Biomimetic engineering of nanofibrous gelatin scaffolds with noncollagenous proteins for enhanced bone regeneration

Supra-Alveolar Bone Regeneration: Progress, Challenges, and Future Perspectives

Periodontitis is a highly prevalent disease that damages the supporting tissues of a tooth, including the alveolar bone. Alveolar bone loss owing to periodontitis is broadly categorized as supra-alveolar and intra-alveolar bone loss. In intra-alveolar bone loss, the defect has an angular or oblique orientation to the long axis of the tooth in an apical direction. In contrast, the defect is perpendicular to the long axis of the tooth in supra-alveolar bone loss. Unlike intra-alveolar bone defects, supra-alveolar bone defects lack supporting adjacent space, which makes supra-alveolar bone regeneration more challenging. In addition, the limited availability of resources in terms of vascularity and underlying tissues is another obstacle to supra-alveolar bone regeneration. Currently, supra-alveolar bone loss is the least predictable periodontal defect type in regenerative periodontal therapy. In addition, supra-alveolar bone loss is much more common than other alveolar bone loss. Despite its prevalence, research on supra-alveolar bone regeneration remains sparse, indicating an unmet need for significant research efforts in this area. This review summarize recent advances, obstacles, and future directions in the field of supra-alveolar bone regeneration. We discuss the biomaterials, bioactive molecules, and cells that have been tested for supra-alveolar bone regeneration, followed by pre-clinical and clinical approaches employed in this field. Additionally, we highlight obstacles and present future directions that will propel supra-alveolar bone research forward.

Multifunctional Nanofibrous Hollow Microspheres for Enhanced Periodontal Bone Regeneration

Destructive periodontitis destroys alveolar bone and eventually leads to tooth loss. While guided bone regeneration, which is based on creating a physical barrier to hinder the infiltration of epithelial and connective tissues into defect sites, has been widely used for alveolar bone regeneration, its outcomes remain variable. In this work, a multifunctional nanofibrous hollow microsphere (NFHMS) is developed for enhanced alveolar bone regeneration. The NFHMS is first prepared via combining a double emulsification and a thermally induced phase separation process. Next, E7, a short peptide with high specific affinity to bone marrow-derived stem cells (BMSCs), is conjugated onto the surface of NFHMS. After that, bone forming peptide (BFP), a short peptide derived from bone morphology protein 7 is loaded in calcium phosphate (CaP) nanoparticles, which are further encapsulated in the hollow space of the NFHMS-E7 to form NFHMS-E7-CaP/BFP. The NFHMS-E7-CaP/BFP selectively promoted the adhesion of BMSCs and expelled the adhesion of fibroblasts and epithelial cells. In addition, the BFP is sustainedly released from the NFHMS-E7-CaP/BFP to enhance the osteogenesis of BMSCs. A rat challenging fenestration defect model showed that the NFHMS-E7-CaP/BFP significantly enhanced alveolar bone tissue regeneration. This work provides a novel bioengineering approach for guided bone regeneration.

Biomimetic Hydrogel Strategies for Cancer Therapy

Recent developments in biomimetic hydrogel research have expanded the scope of biomedical technologies that can be used to model, diagnose, and treat a wide range of medical conditions. Cancer presents one of the most intractable challenges in this arena due to the surreptitious mechanisms that it employs to evade detection and treatment. In order to address these challenges, biomimetic design principles can be adapted to beat cancer at its own game. Biomimetic design strategies are inspired by natural biological systems and offer promising opportunities for developing life-changing methods to model, detect, diagnose, treat, and cure various types of static and metastatic cancers. In particular, focusing on the cellular and subcellular phenomena that serve as fundamental drivers for the peculiar behavioral traits of cancer can provide rich insights into eradicating cancer in all of its manifestations. This review highlights promising developments in biomimetic nanocomposite hydrogels that contribute to cancer therapies via enhanced drug delivery strategies and modeling cancer mechanobiology phenomena in relation to metastasis and synergistic sensing systems. Creative efforts to amplify biomimetic design research to advance the development of more effective cancer therapies will be discussed in alignment with international collaborative goals to cure cancer.

Connexin 43 in the function and homeostasis of osteocytes: a narrative review

Background and Objective

Connexin 43 (Cx43) is the main gap junction (GJ) protein and hemichannel protein in bone tissue. It is involved in the formation of hemichannels and GJs and establishes channels that can communicate directly to exchange substances and signals, affecting the structure and function of osteocytes. CX43 is very important for the normal development of bone tissue and the establishment and balance of bone reconstruction. However, the molecular mechanisms by which CX43 regulates osteoblast function and homeostasis have been less well studied, and this article provides a review of research in this area.

Methods

We searched the PubMed, EMBASE, Cochrane Library, and Web of Science databases for studies published up to June 2023 using the keywords Connexin 43/Cx43 and Osteocytes. Screening of literatures according to inclusion and exclusion guidelines and summarized the results.

Key Content and Findings

Osteocytes, osteoblasts, and osteoclasts all express Cx43 and form an overall network through the interaction between GJs. Cx43 is not only involved in the mechanical response of bone tissue but also in the regulation of signal transduction, which could provide new molecular markers and novel targets for the treatment of certain bone diseases.

Conclusions

Cx43 is expressed in osteoblasts, osteoclasts, and osteoclasts and plays an important role in regulating the function, signal transduction, and mechanotransduction of osteocytes. This review offers a new contribution to the literature by summarizing the relationship between Cx43, a key protein of bone tissue, and osteoblasts.

Bioactive Materials for Bone Regeneration: Biomolecules and Delivery Systems

Novel tissue regeneration strategies are constantly being developed worldwide. Research on bone regeneration is noteworthy, as many promising new approaches have been documented with novel strategies currently under investigation. Innovative biomaterials that allow the coordinated and well-controlled repair of bone fractures and bone loss are being designed to reduce the need for autologous or allogeneic bone grafts eventually. The current engineering technologies permit the construction of synthetic, complex, biomimetic biomaterials with properties nearly as good as those of natural bone with good biocompatibility. To ensure that all these requirements meet, bioactive molecules are coupled to structural scaffolding constituents to form a final product with the desired physical, chemical, and biological properties. Bioactive molecules that have been used to promote bone regeneration include protein growth factors, peptides, amino acids, hormones, lipids, and flavonoids. Various strategies have been adapted to investigate the coupling of bioactive molecules with scaffolding materials to sustain activity and allow controlled release. The current manuscript is a thorough survey of the strategies that have been exploited for the delivery of biomolecules for bone regeneration purposes, from choosing the bioactive molecule to selecting the optimal strategy to synthesize the scaffold and assessing the advantages and disadvantages of various delivery strategies.

Combination of human platelet lysate and 3D gelatin scaffolds to enhance osteogenic differentiation of human amniotic fluid derived mesenchymal stem cells

Bone disorders are major health issues requiring specialized care; however, the traditional bone grafting method had several limitations. Thus, bone tissue engineering has become a potential alternative. In therapeutic treatments, using fetal bovine serum (FBS) as a culture supplement may result in the risk of contamination and host immunological response; therefore, human platelet lysate (hPL) has been considered a viable alternative source. This study attempted to compare the effectiveness and safety of different culture supplements, either FBS or hPL, on the osteoblastic differentiation potential of mesenchymal stem cells derived from human amniotic fluid (hAF-MSCs) under a three-dimensional gelatin scaffold. The results indicate that hAF-MSCs have the potential to be used in clinical applications as they meet the criteria for mesenchymal stem cells based on their morphology, the expression of a particular surface antigen, their proliferation ability, and their capacity for multipotent differentiation. After evaluation by MTT and Alamar blue proliferation assay, 10% of hPL was selected. The osteogenic differentiation of hAF-MSCs under three-dimensional gelatin scaffold using osteogenic-induced media supplemented with hPL was achievable and markedly stimulated osteoblast differentiation. Moreover, the expressions of osteoblastogenic related genes, including OCN, ALP, and COL1A1, exhibited the highest degree of expression under hPL-supplemented circumstances when compared with the control and the FBS-supplemented group. The induced cells under hPL-supplemented conditions also presented the highest ALP activity level and the greatest degree of calcium accumulation. These outcomes would indicate that hPL is a suitable substitute for animal derived serum. Importantly, osteogenic differentiation of human amniotic fluid derived mesenchymal stem cells using hPL-supplemented media and three-dimensional scaffolds may open the door to developing an alternative construct for repairing bone defects.

Combined Application of Dentin Noncollagenous Proteins and Odontogenic Biphasic Calcium Phosphate in Rabbit Maxillary Sinus Lifting

BACKGROUND

Teeth can be used as a raw material for preparing bone substitutes due to their similar chemical composition to bone. The objective of our study was to evaluate the effect of odontogenic biphasic calcium phosphate (BCP) incorporating dentin noncollagenous proteins (DNCPs) on osteogenesis and stability in maxillary sinus augmentation.

METHODS

The composition, structure and morphology of the odontogenic BCP were tested by X-ray powder diffraction (XRD), Brunauer-Emmett-Teller, and scanning electron microscopy methods. The biocompatibility and osteoinduction of DNCPs and materials were examined in vitro and their bone regeneration capacity was verified in vivo.

RESULTS

The results showed that the cells adhered and proliferated well on the DNCP-loaded BCP scaffold. The odontogenic BCP and DNCPs promoted osteogenic differentiation of cells, The new bone formation in the BCP groups and DNCP subgroups was significantly higher than the new bone formation in the control, and the new bone quality was better. The bone regeneration effect of odontogenic BCP was similar to the effect of deproteinized bovine bone mineral, but β-TCP did not maintain the height and volume of bone reconstruction.

CONCLUSION

In conclusion, the combined application of DNCPs and odontogenic BCP is an effective strategy for tissue engineering osteogenesis in the maxillary sinus region. The biomimetic strategy could provide a new approach for patients requiring maxillary sinus lifting.

Shape-Memory ECM-Mimicking Heparin-Modified Nanofibrous Gelatin Scaffold for Enhanced Bone Regeneration in Sinus Augmentation

Biomaterials with clinical maneuverability and predictable bone regeneration are needed in the field of maxillary sinus augmentation. Herein, gelatin was chemically modified with heparin that specifically interacted with and stabilized bone morphogenetic protein-2 (BMP-2). We then introduced thermally induced phase separation to form the injectable, shape-memory, highly porous scaffold for bone regeneration in sinus augmentation. The hydrated heparin-modified nanofibrous gelatin scaffolds (NH-GS) were demonstrated with high resilience and shape-memory property, both macroscopically and microscopically, making them injectable scaffolds and expected to be applied in sinus augmentation. This novel scaffold was verified to be biocompatible and an excellent matrix to support cell attachment, proliferation, and infiltration. Further, the growth factor-loaded NH-GS showed sustained release kinetics of BMP-2 through affinity-based scaffold-growth factor interaction, compared with BMP-2 loaded gelatin sponge (GS) and nanofibrous gelatin scaffold (NF). Both in vitro and in vivo experiments demonstrated that the BMP-2-loaded NH-GS exhibited the highest osteogenesis among the other groups. Taken together, this study introduces a new regenerative strategy in maxillary sinus augmentation, which is injectable with a predefined shape and structure and promotes bone regeneration through a more sustained BMP-2 release.

Phosphorylated PAMAM dendrimers: an analog of dentin non-collagenous proteins, enhancing the osteo/odontogenic differentiation of dental pulp stem cells

OBJECTIVES

Polyamidoamine (PAMAM) dendrimers have well-defined structures, with monodispersity and easily modified surface groups, and they have broad applications in biomedicine. In this study, phosphorylated PAMAM (P-PAMAM) dendrimers were synthesized based on the idea of mimicking the phosphorylated proteins of dentin non-collagenous proteins (DNCP). Then, proliferation and osteo/odontogenic differentiation effects of P-PAMAM on dental pulp stem cells (DPSCs) were investigated and were compared with DNCP.

MATERIALS AND METHODS

P-PAMAM was synthesized via the Mannich-type reaction. DNCP were extracted directly from human dentin with ethylenediaminetetraacetic acid (EDTA) solution. Then, the conditioned medium of P-PAMAM and DNCP were prepared respectively and applied to DPSCs. Proliferation of P-PAMAM was investigated with CCK-8, flow cytometry, and EdU test. Osteo/odontogenic differentiation of P-PAMAM was analyzed using alkaline phosphatase activity and staining, RT-PCR, western blot, alizarin red staining, and immunofluorescence staining.

RESULTS

Fourier transform infrared spectroscopy and ¹H nuclear magnetic resonance revealed that PAMAM were successfully phosphorylated. Western blot verified that the extracted DNCP contained dentin-related proteins DSPP, OPN, and BMP2. In cell proliferation, there was no apparent difference between P-PAMAM, DNCP, and Control groups (P > 0.05). P-PAMAM and DNCP upregulated related genes and proteins expression (DSPP/DSPP, COL-1/COL-1, ALP/ALP, RUNX2/RUNX2, OSX/OSX, OCN/OCN) and matrix mineralization. Still, the potential was lower than that of DNCP (P < 0.05).

CONCLUSIONS

P-PAMAM dendrimers, as a biomimetic analog of DNCP, promote osteo/odontogenic differentiation of DPSCs without influencing their proliferation at a low concentration.

CLINICAL RELEVANCE

This preliminary study about P-PAMAM dendrimers is expected to provide a more convenient bioactive macromolecular material for the regeneration of the pulp-dentin complex.

Genome-Wide Association Study on Reproduction-Related Body-Shape Traits of Chinese Holstein Cows

Reproduction is an important production activity for dairy cows, and their reproductive performance can directly affect the level of farmers' income. To better understand the genomic regions and biological pathways of reproduction-related traits of dairy cows, in the present study, three body shape traits-Loin Strength (LS), Rump Angle (RA), and Pin Width (PW)-were selected as indicators of the reproductive ability of cows, and we conducted genome-wide association analyses on them. The heritability of these three traits was medium, ranging from 0.20 to 0.38. A total of 11 significant single-nucleotide polymorphisms (SNPs) were detected associated with these three traits. Bioinformatics analysis was performed on genes close to the significant SNPs (within 200 Kb) of LS, RA, and PW, and we found that these genes were totally enriched in 20 gene ontology terms and six KEGG signaling pathways. Finally, the five genes CDH12, TARP, PCDH9, DTHD1, and ARAP2 were selected as candidate genes that might affect LS. The six genes LOC781835, FSTL4, ATG4C, SH3BP4, DMP1, and DSPP were selected as candidate genes that might affect RA. The five genes USP6NL, CNTN3, LOC101907665, UPF2, and ECHDC3 were selected as candidate genes that might affect the PW of Chinese Holstein cows. Our results could provide useful biological information for the improvement of body shape traits and contribute to the genomic selection of Chinese Holstein cows.

Recent Trends in the Development of Bone Regenerative Biomaterials

The goal of a biomaterial is to support the bone tissue regeneration process at the defect site and eventually degrade in situ and get replaced with the newly generated bone tissue. Biomaterials that enhance bone regeneration have a wealth of potential clinical applications from the treatment of non-union fractures to spinal fusion. The use of bone regenerative biomaterials from bioceramics and polymeric components to support bone cell and tissue growth is a longstanding area of interest. Recently, various forms of bone repair materials such as hydrogel, nanofiber scaffolds, and 3D printing composite scaffolds are emerging. Current challenges include the engineering of biomaterials that can match both the mechanical and biological context of bone tissue matrix and support the vascularization of large tissue constructs. Biomaterials with new levels of biofunctionality that attempt to recreate nanoscale topographical, biofactor, and gene delivery cues from the extracellular environment are emerging as interesting candidate bone regenerative biomaterials. This review has been sculptured around a case-by-case basis of current research that is being undertaken in the field of bone regeneration engineering. We will highlight the current progress in the development of physicochemical properties and applications of bone defect repair materials and their perspectives in bone regeneration.

Bone Matrix Non-Collagenous Proteins in Tissue Engineering: Creating New Bone by Mimicking the Extracellular Matrix

Engineering biomaterials that mimic the extracellular matrix (ECM) of bone is of significant importance since most of the outstanding properties of the bone are due to matrix constitution. Bone ECM is composed of a mineral part comprising hydroxyapatite and of an organic part of primarily collagen with the rest consisting on non-collagenous proteins. Collagen has already been described as critical for bone tissue regeneration; however, little is known about the potential effect of non-collagenous proteins on osteogenic differentiation, even though these proteins were identified some decades ago. Aiming to engineer new bone tissue, peptide-incorporated biomimetic materials have been developed, presenting improved biomaterial performance. These promising results led to ongoing research focused on incorporating non-collagenous proteins from bone matrix to enhance the properties of the scaffolds namely in what concerns cell migration, proliferation, and differentiation, with the ultimate goal of designing novel strategies that mimic the native bone ECM for bone tissue engineering applications. Overall, this review will provide an overview of the several non-collagenous proteins present in bone ECM, their functionality and their recent applications in the bone tissue (including dental) engineering field.

Decellularized bone extracellular matrix in skeletal tissue engineering

Bone possesses an intrinsic regenerative capacity, which can be compromised by aging, disease, trauma, and iatrogenesis (e.g. tumor resection, pharmacological). At present, autografts and allografts are the principal biological treatments available to replace large bone segments, but both entail several limitations that reduce wider use and consistent success. The use of decellularized extracellular matrices (ECM), often derived from xenogeneic sources, has been shown to favorably influence the immune response to injury and promote site-appropriate tissue regeneration. Decellularized bone ECM (dbECM), utilized in several forms - whole organ, particles, hydrogels - has shown promise in both in vitro and in vivo animal studies to promote osteogenic differentiation of stem/progenitor cells and enhance bone regeneration. However, dbECM has yet to be investigated in clinical studies, which are needed to determine the relative efficacy of this emerging biomaterial as compared with established treatments. This mini-review highlights the recent exploration of dbECM as a biomaterial for skeletal tissue engineering and considers modifications on its future use to more consistently promote bone regeneration.

Performance of two bone substitutes of novel cotton-like β-TCP/PDLGA and granular β-TCP on bone regeneration in the femoral bone defect of the Beagle dogs

This study aimed to clarify whether novel cotton-like composite made of β-tricalcium phosphate (β-TCP) and poly(Dl-lactide-co-glycolide) (PDLGA) has a different effect on in vivo bone regeneration after bone defect than that of granular β-TCP. Five male Beagle dogs served as subjects. Cortical and medullary bone defect as non-through holes were made at the diaphysis of the bilateral femurs. One side was implanted with β-TCP/PDLGA (β-TCP/PDLGA group) and the other side was implanted with granular β-TCP (β-TCP group). At 4 weeks after implantation, we found no significant differences in the percentages of newly formed bone area and fibrous tissue area in the bone defect between the two groups. The β-TCP/PDLGA group showed more uniform filling on the surface and earlier disappearance of the material in the medullary region, and there were fewer inflammatory cells and osteoclasts in the bone defect in the β-TCP/PDLGA group. In conclusion, β-TCP/PDLGA performs better at filling the bone defect uniformly and disappears earlier at the cortical and medullary regions while causing less inflammation and bone resorption. Although bone formation activity of the β-TCP/PDLGA group in the cortical region was lower, the newly formed bone volume in bone defect of the β-TCP/PDLGA group was equal to that of the β-TCP group.

•

Novel cotton-like composite made of β-TCP/PDLGA was compared with granular β-TCP.

•

Cotton-like β-TCP/PDLGA performed better at filling the bone defect uniformly.

•

Cotton-like β-TCP/PDLGA disappeared earlier at the implanted bone regions.

•

β-TCP/PDLGA caused less inflammation and bone resorption in the bone defect.

•

The newly formed bone volume in bone defect was equal between the two materials.

Advancing application of mesenchymal stem cell-based bone tissue regeneration

Reconstruction of bone defects, especially the critical-sized defects, with mechanical integrity to the skeleton is important for a patient's rehabilitation, however, it still remains challenge. Utilizing biomaterials of human origin bone tissue for therapeutic purposes has provided a facilitated approach that closely mimics the critical aspects of natural bone tissue with regard to its properties. However, not only efficacious and safe but also cost-effective and convenient are important for regenerative biomaterials to achieve clinical translation and commercial success. Advances in our understanding of regenerative biomaterials and their roles in new bone formation potentially opened a new frontier in the fast-growing field of regenerative medicine. Taking inspiration from the role and multicomponent construction of native extracellular matrix (ECM) for cell accommodation, the ECM-mimicking biomaterials and the naturally decellularized ECM scaffolds were used to create new tissues for bone restoration. On the other hand, with the going deep in understanding of mesenchymal stem cells (MSCs), they have shown great promise to jumpstart and facilitate bone healing even in diseased microenvironments with pharmacology-based endogenous MSCs rescue/mobilization, systemic/local infusion of MSCs for cytotherapy, biomaterials-based approaches, cell-sheets/-aggregates technology and usage of subcellular vesicles of MSCs to achieve scaffolds-free or cell-free delivery system, all of them have been shown can improve MSCs-mediated regeneration in preclinical studies and several clinical trials. Here, following an overview discussed autogenous/allogenic and ECM-based bone biomaterials for reconstructive surgery and applications of MSCs-mediated bone healing and tissue engineering to further offer principles and effective strategies to optimize MSCs-based bone regeneration.

•

Focusing on MSCs based bone regeneration.

•

Discussed cytotherapy, cell-free therapies and cell-aggregates technology in detail.

•

Stating the approaches of MSCs in diseased microenvironments.

[Application status of hypoxia mimetic agents in bone tissue engineering]

OBJECTIVE

To summarize the application status of hypoxia mimetic agents in bone tissue engineering.

METHODS

The related literature about the hypoxia mimetic agents in bone tissue engineering was reviewed and analyzed. And the application status and progress of hypoxia mimetic agents in bone tissue engineering were retrospectively analyzed.

RESULTS

Hypoxia mimetic agents have the same effect as hypoxia in up-regulating the level of hypoxia inducible factor 1α (HIF-1α). The combination of hypoxia mimetic agents and scaffolds can up-regulate the level of HIF-1α in bone tissue engineering, thus promoting early vascularization and bone regeneration of the bone defect area, which provides a new idea for using bone tissue engineering to repair bone defect. At present, the commonly used hypoxia mimetic agents include iron chelating agents, oxoglutarate competitive analogues, proline hydroxylase inhibitors, etc.

CONCLUSION

Hypoxia mimetic agents have a wide application prospect in bone tissue engineering, but they have been used in bone tissue engineering for a short time, more attention should be paid to their possible side effects. In the future research, the hypoxia mimetic agents should be developed in the direction of higher targeting specificity and safety, and the exact mechanism of hypoxia mimetic agents in promoting bone regeneration should be further explored.

Novel three-dimensional bioglass functionalized gelatin nanofibrous scaffolds for bone regeneration

The clinical use of FDA-approved bone morphogenetic proteins (BMPs) are impeded by high costs, super-high dosage requirement, short half-life, and other undesirable side effects. Therefore, designing a biomaterial that can promote new bone formation without using exogenous BMPs is highly desirable in clinical applications. In the present work, a new kind of nanofibrous scaffold composed of gelatin and 45S5 bioglass (GF/45S5 BG) was prepared through thermally induced phase separation method together with the particle leach technique (TIPS&P). In addition to the significantly higher mechanical strength, the composite scaffolds (GF/45S5 BG) significantly increased osteogenic differentiation of human mesenchymal stem cells (hMSCs) in vitro compared with the neat scaffold (GF) without adding other biological agents, for example, BMPs or hormones. Most importantly, our in vivo studies also indicated that GF/45S5 BG scaffolds could directly promote ectopic bone regeneration in SD rats without exogenous BMP2. In summary, both in vitro and in vivo results indicated that the novel 45S5 bioglass functionalized GF nanofibrous scaffold is a promising alternative for bone tissue engineering.

Promoting Osseointegration of Dental Implants in Dog Maxillary Sinus Floor Augmentation Using Dentin Matrix Protein 1-Transduced Bone Marrow Stem Cells

BACKGROUND

Beta-tricalcium phosphate (β-TCP) has been employed successfully as a synthetic graft material in maxillary sinus floor augmentation (MSFA) for placing dental implants. However, the lack of osteogenic and osteoinductive properties of this substitute invariably results in bone regeneration of low quality and quantity. The purpose of this study was to determine whether loading dentin matrix protein-1 (DMP1) gene-modified bone marrow mesenchymal stem cells (BMSCs) onto β-TCP promoted bone regeneration and osteointegration of dental implants in MSFA of dogs.

METHODS

BMSCs were transduced with a lentiviral vector overexpressing the DMP1 gene (Lenti-DMP1) and with a lentiviral vector overexpressing enhanced green fluorescent protein (Lenti-EGFP) in vitro and were loaded into β-TCP scaffolds for autologous sinus grafting. Beagles received bilateral MSFA with four biomaterials (① Lenti-DMP1-transduced BMSCs/β-TCP, ② Lenti-EGFP-transduced BMSCs/β-TCP, ③ BMSCs/β-TCP, ④ β-TCP) and simultaneous implant placement at each sinus. Twelve weeks post operation, the maxillae were explanted, and every sinus was evaluated by radiographic observation, micro-CT and histological analysis. The osteogenic outcomes of bone regeneration and osseointegration were compared between the four groups.

RESULTS

The sinuses grafted with Lenti-DMP1-transduced BMSCs/β-TCP constructs presented a significantly higher increase in compact radiopaque area, higher local bone mineral densities, greater bone-implant contact and greater bone density when compared to other three groups.

CONCLUSION

These results demonstrated that combinations of β-TCP and DMP1 gene-modified BMSCs could be used to construct tissue-engineered bone to enhance mineralization of the regenerated bone and osseointegration of dental implants in MSFA.

Nanocomposite Films of Chitosan-Grafted Carbon Nano-Onions for Biomedical Applications

The design of scaffolding from biocompatible and resistant materials such as carbon nanomaterials and biopolymers has become very important, given the high rate of injured patients. Graphene and carbon nanotubes, for example, have been used to improve the physical, mechanical, and biological properties of different materials and devices. In this work, we report the grafting of carbon nano-onions with chitosan (CS-g-CNO) through an amide-type bond. These compounds were blended with chitosan and polyvinyl alcohol composites to produce films for subdermal implantation in Wistar rats. Films with physical mixture between chitosan, polyvinyl alcohol, and carbon nano-onions were also prepared for comparison purposes. Film characterization was performed with Fourier Transformation Infrared Spectroscopy (FTIR), Thermogravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC), Tensile strength, X-ray Diffraction Spectroscopy (XRD), and Scanning Electron Microscopy (SEM). The degradation of films into simulated body fluid (SBF) showed losses between 14% and 16% of the initial weight after 25 days of treatment. Still, a faster degradation (weight loss and pH changes) was obtained with composites of CS-g-CNO due to a higher SBF interaction by hydrogen bonding. On the other hand, in vivo evaluation of nanocomposites during 30 days in Wistar rats, subdermal tissue demonstrated normal resorption of the materials with lower inflammation processes as compared with the physical blends of ox-CNO formulations. SBF hydrolytic results agreed with the in vivo degradation for all samples, demonstrating that with a higher ox-CNO content increased the stability of the material and decreased its degradation capacity; however, we observed greater reabsorption with the formulations including CS-g-CNO. With this research, we demonstrated the future impact of CS/PVA/CS-g-CNO nanocomposite films for biomedical applications.

ECM-mimicking nanofibrous matrix coaxes macrophages toward an anti-inflammatory phenotype: Cellular behaviors and transcriptome analysis

An in-depth understanding of biomaterial cues to selectively polarize macrophages is beneficial in the design of "immuno-informed" biomaterials that positively interact with the immune system to dictate a favorable macrophage response following implantation. Given the promising future of ECM-mimicking nanofibrous biomaterials in biomedical application, it is essential to elucidate how their intrinsic cues, especially the nanofibrous architecture, affect macrophages. In the present study, we evaluated how the nanofibrous architecture of a gelatin matrix modulated macrophage responses from the perspectives of cellular behaviors and a transcriptome analysis. In our results, the nanofibrous surface attenuated M1 polarization and down-regulated the inflammatory responses of macrophages compared with a smooth surface. Besides, the cell-material interaction was up-regulated and the adhered macrophages tended to maintain an original, non-polarized state on the nanofibrous matrix. Accordingly, whole transcriptome analysis revealed that nanofibrous architecture up-regulated the pathways related to ECM-receptor interaction and down-regulated pathways related to pro-inflammation. This study provides a panoramic view of the interaction between macrophages and nanofibers, and offers valuable information for the design of immunomodulatory ECM-mimicking biomaterials for tissue regeneration.

Recent advances in periodontal regeneration: A biomaterial perspective

Periodontal disease (PD) is one of the most common inflammatory oral diseases, affecting approximately 47% of adults aged 30 years or older in the United States. If not treated properly, PD leads to degradation of periodontal tissues, causing tooth movement, and eventually tooth loss. Conventional clinical therapy for PD aims at eliminating infectious sources, and reducing inflammation to arrest disease progression, which cannot achieve the regeneration of lost periodontal tissues. Over the past two decades, various regenerative periodontal therapies, such as guided tissue regeneration (GTR), enamel matrix derivative, bone grafts, growth factor delivery, and the combination of cells and growth factors with matrix-based scaffolds have been developed to target the restoration of lost tooth-supporting tissues, including periodontal ligament, alveolar bone, and cementum. This review discusses recent progresses of periodontal regeneration using tissue-engineering and regenerative medicine approaches. Specifically, we focus on the advances of biomaterials and controlled drug delivery for periodontal regeneration in recent years. Special attention is given to the development of advanced bio-inspired scaffolding biomaterials and temporospatial control of multi-drug delivery for the regeneration of cementum-periodontal ligament-alveolar bone complex. Challenges and future perspectives are presented to provide inspiration for the design and development of innovative biomaterials and delivery system for new regenerative periodontal therapy.

Preparation of Chitosan/Poly(Vinyl Alcohol) Nanocomposite Films Incorporated with Oxidized Carbon Nano-Onions (Multi-Layer Fullerenes) for Tissue-Engineering Applications

Recently, tissue engineering became a very important medical alternative in patients who need to regenerate damaged or lost tissues through the use of scaffolds that support cell adhesion and proliferation. Carbon nanomaterials (carbon nanotubes, fullerenes, multi-wall fullerenes, and graphene) became a very important alternative to reinforce the mechanical, thermal, and antimicrobial properties of several biopolymers. In this work, five different formulations of chitosan/poly(vinyl alcohol)/oxidized carbon nano-onions (CS/PVA/ox-CNO) were used to prepare biodegradable scaffolds with potential biomedical applications. Film characterization consisted of Fourier-transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), tension strength, Young's modulus, X-ray diffraction spectroscopy (XRD), scanning electron microscopy (SEM), and energy-dispersive spectroscopy (EDS). The degradation in a simulated body fluid (FBS) demonstrated that all the formulations lost between 75% and 80% of their weight after 15 days of treatment, but the degradation decreased with the ox-CNO content. In vivo tests after 90 days of subdermal implantation of the nanocomposite films in Wistar rats' tissue demonstrated good biocompatibility without allergenic reactions or pus formation. There was a good correlation between FBS hydrolytic degradation and degradation in vivo for all the samples, since the ox-CNO content increased the stability of the material. All these results indicate the potential of the CS/PVA/ox-CNO nanocomposite films in tissue engineering, especially for long-term applications.

Biomimetic open porous structured core-shell microtissue with enhanced mechanical properties for bottom-up bone tissue engineering

Background: Microtissues constructed with hydrogels promote cell expansion and specific differentiation by mimicking the microarchitecture of native tissues. However, the suboptimal mechanical property and osteogenic activity of microtissues fabricated by natural polymers need further improvement for bone reconstruction application. Core-shell designed structures are composed of an inner core part and an outer part shell, combining the characteristics of different materials, which improve the mechanical property of microtissues. Methods: A micro-stencil array chip was used to fabricate an open porous core-shell micro-scaffold consisting of gelatin as shell and demineralized bone matrix particles modified with bone morphogenetic protein-2 (BMP-2) as core. Single gelatin micro-scaffold was fabricated as a control. Rat bone marrow mesenchymal stem cells (BMSCs) were seeded on the micro-scaffolds, after which they were dynamic cultured and osteo-induced in mini-capsule bioreactors to fabricate microtissues. The physical characteristics, biocompatibility, osteo-inducing and controlled release ability of the core-shell microtissue were evaluated in vitro respectively. Then microtissues were tested in vivo via ectopic implantation and orthotopic bone implantation in rat model. Results: The Young's modulus of core-shell micro-scaffold was nearly triple that of gelatin micro-scaffold, which means the core-shell micro-scaffolds have better mechanical property. BMSCs rapidly proliferated and retained the highest viability on core-shell microtissues. The improved osteogenic potential of core-shell microtissues was evidenced by the increased calcification based on von kossa staining and osteo-relative gene expression. At 3months after transplantation, core-shell microtissue group formed the highest number of mineralized tissues in rat ectopic subcutaneous model, and displayed the largest amount of new bony tissue deposition in rat orthotopic cranial defect. Conclusion: The novel core-shell microtissue construction strategy developed may become a promising cell delivery platform for bone regeneration.

Bio-Inspired Micropatterned Platforms Recapitulate 3D Physiological Morphologies of Bone and Dentinal Cells

Cells exhibit distinct 3D morphologies in vivo, and recapitulation of physiological cell morphologies in vitro is pivotal not only to elucidate many fundamental biological questions, but also to develop new approaches for tissue regeneration and drug screening. However, conventional cell culture methods in either a 2D petri dish or a 3D scaffold often lead to the loss of the physiological morphologies for many cells, such as bone cells (osteocytes) and dentinal cells (odontoblasts). Herein, a unique approach in developing a 3D extracellular matrix (ECM)-like micropatterned synthetic matrix as a physiologically relevant 3D platform is reported to recapitulate the morphologies of osteocytes and odontoblasts in vitro. The bio-inspired micropatterned matrix precisely mimics the hierarchic 3D nanofibrous tubular/canaliculi architecture as well as the compositions of the ECM of mineralized tissues, and is capable of controlling one single cell in a microisland of the matrix. Using this bio-inspired 3D platform, individual bone and dental stem cells are successfully manipulated to recapitulate the physiological morphologies of osteocytes and odontoblasts in vitro, respectively. This work provides an excellent platform for an in-depth understanding of cell-matrix interactions in 3D environments, paving the way for designing next-generation biomaterials for tissue regeneration.

Biomimetic matrices for rapidly forming mineralized bone tissue based on stem cell-mediated osteogenesis

Bone regeneration, following fracture, relies on autologous and allogenic bone grafts. However, majority of fracture population consists of older individuals with poor quality bone associated with loss and/or modification of matrix proteins critical for bone formation and mineralization. Allografts suffer from same limitations and carry the risk of delayed healing, infection, immune rejection and eventual fracture. In this work, we apply a synergistic biomimetic strategy to develop matrices that rapidly form bone tissue - a critical aspect of fracture healing of weight bearing bones. Collagen matrices, enhanced with two selected key matrix proteins, osteocalcin (OC) and/or osteopontin (OPN), increased the rate and quantity of synthesized bone matrix by increasing mesenchymal stem/stromal cell (MSC) proliferation, accelerating osteogenic differentiation, enhancing angiogenesis and showing a sustained bone formation response from MSC obtained from a variety of human tissue sources (marrow, fat and umbilical cord). In vivo assessment of OC/OPN mineralized scaffolds in a critical sized-defect rabbit long-bone model did not reveal any foreign body reaction while bone tissue was being formed. We demonstrate a new biomimetic strategy to rapidly form mineralized bone tissue and secure a sustained bone formation response by MSC from multiple sources, thus facilitating faster patient recovery and treatment of non-union fractures in aging and diseased population. Acellular biomimetic matrices elicit bone regeneration response from MSC, obtained from multiple tissue sources, and can be used in variety of scaffolds and made widely available.

Mesoporous silicate nanoparticles/3D nanofibrous scaffold-mediated dual-drug delivery for bone tissue engineering

Controlled delivery systems play a critical role in the success of bone morphogenetic proteins (i.e., BMP2 and BMP7) for challenged bone repair. Instead of single-drug release that is currently and commonly prevalent, dual-drug delivery strategies are highly desired to achieve effective bone regeneration because natural bone repair process is driven by multiple factors. Particularly, angiogenesis is essential for osteogenesis and requires more than just one factor (e.g., Vascular Endothelial Growth Factor, VEGF). Therefore, we developed a novel mesoporous silicate nanoparticles (MSNs) incorporated-3D nanofibrous gelatin (GF) scaffold for dual-delivery of BMP2 and deferoxamine (DFO). DFO is a hypoxia-mimetic drug that can activate hypoxia-inducible factor-1 alpha (HIF-1α), and trigger subsequent angiogenesis. Sustained BMP2 release system was achieved through encapsulation into large-pored MSNs, while the relative short-term release of DFO was engineered through covalent conjugation with chitosan to reduce its cytotoxicity and elongate its half-life. Both MSNs and DFO were incorporated onto a porous 3D GF scaffold to serve as a biomimetic osteogenic microenvironment. Our data indicated that DFO and BMP2 were released from a scaffold at different release rates (10 vs 28 days) yet maintained their angiogenic and osteogenic ability, respectively. Importantly, our data indicated that the released DFO significantly improved BMP2-induced osteogenic differentiation where the dose/duration was important for its effects in both mouse and human stem cell models. Thus, we developed a novel and tunable MSNs/GF 3D scaffold-mediated dual-drug delivery system and studied the potential application of the both FDA-approved DFO and BMP2 for bone tissue engineering.

Tailored biomimetic hydrogel based on a photopolymerised DMP1/MCF/gelatin hybrid system for calvarial bone regeneration

Searching for effective osteoinduction factors with higher specificity and biosafety for the preparation of biomimetic materials, which mimic the natural bone extracellular matrix (ECM), seems to be an optimum strategy for achieving ideal bone regeneration.

Tissue-specific bioactivity of soluble tendon-derived and cartilage-derived extracellular matrices on adult mesenchymal stem cells

BACKGROUND

Biological scaffolds composed of tissue-derived extracellular matrix (ECM) can promote homologous (i.e., tissue-specific) cell differentiation through preservation of biophysical and biochemical motifs found in native tissues. Solubilized ECMs derived from decellularized tendon and cartilage have recently been promoted as tissue-specific biomaterials, but whether tissue-specific bioactivity is preserved following solubilization is unknown. This study explored the tissue-specific bioactivity of soluble decellularized tendon and cartilage ECMs on human bone marrow-derived mesenchymal stem cells (MSCs) presented across different culture microenvironments, including two-dimensional (2D) tissue culture plastic, aligned electrospun nanofibers, cell pellets, and cell-seeded photocrosslinkable hydrogels.

METHODS

Tendon and cartilage ECMs were decellularized using established methods and solubilized either via pepsin digestion or urea extraction. The effect of soluble ECMs on cell proliferation and differentiation was initially explored by supplementing basal medium of human MSCs cultured on 2D tissue culture plastic. In subsequent experiments, MSCs were cultured on aligned electrospun nanofibers, ascell pellets, or encapsulated within photocrosslinkable methacrylated gelatin (GelMA) hydrogels. Urea-extracted tendon and cartilage ECMs were added as supplements.

RESULTS

Pepsin-digested ECMs did not promote homologous differentiation in human MSCs, whether provided as a medium supplement or three-dimensional (3D) hydrogels. In contrast, urea-extracted ECMs tended to promote tissue-specific differentiation of MSCs cultured in 2D and 3D microenvironments. The application of the small molecule TGF-β signaling inhibitor SB-431542 largely negated the tissue-specific gene expression patterns mediated by tendon and cartilage ECMs. This suggests that the action of endogenous TGF-β was required, but was not sufficient, to impart tissue-specific bioactivity of urea-extracted ECMs. When urea-extracted cartilage ECM was incorporated within a photocurable GelMA hydrogel it independently enhanced chondrogenesis in encapsulated MSCs, and showed additive prochondrogenesis upon TGF-β supplementation in the medium.

CONCLUSIONS

Urea-extracted ECM fractions of decellularized tendon and cartilage are soluble supplements capable of enhancing tissue-specific differentiation of adult stem cells.

BBP-Functionalized Biomimetic Nanofibrous Scaffold Can Capture BMP2 and Promote Osteogenic Differentiation

Bone morphogenetic proteins (BMPs, e.g., BMP2 and 7) are potent mediators for bone repair, however, their clinical use has been limited by their safety and cost-effectiveness. Therefore, innovative strategies that can improve the efficacy of BMPs, and thereby, use a lower dose of exogenous BMPs are highly desired. Inspired by the natural interaction between extracellular matrix (ECM) and growth factors, we hypothesize that bone matrix-mimicking nanofibrous scaffold functionalized with BMP binding moieties can selectively capture and stabilize BMPs, and thereby, promote BMP-induced osteogenic differentiation. To test our hypothesis, a gelatin nanofibrous scaffold was fabricated using thermally induced phase separation together with a porogen leaching technique (TIPS&P) and functionalized by a BMP-binding peptide (BBP) through cross-linking. Our data indicated that BBP decoration largely improved the BMP2 binding and retention capacity of the nanofibrous scaffolds without compromising their macro/microstructure and mechanical properties. Importantly, the BBP-functionalized gelatin scaffolds were able to significantly promote BMP2-induced osteogenic differentiation. Moreover, BBP alone was able to significantly stimulate endogenous BMP2 expression and improve osteogenic differentiation. Compared to other affinity-based drug delivery strategies, e.g., heparin and antibody-mediated growth factor delivering techniques, we expect BBP-functionalized scaffolds will be a safer, more feasible and selective strategy for endogenous BMP stimulating and binding. Therefore, our data suggests a promising application of using the BBP-decorated gelatin nanofibrous scaffold to stimulate/capture BMPs and promote endogenous bone formation in situ in contrast to relying on the administration of high doses of exogenous BMPs and transplantation of cells.

Hypoxia-Mimicking Nanofibrous Scaffolds Promote Endogenous Bone Regeneration

Utilizing biomimetic materials to potentiate endogenous cell growth or signaling is superior to relying on exogenous cells or signals for bone formation. Desferoxamine (DFO), which is a hypoxia-mimetic agent that chelates iron (Fe³⁺), mimics hypoxia to encourage bone healing. However, high cytotoxicity, off-target effects, and the short half-life of DFO have significantly impeded its further applications. We mitigated these side effects by locally immobilizing DFO onto a gelatin nanofibrous (GF) scaffold that retained DFO's ability to chelate Fe³⁺. Moreover, DFO-functionalized GF (GF-DFO) scaffolds, which have similar micro/macrostructures to GF scaffolds, not only demonstrated decreased cytotoxicity on both human umbilical vein endothelial cells and human mesenchymal stem cells but also significantly increased vascular endothelial growth factor (VEGF) expression in vitro. Most importantly, in our in vivo experiments on a critical-sized cranial bone defect mouse model, a significant amount of bone was formed in most of the GF-DFO scaffolds after six weeks, while very little new bone was observed in the GF scaffolds. These data suggest that use of a hypoxia-mimicking nanofibrous scaffold is a promising strategy for promoting endogenous bone formation.

Strong Bioinspired Polymer Hydrogel with Tunable Stiffness and Toughness for Mimicking the Extracellular Matrix

Inspired by the delicate architecture of hyaline articular cartilage, we report on a biomimetic polymer hydrogel that incorporates strong intermolecular hydrogen bonding between urethane-urethane linkages as well as urethane-ester linkages. The resultant hydrogel, containing ≈75% water, can endure a compressive stress up to 56 MPa with a strain of 98%, and exhibit tunable compressive modulus (0.19-1.38 MPa), as well as toughness (3629-28290 J m^-2) within a wide range. The tensile strength and elastic modulus reach as high as 0.56 and 5.5 MPa, respectively. The high stiffness and toughness enable the gel to withstand cyclic compressive loadings without fracturing. Moreover, our hydrogel mimics the extracellular matrices of cartilage and bone tissues and provides biochemical and physical cues that support the three-dimensional proliferation of chondrocytes and osteogenic differentiation of preosteoblasts.

Osteogenic differentiation of preosteoblasts on a hemostatic gelatin sponge

Bone tissue engineering provides many advantages for repairing skeletal defects. Although many different kinds of biomaterials have been used for bone tissue engineering, safety issues must be considered when using them in a clinical setting. In this study, we examined the effects of using a common clinical item, a hemostatic gelatin sponge, as a scaffold for bone tissue engineering. The use of such a clinically acceptable item may hasten the translational lag from laboratory to clinical studies. We performed both degradation and biocompatibility studies on the hemostatic gelatin sponge, and cultured preosteoblasts within the sponge scaffold to demonstrate its osteogenic differentiation potential. In degradation assays, the gelatin sponge demonstrated good stability after being immersed in PBS for 8 weeks (losing only about 10% of its net weight and about 54% decrease of mechanical strength), but pepsin and collagenases readily biodegraded it. The gelatin sponge demonstrated good biocompatibility to preosteoblasts as demonstrated by MTT assay, confocal microscopy, and scanning electron microscopy. Furthermore, osteogenic differentiation and the migration of preosteoblasts, elevated alkaline phosphatase activity, and in vitro mineralization were observed within the scaffold structure. Each of these results indicates that the hemostatic gelatin sponge is a suitable scaffold for bone tissue engineering.

Chitosan based biocomposite scaffolds for bone tissue engineering

The clinical demand for scaffolds and the diversity of available polymers provide freedom in the fabrication of scaffolds to achieve successful progress in bone tissue engineering (BTE). Chitosan (CS) has drawn much of the attention in recent years for its use as graft material either as alone or in a combination with other materials in BTE. The scaffolds should possess a number of properties like porosity, biocompatibility, water retention, protein adsorption, mechanical strength, biomineralization and biodegradability suited for BTE applications. In this review, CS and its properties, and the role of CS along with other polymeric and ceramic materials as scaffolds for bone tissue repair applications are highlighted.

Advancing biomaterials of human origin for tissue engineering

Biomaterials have played an increasingly prominent role in the success of biomedical devices and in the development of tissue engineering, which seeks to unlock the regenerative potential innate to human tissues/organs in a state of deterioration and to restore or reestablish normal bodily function. Advances in our understanding of regenerative biomaterials and their roles in new tissue formation can potentially open a new frontier in the fast-growing field of regenerative medicine. Taking inspiration from the role and multi-component construction of native extracellular matrices (ECMs) for cell accommodation, the synthetic biomaterials produced today routinely incorporate biologically active components to define an artificial in vivo milieu with complex and dynamic interactions that foster and regulate stem cells, similar to the events occurring in a natural cellular microenvironment. The range and degree of biomaterial sophistication have also dramatically increased as more knowledge has accumulated through materials science, matrix biology and tissue engineering. However, achieving clinical translation and commercial success requires regenerative biomaterials to be not only efficacious and safe but also cost-effective and convenient for use and production. Utilizing biomaterials of human origin as building blocks for therapeutic purposes has provided a facilitated approach that closely mimics the critical aspects of natural tissue with regard to its physical and chemical properties for the orchestration of wound healing and tissue regeneration. In addition to directly using tissue transfers and transplants for repair, new applications of human-derived biomaterials are now focusing on the use of naturally occurring biomacromolecules, decellularized ECM scaffolds and autologous preparations rich in growth factors/non-expanded stem cells to either target acceleration/magnification of the body's own repair capacity or use nature's paradigms to create new tissues for restoration. In particular, there is increasing interest in separating ECMs into simplified functional domains and/or biopolymeric assemblies so that these components/constituents can be discretely exploited and manipulated for the production of bioscaffolds and new biomimetic biomaterials. Here, following an overview of tissue auto-/allo-transplantation, we discuss the recent trends and advances as well as the challenges and future directions in the evolution and application of human-derived biomaterials for reconstructive surgery and tissue engineering. In particular, we focus on an exploration of the structural, mechanical, biochemical and biological information present in native human tissue for bioengineering applications and to provide inspiration for the design of future biomaterials.

Maxillary sinus floor augmentation and dental implant placement using dentin matrix protein-1 gene-modified bone marrow stromal cells mixed with deproteinized boving bone: A comparative study in beagles

OBJECTIVE

The aim of the study was to evaluate the effects of the combined use of dentin matrix protein-1 (DMP1) gene-modified bone marrow stromal cells (BMSCs) and Bio-Oss(®) for maxillary sinus floor augmentation (MSFA) implant placement in dogs.

MATERIALS AND METHODS

BMSCs were derived from bone marrow of six beagles and cultured. The cells were transduced with a lentiviral vector overexpressing the DMP1 gene and enhanced green fluorescent protein (EGFP) gene (Lenti-DMP1/EGFP) in test group, and with a lentiviral vector encoding EGFP gene (Lenti-EGFP) in control group. Six dogs received sinus augmentations using the bilateral approach with a simultaneous implant placement at each site respectively. At the same concentration, 2×10(7) cells/ml, one sinus was grafted using a mixture of autologous DMP1/EGFP gene-modified BMSCs and Bio-Oss(®) (DMP1 group), and the contralateral sinus was grafted with autologous EGFP gene-modified bMSCs and Bio-Oss(®) (EGFP group). After a 3 month healing period, bone regeneration and osseointegration were evaluated using histologic and histomorphometric methods.

RESULTS

The bone-implant contact (BIC) and the bone area fraction in the DMP1 group (BIC: 34.67%±8.23%, bone area fraction: 35.16%±3.32%) were significantly greater compared with the EGFP group (BIC: 26.06%±5.16%, bone area fraction: 20.74%±1.63%) (P<0.05). No significant difference between the residual bone substitute material volume (BSMV) in the DMP1 group (35.86±7.35) and the EGFP group (32.16±9.16) was found in our study (P>0.05).

CONCLUSION

BMSCs modified with the DMP1 gene can be used as an adjunct to Bio-Oss(®) to enhance new bone formation and the osseointegration of dental implants in MSFA of dogs.

Hierarchical Nanofibrous Microspheres with Controlled Growth Factor Delivery for Bone Regeneration

The integration of controlled growth factor delivery and biomimetic architecture into a microsphere is a challenging but attractive strategy for developing new injectable biomaterials. In this work, a unique hierarchical nanosphere-encapsulated-in-microsphere scaffolding system is developed. First, heparin-conjugated gelatin (HG) is synthesized, which provides binding domains for bone morphogenetic protein 2 (BMP2) to stabilize this growth factor, protect it from denaturation and proteolytic degradation, and subsequently prolong its sustained release. Next, a unique approach is developed which includes a water-in-oil-in-oil double emulsion process and a thermally induced phase separation to encapsulate BMP2-binding HG nanospheres into nanofibrous microspheres. The nanofibrous microsphere is self-assembled from synthetic nanofibers, and has superior surface area, high porosity, low density, and is an excellent carrier to support cell adhesion and tissue in-growth. BMP2 in the hierarchical microsphere is released in a multiple-controlled manner by the binding with heparin and encapsulation of the nanosphere and microsphere. An in vivo calvarial defect model confirms that this microsphere is an excellent osteoinductive scaffold for enhanced bone regeneration. By choosing different growth factors, this hierarchical microsphere system can easily be applied to other types of tissue regeneration. The work expands the ability to develop new injectable biomaterials for advanced regenerative therapies.

Complete pulpodentin complex regeneration by modulating the stiffness of biomimetic matrix

Dental caries is one of the most prevalent chronic diseases in all populations. The regeneration of dentin-pulp tissues (pulpodentin) using a scaffold-based tissue engineering strategy is a promising approach to replacing damaged dental structures and restoring their biological functions. However, the current scaffolding design for pulpodentin regeneration does not take into account the distinct difference between pulp and dentin, therefore, is incapable of regenerating a complete tooth-like pulpodentin complex. In this study, we determined that scaffolding stiffness is a crucial biophysical cue to modulate dental pulp stem cell (DPSC) differentiation. The DPSCs on a high-stiffness three-dimensional (3D) nanofibrous gelatin (NF-gelatin) scaffold had more organized cytoskeletons and a larger spreading area than on a low-stiffness NF-gelatin scaffold. In the same differentiation medium, a high-stiffness NF-gelatin facilitated DPSC differentiation to form a mineralized tissue, while a low-stiffness NF-gelatin promoted a soft pulp-like tissue formation from the DPSCs. A facile method was then developed to integrate the low- and high-stiffness gelatin matrices into a single scaffold (S-scaffold) for pulpodentin complex regeneration. A 4-week in vitro experiment showed that biomineralization took place only in the high-stiffness peripheral area and formed a ring-like structure surrounding the non-mineralized central area of the DPSC/S-scaffold construct. A complete pulpodentin complex similar to natural pulpodentin was successfully regenerated after subcutaneous implantation of the DPSC/S-scaffold in nude mice for 4weeks. Histological staining showed a significant amount of extracellular matrix (ECM) formation in the newly formed pulpodentin complex, and a number of blood vessels were observed in the pulp tissue. Taken together, this work shows that modulating the stiffness of the NF-gelatin scaffold is a successful approach to regenerating a complete tooth-like pulpodentin complex.

Injectable gelatin derivative hydrogels with sustained vascular endothelial growth factor release for induced angiogenesis

Injectable biomaterials are attractive for soft tissue regeneration because they are handled in a minimally invasive manner and can easily adapt to complex defects. However, inadequate vascularization of the injectable constructs has long been a barrier, leading to necrosis or volume reduction after implantation. In this work, we developed a three-step process to synthesize injectable gelatin-derived hydrogels that are capable of controlling growth factor delivery to induce angiogenesis. In our approach, tyramine was first introduced into gelatin chains to provide enzymatic crosslinking points for gel formation after injection. Next, heparin, a polysaccharide with binding domains to many growth factors, was covalently linked to the tyramine-modified gelatin. Finally, vascular endothelial growth factor (VEGF) was incorporated into the gelatin derivative by binding with the heparin in the gelatin derivative, and an injectable gel with controlled VEGF release was formed by an enzymatic catalytic reaction with hydrogen peroxide (H2O2) and horseradish peroxidase (HRP). The gelation time, mechanical properties and degradation of the gel was readily tailored by the gelatin concentration and the ratio of H2O2/HRP. Binding VEGF to heparin stabilizes this growth factor, protects it from denaturation and proteolytic degradation and subsequently prolongs the sustained release. An in vitro release study and bioactivity assay indicated that the VEGF was released in a sustained manner with high bioactivity for over 3 weeks. Furthermore, a chicken chorioallantoic membrane (CAM) assay and animal experiments were performed to evaluate in vivo bioactivity of the VEGF released from the hydrogels. After 5 days of incubation on CAM, the number of blood vessels surrounding the heparin-modified hydrogels was increased by 2.4-fold compared with that of the control group. Deeper and denser cell infiltration and angiogenesis in the heparin-modified gelatin/VEGF gels were observed compared to the controls after being subcutaneously injected in the dorsal side of the mice for 2 weeks. Interestingly, even without the incorporation of VEGF, the heparin-modified gelatin derivative still had the capability to induce angiogenesis to a certain degree. Our results suggest that the gelatin derivative/VEGF is an excellent injectable delivery system for induced angiogenesis of soft tissue regeneration.

Chitosan-based scaffolds for bone tissue engineering

Bone defects requiring grafts to promote healing are frequently occurring and costly problems in health care. Chitosan, a biodegradable, naturally occurring polymer, has drawn considerable attention in recent years as scaffolding material in tissue engineering and regenerative medicine. Chitosan is especially attractive as a bone scaffold material because it supports the attachment and proliferation of osteoblast cells as well as formation of mineralized bone matrix. In this review, we discuss the fundamentals of bone tissue engineering and the unique properties of chitosan as a scaffolding material to treat bone defects for hard tissue regeneration. We present the common methods for fabrication and characterization of chitosan scaffolds, and discuss the influence of material preparation and addition of polymeric or ceramic components or biomolecules on chitosan scaffold properties such as mechanical strength, structural integrity, and functional bone regeneration. Finally, we highlight recent advances in development of chitosan-based scaffolds with enhanced bone regeneration capability.

Magnesium-containing nanostructured hybrid scaffolds for enhanced dentin regeneration

Dental caries is one of the most prevalent chronic diseases in the United States, affecting 92% of adults aged 20-64 years. Scaffold-based tissue engineering represents a promising strategy to replace damaged dental structures and restore their biological functions. Current single-component scaffolding materials used for dental tissue regeneration, however, cannot provide the proper microenvironment for dental stem/progenitor cell adhesion, proliferation, and differentiation; new biomimetic hybrid scaffolds are needed to promote better dental tissue formation. In this work, we developed a biomimetic approach to prepare three-dimensional (3D) nanofibrous gelatin/magnesium phosphate (NF-gelatin/MgP) hybrid scaffolds. These scaffolds not only mimic the nanostructured architecture and the chemical composition of natural dentin matrices but also constantly present favorable chemical signals (Mg ions) to dental pulp stem cells (DPSCs), thus providing a desirable microenvironment to facilitate DPSC proliferation, differentiation, and biomineralization. Synthesized hybrid NF-gelatin/MgP possesses natural extracellular matrix (ECM)-like architecture, high porosity, high pore interconnectivity, well-defined pore size, and controlled Mg ion release from the scaffold. Adding MgP into NF-gelatin also increased the mechanical strength of the hybrid scaffold. The sustained release of Mg ions from the NF-gelatin/MgP (MgP=10% wt/wt) scaffold significantly enhanced the proliferation, differentiation, and biomineralization of human DPSCs in vitro. The alkaline phosphatase (ALP) activity and the gene expressions for odontogenic differentiation (collagen I [Col I], ALP, osteocalcin [OCN], dentin sialophosphoprotein [DSPP], and dentin matrix protein 1 [DMP1]) were all significantly higher (p<0.05) in the NF-gelatin/MgP group than in the NF-gelatin group. Those results were further confirmed by hematoxylin and eosin (H&E) and von Kossa staining, as shown by greater ECM secretion and mineral deposition in the hybrid scaffold. Consistent with the in vitro study, the DPSCs/NF-gelatin/MgP constructs produced greater ECM deposition, hard tissue formation, and expression of marker proteins (DSPP, DMP1, Col I) for odontogenic differentiation than did the DPSCs/NF-gelatin after 5 weeks of ectopic implantation in rude mice. The controlled release of metallic ions from biomimetic nanostructured hybrid scaffolds, therefore, is a promising approach to enhancing the biological capability of the scaffolds for dental tissue regeneration.