Brain tissue interaction with three-dimensional, honeycomb polycaprolactone-based scaffolds designed for cranial reconstruction following traumatic brain injury

Clinical Outcomes of 3D-Printed Bioresorbable Scaffolds for Bone Tissue Engineering-A Pilot Study on 126 Patients for Burrhole Covers in Subdural Hematoma

Burrhole craniostomy is commonly performed for subdural hematoma (SDH) evacuation, but residual scalp depressions are often cosmetically suboptimal for patients. OsteoplugTM, a bioresorbable polycaprolactone burrhole cover, was introduced by the National University Hospital, Singapore, in 2006 to cover these defects, allowing osseous integration and vascular ingrowth. However, the cosmetic and safety outcomes of OsteoplugTM-C-the latest (2017) iteration, with a chamfered hole for subdural drains-remain unexplored. Data were collected from a single institution from April 2017 to March 2021. Patient-reported aesthetic outcomes (Aesthetic Numeric Analog (ANA)) and quality of life (EQ-5D-3L including Visual Analog Scale (VAS)) were assessed via telephone interviews. Clinical outcomes included SDH recurrence, postoperative infections, and drain complications. OsteoplugTM-C patients had significantly higher satisfaction and quality of life compared to those without a burrhole cover (ANA: 9 [7, 9] vs. 7 [5, 8], p = 0.019; VAS: 85 [75, 90] vs. 70 [50, 80], p = 0.021), and the absence of a burrhole cover was associated with poorer aesthetic outcomes after multivariable adjustment (adjusted OR: 4.55, 95% CI: 1.09-22.68, p = 0.047). No significant differences in other clinical outcomes were observed between OsteoplugTM-C, OsteoplugTM, or no burrhole cover. Our pilot study supports OsteoplugTM-C and its material polycaprolactone as suitable adjuncts to burrhole craniostomy, improving cosmetic outcomes while achieving comparable safety outcomes.

Electroactive Smart Materials for Neural Tissue Regeneration

Repair in the human nervous system is a complex and intertwined process that offers significant challenges to its study and comprehension. Taking advantage of the progress in fields such as tissue engineering and regenerative medicine, the scientific community has witnessed a strong increase of biomaterial-based approaches for neural tissue regenerative therapies. Electroactive materials, increasingly being used as sensors and actuators, also find application in neurosciences due to their ability to deliver electrical signals to the cells and tissues. The use of electrical signals for repairing impaired neural tissue therefore presents an interesting and innovative approach to bridge the gap between fundamental research and clinical applications in the next few years. In this review, first a general overview of electroactive materials, their historical origin, and characteristics are presented. Then a comprehensive view of the applications of electroactive smart materials for neural tissue regeneration is presented, with particular focus on the context of spinal cord injury and brain repair. Finally, the major challenges of the field are discussed and the main challenges for the near future presented. Overall, it is concluded that electroactive smart materials play an ever-increasing role in neural tissue regeneration, appearing as potentially valuable biomaterials for regenerative purposes.

Bioactivity and Bone Cell Formation with Poly-ε-Caprolactone/Bioceramic 3D Porous Scaffolds

This study applied poly-ε-caprolactone (PCL), a biomedical ceramic powder as an additive (nano-hydroxyapatite (nHA) or β-tricalcium diphosphate (β-TCP)), and sodium chloride (NaCl) and ammonium bicarbonate ((NH4)HCO3) as porogens; these stuffs were used as scaffold materials. An improved solvent-casting/particulate-leaching method was utilized to fabricate 3D porous scaffolds. In this study we examined the physical properties (elastic modulus, porosity, and contact angle) and degradation properties (weight loss and pH value) of the 3D porous scaffolds. Both nHA and β-TCP improved the mechanical properties (elastic modulus) of the 3D porous scaffolds. The elastic modulus (0.15~1.865 GPa) of the various composite scaffolds matched that of human cancellous bone (0.1~4.5 GPa). Osteoblast-like (MG63) cells were cultured, a microculture tetrazolium test (MTT) was conducted and alkaline phosphatase (ALP) activity of the 3D porous scaffolds was determined. Experimental results indicated that both nHA and β-TCP powder improved the hydrophilic properties of the scaffolds. The degradation rate of the scaffolds was accelerated by adding nHA or β-TCP. The MTT and ALP activity tests indicated that the scaffolds with a high ratio of nHA or β-TCP had excellent properties of in vitro biocompatibility (cell attachment and proliferation).

Combined bioscaffold with stem cells and exosomes can improve traumatic brain injury

The intricacy of the brain, along with the existence of blood brain barrier (BBB) does complicate the delivery of effective therapeutics through simple intravascular injection. Hence, an effective delivery mechanism of therapeutics in the event of either traumatic brain injury (TBI) or other brain injuries is needed. Stem cells can promote regeneration and repair injury. The usage of biomaterials and exosomes in transporting stem cells to target lesion sites has been suggested as a potential option. The combination of biomaterials with modified exosomes can help in transporting stem cells to injury sites, whiles also increasing their survival and promoting effective treatment. Herein, we review the current researches pertinent to biological scaffolds and exosomes in repairing TBI and present the current progress and new direction in the clinical setting. We begin with the role of bioscaffold in treating neuronal conditions, the effect of exosomes in injury, and conclude with the improvement of TBI via the employment of combined exosomes, bioscaffold and stem cells.

Next generation human brain models: engineered flat brain organoids featuring gyrification

Brain organoids are considered to be a highly promising in vitro model for the study of the human brain and, despite their various shortcomings, have already been used widely in neurobiological studies. Especially for drug screening applications, a highly reproducible protocol with simple tissue culture steps and consistent output, is required. Here we present an engineering approach that addresses several existing shortcomings of brain organoids. By culturing brain organoids with a polycaprolactone scaffold, we were able to modify their shape into a flat morphology. Engineered flat brain organoids (efBOs) possess advantageous diffusion conditions and thus their tissue is better supplied with oxygen and nutrients, preventing the formation of a necrotic tissue core. Moreover, the efBO protocol is highly simplified and allows to customize the organoid size directly from the start. By seeding cells onto 12 by 12 mm scaffolds, the brain organoid size can be significantly increased. In addition, we were able to observe folding reminiscent of gyrification around day 20, which was self-generated by the tissue. To our knowledge, this is the first study that reports intrinsically caused gyrification of neuronal tissue in vitro. We consider our efBO protocol as a next step towards the generation of a stable and reliable human brain model for drug screening applications and spatial patterning experiments.

Thiolated bone and tendon tissue particles covalently bound in hydrogels for in vivo calvarial bone regeneration

Bone regeneration of large cranial defects, potentially including traumatic brain injury (TBI) treatment, presents a major problem with non-crosslinking, clinically available products due to material migration outside the defect. Commercial products such as bone cements are permanent and thus not conducive to bone regeneration, and typical commercial bioactive materials for bone regeneration do not crosslink. Our previous work demonstrated that non-crosslinking materials may be prone to material migration following surgical placement, and the current study attempted to address these problems by introducing a new hydrogel system where tissue particles are themselves the crosslinker. Specifically, a pentenoate-modified hyaluronic acid (PHA) polymer was covalently linked to thiolated tissue particles of demineralized bone matrix (TDBM) or devitalized tendon (TDVT), thereby forming an interconnected hydrogel matrix for calvarial bone regeneration. All hydrogel precursor solutions exhibited sufficient yield stress for surgical placement and an adequate compressive modulus post-crosslinking. Critical-size calvarial defects were filled with a 4% PHA hydrogel containing 10 or 20% TDBM or TDVT, with the clinical product DBX^Ⓡ being employed as the standard of care control for the in vivo study. At 12 weeks, micro-computed tomography analysis demonstrated similar bone regeneration among the experimental groups, TDBM and TDVT, and the standard of care control DBX^Ⓡ. The group with 10% TDBM was therefore identified as an attractive material for potential calvarial defect repair, as it additionally exhibited a sufficient initial recovery after shearing (i.e., > 80% recovery). Future studies will focus on applying a hydrogel in a rat model for treatment of TBI. STATEMENT OF SIGNIFICANCE: Non-crosslinking materials may be prone to material migration from a calvarial bone defect following surgical placement, which is problematic for materials intended for bone regeneration. Unfortunately, typical crosslinking materials such as bone cements are permanent and thus not conducive to bone regeneration, and typical bioactive materials for bone regeneration such as tissue matrix are not crosslinked in commercial products. The current study addressed these problems by introducing a new biomaterial where tissue particles are themselves the crosslinker in a hydrogel system. The current study successfully demonstrated a new material based on pentenoate-modified hyaluronic acid with thiolated demineralized bone matrix that is capable of rapid crosslinking, with desirable paste-like rheology of the precursor material for surgical placement, and with bone regeneration comparable to a commercially available standard-of-care product. Such a material may hold promise for a single-surgery treatment of severe traumatic brain injury (TBI) following hemicraniectomy.

Superior calvarial bone regeneration using pentenoate-functionalized hyaluronic acid hydrogels with devitalized tendon particles

Traumatic brain injury (TBI) is a life-threatening condition defined by internal brain herniation. Severe TBI is commonly treated by a two-stage surgical intervention, where decompressive craniectomy is first conducted to remove a large portion of calvarial bone and allow unimpeded brain swelling. In the second surgery, spaced weeks to months after the first, cranioplasty is performed to restore the cranial bone. Hydrogels with paste-like precursor solutions for surgical placement may potentially revolutionize TBI treatment by permitting a single-stage surgical intervention, capable of being implanted with the initial surgery, remaining pliable during brain swelling, and tuned to regenerate calvarial bone after brain swelling has subsided. The current study evaluated the use of photocrosslinkable pentenoate-functionalized hyaluronic acid (PHA) and non-crosslinking hyaluronic acid (HA) hydrogels encapsulating naturally derived tissue particles of demineralized bone matrix (DBM), devitalized cartilage (DVC), devitalized meniscus (DVM), or devitalized tendon (DVT) for bone regeneration in critical-size rat calvarial defects. All hydrogel precursors exhibited a yield stress for placement and addition of particles increased the average material compressive modulus. The HA-DBM (4-30%), PHA (4%), and PHA-DVT (4-30%) groups had 5 (p < 0.0001), 3.1, and 3.2 (p < 0.05) times greater regenerated bone volume compared to the sham (untreated defect) group, respectively. In vitro cell studies suggested that the PHA-DVT (4-10%) group would have the most desirable performance. Overall, hydrogels containing DVT particles outperformed other materials in terms of bone regeneration in vivo and calcium deposition in vitro. Hydrogels containing DVT will be further evaluated in future rat TBI studies.

STATEMENT OF SIGNIFICANCE

Traumatic brain injury (TBI) is a life-threatening condition characterized by severe brain swelling and is currently treated by a two-stage surgical procedure. Complications associated with the two-stage surgical intervention include the occurrence of the condition termed syndrome of the trephined; however, the condition is completely reversible once the secondary surgery is performed. A desirable TBI treatment would include a single surgical intervention to avoid syndrome of the trephined altogether. The first hurdle in reaching the overall goal is to develop a pliable hydrogel material that can regenerate the patient's bone. The development of a pliable hydrogel technology would greatly impact the field of bone regeneration for TBI application and other areas of bone regeneration.

Effects of tissue processing on bioactivity of cartilage matrix-based hydrogels encapsulating osteoconductive particles

In the treatment of severe traumatic brain injury (TBI), decompressive craniectomy is commonly used to remove a large portion of calvarial bone to allow unimpeded brain swelling. Hydrogels have the potential to revolutionize TBI treatment by permitting a single-surgical intervention, remaining pliable during brain swelling, and tuned to regenerate bone after swelling has subsided. With this motivation, our goal is to present a pliable material capable of regenerating calvarial bone across a critical size defect. We therefore proposed the use of a methacrylated solubilized decellularized cartilage (MeSDCC) hydrogel encapsulating synthetic osteogenic particles of hydroxyapatite nanofibers, bioglass microparticles, or added rat bone marrow-derived mesenchymal stem cells (rMSCs) for bone regeneration in critical-size rat calvarial defects. Fibrin hydrogels were employed as a control material for the study. MeSDCC hydrogels exhibited sufficient rheological performance for material placement before crosslinking ([Formula: see text] > 500 Pa), and sufficient compressive moduli post-crosslinking (E > 150 kPa). In vitro experiments suggested increased calcium deposition for cells seeded on the MeSDCC material; however, in vivo bone regeneration was minimal in both MeSDCC and fibrin groups, even with colloidal materials or added rMSCs. Minimal bone regeneration in the MeSDCC test groups may potentially be attributed to cartilage solubilization after decellularization, in which material signals may have degraded from enzymatic treatment. Looking to the future, an improvement in the bioactivity of the material will be crucial to the success of bone regeneration strategies for TBI treatment.

In vivo analysis of covering materials composed of biodegradable polymers enriched with flax fibers

BACKGROUND

The objective of this study was to investigate the in vivo effect of bioactive composites with poly(lactic acid) (PLA) or polycaprolactone (PCL) as the matrix, reinforced with bioplastic flax fibers, on the surrounding muscle tissue.

METHODS

Materials of pure PLA and PCL and their composites with flax fibers from genetically modified plants producing poly-3-hydroxybutyrate (PLA-transgen, PCL-transgen) and unmodified plants (PLA-wt, PCL-wt) were placed subcutaneous on the M. latissimus dorsi for four weeks.

RESULTS

The analysis of histological samples revealed that every tested material was differently encapsulated and the capsule thickness is much more pronounced when using the PCL composites in comparison with the PLA composites. The encapsulation by connective tissue was significantly reduced around PCL-transgen and significantly increased in the cases of PLA-transgen and PLA-wt. In the collected muscle samples, the measured protein expression of CD45, lymphocyte common antigen, was significantly increased after the use of all tested materials, with the exception of pure PCL. In contrast, the protein expression of caveolin-1 remained unchanged after treatment with the most examined materials. Only after insertion of PLA-wt, a significant increase of caveolin-1 protein expression was detected, due to the improved neovascularization.

CONCLUSION

These data support the presumption that the new bioactive composites are biocompatible and they could be applicable in the medical field to support the regenerative processes.

Bone Regeneration after Treatment with Covering Materials Composed of Flax Fibers and Biodegradable Plastics: A Histological Study in Rats

The aim of this study was to examine the osteogenic potential of new flax covering materials. Bone defects were created on the skull of forty rats. Materials of pure PLA and PCL and their composites with flax fibers, genetically modified producing PHB (PLA-transgen, PCL-transgen) and unmodified (PLA-wt, PCL-wt), were inserted. The skulls were harvested after four weeks and subjected to histological examination. The percentage of bone regeneration by using PLA was less pronounced than after usage of pure PCL in comparison with controls. After treatment with PCL-transgen, a large amount of new formed bone could be found. In contrast, PCL-wt decreased significantly the bone regeneration, compared to the other tested groups. The bone covers made of pure PLA had substantially less influence on bone regeneration and the bone healing proceeded with a lot of connective tissue, whereas PLA-transgen and PLA-wt showed nearly comparable amount of new formed bone. Regarding the histological data, the hypothesis could be proposed that PCL and its composites have contributed to a higher quantity of the regenerated bone, compared to PLA. The histological studies showed comparable bone regeneration processes after treatment with tested covering materials, as well as in the untreated bone lesions.

Influence of internal pore architecture on biological and mechanical properties of three-dimensional fiber deposited scaffolds for bone regeneration

Fused deposition modeling has been used to fabricate three-dimensional (3D) scaffolds for tissue engineering applications, because it allows to tailor their pore network. Despite the proven flexibility in doing so, a limited amount of studies have been performed to evaluate whether specific pore shapes have an influence on cell activity and tissue formation. Our study aimed at investigating the influence of internal pore architecture on the biological and mechanical properties of 3D scaffolds seeded with mesenchymal stromal cells. Polycaprolactone scaffolds with six different geometries were fabricated. The 3D samples were manufactured with different lay-down pattern of the fibers by varying the layer deposition angle from 0°/15°/30°, to 0°/30°/60°, 0°/45°/90°, 0°/60°/120°, 0°/75°/150°, and 0°/90°/180°. The scaffolds were investigated by scanning electron microscopy and micro computed tomographical analysis and displayed a fully interconnected pore network. Cell proliferation and differentiation toward the osteogenic lineage were evaluated by DNA, alkaline phosphatase activity, and polymerase chain reaction. The obtained scaffolds had structures with open porosity (50%-60%) and interconnected pores ranging from 380 to 400 µm. Changing the angle deposition affected significantly the mechanical properties of the scaffolds. With increasing the angle deposition between successive layers, the elastic modulus increased as well. Cellular studies also showed influence of the internal architecture on cell adhesion and proliferation within the 3D construct, yet limited influence on cell differentiation was observed.

Clinical applications of naturally derived biopolymer-based scaffolds for regenerative medicine

Naturally derived polymeric biomaterials, such as collagens, silks, elastins, alginates, and fibrins are utilized in tissue engineering due to their biocompatibility, bioactivity, and tunable mechanical and degradation kinetics. The use of these natural biopolymers in biomedical applications is advantageous because they do not release cytotoxic degradation products, are often processed using environmentally-friendly aqueous-based methods, and their degradation rates within biological systems can be manipulated by modifying the starting formulation or processing conditions. For these reasons, many recent in vivo investigations and FDA-approval of new biomaterials for clinical use have utilized natural biopolymers as matrices for cell delivery and as scaffolds for cell-free support of native tissues. This review highlights biopolymer-based scaffolds used in clinical applications for the regeneration and repair of native tissues, with a focus on bone, skeletal muscle, peripheral nerve, cardiac muscle, and cornea substitutes.

Effects of polycaprolactone-based scaffolds on the blood-brain barrier and cerebral inflammation

Severe pathoanatomical and mechanical injuries compromise patient recovery and survival following penetrating brain injury (PBI). The realization that the blood-brain barrier (BBB) plays a major role in dictating post-PBI events has led to rising interests in possible therapeutic interventions through the BBB. Recently, the choroid plexus has also been suggested as a potential therapeutic target. The use of biocompatible scaffolds for the delivery of therapeutic agents, but little is known about their interaction with cerebral tissue, which has important clinical implications. Therefore, the authors have sought to investigate the effect of polycaprolactone (PCL) and PCL/tricalcium phosphate (PCL/TCP) scaffolds on the maintenance of BBB phenotype posttraumatic brain injury. Cranial defects of 3 mm depth were created in Sprague Dawley rats, and PCL and PCL/TCP scaffolds were subsequently implanted in predetermined locations for a period of 1 week and 1 month. Higher endothelial barrier antigen (EBA) expressions from PCL-based scaffold groups (p>0.05) were found, suggesting slight advantages over the sham group (no scaffold implantation). PCL/TCP scaffold group also expressed EBA to a higher degree (p>0.05) than PCL scaffolds. Importantly, higher capillary count and area as early as 1 week postimplantation suggested lowered ischemia from the PCL/TCP scaffold group as compared with PCL and sham. Evaluation of interlukin-1β expression suggested that the PCL and PCL/TCP scaffolds did not cause prolonged inflammation. BBB transport selectivity was evaluated by the expression of aquaporin-4 (AQP-4). Attenuated expression of AQP-4 in the PCL/TCP group (p<0.05) suggested that PCL/TCP scaffolds altered BBB selectivity to a lower degree as compared with sham and PCL groups, pointing to potential clinical implications in reducing cerebral edema. Taken together, the responses of PCL-based scaffolds with brain tissue suggested safety, and encourages further preclinical evaluation in PBI management with these scaffolds.

Biomimetic honeycomb-patterned surface as the tunable cell adhesion scaffold

PS honeycomb structured surfaces were modified into both cell-philic and cell-phobic by dip-coating and casting polySBMA, respectively, which was inspired by two typically adhesive behaviours of fish skin and Parthenocissus tricuspidata.