Human embryonic stem cell-derived mesodermal progenitors display substantially increased tissue formation compared to human mesenchymal stem cells under dynamic culture conditions in a packed bed/column bioreactor

A Review of the Challenges Facing Global Commercialization of the Artificial Meat Industry

The sustained growth of global meat consumption incentivized the development of the meat substitute industry. However, long-term global commercialization of meat substitutes faces challenges that arise from technological innovation, limited consumer awareness, and an imperfect regulatory environment. Many important questions require urgent answers. This paper presents a review of issues affecting meat substitute manufacturing and marketing, and helps to bridge important gaps which appear in the literature. To date, global research on meat substitutes focuses mainly on technology enhancement, cost reduction, and commercialization with a few studies focused on a regulatory perspective. Furthermore, the studies on meat substitute effects on environmental pollution reduction, safety, and ethical risk perception are particularly important. A review of these trends leads to conclusions which anticipate the development of a much broader market for the meat substitute industry over the long term, the gradual discovery of solutions to technical obstacles, upgraded manufacturing, the persistent perception of ethical risk and its influence on consumer willingness to accept meat substitutes, and the urgent need for constructing an effective meat substitute regulatory system.

Pluripotent-derived Mesenchymal Stem/stromal Cells: an Overview of the Derivation Protocol Efficacies and the Differences Among the Derived Cells

Mesenchymal stem/stromal cells (MSCs) are remarkable tools for regenerative medicine. Therapeutic approaches using these cells can promote increased activity and viability in several cell types through diverse mechanisms such as paracrine and immunomodulatory activities, contributing substantially to tissue regeneration and functional recovery. However, biological samples of human MSCs, usually obtained from adult tissues, often exhibit variable behavior during in vitro culture, especially with respect to cell population heterogeneity, replicative senescence, and consequent loss of functionality. Accordingly, it is necessary to establish standard protocols to generate high-quality, stable cell cultures, for example, by using pluripotent stem cells (PSCs) in derivation protocols of MSC-like cells since PSCs maintain their characteristics consistently during culture. However, the available protocols seem to generate distinct populations of PSC-derivedMSCs (PSC-MSCs) with peculiar attributes, which do not always resemble bona fide primary MSCs. The present review addresses the developmental basis behind some of these derivation protocols, exposing the differences among them and discussing the functional properties of PSC-MSCs, shedding light on elements that may help determine standard characterizations and criteria to evaluate and define these cells.

Human Embryonic-Derived Mesenchymal Progenitor Cells (hES-MP Cells) are Fully Supported in Culture with Human Platelet Lysates

Human embryonic stem cell-derived mesenchymal progenitor (hES-MP) cells are mesenchymal-like cells, derived from human embryonic stem cells without the aid of feeder cells. They have been suggested as a potential alternative to mesenchymal stromal cells (MSCs) in regenerative medicine due to their mesenchymal-like proliferation and differentiation characteristics. Cells and cell products intended for regenerative medicine in humans should be derived, expanded and differentiated using conditions free of animal-derived products to minimize risk of animal-transmitted disease and immune reactions to foreign proteins. Human platelets are rich in growth factors needed for cell culture and have been used successfully as an animal serum replacement for MSC expansion and differentiation. In this study, we compared the proliferation of hES-MP cells and MSCs; the hES-MP cell growth was sustained for longer than that of MSCs. Growth factors, gene expression, and surface marker expression in hES-MP cells cultured with either human platelet lysate (hPL) or fetal bovine serum (FBS) supplementation were compared, along with differentiation to osteogenic and chondrogenic lineages. Despite some differences between hES-MP cells grown in hPL- and FBS-supplemented media, hPL was found to be a suitable replacement for FBS. In this paper, we demonstrate for the first time that hES-MP cells can be grown using platelet lysates from expired platelet concentrates (hPL).

Mesenchymal stem cell cultivation in electrospun scaffolds: mechanistic modeling for tissue engineering

Tissue engineering is a multidisciplinary field of research in which the cells, biomaterials, and processes can be optimized to develop a tissue substitute. Three-dimensional (3D) architectural features from electrospun scaffolds, such as porosity, tortuosity, fiber diameter, pore size, and interconnectivity have a great impact on cell behavior. Regarding tissue development in vitro, culture conditions such as pH, osmolality, temperature, nutrient, and metabolite concentrations dictate cell viability inside the constructs. The effect of different electrospun scaffold properties, bioreactor designs, mesenchymal stem cell culture parameters, and seeding techniques on cell behavior can be studied individually or combined with phenomenological modeling techniques. This work reviews the main culture and scaffold factors that affect tissue development in vitro regarding the culture of cells inside 3D matrices. The mathematical modeling of the relationship between these factors and cell behavior inside 3D constructs has also been critically reviewed, focusing on mesenchymal stem cell culture in electrospun scaffolds.

Engineering human bone grafts with new macroporous calcium phosphate cement scaffolds

Bone engineering opens the possibility to grow large amounts of tissue products by combining patient-specific cells with compliant biomaterials. Decellularized tissue matrices represent suitable biomaterials, but availability, long processing time, excessive cost, and concerns on pathogen transmission have led to the development of biomimetic synthetic alternatives. We recently fabricated calcium phosphate cement (CPC) scaffolds with variable macroporosity using a facile synthesis method with minimal manufacturing steps and demonstrated long-term biocompatibility in vitro. However, there is no knowledge on the potential use of these scaffolds for bone engineering and whether the porosity of the scaffolds affects osteogenic differentiation and tissue formation in vitro. In this study, we explored the bone engineering potential of CPC scaffolds with two different macroporosities using human mesenchymal progenitors derived from induced pluripotent stem cells (iPSC-MP) or isolated from bone marrow (BMSC). Biomimetic decellularized bone scaffolds were used as reference material in all experiments. The results demonstrate that, irrespective of their macroporosity, the CPC scaffolds tested in this study support attachment, viability, and growth of iPSC-MP and BMSC cells similarly to decellularized bone. Importantly, the tested materials sustained differentiation of the cells as evidenced by increased expression of osteogenic markers and formation of a mineralized tissue. In conclusion, the results of this study suggest that the CPC scaffolds fabricated using our method are suitable to engineer bone grafts from different cell sources and could lead to the development of safe and more affordable tissue grafts for reconstructive dentistry and orthopaedics and in vitro models for basic and applied research.

Visualizing molecular distributions for biomaterials applications with mass spectrometry imaging: a review

Mass spectrometry imaging (MSI) is a rapidly emerging field that is continually finding applications in new and exciting areas. The ability of MSI to measure the spatial distribution of molecules at or near the surface of complex substrates makes it an ideal candidate for many applications, including those in the sphere of materials chemistry. Continual development and optimization of both ionization sources and analyzer technologies have resulted in a wide array of MSI tools available, both commercially available and custom-built, with each configuration possessing inherent strengths and limitations. Despite the unique potential of MSI over other chemical imaging methods, their potential and application to (bio)materials science remains in our view a largely underexplored avenue. This review will discuss these techniques enabling high parallel molecular detection, focusing on those with reported uses in (bio)materials chemistry applications and highlighted with select applications. Different technologies are presented in three main sections; secondary ion mass spectrometry (SIMS) imaging, matrix-assisted laser desorption ionization (MALDI) MSI, and emerging MSI technologies with potential for biomaterial analysis. The first two sections (SIMS and MALDI) discuss well-established methods that are continually evolving both in technological advancements and in experimental versatility. In the third section, relatively new and versatile technologies capable of performing measurements under ambient conditions will be introduced, with reported applications in materials chemistry or potential applications discussed. The aim of this review is to provide a concise resource for those interested in utilizing MSI for applications such as biomimetic materials, biological/synthetic material interfaces, polymer formulation and bulk property characterization, as well as the spatial and chemical distributions of nanoparticles, or any other molecular imaging application requiring broad chemical speciation.

Short bursts of cyclic mechanical compression modulate tissue formation in a 3D hybrid scaffold

Among the cues affecting cells behaviour, mechanical stimuli are known to have a key role in tissue formation and mineralization of bone cells. While soft scaffolds are better at mimicking the extracellular environment, they cannot withstand the high loads required to be efficient substitutes for bone in vivo. We propose a 3D hybrid scaffold combining the load-bearing capabilities of polycaprolactone (PCL) and the ECM-like chemistry of collagen gel to support the dynamic mechanical differentiation of human embryonic mesodermal progenitor cells (hES-MPs). In this study, hES-MPs were cultured in vitro and a BOSE Bioreactor was employed to induce cells differentiation by mechanical stimulation. From day 6, samples were compressed by applying a 5% strain ramp followed by peak-to-peak 1% strain sinewaves at 1Hz for 15min. Three different conditions were tested: unloaded (U), loaded from day 6 to day 10 (L1) and loaded as L1 and from day 16 to day 20 (L2). Cell viability, DNA content and osteocalcin expression were tested. Samples were further stained with 1% osmium tetroxide in order to investigate tissue growth and mineral deposition by micro-computed tomography (µCT). Tissue growth involved volumes either inside or outside samples at day 21 for L1, suggesting cyclic stimulation is a trigger for delayed proliferative response of cells. Cyclic load also had a role in the mineralization process preventing mineral deposition when applied at the early stage of culture. Conversely, cyclic load during the late stage of culture on pre-compressed samples induced mineral formation. This study shows that short bursts of compression applied at different stages of culture have contrasting effects on the ability of hES-MPs to induce tissue formation and mineral deposition. The results pave the way for a new approach using mechanical stimulation in the development of engineered in vitro tissue as replacement for large bone fractures.

Development and fabrication of a two-layer tissue engineered osteochondral composite using hybrid hydrogel-cancellous bone scaffolds in a spinner flask

Biological treatment using engineered osteochondral composites has received growing attention for the repair of cartilage defects. Osteochondral composites combined with a dynamic culture provide great potential for improving the quality of constructs and cartilage regeneration as dynamic conditions mimic the in vivo condition where cells were constantly subjected to mechanical and chemical stimulation. In the present study, biophasic composites were produced in vitro consisting of cell-hydrogel (CH) and cell-cancellous bone (CB) constructs, followed by culturing in a dynamic system in a spinner flask. The aim of this study was to investigate cell behaviors (i.e. cell growth, differentiation, distribution and matrix deposition) cultured in different constructs under static and dynamic circumstances. As a result, we found that mechanical stimulation promoted osteogenic and chondrogenic differentiation of cells as indicated by the increased expression of ALP and glycosaminoglycan (GAG) in either bone or cartilage substitute materials. Dynamic culture yielded a preferable extracellular matrix production, particularly in hydrogel scaffolds. In addition, the enhanced mass transfer contributed to the interface formation, cells infiltration and distribution in the osteochondral composites. This study demonstrates that osteochondral composites incorporated with a dynamic culture improved the performance of the constructs, providing the basis for a promising tool and a better strategy for the rapid fabrication of osteochondral substitutes and regeneration of injured cartilage.

Secondary ion mass spectrometry and Raman spectroscopy for tissue engineering applications

Identifying the matrix properties that permit directing stem cell fate is crucial for expanding desired cell lineages ex vivo for disease treatment. Such efforts require knowledge of matrix surface chemistry and the cell responses they elicit. Recent progress in analyzing biomaterial composition and identifying cell phenotype with two label-free chemical imaging techniques, TOF-SIMS and Raman spectroscopy are presented. TOF-SIMS is becoming indispensable for the surface characterization of biomaterial scaffolds. Developments in TOF-SIMS data analysis enable correlating surface chemistry with biological response. Advances in the interpretation of Raman spectra permit identifying the fate decisions of individual, living cells with location specificity. Here we highlight this progress and discuss further improvements that would facilitate efforts to develop artificial scaffolds for tissue regeneration.

Modulating the biochemical and biophysical culture environment to enhance osteogenic differentiation and maturation of human pluripotent stem cell-derived mesenchymal progenitors

Advances in the fields of stem cell biology, biomaterials, and tissue engineering over the last decades have brought the possibility of constructing tissue substitutes with a broad range of applications in regenerative medicine, disease modeling, and drug discovery. Different types of human stem cells have been used, each presenting a unique set of advantages and limitations with regard to the desired research goals. Whereas adult stem cells are at the frontier of research for tissue and organ regeneration, pluripotent stem cells represent a more challenging cell source for clinical translation. However, with their unlimited growth and wide differentiation potential, pluripotent stem cells represent an unprecedented resource for the construction of advanced human tissue models for biological studies and drug discovery. At the heart of these applications lies the challenge to reproducibly expand, differentiate, and organize stem cells into mature, stable tissue structures. In this review, we focus on the derivation of mesenchymal tissue progenitors from human pluripotent stem cells and the control of their osteogenic differentiation and maturation by modulation of the biophysical culture environment. Similarly to enhancing bone development, the described principles can be applied to the construction of other mesenchymal tissues for basic and applicative studies.

Induced pluripotent stem cells for regenerative medicine

With the discovery of induced pluripotent stem (iPS) cells, it is now possible to convert differentiated somatic cells into multipotent stem cells that have the capacity to generate all cell types of adult tissues. Thus, there is a wide variety of applications for this technology, including regenerative medicine, in vitro disease modeling, and drug screening/discovery. Although biological and biochemical techniques have been well established for cell reprogramming, bioengineering technologies offer novel tools for the reprogramming, expansion, isolation, and differentiation of iPS cells. In this article, we review these bioengineering approaches for the derivation and manipulation of iPS cells and focus on their relevance to regenerative medicine.

Osteogenic response of human mesenchymal stem cells to well-defined nanoscale topography in vitro

BACKGROUND

Patterning medical devices at the nanoscale level enables the manipulation of cell behavior and tissue regeneration, with topographic features recognized as playing a significant role in the osseointegration of implantable devices.

METHODS

In this study, we assessed the ability of titanium-coated hemisphere-like topographic nanostructures of different sizes (approximately 50, 100, and 200 nm) to influence the morphology, proliferation, and osteogenic differentiation of human mesenchymal stem cells (hMSCs).

RESULTS

We found that the proliferation and osteogenic differentiation of hMSCs was influenced by the size of the underlying structures, suggesting that size variations in topographic features at the nanoscale level, independently of chemistry, can be exploited to control hMSC behavior in a size-dependent fashion.

CONCLUSION

Our studies demonstrate that colloidal lithography, in combination with coating technologies, can be exploited to investigate the cell response to well defined nanoscale topography and to develop next-generation surfaces that guide tissue regeneration and promote implant integration.

Make no bones about it: cells could soon be reprogrammed to grow replacement bones?

Recent developments in nuclear reprogramming allow the generation of patient-matched stem cells with broad potential for applications in cell therapies, disease modeling and drug discovery. An increasing body of work is reporting the derivation of lineage-specific progenitors from human-induced pluripotent stem cells (hiPSCs), which could in the near future be used to engineer personalized tissue substitutes, including those for reconstructive therapies of bone. Although the potential clinical impact of such technology is not arguable, significant challenges remain to be addressed before hiPSC-derived progenitors can be employed to engineer bone substitutes of clinical relevance. The most important challenge is indeed the construction of personalized multicellular bone substitutes for the treatment of complex skeletal defects that integrate fast, are immune tolerated and display biofunctionality and long-term safety. As recent studies suggest, the merging of iPSC technology with advanced biomaterials and bioreactor technologies offers a way to generate bone substitutes in a controllable, automated manner with potential to meet the needs for scale-up and requirements for translation into clinical practice. It is only via the use of state-of-the-art cell culture technologies, process automation under GMP-compliant conditions, application of appropriate engineering strategies and compliance with regulatory policies that personalized lab-made bone grafts can start being used to treat human patients.