Low-molecular-weight heparin (LMWH)-loaded large porous PEG-PLGA particles for the treatment of asthma

A Review on Micro and Nanoengineering in Powder-Based Pulmonary Drug Delivery

Pulmonary delivery of drugs has emerged as a promising approach for the treatment of both lung and systemic diseases. Compared to other drug delivery routes, inhalation offers numerous advantages including high targeting, fewer side effects, and a huge surface area for drug absorption. However, the deposition of drugs in the lungs can be limited by lung defence mechanisms such as mucociliary and macrophages' clearance. Among the delivery devices, dry powder inhalers represent the optimal choice due to their stability, ease of use, and absence of propellants. In the last decades, several bottom-up techniques have emerged over traditional milling to produce inhalable powders. Among these techniques, the most employed ones are spray drying, supercritical fluid technology, spray freeze-drying, and thin film freezing. Inhalable dry powders can be constituted by micronized drugs attached to a coarse carrier (e.g., lactose) or drugs embedded into a micro- or nanoparticle. Particulate-based formulations are commonly composed of polymeric micro- and nanoparticles, liposomes, solid lipid nanoparticles, dendrimers, nanocrystals, extracellular vesicles, and inorganic nanoparticles. Moreover, engineered formulations including large porous particles, swellable microparticles, nano-in-microparticles, and effervescent nanoparticles have been developed. Particle engineering has also a crucial role in tuning the physical-chemical properties of both carrier-based and carrier-free inhalable powders. This approach can increase powder flowability, deposition, and targeting by customising particle surface features.

Application of PLGA as a Biodegradable and Biocompatible Polymer for Pulmonary Delivery of Drugs

Pulmonary administration of biodegradable polymeric formulation is beneficial in the treatment of various respiratory diseases. For respiratory delivery, the polymer must be non-toxic, biodegradable, biocompatible, and stable. Poly D, L-lactic-co-glycolic acid (PLGA) is a widely used polymer for inhalable formulations because of its attractive mechanical and processing characteristics which give great opportunities to pharmaceutical industries to formulate novel inhalable products. PLGA has many pharmaceutical applications and its biocompatible nature produces non-toxic degradation products. The degradation of PLGA takes place through the non-enzymatic hydrolytic breakdown of ester bonds to produce free lactic acid and glycolic acid. The biodegradation products of PLGA are eliminated in the form of carbon dioxide (CO₂) and water (H₂O) by the Krebs cycle. The biocompatible properties of PLGA are investigated in various in vivo and in vitro studies. The high structural integrity of PLGA particles provides better stability, excellent drug loading, and sustained drug release. This review provides detailed information about PLGA as an inhalable grade polymer, its synthesis, advantages, physicochemical properties, biodegradability, and biocompatible characteristics. The important formulation aspects that must be considered during the manufacturing of inhalable PLGA formulations and the toxicity of PLGA in the lungs are also discussed in this paper. Additionally, a thorough overview is given on the application of PLGA as a particulate carrier in the treatment of major respiratory diseases, such as cystic fibrosis, lung cancer, tuberculosis, asthma, and pulmonary hypertension.

Recent Advances in Nanomaterials for Asthma Treatment

Asthma is a chronic airway inflammatory disease with complex mechanisms, and these patients often encounter difficulties in their treatment course due to the heterogeneity of the disease. Currently, clinical treatments for asthma are mainly based on glucocorticoid-based combination drug therapy; however, glucocorticoid resistance and multiple side effects, as well as the occurrence of poor drug delivery, require the development of more promising treatments. Nanotechnology is an emerging technology that has been extensively researched in the medical field. Several studies have shown that drug delivery systems could significantly improve the targeting, reduce toxicity and improve the bioavailability of drugs. The use of multiple nanoparticle delivery strategies could improve the therapeutic efficacy of drugs compared to traditional delivery methods. Herein, the authors presented the mechanisms of asthma development and current therapeutic methods. Furthermore, the design and synthesis of different types of nanomaterials and micromaterials for asthma therapy are reviewed, including polymetric nanomaterials, solid lipid nanomaterials, cell membranes-based nanomaterials, and metal nanomaterials. Finally, the challenges and future perspectives of these nanomaterials are discussed to provide guidance for further research directions and hopefully promote the clinical application of nanotherapeutics in asthma treatment.

Oral inhalation for delivery of proteins and peptides to the lungs

Oral inhalation is the preferred route for delivery of small molecules to the lungs, because high tissue levels can be achieved shortly after application. Biologics are mainly administered by intravenous injection but inhalation might be beneficial for the treatment of lung diseases (e.g. asthma). This review discusses biological and pharmaceutical challenges for delivery of biologics and describes promising candidates. Insufficient stability of the proteins during aerosolization and the biological environment of the lung are the main obstacles for pulmonary delivery of biologics. Novel nebulizers will improve delivery by inducing less shear stress and administration as dry powder appears suitable for delivery of biologics. Other promising strategies include pegylation and development of antibody fragments, while carrier-encapsulated systems currently play no major role in pulmonary delivery of biologics for lung disease. While development of various biologics has been halted or has shown little effects, AIR DNase, alpha1-proteinase inhibitor, recombinant neuraminidase, and heparin are currently being evaluated in phase III trials. Several biologics are being tested for the treatment of coronavirus disease (COVID)-19, and it is expected that these trials will lead to improvements in pulmonary delivery of biologics.

Pulmonary siRNA delivery for lung disease: Review of recent progress and challenges

Lung diseases are a leading cause of mortality worldwide and there exists urgent need for new therapies. Approval of the first siRNA treatments in humans has opened the door for further exploration of this therapeutic strategy for other disease states. Pulmonary delivery of siRNA-based biopharmaceuticals offers the potential to address multiple unmet medical needs in lung-related diseases because of the specific physiology of the lung and characteristic properties of siRNA. Inhalation-based siRNA delivery designed for efficient, targeted delivery to specific cells within the lung holds great promise. Efficient delivery of siRNA directly to the lung, however, is relatively complex. This review focuses on the barriers that impact pulmonary siRNA delivery and successful recent approaches to advance this field forward. We focus on the pulmonary barriers that affect siRNA delivery, the disease-dependent pathological changes and their role in pulmonary disease and impact on siRNA delivery, as well as the recent development on the pulmonary siRNA delivery systems.

Nebulized Inhalation of Anti-Nerve Growth Factor Microspheres Inhibits Airway Remodeling in an Ovalbumin-Induced Rat Asthma Model

BACKGROUND

Airway remodeling is considered an important factor in refractory and uncontrollable asthma. Previous studies have confirmed that anti-nerve growth factor (NGF) antibody can ameliorate airway remodeling. However, whether nebulized inhalation of anti-NGF microspheres (NANM) can inhibit airway remodeling is not clear. The purpose of this study was to investigate the effects of NANM on ovalbumin (OVA)-induced airway remodeling, and the mechanisms involved.

METHODS

Anti-NGF microspheres were produced using a polymer alloy method. OVA was used to establish a rat model of asthma airway remodeling. Rats were treated with inhalation atomized anti-NGF antibody or NANM. Airway inflammation, airway reactivity, and airway remodeling were measured. Lung tissue P-Smad₃ and tumor growth factor (TGF)-β₁ mRNA and protein expression were also measured.

RESULTS

The anti-NGF antibody microsphere encapsulation rate was high, and the release time was long. NANM markedly attenuated OVA-induced airway remodeling, such as collagen deposition, average pulmonary resistance, the WAm/Pbm, WAt/Pbm, and Wcol/Pbm ratios (WAt, bronchial wall area; Pbm, perimeter of basement membrane; WAm, smooth muscle wall area; Wcol, airway collagen fiber area). Compared with the anti-NGF antibody group and the OVA group, the expression of TGF-β₁ mRNA, TGF-β₁ protein, and P-Smad₃ in the NANM group were markedly decreased.

CONCLUSIONS

NANM ameliorated OVA-induced airway remodeling, partly through regulation of the TGF-β₁/Smad₃ pathway.

Sulfated non-anticoagulant heparin blocks Th2-induced asthma by modulating the IL-4/signal transducer and activator of transcription 6/Janus kinase 1 pathway

BACKGROUND

The efficacy of heparins and low-MW-heparins (LMWH) against human asthma has been known for decades. However, the clinical utility of these compounds has been hampered by their anticoagulant properties. Much effort has been put into harnessing the anti-inflammatory properties of LMWH but none have been used as therapy for asthma. Sulfated-non-anticoagulant heparin (S-NACH) is an ultra-LMWH with no systemic anticoagulant effects.

OBJECTIVE

The present study explored the potential of S-NACH in blocking allergic asthma and examined the potential mechanism by which it exerts its effects.

METHODS

Acute and chronic ovalbumin-based mouse models of asthma, splenocytes, and a lung epithelial cell line were used. Mice were challenged with aerosolized ovalbumin and administered S-NACH or saline 30 min after each ovalbumin challenge.

RESULTS

Sulfated-non-anticoagulant heparin administration in mice promoted a robust reduction in airway eosinophilia, mucus production, and airway hyperresponsiveness even after chronic repeated challenges with ovalbumin. Such effects were linked to suppression of Th2 cytokines IL-4/IL-5/IL-13/GM-CSF and ovalbumin-specific IgE without any effect on IFN-γ. S-NACH also reduced lung fibrosis in mice that were chronically-exposed to ovalbumin. These protective effects of S-NACH may be attributed to modulation of the IL-4/JAK1 signal transduction pathway through an inhibition of STAT6 phosphorylation and a subsequent inhibition of GATA-3 and inducible NO synthase expression. The effect of the drug on STAT6 phosphorylation coincided with a reduction in JAK1 phosphorylation upon IL-4 treatment. The protective effects of S-NACH treatment was associated with reduction of the basal expression of the two isoforms of arginase ARG1 and ARG2 in lung epithelial cells.

CONCLUSIONS

Our study demonstrates that S-NACH constitutes an opportunity to benefit from the well-known anti-asthma properties of heparins/LMWH while bypassing the risk of bleeding. Our results show, for the first time, that such anti-asthma effects may be associated with reduction of the IL-4/JAK1/STAT6 pathway.

Low-Molecular-Weight Heparins: Reduced Size Particulate Systems for Improved Therapeutic Outcomes

A wide range of diseases have been treated using low-molecular-weight heparins (LMWHs), the drug of choice for anticoagulation. Owing to their better pharmacokinetic features compared to those of unfractionated heparin (uFH), several systems incorporating LMWHs have been investigated to deliver and improve their therapeutic outcomes, especially through development of their micro- and nano-particles. This review article describes current perspectives on the fabrication, characterization, and application of LMWHs-loaded micro- and nano-particles to achieve ameliorated bioavailability. The valuable applications of LMWH will continue to encourage researchers to identify efficient delivery systems that have specific release characteristics and ameliorated bioavailability, overcoming the challenges presented by biological obstructions and the physicochemical properties of LMWHs.

Drug delivery to the lungs: challenges and opportunities

Pulmonary drug delivery is relatively complex because the respiratory tract has evolved defense mechanisms to keep inhaled drug particles out of the lungs and to remove or inactivate them once deposited. In addition to these mechanical, chemical and immunological barriers, pulmonary drug delivery is adversely affected by the behavioral barriers of poor adherence and poor inhaler technique. Strategies to mitigate the effects of these barriers include use of inhaler devices and formulations that deliver drug to the lungs efficiently, appropriate inhaler technique and improved education of patients. Owing to the advantages offered by the pulmonary route, the challenges that the route poses are worth addressing, and if successfully addressed, the pulmonary route offers huge opportunities, often fulfilling unmet clinical needs.

Inhaled Heparin: Therapeutic Efficacy and Recent Formulations

Heparin is well known for its anticoagulant and anti-inflammatory properties. Inhaled heparin regimens are increasingly being used to manage lung disease. It has been used to treat cystic fibrosis, thromboembolism, and pulmonary fibrosis, as well as bronchial asthma and asthma-induced airway hypersensitivity. Several preclinical studies attained some useful effects of heparin-administered, parenterally and through inhalation, treatment of lung disease. Besides, recent clinical trials suggest that inhaled heparin for lung diseases is beneficial and safe, but such data remain to be limited. In 2005, the orphan designation was granted by the European Commission for heparin sodium (inhalation use) for the treatment of cystic fibrosis. The positive results of heparin in the pulmonary route necessitate a focus on the preparation and evaluation of heparin in advanced drug delivery systems, namely nano/microparticles and liposomes. Through this pulmonary delivery, heparin is protected from enzymatic degradation within the airway. Heparin is thus passively targeted into the lungs, and long-lasting localized treatment is achieved. On the other hand, these systems have encountered several problems as follows: (1) polymers, such as poly-L-lactide-glycolic acid, poly (lactic acid), and chitosan, used to prepare heparin-loaded microparticle/nanoparticle (MP/NP) systems have not been granted approval for lung application by the FDA and (2) liposomal and NP formulation stability is the main problem of formulation design. We propose that additional in vitro and in vivo research is necessary to assess the clinical applicability of this treatment strategy. The present article discusses heparin treatments for lung diseases and the use of heparin and/or heparin-loaded drugs in advanced delivery systems through the pulmonary route.

Low-Molecular-Weight Heparin-Coated and Montelukast-Filled Inhalable Particles: A Dual-Drug Delivery System for Combination Therapy in Asthma

Montelukast, a cysteinyl leukotriene type 1 receptor antagonist, exhibits secondary anti-inflammatory properties when used at higher concentrations. Low-molecular-weight heparin (LMWH) evokes pronounced anti-inflammatory effects by interrupting leukocyte adhesion and migration. We hypothesized that inhalable particles containing montelukast plus LMWH release both drugs in a sustained fashion and protect the lungs against allergen-induced inflammation. Large porous particles of montelukast and LMWH were prepared using a double-emulsion-solvent-evaporation method. Montelukast was first encapsulated in copolymer-based particles using polyethylenimine as a porosigen; the resulting particles were then coated with LMWH. The particles were evaluated for physicochemical properties, respirability, and release profiles. The anti-inflammatory effect of the optimized formulation was studied in ovalbumin-sensitized asthmatic Sprague Dawley rats. The optimized large porous particles had a diameter of 10.3 ± 0.7 μm, exhibited numerous surface indentations and pores, showed acceptable drug entrapment efficiency (66.8% ± 0.4% for montelukast; 91.7% ± 0.8% adsorption efficiency for LMWH), demonstrated biphasic release patterns, and escaped the uptake by the rat alveolar macrophages. The number of infiltrating inflammatory cells in asthmatic rat lungs, treated with dual-drug particles, was >74% fewer than in untreated asthmatic rat lungs. Similarly, the airway walls of asthmatic animals treated with dual-drug particles were 3-fold thinner than those of untreated asthmatic animals (p < 0.001). The optimized formulation protects lungs against methacholine-induced airway hyper-reactivity. Overall, this study demonstrates the feasibility of loading 2 drugs, montelukast and LMWH, into an inhalable particulate system and establishes that this novel combination therapy produces sustained drug release and elicits a robust anti-inflammatory response in the lungs.

Development of subcutaneous sustained release nanoparticles encapsulating low molecular weight heparin

The objective of the present research work was to prepare and evaluate sustained release subcutaneous (s.c.) nanoparticles of low molecular weight heparin (LMWH). The nanoparticles were prepared by water–in-oil in-water (w/o/w) emulsion and evaporation method using different grades of polylactide co-glycolide (50:50, 85:15), and different concentrations of polyvinyl alcohol (0.1%, 0.5%, 1%) aqueous solution as surfactant. The fabricated nanoparticles were evaluated for size, shape, zeta potential, encapsulation efficiency, in vitro drug release, and in vivo biological activity (anti-factor Xa activity) using the standard kit. The drug and excipient compatibility was analyzed by Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC) and X-ray diffraction (XRD) studies. The formation of nanoparticles was confirmed by scanning electron microscopy; nanoparticles were spherical in shape. The size of prepared nanoparticles was found between 195 nm and 251 nm. The encapsulation efficiency of the nanoparticles was found between 46% and 70%. In vitro drug, release was about 16–38% for 10 days. In vivo drug, release shows the sustained release of drug for 10 days in rats. FTIR studies indicated that there was no loss in chemical integrity of the drug upon fabrication into nanoparticles. DSC and XRD results demonstrated that the drug was changed from the crystalline form to the amorphous form in the formulation during the fabrication process. The results of this study revealed that the s.c. nanoparticles were suitable candidates for sustained delivery of LMWH.

Development of voriconazole loaded large porous particles for inhalation delivery: effect of surface forces on aerosolisation performance, assessment of in vitro safety potential and uptake by macrophages

Inhalation delivery of voriconazole loaded large porous particles represent an effective and safe way to prolong pulmonary residence of voriconazole.