Poly(lactic-co-glycolic acid) bone scaffolds with inverted colloidal crystal geometry

Biomedical polymer scaffolds mimicking bone marrow niches to advance in vitro expansion of hematopoietic stem cells

Hematopoietic stem cell (HSC) transplantation provides an effective platform for the treatment of hematological disorders. However, the donor shortage of HSCs and immune responses severely restrict the clinical applications of HSCs. Compared to allogeneic transplantation, autogenous transplantation poses less risk to the immune system, but the problem associated with insufficient HSCs remains a substantial challenge. A significant strategy for obtaining sufficient HSCs is to promote the expansion of HSCs. In vivo, a bone marrow microenvironment supports the survival and hematopoiesis of HSCs. Therefore, it is crucial to establish a platform that mimics the features of a bone marrow microenvironment for the in vitro expansion of HSCs. Three-dimensional (3D) scaffolds have emerged as the most powerful tools to mimic cellular microenvironments for the growth and proliferation of stem cells. Biomedical polymers have been widely utilized as cell scaffolds due to their advantageous features including favorable biocompatibility, biodegradability, as well as adjustable physical and chemical properties. This review focuses on recent advances in the study of biomedical polymer scaffolds that mimic bone marrow microenvironments for the in vitro expansion of HSCs. Bone marrow transplantation and microenvironments are first introduced. Then, biomedical polymer scaffolds for the expansion of HSCs and future prospects are summarized and discussed.

Colloidal systems toward 3D cell culture scaffolds

Three-dimensional porous scaffolds are essential for the development of tissue engineering and regeneration, as biomimetic supports to recreate the microenvironment present in natural tissues. To successfully achieve the growth and development of a specific kind of tissue, porous matrices should be able to influence cell behavior by promoting close cell-cell and cell-matrix interactions. To achieve this goal, the scaffold must fulfil a set of conditions, including ordered interconnected porosity to promote cell diffusion and vascularization, mechanical strength to support the tissue during continuous ingrowth, and biocompatibility to avoid toxicity. Among various building approaches to the construction of porous matrices, selected strategies afford hierarchical scaffolds with such defined properties. The control over porosity, microstructure or morphology, is crucial to the fabrication of high-end, reproducible scaffolds for the target application. In this review, we provide an insight into recent advances toward the colloidal fabrication of hierarchical scaffolds. After identifying the main requirements for scaffolds in biomedical applications, conceptual building processes are introduced. Examples of tissue regeneration applications are provided for different scaffold types, highlighting their versatility and biocompatibility. We finally provide a prospect about the current state of the art and limitations of porous scaffolds, along with challenges that are to be addressed, so these materials consolidate in the fields of tissue engineering and drug delivery.

Fabrication of Bioactive Inverted Colloidal Crystal Scaffolds Using Expanded Polystyrene Beads

Inverted colloidal crystal (ICC) hydrogel scaffolds have emerged as a new class of three-dimensional cell culture matrix that represents a unique opportunity to reproduce lymphoid tissue microenvironments. ICC geometry promotes the formation of stromal cell networks and their interaction with hematopoietic cells, a core cellular process in lymphoid tissues. When subdermally implanted, ICC hydrogel scaffolds direct unique foreign body responses to form a vascularized stromal tissue with prolonged attraction of hematopoietic cells, which together resemble lymphoid tissue microenvironments. While conceptually simple, fabrication of ICC hydrogel scaffold requires multiple steps and laborious handling of delicate materials. Here, we introduce a facile route for ICC hydrogel scaffold fabrication using expanded polystyrene (EPS) beads. EPS beads shrink and fuse in a tunable manner under pressurized thermal conditions, which serves as colloidal crystal templates for ICC scaffold fabrication. Inclusion of collagen in the precursor solution greatly simplified preparation of bioactive hydrogel scaffolds. The resultant EPS-templated bioactive ICC hydrogel scaffolds demonstrate characteristic features required for lymphoid tissue modeling in both in vitro and in vivo settings. We envision that the presented method will facilitate widespread implementation of ICC hydrogel scaffolds for lymphoid tissue engineering and other emerging applications. Impact statement Inverted colloidal crystal (ICC) hydrogel scaffolds have emerged as a new class of three-dimensional cell culture matrix that represents a unique opportunity for lymphoid tissue modeling and other emerging novel bioengineering applications. While conceptually simple, fabrication of the ICC hydrogel scaffold requires multiple steps and laborious handling of delicate materials with highly toxic chemicals. The presented method for ICC hydrogel scaffold fabrication using expanded polystyrene (EPS) beads is simple, cost-effective, and involves less toxic chemicals than conventional methods, while retaining comparable biological significance. We envision that EPS bead-based hydrogel scaffold fabrication will greatly facilitate the widespread implementation of ICC hydrogel scaffolds and their practical applications.

Chondrogenic phenotype in responses to poly(ɛ-caprolactone) scaffolds catalyzed by bioenzymes: effects of surface topography and chemistry

Biodegradable poly(ε-caprolactone) (PCL) has been increasingly investigated as a promising scaffolding material for articular cartilage tissue repair. However, its use can be limited due to its surface hydrophobicity and topography. In this study, 3D porous PCL scaffolds fabricated by a fused deposition modeling (FDM) machine were enzymatically hydrolyzed using two different biocatalysts, namely Novozyme®435 and Amano lipase PS, at varied treatment conditions in a pH 8.0 phosphate buffer solution. The improved surface topography and chemistry of the PCL scaffolds were anticipated to ultimately boost the growth of porcine articular chondrocytes and promote the chondrogenic phenotype during cell culture. Alterations in surface roughness, wettability, and chemistry of the PCL scaffolds after enzymatic treatment were thoroughly investigated using several techniques, e.g., SEM, AFM, contact angle and surface energy measurement, and XPS. With increasing enzyme content, incubation time, and incubation temperature, the surfaces of the PCL scaffolds became rougher and more hydrophilic. In addition, Novozyme®435 was found to have a higher enzyme activity than Amano lipase PS when both were used in the same enzymatic treatment condition. Interestingly, the enzymatic degradation process rarely induced the deterioration of compressive strength of the bulk porous PCL material and slightly reduced the molecular weight of the material at the filament surface. After 28 days of culture, both porous PCL scaffolds catalyzed by Novozyme®435 and Amano lipase PS could facilitate the chondrocytes to not only proliferate properly, but also function more effectively, compared with the non-modified porous PCL scaffold. Furthermore, the enzymatic treatments with 50 mg of Novozyme®435 at 25 °C from 10 min to 60 min were evidently proven to provide the optimally enhanced surface roughness and hydrophilicity most significantly favorable for induction of chondrogenic phenotype, indicated by the greatest expression level of cartilage-specific gene and the largest production of total glycosaminoglycans.

Inverse Opal Scaffolds and Their Biomedical Applications

Three-dimensional porous scaffolds play a pivotal role in tissue engineering and regenerative medicine by functioning as biomimetic substrates to manipulate cellular behaviors. While many techniques have been developed to fabricate porous scaffolds, most of them rely on stochastic processes that typically result in scaffolds with pores uncontrolled in terms of size, structure, and interconnectivity, greatly limiting their use in tissue regeneration. Inverse opal scaffolds, in contrast, possess uniform pores inheriting from the template comprised of a closely packed lattice of monodispersed microspheres. The key parameters of such scaffolds, including architecture, pore structure, porosity, and interconnectivity, can all be made uniform across the same sample and among different samples. In conjunction with a tight control over pore sizes, inverse opal scaffolds have found widespread use in biomedical applications. In this review, we provide a detailed discussion on this new class of advanced materials. After a brief introduction to their history and fabrication, we highlight the unique advantages of inverse opal scaffolds over their non-uniform counterparts. We then showcase their broad applications in tissue engineering and regenerative medicine, followed by a summary and perspective on future directions.

Diverse Applications of Nanomedicine

The design and use of materials in the nanoscale size range for addressing medical and health-related issues continues to receive increasing interest. Research in nanomedicine spans a multitude of areas, including drug delivery, vaccine development, antibacterial, diagnosis and imaging tools, wearable devices, implants, high-throughput screening platforms, etc. using biological, nonbiological, biomimetic, or hybrid materials. Many of these developments are starting to be translated into viable clinical products. Here, we provide an overview of recent developments in nanomedicine and highlight the current challenges and upcoming opportunities for the field and translation to the clinic.

Fabrication of Inverted Colloidal Crystal Poly(ethylene glycol) Scaffold: A Three-dimensional Cell Culture Platform for Liver Tissue Engineering

The ability to maintain hepatocyte function in vitro, for the purpose of testing xenobiotics' cytotoxicity, studying virus infection and developing drugs targeted at the liver, requires a platform in which cells receive proper biochemical and mechanical cues. Recent liver tissue engineering systems have employed three-dimensional (3D) scaffolds composed of synthetic or natural hydrogels, given their high water retention and their ability to provide the mechanical stimuli needed by the cells. There has been growing interest in the inverted colloidal crystal (ICC) scaffold, a recent development, which allows high spatial organization, homotypic and heterotypic cell interaction, as well as cell-extracellular matrix (ECM) interaction. Herein, we describe a protocol to fabricate the ICC scaffold using poly (ethylene glycol) diacrylate (PEGDA) and the particle leaching method. Briefly, a lattice is made from microsphere particles, after which a pre-polymer solution is added, properly polymerized, and the particles are then removed, or leached, using an organic solvent (e.g., tetrahydrofuran). The dissolution of the lattice results in a highly porous scaffold with controlled pore sizes and interconnectivities that allow media to reach cells more easily. This unique structure allows high surface area for the cells to adhere to as well as easy communication between pores, and the ability to coat the PEGDA ICC scaffold with proteins also shows a marked effect on cell performance. We analyze the morphology of the scaffold as well as the hepatocarcinoma cell (Huh-7.5) behavior in terms of viability and function to explore the effect of ICC structure and ECM coatings. Overall, this paper provides a detailed protocol of an emerging scaffold that has wide applications in tissue engineering, especially liver tissue engineering.

Silk fibroin scaffolds with inverse opal structure for bone tissue engineering

How scaffold porosity, pore diameter and geometry influence cellular behavior is-although heavily researched - merely understood, especially in 3D. This is mainly caused by a lack of suitable, reproducible scaffold fabrication methods, with processes such as gas foaming, lyophilization or particulate leaching still being the standard. Here we propose a method to generate highly porous silk fibroin scaffolds with monodisperse spherical pores, namely inverse opals, and study their effect on cell behavior. These silk fibroin inverse opal scaffolds were compared to salt-leached silk fibroin scaffolds in terms of human mesenchymal stem cell response upon osteogenic differentiation signals. While cell number remained similar on both scaffold types, extracellular matrix mineralization nearly doubled on the newly developed scaffolds, suggesting a positive effect on cell differentiation. By using the very same material with comparable average pore diameters, this increase in mineral content can be attributed to either the differences in pore diameter distribution or the pore geometry. Although the exact mechanisms leading to enhanced mineralization in inverse opals are not yet fully understood, our results indicate that control over pore geometry alone can have a major impact on the bioactivity of a scaffold toward stem cell differentiation into bone tissue. © 2016 The Authors Journal of Biomedical Materials Research Part B: Applied Biomaterials Published by Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 2074-2084, 2017.

Biofunctionalized Hydrogel Microscaffolds Promote 3D Hepatic Sheet Morphology

Development of artificial tissues providing the proper geometrical, mechanical, and environmental cues for cells is highly coveted in the field of tissue engineering. Recently, microfabrication strategies in combination with other chemistries have been utilized to capture the architectural complexity of intricate organs, such as the liver, in in vitro platforms. Here it is shown that a biofunctionalized poly (ethylene glycol) (PEG) hydrogel scaffold, fabricated using a sphere-template, facilitates hepatic sheet formation that follows the microscale patterns of the scaffold surface. The design takes advantage of the excellent diffusion properties of porous, uniform 3D hydrogel platforms, and the enhanced-cell-extracellular matrix interaction with the display of conjugated collagen type I, which in turn elicits favorable Huh-7.5 response. Collectively, the experimental findings and corresponding simulations demonstrate the importance of biofunctionalized porous scaffolds and indicate that the microscaffold shows promise in liver tissue engineering applications and provides distinct advantages over current cell sheet and hepatocyte spheroid technologies.

Scaling up self-assembly: bottom-up approaches to macroscopic particle organization

This review presents an overview of recent work in the field of non-Brownian particle self-assembly. Compared to nanoparticles that naturally self-assemble due to Brownian motion, larger, non-Brownian particles (d > 6 μm) are less prone to autonomously organize into crystalline arrays. The tendency for particle systems to experience immobilization and kinetic arrest grows with particle radius. In order to overcome this kinetic limitation, some type of external driver must be applied to act as an artificial "thermalizing force" upon non-Brownian particles, inducing particle motion and subsequent crystallization. Many groups have explored the use of various agitation methods to overcome the natural barriers preventing self-assembly to which non-Brownian particles are susceptible. The ability to create materials from a bottom-up approach with these characteristics would allow for precise control over their pore structure (size and distribution) and surface properties (topography, functionalization and area), resulting in improved regulation of key characteristics such as mechanical strength, diffusive properties, and possibly even photonic properties. This review will highlight these approaches, as well as discuss the potential impact of bottom-up macroscale particle assembly. The applications of such technology range from customizable and autonomously self-assembled niche microenvironments for drug delivery and tissue engineering to new acoustic dampening, battery, and filtration materials, among others. Additionally, crystals made from non-Brownian particles resemble naturally derived materials such as opals, zeolites, and biological tissue (i.e. bone, cartilage and lung), due to their high surface area, pore distribution, and tunable (multilevel) hierarchy.

Hybrid scaffolds based on PLGA and silk for bone tissue engineering

Porous silk scaffolds, which are considered to be natural polymers, cannot be used alone because they have a long degradation rate, which makes it difficult for them to be replaced by the surrounding tissue. Scaffolds composed of synthetic polymers, such as PLGA, have a short degradation rate, lack hydrophilicity and their release of toxic by-products makes them difficult to use. The present investigations aimed to study hybrid scaffolds fabricated from PLGA, silk and hydroxyapatite nanoparticles (Hap NPs) for optimized bone tissue engineering. The results from variable-pressure field emission scanning electron microscopy (VP-FE-SEM), equipped with EDS, confirmed that the fabricated scaffolds had a porous architecture, and the location of each component present in the scaffolds was examined. Contact angle measurements confirmed that the introduction of silk and HAp NPs helped to change the hydrophobic nature of PLGA to hydrophilic, which is the main constraint for PLGA used as a biomaterial. Thermo-gravimetric analysis (TGA) and FT-IR spectroscopy confirmed thermal decomposition and different vibrations caused in functional groups of compounds used to fabricate the scaffolds, which reflected improvement in their mechanical properties. After culturing osteoblasts for 1, 7 and 14 days in the presence of scaffolds, their viability was checked by MTT assay. The fluorescent microscopy results revealed that the introduction of silk and HAp NPs had a favourable impact on the infiltration of osteoblasts. In vivo experiments were conducted by implanting scaffolds in rat calvariae for 4 weeks. Histological examinations and micro-CT scans from these experiments revealed beneficial attributes offered by silk fibroin and HAp NPs to PLGA-based scaffolds for bone induction.

An overview of inverted colloidal crystal systems for tissue engineering

Scaffolding is at the heart of tissue engineering but the number of techniques available for turning biomaterials into scaffolds displaying the features required for a tissue engineering application is somewhat limited. Inverted colloidal crystals (ICCs) are inverse replicas of an ordered array of monodisperse colloidal particles, which organize themselves in packed long-range crystals. The literature on ICC systems has grown enormously in the past 20 years, driven by the need to find organized macroporous structures. Although replicating the structure of packed colloidal crystals (CCs) into solid structures has produced a wide range of advanced materials (e.g., photonic crystals, catalysts, and membranes) only in recent years have ICCs been evaluated as devices for medical/pharmaceutical and tissue engineering applications. The geometry, size, pore density, and interconnectivity are features of the scaffold that strongly affect the cell environment with consequences on cell adhesion, proliferation, and differentiation. ICC scaffolds are highly geometrically ordered structures with increased porosity and connectivity, which enhances oxygen and nutrient diffusion, providing optimum cellular development. In comparison to other types of scaffolds, ICCs have three major unique features: the isotropic three-dimensional environment, comprising highly uniform and size-controllable pores, and the presence of windows connecting adjacent pores. Thus far, this is the only technique that guarantees these features with a long-range order, between a few nanometers and thousands of micrometers. In this review, we present the current development status of ICC scaffolds for tissue engineering applications.

Fabrication of Cell Patches Using Biodegradable Scaffolds with a Hexagonal Array of Interconnected Pores (SHAIPs)

Cell patches are widely used for healing injuries on the surfaces or interfaces of tissues such as those of epidermis and myocardium. Here we report a novel type of porous scaffolds made of poly(D,L-lactic-co-glycolic acid) for fabricating cell patches. The scaffolds have a single layer of spherical pores arranged in a unique hexagonal pattern and are therefore referred to as "scaffolds with a hexagonal array of interconnected pores (SHAIPs)". SHAIPs contain both uniform pores and interconnecting windows that can facilitate the exchange of biomacromolecules, ensure homogeneous cell seeding, and promote cell migration. As a proof-of-concept demonstration, we have created skeletal muscle patches with a thickness of approximately 150 μm using SHAIPs. The myoblasts seeded in the scaffolds maintained high viability and were able to differentiate into multi-nucleated myotubes. Moreover, neovasculature could efficiently develop into the patches upon subcutaneous implantation in vivo.

Plug and play: combining materials and technologies to improve bone regenerative strategies

Despite recent advances in the development of biomaterials intended to replace natural bone grafts for the regeneration of large, clinically relevant defects, most synthetic solutions that are currently applied in the clinic are still inferior to natural bone grafts with regard to regenerative potential and are limited to non-weight-bearing applications. From a materials science perspective, we always face the conundrum of the preservation of bioactivity of calcium phosphate ceramics in spite of better mechanical and handling properties and processability of polymers. Composites have long been investigated as a method to marry these critical properties for the successful regeneration of bone and, indeed, have shown a significant improvement when used in combination with cells or growth factors. However, when looking at this approach from a clinical and regulatory perspective, the use of cells or biologicals prolongs the path of new treatments from the bench to the bedside. Applying 'smart' synthetic materials alone poses the fascinating challenge of instructing tissue regeneration in situ, thereby tremendously facilitating clinical translation. In the journey to make this possible, and with the aim of adding up the advantages of different biomaterials, combinations of fabrication technologies arise as a new strategy for generating instructive three-dimensional (3D) constructs for bone regeneration. Here we provide a review of recent technologies and approaches to create such constructs and give our perspective on how combinations of technologies and materials can help in obtaining more functional bone regeneration.

Replication of bone marrow differentiation niche: comparative evaluation of different three-dimensional matrices

The comparative evaluation of different 3D matrices-Matrigel, Puramatrix, and inverted colloidal crystal (ICC) scaffolds-provides a perspective for studying the pathology and potential cures for many blood and bone marrow diseases, and further proves the significance of 3D cultures with direct cell-cell contacts for in vitro mimicry of the human stem cell niche.

Enhancement of tibial regeneration in a rat model by adipose-derived stromal cells in a PLGA scaffold

INTRODUCTION

Autologous adipose-derived stromal cells (ASCs) are an obvious source of osteogenic cells and can be easily isolated from adipose tissue. We evaluated the potential of ASCs seeded onto a scaffold to heal tibial defects.

METHODS

Autologous ASCs were obtained from adipose tissue by collagenase digestion. The cells were seeded in three-dimensional poly(lactic)-glycolic acid (PLGA) scaffolds and cultured in osteogenic medium for four weeks. Evidence of osteogenesis was assessed by von Kossa staining in three-dimensional cultures following osteogenic induction. The critical size tibial defects (10mm) were created using a rat model. Defects were either left empty (sham group), treated with a PLGA scaffold alone (PLGA group), or a PLGA/ASC composite (PLGA/ASC group). Using radiologic and histologic analyses, we assessed total bone volume and vascular density. Total RNA was prepared from regenerated bone and analyzed for osteogenic marker gene expression.

RESULTS

In three-dimensional cultures, the PLGA/ASC composite showed multiple calcified extracellular matrix nodules on von Kossa staining after four weeks of differentiation. Near complete healing was observed between the PLGA/ASC engrafted tibial defects on plain radiographs and micro-CT findings. Total bone volume and mechanical strength were significantly higher in the PLGA/ASC group compared to the sham and PLGA groups. Histologic analysis revealed increased new bone formation along capillaries in the PLGA/ASC group. Real-time RT-PCR analysis revealed a significant increase in the expression of osteogenic genes in the PLGA/ASC group.

CONCLUSIONS

The results showed that the repair of tibial defects was accelerated by implantation of autologous ASCs seeded onto a PLGA scaffold. Therefore, PLGA/ASC is a promising new cell-based therapy for healing critical size tibial defects.

An examination of regenerative medicine-based strategies for the urinary bladder

Patients that are afflicted with dysfunctional urinary bladders due to developmental defect, trauma or malignant transformation have limited treatment options that would allow for complete recapitulation of the urinary bladder. Hence, novel tissue engineering techniques that are successful in regenerating functional urinary bladder tissue for replacement therapy would be invaluable. Current tissue engineering techniques are hampered by several problems including choice of appropriate cell type, inadequate development of new blood vessels to the regenerated tissue, tissue innervation and primitive bioscaffold design. This article describes the recent advances in stem cell biology and the material sciences to address these problems, and attempts to improve upon current tissue engineering techniques to make successful regeneration of urinary bladder tissue a reality.

Smart hybrid materials equipped by nanoreservoirs of therapeutics

Nanobiotechnology enables the emergence of entirely new classes of bioactive devices intended for targeted intracellular delivery for more efficacies and less toxicities. Among organic and inorganic approaches currently developed, controlled release from polymer matrices promises utmost clinical impact. Here, a unique nanotechnology strategy is used to entrap, protect, and stabilize therapeutic agents into polymer coatings acting as nanoreservoirs enrobing nanofibers of implantable membranes. Upon contact with cells, therapeutic agents become available through enzymatic degradation of the nanoreservoirs. As cells grow, divide, and infiltrate deeper into the porous membrane, they trigger slow and progressive release of therapeutic agents that, in turn, stimulate further cell proliferation. This constitutes the first instance of a smart living nanostructured hybrid membrane for regenerative medicine. The cell contact-dependent bioerodable nanoreservoirs described here will permit sustained release of drugs, genes, growth factors, etc., opening a general route to the design of sophisticated cell-therapy implants capable of robust and durable regeneration of a broad variety of tissues.

Traversing Material Scales: Macroscale LBL-Assembled Nanocomposites with Microscale Inverted Colloidal Crystal Architecture

The introduction of three-dimensional (3D) architecture to functional materials allows for the addition of unique characteristics such as special deformation patterns, negative Poison's ratio, negative thermal expansion, controlled biological interactions, and mass transport properties. It also aids in bridging the dimensional gap between layer-by-layer (LBL) assembled nanocomposites and macroscale applications while retaining the advantages of their nanoscale organization. Fabrication of 3D microscale features by traditional techniques are often restricted to a limited variety of materials and do not include hybrid organic-inorganic nanocomposites. This work describes a new method to synthesize macroscale materials with hierarchically controlled architecture by using LBL deposition in the voids of hexagonally packed arrays of uniform microspheres and can be potentially extended to a large variety of materials. Establishing systematic techniques to produce materials with hierarchical architecture involving nano-, micro-, and potentially millimeter scale features with fairly independent control at all levels, allows for the investigation of structural influences on material properties and for the development of new practical applications due to the unusual combinations of properties that can be achieved.

Isolation, culture, and osteogenic/chondrogenic differentiation of bone marrow-derived mesenchymal stem cells

Musculoskeletal disorders, as non-healing fractures and large bone defects, articular cartilage and subchondral bone injuries, often result in lifelong chronic pain and compromised quality of life. Although generally a natural process, failure of large bone defects to heal such as after complex fractures, resection of tumours, infections, or revisions of joint replacements remains a critical challenge that requires more appropriate solutions as those currently available. In addition, regeneration of chondral and osteochondral defects continues to be a challenge until to date. A profound understanding of the underlying mechanisms of endogenous regeneration is a prerequisite for successful bone and cartilage regeneration. Presently, one of the most promising therapeutic approaches is cell-based tissue engineering which provides a healthy population of cells to the injured site. Use of differentiated cells has severe limitations; an excellent alternative would be the application of adult marrow stromal cells/mesenchymal stem cells (MSC) which possess extensive proliferation potential and proven capability to differentiate along the osteochondral pathway. The process of osteo-/chondrogenesis can be mimicked in vitro by inducing osteo-chondroprogenitor stem cells to undergo osteogenesis and chondrogenesis through exposure of osteo-/chondrogenic favourable microenvironmental, mechanical, and nutritional conditions. This chapter provides comprehensive protocols for the isolation, expansion, and osteo-/chondrogenic differentiation of adult bone marrow-derived MSC.

Effects of VEGF loading on scaffold-confined vascularization

Adequate vascularization of tissue-engineered constructs remains a major challenge in bone grafting. In view of this, we loaded ß-tricalcium-phosphate (ß-TCP) and porous poly(L-lactide-co-glycolide) (PLGA) scaffolds via collagen coating with vascular endothelial growth factor (VEGF) and studied whether the VEGF loading improves scaffold angiogenesis and vascularization. Dorsal skinfold chambers were implanted into 48 balb/c mice, which were assigned to 6 groups (n = 8 each). Uncoated (controls), collagen-coated, and additionally VEGF-loaded PLGA and ß-TCP scaffolds were inserted into the chambers. Angiogenesis, neovascularization, and leukocyte-endothelial cell interaction were analyzed repeatedly during a 14-day observation period using intravital fluorescence microscopy. Furthermore, VEGF release from PLGA und ß-TCP scaffolds was studied by ELISA. Micromorphology was studied from histological specimens. Unloaded ß-TCP scaffolds showed an accelerated and increased angiogenic response when compared with unloaded PLGA scaffolds. In vitro, PLGA released significantly higher amounts of VEGF compared with ß-TCP at the first two days resulting in a rapid drop of the released amount at the following days up to day 7 where the VEGF release was negligible. Nonetheless, in vivo VEGF loading increased neovascularization, especially in ß-TCP scaffolds. This increased vascularization was associated with a temporary leukocytic response with pronounced leukocyte-endothelial cell interaction at days 3 and 6. Histology revealed adequate host tissue response and engraftment of both ß-TCP and PLGA scaffolds. Our study demonstrates that ß-TCP scaffolds offer more suitable conditions for vascularization than PLGA scaffolds, in particular if they are loaded with VEGF.

Orientation and self-assembly of cylindrical particles by anisotropic capillary interactions

In this research, we study cylindrical microparticles at fluid interfaces. Cylinders orient and assemble with high reliability to form end-to-end chains in dilute surfaces or dense rectangular lattices in crowded surfaces owing to capillary interactions. In isolation, a cylinder assumes one of two possible equilibrium states, the end-on state, in which the cylinder axis is perpendicular to the interface, or the side-on state, in which the cylinder axis is parallel to the interface. A phase diagram relating aspect ratio and contact angle is constructed to predict the preferred state and verified in experiment. Cylinders in the side-on state create distortions that result in capillary interactions. Overlapping deformations by neighboring particles drive oriented capillary assembly. Interferometry, electron microscopy, and numerical simulations are used to characterize the interface shape around isolated particles. Experiments and numerics show that "side-on" cylinders have concentrated excess area near the end faces, and that the interface distortion resembles an elliptical quadrupole a few radii away from the particle surface. To model the cylinder interactions for separations greater than a few radii, an anisotropic potential is derived based on elliptical quadrupoles. This potential predicts an attractive force and a torque, both of which depend strongly on aspect ratio, in keeping with experiment. Particle trajectories and angular orientations recorded by video microscopy agree with the predicted potential. In particular, the analysis predicts the rate of rotation, a feature lacking in prior analyses. To understand interactions near contact, the concentrated excess area near the cylinder ends is quantified and its role in creating stable end-to-end assemblies is discussed. When a pair of cylinders is near contact, these high excess area regions overlap to form a capillary bridge between the particles. This capillary bridge may stabilize the end-to-end chains. Finally, on densely packed surfaces, cylinder-covered colloidosomes form with particles arranged in regular, rectangular lattices in the interface; this densely packed structure differs significantly from assemblies reported for colloidosomes or particle-stabilized droplets in the literature.

Stretched inverse opal colloid crystal substrates-induced orientation of fibroblast

Recently, there has been increasing interest in studying the interaction between mammalian cells and nanometer-sized structures. However, the effect of nanostructures on cell behavior, such as cell morphology and alignment, is still largely unknown. Inverse opal colloid crystal substrates, which can be stretched to produce nano-scale pore structures of different degrees of orientation, serve as a convenient model system to study the effect of nanotopography on cell morphology and cell alignment. In this work, we fabricated inverse opal colloidal crystal films that were either unstretched or stretched to three, four or six times their original length, producing pore structures of increasing degree of orientation. Human dermal fibroblast-fetal (HDF-f) cells were seeded and cultured on these four types of substrates. The results from fluorescence microscopy and scanning electron microscopy indicated that cells showed the highest degree of alignment when cultured on inverse opal colloid crystal films that were stretched the most (six times original length). The results also demonstrated that the orientation of nanostructures could affect both the morphology and growth direction of fibroblasts. The ability to control the direction of cell growth through the engineering of nanostructures could have important applications in tissue engineering, especially for tissues with anisotropic structures, such as cardiac muscle, blood vessel, tendon and ligament.

Combined drug release from biodegradable bilayer coating for endovascular stents

In this work, the characterization of a biodegradable bilayer system, used as controlled and combined drug delivery platform, is reported. For this aim, a bilayer system, composed of poly(lactic-co-glycolic acid) and poly(3-hydroxybutyric-co-3-hydroxyvaleric acid), was investigated under physicochemical and functional aspects by evaluating polymer/polymer and polymer/stent material interactions, the kinetic of in vitro degradation, and drug release properties, comparing results with the monolayer reference systems. Obtained results showed that the bilayer system allowed increasing the total amount of eluted Tacrolimus and Paclitaxel drugs with respect to the monolayer systems in the considered testing period and conditions. This evidence was associated to a faster degradation of the tested copolymers in the bilayered configuration, excluding a synergic effect of two drugs on delivery performance. In addition, a macromolecular relaxation process was identified to govern the PLX release from poly(lactic-co-glycolic acid), whereas a pure Fickian diffusion occurred in the delivery of Tacrolimus from poly(3-hydroxybutyric-co-3-hydroxyvaleric acid).

Functionally graded beta-TCP/PCL nanocomposite scaffolds: in vitro evaluation with human fetal osteoblast cells for bone tissue engineering

The engineering of biomimetic tissue relies on the ability to develop biodegradable scaffolds with functionally graded physical and chemical properties. In this study, a twin-screw-extrusion/spiral winding (TSESW) process was developed to enable the radial grading of porous scaffolds (discrete and continuous gradations) that were composed of polycaprolactone (PCL), beta-tricalciumphosphate (beta-TCP) nanoparticles, and salt porogens. Scaffolds with interconnected porosity, exhibiting myriad radial porosity, pore-size distributions, and beta-TCP nanoparticle concentration could be obtained. The results of the characterization of their compressive properties and in vitro cell proliferation studies using human fetal osteoblast cells suggest the promising nature of such scaffolds. The significant degree of freedom offered by the TSESW process should be an additional enabler in the quest toward the mimicry of the complex elegance of the native tissues.

Multifunctional protein-encapsulated polycaprolactone scaffolds: fabrication and in vitro assessment for tissue engineering

Here we demonstrate the use of a twin screw extrusion/spiral winding (TSESW) process to generate protein-encapsulated tissue engineering scaffolds. Bovine serum albumin (BSA) was distributed into PCL matrix using both wet and hot melt extrusion methods. The encapsulation efficiency and the time-dependent release rate, as well as the tertiary structure of BSA (via circular dichroism), were investigated as a function of processing method and conditions. Within the relatively narrow processing window of this demonstration study it was determined that the wet extrusion method gave rise to greater stability of the BSA on the basis of circular dichroism data. The rate of proliferation of human fetal osteoblast (hFOB) cells and the rate of mineral deposition were found to be greater for wet extruded scaffolds, presumably due to the important differences in surface topographies (smoother scaffold surfaces upon wet extrusion). Overall, these findings suggest that the twin screw extrusion/spiral winding (TSESW) process offers significant advantages and flexibility in generating a wide variety of non-cytotoxic tissue engineering scaffolds with controllable distributions of porosity, physical and chemical properties and protein concentrations that can be tailored for the specific requirements of each tissue engineering application.

In vitro analog of human bone marrow from 3D scaffolds with biomimetic inverted colloidal crystal geometry

In vitro replicas of bone marrow can potentially provide a continuous source of blood cells for transplantation and serve as a laboratory model to examine human immune system dysfunctions and drug toxicology. Here we report the development of an in vitro artificial bone marrow based on a 3D scaffold with inverted colloidal crystal (ICC) geometry mimicking the structural topology of actual bone marrow matrix. To facilitate adhesion of cells, scaffolds were coated with a layer of transparent nanocomposite. After seeding with hematopoietic stem cells (HSCs), ICC scaffolds were capable of supporting expansion of CD34+ HSCs with B-lymphocyte differentiation. Three-dimensional organization was shown to be critical for production of B cells and antigen-specific antibodies. Functionality of bone marrow constructs was confirmed by implantation of matrices containing human CD34+ cells onto the backs of severe combined immunodeficiency (SCID) mice with subsequent generation of human immune cells.

Prolonged continuous in vitro human platelet production using three-dimensional scaffolds

OBJECTIVE

Methods producing human platelets using growth on plastic, on feeder layers, or in suspension have been described. We hypothesized that growth of hematopoietic progenitors in a three-dimensional (3D) scaffold would enhance platelet production sans feeder layer.

MATERIALS AND METHODS

We grew CD34 positively selected human cord blood cells in surgical-grade woven polyester fabric or purpose-built hydrogel scaffolds using a cocktail of cytokines.

RESULTS

We found production of functional platelets over 10 days with two-dimensional (2D), 24 days with 3D scaffolds in wells, and more than 32 days in a single-pass 3D perfusion bioreactor system. Platelet numbers produced daily were higher in 3D than 2D, and much higher in the 3D perfusion bioreactor system. Platelet output increased in hydrogel scaffolds coated with thrombopoietin and/or fibronectin, although this effect was largely obviated with markedly increased production caused by changes in added cytokines. In response to thrombin, the platelets produced aggregated and displayed increased surface CD62 and CD63.

CONCLUSION

Use of 3D scaffolds, especially in a bioreactor-maintained milieu, may allow construction of devices for clinical platelet production without cellular feeder layers.