application in cavity preparation may be achieved without causing any associated pain. The erbium family of lasers (Er,Cr:YSGG 2780 nm and Er:YAG 2940 nm) are frequently used without employing injectable local anesthesia as an adjunct: the phenomenon arising from the application of these devices is known as laser analgesia. This review seeks to apply a systematic approach to the examination of appropriate published studies but also to highlight the need for much more structured clinical investigations that consolidate photonic dose and methodology. A search of published data using PRISMA criteria was carried out to examine clinical trials into laser analgesia in conjunction with restorative dentistry, applying inclusion and exclusion criteria. From this, 10 published articles were selected for analysis. Suitability assessment was carried out, using a modified Cochrane risk of bias methodology. In 8/10 of the included studies, laser-induced analgesia is claimed to be better and effective, while in 2/10 of the studies, no difference was exhibited compared to the control group. Statistical analysis of three split mouth studies concluded that only one of these investigations reviewed demonstrated a significant analgesic effect for laser treatment while the other two did not support this observation. From this data, it is inconclusive to assess the predictability of laser analgesia in cavity preparation. A possible rationale and laser operating parametry has been discussed. Successful implementation of this treatment modality remains technique sensitive and subject to further investigation.

Selective Removal of Necrotic Dentin in Primary Teeth Using Laser Irradiation: One-Year Clinical Evaluation of Composite Restorations

Introduction: This study aimed to evaluate the child's salivary cortisol levels, clinical performance and marginal adaptation of restorations after selective removal of necrotic dentin in primary teeth using Er: YAG laser irradiation. Methods: A double-blind clinical study was performed in children at 7-10 years. Children who had at least 2 teeth with carious lesions involving the occlusal and proximal surfaces of primary molars counterparts were selected. Removal of necrotic dentin was performed by 2 methods: Er: YAG laser irradiation and bur-preparation. Cortisol levels (n =24) was evaluated by ELISA. Clinical analysis (n =20) was performed after the restorations polish, 6 and 12 months after restorative procedure using United States Public Health Service (USPHS) method and photographs. Scanning electron microscopy (SEM) was used to analyz the marginal gap formation (n =20). The analysis of the data was performed by 95% confidence interval, Shapiro-Wilk test, Friedman and Wilcoxon post hoc tests (α =5%). Results: Cortisol levels were higher during selective removal of necrotic dentin, regardless of the method used (P>0.05). After 12 months, there was no evidence of the difference in the restorations performed on cavities prepared by both methods. SEM analysis revealed that the laser-irradiated teeth showed 10% of gaps in the full extent of restoration. For bur-prepared teeth, 20% of gaps were found at the cavosurface margin. Conclusion: The salivary cortisol levels on children that received Er: YAG laser irradiation for removal the necrotic dentin was similar to the control group. Class II restorations evaluated after 1 year period did not suffer interference by the use of Er: YAG laser irradiation.

Cavity Preparation by Laser in Primary Teeth: Effect of 2 Levels of Energy Output on the Shear Bond Strength of Composite Restoration to Dentin

Introduction: One of the main applications of laser in dentistry is the removal of dental caries and preparation of restorative cavities. The morphology and wettability of laser prepared surfaces are different from that of those prepared with conventional method which may affect the quality of the adhesive potential of bonding agents in these surfaces. This study aimed to assess the shear bond strength of a total-etch and self-etch adhesive system to primary tooth dentin prepared by two different energy densities of Er:YAG laser in comparison with surfaces prepared by bur. Methods: A total of 60 human primary second molars extracted for orthodontic purposes were selected and randomly divided into 3 main groups of equal (n=20). Group A: Preparation of dentin surface by bur; group B: Preparation of dentin surface by laser with 300 mJ energy level; group C: Preparation of dentin surface by laser with 400 mJ energy level. In each of the main groups, the teeth were randomly assigned to 2 subgroups. Composite resin material was bonded with the total-etch adhesive system in subgroups A1, B1, and C1 and with the self-etch adhesive system in subgroups A2, B2, and C2. The samples were thermo-cycled, and composite restorations shear bond strength was measured in MPa. Data were analyzed using two-way analysis of variance (ANOVA), and P values less than 0.05 were considered statistically significant. Results: The highest and the lowest shear bond strength values were observed in group A2 (Preparation by bur- Composite resin material bonded by Clearfil SE Bond) and group C2 (Preparation by laser with 400 mJ energy level - Composite resin material bonded by Clearfil SE Bond), respectively. The results showed no statistically significant differences between the study subgroups (P > 0.05). Conclusion: It is concluded that in terms of shear bond strength to dentin, Single Bond and Clearfil SE Bond adhesive agents adequately perform in primary tooth dentin prepared by Er: YAG laser with energy levels of 300 and 400 mJ and frequency of 10 Hz.

The Rate of Demineralization in the Teeth Prepared by Bur and Er:YAG Laser

Introduction: The present in vitro study evaluated the recurrence rate of caries following cavity preparations with bur (conventional technique) and irradiation by Erbium:Yttrium- Aluminum-Garnet (Er:YAG) laser through micro hardness test. Methods: A total of 72 human extracted molars were randomly divided into 3 groups and class 5 cavities were prepared on them with 3 different methods: G1) conventional bur, G2) Er:YAG laser irradiation alone and G3) laser irradiation + laser treatment. The specimens were immersed in the artificial caries solution with pH of 2.0 and 5.0 (12 days) and then immersed in re-mineralizing solution with pH of 7.0 (25 days). The specimens were longitudinally sectioned and their Vickers micro hardness was determined. Data were statistically analyzed by means of three-way analysis of variance (ANOVA) and Tukey multiple comparisons tests. Results: The micro hardness of the samples was affected by substrate type (enamel and dentin) and low values were achieved in dentin (P<0.001). Moreover, no significant difference was observed between preparation methods by bar and laser irradiation alone (P ≤0.499). Although laser irradiation + laser treatment decreased micro hardness of enamel compared to other methods. In dentin samples, different methods of preparation showed no significant effect on micro hardness (P ≤0.874). Conclusion: Due to the similar values of micro hardness following G1 and G2, it seems that Er:YAG laser alone is as much effective as the conventional bur to prevent recurrence caries. However, because of the high prices of laser instruments, bur preparations can be done commonly.

Erbium Laser Technology vs Traditional Drilling for Caries Removal: A Systematic Review with Meta-Analysis

OBJECTIVE

The study aimed to assess the efficacy of erbium laser technology compared with traditional drilling for caries removal.

METHODS

A systematic search was conducted through Medline via PubMed, Embase, Cochrane databases, CNKI till December 2016. Randomised controlled trials, quasi-randomized controlled trials, or controlled clinical trials with data comparing the efficacy of erbium laser technology versus traditional drilling for caries removal were included.

RESULTS

Fourteen studies were selected in our meta-analysis. Erbium laser technology showed an increased time when removing caries compared with drilling (mean difference: 3.48, 95% confidence interval: 1.90-5.06, P < .0001). However, erbium laser technology reduced the requirement for local anesthesia (risk ratio: 0.28, 95% confidence interval: 0.13-0.62, P = .002). Erbium laser technology was also not significantly different to traditional drilling with regard to restoration loss, pulpal vitality, and postoperative sensitivity.

CONCLUSIONS

Erbium laser technology showed an increased time for cavity preparation compared with traditional drilling. However, erbium laser technology reduced the requirement for local anesthesia. There was no significant difference between erbium laser technology and traditional drilling regarding restoration loss, pulpal vitality, and postoperative sensitivity.

Bonding to Er-YAG-laser-treated Dentin

Er-YAG laser irradiation has been claimed to improve the adhesive properties of dentin. We tested the hypothesis that dentin adhesion is affected by Er-YAG laser conditioning. Superficial or deep dentin from human molars was: (a) acid-etched with 35% H3PO4; (b) irradiated with an Er-YAG laser (KaVo) at 2 Hz and 180 mJ, with water-cooling; and (c) laser- and acid-etched. Single Bond (3M ESPE) and Z100 composite (3M ESPE) were bonded to the prepared surfaces. After storage, specimens were tested in shear to failure. Bonded interfaces were demineralized in EDTA and processed for transmission electron microscopy. Two-way ANOVA revealed that conditioning treatment and interaction between treatment and dentin depth significantly influenced shear bond strength results. Acid-etching alone yielded shear bond strength values that were significantly higher than those achieved with laser ablation alone, or in combination with acid-etching. The Er-YAG laser created a laser-modified layer that adversely affects adhesion to dentin, so it does not constitute an alternative bonding strategy to conventional acid etching.

Effect of Er:Yag laser on dentin demineralization around restorations

The aim of this study was to evaluate the effect of cavity preparation with Er:YAG laser on dentin adjacent to restorations submitted to cariogenic challenge in situ, by subsuperficial microhardness analysis. Bovine incisors were sectioned, flattened, and polished, resulting in 40 dentin slabs. The slabs were randomly assigned to four groups (n = 10), according to the cavity preparation method: I-high-speed handpiece (control); II-Er:YAG laser (160 mJ; 3 Hz); III-Er:YAG laser (260 mJ; 3 Hz); IV-Er:YAG laser (300 mJ; 3Hz). Cavities were restored with composite resin, and the specimens were fixed in intra-oral appliances, which were worn by 10 volunteers for 14 days for simulating cariogenic challenge in situ. During the experimental period, 20% sucrose solution was dripped over each specimen 6 times a day. Samples were removed, sectioned, and examined for subsuperficial Knoop microhardness at 100, 200, and 300 μm from the restoration and at 30 μm from dentin surface. Split-plot analysis of variance showed no significant difference among the cavity preparation techniques (p = 0.1129), among distances (p = 0.9030), as well as no difference in the interaction between the main factors (p = 0.7338). It was concluded that the cavity preparation with Er:YAG laser did not influence on dentin microhardness submitted to cariogenic challenge in situ.

Lasers for caries removal in deciduous and permanent teeth

BACKGROUND

Despite considerable improvements in oral health, dental caries continue to be a public health issue. The most frequently used, and universally accepted technique, to remove caries is through mechanical ablation of decayed tissues by means of rotating drills (diamond or tungsten carbide, or both). In the past few decades, the introduction of adhesive filling materials (resin composites) has affected cavity filling procedures by reducing its retention needs, with advantages for dental tissue conservation. Consequently, new minimally invasive strategies were introduced into dental practice, such as the use of lasers to perform highly controlled tissue ablation. Laser use has also raised expectations of limiting pain and discomfort compared to using drills, as well as overcoming drill phobia.

OBJECTIVES

The main objective of the review was to compare the effects of laser-based methods to conventional mechanical methods for removing dental caries in deciduous and permanent teeth.

SEARCH METHODS

We searched the following electronic databases: Cochrane Oral Health's Trials Register (searched 22 June 2016), Cochrane Central Register of Controlled Trials (CENTRAL; 2016, Issue 5) in the Cochrane Library (searched 22 June 2016), MEDLINE Ovid (1946 to 22 June 2016), Embase Ovid (1980 to 22 June 2016), ProQuest Dissertations and Theses (1980 to 22 June 2016), Zetoc (limited to conference proceedings) (1993 to 22 June 2016), and ISI Web of Knowledge (limited to conference proceedings) (1990 to 22 June 2016). We checked the reference lists of relevant articles to identify additional studies. We searched the US National Institutes of Health Ongoing Trials Register ClinicalTrials.gov and the World Health Organization International Clinical Trials Registry Platform for ongoing trials.

SELECTION CRITERIA

We included randomised controlled trials, split-mouth trials and cluster-randomised trials (irrespective of their language) comparing laser therapy to drill ablation of caries. We included participants of any age (children, adolescents and adults).

DATA COLLECTION AND ANALYSIS

Two review authors independently screened titles and abstracts of citations identified by the review search strategy. Two review authors independently evaluated the full text of relevant primary studies, assessed risk of bias and extracted data. We used standard methodological procedures expected by Cochrane.

MAIN RESULTS

We included nine randomised trials, published between 1998 and 2014, involving 662 participants. The population consisted of both children and adolescents in four trials, only adults in four trials, and both children/adolescents and adults in one trial. Four studies examined only permanent teeth, and five studies evaluated both deciduous and permanent teeth. Six trials used Er:YAG (erbium-doped yttrium aluminium garnet) lasers, two trials employed Er,Cr:YSGG (erbium, chromium: yttrium-scandium-gallium-garnet) lasers, and one trial used Nd:YAG (neodymium-doped yttrium aluminium garnet) laser.Overall, the trials had small sample sizes, and the majority were at unclear or high risk of bias. The primary outcomes were evaluated in a limited number of trials (removal of caries (four trials (but only two reported quantitative data)); episodes of pain (five studies)). There was insufficient evidence to suggest that either lasers or drill were better at caries removal (risk ratio (RR) 1.00, 95% confidence interval (CI) 0.99 to 1.01; 2 studies; 256 treated caries; P = 0.75; I² = 0%; low-quality evidence).The incidence of moderate or high pain was greater in the drill group compared to the laser group (RR 0.40, 95% CI 0.28 to 0.57; 2 studies; 143 participants; P < 0.001; I² = 50%). Similarly, the need for anaesthesia was significantly higher in the drill group than in the laser group (RR 0.25, 95% CI 0.10 to 0.65; 3 studies; 217 children/adolescents; P = 0.004; I² = 0%).In terms of marginal integrity of restoration, there was no evidence of a difference between laser and drill comparisons evaluated at 6 months (RR 1.00, 95% CI 0.21 to 4.78; 3 studies), 1 year (RR 1.59, 95% CI 0.34 to 7.38; 2 studies), or 2 years (RR 1.00, 95% CI 0.21 to 4.74; 1 study).There was no evidence of a difference for durability of restoration between laser therapy or drill at 6 months' follow-up (RR 2.40, 95% CI 0.65 to 8.77; 4 studies), at 1 year (RR 1.40, 95% CI 0.29 to 6.78; 2 studies) or at 2 years' follow-up (RR 0.50, 95% CI 0.02 to 14.60; 1 study).Only two trials investigated the recurrence of caries, but no events occurred during 6 months' follow-up.There was insufficient evidence of a difference between laser or drill in terms of pulpal inflammation or necrosis at 1 week (RR 1.51, 95% CI 0.26 to 8.75; 3 studies) and at 6 months (RR 0.99, 95% CI 0.10 to 9.41; 2 studies).

AUTHORS' CONCLUSIONS

Given the low quality of the body of evidence, we concluded that evidence was insufficient to support the use of laser as an alternative to traditional drill therapy for caries removal. We found some evidence in favour of laser therapy for pain control, need of anaesthesia and patient discomfort, but, again, the body of evidence was of low quality. Additional well-designed, randomised trials investigating the most relevant outcomes are needed.

Effect of indomethacin-loaded nanocapsules incorporation in a dentin adhesive resin

OBJECTIVES

The aim of this study was to produce indomethacin-loaded nanocapsules (IndOH-NCs) and evaluate the influence of their incorporation into an adhesive resin.

MATERIALS AND METHODS

Indomethacin was encapsulated by the deposition of preformed polymer. IndOH-NCs were characterized by laser diffractometry, Fourier transformed infrared spectrometry, transmission electron microscopy (TEM), scanning electron microscopy, high-performance liquid chromatography (HPLC), and MTT assay. Nanocapsules (NCs) were incorporated into an adhesive in concentrations of 1, 2, 5, and 10 %. The addition was visualized by TEM and drug release was evaluated by HPLC until 120 h of immersion in simulated body fluid (SBF). Drug diffusion through dentin was tested using a Franz diffusion cell apparatus and quantified by HPLC. The degree of conversion (DC), softening in ethanol, and microtensile bond strength (μTBS) were evaluated to determine whether the nanocapsules influenced the adhesive. Data were analyzed using one-way ANOVA and Tukey's post hoc test for DC, softening in ethanol, μTBS, and cytotoxicity, and paired t test for comparison between the initial and final Knoop microhardness.

RESULTS

IndOH-NCs, with a spherical shape and a mean diameter of 165 nm, were incorporated into an adhesive. Indomethacin content was 7 mg drug/g powder. IndOH-NCs maintained high cell viability. At 120 h, an amount of 13.83 % of indomethacin was released, and after 7 days, 7.07 % of this drug was diffused through dentin for an adhesive containing 10 % of nanocapsules. No alteration in the DC, softening in ethanol, and μTBS resulted from NC addition.

CONCLUSIONS

IndOH-NCs may be incorporated into adhesive systems, without compromising properties, to add an anti-inflammatory drug controlled release for restorative procedures in deep cavities.

CLINICAL SIGNIFICANCE

Here is the first step toward the goal of providing agents to act at an inflammatory process of pulp tissue through dental adhesives via encapsulation of drug.

Fracture Forces of Dentin after Surface Treatment with High Speed Drill Compared to Er:YAG and Er,Cr:YSGG Laser Irradiation

Dental tooth restorative procedures may weaken the structural integrity of the tooth, with the possibility of leading to fracture. In this study we present findings of coronal dentin strength after different techniques of surface modification. The fracture strength of dentin beams after superficial material removal with a fine diamond bur high speed drill hand piece, Er:YAG (2.94 μm, 8 J/cm(2)), and Er,Cr:YSGG (2.78 μm, 7.8 J/cm(2)) laser irradiation slightly above the ablation threshold was measured by a four-point bending apparatus. Untreated dentin beams served as a control. A total of 58 dentin beams were manufactured from sterilized human extracted molars using the coronal part of the available dentin. Mean values of fracture strength were calculated as 82.0 ± 27.3 MPa for the control group (n = 10), 104.5 ± 26.3 MPa for high speed drill treatment (n = 10), 96.1 ± 28.1 MPa for Er,Cr:YSGG laser irradiation (n = 20), and 89.1 ± 36.3 MPa for Er:YAG laser irradiation (n = 18). Independent Student's t-tests showed no significant difference between each two groups (p > 0.05). Within the parameter settings and the limits of the experimental setup used in this study, both lasers systems as well as the high speed drill do not significantly weaken coronal dentin after surface treatment.

Applications of Light Amplification by Stimulated Emission of Radiation (Lasers) for Restorative Dentistry

Light amplification by stimulated emission of radiation (laser) has been used widely in a range of biomedical and dental applications in recent years. In the field of restorative dentistry, various kinds of lasers have been developed for diagnostic (e.g. caries detection) and operative applications (e.g. tooth ablation, cavity preparation, restorations, bleaching). The main benefits for laser applications are patient comfort, pain relief and better results for specific applications. Major concerns for using dental lasers frequently are high cost, need for specialized training and sensitivity of the technique, thereby compromising its usefulness particularly in developing countries. The main aim of this paper is to evaluate and summarize the applications of lasers in restorative dentistry, including a comparison of the applications of lasers for major restorative dental procedures and conventional clinical approaches. A remarkable increase in the use of lasers for dental application is expected in the near future.

Er:YAG laser dentistry in special needs patients

OBJECTIVE

Between a quarter and a third of adults with intellectual disability is estimated to have dental anxiety. Unpleasant stimuli, such as the injection of local anaesthesia or the noise and vibration of rotary instruments, may provoke anxiety and subsequent low compliance until the opposition to the treatment. The use of Er:YAG laser in conservative dentistry had a great development in these last years thank to new devices and also to their advantages when compared to the conventional instruments. The aim of this clinical study was to show the advantages of the Er:YAG laser in the conservative treatment of Special Care patients.

METHODS

Four cases are here described to show the Er:YAG laser use in our Unit on special needs patients.

RESULTS AND CONCLUSIONS

Based on the experience gained on conservative laser-assisted treatments performed in a time of 5 years at our Dentistry, Special Needs and Maxillo-Facial Surgery Unit we may affirm that Er:YAG laser may be considered as a good way to improve the cooperation, to reduce anxiety related to rotating instruments and to reach better results with equal or shorter operating times.

Using an Er,Cr:YSGG laser to remove lithium disilicate restorations: A pilot study

STATEMENT OF PROBLEM

The use of lasers is growing widely in dentistry. Despite its clinical implications, most information and clinical data related to the removal of ceramic restorations with the aid of a laser is either anecdotal or in the form of clinical reports.

PURPOSE

The purpose of this in vitro study was to establish a parameter on the removal of lithium disilicate crowns with a laser and conduct an in vitro trial of crown removal based on the wattage and time of application.

MATERIAL AND METHODS

Twenty extracted molars were prepared to accommodate a lithium disilicate disk specimen, which was cemented with resin cement. An erbium, chromium-doped yttrium, scandium, gallium, and garnet (Er,Cr:YSGG) laser was applied at different wattages (3, 3.5, 4, and 5 W) to determine the optimal wattage for the removal of the lithium disilicate specimens. Once the optimal wattage was established, 25 extracted teeth were mounted in stone, then prepared to receive milled lithium disilicate computer-aided design/computer-aided manufacturing complete coverage crowns. The crowns were cemented with a dual-polymerizing resin cement. The groups comprised 3.5 and 4 W output with 30-, 60-, and 90-second application time (n=5), and 5 crowns were removed using traditional handpiece and electric handpiece with coarse grit diamond rotary instruments. The results and time required to remove the crown were recorded. The chi-square test was performed to assess any significant differences in removing the crown with the laser according to wattage or time of application (α=.05).

RESULTS

Laser application at 3.5 and 4 W was best for removing crowns conservatively. Eight crowns (40%) of 20 specimens were successfully removed at the first attempt. The majority of the crowns came off during the second attempt. The chi-square test revealed no significant difference between the combination of wattage and time of application (P= .92). The mean time to remove the lithium disilicate crown with a diamond rotary instrument was 6 minutes, and removal required 1.8 instruments on the average.

CONCLUSIONS

An Er,Cr:YSGG laser can safely remove lithium disilicate crowns with the settings used this study.

Discrimination of healthy and carious teeth using laser-induced breakdown spectroscopy and partial least square discriminant analysis

In the laser drilling of teeth, a microplasma is generated which may be utilized for elemental analysis of ablated tissue via a laser-induced breakdown spectroscopy (LIBS) technique. In this study, LIBS is used to investigate the possibility of discrimination of healthy and carious tooth tissues. This possibility is examined using multivariate statistical analysis called partial least square discriminant analysis (PLS-DA) based on atomic and ionic emission lines of teeth LIBS spectra belonging to P, Ca, Mg, Zn, K, Sr, C, Na, H, and O elements. Results show an excellent discrimination and prediction of unknown tooth tissues. It is shown that using the PLS-DA method, the spectroscopic analysis of plasma emission during the laser drilling, would be a promising technique for caries detection.

High peak power Q-switched Er:YAG laser with two polarizers and its ablation performance for hard dental tissues

An electro-optically Q-switched high-energy Er:YAG laser with two polarizers is proposed. By using two Al(2)O(3) polarizing plates and a LiNbO(3) crystal with Brewster angle, the polarization efficiency is significantly improved. As a result, 226 mJ pulse energy with 62 ns pulse width is achieved at the repetition rate of 3 Hz, the corresponding peak power is 3.6 MW. To our knowledge, such a high peak power has not been reported in literature. With our designed laser, in-vitro teeth were irradiated under Q-switched and free-running modes. Results of a laser ablation experiment on hard dental tissue with the high-peak-power laser demonstrates that the Q-switched Er:YAG laser has higher ablation precision and less thermal damage than the free-running Er:YAG laser.

Role of surface tension and roughness on the wettability of Er:YAG laser irradiated dentin: In vitro study

INTRODUCTION

The aim of this "in vitro" study was to evaluate the role of surface tension and surface roughness in the wettability, considered essential for a good adhesion, comparing Er:YAG laser - to bur-prepared dentin.

MATERIALS AND METHODS

Dentin surfaces of third human molars were Er:YAG laser- and bur-prepared to evaluate the effects of surface tension and roughness on wettability and interferometric analysis was used to compare the roughness of the two groups surfaces, after gold-coating them.

RESULTS

In bur-prepared samples the time taken for the water drop to spread out was approximately the same with or without metallization while, in the Er:YAG laser-prepared surfaces the spreading-out time was less than 10 seconds but longer after metallization i.e. nearly two minutes. Large differences in wettability measurements were observed because the water drop was almost immediately absorbed on the Er:YAG laser-prepared surface. The wettability test demonstrated that the porous and hydrophilic properties of Er:YAG laser-prepared surfaces are higher than bur-prepared surfaces.

CONCLUSION

Surface tension, surface morphology and porosity had different effects on the spreading time of a water drop on both Er:YAG laser- and bur-prepared surfaces. And, while surface tension does not seem to influence the results, roughness appears to be the main parameter involved in water drop spreading, this being an indication, by the clinical point of view, to the choice of Er:YAG laser parameters in conservative dentistry.

Dental ablation with 1064 nm, 500 ps, Diode pumped solid state laser: A preliminary study

BACKGROUND

The Er:YAG laser in conservative dentistry is. good alternative to conventional instruments. Though several studies show the advantages of these devices, some drawbacks and unsolved problems are still present, such as the cost of the device and the large dimensions of the equipment.

PURPOSE

In the present study, the effectiveness of dental surface ablation with a picosecond infrared diode-pumped solid-state (DPSS) laser was investigated. In vitro tests on extracted human teeth were carried out, with assessment of the ablation quality in the tooth and thermal increase inside the pulp chamber.

MATERIALS AND METHODS

A solid-state picosecond laser was used for the experiments. The samples were exposed to laser energy at 1064 nm at a frequency of 30 kHz and a 500 ps pulse width. The target teeth were cooled during exposures. The internal temperature of the pulp chamber was monitored with. thermocouple.

RESULTS

Optical microscope images showed effective ablation with the absence of carbonisation and micro-cracks. The cooling maintained the temperature rise in the pulp chamber below the permitted 5.5°C.

DISCUSSION

The main problem with the use of lasers in dentistry when teeth are the target is the heat generated in the pulp chamber of the target teeth. With lasers operating in the femtosecond mode, a better management of the internal temperature is possible, but is offset by the high cost of such devices. With the ps domain system used in the present study together with cooling using chilled water, effective and clean ablation could be achieved with a controlled thermal effect in the pulp chamber.

CONCLUSIONS

In this preliminary study with a picosecond domain DPSS laser using water cooling for the target, effective hard tissue ablation was achieved keeping the thermal increase in the pulp within the permitted range. The results suggest that this system could be used in clinical practice with appropriate modifications.

Er:YAG and adhesion in conservative dentistry : clinical overview

The notion of utilizing laser technology in conservative dentistry was proposed in 1990 by Hibst and Keller, who introduced the possibility of using an Er:YAG laser as alternative to conventional instruments such as the turbine and micro-motor. In subsequent years a continuing effort has been made by clinicians, researchers and commercial companies to improve the technology. The aim of this clinical study is to demonstrate, by the description of different clinical cases, the possibilities and the advantages of using Er:YAG lasers in conservative dentistry and to show that better results may be achieved in terms of stronger adhesion, less invasiveness, reduced pain as well as greater comfort and satisfaction of patients.

Laser in dentistry: An innovative tool in modern dental practice

The term LASER is an acronym for ‘Light Amplification by the Stimulated Emission of Radiation’. As its first application in dentistry by Miaman, in 1960, the laser has seen various hard and soft tissue applications. In the last two decades, there has been an explosion of research studies in laser application. In hard tissue application, the laser is used for caries prevention, bleaching, restorative removal and curing, cavity preparation, dentinal hypersensitivity, growth modulation and for diagnostic purposes, whereas soft tissue application includes wound healing, removal of hyperplastic tissue to uncovering of impacted or partially erupted tooth, photodynamic therapy for malignancies, photostimulation of herpetic lesion. Use of the laser proved to be an effective tool to increase efficiency, specificity, ease, and cost and comfort of the dental treatment.

Er:YAG laser or high-speed bur for cavity preparation in adolescents

OBJECTIVES

The aim was to evaluate the effect on cavity preparation time, the pulse changes and the patient's subjective experience during removal of healthy tooth substance with high-speed bur and Er:YAG laser.

MATERIALS AND METHODS

Thirty-five (13 male, 22 female) 14-18-year-olds participated. After local anaesthesia, Er:YAG laser and high-speed diamond bur were used for a 2 mm deep cavity preparation on the middle of the buccal surface on contra-lateral healthy maxillary first premolars. The cavity preparation time and the pulse were measured during the treatment. Subjective experience was evaluated using a VAS-scale and a questionnaire. Wilcoxon Signed Rank test and Chi-2-test were used for statistical analyses.

RESULTS

The mean (SD) cavity preparation time was 3.7-times longer (p < 0.001) for the laser [59 (41) s] than for the high-speed bur [16 (4) s]. The mean pulse change during preparation differed (p < 0.05) between the bur (+2.2%) and laser (-4.4%). The smell was worse when laser was used (p < 0.01); 65.7% expressed less discomfort and 57.1% experienced a lower sound level when laser was used. Laser was preferred for future treatment in 62.9% of the adolescents.

CONCLUSION

Laser ablation caused unpleasant smell and longer cavity preparation time, but was preferred by a majority of the adolescents.

Measurement of solubility and water sorption of dental nanocomposites light cured by argon laser

Different parameters used for photoactivation process and also composition provide changes in the properties of dental composites. In the present work the effect of different power density of argon laser and filler loading on solubility (SL) and water sorption (WS) of light-cure dental nanocomposites was studied. The resin of nanocomposites was prepared by mixing bisphenol A glycol dimethacrylate (Bis-GMA) and triethylene glycol dimethacrylate (TEGDMA) with a mass ratio of 65/35. 20 wt.% and 25 wt.% of nanosilica fillers with a primary particle size of 10 nm were added to the resin. Camphorquinone (CQ) and DMAEMA were added as photoinitiator system. The nanocomposites were cured by applying the laser beam at the wavelength of 472 nm and power densities of 260 and 340 mW/cm(2) for 40 sec. Solubility and water sorption were then measured according to ISO 4049, which in our case, the maximums were 2.2% and 4.3% at 260 mW/cm(2) and 20% filler, respectively. The minimum solubility (1.2%) and water sorption (3.8%) were achieved for the composite containing 25% filler cured at 340 mW/cm(2). The results confirmed that higher power density and filler loading decreased solubility of unreacted monomers and water sorption and improved physico-mechanical properties of nanocomposites.

Er:YAG Laser and Fractured Incisor Restorations: An In Vitro Study

Introduction. The aim of this study was to analyse the effects of an Er:YAG laser on enamel and dentine in cases of dental restorations involving fractured teeth, utilizing the dental fragment. Materials and Methods. Seventy-two freshly extracted bovine incisors were fractured at the coronal level by using a hammer applied with a standardized method, and the fragment was reattached by using three different methods: Er:YAG laser, orthophosphoric acid, and laser plus acid. The different groups were evaluated by a test realized with the dynamometer to know the force required to successfully detach the reattached fragment and by a microinfiltration test by using a 0.5% methylene blue solution followed by the optic microscope observation. Results. The compression test showed only a slight difference between the three groups, without any statistical significance. The infiltration test used to evaluate the marginal seal between the fracture fragment and the tooth demonstrated that etching with Er:YAG laser alone or in combination with orthophosphoric acid gives better results than orthophosphoric acid alone, with a highly significant statistical result. Discussion. Reattaching a tooth fragment represents a clinically proven methodology, in terms of achieving resistance to detachment, and the aim of this work was to demonstrate the advantages of Er:YAG laser on this procedure. Conclusion. This “in vitro” study confirms that Er:YAG laser can be employed in dental traumatology to restore frontal teeth after coronal fracture.

Application of laser technology for removal of caries: a systematic review of controlled clinical trials

OBJECTIVE

To evaluate the scientific evidence regarding laser technology for removal of carious tissue.

MATERIAL AND METHODS

A search for literature on the effect of treatment and on economic aspects of laser technology identified 23 papers. No relevant studies on economic aspects were found. Regarding the effect of treatment, 16 papers were selected for assessment according to established criteria.

RESULTS

Cavity preparation and caries excavation by erbium laser were evaluated in three studies of medium quality. The time required to remove carious tissue was evaluated in five studies assessed as being of medium quality for this outcome. In four studies the effect of laser treatment on the dental pulp was included as an outcome but, due to the short follow-up time, the quality was assessed as low. Two studies that included the longevity of the restoration as an outcome were also assessed as being of low quality because the follow-up time was inadequate. Patient response was evaluated in three studies, which were assessed as being of medium quality with respect to this outcome.

CONCLUSIONS

There is limited scientific evidence that laser treatment is as effective as a rotary bur for removing carious tissue. Treatment time is prolonged. There is limited scientific evidence that adults prefer laser treatment. No conclusions can be drawn regarding biological or technical complications, children's perception of laser treatment or the cost-effectiveness of the method.

Tensile bond strength of sealants following Er:YAG laser etching compared to acid etching in permanent teeth

The aim of this in vitro study was to assess the effect of Er:YAG laser surface treatment on the tensile bond strength of a sealant in permanent teeth. A total of 30 sound third molars were selected and embedded in cold-cure acrylic resin. The enamel surfaces were flattened by a grinding. The teeth were randomly divided into three groups and pretreated as follows: (1) 37% phosphoric acid; (2) Er:YAG laser (1.5 ml/min water spray, 100 mJ energy output, 10 Hz frequency, focal distance 17 mm); (3) Er:YAG laser + 37% phosphoric acid. The treated surfaces were isolated by double adhesive Sellotape and after insertion of a split Teflon matrix at an isolated site, sealant was applied. The specimens were thermocycled and stored at 37°C in distilled water for 72 h, then subjected to a tensile bond strength test (50 kgf at 0.5 mm/min). The mean tensile bond strengths (± SD, in megapascals) were: 18.51 ± 5.68 in group 1, 8.06 ± 2.69 in group 2, and 17.33 ± 5.04 in group 3. Data were submitted to analysis of variance and the Tukey test. No significant difference were found between groups 1 (37% phosphoric acid) and group 3 (Er:YAG laser + 37% phosphoric acid) but treatment with the Er:YAG laser alone (group 2) resulted in significantly lower tensile bond strength than seen in the other groups. In this setting, the Er:YAG laser prepared the enamel surface for sealing but did not eliminate the need for acid etching before sealant application.

Scanning electron microscopy study of cavity preparation in deciduous teeth using the Er:YAG laser with different powers

Using scanning electron microscopy (SEM) we evaluated the morphology of cavity surfaces in deciduous teeth prepared in vitro with the Er:YAG laser with different power parameters. Eight extracted cavity-free deciduous teeth with an intact crown were prepared using a traditional handpiece or an Er:YAG laser with different parameters (10 Hz/200 mJ, 10 Hz/300 mJ and 10 Hz/400 mJ). Samples were then processed and cavity surface morphology was evaluated by SEM to detect open dentinal tubules, or melting or cracking of the dentin. SEM showed that laser cavity preparation in deciduous teeth using different parameters left no smear layer and the dentinal tubules were clear. Dentin melting was not seen after cavity preparation at 200 mJ or 300 mJ, while visible dentin melting and cracks were detected at 400 mJ. The use of the laser at 10 Hz/200 mJ and 10 Hz/300 mJ for cavity preparation in deciduous teeth is safe and effective, but higher powers may damage the dentin.

The influence of erbium:yttrium-aluminum-garnet laser ablation with variable pulse width on morphology and microleakage of composite restorations

The objective of this study was to evaluate the influence of various pulse widths with different energy parameters of erbium:yttrium-aluminum-garnet (Er:YAG) laser (2.94 mum) on the morphology and microleakage of cavities restored with composite resin. Identically sized class V cavities were prepared on the buccal surfaces of 54 bovine teeth by high-speed drill (n = 6, control, group 1) and prepared by Er:YAG laser (Fidelis 320A, Fotona, Slovenia) with irradiation parameters of 350 mJ/ 4 Hz or 400 mJ/2 Hz and pulse width: group 2, very short pulse (VSP); group 3, short pulse (SP); group 4, long pulse (LP); group 5, very long pulse (VLP). All cavities were filled with composite resin (Z-250-3 M), stored at 37 degrees C in distilled water, polished after 24 h, and thermally stressed (700 cycles/5-55 degrees C). The teeth were impermeabilized, immersed in 50% silver nitrate solution for 8 h, sectioned longitudinally, and exposed to Photoflood light for 10 min to reveal the stain. The leakage was evaluated under stereomicroscope by three different examiners, in a double-blind fashion, and scored (0-3). The results were analyzed by Kruskal-Wallis test (P > 0.05) and showed that there was no significant differences between the groups tested. Under scanning electron microscopy (SEM) the morphology of the cavities prepared by laser showed irregular enamel margins and dentin internal walls, and a more conservative pattern than that of conventional cavities. The different power settings and pulse widths of Er:YAG laser in cavity preparation had no influence on microleakage of composite resin restorations.

Influence of output energy and pulse repetition rate of the Er:YAG laser on dentin ablation

OBJECTIVE

We sought to improve the efficiency of dentin ablation with the Er:YAG laser by investigating the effects of output energy and pulse repetition rate on ablation.

BACKGROUND DATA

The Er:YAG laser is superior to other lasers in ablating dental hard tissues. However, the factors affecting the efficiency of ablation with an Er:YAG laser remain unclear.

METHODS

Fifty bovine root dentin plates were irradiated with an Er:YAG laser at an output power of 1.0 W, 1.5 W, or 2.0 W under a water spray while moving the plate at 1 mm/sec. After irradiation, the depth and volume of each ablated site were measured by laser microscopy and the ablated surfaces were examined by scanning electron microscopy.

RESULTS

The output power showed a strong positive correlation with the depth and volume of ablation. The output energy had much more pronounced effects on the depth and volume of ablation compared to the pulse repetition rate. The shape of the ablated site varied with the output power, and no cracking or vitrification was observed under the irradiated dentin. The most effective parameters for dentin ablation were an output power of 2.0 W, with an output energy of 80 mJ/pulse at 25 pulses per second (pps) or 100 mJ/pulse at 20 pps.

CONCLUSION

These findings suggest that the output energy is the main factor affecting the efficiency of dentin ablation with an Er:YAG laser. We propose that the efficiency of dentin ablation can be improved by choosing an optimal combination of output energy and repetition rate.

Bond durability in erbium:yttrium-aluminum-garnet laser-irradiated enamel

This study sought to evaluate the influence of thermocycling and water storage on the microtensile bond strength of composite resin bonded to erbium:yttrium-aluminum-garnet (Er:YAG)-irradiated and bur-prepared enamel. Eighty bovine incisors were selected and sectioned. Specimens were ground to produce a flat enamel surface. Samples were randomly assigned according to cavity preparation device: (I) Er:YAG laser and (II) high-speed turbine, and were subsequently restored with composite resin. They were subdivided according to the duration of water storage (WS)/number of thermocycles (TCs): 24 h WS/no TCs; 7 days WS/500 TCs; 1 month WS/2,000 TCs; 6 months WS/12,000 TCs. The teeth were sectioned into 1.0 mm(2)-thick slabs and subjected to tensile stress in a universal testing machine. Data were submitted to two-way analysis of variance (ANOVA) and Tukey's test at a 0.05 significance level. The different periods of water storage and thermocycling did not influence the microtensile bond strength (microTBS) values in the Er:YAG laser-prepared groups. In bur-prepared enamel, the group submitted to 12,000 TCs/6 months' WS (IID) showed a significant decrease in bond strength values when compared to the group stored in water for 24 h and not submitted to thermocycling (IIA), but values were statistically similar to those obtained in all Er:YAG laser groups and in the bur- prepared groups degraded with 500 TCs/1 week WS (IIB) or 2,000 TCs/1 month WS (IIC). It may be concluded that adhesion of an etch-and-rinse adhesive to Er:YAG laser-irradiated enamel was not affected by the methods used to simulate degradation of the adhesive interface and was similar to adhesion in the bur-prepared groups in all periods of water storage and thermocycling.

Precision ablation of dental enamel using a subpicosecond pulsed laser

In this study we report the use of ultra-short-pulsed near-infrared lasers for precision laser ablation of freshly extracted human teeth. The laser wavelength was approximately 800nm, with pulsewidths of 95 and 150fs, and pulse repetition rates of 1kHz. The laser beam was focused to an approximate diameter of 50microm and was scanned over the tooth surface. The rise in the intrapulpal temperature was monitored by embedded thermocouples, and was shown to remain below 5 degrees C when the tooth was air-cooled during laser treatment. The surface preparation of the ablated teeth, observed by optical and electron microscopy, showed no apparent cracking or heat effects, and the hardness and Raman spectra of the laser-treated enamel were not distinguishable from those of native enamel. This study indicates the potential for ultra-short-pulsed lasers to effect precision ablation of dental enamel.

Influence of energy and pulse repetition rate of Er:YAG laser on enamel ablation ability and morphological analysis of the laser-irradiated surface

OBJECTIVE

To assess the influence of energy and pulse repetition rate of Er:YAG laser on the enamel ablation ability and substrate morphology.

METHODS

Fifteen crowns of molars were sectioned in four fragments, providing 60 samples, which were ground to flatten the enamel surface. The initial mass was obtained by weighing the fragments. The specimens were hydrated for 1 h, fixed, and a 3-mm-diameter area was delimited. Twelve groups were randomly formed according to the combination of laser energies (200, 250, 300, or 350 mJ) and pulse repetition rates (2, 3, or 4 Hz). The final mass was obtained and mass loss was calculated by the difference between the initial and final mass. The specimens were prepared for SEM. Data were submitted to ANOVA and Scheffé test.

RESULTS

The 4 Hz frequency resulted in higher mass loss and was statistically different from 2 and 3 Hz (p < 0.05). The increase of frequency produced more melted areas, cracks, and unselective and deeper ablation. The 350 mJ energy promoted greater mass loss, similar to 300 mJ.

CONCLUSIONS

The pulse repetition rate influenced more intensively the mass loss and morphological alteration. Among the tested parameters, 350 mJ/3 Hz improved the ability of enamel ablation with less surface morphological alterations.