Cell Cotransplantation Strategies for Vascularized Craniofacial Bone Tissue Engineering: A Systematic Review and Meta-Analysis of Preclinical In Vivo Studies

Multipotent Mesenchymal Stromal Cells from Porcine Bone Marrow, Implanted under the Kidney Capsule, form an Ectopic Focus Containing Bone, Hematopoietic Stromal Microenvironment, and Muscles

Multipotent mesenchymal stromal cells (MSCs) are an object of intense investigation due to their therapeutic potential. MSCs have been well studied in vitro, while their fate after implantation in vivo has been poorly analyzed. We studied the properties of MSCs from the bone marrow (BM-MSC) before and after implantation under the renal capsule using a mini pig model. Autologous BM-MSCs were implanted under the kidney capsule. After 2.5 months, ectopic foci containing bones, foci of ectopic hematopoiesis, bone marrow stromal cells and muscle cells formed. Small pieces of the implant were cultivated as a whole. The cells that migrated out from these implants were cultured, cloned, analyzed and were proven to meet the most of criteria for MSCs, therefore, they are designated as MSCs from the implant-IM-MSCs. The IM-MSC population demonstrated high proliferative potential, similar to BM-MSCs. IM-MSC clones did not respond to adipogenic differentiation inductors: 33% of clones did not differentiate, and 67% differentiated toward an osteogenic lineage. The BM-MSCs revealed functional heterogeneity after implantation under the renal capsule. The BM-MSC population consists of mesenchymal precursor cells of various degrees of differentiation, including stem cells. These newly discovered properties of mini pig BM-MSCs reveal new possibilities in terms of their manipulation.

Hybrid fabrication of photo-clickable vascular hydrogels with additive manufactured titanium implants for enhanced osseointegration and vascularized bone formation

Bone regeneration of critical-sized bone defects, bone fractures or joint replacements remains a significant unmet clinical challenge. Although there has been rapid advancement in both the fields of bone tissue engineering and additive manufacturing (AM), functional bone implants with rapid vascularization capacity to ensure osseointegration and long-term biological fixation in large bone defects remains limited in clinics. In this study, we developed an in vitro vascularized bone implant by combining cell-laden hydrogels with direct metal printed (DMP) porous titanium alloys (Ti-6Al-4V). 5wt% allylated gelatin (GelAGE), was utilized to co-encapsulate human mesenchymal stromal cells (hMSCs) and human umbilical vein endothelial cells (HUVECs) to investigate concurrent osteogenic and vasculogenic performance. DMP macro-porous Ti-6Al-4V scaffolds were subsequently infused/enriched with cell-laden GelAGE to examine the feasibility to deliver cells and engineer vascular-like networks in the hybrid implant. Furthermore, as a proof of concept, a full-scale porous Ti-6Al-4V acetabular cup was impregnated with cell-laden hydrogel to validate the clinical potential of this strategy. The vasculogenic potential was evaluated by examining micro-capillary formation coupled with capillary network maturation and stabilization. Osteogenic differentiation was assessed via ALP activity as well as osteocalcin and osteopontin expression. Our results suggested that GelAGE supported HUVECs spreading and vascular-like network formation, along with osteogenesis of hMSCs. Titanium hybrid constructs with cell-laden hydrogel demonstrated enhanced osteogenesis with similar vasculogenic capability compared to the cell-laden hydrogel alone constructs. The full-scale implant with cell-laden hydrogel coating similarly showed cell distribution and spreading, implying the potential for further clinical application. Our study presents the feasibility of integrating bio-functional hydrogels with porous titanium implants to fabricate a vascularized hybrid construct with both mechanical support and preferable biological functionality (osteogenesis/vasculogenesis), which paves the way for improved strategies to enhance bone regeneration in complex large bone defects achieving long-term bone-implant fixation.

The osteogenesis of Ginsenoside Rb1 incorporated silk/micro-nano hydroxyapatite/sodium alginate composite scaffolds for calvarial defect

Ginsenoside Rb1, the effective constituent of ginseng, has been demonstrated to play favorable roles in improving the immunity system. However, there is little study on the osteogenesis and angiogenesis effect of Ginsenoside Rb1. Moreover, how to establish a delivery system of Ginsenoside Rb1 and its repairment ability in bone defect remains elusive. In this study, the role of Ginsenoside Rb1 in cell viability, proliferation, apoptosis, osteogenic genes expression, ALP activity of rat BMSCs were evaluated firstly. Then, micro-nano HAp granules combined with silk were prepared to establish a delivery system of Ginsenoside Rb1, and the osteogenic and angiogenic effect of Ginsenoside Rb1 loaded on micro-nano HAp/silk in rat calvarial defect models were assessed by sequential fluorescence labeling, and histology analysis, respectively. It revealed that Ginsenoside Rb1 could maintain cell viability, significantly increased ALP activity, osteogenic and angiogenic genes expression. Meanwhile, micro-nano HAp granules combined with silk were fabricated smoothly and were a delivery carrier for Ginsenoside Rb1. Significantly, Ginsenoside Rb1 loaded on micro-nano HAp/silk could facilitate osteogenesis and angiogenesis. All the outcomes hint that Ginsenoside Rb1 could reinforce the osteogenesis differentiation and angiogenesis factor’s expression of BMSCs. Moreover, micro-nano HAp combined with silk could act as a carrier for Ginsenoside Rb1 to repair bone defect.

A Narrative Review of Cell-Based Approaches for Cranial Bone Regeneration

Current cranial repair techniques combine the use of autologous bone grafts and biomaterials. In addition to their association with harvesting morbidity, autografts are often limited by insufficient quantity of bone stock. Biomaterials lead to better outcomes, but their effectiveness is often compromised by the unpredictable lack of integration and structural failure. Bone tissue engineering offers the promising alternative of generating constructs composed of instructive biomaterials including cells or cell-secreted products, which could enhance the outcome of reconstructive treatments. This review focuses on cell-based approaches with potential to regenerate calvarial bone defects, including human studies and preclinical research. Further, we discuss strategies to deliver extracellular matrix, conditioned media and extracellular vesicles derived from cell cultures. Recent advances in 3D printing and bioprinting techniques that appear to be promising for cranial reconstruction are also discussed. Finally, we review cell-based gene therapy approaches, covering both unregulated and regulated gene switches that can create spatiotemporal patterns of transgenic therapeutic molecules. In summary, this review provides an overview of the current developments in cell-based strategies with potential to enhance the surgical armamentarium for regenerating cranial vault defects.

Skeletal regeneration for segmental bone loss: Vascularised grafts, analogues and surrogates

Massive segmental bone defects (SBD) are mostly treated by removing the fibula and transplanting it complete with blood supply. While revolutionary 50 years ago, this remains the standard treatment. This review considers different strategies to repair SBD and emerging potential replacements for this highly invasive procedure. Prior to the technical breakthrough of microsurgery, researchers in the 1960s and 1970s had begun to make considerable progress in developing non autologous routes to repairing SBD. While the breaktthrough of vascularised bone transplantation solved the immediate problem of a lack of reliable repair strategies, much of their prior work is still relevant today. We challenge the assumption that mimicry is necessary or likely to be successful and instead point to the utility of quite crude (from a materials technology perspective), approaches. Together there are quite compelling indications that the body can regenerate entire bone segments with few or no exogenous factors. This is important, as there is a limit to how expensive a bone repair can be and still be widely available to all patients since cost restraints within healthcare systems are not likely to diminish in the near future. STATEMENT OF SIGNIFICANCE: This review is significant because it is a multidisciplinary view of several surgeons and scientists as to what is driving improvement in segmental bone defect repair, why many approaches to date have not succeeded and why some quite basic approaches can be as effective as they are. While there are many reviews of the literature of grafting and bone repair the relative lack of substantial improvement and slow rate of progress in clinical translation is often overlooked and we seek to challenge the reader to consider the issue more broadly.

Interdisciplinary management of skull base surgery

Skull base surgery remains one of the challenging areas in the field of cranio-maxillofacial surgery, otolaryngology and neurosurgery. Subsequent reconstruction of bone and soft tissue are an essential component to restore function and appearance after ablative surgery. Establishment of interdisciplinary tumor boards with presentation of the individual patient cases have become standard. Multiplanar reconstruction using MRI or CT imaging techniques combined with virtual 3D planning allow precise planning of the procedures. Intraoperative navigation helps for complete resection of malignant findings with safety margins; surgical approaches provide a good overview of the surgical site. Reconstruction using local flaps have a low complication rate with equally reliable results in reconstruction of small tissue defects. Free flap surgery makes reconstruction of large tissue defects possible. Alloplastic materials are alternatively used for reconstruction of bone defects. Based on selected patients, treatment algorithms and standard surgical procedures in extracerebral skull base surgery will be illustrated. Current techniques and new approaches will be discussed with emphasize on hard and soft tissue reconstruction.

Spheroid Coculture of Human Gingiva-Derived Progenitor Cells With Endothelial Cells in Modified Platelet Lysate Hydrogels

Cell coculture strategies can promote angiogenesis within tissue engineering constructs. This study aimed to test the angiogenic potential of human umbilical vein endothelial cells (HUVEC) cocultured with gingiva-derived progenitor cells (GPC) as spheroids in a xeno-free environment. Human platelet lysate (HPL) was used as a cell culture supplement and as a hydrogel matrix (HPLG) for spheroid encapsulation. HUVEC and HUVEC + GPC (1:1 or 5:1) spheroids were encapsulated in various HPLG formulations. Angiogenesis was assessed via in vitro sprouting and in vivo chick chorioallantoic membrane (CAM) assays. HUVEC revealed characteristic in vitro sprouting in HPL/HPLG and this was significantly enhanced in cocultures with GPC (p < 0.05). A trend for greater sprouting was observed in 5:1 vs 1:1 HUVEC + GPC spheroids and in certain HPLG formulations (p > 0.05). Both HUVEC and HUVEC + GPC spheroids in HPLG revealed abundant and comparable neoangiogenesis in the CAM assay (p > 0.05). Spheroid coculture of HUVEC + GPC in HPLG represents a promising strategy to promote angiogenesis.

Coupling Osteogenesis and Vasculogenesis in Engineered Orthopedic Tissues

Inadequate vascularization of engineered tissue constructs is a main challenge in developing a clinically impactful therapy for large, complex, and recalcitrant bone defects. It is well established that bone and blood vessels form concomitantly during development, as well as during repair after injury. Endothelial cells (ECs) and mesenchymal stromal cells (MSCs) are known to be key players in orthopedic tissue regeneration and vascularization, and these cell types have been used widely in tissue engineering strategies to create vascularized bone. Coculture studies have demonstrated that there is crosstalk between ECs and MSCs that can lead to synergistic effects on tissue regeneration. At the same time, the complexity in fabricating, culturing, and characterizing engineered tissue constructs containing multiple cell types presents a challenge in creating multifunctional tissues. In particular, the timing, spatial distribution, and cell phenotypes that are most conducive to promoting concurrent bone and vessel formation are not well understood. This review describes the processes of bone and vascular development, and how these have been harnessed in tissue engineering strategies to create vascularized bone. There is an emphasis on interactions between ECs and MSCs, and the culture systems that can be used to understand and control these interactions within a single engineered construct. Developmental engineering strategies to mimic endochondral ossification are discussed as a means of generating vascularized orthopedic tissues. The field of tissue engineering has made impressive progress in creating tissue replacements. However, the development of larger, more complex, and multifunctional engineered orthopedic tissues will require a better understanding of how osteogenesis and vasculogenesis are coupled in tissue regeneration. Impact statement Vascularization of large engineered tissue volumes remains a challenge in developing new and more biologically functional bone grafts. A better understanding of how blood vessels develop during bone formation and regeneration is needed. This knowledge can then be applied to develop new strategies for promoting both osteogenesis and vasculogenesis during the creation of engineered orthopedic tissues. This article summarizes the processes of bone and blood vessel development, with a focus on how endothelial cells and mesenchymal stromal cells interact to form vascularized bone both during development and growth, as well as tissue healing. It is meant as a resource for tissue engineers who are interested in creating vascularized tissue, and in particular to those developing cell-based therapies for large, complex, and recalcitrant bone defects.

Irregular Bone Defect Repair Using Tissue-Engineered Periosteum in a Rabbit Model

Background:

In previous studies, we succeeded in repairing a long bone defect with tissue-engineered periosteum (TEP), fabricated by incorporating rabbit mesenchymal stem cells with small intestinal submucosa. In this study, we investigated the feasibility of allogeneic irregular bone defect repair using TEP.

Methods:

We performed a subtotal resection of the scapula in 36 rabbits to establish a large irregular bone defect model. The rabbits were then randomly divided into three groups (n = 12 per group) and the defects were treated with TEP (Group 1), allogeneic deproteinized bone (DPB) (Group 2) or a hybrid of TEP and DPB (Group 3). At 4, 8, and 12 weeks after surgery, the rabbits were sacrificed, and the implants were harvested. X-ray radiographic and histological examinations were performed to detect bone healing. Ink-formaldehyde perfusion was introduced to qualitatively analyze vascularization in TEP engineered new bone.

Results:

The repair of scapular defects was diverse in all groups, shown by radiographic and histological tests. The radiographic scores in Group 1 and Group 3 were significantly higher than Group 2 at 8 and 12 weeks (p < 0.05). Histological scores further proved that Group 1 had significantly greater new bone formation compared to Group 3 (p < 0.05), while Group 2 had the lowest osteogenesis at all time-points (p < 0.001). Ink-formaldehyde perfusion revealed aboundant microvessels in TEP engineered new bone.

Conclusion:

We conclude that TEP is promising for the repair of large irregular bone defects. As a 3D scaffold, DPB could provide mechanical support and a shaping guide when combined with TEP. TEP engineered new bone has aboundant microvessels.

Cellular Based Strategies for Microvascular Engineering

Vascularization is a major hurdle in complex tissue and organ engineering. Tissues greater than 200 μm in diameter cannot rely on simple diffusion to obtain nutrients and remove waste. Therefore, an integrated vascular network is required for clinical translation of engineered tissues. Microvessels have been described as <150 μm in diameter, but clinically they are defined as <1 mm. With new advances in super microsurgery, vessels less than 1 mm can be anastomosed to the recipient circulation. However, this technical advancement still relies on the creation of a stable engineered microcirculation that is amenable to surgical manipulation and is readily perfusable. Microvascular engineering lays on the crossroads of microfabrication, microfluidics, and tissue engineering strategies that utilize various cellular constituents. Early research focused on vascularization by co-culture and cellular interactions, with the addition of angiogenic growth factors to promote vascular growth. Since then, multiple strategies have been utilized taking advantage of innovations in additive manufacturing, biomaterials, and cell biology. However, the anatomy and dynamics of native blood vessels has not been consistently replicated. Inconsistent results can be partially attributed to cell sourcing which remains an enigma for microvascular engineering. Variations of endothelial cells, endothelial progenitor cells, and stem cells have all been used for microvascular network fabrication along with various mural cells. As each source offers advantages and disadvantages, there continues to be a lack of consensus. Furthermore, discord may be attributed to incomplete understanding about cell isolation and characterization without considering the microvascular architecture of the desired tissue/organ.

Xenogeneic mesenchymal stem cell transplantation for mandibular defect regeneration

BACKGROUND

It is commonly accepted that xenogeneic stem cell transplantation for tissue engineering is faced with host immune rejection. Using a rat critical-size mandibular defect model, this study examined whether the immune rejection can be evaded by diminishing T-cell immunity.

METHODS

To examine donor cell survival and host immune reaction, pig bone marrow-derived mesenchymal stem cells (BM-MSCs) were labeled with CM-DiI, loaded onto gelatin sponge (5 × 10⁶ cells/scaffold), and transplanted into 5-mm mandibular defects of immunocompetent and T cell-deficient athymic rats. To examine the effects of xenogeneic BM-MSCs on bone regeneration, athymic rats undergone the same surgeries were terminated at post-operative weeks 1, 3, and 6. Control rats underwent the same jaw surgery without BM-MSC transplantation.

RESULTS

The density of CM-DiI-labeled BM-MSCs decreased with time in both strains of rats. Although it was substantially higher in athymic rats than in immunocompetent rats at post-operative day 1, by day 3-7 the density became comparable between the two strains of rats. Apoptosis reflected by cleaved Caspase-3 staining was low in both strains. Stronger infiltration of neutrophils, macrophages, B cells and CD8⁺ T cells was found in MSC-treated animals. In athymic rats, infiltration of neutrophils and macrophages was strong, but it occurred later than that in immunocompetent rats. While bone volume fraction significantly increased with time (P < .001), no difference was found between MSC-treated and control groups.

CONCLUSIONS

Even in hosts with deficient T-cell immunity, xenogeneic BM-MSC transplantation into mandibular critical-sized defects still faces challenges from host innate immunity, which compromises their regenerative efficacy.

Cotransplantation of mesenchymal stromal cells and endothelial cells on calcium carbonate and hydroxylapatite scaffolds in vivo

This study investigated the cotransplantation of bone marrow mesenchymal stromal cells (BMSC) and human umbilical cord endothelial cells (HUVEC), and evaluated their contribution to vascular and bone tissue engineering in vivo. To evaluate the success of osteogenic differentiation and timely vascularization of different osteoconductive scaffolds in vivo, we transferred BMSC and HUVEC pre-cultivated calcium carbonate (CaCO₃) and hydroxylapatite (HA) matrices into immunocompromised RNU-rats, and analyzed mineralization, expression of osteopontin, and vascular integration via new vessel formation. After in vivo transplantation, pre-cultivated scaffolds demonstrated overall improved mineralization of 44% for CaCO₃ (p = 0.01, SD ± 14.3) and 34% for HA (p = 0.001, SD ± 17.8), as well as improved vascularization of 5.6 vessels/0.1 mm² on CaCO₃ (p < 0.0001, SD ± 2.0) and 5.3 vessels/0.1 mm² on HA (p < 0.0001, SD ± 2.4) compared with non-pre-cultivated controls. However, no significant differences between the implantation of BMSC-only, HUVEC-only, or BMSC + HUVEC cocultures could be observed. There is an increasing demand for improved bone regeneration in tissue engineering. Cotransplantation of mesenchymal stromal cells and endothelial cells often demonstrates synergistic improvements in vitro. However, the benefits or superiority of cotransplantation was not evident in vivo and so will require further investigation.

A novel method to improve the osteogenesis capacity of hUCMSCs with dual-directional pre-induction under screened co-culture conditions

OBJECTIVES

Mesenchymal stem cells (MSCs) based therapy for bone regeneration has been regarded as a promising method in the clinic. However, hBMSCs with invasive harvesting process and undesirable proliferation rate hinder the extensive usage. HUCMSCs of easier access and excellent performances provide an alternative for the fabrication of tissue-engineered bone construct. Evidence suggested the osteogenesis ability of hUCMSCs was weaker than that of hBMSCs. To address this issue, a co-culture strategy of osteogenically and angiogenically induced hUCMSCs has been proposed since thorough vascularization facilitates the blood-borne nutrition and oxygen to transport in the scaffold, synergistically expediting the process of ossification.

MATERIALS AND METHODS

Herein, we used osteogenic- and angiogenic-differentiated hUCMSCs for co-culture in screened culture medium to elevate the osteogenic capacity with in vitro studies and finally coupled with 3D TCP scaffold to repair rat's critical-sized calvarial bone defect. By dual-directional induction, hUCMSCs could differentiate into osteoblasts and endothelial cells, respectively. To optimize the co-culture condition, gradient ratios of dual-directional differentiated hUCMSCs co-cultured under different medium were studied to determine the appropriate condition.

RESULTS

It revealed that the osteogenic- and angiogenic-induced hUCMSCs mixed with the ratio of 3:1 co-cultured in the mixed medium of osteogenic induction medium to endothelial cell induction medium of 3:1 possessed more mineralization nodules. Similarly, ALP and osteogenesis/angiogenesis-related genes expressions were relatively higher. Further evidence of bone defect repair with 3D printed TCP of 3:1 group exhibited better restoration outcomes.

CONCLUSIONS

Our work demonstrated a favourable and convenient approach of dual-directional differentiated hUCMSCs co-culture to improve the osteogenesis, establishing a novel way to fabricate tissue-engineered bone graft with 3D TCP for large bone defect augmentation.

Osseous Remodeling Around Dental Implants

Adequate bone remodeling may be a primary parameter for long-term successful complication-free dental implant treatment. A 1.8-mm osseous thickness around dental implants is thought to be the minimum thickness for adequate vasculature for osteocyte nutrition and function. A dental implant does not provide progenitor cells or angiogenic or osteogenic factors. Thus, the surrounding bone may need to have a 1.8-mm thickness to accommodate the vasculature necessary for nutrients for appropriate remodeling. Additionally, the 1.8-mm dimension may provide for mechanical load resistance. There is no evidence to illustrate the physiologic need for the 1.8-mm dimension. This dimension requirement is based on clinical outcome observations. Basic science research for bone survival around dental implants is needed.

Preformed Vascular Networks Survive and Enhance Vascularization in Critical Sized Cranial Defects

Vascular networks provide nutrients, oxygen, and progenitor cells that are essential for bone function. It has been proposed that a preformed vascular network may enhance the performance of engineered bone. In this study vascular networks were generated from human umbilical vein endothelial cell and mesenchymal stem cell spheroids encapsulated in fibrin scaffolds, and the stability of preformed vascular networks and their effect on bone regeneration were assessed in an in vivo bone model. Under optimized culture conditions, extensive vessel-like networks formed throughout the scaffolds in vitro. After vascular network formation, the vascularized scaffolds were implanted in a critical sized calvarial defect in nude rats. Immunohistochemical staining for CD31 showed that the preformed vascular networks survived and anastomosed with host tissue within 1 week of implantation. The prevascularized scaffolds enhanced overall vascularization after 1 and 4 weeks. Early bone formation around the perimeter of the defect area was visible in X-ray images of samples after 4 weeks. Prevascularized scaffolds may be a promising strategy for engineering vascularized bone.

Increased differentiation and production of extracellular matrix components of primary human osteoblasts after cocultivation with endothelial cells: A quantitative proteomics approach

Coculturing of bone-forming and blood vessel-forming cells is a strategy aimed at increasing vascularity of implanted bone constructs in tissue-engineering applications. We previously described that the coculture of primary human osteoblasts (hOBs) and human umbilical vein endothelial cells (HUVECs) improves the differentiation of both cell types, leading to the formation of functional blood vessels and enhanced bone regeneration. The objective of this study was to further delineate the multifaceted interactions between both cell types. To investigate the proteome of hOBs after cocultivation with HUVECs we used stable isotope labeling by amino acids in cell culture, revealing 49 significantly upregulated, and 54 significantly downregulated proteins. Amongst the highest regulated proteins, we found the proteins important for osteoblast differentiation, cellular adhesion, and extracellular matrix function, notably: connective tissue growth factor, desmoplakin, galectin-3, and cyclin-dependent kinase 6. The findings were confirmed by enzyme-linked immunosorbent assays. We also investigated whether the mRNA transcripts correlate with the changes in protein levels by quantitative real-time reverse transcription polymerase chain reaction. In addition, the data was compared to our previous microarray analysis of hOB transcriptome. Taken together, this in-depth analysis delivers reliable data suggesting the importance of coculturing of hOBs and HUVECs in tissue engineering.

Scaffold-Based Temporomandibular Joint Tissue Regeneration in Experimental Animal Models: A Systematic Review

Reconstruction of degenerated temporomandibular joint (TMJ) structures remains a clinical challenge. Tissue engineering (TE) is a promising alternative to current treatment options, where the TMJ is either left without functional components, or replaced with autogenous, allogeneic, or synthetic grafts. The objective of this systematic review was to answer the focused question: in experimental animal models, does the implantation of biomaterial scaffolds loaded with cells and/or growth factors (GFs) enhance regeneration of the discal or osteochondral TMJ tissues, compared with scaffolds alone, without cells, or GFs? Following PRISMA (Preferred Reporting Items for Systematic reviews and Meta-Analysis) guidelines, electronic databases were searched for relevant controlled preclinical in vivo studies. Thirty studies reporting TMJ TE strategies in both small (rodents, rabbits; n = 25) and large animals (dogs, sheep, goats; n = 5) reporting histological and/or radiographic outcomes were included. Twelve studies reported ectopic (subcutaneous) implantation models in rodents, whereas 18 studies reported orthotopic, surgically induced defect models in large animals. On average, studies presented with an unclear-to-high risk of bias. In most studies, mesenchymal stem cells or chondrocytes were used in combination with either natural or synthetic polymer scaffolds, aiming for either TMJ disc or condyle regeneration. In summary, the overall preclinical evidence (ectopic [n = 6] and orthotopic TMJ models [n = 6]) indicate that addition of chondrogenic and/or osteogenic cells to biomaterial scaffolds enhances the potential for TMJ tissue regeneration. Standardization of animal models and quantitative outcome evaluations (biomechanical, biochemical, histomorphometric, and radiographic) in future studies, would allow more reliable comparisons and increase the validity of the results.

The Role of Skeletal Stem Cells in the Reconstruction of Bone Defects

Craniofacial surgery, since its inauguration, has been the culmination of collaborative efforts to solve complex congenital, dysplastic, oncological, and traumatic cranial bone defects. Now, 50 years on from the first craniofacial meeting, the collaborative efforts between surgeons, scientists, and bioengineers are further advancing craniofacial surgery with new discoveries in tissue regeneration. Recent advances in regenerative medicine and stem cell biology have transformed the authors' understanding of bone healing, the role of stem cells governing bone healing, and the effects of the niche environment and extracellular matrix on stem cell fate. This review aims at summarizing the advances within each of these fields.

* Calvarial Defects: Cell-Based Reconstructive Strategies in the Murine Model

Calvarial defects pose a continued clinical dilemma for reconstruction. Advancements within the fields of stem cell biology and tissue engineering have enabled researchers to develop reconstructive strategies using animal models. We review the utility of various animal models and focus on the mouse, which has aided investigators in understanding cranial development and calvarial bone healing. The murine model has also been used to study regenerative approaches to critical-sized calvarial defects, and we discuss the application of stem cells such as bone marrow-derived mesenchymal stromal cells, adipose-derived stromal cells, muscle-derived stem cells, and pluripotent stem cells to address deficient bone in this animal. Finally, we highlight strategies to manipulate stem cells using various growth factors and inhibitors and ultimately how these factors may prove crucial in future advancements within calvarial reconstruction using native skeletal stem cells.

A systematic review of the asymmetric inheritance of cellular organelles in eukaryotes: A critique of basic science validity and imprecision

We performed a systematic review to identify all original publications describing the asymmetric inheritance of cellular organelles in normal animal eukaryotic cells and to critique the validity and imprecision of the evidence. Searches were performed in Embase, MEDLINE and Pubmed up to November 2015. Screening of titles, abstracts and full papers was performed by two independent reviewers. Data extraction and validity were performed by one reviewer and checked by a second reviewer. Study quality was assessed using the SYRCLE risk of bias tool, for animal studies and by developing validity tools for the experimental model, organelle markers and imprecision. A narrative data synthesis was performed. We identified 31 studies (34 publications) of the asymmetric inheritance of organelles after mitotic or meiotic division. Studies for the asymmetric inheritance of centrosomes (n = 9); endosomes (n = 6), P granules (n = 4), the midbody (n = 3), mitochondria (n = 3), proteosomes (n = 2), spectrosomes (n = 2), cilia (n = 2) and endoplasmic reticulum (n = 2) were identified. Asymmetry was defined and quantified by variable methods. Assessment of the statistical reliability of the results indicated only two studies (7%) were judged to have low concern, the majority of studies (77%) were 'unclear' and five (16%) were judged to have 'high concerns'; the main reasons were low technical repeats (<10). Assessment of model validity indicated that the majority of studies (61%) were judged to be valid, ten studies (32%) were unclear and two studies (7%) were judged to have 'high concerns'; both described 'stem cells' without providing experimental evidence to confirm this (pluripotency and self-renewal). Assessment of marker validity indicated that no studies had low concern, most studies were unclear (96.5%), indicating there were insufficient details to judge if the markers were appropriate. One study had high concern for marker validity due to the contradictory results of two markers for the same organelle. For most studies the validity and imprecision of results could not be confirmed. In particular, data were limited due to a lack of reporting of interassay variability, sample size calculations, controls and functional validation of organelle markers. An evaluation of 16 systematic reviews containing cell assays found that only 50% reported adherence to PRISMA or ARRIVE reporting guidelines and 38% reported a formal risk of bias assessment. 44% of the reviews did not consider how relevant or valid the models were to the research question. 75% reviews did not consider how valid the markers were. 69% of reviews did not consider the impact of the statistical reliability of the results. Future systematic reviews in basic or preclinical research should ensure the rigorous reporting of the statistical reliability of the results in addition to the validity of the methods. Increased awareness of the importance of reporting guidelines and validation tools is needed for the scientific community.

Oral Mucosa Harbors a High Frequency of Endothelial Cells: A Novel Postnatal Cell Source for Angiogenic Regeneration

Endothelial progenitor cells/endothelial cells (EPCs/ECs) have great potential to treat pathological conditions such as cardiac infarction, muscle ischemia, and bone fractures, but isolation of EPC/ECs from existing cell sources is challenging due to their low EC frequency. We have isolated endothelial progenitor (EP)-like cells from rat oral mucosa and characterized their yield, immunophenotype, growth, and in vivo angiogenic potential. The frequency of EP-like cells derived from oral mucosa is thousands of folds higher than EPCs derived from donor-match bone marrow samples. EP-like cells from oral mucosa were positive for EC markers CD31, VE-Cadherin, and VEGFR2. Oral mucosa-derived EP-like cells displayed robust uptake of acetylated low-density lipoprotein and formed stable capillary networks in Matrigel. Subcutaneously implanted oral mucosa-derived EP-like cells anastomosed with host blood vessels, implicating their ability to elicit angiogenesis. Similar to endothelial colony-forming cells, EP-like cells from oral mucosa have a significantly higher proliferative rate than human umbilical vein endothelial cells. These findings identify a putative EPC source that is easily accessible in the oral cavity, potentially from discarded tissue specimens, and yet with robust yield and potency for angiogenesis in tissue and organ regeneration.