Reduced differentiation efficiency of murine embryonic stem cells in stirred suspension bioreactors

Absence of E2f1 Negates Pro-osteogenic Impacts of p21 Absence

Loss of p21 leads to increased bone formation post-injury; however, the mechanism(s) by which this occurs remains undetermined. E2f1 is downstream of p21 and as a transcription factor can act directly on gene expression; yet it is unknown if E2f1 plays a role in the osteogenic effects observed when p21 is differentially regulated. In this study we aimed to investigate the interplay between p21 and E2f1 and determine if the pro-regenerative osteogenic effects observed with the loss of p21 are E2f1 dependent. To accomplish this, we employed knockout p21 and E2f1 mice and additionally generated a p21/E2f1 double knockout. These mice underwent burr-hole injuries to their proximal tibiae and healing was assessed over 7 days via microCT imaging. We found that p21 and E2f1 play distinct roles in bone regeneration where the loss of p21 increased trabecular bone formation and loss of E2f1 increased cortical bone formation, yet loss of E2f1 led to poorer bone repair overall. Furthermore, when E2f1 was absent, either individually or simultaneously with p21, there was a dramatic decrease of the number of osteoblasts, osteoclasts, and chondrocytes at the site of injury compared to p21-/- and C57BL/6 mice. Together, these results suggest that E2f1 regulates the cell populations required for bone repair and has a distinct role in bone formation/repair compared to p21-/-E2f1-/-. These results highlight the possibility of cell cycle and/or p21/E2f1 being potential druggable targets that could be leveraged in clinical therapies to improve bone healing in pathologies such as osteoporosis.

Exogenously delivered iPSCs disrupt the natural repair response of endogenous MPCs after bone injury

Promoting bone healing including fracture non-unions are promising targets for bone tissue engineering due to the limited success of current clinical treatment methods. There has been significant research on the use of stem cells with and without biomaterial scaffolds to treat bone fractures due to their promising regenerative capabilities. However, the relative roles of exogenous vs. endogenous stem cells and their overall contribution to in vivo fracture repair is not well understood. The purpose of this study was to determine the interaction between exogenous and endogenous stem cells during bone healing. This study was conducted using a standardized burr-hole bone injury model in a mesenchymal progenitor cell (MPC) lineage-tracing mouse under normal homeostatic and osteoporotic conditions. Burr-hole injuries were treated with a collagen-I biomaterial loaded with and without labelled induced pluripotent stem cells (iPSCs). Using lineage-tracing, the roles of exogenous and endogenous stem cells during bone healing were examined. It was observed that treatment with iPSCs resulted in muted healing compared to untreated controls in intact mice post-injury. When the cell populations were examined histologically, iPSC-treated burr-hole defects presented with a dramatic reduction in endogenous MPCs and cell proliferation throughout the injury site. However, when the ovaries were removed and an osteoporotic-like phenotype induced in the mice, iPSCs treatment resulted in increased bone formation relative to untreated controls. In the absence of iPSCs, endogenous MPCs demonstrated robust proliferative and osteogenic capacity to undertake repair and this behaviour was disrupted in the presence of iPSCs which instead took on an osteoblast fate but with little proliferation. This study clearly demonstrates that exogenously delivered cell populations can impact the normal function of endogenous stem/progenitor populations during the normal healing cascade. These interactions need to be better understood to inform cell and biomaterial therapies to treat fractures.

Multicellular Liver Organoids: Generation and Importance of Diverse Specialized Cellular Components

Over 40,000 patients in the United States are estimated to suffer from end-stage liver disease and acute hepatic failure, for which liver transplantation is the only available therapy. Human primary hepatocytes (HPH) have not been employed as a therapeutic tool due to the difficulty in growing and expanding them in vitro, their sensitivity to cold temperatures, and tendency to dedifferentiate following two-dimensional culture. The differentiation of human-induced pluripotent stem cells (hiPSCs) into liver organoids (LO) has emerged as a potential alternative to orthotropic liver transplantation (OLT). However, several factors limit the efficiency of liver differentiation from hiPSCs, including a low proportion of differentiated cells capable of reaching a mature phenotype, the poor reproducibility of existing differentiation protocols, and insufficient long-term viability in vitro and in vivo. This review will analyze various methodologies being developed to improve hepatic differentiation from hiPSCs into liver organoids, paying particular attention to the use of endothelial cells as supportive cells for their further maturation. Here, we demonstrate why differentiated liver organoids can be used as a research tool for drug testing and disease modeling, or employed as a bridge for liver transplantation following liver failure.

The Proliferation of Pre-Pubertal Porcine Spermatogonia in Stirred Suspension Bioreactors Is Partially Mediated by the Wnt/β-Catenin Pathway

Male survivors of childhood cancer are at risk of suffering from infertility in adulthood because of gonadotoxic chemotherapies. For adult men, sperm collection and preservation are routine procedures prior to treatment; however, this is not an option for pre-pubertal children. From young boys, a small biopsy may be taken before chemotherapy, and spermatogonia may be propagated in vitro for future transplantation to restore fertility. A robust system that allows for scalable expansion of spermatogonia within a controlled environment is therefore required. Stirred suspension culture has been applied to different types of stem cells but has so far not been explored for spermatogonia. Here, we report that pre-pubertal porcine spermatogonia proliferate more in bioreactor suspension culture, compared with static culture. Interestingly, oxygen tension provides an avenue to modulate spermatogonia status, with culture under 10% oxygen retaining a more undifferentiated state and reducing proliferation in comparison with the conventional approach of culturing under ambient oxygen levels. Spermatogonia grown in bioreactors upregulate the Wnt/ β-catenin pathway, which, along with enhanced gas and nutrient exchange observed in bioreactor culture, may synergistically account for higher spermatogonia proliferation. Therefore, stirred suspension bioreactors provide novel platforms to culture spermatogonia in a scalable manner and with minimal handling.

Fluid shear stress promotes embryonic stem cell pluripotency via interplay between β-catenin and vinculin in bioreactor culture

The expansion of pluripotent stem cells (PSCs) as aggregates in stirred suspension bioreactors is garnering attention as an alternative to adherent culture. However, the hydrodynamic environment in the bioreactor can modulate PSC behavior, pluripotency and differentiation potential in ways that need to be well understood. In this study, we investigated how murine embryonic stem cells (mESCs) sense fluid shear stress and modulate a noncanonical Wnt signaling response to promote pluripotency. mESCs showed higher expression of pluripotency marker genes, Oct4, Sox2, and Nanog in the absence of leukemia inhibitory factor (LIF) in stirred suspension bioreactors compared to adherent culture, a phenomenon we have termed mechanopluripotency. In bioreactor culture, fluid shear promoted the nuclear translocation of the less well-known pluripotency regulator β-catenin and concomitant increase of c-Myc expression, an upstream regulator of Oct4, Sox2, and Nanog. We also observed similar β-catenin nuclear translocation in LIF-free mESCs cultured on E-cadherin substrate under defined fluid shear stress conditions in flow chamber plates. mESCs showed lower shear-induced expression of pluripotency marker genes when β-catenin was inhibited, suggesting that β-catenin signaling is crucial to mESC mechanopluripotency. Key to this process is vinculin, which is known to rearrange and associate more strongly with adherens junctions in response to fluid shear. When the vinculin gene is disrupted, we observe that nuclear β-catenin translocation and mechanopluripotency are abrogated. Our results indicate that mechanotransduction through the adherens junction complex is important for mESC pluripotency maintenance.

Absence of Proteoglycan 4 (Prg4) Leads to Increased Subchondral Bone Porosity Which Can Be Mitigated Through Intra-Articular Injection of PRG4

Proteoglycan 4 (PRG4) is a mucin-like glycoprotein important for joint health. Mice lacking Prg4 demonstrate degeneration of the cartilage and altered skeletal morphology. The purpose of this study was to examine if Prg4 deficiency leads to subchondral bone defects and if these defects could be mitigated through intra-articular injection of recombinant human PRG4 (rhPRG4). Mice deficient in Prg4 expression demonstrated increased cartilage thickness and increased subchondral bone porosity compared with C57BL/6 controls. While the porosity of the subchondral bone of Prg4^-/- mice decreased over time with maturation, intra-articular injection of rhPRG4 was able to forestall the increase in porosity. In contrast, neither hyaluronan (HA) nor methylprednisolone injections had beneficial effects on the subchondral bone porosity in the Prg4 knockout mice. Bone marrow progenitor cells from Prg4^-/- mice demonstrated reduced osteogenic differentiation capacity at 4 weeks of age, but not at 16 weeks of age. While most studies on PRG4/lubricin focus on the health of the cartilage, this study demonstrates that PRG4 plays a role in the maturation of the subchondral bone. Furthermore, increasing joint lubrication/viscosupplementation through injection of HA or controlling joint inflammation through injection of methylprednisolone may help maintain the cartilage surface, but had no positive effect on the subchondral bone in animals lacking Prg4. Therefore, alterations in the subchondral bone in models with absent or diminished Prg4 expression should not be overlooked when investigating changes within the articular cartilage regarding the pathogenesis of osteoarthritis/arthrosis. © 2019 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 37:2077-2088, 2019.

Using computational fluid dynamics (CFD) modeling to understand murine embryonic stem cell aggregate size and pluripotency distributions in stirred suspension bioreactors

Computational fluid dynamics (CFD) modeling can be applied to understand hydrodynamics in stirred suspension bioreactors, which can in turn affect cell viability, proliferation, pluripotency and differentiation. In this study, we developed a CFD model to determine the effects of average shear rates and turbulent eddies on the formation and growth of murine embryonic stem cell aggregates. We found a correlation between average eddy size and aggregate size, which depended on bioreactor agitation rates. By relating these computational and biological variables, CFD modeling can predict optimal agitation rates to grow embryonic stem cell aggregates in stirred suspension bioreactors. To examine the effect of hydrodynamics on pluripotency, mESCs cultured in bioreactors under various agitation rates were tested for SSEA-1, Sox-2, and Nanog expression. Cells maintained a minimum of 95% positive expression with no change in the intensity distribution pattern between the different bioreactor conditions. This indicates that the average level of pluripotency marker expression is independent of changes in the hydrodynamic profile and resulting aggregate size distribution. The findings here can be further extended to other cell types that grow as aggregates in stirred suspension bioreactors and offer important insights necessary to realize cell therapies.

Determining Osteogenic Differentiation Efficacy of Pluripotent Stem Cells by Telomerase Activity

Background

Bone tissue engineering based on pluripotent stem cells (PSCs) is a new approach to deal with bone defects. Protocols have been developed to generate osteoblasts from PSCs. However, the low efficiency of this process is still an important issue that needs to be resolved. Many studies have aimed to improve efficiency, but developing accurate methods to determine efficacy is also critical. Studies using pluripotency to estimate efficacy are rare. Telomerase is highly associated with pluripotency.

Methods

We have described a quantitative method to measure telomerase activity, telomeric repeat elongation assay based on quartz crystal microbalance (QCM). To investigate whether this method could be used to determine the efficiency of in vitro osteogenic differentiation based on pluripotency, we measured the pluripotency pattern of cultures through stemness gene expression, proliferation ability and telomerase activity, measured by QCM.

Results

We showed that the pluripotency pattern determined by QCM was similar to the patterns of proliferation ability and gene expression, which showed a slight upregulation at the late stages, within the context of the general downregulation tendency during differentiation. Additionally, a comprehensive gene expression pattern covering nearly every stage of differentiation was identified.

Conclusion

Therefore, this assay may be powerful tools for determining the efficiency of differentiation systems based on pluripotency. In this study, we not only introduce a new method for determining efficiency based on pluripotency, but also provide more information about the characteristics of osteogenic differentiation which help facilitate future development of more efficient protocols.

p21-/- mice exhibit enhanced bone regeneration after injury

Background

p21^{(WAF1/CIP1/SDI1)}, a cyclin dependent kinase inhibitor has been shown to influence cell proliferation, differentiation and apoptosis; but more recently, p21 has been implicated in tissue repair. Studies on p21(^−/−) knockout mice have demonstrated results that vary from complete regeneration and healing of tissue to attenuated healing. There have however been no studies that have evaluated the role of p21 inhibition in bone healing and remodeling.

Methods

The current study employs a burr-hole fracture model to investigate bone regeneration subsequent to an injury in a p21^−/− mouse model. p21^−/− and C57BL/6 mice were subjected to a burr-hole fracture on their proximal tibia, and their bony parameters were measured over 4 weeks via in vivo μCT scanning.

Results

p21^−/− mice present with enhanced healing from week 1 through week 4. Differences in bone formation and resorption potential between the two mouse models are assessed via quantitative and functional assays. While the μCT analysis indicates that p21^−/− mice have enhanced bone healing capabilities, it appears that the differences observed may not be due to the function of osteoblasts or osteoclasts. Furthermore, no differences were observed in the differentiation of progenitor cells (mesenchymal or monocytic) into osteoblasts or osteoclasts respectively.

Conclusions

Therefore, it remains unknown how p21 is regulating enhanced fracture repair and further studies are required to determine which cell type(s) are responsible for this regenerative phenotype.

Electronic supplementary material

The online version of this article (10.1186/s12891-017-1790-z) contains supplementary material, which is available to authorized users.

Microfabric Vessels for Embryoid Body Formation and Rapid Differentiation of Pluripotent Stem Cells

Various scalable three-dimensional culture systems for regenerative medicine using human induced pluripotent stem cells (hiPSCs) have been developed to date. However, stable production of hiPSCs with homogeneous qualities still remains a challenge. Here, we describe a novel and simple embryoid body (EB) formation system using unique microfabricated culture vessels. Furthermore, this culture system is useful for high throughput EB formation and rapid generation of differentiated cells such as neural stem cells (NSCs) from hiPSCs. The period of NSC differentiation was significantly shortened under high EB density culture conditions. Simultaneous mass production of a pure population of NSCs was possible within 4 days. These results indicate that the novel culture system might not only become a unique tool to obtain new insights into developmental biology based on human stem cells, but also provide an important tractable platform for efficient and stable production of NSCs for clinical applications.

Inter-microcarrier transfer and phenotypic stability of stem cell-derived Schwann cells in stirred suspension bioreactor culture

Emerging bioreactor technologies offer an effective way for scaled-up production of large numbers of cells for cell therapy applications. One of the clinical paradigms where cell therapy can be an asset is restorative neurosciences. Nerve repair can benefit from the injections of stem cells and/or Schwann cells, acting as a source for axon myelination, myelin debris clearance, and trophic support. We have adapted microcarrier-based suspension bioreactor culture for Schwann cells (SCs) differentiated from a new stem cell source - skin-derived precursors (SKPs). SKP-derived SCs attach and grow on different types of microcarriers in both static and stirred culture, with Cytodex 3 and CultiSpher-S found most effective. Inter-microcarrier migration of SKP-SCs represents a key mechanism for rapid expansion and colonization in stirred suspension culture. We have shown that microcarrier-expanded SKP-SCs cells express Schwann cell markers p75-NTR, GFAP and S100 and retain their key ability to myelinate axons both in vitro and in vivo. Scaled-up microcarrier-based production of SKP-SCs in suspension bioreactors appears feasible for timely generation of sufficient cell numbers for nerve repair strategies.

Generation of scaffoldless hyaline cartilaginous tissue from human iPSCs

Defects in articular cartilage ultimately result in loss of joint function. Repairing cartilage defects requires cell sources. We developed an approach to generate scaffoldless hyaline cartilage from human induced pluripotent stem cells (hiPSCs). We initially generated an hiPSC line that specifically expressed GFP in cartilage when teratoma was formed. We optimized the culture conditions and found BMP2, transforming growth factor β1 (TGF-β1), and GDF5 critical for GFP expression and thus chondrogenic differentiation of the hiPSCs. The subsequent use of scaffoldless suspension culture contributed to purification, producing homogenous cartilaginous particles. Subcutaneous transplantation of the hiPSC-derived particles generated hyaline cartilage that expressed type II collagen, but not type I collagen, in immunodeficiency mice. Transplantation of the particles into joint surface defects in immunodeficiency rats and immunosuppressed mini-pigs indicated that neocartilage survived and had potential for integration into native cartilage. The immunodeficiency mice and rats suffered from neither tumors nor ectopic tissue formation. The hiPSC-derived cartilaginous particles constitute a viable cell source for regenerating cartilage defects.

•

We established hiPSCs that express EGFP in chondrocytes when differentiated

•

We developed a method for generating scaffoldless hyaline cartilage from hiPSCs

•

The hiPSC-derived neocartilage integrated into adjacent native articular cartilage

•

The hiPSC-derived cartilage produced neither tumors nor ectopic tissue in vivo

Formation of well-defined embryoid bodies from dissociated human induced pluripotent stem cells using microfabricated cell-repellent microwell arrays

A simple, scalable, and reproducible technology that allows direct formation of large numbers of homogeneous and synchronized embryoid bodies (EBs) of defined sizes from dissociated human induced pluripotent stem cells (hiPSCs) was developed. Non-cell-adhesive hydrogels were used to create round-bottom microwells to host dissociated hiPSCs. No Rho-associated kinase inhibitor (ROCK-i), or centrifugation was needed and the side effects of ROCK-i can be avoided. The key requirement for the successful EB formation in addition to the non-cell-adhesive round-bottom microwells is the input cell density per microwell. Too few or too many cells loaded into the microwells will compromise the EB formation process. In parallel, we have tested our microwell-based system for homogeneous hEB formation from dissociated human embryonic stem cells (hESCs). Successful production of homogeneous hEBs from dissociated hESCs in the absence of ROCK-i and centrifugation was achieved within an optimal range of input cell density per microwell. Both the hiPSC- and hESC-derived hEBs expressed key proteins characteristic of all the three developmental germ layers, confirming their EB identity. This novel EB production technology may represent a versatile platform for the production of homogeneous EBs from dissociated human pluripotent stem cells (hPSCs).

Measuring dissolved oxygen to track erythroid differentiation of hematopoietic progenitor cells in culture

As stem cell technologies move from the developmental to the commercial stage strategies must be developed to monitor culture operations. These will ensure consistency of differentiation programs and maintenance of optimum cell viability during production runs. Due to the sensitivity of stem cells to their environment, and their variability in response to external stimuli, accurate monitoring of in vitro conditions will be crucial for effective large-scale culturing of therapeutic stem cells. Here we describe a simple method to monitor the expansion and maturation of adult human haematopoietic stem/progenitor cells into red blood cells in vitro by measuring the oxygen consumption rate of cultures. Cell cultures followed a characteristic pattern of oxygen consumption that is reflective of in vivo erythroid maturation. This method could be easily developed as an online system to map erythroid differentiation and maturation of cultured cells as effectively as the more time consuming process of flow cytometric analysis of surface marker expression patterns.

Embryonic stem cell therapy improves bone quality in a model of impaired fracture healing in the mouse; tracked temporally using in vivo micro-CT

In the current study, we used an estrogen-deficient mouse model of osteoporosis to test the efficacy of a cell-generated bone tissue construct for bone augmentation of an impaired healing fracture. A reduction in new bone formation at the defect site was observed in ovariectomized fractures compared to the control group using repeated measures in vivo micro-computed tomography (μCT) imaging over 4 weeks. A significant increase in the bone mineral density (BMD), trabecular bone volume ratio, and trabecular number, thickness and connectivity were associated with fracture repair in the control group, whereas the fractured bones of the ovariectomized mice exhibited a loss in all of these parameters (p<0.001). In a separate group, ovariectomized fractures were treated with murine embryonic stem (ES) cell-derived osteoblasts loaded in a three-dimensional collagen I gel and recovery of the bone at the defect site was observed. A significant increase in the trabecular bone volume ratio (p<0.001) and trabecular number (p<0.01) was observed by 4 weeks in the fractures treated with cell-loaded collagen matrix compared to those treated with collagen I alone. The stem cell-derived osteoblasts were identified at the fracture site at 4 weeks post-implantation through in situ hybridization histochemistry. Although this cell tracking method was effective, the formation of an ectopic cellular nodule adjacent to the knee joints of two mice suggested that alternative in vivo cell tracking methods should be employed in order to definitively assess migration of the implanted cells. To our knowledge, this study is the first of its kind to examine the efficacy of stem cell therapy for fracture repair in an osteoporosis-related fracture model in vivo. The findings presented provide novel insight into the use of stem cell therapies for bone injuries.

Dendritic cells derived from pluripotent stem cells: Potential of large scale production

Human pluripotent stem cells (hPSCs), including human embryonic stem cells and human induced pluripotent stem cells, are promising sources for hematopoietic cells due to their unlimited growth capacity and the pluripotency. Dendritic cells (DCs), the unique immune cells in the hematopoietic system, can be loaded with tumor specific antigen and used as vaccine for cancer immunotherapy. While autologous DCs from peripheral blood are limited in cell number, hPSC-derived DCs provide a novel alternative cell source which has the potential for large scale production. This review summarizes recent advances in differentiating hPSCs to DCs through the intermediate stage of hematopoietic stem cells. Step-wise growth factor induction has been used to derive DCs from hPSCs either in suspension culture of embryoid bodies (EBs) or in co-culture with stromal cells. To fulfill the clinical potential of the DCs derived from hPSCs, the bioprocess needs to be scaled up to produce a large number of cells economically under tight quality control. This requires the development of novel bioreactor systems combining guided EB-based differentiation with engineered culture environment. Hence, recent progress in using bioreactors for hPSC lineage-specific differentiation is reviewed. In particular, the potential scale up strategies for the multistage DC differentiation and the effect of shear stress on hPSC differentiation in bioreactors are discussed in detail.

Improving embryonic stem cell expansion through the combination of perfusion and Bioprocess model design

BACKGROUND

High proliferative and differentiation capacity renders embryonic stem cells (ESCs) a promising cell source for tissue engineering and cell-based therapies. Harnessing their potential, however, requires well-designed, efficient and reproducible expansion and differentiation protocols as well as avoiding hazardous by-products, such as teratoma formation. Traditional, standard culture methodologies are fragmented and limited in their fed-batch feeding strategies that afford a sub-optimal environment for cellular metabolism. Herein, we investigate the impact of metabolic stress as a result of inefficient feeding utilizing a novel perfusion bioreactor and a mathematical model to achieve bioprocess improvement.

METHODOLOGY/PRINCIPAL FINDINGS

To characterize nutritional requirements, the expansion of undifferentiated murine ESCs (mESCs) encapsulated in hydrogels was performed in batch and perfusion cultures using bioreactors. Despite sufficient nutrient and growth factor provision, the accumulation of inhibitory metabolites resulted in the unscheduled differentiation of mESCs and a decline in their cell numbers in the batch cultures. In contrast, perfusion cultures maintained metabolite concentration below toxic levels, resulting in the robust expansion (>16-fold) of high quality 'naïve' mESCs within 4 days. A multi-scale mathematical model describing population segregated growth kinetics, metabolism and the expression of selected pluripotency ('stemness') genes was implemented to maximize information from available experimental data. A global sensitivity analysis (GSA) was employed that identified significant (6/29) model parameters and enabled model validation. Predicting the preferential propagation of undifferentiated ESCs in perfusion culture conditions demonstrates synchrony between theory and experiment.

CONCLUSIONS/SIGNIFICANCE

The limitations of batch culture highlight the importance of cellular metabolism in maintaining pluripotency, which necessitates the design of suitable ESC bioprocesses. We propose a novel investigational framework that integrates a novel perfusion culture platform (controlled metabolic conditions) with mathematical modeling (information maximization) to enhance ESC bioprocess productivity and facilitate bioprocess optimization.

Engineering stem cell niches in bioreactors

Stem cells, including embryonic stem cells, induced pluripotent stem cells, mesenchymal stem cells and amniotic fluid stem cells have the potential to be expanded and differentiated into various cell types in the body. Efficient differentiation of stem cells with the desired tissue-specific function is critical for stem cell-based cell therapy, tissue engineering, drug discovery and disease modeling. Bioreactors provide a great platform to regulate the stem cell microenvironment, known as "niches", to impact stem cell fate decision. The niche factors include the regulatory factors such as oxygen, extracellular matrix (synthetic and decellularized), paracrine/autocrine signaling and physical forces (i.e., mechanical force, electrical force and flow shear). The use of novel bioreactors with precise control and recapitulation of niche factors through modulating reactor operation parameters can enable efficient stem cell expansion and differentiation. Recently, the development of microfluidic devices and microbioreactors also provides powerful tools to manipulate the stem cell microenvironment by adjusting flow rate and cytokine gradients. In general, bioreactor engineering can be used to better modulate stem cell niches critical for stem cell expansion, differentiation and applications as novel cell-based biomedicines. This paper reviews important factors that can be more precisely controlled in bioreactors and their effects on stem cell engineering.

Nanotopographical cues augment mesenchymal differentiation of human embryonic stem cells

The production of bone-forming osteogenic cells for research purposes or transplantation therapies remains a significant challenge. Using planar polycarbonate substrates lacking in topographical cues and substrates displaying a nanotopographical pattern, mesenchymal differentiation of human embryonic stem cells is directed in the absence of chemical factors and without induction of differentiation by embryoid body formation. Cells incubated on nanotopographical substrates show enhanced expression of mesenchymal or stromal markers and expression of early osteogenic progenitors at levels above those detected in cells on planar substrates in the same basal media. Evidence of epithelial-to-mesenchymal transition during substrate differentiation and DNA methylation changes akin to chemical induction are also observed. These studies provide a suitable approach to overcome regenerative medical challenges and describe a defined, reproducible platform for human embryonic stem cell differentiation.

Gene expression profile and functionality of ESC-derived Lin-ckit+Sca-1+ cells are distinct from Lin-ckit+Sca-1+ cells isolated from fetal liver or bone marrow

In vitro bioreactor-based cultures are being extensively investigated for large-scale production of differentiated cells from embryonic stem cells (ESCs). However, it is unclear whether in vitro ESC-derived progenitors have similar gene expression profiles and functionalities as their in vivo counterparts. This is crucial in establishing the validity of ESC-derived cells as replacements for adult-isolated cells for clinical therapies. In this study, we compared the gene expression profiles of Lin-ckit+Sca-1+ (LKS) cells generated in vitro from mouse ESCs using either static or bioreactor-based cultures, with that of native LKS cells isolated from mouse fetal liver (FL) or bone marrow (BM). We found that in vitro-generated LKS cells were more similar to FL- than to BM LKS cells in gene expression. Further, when compared to cells derived from bioreactor cultures, static culture-derived LKS cells showed fewer differentially expressed genes relative to both in vivo LKS populations. Overall, the expression of hematopoietic genes was lower in ESC-derived LKS cells compared to cells from BM and FL, while the levels of non-hematopoietic genes were up-regulated. In order to determine if these molecular profiles correlated with functionality, we evaluated ESC-derived LKS cells for in vitro hematopoietic-differentiation and colony formation (CFU assay). Although static culture-generated cells failed to form any colonies, they did differentiate into CD11c+ and B220+ cells indicating some hematopoietic potential. In contrast, bioreactor-derived LKS cells, when differentiated under the same conditions failed to produce any B220+ or CD11c+ cells and did not form colonies, indicating that these cells are not hematopoietic progenitors. We conclude that in vitro culture conditions significantly affect the transcriptome and functionality of ESC-derived LKS cells and although in vitro differentiated LKS cells were lineage negative and expressed both ckit and Sca-1, these cells, especially those obtained from dynamic cultures, are significantly different from native cells of the same phenotype.

Hydrodynamic modulation of pluripotent stem cells

Controlled expansion and differentiation of pluripotent stem cells (PSCs) using reproducible, high-throughput methods could accelerate stem cell research for clinical therapies. Hydrodynamic culture systems for PSCs are increasingly being used for high-throughput studies and scale-up purposes; however, hydrodynamic cultures expose PSCs to complex physical and chemical environments that include spatially and temporally modulated fluid shear stresses and heterogeneous mass transport. Furthermore, the effects of fluid flow on PSCs cannot easily be attributed to any single environmental parameter since the cellular processes regulating self-renewal and differentiation are interconnected and the complex physical and chemical parameters associated with fluid flow are thus difficult to independently isolate. Regardless of the challenges posed by characterizing fluid dynamic properties, hydrodynamic culture systems offer several advantages over traditional static culture, including increased mass transfer and reduced cell handling. This article discusses the challenges and opportunities of hydrodynamic culture environments for the expansion and differentiation of PSCs in microfluidic systems and larger-volume suspension bioreactors. Ultimately, an improved understanding of the effects of hydrodynamics on the self-renewal and differentiation of PSCs could yield improved bioprocessing technologies to attain scalable PSC culture strategies that will probably be requisite for the development of therapeutic and diagnostic applications.

Assessment of the efficacy of MRI for detection of changes in bone morphology in a mouse model of bone injury

PURPOSE

To determine whether magnetic resonance imaging (MRI) could be used to track changes in skeletal morphology during bone healing using high-resolution micro-computed tomography (μCT) as a standard. We used a mouse model of bone injury to compare μCT with MRI.

MATERIALS AND METHODS

Surgery was performed to induce a burr hole fracture in the mouse tibia. A selection of biomaterials was immediately implanted into the fractures. First we optimized the imaging sequences by testing different MRI pulse sequences. Then changes in bone morphology over the course of fracture repair were assessed using in vivo MRI and μCT. Histology was performed to validate the imaging outcomes.

RESULTS

The rapid acquisition with relaxation enhancement (RARE) sequence provided sufficient contrast between bone and the surrounding tissues to clearly reveal the fracture. It allowed detection of the fracture clearly 1 and 14 days postsurgery and revealed soft tissue changes that were not clear on μCT. In MRI and μCT the fracture was seen at day 1 and partial healing was detected at day 14.

CONCLUSION

The RARE sequence was the most suitable for MRI bone imaging. It enabled the detection of hard and even soft tissue changes. These findings suggest that MRI could be an effective imaging modality for assessing changes in bone morphology and pathobiology.

Embryonic stem cells incorporate into newly formed bone and do not form tumors in an immunocompetent mouse fracture model

Embryonic stem (ES) cells are a uniquely self-renewing, pluripotent population of cells that must be differentiated before being useful for cell therapy. Since most studies utilize subcutaneous implantation to test the in vivo functionality of ES cell-derived cells, the objective of the current study was to develop an appropriate and clinically relevant in vivo implantation system in which the behavior and tumorigenicity of ES cell-derived cells could be effectively tested in a tissue-specific (orthotopic) site. Male ES cells were differentiated either into osteoblasts or chondrocytes using protocols that were previously developed and published by our laboratory. The differentiated cells were implanted into a burr-hole fracture created in the proximal tibiae of immunocompetent female mice, strain matched to the ES cell line. The ability of the differentiated ES cell-derived cells (bearing the Y chromosome) to incorporate into the newly formed bone was assessed by micro-computed tomography imaging and histochemistry. ES cells differentiated with either osteogenic or chondrogenic medium supplementation formed a soft tissue mass that disrupted the normal bone architecture by 4 weeks after implantation in some mice. In contrast, mice receiving osteoblastic cells that were differentiated in a three-dimensional type 1 collagen gel showed evidence of new bone formation at the defect site without evidence of tumor formation for up to 8 weeks after implantation. In this injury model, type 1 collagen is more effective than medium supplementation at driving more complete differentiation of ES cells, as evidenced by reducing their tumorigenicity. Overall, the current study emphasizes the importance of using an appropriate orthotopic implantation system to effectively test the behavior and tumorigenicity of the cells in vivo.

From cell culture to a cure: pancreatic β-cell replacement strategies for diabetes mellitus

Numerous advances have been made in pancreatic β-cell replacement therapies for diabetes mellitus. While these therapies provide a positive impact and possible cure for the individual recipient, access is limited by availability of donor tissues. The derivation of pluripotent stem cells using efficient differentiation technologies has resulted in the generation of insulin-producing cells with characteristics similar to islet β-cells. Experimental transplantation studies have shown that these cells are capable of reducing hyperglycemia in short-term assays. Novel methodologies that facilitate the neogenesis of β-cells from endogenous hepatic or pancreatic tissue sources are also being investigated as a β-cell replacement strategy. Further research is necessary to protect these transplanted or regenerated cells from diabetic autoimmune pathology.

Shear stress influences the pluripotency of murine embryonic stem cells in stirred suspension bioreactors

Pluripotent embryonic stem cells (ESCs) have been used increasingly in research as primary material for various tissue-engineering applications. Pluripotency, or the ability to give rise to all cells of the body, is an important characteristic of ESCs. Traditional methods use leukaemia inhibitory factor (LIF) to maintain murine embryonic stem cell (mESC) pluripotency in static and bioreactor cultures. When LIF is removed from mESCs in static cultures, pluripotency genes are downregulated and the cultures will spontaneously differentiate. Recently we have shown the maintenance of pluripotency gene expression of mESCs in stirred suspension bioreactors during differentiation experiments in the absence of LIF. This is undesired in a differentiation experiment, where the goal is downregulation of pluripotency gene expression and upregulation of gene expression characteristic to the differentiation. Thus, the objective of this study was to examine how effectively different levels of shear stress [100 rpm (6 dyne/cm(2) ), 60 rpm (3 dyne/cm(2) )] maintained and influenced pluripotency in suspension bioreactors. The pluripotency markers Oct-4, Nanog, Sox-2 and Rex-1 were assessed using gene expression profiles and flow-cytometry analysis and showed that shear stress does maintain and influence the gene expression of certain pluripotency markers. Some significant differences between the two levels of shear stress were seen and the combination of shear stress and LIF was observed to synergistically increase the expression of certain pluripotency markers. Overall, this study provides a better understanding of the environmental conditions within suspension bioreactors and how these conditions affect the pluripotency of mESCs.

Derivation of iPSCs in stirred suspension bioreactors

Induced pluripotent stem cells (iPSCs) are typically derived in adherent culture. Here we report fast and efficient derivation of mouse iPSCs in stirred suspension bioreactors, with and without the use of c-Myc. Suspension-reprogrammed cells expressed pluripotency markers, showed multilineage differentiation in vitro and in vivo, and contributed to the germline in chimeric mice. Suspension reprogramming has the potential to accelerate and standardize iPSC research.

Three-dimensional multipotent progenitor cell aggregates for expansion, osteogenic differentiation and 'in vivo' tracing with AAV vector serotype 6

Multipotent adult progenitor cells (MAPC) are bone marrow-derived stem cells with a high growth rate suitable for therapeutical applications as three-dimensional (3D) aggregates. Combined applications of osteogenically differentiated MAPC (OD-MAPC) aggregates and adeno-associated viral vectors (AAV) in bone bioengineering are still deferred until information regarding expansion technologies, osteogenic potential, and AAV cytotoxicity and transduction efficiency is better understood. In this study, we tested whether self-complementary AAV (scAAV) can potentially be used as a gene delivery system in a OD-MAPC-based “in vivo” bone formation model in the craniofacial region. Both expansion of rat MAPC (rMAPC) and osteogenic differentiation with dexamethasone were also tested in 3D aggregate culture systems “in vitro” and “vivo”. Rat MAPCs (rMAPCs) grew as undifferentiated aggregates for 4 days with a population doubling time of 37h. After expansion, constant levels of Oct4 transcripts, and Oct4 and CD31 surface markers were observed, which constitute a hallmark of rMAPCs undifferentiated stage. Dexamethasone effectively mediated rMAPC osteogenic differentiation by inducing the formation of a mineralized collagen type I network, and facilitated the activation of the wnt/β-catenin, a crucial pathway in skeletal development. To investigate the genetic modification of rMAPCs grown as 3D aggregates prior to implantation, scAAV serotypes 2, 3, and 6 were evaluated. scAAV6 packaged with the enhanced green fluorescent protein expression cassette efficiently mediated long-term transduction (10 days) “in vitro” and “vivo”. The reporter transduction event allowed the tracing of OD-rMAPC (induced by dexamethasone) aggregates following OD-rMAPC transfer into a macro-porous hydroxyapatite scaffold implanted in a rat calvaria model. Furthermore, the scAAV6-transduced OD-rMAPC generated a bone-like matrix with a collagenous matrix rich in bone specific proteins (osteocalcin and osteopontin) in the scaffold macro-pores 10 days post-implantation. Newly formed bone was also observed in the interface between native bone and scaffold. The collective work supports future bone tissue engineering applications of 3D MAPC cultures for expansion, bone formation, and the ability to genetically alter these cells using scAAV vectors.

Engineered MSCs from Patient-Specific iPS Cells

Mesenchymal stroma/stem cells (MSCs) represent a heterogenic cell population that can be isolated from various tissues of the body or can be generated from pluripotent stem cells by in vitro differentiation. Various promising pre-clinical and clinical studies suggest that MSCs might stimulate endogenous regeneration and/or act as anti-inflammatory agents, which could be of high therapeutic relevance for a number of diseases, including graft-versus-host disease after allogeneic hematopoietic stem cell transplantation, inflammatory bowel diseases, or some forms of liver failure. Notably, conflicting results of various studies illustrated that the source of MSCs, the cultivation condition, and the way of administration have important effects on the desired clinical effect. Some of the involved molecular pathways have recently been elucidated and an artificial modulation of these pathways by engineered MSCs might result in superfunctional MSCs for enhanced endogenous regeneration or anti-inflammatory response. In this review, we summarize important findings of conventional MSCs for applications in gastroenterology and we describe the state-of-the-art for the generation of patient-derived iPS cells that eventually might provide genetically engineered superfunctional iPS cells for advanced cell therapies.

Impact of stirred suspension bioreactor culture on the differentiation of murine embryonic stem cells into cardiomyocytes

Background

Embryonic stem cells (ESCs) can proliferate endlessly and are able to differentiate into all cell lineages that make up the adult organism. Under particular in vitro culture conditions, ESCs can be expanded and induced to differentiate into cardiomyocytes in stirred suspension bioreactors (SSBs). However, in using these systems we must be cognizant of the mechanical forces acting upon the cells. The effect of mechanical forces and shear stress on ESC pluripotency and differentiation has yet to be clarified. The purpose of this study was to investigate the impact of the suspension culture environment on ESC pluripotency during cardiomyocyte differentiation.

Results

Murine D3-MHC-neo^r ESCs formed embyroid bodies (EBs) and differentiated into cardiomyocytes over 25 days in static culture and suspension bioreactors. G418 (Geneticin) was used in both systems from day 10 to enrich for cardiomyocytes by eliminating non-resistant, undifferentiated cells. Treatment of EBs with 1 mM ascorbic acid and 0.5% dimethyl sulfoxide from day 3 markedly increased the number of beating EBs, which displayed spontaneous and cadenced contractile beating on day 11 in the bioreactor. Our results showed that the bioreactor differentiated cells displayed the characteristics of fully functional cardiomyocytes. Remarkably, however, our results demonstrated that the bioreactor differentiated ESCs retained their ability to express pluripotency markers, to form ESC-like colonies, and to generate teratomas upon transplantation, whereas the cells differentiated in adherent culture lost these characteristics.

Conclusions

This study demonstrates that although cardiomyocyte differentiation can be achieved in stirred suspension bioreactors, the addition of medium enhancers is not adequate to force complete differentiation as fluid shear forces appear to maintain a subpopulation of cells in a transient pluripotent state. The development of successful ESC differentiation protocols within suspension bioreactors demands a more complete understanding of the impacts of shear forces on the regulation of pluripotency and differentiation in pluripotent stem cells.

Concise review: induced pluripotent stem cells and lineage reprogramming: prospects for bone regeneration

Bone tissue for transplantation therapies is in high demand in clinics. Osteodegenerative diseases, in particular, osteoporosis and osteoarthritis, represent serious public health issues affecting a respectable proportion of the elderly population. Furthermore, congenital indispositions from the spectrum of craniofacial malformations such as cleft palates and systemic disorders including osteogenesis imperfecta are further increasing the need for bone tissue. Additionally, the reconstruction of fractured bone elements after accidents and the consumption of bone parts during surgical tumor excisions represent frequent clinical situations with deficient availability of healthy bone tissue for therapeutic transplantations. Epigenetic reprogramming represents a powerful technology for the generation of healthy patient-specific cells to replace or repair diseased or damaged tissue. The recent generation of induced pluripotent stem cells (iPSCs) is probably the most promising among these approaches dominating the literature of current stem cell research. It allows the generation of pluripotent stem cells from adult human skin cells from which potentially all cell types of the human body could be obtained. Another technique to produce clinically interesting cell types is direct lineage reprogramming (LR) with the additional advantage that it can be applied directly in vivo to reconstitute a damaged organ. Here, we want to present the two technologies of iPSCs and LR, to outline the current states of research, and to discuss possible strategies for their implementation in bone regeneration.

Expansion and long-term maintenance of induced pluripotent stem cells in stirred suspension bioreactors

Induced pluripotent stem cells (iPSCs) can provide an important source of cells for the next-generation of cell therapies in regenerative medicine, in part due to their similarity to embryonic stem cells (ESCs). Patient-specific iPSCs represent an opportunity for autologous cell therapies that are not restricted by immunological, ethical and technical obstacles. One of the technical hurdles that must be overcome before iPSCs can be clinically implemented is the scalable, reproducible production of iPSCs and their differentiated progeny. All of the iPSC lines established thus far have been generated and expanded with static tissue culture protocols, which are time-consuming and suffer from batch-to-batch variability. Alternatively, stirred suspension bioreactors propose several benefits and their homogeneous culture environment facilitates the large-scale expansion required for clinical studies at less cost. We have previously developed protocols for expanding murine and human ESCs as undifferentiated aggregates in stirred suspension bioreactors. The resulting cells were karyotypically normal, expressed pluripotency markers and could be differentiated into all three germ lineages, both in vitro and in vivo. In this study, we demonstrate that stirred suspension bioreactors yield 58-fold expansion of undifferentiated pluripotent iPSCs over 4 days. In vitro differentiation into cartilage, bone and cardiomyocytes lineages, in addition to in vivo teratoma formation, further confirmed the existence of fully functional and undifferentiated pluripotent iPSC aggregates following long-term passaging. Stirred suspension bioreactor culture represents an efficient process for the large-scale expansion and maintenance of iPSCs, which is an important first step in their clinical application.

Large-scale production of murine embryonic stem cell-derived osteoblasts and chondrocytes on microcarriers in serum-free media

The generation of tissue-engineered constructs from stem cells for the treatment of musculoskeletal diseases may have immense impact in regenerative medicine, but there are difficulties associated with stem cell culture and differentiation, including the use of serum. Here we present serum-free protocols for the successful production of murine embryonic stem cell (mESC) derived osteoblasts and chondrocytes on CultiSpher S macroporous microcarriers in stirred suspension bioreactors. Various inoculum forms and agitation rates were investigated. Produced osteogenic cells were implanted ectopically into SCID mice and orthotopically into a murine burr-hole fracture model. Osterix, osteocalcin and collagen type I were upregulated in osteogenic cultures, while aggrecan and collagen type II were upregulated in chondrogenic cultures. Histological analysis using alizarin red S, von Kossa and alcian blue staining confirmed the presence of osteoblasts and chondrocytes, respectively in cultured microcarriers and excised tissue. Finally, implantation of derived cells into a mouse fracture model revealed cellular integration without any tumor formation. Overall, microcarriers may provide a supportive scaffold for ESC expansion and differentiation in a serum-free bioprocess for in vivo implantation. These findings lay the groundwork for the development of clinical therapies for musculoskeletal injuries and diseases using hESCs and iPS cells.

The multiparametric effects of hydrodynamic environments on stem cell culture

Stem cells possess the unique capacity to differentiate into many clinically relevant somatic cell types, making them a promising cell source for tissue engineering applications and regenerative medicine therapies. However, in order for the therapeutic promise of stem cells to be fully realized, scalable approaches to efficiently direct differentiation must be developed. Traditionally, suspension culture systems are employed for the scale-up manufacturing of biologics via bioprocessing systems that heavily rely upon various types of bioreactors. However, in contrast to conventional bench-scale static cultures, large-scale suspension cultures impart complex hydrodynamic forces on cells and aggregates due to fluid mixing conditions. Stem cells are exquisitely sensitive to environmental perturbations, thus motivating the need for a more systematic understanding of the effects of hydrodynamic environments on stem cell expansion and differentiation. This article discusses the interdependent relationships between stem cell aggregation, metabolism, and phenotype in the context of hydrodynamic culture environments. Ultimately, an improved understanding of the multifactorial response of stem cells to mixed culture conditions will enable the design of bioreactors and bioprocessing systems for scalable directed differentiation approaches.

Embryonic stem cells for osteo-degenerative diseases

Current orthopedic practice to treat osteo-degenerative diseases, such as osteoporosis, calls for antiresorptive therapies and anabolic bone medications. In some cases, surgery, in which metal rods are inserted into the bones, brings symptomatic relief. As these treatments may ameliorate the symptoms, but cannot cure the underlying dysregulation of the bone, the orthopedic field seems ripe for regenerative therapies using transplantation of stem cells. Stem cells bring with them the promise of completely curing a disease state, as these are the cells that normally regenerate tissues in a healthy organism. This chapter assembles reports that have successfully used stem cells to generate osteoblasts, osteoclasts, and chondrocytes - the cells that can be found in healthy bone tissue - in culture, and review and collate studies about animal models that were employed to test the function of these in vitro "made" cells. A particular emphasis is placed on embryonic stem cells, the most versatile of all stem cells. Due to their pluripotency, embryonic stem cells represent the probably most challenging stem cells to bring into the clinic, and therefore, the associated problems are discussed to put into perspective where the field currently is and what we can expect for the future.

Microenvironment modulates osteogenic cell lineage commitment in differentiated embryonic stem cells

Background

Due to their self-renewal, embryonic stem cells (ESCs) are attractive cells for applications in regenerative medicine and tissue engineering. Although ESC differentiation has been used as a platform for generating bone in vitro and in vivo, the results have been unsatisfactory at best. It is possible that the traditional culture methods, which have been used, are not optimal and that other approaches must be explored.

Methodology/Principal Findings

ESCs were differentiated into osteoblast lineage using a micro-mass approach. In response to osteogenic differentiation medium, many cells underwent apoptosis, while others left the micro-mass, forming small aggregates in suspension. These aggregates were cultured in three different culture conditions (adhesion, static suspension, and stirred suspension), then examined for osteogenic potential in vitro and in vivo. In adhesion culture, ESCs primed to become osteoblasts recommitted to the adipocyte lineage in vitro. In a static suspension culture, resulting porous aggregates expressed osteoblasts markers and formed bone in vivo via intermembranous ossification. In a stirred suspension culture, resulting non-porous aggregates suppressed osteoblast differentiation in favor of expanding progenitor cells.

Conclusions/Significance

We demonstrate that microenvironment modulates cell fate and subsequent tissue formation during ESC differentiation. For effective tissue engineering using ESCs, it is important to develop optimized cell culture/differentiation conditions based upon the influence of microenvironment.

Embryoid body formation from embryonic and induced pluripotent stem cells: Benefits of bioreactors

Embryonic stem (ES) cells have the ability to differentiate into all germ layers, holding great promise not only for a model of early embryonic development but also for a robust cell source for cell-replacement therapies and for drug screening. Embryoid body (EB) formation from ES cells is a common method for producing different cell lineages for further applications. However, conventional techniques such as hanging drop or static suspension culture are either inherently incapable of large scale production or exhibit limited control over cell aggregation during EB formation and subsequent EB aggregation. For standardized mass EB production, a well defined scale-up platform is necessary. Recently, novel scenario methods of EB formation in hydrodynamic conditions created by bioreactor culture systems using stirred suspension systems (spinner flasks), rotating cell culture system and rotary orbital culture have allowed large-scale EB formation. Their use allows for continuous monitoring and control of the physical and chemical environment which is difficult to achieve by traditional methods. This review summarizes the current state of production of EBs derived from pluripotent cells in various culture systems. Furthermore, an overview of high quality EB formation strategies coupled with systems for in vitro differentiation into various cell types to be applied in cell replacement therapy is provided in this review. Recently, new insights in induced pluripotent stem (iPS) cell technology showed that differentiation and lineage commitment are not irreversible processes and this has opened new avenues in stem cell research. These cells are equivalent to ES cells in terms of both self-renewal and differentiation capacity. Hence, culture systems for expansion and differentiation of iPS cells can also apply methodologies developed with ES cells, although direct evidence of their use for iPS cells is still limited.