In Vivo Osteogenic Differentiation of Rat Bone Marrow Stromal Cells in Thermosensitive MPEG–PCL Diblock Copolymer Gels

Bioactive Materials for Bone Regeneration: Biomolecules and Delivery Systems

Novel tissue regeneration strategies are constantly being developed worldwide. Research on bone regeneration is noteworthy, as many promising new approaches have been documented with novel strategies currently under investigation. Innovative biomaterials that allow the coordinated and well-controlled repair of bone fractures and bone loss are being designed to reduce the need for autologous or allogeneic bone grafts eventually. The current engineering technologies permit the construction of synthetic, complex, biomimetic biomaterials with properties nearly as good as those of natural bone with good biocompatibility. To ensure that all these requirements meet, bioactive molecules are coupled to structural scaffolding constituents to form a final product with the desired physical, chemical, and biological properties. Bioactive molecules that have been used to promote bone regeneration include protein growth factors, peptides, amino acids, hormones, lipids, and flavonoids. Various strategies have been adapted to investigate the coupling of bioactive molecules with scaffolding materials to sustain activity and allow controlled release. The current manuscript is a thorough survey of the strategies that have been exploited for the delivery of biomolecules for bone regeneration purposes, from choosing the bioactive molecule to selecting the optimal strategy to synthesize the scaffold and assessing the advantages and disadvantages of various delivery strategies.

Body-Shaping Membrane to Regenerate Breast Fat by Elastic Structural Holding

Tissue regeneration requires structural holding and movement support using tissue-type-specific aids such as bone casts, skin bandages, and joint protectors. Currently, an unmet need exists in aiding breast fat regeneration as the breast moves following continuous body motion by exposing the breast fat to dynamic stresses. Here, the concept of elastic structural holding is applied to develop a shape-fitting moldable membrane for breast fat regeneration ("adipoconductive") after surgical defects are made. The membrane has the following key characteristics: (a) It contains a panel of honeycomb structures, thereby efficiently handling motion stress through the entire membrane; (b) a strut is added into each honeycomb in a direction perpendicular to gravity, thereby suppressing the deformation and stress concentration upon lying and standing; and (c) thermo-responsive moldable elastomers are used to support structural holding by suppressing large deviations of movement that occur sporadically. The elastomer became moldable upon a temperature shift above T_m. The structure can then be fixed as the temperature decreases. As a result, the membrane promotes adipogenesis by activating mechanotransduction in a fat miniature model with pre-adipocyte spheroids under continuous shaking in vitro and in a subcutaneous implant placed on the motion-prone back areas of rodents in vivo.

Application of Bone Marrow-Derived Mesenchymal Stem Cells for Muscle Healing After Contusion Injury in Mice

BACKGROUND

Skeletal muscle injuries are very common in sports medicine. Conventional therapies have limited clinical efficacy. New treatment methods should be developed to allow athletes to return to play with better function.

PURPOSE

To evaluate the in vitro differentiation potential of bone marrow-derived mesenchymal stem cells and the in vivo histologic and physiologic effects of mesenchymal stem cell therapy on muscle healing after contusion injury.

STUDY DESIGN

Controlled laboratory study.

METHODS

Bone marrow cells were flushed from both femurs of 5-week-old C57BL/6 mice to establish immortalized mesenchymal stem cell lines. A total of 36 mice aged 8 to 10 weeks were used to develop a muscle contusion model and were divided into 6 groups (6 mice/group) on the basis of the different dosages of IM2 cells to be injected (0, 1.25 × 10⁵, and 2.5 × 10⁵ cells with/without F-127 in 100 μL of phosphate-buffered saline). Histological analysis of muscle regeneration was performed, and the fast-twitch and tetanus strength of the muscle contractions was measured 28 days after muscle contusion injury, after injections of different doses of mesenchymal stem cells with or without the F-127 scaffold beginning 14 days after contusion injury.

RESULTS

The mesenchymal stem cell-treated muscles exhibited numerous regenerating myofibers. All the groups treated with mesenchymal stem cells (1.25 × 10⁵ cells, 2.5 × 10⁵ cells, 1.25 × 10⁵ cells plus F-127, and 2.5 × 10⁵ cells plus F-127) exhibited a significantly higher number of regenerating myofibers (mean ± SD: 111.6 ± 14.77, 133.4 ± 21.44, 221.89 ± 32.65, and 241.5 ± 25.95, respectively) as compared with the control group and the control with F-127 (69 ± 18.79 and 63.2 ± 18.98). The physiologic evaluation of fast-twitch and tetanus strength did not reveal differences between the age-matched uninjured group and the groups treated with various doses of mesenchymal stem cells 28 days after contusion. Significant differences were found between the control group and the groups treated with various doses of mesenchymal stem cells after muscle contusion.

CONCLUSION

Mesenchymal stem cell therapy increased the number of regenerating myofibers and improved fast-twitch and tetanus muscle strength in a mouse model of muscle contusion. However, the rapid decay of transplanted mesenchymal stem cells suggests a paracrine effect of this action. Treatment with mesenchymal stem cells at various doses combined with the F-127 scaffold is a potential therapy for a muscle contusion.

CLINICAL RELEVANCE

Mesenchymal stem cell therapy has an effect on sports medicine because of its effects on myofiber regeneration and muscle strength after contusion injury.

Self-Assemblable Polymer Smart-Blocks for Temperature-Induced Injectable Hydrogel in Biomedical Applications

Self-assembled temperature-induced injectable hydrogels fabricated via self-assembly of polymer smart-blocks have been widely investigated as drug delivery systems and platforms for tissue regeneration. Polymer smart-blocks that can be self-assembly play an important role in fabrication of hydrogels because they can self-assemble to induce the gelation of their copolymer in aqueous solution. The self-assembly occurs in response to an external stimulus change, such as temperature, pH, glucose, ionic strength, light, magnetic field, electric field, or their combination, which results in property transformations like hydrophobicity, ionization, and conformational change. The self-assembly smart-block based copolymers exist as a solution in aqueous media at certain conditions that are suitable for mixing with bioactive molecules and/or cells. However, this solution turns into a hydrogel due to the self-assembly of the smart-blocks under exposure to an external stimulus change in vitro or injection into the living body for a controllable release of loaded bioactive molecules or serving as a biomaterial scaffold for tissue regeneration. This work reports current scenery in the development of these self-assembly smart-blocks for fabrication of temperature-induced injectable physically cross-linked hydrogels and their potential application as drug delivery systems and platforms for tissue engineering.

Recent advances in the design of injectable hydrogels for stem cell-based therapy

The recent advances in the design of injectable hydrogels for stem cell delivery, especially for in vivo applications, are overviewed in this review.

Efficacy of Poly(D,L-Lactic Acid-co-Glycolic acid)-Poly(Ethylene Glycol)-Poly(D,L-Lactic Acid-co-Glycolic Acid) Thermogel As a Barrier to Prevent Spinal Epidural Fibrosis in a Postlaminectomy Rat Model

STUDY DESIGN

Experimental animal study.

OBJECTIVE

The authors conducted a study to determine the efficacy and safety of the poly(D,L-lactic acid-co-glycolic acid)-poly(ethylene glycol)-poly(D,L-lactic acid-co-glycolic acid) (PLGA-PEG-PLGA) thermogel to prevent peridural fibrosis in an adult rat laminectomy model.

SUMMARY OF BACKGROUND DATA

Peridural fibrosis often occurs after spinal laminectomy. It might cause persistent back and/or leg pain postoperatively and make a reoperation more difficult and dangerous. Various materials have been used to prevent epidural fibrosis, but only limited success has been achieved.

MATERIALS AND METHODS

The PLGA-PEG-PLGA thermogel was synthesized by us. Total L3 laminectomies were performed on 24 rats. The PLGA-PEG-PLGA thermogel or chitosan (CHS) gel (a positive control group) was applied to the operative sites in a blinded manner. In the control group, the L3 laminectomy was performed and the defect was irrigated with the NS solution 3 times. All the rats were killed 4 weeks after the surgery.

RESULTS

The cytotoxicity of this thermogel was evaluated in vitro and the result demonstrated that no evidence of cytotoxicity was observed. The extent of epidural fibrosis, the area of epidural fibrosis, and the density of the fibroblasts and blood vessel were evaluated histologically. There were statistical differences among the PLGA-PEG-PLGA thermogel or CHS gel group compared with the control group. Although there was no difference between the PLGA-PEG-PLGA thermogel and CHS gel, the efficiency of the PLGA-PEG-PLGA thermogel was shown to be slightly improved compared with the CHS gel.

CONCLUSIONS

The biocompatibility of the PLGA-PEG-PLGA thermogel was proven well. The application of this thermogel effectively reduced epidural scarring and prevented the subsequent adhesion to the dura mater. No side effects were noted in the rats.

Modified PLGA–PEG–PLGA thermosensitive hydrogels with suitable thermosensitivity and properties for use in a drug delivery system

PLGA–PEG–PLGA (PPP) triblock copolymer is the most widely studied thermosensitive hydrogel owing to its non-toxic, biocompatible, biodegradable, and thermosensitive properties.

An in situ poly(carboxybetaine) hydrogel for tissue engineering applications

Hydrogels provide three-dimensional (3D) frames with tissue-like elasticity and high water content for tissue scaffolds.

Cellularizing hydrogel-based scaffolds to repair bone tissue: How to create a physiologically relevant micro-environment?

Tissue engineering is a promising alternative to autografts or allografts for the regeneration of large bone defects. Cell-free biomaterials with different degrees of sophistication can be used for several therapeutic indications, to stimulate bone repair by the host tissue. However, when osteoprogenitors are not available in the damaged tissue, exogenous cells with an osteoblast differentiation potential must be provided. These cells should have the capacity to colonize the defect and to participate in the building of new bone tissue. To achieve this goal, cells must survive, remain in the defect site, eventually proliferate, and differentiate into mature osteoblasts. A critical issue for these engrafted cells is to be fed by oxygen and nutrients: the transient absence of a vascular network upon implantation is a major challenge for cells to survive in the site of implantation, and different strategies can be followed to promote cell survival under poor oxygen and nutrient supply and to promote rapid vascularization of the defect area. These strategies involve the use of scaffolds designed to create the appropriate micro-environment for cells to survive, proliferate, and differentiate in vitro and in vivo. Hydrogels are an eclectic class of materials that can be easily cellularized and provide effective, minimally invasive approaches to fill bone defects and favor bone tissue regeneration. Furthermore, by playing on their composition and processing, it is possible to obtain biocompatible systems with adequate chemical, biological, and mechanical properties. However, only a good combination of scaffold and cells, possibly with the aid of incorporated growth factors, can lead to successful results in bone regeneration. This review presents the strategies used to design cellularized hydrogel-based systems for bone regeneration, identifying the key parameters of the many different micro-environments created within hydrogels.

Hydrogels That Allow and Facilitate Bone Repair, Remodeling, and Regeneration

Bone defects can originate from a variety of causes, including trauma, cancer, congenital deformity, and surgical reconstruction. Success of the current "gold standard" treatment (i.e., autologous bone grafts) is greatly influenced by insufficient or inappropriate bone stock. There is thus a critical need for the development of new, engineered materials for bone repair. This review describes the use of natural and synthetic hydrogels as scaffolds for bone tissue engineering. We discuss many of the advantages that hydrogels offer as bone repair materials, including their potential for osteoconductivity, biodegradability, controlled growth factor release, and cell encapsulation. We also discuss the use of hydrogels in composite devices with metals, ceramics, or polymers. These composites are useful because of the low mechanical moduli of hydrogels. Finally, the potential for thermosetting and photo-cross-linked hydrogels as three-dimensionally (3D) printed, patient-specific devices is highlighted. Three-dimensional printing enables controlled spatial distribution of scaffold materials, cells, and growth factors. Hydrogels, especially natural hydrogels present in bone matrix, have great potential to augment existing bone tissue engineering devices for the treatment of critical size bone defects.

Biodegradable PEG-Based Amphiphilic Block Copolymers for Tissue Engineering Applications

Biodegradable tissue engineering scaffolds have great potential for delivering cells/therapeutics and supporting tissue formation. Polyesters, the most extensively investigated biodegradable synthetic polymers, are not ideally suited for diverse tissue engineering applications due to limitations associated with their hydrophobicity. This review discusses the design and applications of amphiphilic block copolymer scaffolds integrating hydrophilic poly(ethylene glycol) (PEG) blocks with hydrophobic polyesters. Specifically, we highlight how the addition of PEG results in striking changes to the physical properties (swelling, degradation, mechanical, handling) and biological performance (protein & cell adhesion) of the degradable synthetic scaffolds in vitro. We then perform a critical review of how these in vitro characteristics translate to the performance of biodegradable amphiphilic block copolymer-based scaffolds in the repair of a variety of tissues in vivo including bone, cartilage, skin, and spinal cord/nerve. We conclude the review with recommendations for future optimizations in amphiphilic block copolymer design and the need for better-controlled in vivo studies to reveal the true benefits of the amphiphilic synthetic tissue scaffolds.

In Vivo Osteogenic Differentiation of Human Embryoid Bodies in an Injectable in Situ-Forming Hydrogel

In this study, we examined the in vivo osteogenic differentiation of human embryoid bodies (hEBs) by using an injectable in situ-forming hydrogel. A solution containing MPEG-b-(polycaprolactone-ran-polylactide) (MCL) and hEBs was easily prepared at room temperature. The MCL solution with hEBs and osteogenic factors was injected into nude mice and developed into in situ-forming hydrogels at the injection sites; these hydrogels maintained their shape even after 12 weeks in vivo, thereby indicating that the in situ-forming MCL hydrogel was a suitable scaffold for hEBs. The in vivo osteogenic differentiation was observed only in the in situ gel-forming MCL hydrogel in the presence of hEBs and osteogenic factors. In conclusion, this preliminary study suggests that hEBs and osteogenic factors embedded in an in situ-forming MCL hydrogel may provide numerous benefits as a noninvasive alternative for allogeneic tissue engineering applications.

Thermoresponsive hydrogels for cellular delivery

The delivery of living cells into a host body has emerged as a promising approach to treating a variety of different diseases and for tissue repair. However, one of the major obstacles for clinical success is to deliver the cells to the target tissue without losing control of cell fate and function after transplantation. Temperature-responsive biomaterials represent a promising vehicle to deliver cells noninvasively by injection of a liquid precursor, which undergoes a reversible phase transition at body temperature, thus, forming temperature-induced hydrogels in situ. The final material provides transplanted cells with a synthetic extracellular matrix, which retains the cells at the injection site, supports cell growth and mitigates migration. This mini review is intended to cover the fundamental physicochemical characteristics of these thermoresponsive biomaterials, and to examine the applications, with a focus on the recently developed cell-delivery systems for tissue engineering and cell therapy, including advantages, limitations and future challenges.

Adult multipotent stromal cell technology for bone regeneration: a review

Since the discovery of bone marrow derived stromal cell osteogenesis in the 1960s, tissue engineering with adult multipotent stromal cells (MSCs) has evolved as a promising approach to restore structure and function of bone compromised by injury or disease. To date, accelerated bone formation with MSCs has been demonstrated with a variety of tissue engineering strategies. Though MSC bone tissue engineering has advanced over the last few decades, limitations to clinical translation remain. A current review of this promising field is presented with a specific focus on equine investigations.

Controlled release of dexamethasone from peptide nanofiber gels to modulate inflammatory response

New biomaterials that have the ability to locally suppress an immune response could have broad therapeutic use in the treatment of diseases characterized by acute or chronic inflammation or as a strategy to facilitate improved efficacy in cell or tissue transplantation. We report here on the preparation of a modular peptide amphiphile (PA) capable of releasing an anti-inflammatory drug, dexamethasone (Dex), by conjugation via a labile hydrazone linkage. This molecule self-assembled in water into long supramolecular nanofibers when mixed with a similar PA lacking the drug conjugate, and the addition of calcium salt to screen electrostatic repulsion between nanofibers promoted gel formation. These nanofiber gels demonstrated sustained release of soluble Dex for over one month in physiologic media. The Dex released from these gels maintained its anti-inflammatory activity when evaluated in vitro using a human inflammatory reporter cell line and furthermore preserved cardiomyocyte viability upon induced oxidative stress. The ability of this gel to mitigate the inflammatory response in cell transplantation strategies was evaluated using cell-surrogate polystyrene microparticles suspended in the nanofiber gel that were then subcutaneously injected into mice. Live animal luminescence imaging using the chemiluminescent reporter molecule luminol showed a significant reduction in inflammation at the site where particles were injected with Dex-PA compared to the site of injection for particles within a control PA in the same animal. Histological evidence suggested a marked reduction in the number of infiltrating inflammatory cells when particles were delivered within Dex-PA nanofiber gels, and very little inflammation was observed at either 3 days or 21 days post-implantation. The use of Dex-PA could facilitate localized anti-inflammatory activity as a component of biomaterials designed for various applications in regenerative medicine and could specifically be a useful module for PA-based therapies. More broadly, these studies define a versatile strategy for facile synthesis of self-assembling peptide-based materials with the ability to control drug release.

Strategies for controlled delivery of growth factors and cells for bone regeneration

The controlled delivery of growth factors and cells within biomaterial carriers can enhance and accelerate functional bone formation. The carrier system can be designed with pre-programmed release kinetics to deliver bioactive molecules in a localized, spatiotemporal manner most similar to the natural wound healing process. The carrier can also act as an extracellular matrix-mimicking substrate for promoting osteoprogenitor cellular infiltration and proliferation for integrative tissue repair. This review discusses the role of various regenerative factors involved in bone healing and their appropriate combinations with different delivery systems for augmenting bone regeneration. The general requirements of protein, cell and gene therapy are described, with elaboration on how the selection of materials, configurations and processing affects growth factor and cell delivery and regenerative efficacy in both in vitro and in vivo applications for bone tissue engineering.

Injectable and biodegradable hydrogels: gelation, biodegradation and biomedical applications

Injectable hydrogels with biodegradability have in situ formability which in vitro/in vivo allows an effective and homogeneous encapsulation of drugs/cells, and convenient in vivo surgical operation in a minimally invasive way, causing smaller scar size and less pain for patients. Therefore, they have found a variety of biomedical applications, such as drug delivery, cell encapsulation, and tissue engineering. This critical review systematically summarizes the recent progresses on biodegradable and injectable hydrogels fabricated from natural polymers (chitosan, hyaluronic acid, alginates, gelatin, heparin, chondroitin sulfate, etc.) and biodegradable synthetic polymers (polypeptides, polyesters, polyphosphazenes, etc.). The review includes the novel naturally based hydrogels with high potential for biomedical applications developed in the past five years which integrate the excellent biocompatibility of natural polymers/synthetic polypeptides with structural controllability via chemical modification. The gelation and biodegradation which are two key factors to affect the cell fate or drug delivery are highlighted. A brief outlook on the future of injectable and biodegradable hydrogels is also presented (326 references).

Biodegradability and biocompatibility of thermoreversible hydrogels formed from mixing a sol and a precipitate of block copolymers in water

This study examines in vitro and in vivo biodegradation and biocompatibility of a thermogelling polymeric material, which we call a mixture hydrogel. The mixture contains two ABA-type triblock copolymers poly(d,l-lactic acid-co-glycolic acid)-b-poly(ethylene glycol)-b-poly(d,l-lactic acid-co-glycolic acid) (PLGA-PEG-PLGA) with different block ratios, and one polymer is soluble in water, but the other is not. The aqueous solutions of some mixtures with appropriate mix ratios form hydrogels at the body temperature. The degradation of mixture hydrogels proceeded by hydrolysis of ester bonds followed by the erosion of gel in phosphate saline buffer solution at 37 degrees C for nearly one month. The mass loss and reduction of molecular weight were detected. The mix ratio was found to significantly influence the degradation profiles. The rapid in vivo gel formation was confirmed after subcutaneous injection of the thermogelling copolymer mixtures into Sprague-Dawley rats. The in vivo degradation was a bit accelerated than in vitro hydrolysis, and the persistence time of injected hydrogels in vivo was found to be tuned by mix ratio. MTT assay and histological observations were used to examine the copolymer mixtures. Both in vitro and in vivo results illustrate acceptable biocompatibility of our materials. As such, the thermosensitive hydrogel of copolymer mixture is confirmed to be a promising candidate of an injectable biomaterial for drug delivery and tissue engineering.

In vivo efficacy of paclitaxel-loaded injectable in situ-forming gel against subcutaneous tumor growth

Injectable in situ-forming gels have received considerable attention as localized drug delivery systems. Here, we examined a poly(ethylene glycol)-b-polycaprolactone (MPEG-PCL) diblock copolymer gel as an injectable drug depot for paclitaxel (Ptx). The copolymer solution remained liquid at room temperature and rapidly gelled in vivo at body temperature. In vitro experiments showed that Ptx was released from MPEG-PCL copolymer gels over the course of more than 14 days. Experiments employing intratumoral injection of saline (control), gel-only, Taxol, or Ptx-loaded gel into mice bearing B16F10 tumor xenografts showed that Ptx-loaded gel inhibited the growth of B16F10 tumors more effectively than did saline or gel alone. Further, intratumoral injection of Ptx-loaded gel was more efficacious in inhibiting the growth of B16F10 tumor over 10 days than was injection of Taxol. A histological analysis demonstrated an increase in necrotic tissue in tumors treated with Ptx-loaded gel. In conclusion, our data show that intratumoral injection of Ptx-loaded MPEG-PCL diblock copolymer yielded an in situ-forming gel that exhibited controlled Ptx release profile, and that was effective in treating localized solid tumors.

Biocompatibility and mesenchymal stem cell response to poly(epsilon-caprolactone) nanowire surfaces for orthopedic tissue engineering

Concerns over utilizing autogenous cancellous bone grafts (such as donor-site morbidity, increased surgical time/complication rate, and restricted availability) as the gold-standard treatment for critical-sized defects in bone have motivated the development of a wide variety of sophisticated synthetic bone scaffolds in recent years. In this work, a novel solvent-free template synthesis technique was utilized to fabricate poly(epsilon-caprolactone) (PCL) nanowire surfaces as a building block for the development of three-dimensional bone scaffolds. Bone marrow-derived mesenchymal stem cells (MSCs) were used to characterize the short- and long-term in vitro biocompatibility and cellular response to these surfaces. A 4-week study in rats was conducted to assess in vivo biocompatibility as well. Short-term in vitro studies revealed that PCL nanowire surfaces enhanced MSC response in terms of survivability, viability, cytoskeleton changes, and morphology as compared with control surfaces (smooth PCL and polystyrene). In long-term in vitro studies, nanowire surfaces induced a rapid production of bone extracellular matrix by differentiated MSCs as indicated by accelerated calcium phosphate mineralization, and osteocalcin and osteopontin production. In vivo studies and histological analysis confirmed that nanowire surfaces are biocompatible. Preliminary biodegradation studies were conducted and indicated that rate of PCL biodegradation can, to some extent, be controlled through the inclusion of nanowires and ester-degrading enzymes. In addition to demonstrating enhanced short- and long-term MSC response to PCL nanowire surfaces, this work presents a simple technique for solvent-free fabrication and bioactive molecule encapsulation of biocompatible, biodegradable three-dimensional bone scaffold components and warrants further investigation.

Mixing a sol and a precipitate of block copolymers with different block ratios leads to an injectable hydrogel

A facile method to obtain a thermoreversible physical hydrogel was found by simply mixing an aqueous sol of a block copolymer with a precipitate of a similar copolymer but with a different block ratio. Two ABA-type triblock copolymers poly(D,L-lactic acid-co-glycolic acid)-B-poly(ethylene glycol)-B-poly(D,L-lactic acid-co-glycolic acid) (PLGA-PEG-PLGA) were synthesized. One sample in water was a sol in a broad temperature region, while the other in water was just a precipitate. The mixture of these two samples with a certain mix ratio underwent, however, a sol-to-gel-to-precipitate transition upon an increase of temperature. A dramatic tuning of the sol-gel transition temperature was conveniently achieved by merely varying mix ratio, even in the case of a similar molecular weight. Our study indicates that the balance of hydrophobicity and hydrophilicity within this sort of amphiphilic copolymers is critical to the inverse thermal gelation in water resulting from aggregation of micelles. The availability of encapsulation and sustained release of lysozyme, a model protein by the thermogelling systems was confirmed. This "mix" method provides a very convenient approach to design injectable thermogelling biomaterials with a broad adjustable window, and the novel copolymer mixture platform is potentially used in drug delivery and other biomedical applications.

In vivo osteogenic differentiation of human adipose-derived stem cells in an injectable in situ-forming gel scaffold

The sol-to-gel transition occurring at around body temperature makes the MPEG-PCL diblock copolymer an ideal candidate material for use as an injectable in situ-forming gel containing human adipose tissue-derived stem cells (hADSCs). The sol can be prepared at room temperature, and the gel forms at body temperature. Solutions of the copolymer containing hADSCs and osteogenic factors injected into rats formed gel scaffolds at the injection sites. The gels thus formed showed the interconnective pore structure required to support growth, proliferation, and differentiation of hADSCs. Bromodeoxyuridine-labeled hADSCs were confirmed to be present in gels formed in vivo. Bone formation was observed only in gel implants containing both hADSCs and osteogenic factors. Subcutaneous implantation of the in situ-forming gel scaffold demonstrated that hADSCs embedded in the gel stimulated much lower host tissue responses than did the gel alone, probably because of the unique immunomodulatory properties of hADSCs. In conclusion, our data on hADSCs embedded in an in situ gel scaffold suggest that this formulation may provide numerous benefits as a noninvasive alternative for tissue-engineered bone formation.

Quantitative screening of engineered implants in a long bone defect model in rabbits

We have standardized a long bone defect model in rabbits to quantitatively compare the bone healing performance of engineered biological implants and have tested the bone healing efficiency of porous cylindrical scaffolds (ø-h, 6-20 mm [diameter 6 mm, height 20 mm] porosity, 70%) that were produced from hydroxyapatite (HA), titanium (Ti), and a novel biodegradable polymer-bioceramic composite (PH70alphaTCP). Scaffolds were perfused with or without 20 x 10(6) rabbit periosteal cells (RPCs) in a bioreactor and implanted in a standardized 2 cm defect in rabbit tibiae. X-rays revealed that new bone had formed at 3 weeks after creation of the defects. At sacrifice after 10 weeks, bone corticalization was observed in the majority of animals. Although PH70alphaTCP scaffolds did not inhibit callus formation, histomorphometric analysis revealed that there was no bone within the biomaterial, in contrast to HA and Ti scaffolds (bone volume ranging from 10% to 25%). We found that Ti and HA scaffold had good osteoconductive properties, but only HA scaffolds seeded with RPCs contributed to long bone mechanical functionality, with the maximum energy and angle being 308% and 155% greater than in control defects without scaffold.

Chitosan gel as an in situ-forming scaffold for rat bone marrow mesenchymal stem cells in vivo

We herein formulated and characterized an in situ-forming chitosan gel consisting of chitosan and glycerol phosphate (GP) disodium salt, and examined its use as an in vivo scaffold for rat bone marrow mesenchymal stem cells (rBMSCs). First, the phase transition behaviors of chitosan solutions formulated with and without GP were characterized as a function of temperature. Chitosan solutions containing > 20 wt % GP became a gel at 37 degrees C and maintained this form for 28 days in vitro and in vivo. Next, we examined whether the chitosan gel could act as a suitable biocompatible substrate for the attachment and proliferation of rBMSCs. Immunohistochemistry clearly demonstrated that rBMSCs survived well on the scaffold created by in situ-forming chitosan gel in rats. Injection of chitosan gel alone induced macrophage accumulation in the host tissue and at the edge of the chitosan, whereas injection of chitosan gel containing rBMSCs was associated with decreased macrophage accumulation, indicating immunosuppression by the transplanted rBMSCs. Our results collectively show for the first time that chitosan gel could serve as an in situ-forming gel scaffold for entrapped rBMSCs in vivo.

The effect of self-assembling peptide nanofiber scaffolds on mouse embryonic fibroblast implantation and proliferation

Development of new materials for tissue engineering can be facilitated by the capacity to efficiently monitor in vivo the survival, proliferation and differentiation behaviour of cells implanted in different target tissues. We present here the application of a previously developed platform that allows to monitor in real time the survival and proliferative behaviour of implanted cells in two anatomical sites: subcutaneous and intramuscular. Basically, the system is based on the use of a non-invasive bioluminescence imaging (BLI) technique to detect luciferase expressing C57BL/6 cells, mouse embryonic fibroblasts, seeded in two sets of scaffolds: 1, a RAD16-I self-assembling peptide nanofiber matrix and 2, a composite consisted of the same RAD16-I nanofibers contained into a microporous biorubber scaffold. Interestingly, our results indicated considerable differences in the behaviour of implanted cells in each scaffold type. We observed that the self-assembling peptide scaffold alone foster cell survival and promotes cell proliferation where the composite scaffold not. Since self-assembling peptide scaffolds presents value stiffness proximal to the implanted tissues it is suggestive to think that harder materials will provide a physical constriction for cells to proliferate as well as mechanical discontinuity. We therefore propose that it is important to close match the implantation environment with the cell/material constructs in order to obtain the best response of the cells, illustrating the convenience of this strategy for the development of new tissue engineering platforms.

Injectable hydrogels as unique biomedical materials

A concentrated fish soup could be gelled in the winter and re-solled upon heating. In contrast, some synthetic copolymers exhibit an inverse sol-gel transition with spontaneous physical gelation upon heating instead of cooling. If the transition in water takes place below the body temperature and the chemicals are biocompatible and biodegradable, such gelling behavior makes the associated physical gels injectable biomaterials with unique applications in drug delivery and tissue engineering etc. Various therapeutic agents or cells can be entrapped in situ and form a depot merely by a syringe injection of their aqueous solutions at target sites with minimal invasiveness and pain. This tutorial review summarizes and comments on this soft matter, especially thermogelling poly(ethylene glycol)-(biodegradable polyester) block copolymers. The main types of injectable hydrogels are also briefly introduced, including both physical gels and chemical gels.