A structure-activity relationship study for 2'-deoxyadenosine analogs at A9 position in the catalytic core of 10-23 DNAzyme for rate enhancement

A close-looped DNAzyme walker with an available catalytic domain for electrochemiluminescent detection of acetamiprid

Traditional DNA walkers face enormous challenges due to limited biostability and reaction kinetics. Herein, we designed a self-driven close-looped DNAzyme walker (cl-DW) with high structural biostability and catalytic activity that enabled rapid electrochemiluminescence (ECL) detection of pesticide residue acetamiprid. Specifically, cl-DW exhibited increasing ability to resist nuclease degradation with a 570-fold longer half-degradation time than that of the single-stranded DNAzyme walker (ss-DW) due to the protected DNA terminal. Furthermore, cl-DW achieved high catalytic activity with a 4.3-fold faster reaction kinetic than that of ss-DW due to the circularized nanostructure of an available catalytic domain. Consequently, we utilized cl-DW as a signal amplifier and tin-based sulfide (SnS2) nanoflowers as ECL emitters to construct an ECL aptasensor, which realized the sensitive detection of acetamiprid with a limit of detection of 0.85 nM. This work provides a reliable approach to exploring DNA walkers with high catalytic activity and better biostability for molecular monitoring.

A combination of the modified catalytic core and conjugation of 3'-inverted deoxythymidine for a more efficient and nuclease-resistant 10-23 DNAzyme

10-23 DNAzyme is a catalytic DNA molecule capable of cleaving complementary RNA. Its high cleavage efficiency is being pursued by chemical modifications, for realizing its genetic therapeutics potential. The most efficient and nuclease-resistant DNAzyme was obtained in this study combined two modifications - 7-aminopropyl-8-aza-7-deaza-2'-deoxyadenosine (residue 1) at A9 and 3'-inverted deoxythymidine residue (ⁱT) at 3'-end. Moreover, this combinatorial modification could be a universal approach for designing efficient and enzyme-resistant 10-23 DNAzyme against other RNA targets, and the catalytic core-modification could be further combined with other recognition arm modifications for practical applications as genetic therapeutics and biosensor tools.

A new Pb2+-specific DNAzyme by revisiting the catalytic core of 10-23 DNAzyme

10-23 DNAzyme is a catalytic DNA molecule from in vitro selection, the 15-mer catalytic core was investigated for more DNAzyme variants by block deletions. DNAzyme DZM01 was selected with metal ion dependence of Pb²⁺ ≫ Mn²⁺, with no activity in the presence of Mg²⁺ (20 mM), Ca²⁺ (20 mM), Zn²⁺ (20 mM, pH 6). The unique binding properties of Pb²⁺ with nucleic acids might be responsible for the formation of the catalytic core, which is different from that of other divalent metal ions. More DNAzyme variants are expected to be derived for specific metal ion dependence by various nucleobase sequences and modifications.

Molecular Features and Metal Ions That Influence 10-23 DNAzyme Activity

Deoxyribozymes (DNAzymes) with RNA hydrolysis activity have a tremendous potential as gene suppression agents for therapeutic applications. The most extensively studied representative is the 10-23 DNAzyme consisting of a catalytic loop and two substrate binding arms that can be designed to bind and cleave the RNA sequence of interest. The RNA substrate is cleaved between central purine and pyrimidine nucleotides. The activity of this DNAzyme in vitro is considerably higher than in vivo, which was suggested to be related to its divalent cation dependency. Understanding the mechanism of DNAzyme catalysis is hindered by the absence of structural information. Numerous biological studies, however, provide comprehensive insights into the role of particular deoxynucleotides and functional groups in DNAzymes. Here we provide an overview of the thermodynamic properties, the impact of nucleobase modifications within the catalytic loop, and the role of different metal ions in catalysis. We point out features that will be helpful in developing novel strategies for structure determination and to understand the mechanism of the 10-23 DNAzyme. Consideration of these features will enable to develop improved strategies for structure determination and to understand the mechanism of the 10-23 DNAzyme. These insights provide the basis for improving activity in cells and pave the way for developing DNAzyme applications.

Enhancing Catalytic Activity of Uranyl-Dependent DNAzyme by Flexible Linker Insertion for More Sensitive Detection of Uranyl Ion

The uranyl-dependent DNAzyme 39E cleaves its nucleic acid substrate in the presence of uranyl ion (UO₂²⁺). It has been widely utilized in many sensor designs for selective and sensitive detection of UO₂²⁺ in the environment and inside live cells. In this work, by inserting a flexible linker (C3 Spacer) into one critical site (A₂₀) of the 39E catalytic core, we successfully enhanced the original catalytic activity of 39E up to 8.1-fold at low UO₂²⁺ concentrations. Applying such a modified DNAzyme (39E-A₂₀-C3) in a label-free fluorescent sensor for UO₂²⁺ detection achieved more than 1 order of magnitude sensitivity enhancement over using native 39E, with the UO₂²⁺ detection limit improved from 2.6 nM (0.63 ppb) to 0.19 nM (0.047 ppb), while the high selectivity to UO₂²⁺ over other metal ions was fully preserved. The method was also successfully applied for the detection of UO₂²⁺-spiked environmental water samples to demonstrate its practical usefulness.

Conformational studies of 10-23 DNAzyme in solution through pyrenyl-labeled 2'-deoxyadenosine derivatives

10-23 DNAzyme is a small catalytic DNA molecule. Studies on its conformation in solution are critical for understanding its catalytic mechanism and functional optimization. Based on our previous research, two fluorescent nucleoside analogues 1 and 2 were designed for the introduction of a pyrenyl group at one of the five dA residues in the catalytic core and the unpaired adenosine residue in its full-DNA substrate, respectively. Ten pyrenyl-pyrenyl pairs are formed in the DNAzyme-substrate complexes in solution for sensing the spacial positions of the five dA residues relative to the cleavage site using fluorescence spectra. The position-dependent quenching effect of pyrene emission fluorescence by nucleobases, especially the pyrenyl-pyrenyl interaction, was observed for some positions. The adenine residues in the 3'-part of the catalytic loop seem to be closer to the cleavage site than the adenine residues in the 5'-part, which is consistent with the molecular dynamics simulation result. The catalytic activities and T_m changes also confirmed the effect of the pyrenyl-nucleobase and pyrenyl-pyrenyl pair interactions. Together with functional group mutations, catalytically relevant nucleobases will be identified for understanding the catalytic mechanism of 10-23 DNAzyme.

Synthesis, crystallization and preliminary crystallographic analysis of a 52-nucleotide DNA/2'-OMe-RNA oligomer mimicking 10-23 DNAzyme in the complex with a substrate

A 52-nucleotide DNA/2'-OMe-RNA oligomer mimicking 10-23 DNAzyme in the complex with its substrate was synthesized, purified and crystallized by the hanging-drop method using 0.8 M sodium potassium tartrate as a precipitant. A data set to 1.21 Å resolution was collected from a monocrystal at 100 K using synchrotron radiation on a beamline BL14.1 at BESSY. The crystal belonged to the P2₁ group with unit-cell a = 49.42, b = 24.69, c = 50.23, β = 118.48.

Studies on the preferred uracil-adenine base pair at the cleavage site of 10-23 DNAzyme by functional group modifications on adenine

10-23 DNAzyme is capable of catalytically cleaving RNA substrates with the preferred cleavage sites rAU and rGU, in which the common base pair U-dA0 forms between the substrate and the DNAzyme in the cleavage reaction. Here its conservation was studied with base modifications on dA and extra functional groups introduced. The nitrogen atom at 7- or 8-position of adenine was demonstrated to be equally important for the cleavage reaction, although it is not related to the thermal stability of the base pair. Deletion of 6-amino group led to decreased stability of the base pair and a slight slower reaction rate. Extra functional groups through 6-amino group were not favorably accommodated in the cleavage site. From these modifications at the level of functional groups, it demonstrated that the base pair U-dA0 not only contributes to the recognition and binding stability, but also it is involved in the active catalytic center by its functional groups and base stacking. This kind of chemical modifications with 7-substituted 8-aza-7-deaza-2'-deoxyadenosine at dA0 is favorable for the introduction of signal molecules for mechanistic studies and biological applications, without significant loss of the catalytic function and structural destruction.

Enhancement of deoxyribozyme activity by cationic copolymers

A cationic copolymer enhanced DNAzyme activity.

Position-specific modification with imidazolyl group on10-23 DNAzyme realized catalytic activity enhancement

Nucleoside analogues with imidazolyl and histidinyl groups were synthesized for site-specific modification on the catalytic core of 10-23 DNAzyme. The distinct position-dependent effect of imidazolyl group was observed. Positive effect at A9 position was always observed. The pH- and Mg(2+)-dependence of the imidazolyl-modified DNAzymes suggested that imidazolyl group in 10-23 DNAzyme probably plays a dual role, its hydrogen bonding ability and spacial occupation play the favorable influence on the catalytic conformation of the modified DNAzymes. This research demonstrated that the catalytic performance of DNAzymes could be enhanced by incorporation of additional functional groups. Chemical modification is a feasible approach toward more efficient DNAzymes for therapeutic and biotechnological applications.