Effects of low-amplitude, high-frequency vibrations on proliferation and differentiation of SAOS-2 human osteogenic cell line

Impact of Local Vibration Training on Neuromuscular Activity, Muscle Cell, and Muscle Strength: A Review

This paper presents a review of studies on the effects of local vibration training (LVT) on muscle strength along with the associated changes in neuromuscular and cell dynamic responses. Application of local/direct vibration can significantly change the structural properties of muscle cell and can improve muscle strength. The improvement is largely dependent on vibration parameters such as amplitude and frequency. The results of 20 clinical studies reveal that electromyography (EMG) and maximal voluntary contraction (MVC) vary depending on vibration frequency, and studies using frequencies of 28-30 Hz reported greater increases in muscle activity in terms of EMG (rms) value and MVC data than the studies using higher frequencies. A greater muscle activity can be related to the recruitment of large motor units due to the application of local vibration. A greater increase in EMG (rms) values for biceps and triceps during extension than flexion under LVT suggests that types of muscles and their functions play an important role. Although a number of clinical trials and animal studies have demonstrated positive effects of vibration on muscle, an optimum training protocol has not been established. An attempt is made in this study to investigate the optimal LVT conditions on different muscles through review and analysis of published results in the literature pertaining to the changes in the neuromuscular activity. Directions for future research are discussed with regard to identifying optimal conditions for LVT and better understanding of the mechanisms associated with effects of vibration on muscles.

Design, Implementation, and Validation of a Piezoelectric Device to Study the Effects of Dynamic Mechanical Stimulation on Cell Proliferation, Migration and Morphology

Cell functions and behavior are regulated not only by soluble (biochemical) signals but also by biophysical and mechanical cues within the cells' microenvironment. Thanks to the dynamical and complex cell machinery, cells are genuine and effective mechanotransducers translating mechanical stimuli into biochemical signals, which eventually alter multiple aspects of their own homeostasis. Given the dominant and classic biochemical-based views to explain biological processes, it could be challenging to elucidate the key role that mechanical parameters such as vibration, frequency, and force play in biology. Gaining a better understanding of how mechanical stimuli (and their mechanical parameters associated) affect biological outcomes relies partially on the availability of experimental tools that may allow researchers to alter mechanically the cell's microenvironment and observe cell responses. Here, we introduce a new device to study in vitro responses of cells to dynamic mechanical stimulation using a piezoelectric membrane. Using this device, we can flexibly change the parameters of the dynamic mechanical stimulation (frequency, amplitude, and duration of the stimuli), which increases the possibility to study the cell behavior under different mechanical excitations. We report on the design and implementation of such device and the characterization of its dynamic mechanical properties. By using this device, we have performed a preliminary study on the effect of dynamic mechanical stimulation in a cell monolayer of an epidermal cell line (HaCaT) studying the effects of 1 Hz and 80 Hz excitation frequencies (in the dynamic stimuli) on HaCaT cell migration, proliferation, and morphology. Our preliminary results indicate that the response of HaCaT is dependent on the frequency of stimulation. The device is economic, easily replicated in other laboratories and can support research for a better understanding of mechanisms mediating cellular mechanotransduction.

Vibration of osteoblastic cells using a novel motion-control platform does not acutely alter cytosolic calcium, but desensitizes subsequent responses to extracellular ATP

Low-magnitude high-frequency mechanical vibration induces biological responses in many tissues. Like many cell types, osteoblasts respond rapidly to certain forms of mechanostimulation, such as fluid shear, with transient elevation in the concentration of cytosolic free calcium ([Ca²⁺ ]_i ). However, it is not known whether vibration of osteoblastic cells also induces acute elevation in [Ca²⁺ ]_i . To address this question, we built a platform for vibrating live cells that is compatible with microscopy and microspectrofluorometry, enabling us to observe immediate responses of cells to low-magnitude high-frequency vibrations. The horizontal vibration system was mounted on an inverted microscope, and its mechanical performance was evaluated using optical tracking and accelerometry. The platform was driven by a sinusoidal signal at 20-500 Hz, producing peak accelerations from 0.1 to 1 g. Accelerometer-derived displacements matched those observed optically within 10%. We then used this system to investigate the effect of acceleration on [Ca²⁺ ]_i in rodent osteoblastic cells. Cells were loaded with fura-2, and [Ca²⁺ ]_i was monitored using microspectrofluorometry and fluorescence ratio imaging. No acute changes in [Ca²⁺ ]_i or cell morphology were detected in response to vibration over the range of frequencies and accelerations studied. However, vibration did attenuate Ca²⁺ transients generated subsequently by extracellular ATP, which activates P2 purinoceptors and has been implicated in mechanical signaling in bone. In summary, we developed and validated a motion-control system capable of precisely delivering vibrations to live cells during real-time microscopy. Vibration did not elicit acute elevation of [Ca²⁺ ]_i , but did desensitize responses to later stimulation with ATP.

The Effect of Low-Magnitude Low-Frequency Vibrations (LMLF) on Osteogenic Differentiation Potential of Human Adipose Derived Mesenchymal Stem Cells

Introduction

In the current study, we investigated the effect of low magnitude, low frequency (LMLF) mechanical vibrations on the osteogenic differentiation potential of human adipose derived mesenchymal stem cells (hASC), taken from elderly patients.

Methods

During 21 days in osteogenic culture medium, cells were periodically exposed to three different frequencies (25, 35 and 45 Hz) of continuous sinusoidal oscillation, using a vibration generator. We measured cell proliferation, cell morphology, calcium and phosphorus deposition using Almar Blue assay, fluorescence microscopy, scanning electron microscopy, and a EDX detector, respectively. Osteogenic differentiation was measured by assessing protein and mRNA levels. Osteogenesis was confirmed by detection of specific markers with alkaline phosphatase and enzyme-linked immunosorbent assays for: bone morphogenetic protein 2 (BMP-2), osteocalcin (OCL) and osteopontin (OPN).

Results

We found that 25 Hz vibrations had the greatest impact on hASC morphology, ultrastructure, and proliferation. We observed the formation of osteocyte- and hydroxyapatite-like structures, an increased quantity of calcium and phosphorus deposits, and increased differentiation in the stimulated groups.

Conclusions

Our findings suggest that LMLF vibrations could be used to enhance cell-based therapies for treatment of bone deficits, particularly in elderly patients, where the need is greatest.

Administration duration influences the effects of low-magnitude, high-frequency vibration on ovariectomized rat bone

Low-magnitude, high-frequency vibration (LMHFV) has been proposed as a non-drug anti-osteoporosis treatment. However, the influence of administration duration on its effect is seldom investigated. In this study, the effect of 16-week LMHFV (0.3 g, 30 Hz, 20 min/day) on the bone mineral densities (BMDs), bone mechanical properties, and cellular responses of osteoporotic and healthy rats was examined by in vivo peripheral quantitative computed tomography (pQCT), fracture tests, cell assays, and mRNA quantification. Forty-eight adult rats were equally assigned to sham surgery (SHM), sham surgery with LMHFV (SHM+V), ovariectomy (OVX), and ovariectomy with LMHFV (OVX+V) groups. At week 8, LMHFV ameliorated ovariectomy-induced deterioration of trabecular bone, with a significantly higher tibia trabecular BMD (+11.2%) being noted in OVX+V rats (vs. OVX). However, this positive effect was not observed at later time points. Furthermore, 16 weeks of LMHFV caused significant reductions in the vertebral mean BMD (-13.0%), trabecular BMD (-15.7%), and maximum load (-21.5%) in OVX+V rats (vs. OVX). Osteoblasts derived from osteoporotic rat bone explants showed elevated BSP and OSX mRNA expression induced by LMHFV on day 1. However, no further positive effect on osteoblastic mRNA expression, alkaline phosphatase activity, or calcium deposition was observed with prolonged culture time. A higher ratio of RANKL/OPG induced by LMHFV suggests that osteoclastogenesis may be activated. Together, these results demonstrate that administration duration played an important role in the effect of LMHFV. Early exposure to LMHFV can positively modulate osteoporotic bone and osteoblasts; however, the beneficial effect seems not to persist over time. © 2015 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 34:1147-1157, 2016.

Effect of the gel elasticity of model skin matrices on the distance/depth-dependent transmission of vibration energy supplied from a cosmetic vibrator

OBJECTIVE

The purpose of this study was to determine how the energies supplied from a cosmetic vibrator are deeply or far transferred into organs and tissues, and how these depths or distances are influenced by tissue elasticity.

METHODS

External vibration energy was applied to model skin surfaces through a facial cleansing vibrator, and we measured a distance- and depth-dependent energy that was transferred to model skin matrices. As model skin matrices, we synthesized hard and soft poly(dimethylsiloxane) (PDMS) gels, as well as hydrogels with a modulus of 2.63 MPa, 0.33 MPa and 21 kPa, respectively, mostly representing those of skin and other organs. The transfer of vibration energy was measured either by increasing the separation distances or by increasing the depth from the vibrator.

RESULTS

The energies were transmitted deeper into the hard PDMS than into the soft PDMS and hydrogel matrices. This finding implies that the vibration forces influence a larger area of the gel matrices when the gels are more elastic (or rigid). There were no appreciable differences between the soft PDMS and hydrogel matrices. However, the absorbed energies were more concentrated in the area closest to the vibrator with decreasing elasticity of the matrix. Softer materials absorbed most of the supplied energy around the point of the vibrator. In contrast, harder materials scattered the external energy over a broad area.

CONCLUSIONS

The current results are the first report in estimating how the external energy is deeply or distantly transferred into a model skins depending on the elastic moduli of the models skins. In doing so, the results would be potentially useful in predicting the health of cells, tissues and organs exposed to various stimuli.

Cell Mechanosensitivity to Extremely Low-Magnitude Signals Is Enabled by a LINCed Nucleus

A cell's ability to recognize and adapt to the physical environment is central to its survival and function, but how mechanical cues are perceived and transduced into intracellular signals remains unclear. In mesenchymal stem cells (MSCs), high-magnitude substrate strain (HMS, ≥2%) effectively suppresses adipogenesis via induction of focal adhesion (FA) kinase (FAK)/mTORC2/Akt signaling generated at FAs. Physiologic systems also rely on a persistent barrage of low-level signals to regulate behavior. Exposing MSC to extremely low-magnitude mechanical signals (LMS) suppresses adipocyte formation despite the virtual absence of substrate strain (<0.001%), suggesting that LMS-induced dynamic accelerations can generate force within the cell. Here, we show that MSC response to LMS is enabled through mechanical coupling between the cytoskeleton and the nucleus, in turn activating FAK and Akt signaling followed by FAK-dependent induction of RhoA. While LMS and HMS synergistically regulated FAK activity at the FAs, LMS-induced actin remodeling was concentrated at the perinuclear domain. Preventing nuclear-actin cytoskeleton mechanocoupling by disrupting linker of nucleoskeleton and cytoskeleton (LINC) complexes inhibited these LMS-induced signals as well as prevented LMS repression of adipogenic differentiation, highlighting that LINC connections are critical for sensing LMS. In contrast, FAK activation by HMS was unaffected by LINC decoupling, consistent with signal initiation at the FA mechanosome. These results indicate that the MSC responds to its dynamic physical environment not only with "outside-in" signaling initiated by substrate strain, but vibratory signals enacted through the LINC complex enable matrix independent "inside-inside" signaling.

Fluid-Structure Interactions Analysis of Shear-Induced Modulation of a Mesenchymal Stem Cell: An Image-Based Study

Although effects of biochemical modulation of stem cells have been widely investigated, only recent advances have been made in the identification of mechanical conditioning on cell signaling pathways. Experimental investigations quantifying the micromechanical environment of mesenchymal stem cells (MSCs) are challenging while computational approaches can predict their behavior due to in vitro stimulations. This study introduces a 3D cell-specific finite element model simulating large deformations of MSCs. Here emphasizing cell mechanical modulation which represents the most challenging multiphysics phenomena in sub-cellular level, we focused on an approach attempting to elicit unique responses of a cell under fluid flow. Fluorescent staining of MSCs was performed in order to visualize the MSC morphology and develop a geometrically accurate model of it based on a confocal 3D image. We developed a 3D model of a cell fixed in a microchannel under fluid flow and then solved the numerical model by fluid-structure interactions method. By imposing flow characteristics representative of vigorous in vitro conditions, the model predicts that the employed external flow induces significant localized effective stress in the nucleo-cytoplasmic interface and average cell deformation of about 40%. Moreover, it can be concluded that a lower strain level is made in the cell by the oscillatory flow as compared with steady flow, while same ranges of effective stress are recorded inside the cell in both conditions. The deeper understanding provided by this study is beneficial for better design of single cell in vitro studies.

Enhancing proliferation and ECM expression of human ACL fibroblasts by sonic vibration

Effects of mechanical vibration on cell activity and behavior remain controversial: There has been evidence on both positive and negative effects. Furthermore, research on the anterior cruciate ligament (ACL) has as yet been limited and the frequency-related effects remain unknown, even though ACL injury is common and an injured ACL hardly spontaneously recovers. The object of this work was to address the influence of mechanical vibration on ACL fibroblasts, to determine the effects of frequencies, and to further study this effect at the cellular level. We found that sonic vibration affected ACL fibroblasts' proliferation and metabolism in a frequency-dependent manner, and 20 Hz gave rise to the most ACL cell activity and comprehensively increased extracellular matrix (ECM) contents, including collagen type I, collagen type III, fibronectin, elastin, tenascin, glycosaminoglycan (GAG), and the cytoskeleton protein vimentin. Thus, our results indicate that sonic vibration possesses frequency-dependent effects on proliferation and productivity of ACL fibroblast with an optimal frequency of 20 Hz under the present stimulation conditions, providing further information for future research in how vibrational stimulation manipulates ACL cellular behavior.

Vibration stimuli and the differentiation of musculoskeletal progenitor cells: Review of results in vitro and in vivo

Due to the increasing burden on healthcare budgets of musculoskeletal system disease and injury, there is a growing need for safe, effective and simple therapies. Conditions such as osteoporosis severely impact on quality of life and result in hundreds of hours of hospital time and resources. There is growing interest in the use of low magnitude, high frequency vibration (LMHFV) to improve bone structure and muscle performance in a variety of different patient groups. The technique has shown promise in a number of different diseases, but is poorly understood in terms of the mechanism of action. Scientific papers concerning both the in vivo and in vitro use of LMHFV are growing fast, but they cover a wide range of study types, outcomes measured and regimens tested. This paper aims to provide an overview of some effects of LMHFV found during in vivo studies. Furthermore we will review research concerning the effects of vibration on the cellular responses, in particular for cells within the musculoskeletal system. This includes both osteogenesis and adipogenesis, as well as the interaction between MSCs and other cell types within bone tissue.

Frequency-Dependence of Mechanically Stimulated Osteoblastic Calcification in Tissue-Engineered Bone In Vitro

The effect of mechanical stimulation on osteogenesis remains controversial, especially with respect to the loading frequency that maximizes osteogenesis. Mechanical stimulation at an optimized frequency may be beneficial for the bone tissue regeneration to promote osteoblastic calcification. The objective of this study was to investigate the frequency-dependent effect of mechanical loading on osteoblastic calcification in the tissue-engineered bones in vitro. Tissue-engineered bones were constructed by seeding rat osteoblasts into a type I collagen sponge scaffold at a cell density of 1600 or 24,000 cells/mm(3). Sinusoidal compressive deformation at the peak of 0.2% was applied to the tissue-engineered bones at 0.2, 2, 10, 20, 40, and 60 Hz for 3 min/day for 14 consecutive days. Optically-monitored calcium content started to increase on days 5-7 and reached the highest value at 2 Hz on day 14; however, no increase was observed at 0.2 Hz and in the control. Ash content measured after the mechanical stimulation also showed the highest at 2 Hz despite the differences in cell seeding density. It was concluded that mechanical stimulation at 2 Hz showed the highest promotional effect for osteogenesis in vitro among the frequencies selected in this study.

Reversal of the detrimental effects of simulated microgravity on human osteoblasts by modified low intensity pulsed ultrasound

Microgravity (MG) is known to induce bone loss in astronauts during long-duration space mission because of a lack of sufficient mechanical stimulation under MG. It has been demonstrated that mechanical signals are essential for maintaining cell viability and motility, and they possibly serve as a countermeasure to the catabolic effects of MG. The objective of this study was to examine the effects of high-frequency acoustic wave signals on osteoblasts in a simulated microgravity (SMG) environment (created using 1-D clinostat bioreactor) using a modified low-intensity pulsed ultrasound (mLIPUS). Specifically, we evaluated the hypothesis that osteoblasts (human fetal osteoblastic cell line) exposure to mLIPUS for 20 min/d at 30 mW/cm(2) will significantly reduce the detrimental effects of SMG. Effects of SMG with mLIPUS were analyzed using the MTS proliferation assay for proliferation, phalloidin for F-actin staining, Sirius red stain for collagen, and Alizarin red for mineralization. Our data showed that osteoblast exposure to SMG results in significant decreases in proliferation (∼ -38% and ∼ -44% on days 4 and 6, respectively; p < 0.01), collagen content (∼ -22%; p < 0.05) and mineralization (∼ -37%; p < 0.05) and actin stress fibers. In contrast, mLIPUS stimulation in SMG condition significantly increases the rate of proliferation (∼24% by day 6; p < 0.05), collagen content (∼52%; p < 0.05) and matrix mineralization (∼25%; p < 0.001) along with restoring formation of actin stress fibers in the SMG-exposed osteoblasts. These data suggest that the acoustic wave can potentially be used as a countermeasure for disuse osteopenia.

High-Frequency Vibration Treatment of Human Bone Marrow Stromal Cells Increases Differentiation toward Bone Tissue

In order to verify whether differentiation of adult stem cells toward bone tissue is promoted by high-frequency vibration (HFV), bone marrow stromal cells (BMSCs) were mechanically stimulated with HFV (30 Hz) for 45 minutes a day for 21 or 40 days. Cells were seeded in osteogenic medium, which enhances differentiation towards bone tissue. The effects of the mechanical treatment on differentiation were measured by Alizarin Red test, (q) real-time PCR, and protein content of the extracellular matrix. In addition, we analyzed the proliferation rate and apoptosis of BMSC subjected to mechanical stimulation. A strong increase in all parameters characterizing differentiation was observed. Deposition of calcium was almost double in the treated samples; the expression of genes involved in later differentiation was significantly increased and protein content was higher for all osteogenic proteins. Lastly, proliferation results indicated that stimulated BMSCs have a decreased growth rate in comparison with controls, but both treated and untreated cells do not enter the apoptosis process. These findings could reduce the gap between research and clinical application for bone substitutes derived from patient cells by improving the differentiation protocol for autologous cells and a further implant of the bone graft into the patient.

Human mesenchymal stromal cells are mechanosensitive to vibration stimuli

Low-magnitude high-frequency (LMHF) vibrations have the ability to stimulate bone formation and reduce bone loss. However, the anabolic mechanisms that are mediated by vibration in human bone cells at the cellular level remain unclear. We hypothesized that human mesenchymal stromal cells (hMSCs) display direct osteoblastic responses to LMHF vibration signals. Daily exposure to vibrations increased the proliferation of hMSCs, with the highest efficiency occurring at a peak acceleration of 0.3 g and vibrations at 30 to 40 Hz. Specifically, these conditions promoted osteoblast differentiation through an increase in alkaline phosphatase activity and in vitro matrix mineralization. The effect of vibration on the expression of osteogenesis-related factors differed depending on culture method. hMSCs that underwent vibration in a monolayer culture did not exhibit any changes in the expressions of these genes, while cells in three-dimensional culture showed increased expression of type I collagen, osteoprotegerin, or VEGF, and VEGF induction appeared in 2 different hMSC lines. These results are among the first to demonstrate a dose-response effect upon LMHF stimulation, thereby demonstrating that hMSCs are mechanosensitive to LMHF vibration signals such that they could facilitate the osteogenic process.

Stimulation of sub-sonic vibration promotes the differentiation of adipose tissue-derived mesenchymal stem cells into neural cells

AIMS

Adipose tissue-derived stem cells (AT-MSCs) have been proposed as a new source for nervous tissue damage due to their capacity of neural differentiation potential including neurons, oligodendrocytes and astrocytes. Recently, many studies have demonstrated that sub-sonic vibration (SSV) is an effective cell differentiation method but there have been no studies on the effect of SSV about AT-MSC differentiation into neural-like cells in vitro. Therefore, we examined the effect of SSV on AT-MSCs to investigate the differentiation potential of neural-like cells.

MAIN METHODS

We assessed the changes in AT-MSCs by SSV during 4 days at 10, 20, 30 and 40 Hz (1.0 V). After stimulation, they were analyzed by RT-PCR, Western blot and immunohistological analysis using neural cell type-specific genes and antibodies. Further, to confirm the neural differentiation, we investigated adipogenic genes for RT-PCR analysis. For a mechanism study, we analyzed activation levels in time course of ERK phosphorylation after SSV.

KEY FINDINGS

After 4-day SSV exposure, we observed morphological changes of AT-MSCs. Further, SSV induced gene/protein levels of neural markers while inhibiting adipogenesis and they were mainly upregulated at 30 Hz. In addition, phosphorylated ERK level was increased in a time-dependent manner upon 30 Hz SSV for 6h.

SIGNIFICANCE

These results demonstrated that SSV affects AT-MSCs differentiation potential and 30 Hz SSV affected neural differentiation on AT-MSCs.

Low-amplitude high frequency vibration down-regulates myostatin and atrogin-1 expression, two components of the atrophy pathway in muscle cells

Whole body vibration (WBV) is a very widespread mechanical stimulus used in physical therapy, rehabilitation and fitness centres. It has been demonstrated that vibration induces improvements in muscular strength and performance and increases bone density. We investigated the effects of low-amplitude, high frequency vibration (HFV) at the cellular and tissue levels in muscle. We developed a system to produce vibrations adapted to test several parameters in vitro and in vivo. For in vivo experiments, we used newborn CD1 wild-type mice, for in vitro experiments, we isolated satellite cells from 6-day-old CD1 mice, while for proliferation studies, we used murine cell lines. Animals and cells were treated with high frequency vibration at 30 Hz. We analyzed the effects of mechanical stimulation on muscle hypertrophy/atrophy pathways, fusion enhancement of myoblast cells and modifications in the proliferation rate of cells. Results demonstrated that mechanical vibration strongly down-regulates atrophy genes both in vivo and in vitro. The in vitro experiments indicated that mechanical stimulation promotes fusion of satellite cells treated directly in culture compared to controls. Finally, proliferation experiments indicated that stimulated cells had a decreased growth rate compared to controls. We concluded that vibration treatment at 30 Hz is effective in suppressing the atrophy pathway both in vivo and in vitro and enhances fusion of satellite muscle cells.

The sensitivity of human mesenchymal stem cells to vibration and cold storage conditions representative of cold transportation

In the current study, the mechanical and hypothermic damage induced by vibration and cold storage on human mesenchymal stem cells (hMSCs) stored at 2-8°C was quantified by measuring the total cell number and cell viability after exposure to vibration at 50 Hz (peak acceleration 140 m s(-2) and peak displacement 1.4 mm), 25 Hz (peak acceleration 140 m s(-2), peak displacement 5.7 mm), 10 Hz (peak acceleration 20 m s(-2), peak displacement 5.1 mm) and cold storage for several durations. To quantify the viability of the cells, in addition to the trypan blue exclusion method, the combination of annexin V-FITC and propidium iodide was applied to understand the mode of cell death. Cell granularity and a panel of cell surface markers for stemness, including CD29, CD44, CD105 and CD166, were also evaluated for each condition. It was found that hMSCs were sensitive to vibration at 25 Hz, with moderate effects at 50 Hz and no effects at 10 Hz. Vibration at 25 Hz also increased CD29 and CD44 expression. The study further showed that cold storage alone caused a decrease in cell viability, especially after 48 h, and also increased CD29 and CD44 and attenuated CD105 expressions. Cell death would most likely be the consequence of membrane rupture, owing to necrosis induced by cold storage. The sensitivity of cells to different vibrations within the mechanical system is due to a combined effect of displacement and acceleration, and hMSCs with a longer cold storage duration were more susceptible to vibration damage, indicating a coupling between the effects of vibration and cold storage.

Separating Fluid Shear Stress from Acceleration during Vibrations in Vitro: Identification of Mechanical Signals Modulating the Cellular Response

The identification of the physical mechanism(s) by which cells can sense vibrations requires the determination of the cellular mechanical environment. Here, we quantified vibration-induced fluid shear stresses in vitro and tested whether this system allows for the separation of two mechanical parameters previously proposed to drive the cellular response to vibration - fluid shear and peak accelerations. When peak accelerations of the oscillatory horizontal motions were set at 1g and 60Hz, peak fluid shear stresses acting on the cell layer reached 0.5Pa. A 3.5-fold increase in fluid viscosity increased peak fluid shear stresses 2.6-fold while doubling fluid volume in the well caused a 2-fold decrease in fluid shear. Fluid shear was positively related to peak acceleration magnitude and inversely related to vibration frequency. These data demonstrated that peak shear stress can be effectively separated from peak acceleration by controlling specific levels of vibration frequency, acceleration, and/or fluid viscosity. As an example for exploiting these relations, we tested the relevance of shear stress in promoting COX-2 expression in osteoblast like cells. Across different vibration frequencies and fluid viscosities, neither the level of generated fluid shear nor the frequency of the signal were able to consistently account for differences in the relative increase in COX-2 expression between groups, emphasizing that the eventual identification of the physical mechanism(s) requires a detailed quantification of the cellular mechanical environment.

Finite-element modeling of viscoelastic cells during high-frequency cyclic strain

Mechanotransduction refers to the mechanisms by which cells sense and respond to local loads and forces. The process of mechanotransduction plays an important role both in maintaining tissue viability and in remodeling to repair damage; moreover, it may be involved in the initiation and progression of diseases such as osteoarthritis and osteoporosis. An understanding of the mechanisms by which cells respond to surrounding tissue matrices or artificial biomaterials is crucial in regenerative medicine and in influencing cellular differentiation. Recent studies have shown that some cells may be most sensitive to low-amplitude, high-frequency (i.e., 1-100 Hz) mechanical stimulation. Advances in finite-element modeling have made it possible to simulate high-frequency mechanical loading of cells. We have developed a viscoelastic finite-element model of an osteoblastic cell (including cytoskeletal actin stress fibers), attached to an elastomeric membrane undergoing cyclic isotropic radial strain with a peak value of 1,000 µstrain. The results indicate that cells experience significant stress and strain amplification when undergoing high-frequency strain, with peak values of cytoplasmic strain five times higher at 45 Hz than at 1 Hz, and peak Von Mises stress in the nucleus increased by a factor of two. Focal stress and strain amplification in cells undergoing high-frequency mechanical stimulation may play an important role in mechanotransduction.

The differentiation of human adipose-derived stem cells (hASCs) into osteoblasts is promoted by low amplitude, high frequency vibration treatment

Several studies have demonstrated that tissue culture conditions influence the differentiation of human adipose-derived stem cells (hASCs). Recently, studies performed on SAOS-2 and bone marrow stromal cells (BMSCs) have shown the effectiveness of high frequency vibration treatment on cell differentiation to osteoblasts. The aim of this study was to evaluate the effects of low amplitude, high frequency vibrations on the differentiation of hASCs toward bone tissue. In view of this goal, hASCs were cultured in proliferative or osteogenic media and stimulated daily at 30Hz for 45min for 28days. The state of calcification of the extracellular matrix was determined using the alizarin assay, while the expression of extracellular matrix and associated mRNA was determined by ELISA assays and quantitative RT-PCR (qRT-PCR). The results showed the osteogenic effect of high frequency vibration treatment in the early stages of hASC differentiation (after 14 and 21days). On the contrary, no additional significant differences were observed after 28days cell culture. Transmission Electron Microscopy (TEM) images performed on 21day samples showed evidence of structured collagen fibers in the treated samples. All together, these results demonstrate the effectiveness of high frequency vibration treatment on hASC differentiation toward osteoblasts.

The effects of vibration loading on adipose stem cell number, viability and differentiation towards bone-forming cells

Mechanical stimulation is an essential factor affecting the metabolism of bone cells and their precursors. We hypothesized that vibration loading would stimulate differentiation of human adipose stem cells (hASCs) towards bone-forming cells and simultaneously inhibit differentiation towards fat tissue. We developed a vibration-loading device that produces 3g peak acceleration at frequencies of 50 and 100 Hz to cells cultured on well plates. hASCs were cultured using either basal medium (BM), osteogenic medium (OM) or adipogenic medium (AM), and subjected to vibration loading for 3 h d(-1) for 1, 7 and 14 day. Osteogenesis, i.e. differentiation of hASCs towards bone-forming cells, was analysed using markers such as alkaline phosphatase (ALP) activity, collagen production and mineralization. Both 50 and 100 Hz vibration frequencies induced significantly increased ALP activity and collagen production of hASCs compared with the static control at 14 day in OM. A similar trend was detected for mineralization, but the increase was not statistically significant. Furthermore, vibration loading inhibited adipocyte differentiation of hASCs. Vibration did not affect cell number or viability. These findings suggest that osteogenic culture conditions amplify the stimulatory effect of vibration loading on differentiation of hASCs towards bone-forming cells.

Effects of sub-sonic vibration on the proliferation and maturation of 3T3-L1 cells

AIMS

Although low and high intensity sub-sonic vibrations (SSV) have been shown to facilitate wound healing, very few studies have investigated the effects of SSV on 3T3-L1 preadipocytes. Therefore, the present study was undertaken to investigate the influence of SSV on the proliferation and maturation of 3T3-L1 preadipocytes.

MAIN METHODS

To evaluate the effect of SSV on 3T3-L1 cell proliferation, the cells were maintained in an apparatus that administered SSV (0.5 V) for 3 days at a frequency of 10, 20, 30, or 40 Hz. In addition, to study the effect of SSV on 3T3-L1 cell maturation, the cells were stimulated with SSV for 6 days at a frequency of 10, 20, 30, or 45 Hz.

KEY FINDINGS

Sub-sonic vibrations inhibited the proliferation of 3T3-L1 preadipocytes at frequencies of 20 and 30 Hz. Triglyceride levels in cells subjected to SSV at frequencies ranging from 10 to 30 Hz increased compared with those measured in control cells. The expression of adipogenic genes, such as PPAR-γ and C/EBP-α, markedly increased in response to SSV at 20 Hz and 30 Hz during maturation.

SIGNIFICANCE

These results suggest that SSV affected adipogenic gene expression at 20 and 30 Hz.