45S5-Bioglass(®)-based 3D-scaffolds seeded with human adipose tissue-derived stem cells induce in vivo vascularization in the CAM angiogenesis assay

The biological and therapeutic assessment of a P(3HB-co-4HB)-bioactive glass-graphene composite biomaterial for tissue regeneration

An ideal wound dressing should create a healing environment that relieves pain, protects against infections, maintains moisture, removes debris, and speeds up wound closure and repair. However, conventional options like gauze often fall short in fulfilling these requirements, especially for chronic or nonhealing wounds. Hence there is a critical need for inventive formulations that offer efficient, cost-effective, and eco-friendly alternatives. This study focuses on assessing the innovative formulation based on a microbial-derived copolymer known as poly(3-hydroxybutyrate-co-4-hydroxybutyrate), P(3HB-co-4HB) bioactive glass and graphene particles, and exploring their biological response in vitro and in vivo-to find the best combination that promotes cell adhesion and enhances wound healing. The formulation optimized at concentration of bioactive glass (1 w/w%) and graphene (0.01 w/w%) showed accelerated degradation and enhanced blood vessel formation. Meanwhile biocompatibility was evaluated using murine osteoblasts, human dermal fibroblasts, and standard cell culture assays, demonstrating no adverse effects after 7 days of culture and well-regulated inflammatory kinetics. Whole thickness skin defect using mice indicated the feasibility of the biocomposites for a faster wound closure and reduced inflammation. Overall, this biocomposite appears promising as an ideal wound dressing material and positively influencing wound healing rates.

A tissue engineered 3D printed calcium alkali phosphate bioceramic bone graft enables vascularization and regeneration of critical-size discontinuity bony defects in vivo

Introduction: Recently, efforts towards the development of patient-specific 3D printed scaffolds for bone tissue engineering from bioactive ceramics have continuously intensified. For reconstruction of segmental defects after subtotal mandibulectomy a suitable tissue engineered bioceramic bone graft needs to be endowed with homogenously distributed osteoblasts in order to mimic the advantageous features of vascularized autologous fibula grafts, which represent the standard of care, contain osteogenic cells and are transplanted with the respective blood vessel. Consequently, inducing vascularization early on is pivotal for bone tissue engineering. The current study explored an advanced bone tissue engineering approach combining an advanced 3D printing technique for bioactive resorbable ceramic scaffolds with a perfusion cell culture technique for pre-colonization with mesenchymal stem cells, and with an intrinsic angiogenesis technique for regenerating critical size, segmental discontinuity defects in vivo applying a rat model. To this end, the effect of differing Si-CAOP (silica containing calcium alkali orthophosphate) scaffold microarchitecture arising from 3D powder bed printing (RP) or the Schwarzwalder Somers (SSM) replica fabrication technique on vascularization and bone regeneration was analyzed in vivo. In 80 rats 6-mm segmental discontinuity defects were created in the left femur. Methods: Embryonic mesenchymal stem cells were cultured on RP and SSM scaffolds for 7d under perfusion to create Si-CAOP grafts with terminally differentiated osteoblasts and mineralizing bone matrix. These scaffolds were implanted into the segmental defects in combination with an arteriovenous bundle (AVB). Native scaffolds without cells or AVB served as controls. After 3 and 6 months, femurs were processed for angio-µCT or hard tissue histology, histomorphometric and immunohistochemical analysis of angiogenic and osteogenic marker expression. Results: At 3 and 6 months, defects reconstructed with RP scaffolds, cells and AVB displayed a statistically significant higher bone area fraction, blood vessel volume%, blood vessel surface/volume, blood vessel thickness, density and linear density than defects treated with the other scaffold configurations. Discussion: Taken together, this study demonstrated that the AVB technique is well suited for inducing adequate vascularization of the tissue engineered scaffold graft in segmental defects after 3 and 6 months, and that our tissue engineering approach employing 3D powder bed printed scaffolds facilitated segmental defect repair.

Chorioallantoic Membrane Assay at the Cross-Roads of Adipose-Tissue-Derived Stem Cell Research

With a history of more than 100 years of different applications in various scientific fields, the chicken chorioallantoic membrane (CAM) assay has proven itself to be an exceptional scientific model that meets the requirements of the replacement, reduction, and refinement principle (3R principle). As one of three extraembryonic avian membranes, the CAM is responsible for fetal respiration, metabolism, and protection. The model provides a unique constellation of immunological, vascular, and extracellular properties while being affordable and reliable at the same time. It can be utilized for research purposes in cancer biology, angiogenesis, virology, and toxicology and has recently been used for biochemistry, pharmaceutical research, and stem cell biology. Stem cells and, in particular, mesenchymal stem cells derived from adipose tissue (ADSCs) are emerging subjects for novel therapeutic strategies in the fields of tissue regeneration and personalized medicine. Because of their easy accessibility, differentiation profile, immunomodulatory properties, and cytokine repertoire, ADSCs have already been established for different preclinical applications in the files mentioned above. In this review, we aim to highlight and identify some of the cross-sections for the potential utilization of the CAM model for ADSC studies with a focus on wound healing and tissue engineering, as well as oncological research, e.g., sarcomas. Hereby, the focus lies on the combination of existing evidence and experience of such intersections with a potential utilization of the CAM model for further research on ADSCs.

Poly-ε-caprolactone/poly(rotaxane) seeded with human dental pulp stem cells or osteoblasts promotes angiogenesis: a chorioallantoic membrane assay

Biomaterials used for tissue regeneration should ideally provide a favorable environment for cell proliferation and differentiation. Angiogenesis is crucial for supplying oxygen and nutrients necessary for cellular survival at implantation sites. The aim of this study was to evaluate the overall angiogenesis response of a poly ε-caprolactone/poly (rotaxane) blend (poly-blend) carried by human dental pulp stem cells (hDPSCs) or osteoblasts (OB) seeded in the chorioallantoic membranes (CAM) of fertilized chicken eggs on embryonic day 7. They were classified into the following intervention groups: (a) poly(polymeric blend disks free of cells); (b) hDPSC seeded onto CAM; (c) poly/hDPSC (where hDPSCs were seeded onto poly-blend); (d) poly/OB (where osteoblasts were seeded onto poly); (e) OB (where hDPSCs differentiated into osteoblasts were seeded onto CAM); and (f) a negative control when a sterilized silicone ring free of cells or polymer was inserted into CAM. On embryonic day 14, the quantitative and qualitative characteristics of the blood vessels in the CAMs were analyzed macroscopically and microscopically. Macroscopic examination showed that the Poly/hDPSC samples exhibited an increased medium vessel density. Additionally, microscopic observations showed that the Poly/hDPSC group and poly alone resulted in a large lumen area of vascularization. Thus, poly ε-caprolactone/poly (rotaxane) did not impair angiogenesis. Furthermore, poly-blend carried by stem cells of dental pulp origin shows a better vasculogenic potential, which is essential for regenerative therapies.

Porous biomaterials for tissue engineering: a review

The field of biomaterials has grown rapidly over the past decades. Within this field, porous biomaterials have played a remarkable role in: (i) enabling the manufacture of complex three-dimensional structures; (ii) recreating mechanical properties close to those of the host tissues; (iii) facilitating interconnected structures for the transport of macromolecules and cells; and (iv) behaving as biocompatible inserts, tailored to either interact or not with the host body. This review outlines a brief history of the development of biomaterials, before discussing current materials proposed for use as porous biomaterials and exploring the state-of-the-art in their manufacture. The wide clinical applications of these materials are extensively discussed, drawing on specific examples of how the porous features of such biomaterials impact their behaviours, as well as the advantages and challenges faced, for each class of the materials.

Bioglass promotes wound healing by inhibiting endothelial cell pyroptosis through regulation of the connexin 43/reactive oxygen species (ROS) signaling pathway

Bioactive glass (BG) has recently shown great promise in soft tissue repair, especially in wound healing; however, the underlying mechanism remains unclear. Pyroptosis is a novel type of programmed cell death that is involved in various traumatic injury diseases. Here, we hypothesized that BG may promote wound healing through suppression of pyroptosis. To test this scenario, we investigated the possible effect of BG on pyroptosis in wound healing both in vivo and in vitro. This study showed that BG can accelerate wound closure, granulation formation, collagen deposition, and angiogenesis. Moreover, western blot analysis and immunofluorescence staining revealed that BG inhibited the expression of pyroptosis-related proteins in vivo and in vitro. In addition, while BG regulated the expression of connexin43 (Cx43), it inhibited reactive oxygen species (ROS) production. Cx43 activation and inhibition experiments further indicate that BG inhibited pyroptosis in endothelial cells by decreasing Cx43 expression and ROS levels. Taken together, these studies suggest that BG promotes wound healing by inhibiting pyroptosis via Cx43/ROS signaling pathway.

A co-delivery platform for synergistic promotion of angiogenesis based on biodegradable, therapeutic and self-reporting luminescent porous silicon microparticles

Insufficient angiogenesis happened in body defects such as ulceration, coronary heart disease, and chronic wounds constitutes a major challenge in tissue regeneration engineering. Owing to the poor bioactivity and maintenance of pro-angiogenic cells and factors during transplantation, new bioactive materials to tackle the barrier are highly desirable. Herein, we demonstrate a co-delivery platform for synergistic promotion of angiogenesis based on biodegradable, therapeutic, and self-reporting luminescent porous silicon (PSi) microparticles. The biodegradable and biocompatible PSi microparticles could quickly release therapeutic Si ions, which is bioactive to promote cell migration, tube formation, and angiogenic gene expression in vitro. To construct a highly efficient angiogenesis treatment platform, vascular endothelial growth factor (VEGF) was electrostatically adsorbed by PSi microparticles for effective drug loading and delivery. The dual therapeutic components (Si ions and VEGF) could release with the dissolution of Si skeleton, accompanying by the decay of photoluminescence (PL) intensity and blue shift of the maximum PL wavelength. Therefore, real-time drug release could be self-reported and assessed with the two-dimensional PL signal. The co-delivery of Si ions and VEGF displayed synergistic effect and highly efficient angiogenesis, which was evidenced by the enhancement of endothelial cell migration and tube formation in vitro with approximately 1.5-5 times higher than control. The blood vessel formation in vivo was also significantly improved as shown by the chick chorioallantoic membrane (CAM) model, in which the total length, size and junctions exhibited 2.1 ± 0.4, 4 ± 0.4, and 3.9 ± 0.3 times in comparison to control, respectively. The PSi and VEGF co-delivery system display great potential in tissue engineering as a biodegradable and self-reporting theranostic platform to promote angiogenesis.

Evaluating the Effect of Non-cellular Bioactive Glass-Containing Scaffolds on Osteogenesis and Angiogenesis in in vivo Animal Bone Defect Models

The use of bone scaffolds to replace injured or diseased bone has many advantages over the currently used autologous and allogeneic options in clinical practice. This systematic review evaluates the current evidence for non-cellular scaffolds containing bioactive glass on osteogenesis and angiogenesis in animal bone defect models. Studies that reported results of osteogenesis via micro-CT and results of angiogenesis via Microfil perfusion or immunohistochemistry were included in the review. A literature search of PubMed, EMBASE and Scopus was carried out in November 2019 from which nine studies met the inclusion and exclusion criteria. Despite the significant heterogeneity in the composition of the scaffolds used in each study, it could be concluded that scaffolds containing bioactive glass improve bone regeneration in these models, both by osteogenic and angiogenic measures. Incorporation of additional elements into the glass network, using additives, and using biochemical factors generally had a beneficial effect. Comparing the different compositions of non-cellular bioactive glass containing scaffolds is however difficult due to the heterogeneity in bioactive glass compositions, fabrication methods and biochemical additives used.

Chorioallantoic Membrane Assay as Model for Angiogenesis in Tissue Engineering: Focus on Stem Cells

Tissue engineering aims to structurally and functionally regenerate damaged tissues, which requires the formation of new blood vessels that supply oxygen and nutrients by the process of angiogenesis. Stem cells are a promising tool in regenerative medicine due to their combined differentiation and paracrine angiogenic capacities. The study of their proangiogenic properties and associated potential for tissue regeneration requires complex in vivo models comprising all steps of the angiogenic process. The highly vascularized extraembryonic chorioallantoic membrane (CAM) of fertilized chicken eggs offers a simple, easy accessible, and cheap angiogenic screening tool compared to other animal models. Although the CAM assay was initially primarily performed for evaluation of tumor growth and metastasis, stem cell studies using this model are increasing. In this review, a detailed summary of angiogenic observations of different mesenchymal, cardiac, and endothelial stem cell types and derivatives in the CAM model is presented. Moreover, we focus on the variation in experimental setup, including the benefits and limitations of in ovo and ex ovo protocols, diverse biological and synthetic scaffolds, imaging techniques, and outcome measures of neovascularization. Finally, advantages and disadvantages of the CAM assay as a model for angiogenesis in tissue engineering in comparison with alternative in vivo animal models are described. Impact statement The chorioallantoic membrane (CAM) assay is an easy and cheap screening tool for the angiogenic properties of stem cells and their associated potential in the tissue engineering field. This review offers an overview of all published angiogenic studies of stem cells using this model, with emphasis on the variation in used experimental timeline, culture protocol (in ovo vs. ex ovo), stem cell type (derivatives), scaffolds, and outcome measures of vascularization. The purpose of this overview is to aid tissue engineering researchers to determine the ideal CAM experimental setup based on their specific study goals.

Evolving applications of the egg: chorioallantoic membrane assay and ex vivo organotypic culture of materials for bone tissue engineering

The chick chorioallantoic membrane model has been around for over a century, applied in angiogenic, oncology, dental and xenograft research. Despite its often perceived archaic, redolent history, the chorioallantoic membrane assay offers new and exciting opportunities for material and growth factor evaluation in bone tissue engineering. Currently, superior/improved experimental methodology for the chorioallantoic membrane assay are difficult to identify, given an absence of scientific consensus in defining experimental approaches, including timing of inoculation with materials and the analysis of results. In addition, critically, regulatory and welfare issues impact upon experimental designs. Given such disparate points, this review details recent research using the ex vivo chorioallantoic membrane assay and the ex vivo organotypic culture to advance the field of bone tissue engineering, and highlights potential areas of improvement for their application based on recent developments within our group and the tissue engineering field.

Bioactive glass functionalized chondroitin sulfate hydrogel with proangiogenic properties

Blood vessels play an important role in bone defect repair and growth, and a critical challenge of bone defect repair is the promotion of blood vessel formation. Most of the current methods promote vascularization by adding specific growth factors, which are costly and easy to inactivate. In this study, we developed a covalently cross-linked aminated bioactive glass nanoparticle-chondroitin sulfate methacrylate (ABGN-CSMA) organic-inorganic composite hydrogel with angiogenic properties. The amino groups of the ABGNs form covalent bonds with the carboxyl groups on CSMA. Surface amination modification of BGNs not only improved the dispersion of BGNs in CSMA but also significantly improved the mechanical properties of the composite hydrogel. The largest storage modulus (1200 Pa), the largest loss modulus (560 Pa) and the strongest resistance to deformation of the hydrogel are seen at 10% concentration of ABGNs. Simultaneously, the local pH stability and sustained ion release of the composite hydrogel are conducive to cell adhesion, proliferation, and angiogenesis. This work provides evidence for the development of covalently cross-linked organic-inorganic composite hydrogels with angiogenic properties.

Collagen scaffolds functionalised with copper-eluting bioactive glass reduce infection and enhance osteogenesis and angiogenesis both in vitro and in vivo

The bone infection osteomyelitis (typically by Staphylococcus aureus) usually requires a multistep procedure of surgical debridement, long-term systemic high-dose antibiotics, and - for larger defects - bone grafting. This, combined with the alarming rise in antibiotic resistance, necessitates development of alternative approaches. Herein, we describe a one-step treatment for osteomyelitis that combines local, controlled release of non-antibiotic antibacterials with a regenerative collagen-based scaffold. To maximise efficacy, we utilised bioactive glass, an established osteoconductive material with immense capacity for bone repair, as a delivery platform for copper ions (proven antibacterial, angiogenic, and osteogenic properties). Multifunctional collagen-copper-doped bioactive glass scaffolds (CuBG-CS) were fabricated with favourable microarchitectural and mechanical properties (up to 1.9-fold increase in compressive modulus over CS) within the ideal range for bone tissue engineering. Scaffolds demonstrated antibacterial activity against Staphylococcus aureus (up to 66% inhibition) whilst also enhancing osteogenesis (up to 3.6-fold increase in calcium deposition) and angiogenesis in vitro. Most significantly, when assessed in a chick embryo in vivo model, CuBG-CS not only demonstrated biocompatibility, but also a significant angiogenic and osteogenic response, consistent with in vitro studies. Collectively, these results indicate that the CuBG-CS developed here show potential as a one-step osteomyelitis treatment: reducing infection, whilst enhancing bone healing.

Crystallization behavior of SiO2–P2O5–CaO–MgO–Na2O–K2O bioactive glass powder

The crystallization process of a bioactive silicate glass with 47.5SiO2-10Na2O-10K2O-10MgO-20CaO-2.5P2O5 molar composition was investigated by using nonisothermal differential t hermal a nalysis (DTA). T he DTA plots recorded at different heating rates exhibited a single crystallization peak. The activation energy for crystallization was estimated by applying the equations proposed by Kissinger and Matusita-Sakka. The Johnson-Mehl-Avrami exponent (n) was assessed by using the Ozawa and Augis-Bennett methods. The analyses suggest that a surface crystallization mechanism with one-dimensional crystal growth is predominant. The activation energy for viscous flow was also assessed (176 kJ/mol) and was found lower than the activation energy for crystallization (271 kJ/mol). This confirms the stability of 47.5B against crystallization and its good sinterability, which is a highly attractive feature for producing glass products of biomedical interest, such as bioactive porous scaffolds for bone repair.

Bioactive Injectable Hydrogels Containing Desferrioxamine and Bioglass for Diabetic Wound Healing

Diabetic wound is hard to heal mainly because of the difficulty in vascularization in the wound area. Accumulating results have shown that desferrioxamine (DFO) can promote secretion of hypoxia inducible factor-1 (HIF-1α), thereby upregulating the expression of angiogenic growth factors and facilitating revascularization. Our preliminary study has demonstrated that Si ions in bioglass (BG) can upregulate vascular endothelial growth factor (VEGF) expression, thus promoting revascularization. It is hypothesized that the combined use of BG and DFO may have a synergistic effect in promoting VEGF expression and revascularization. To prove this, we first determined DFO concentration range that had no apparent cytotoxicity on human umbilical vein endothelial cells (HUVECs). Then, the optimal concentration of DFO promoting tube formation of HUVECs was determined by cell migration and tube formation assays. In addition, we demonstrated that combination use of BG and DFO improved the migration and tube formation of HUVECs as compared with the use of either BG or DFO alone as BG and DFO could synergistically upregulate VEGF expression. Furthermore, a sodium alginate hydrogel containing both BG and DFO was developed, and this hydrogel better facilitated diabetic skin wound healing than the use of either BG or DFO alone as BG and DFO in the hydrogels worked synergistically in promoting HIF-1α and VEGF expression and subsequently vascularization in the wound sites. Therefore, in this study, the synergistic effect in promoting revascularization between BG and DFO was first demonstrated and an injectable hydrogel simultaneously containing BG and DFO was developed for enhancing repair of diabetic chronic skin defects by taking advantages of the synergistic effects of BG and DFO in promoting revascularization. The study opens up a new prospect for the development of skin repair-promoting biomaterials.

Time-Phase Sequential Utilization of Adipose-Derived Mesenchymal Stem Cells on Mesoporous Bioactive Glass for Restoration of Critical Size Bone Defects

The effective transportation of oxygen, nutrients, and metabolic wastes through new blood vessel networks is key to the survival of engineered constructs in large bone defects. Adipose-derived mesenchymal stem cells (ADSCs), which are regarded as excellent candidates for both bone and blood vessel engineering, are the preferred option for the restoration of massive bone defects. Therefore, we propose to induce ADSCs into osteogenic and endothelial cells differently. A modified hierarchical mesoporous bioactive glass (MBG) scaffold with an enhanced compressive strength was constructed and prevascularized by seeding with endothelial-induced ADSCs (EI-ADSCs). The prevascularized scaffolds were combined with osteogenically induced ADSCs (OI-ADSCs) to repair critical-size bone defects. To validate the angiogenesis of the prevascularized MBG scaffolds in vivo, green fluorescent protein (GFP) was used to label EI-ADSCs. The labeled EI-ADSCs were demonstrated to survive and participate in vascularization at day 7 after subcutaneous implantation in nude mice by double immunofluorescence staining of CD31 and GFP. Regarding the restoration of critical size bone defects, early angiogenesis of rat femur plug defects was evaluated by perfusion of Microfil after 3 weeks. Compared to nonvascularized MBG carrying OI-ADSCs (MBG/OI-ADSCs) and non-cell-seeded MBG scaffolds, the prevascularized MBG carrying OI-ADSCs (Pv-MBG/OI-ADSCs) showed enhanced angiogenesis on the surface and interior. Through dynamic bone formation analysis with sequential fluorescent labeling and Van Gieson's picro-fuchsin staining, we found that the Pv-MBG/OI-ADSCs exhibited the highest mineral deposition rate after surgery, which may be contributed by rapid vascular anastomosis facilitating increased survival of the seeded OI-ADSCs and by the recruitment function for bone mesenchymal stem cells. Therefore, the strategy of time-phase sequential utilization of ADSCs on MBG scaffolds is a practical design for the repair of massive bone defects.

Development of mesoporous bioactive glass nanoparticles and its use in bone tissue engineering

The incidence of bone disorders, from trauma, tissue degeneration due to ageing, pathological conditions to cancer, has been increasing. The pursuit for bone graft substitutes to assist in regenerating large bone defects is ever growing as a result of the shortage in conventional autografts and allografts, in addition to the associated risks of disease transmission. However, the use of alloplastic biomaterials is limited in clinical settings, as further investigations are required to address the properties of synthetic grafts to mimic the native bone tissue and deliver desirable biomolecules to facilitate bone regeneration. This review discusses the fundamental structure and properties of bone with the emphasis on organic and inorganic components that are important for the biomaterial design. The main focus will be on the advancement and usage of bioactive glass (BG) for bone tissue engineering due to its similarity to the natural inorganic constituent of bone. The various BG synthetic processes, modifications of composition, as well as the biomolecule delivery will be discussed in great detail. As the properties of BG are tuneable according to clinical needs, it creates a new paradigm in addition to displaying its superior potential for bone tissue engineering and translational medicine in the field of orthopedic surgery. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 2878-2887, 2018.

Copper-containing mesoporous bioactive glass promotes angiogenesis in an in vivo zebrafish model

The osteogenic and angiogenic responses of organisms to the ionic products of degradation of bioactive glasses (BGs) are being intensively investigated. The promotion of angiogenesis by copper (Cu) has been known for more than three decades. This element can be incorporated to delivery carriers, such as BGs, and the materials used in biological assays. In this work, Cu-containing mesoporous bioactive glass (MBG) in the SiO₂-CaO-P₂O₅ compositional system was prepared incorporating 5% mol Cu (MBG-5Cu) by replacement of the corresponding amount of Ca. The biological effects of the ionic products of MBG biodegradation were evaluated on a well-known endothelial cell line, the bovine aorta endothelial cells (BAEC), as well as in an in vivo zebrafish (Danio rerio) embryo assay. The results suggest that ionic products of both MBG (Cu free) and MBG-5Cu materials promote angiogenesis. In vitro cell cultures show that the ionic dissolution products of these materials are not toxic and promote BAEC viability and migration. In addition, the in vivo assay indicates that both exposition and microinjection of zebrafish embryos with Cu free MBG material increase vessel number and thickness of the subintestinal venous plexus (SIVP), whereas assays using MBG-5Cu enhance this effect.

STATEMENT OF SIGNIFICANCE

Mesoporous bioactive glasses (MBGs) with high specific surface area, well-ordered pores, large pore volumes and controllable amount of ions are interesting to develop controlled drug delivery systems for bone tissue regeneration. Copper (Cu) incorporation to the basic SiO₂-CaO-P₂O₅ composition has attracted high interest due to its multifunctional biological properties. Promotion of angiogenesis is one of these properties, which can be integrated to the biomaterial with lower cost and higher stability when compared with growth factors. This work reports the synthesis and characterization of Cu-containing MBG evaluating its angiogenic properties in the subintestinal vessel zebrafish assay. This transgenic in vivo assay is merging as an alternative model providing short-time consuming protocols and facilities during pro-angiogenic drug screenings. The report shows that the ionic products of this MBG material delivered to the zebrafish incubation media significantly enhance angiogenesis in comparison with control groups. Besides, results indicate Cu ions may exhibit a synergic effect with Si, Ca, and P ions in angiogenesis stimulation both in vitro and in vivo. To our knowledge, this is the first time that zebrafish in vivo assays are used to evaluate angiogenic activity of ionic dissolution products from MBG materials.

PEG hydrogel containing calcium-releasing particles and mesenchymal stromal cells promote vessel maturation

The use of human mesenchymal stromal cells (hMSC) for treating diseased tissues with poor vascularization has received significant attention, but low cell survival has hampered its translation to the clinic. Bioglasses and glass-ceramics have also been suggested as therapeutic agents for stimulating angiogenesis in soft tissues, but these effects need further evaluation in vivo. In this study, calcium-releasing particles and hMSC were combined within a hydrogel to examine their vasculogenic potential in vitro and in vivo. The particles provided sustained calcium release and showed proangiogenic stimulation in a chorioallantoic membrane (CAM) assay. The number of hMSC encapsulated in a degradable RGD-functionalized PEG hydrogel containing particles remained constant over time and IGF-1 release was increased. When implanted in the epidydimal fat pad of immunocompromised mice, this composite material improved cell survival and stimulated vessel formation and maturation. Thus, the combination of hMSC and calcium-releasing glass-ceramics represents a new strategy to achieve vessel stabilization, a key factor in the revascularization of ischemic tissues.

STATEMENT OF SIGNIFICANCE

Increasing blood vessel formation in diseased tissues with poor vascularization is a current clinical challenge. Cell therapy using human mesenchymal stem cells has received considerable interest, but low cell survival has hampered its translation to the clinic. Bioglasses and glass-ceramics have been explored as therapeutic agents for stimulating angiogenesis in soft tissues, but these effects need further evaluation in vivo. By incorporating both human mesenchymal stem cells and glass-ceramic particles in an implantable hydrogel, this study provides insights into the vasculogenic potential in soft tissues of the combined strategies. Enhancement of vessel formation and maturation supports further investigation of this strategy.

Biocompatibility of polypropylene mesh scaffold with adipose-derived stem cells

In this study, we investigated the rejection of the synthetic patch and human tissues in the host. We observed the growth of adipose-derived stem cells (ADSCs) cultured with polypropylene mesh in vitro. The results of flow cytometry showed that the expression of CD44, CD73, CD90, CD45, CD14 and CD34 was 98.54, 95.32, 98.49, 1.21, 3.01 and 2.14%, respectively. ADSCs were isolated from rabbit subcutaneous adipose tissue after collagenase digestion, filtration and centrifugation. The ADSCs of passage 3 were seeded onto the polypropylene mesh scaffolds. New Zealand White female breeder rabbits were implanted with polypropylene mesh, ADSC-fixed polypropylene mesh in the abdomen. After 4 weeks, adhesion was performed and the erosion of the mesh was evaluated. It was found that polypropylene mesh, ADSC-fixed polypropylene mesh all had different degrees of corrosion, and adhesion, but polypropylene mesh was more corroded. ADSC-fixed polypropylene mesh induced a milder chronic inflammation response compared with polypropylene, had significantly lower scores for inflammation (t=11.083), and had significantly higher scores for neovascularization (t=14.362) and fibroblastic proliferation (t=15.979). The relative amount of VEGF mRNA was significantly lower for ADSC-fixed polypropylene compared with the other polypropylene meshes (t=94.6). In conclusion, polypropylene mesh scaffold with ADSCs exhibit excellent cellular compatibility and are promising in clinical practice.

Silane Modified Diopside for Improved Interfacial Adhesion and Bioactivity of Composite Scaffolds

Diopside (DIOP) was introduced into polyetheretherketone/polyglycolicacid (PEEK/PGA) scaffolds fabricated via selective laser sintering to improve bioactivity. The DIOP surface was then modified using a silane coupling agent, 3-glycidoxypropyltrimethoxysilane (KH570), to reinforce interfacial adhesion. The results showed that the tensile properties and thermal stability of the scaffolds were significantly enhanced. It could be explained that, on the one hand, the hydrophilic group of KH570 formed an organic covalent bond with the hydroxy group on DIOP surface. On the other hand, there existed relatively high compatibility between its hydrophobic group and the biopolymer matrix. Thus, the ameliorated interface interaction led to a homogeneous state of DIOP dispersion in the matrix. More importantly, an in vitro bioactivity study demonstrated that the scaffolds with KH570-modified DIOP (KDIOP) exhibited the capability of forming a layer of apatite. In addition, cell culture experiments revealed that they had good biocompatibility compared to the scaffolds without KDIOP. It indicated that the scaffolds with KDIOP possess potential application in tissue engineering.

A mini review focused on the proangiogenic role of silicate ions released from silicon-containing biomaterials

Angiogenesis is considered an important issue in the development of biomaterials for the successful regeneration of tissues including bone. While growth factors are commonly used with biomaterials to promote angiogenesis, some ions released from biomaterials can also contribute to angiogenic events. Many silica-based biomaterials have been widely used for the repair and regeneration of tissues, mainly hard tissues such as bone and tooth structure. They have shown excellent performance in bone formation by stimulating angiogenesis. The release of silicate and others (Co and Cu ions) has therefore been implicated to play critical roles in the angiogenesis process. In this short review, we highlight the in vitro and in vivo findings of angiogenesis (and the related bone formation) stimulated by the various types of silicon-containing biomaterials where silicate ions released might play essential roles. We discuss further the possible molecular mechanisms underlying in the ion-induced angiogenic events.

Promoting angiogenesis with mesoporous microcarriers through a synergistic action of delivered silicon ion and VEGF

Angiogenic capacity of biomaterials is a key asset to drive vascular ingrowth during tissue repair and regeneration. Here we design a unique angiogenic microcarrier based on sol-gel derived mesoporous silica. The microspheres offer a potential angiogenic stimulator, Si ion, 'intrinsically' within the chemical structure. Furthermore, the highly mesoporous nature allows the loading and release of angiogenic growth factor 'extrinsically'. The Si ion is released from the microcarriers at therapeutic ranges (over a few ppm per day), which indeed up-regulates the expression of hypoxia inducing factor 1α (HIF1α) and stabilizes it by blocking HIF-prolyl hydroxylase 2 (PHD2) in HUVECs. This in turn activates the expression of a series of proangiogenic molecules, including bFGF, VEGF, and eNOS. VEGF is incorporated effectively within the mesopores of microcarriers and is then released continuously over a couple of weeks. The Si ion and VEGF released from the microcarriers synergistically stimulate endothelial cell functions, such as cell migration, chemotactic homing, and tubular networking. Furthermore, in vivo neo-blood vessel sprouting in chicken chorioallantoic membrane model is significantly promoted by the Si/VEGF releasing microcarriers. The current study demonstrates the synergized effects of Si ion and angiogenic growth factor through a biocompatible mesoporous microsphere delivery platform, and the concept provided here may open the door to a new co-delivery system of utilizing ions with growth factors for tissue repair and regeneration.

Characterization and Bioactivity Evaluation of (Polyetheretherketone/Polyglycolicacid)-Hydroyapatite Scaffolds for Tissue Regeneration

Bioactivity and biocompatibility are crucial for tissue engineering scaffolds. In this study, hydroxyapatite (HAP) was incorporated into polyetheretherketone/polyglycolicacid (PEEK/PGA) hybrid to improve its biological properties, and the composite scaffolds were developed via selective laser sintering (SLS). The effects of HAP on physical and chemical properties of the composite scaffolds were investigated. The results demonstrated that HAP particles were distributed evenly in PEEK/PGA matrix when its content was no more than 10 wt %. Furthermore, the apatite-forming ability became better with increasing HAP content after immersing in simulated body fluid (SBF). Meanwhile, the composite scaffolds presented a greater degree of cell attachment and proliferation than PEEK/PGA scaffolds. These results highlighted the potential of (PEEK/PGA)-HAP scaffolds for tissue regeneration.

Synthesis, characterization, and in vitro cytocompatibility of Ga-bioactive glass/polymer hydrogel composites

A bioactive glass series (0.42SiO₂-0.10Na₂O-0.08CaO-(0.40-x)ZnO-(x)Ga₂O₃) was incorporated in carboxymethyl cellulose-dextran hydrogels at three different loadings (0.05, 0.10, and 0.25 m²), and the resulting composites were characterized using scanning electron microscopy, physical swelling characteristics, and inductively coupled plasma optical emission spectroscopy. In vitro cytocompatibility was also evaluated for composite extracts in contact with L-929 mouse fibroblasts and MC3T3-E1 human osteoblasts. Scanning electron microscopy confirmed that glass particles were distributed throughout the hydrogels, and swelling studies showed that glass presence can increase the amount of fluid that can be absorbed by the hydrogels after seven days of immersion in phosphate-buffered saline by up to 180%. Several trends were observed in the inductively coupled plasma optical emission spectroscopy data, with the most important being the release of Ga³⁺ from both Ga-containing glasses at all three loadings, with a maximum of 4.7 mg/L released after 30 days of incubation in phosphate-buffered saline. Cell viability analysis suggested that most composite extracts did not decrease neither fibroblast nor osteoblast viability. These results indicate that it is possible to embed bioactive glass particles into carboxymethyl cellulose-dextran hydrogels, and upon submersion in aqueous media, release ions from the glass particles that may elicit therapeutic effects.

Antibacterial and antifungal potential of Ga-bioactive glass and Ga-bioactive glass/polymeric hydrogel composites

A bioactive glass series (0.42SiO₂ -0.10Na₂ O-0.08CaO-(0.40 - x)ZnO-(x)Ga₂ O₃ ) was synthesized, and it is efficacy against the Gram (-ve) bacteria Escherichia coli (E. coli), the Gram (+ve) bacteria Staphylococcus aureus (S. aureus), and the fungus Candida albicans (C. albicans), were characterized through liquid broth analysis. The glass series was also seeded in CMC-Dex hydrogels at three different loadings (0.05, 0.10, and 0.25 m² ), and the antibacterial and antifungal efficacies of the resulting composites were characterized using both liquid broth and agar diffusion analysis. Liquid broth analysis was conducted using liquid extracts, which for glass samples were obtained after incubation for up to 30 days in both ultrapure water and phosphate buffered saline (PBS), while glass-hydrogel extracts were obtained solely in PBS. Glass extracts (water) decreased C. albicans viability, while those obtained in PBS decreased the viability of both E. coli and C. albicans. Glass-hydrogel extracts exhibited slight inhibition of E. coli and C. albicans. However, none of the liquid extracts decreased S. aureus viability. Glass-hydrogel composites produced inhibition zones in all three microbial cultures, with the greatest efficacy against C. albicans. The results of this study suggest these materials have potential as bone void-filling materials which display antifungal, and possibly, antibacterial properties. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 1102-1113, 2017.

Biological behavior of bioactive glasses and their composites

This review summarizes current developments in improving the biological behavior of bioactive glasse and their composites.

Bioactive glasses beyond bone and teeth: emerging applications in contact with soft tissues

The applications of bioactive glasses (BGs) have to a great extent been related to the replacement, regeneration and repair of hard tissues, such as bone and teeth, and there is an extensive bibliography documenting the role of BGs as bone replacement materials and in bone tissue engineering applications. Interestingly, many of the biochemical reactions arising from the contact of BGs with bodily fluids, in particular the local increase in concentration of various ions at the glass-tissue interface, are also relevant to mechanisms involved in soft tissue regeneration. An increasing number of studies report on the application of BGs in contact with soft tissues, aiming at exploiting the well-known bioactive properties of BGs in soft tissue regeneration and wound healing. This review focuses on research, sometimes involving preliminary in vitro studies but also in vivo evidence, that demonstrates the suitability of BGs in contact with tissues outside the skeletal system, which includes studies investigating vascularization, wound healing and cardiac, lung, nerve, gastrointestinal, urinary tract and laryngeal tissue repair using BGs in various forms of particulates, fibers and nanoparticles with and without polymer components. Potentially active mechanisms of interaction of BGs and soft tissues based on the surface bioreactivity of BGs and on biomechanical stimuli affecting the soft tissue-BG collagenous bonding are discussed based on results in the literature.

Angiogenic effects of ionic dissolution products released from a boron-doped 45S5 bioactive glass

In regenerative medicine of vascularized tissues, there is a great interest in the use of biomaterials that are able to stimulate angiogenesis, a process necessary for rapid revascularization to allow the transport and exchange of oxygen, nutrients, growth factors and cells that take part in tissue repair and/or regeneration. An increasing number of publications have shown that bioactive glasses stimulate angiogenesis. Because it has been established that boron (B) may play a role in angiogenesis, the aim of this study was to assess the in vivo angiogenic effects of the ionic dissolution products that from a bioactive glass (BG) in the 45S5 system doped with 2 wt% B₂O₃ (45S5.2B). The pro-angiogenic capacity of 45S5.2B BG was assessed on the vasculature of the embryonic quail chorioallantoic membrane (CAM). Ionic dissolution products from 45S5.2B BG increased angiogenesis. This is quantitatively evidenced by the greater expression of integrin α_vβ₃ and higher vascular density in the embryonic quail CAM. The response observed at 2 and 5 days post-treatment was equivalent to that achieved by applying 10 µg mL^-1 of basic fibroblast growth factor. These results show that the ionic dissolution products released from the bioactive glass 45S5.2B stimulate angiogenesis in vivo. The effects observed are attributed to the presence the ionic dissolution products, which contained 160 ± 10 µM borate.

Multifunctional mesoporous bioactive glasses for effective delivery of therapeutic ions and drug/growth factors

Regeneration of large-size bone defects represents a significant challenge clinically, which requires the use of scaffolds with multifunction, such as anti-bacterial activity, and stimulation of osteogenesis and angiogenesis. It is known that functional ions or drug/growth factors play an important role to stimulate tissue regeneration. Mesoporous bioactive glasses (MBG) possess excellent bioactivity and drug-delivery ability as well as effective ionic release in the body fluids microenvironment due to its specific mesoporous structure and large surface area. For these reasons, functional ions (e.g. lithium (Li), strontium (Sr), Copper (Cu) and Boron (B)) and drug/growth factors (e.g. dexamethasone, vascular endothelial growth factor (VEGF) and bone morphogenetic protein (BMP)) have been incorporated into MBG, which shows high loading efficiency and effective release. The release of therapeutic ions and drug/growth factors from MBG offers it multifunctional properties, such as improved osteogenesis, angiogenesis, anti-bacterial/cancer activity. However, there is no a systematic review about delivery of therapeutic ions and drugs/growth factors from MBG for the functional effect on the tissue regeneration despite that significant progress has been achieved in the past five years. Therefore, in this review, we mainly focused on the new advances for the functional effect of delivering therapeutic ions and drugs/growth factors on the ostegeogenesis, angiogenesis and antibacterial activity. It is expected that the review will offer new concept to develop multifunctional biomaterials for bone regeneration by the synergistic effect of therapeutic ions and drug/growth factors.

In vitro endothelial cell response to ionic dissolution products from boron-doped bioactive glass in the SiO2–CaO–P2O5–Na2O system

As it has been established that boron (B) may perform functions in angiogenesis and osteogenesis, the controlled and localized release of B ions from bioactive glasses (BGs) is expected to provide a promising therapeutic alternative for regenerative medicine of vascularized tissues, such as bone.