TexMi: development of tissue-engineered textile-reinforced mitral valve prosthesis

Structural and biomechanical characterizations of acellular porcine mitral valve scaffolds: anterior leaflets, posterior leaflets, and chordae tendineae

Mitral valve (MV) tissue engineering is still in its early stage, and one major challenge in MV tissue engineering is to identify appropriate scaffold materials. With the potential of acellular MV scaffolds being demonstrated recently, it is important to have a full understanding of the biomechanics of the native MV components and their acellular scaffolds. In this study, we have successfully characterized the structural and mechanical properties of porcine MV components, including anterior leaflet (AL), posterior leaflet (PL), strut chordae, and basal chordae, before and after decellularization. Quantitative DNA assay showed more than 90% reduction in DNA content, and Griffonia simplicifolia (GS) lectin immunohistochemistry confirmed the complete lack of porcine α-Gal antigen in the acellular MV components. In the acellular AL and PL, the atrialis, spongiosa, and fibrosa trilayered structure, along with its ECM constitutes, i.e., collagen fibers, elastin fibers, and portion of GAGs, were preserved. Nevertheless, the ECM of both AL and PL experienced a certain degree of disruption, exhibiting a less dense, porous ECM morphology. The overall anatomical morphology of the strut and basal chordae were also maintained after decellularization, with longitudinal morphology experiencing minimum disruption, but the cross-sectional morphology exhibiting evenly-distributed porous structure. In the acellular AL and PL, the nonlinear anisotropic biaxial mechanical behavior was overall preserved; however, uniaxial tensile tests showed that the removal of cellular content and the disruption of structural ECM did result in small decreases in maximum tensile modulus, tissue extensibility, failure stress, and failure strain for both MV leaflets and chordae.

Towards technically controlled bioreactor maturation of tissue-engineered heart valves

Bioreactors are important tools for the pre-conditioning of tissue-engineered heart valves. The current state of the art mostly provides for timed, physical and biochemical stimulation in the bioreactor systems according to standard protocols (SOP). However, this does not meet to the individual biological variability of living tissue-engineered constructs. To achieve this, it is necessary to implement (i) sensory systems that detect the actual status of the implant and (ii) controllable bioreactor systems that allow patient-individualized pre-conditioning. During the maturation process, a pulsatile transvalvular flow of culture medium is generated within the bioreactor. For the improvement of this conditioning procedure, the relationship between the mechanical and biochemical stimuli and the corresponding tissue response has to be analyzed by performing reproducible and comparable experiments. In this work, a technological framework for maturation experiments of tissue-engineered heart valves in a pulsating bioreactor is introduced. The aim is the development of a bioreactor system that allows for continuous control and documentation of the conditioning process to increase reproducibility and comparability of experiments. This includes hardware components, a communication structure and software including online user communication and supervision. Preliminary experiments were performed with a tissue-engineered heart valve to evaluate the function of the new system. The results of the experiment proof the adequacy of the setup. Consequently, the concept is an important step for further research towards controlled maturation of tissue-engineered heart valves. The integration of molecular and histological sensor systems will be the next important step towards a fully automated, self-controlled preconditioning system.

Fibrosis in tissue engineering and regenerative medicine: treat or trigger?

Fibrosis is a life-threatening pathological condition resulting from a dysfunctional tissue repair process. There is no efficient treatment and organ transplantation is in many cases the only therapeutic option. Here we review tissue engineering and regenerative medicine (TERM) approaches to address fibrosis in the cardiovascular system, the kidney, the lung and the liver. These strategies have great potential to achieve repair or replacement of diseased organs by cell- and material-based therapies. However, paradoxically, they might also trigger fibrosis. Cases of TERM interventions with adverse outcome are also included in this review. Furthermore, we emphasize the fact that, although organ engineering is still in its infancy, the advances in the field are leading to biomedically relevant in vitro models with tremendous potential for disease recapitulation and development of therapies. These human tissue models might have increased predictive power for human drug responses thereby reducing the need for animal testing.

The quest for mechanically and biologically functional soft biomaterials via soft network composites

Developing multifunctional soft biomaterials capable of addressing all the requirements of the complex tissue regeneration process is a multifaceted problem. In order to tackle the current challenges, recent research efforts are increasingly being directed towards biomimetic design concepts that can be translated into soft biomaterials via advanced manufacturing technologies. Among those, soft network composites consisting of a continuous hydrogel matrix and a reinforcing fibrous network closely resemble native soft biological materials in terms of design and composition as well as physicochemical properties. This article reviews soft network composite systems with a particular emphasis on the design, biomaterial and fabrication aspects within the context of soft tissue engineering and drug delivery applications.

Chemically defined, ultrasoft PDMS elastomers with selectable elasticity for mechanobiology

Living animal cells are strongly influenced by the mechanical properties of their environment. To model physiological conditions ultrasoft cell culture substrates, in some instances with elasticity (Young's modulus) of only 1 kPa, are mandatory. Due to their long shelf life PDMS-based elastomers are a popular choice. However, uncertainty about additives in commercial formulations and difficulties to reach very soft materials limit their use. Here, we produced silicone elastomers from few, chemically defined and commercially available substances. Elastomers exhibited elasticities in the range from 1 kPa to 55 kPa. In detail, a high molecular weight (155 kg/mol), vinyl-terminated linear silicone was crosslinked with a multifunctional (f = 51) crosslinker (a copolymer of dimethyl siloxane and hydrosilane) by a platinum catalyst. The following different strategies towards ultrasoft materials were explored: sparse crosslinking, swelling with inert silicone polymers, and, finally, deliberate introduction of dangling ends into the network (inhibition). Rheological experiments with very low frequencies led to precise viscoelastic characterizations. All strategies enabled tuning of stiffness with the lowest stiffness of ~1 kPa reached by inhibition. This system was also most practical to use. Biocompatibility of materials was tested using primary cortical neurons from rats. Even after several days of cultivation no adverse effects were found.

Umbilical cord as human cell source for mitral valve tissue engineering - venous vs. arterial cells

Around 2% of the population in developed nations are affected by mitral valve disease and available valvular replacements are not designed for the atrioventricular position. Recently our group developed the first tissue-engineered heart valve (TEHV) specifically designed for the mitral position - the TexMi valve. The valve recapitulates the main components of the native valve, i.e. annulus, asymmetric leaflets and the crucial chordae tendineae. In the present study, we evaluated the human umbilical cord as a clinically applicable cell source for the TexMi valve. Valves produced with cells isolated from human umbilical cord veins (HUVs) and human umbilical cord arteries (HUAs) were conditioned for 21 days in custom-made bioreactors and evaluated in terms of extracellular matrix (ECM) composition and mechanical properties. In addition, static cell-laden fibrin discs were molded to investigate cell-mediated tissue contraction and differences in ECM production. HUA and HUV cells were able to deliver functional valves with a rich ECM composed mainly of collagen. Particularly noteworthy was the synthesis of elastin, which has been observed rarely in TEHV. The elastin synthesis was significantly higher in TexMi valves produced with HUV cells and therefore the HUV is considered to be the preferred cell source.

Knitting for heart valve tissue engineering

Knitting is a versatile technology which offers a large portfolio of products and solutions of interest in heart valve (HV) tissue engineering (TE). One of the main advantages of knitting is its ability to construct complex shapes and structures by precisely assembling the yarns in the desired position. With this in mind, knitting could be employed to construct a HV scaffold that closely resembles the authentic valve. This has the potential to reproduce the anisotropic structure that is characteristic of the heart valve with the yarns, in particular the 3-layered architecture of the leaflets. These yarns can provide oriented growth of cells lengthwise and consequently enable the deposition of extracellular matrix (ECM) proteins in an oriented manner. This technique, therefore, has a potential to provide a functional knitted scaffold, but to achieve that textile engineers need to gain a basic understanding of structural and mechanical aspects of the heart valve and in addition, tissue engineers must acquire the knowledge of tools and capacities that are essential in knitting technology. The aim of this review is to provide a platform to consolidate these two fields as well as to enable an efficient communication and cooperation among these two research areas.

Towards 3D in vitro models for the study of cardiovascular tissues and disease

The field of tissue engineering is developing biomimetic biomaterial scaffolds that are showing increasing therapeutic potential for the repair of cardiovascular tissues. However, a major opportunity exists to use them as 3D in vitro models for the study of cardiovascular tissues and disease in addition to drug development and testing. These in vitro models can span the gap between 2D culture and in vivo testing, thus reducing the cost, time, and ethical burden of current approaches. Here, we outline the progress to date and the requirements for the development of ideal in vitro 3D models for blood vessels, heart valves, and myocardial tissue.

Generation and Assessment of Functional Biomaterial Scaffolds for Applications in Cardiovascular Tissue Engineering and Regenerative Medicine

Current clinically applicable tissue and organ replacement therapies are limited in the field of cardiovascular regenerative medicine. The available options do not regenerate damaged tissues and organs, and, in the majority of the cases, show insufficient restoration of tissue function. To date, anticoagulant drug-free heart valve replacements or growing valves for pediatric patients, hemocompatible and thrombus-free vascular substitutes that are smaller than 6 mm, and stem cell-recruiting delivery systems that induce myocardial regeneration are still only visions of researchers and medical professionals worldwide and far from being the standard of clinical treatment. The design of functional off-the-shelf biomaterials as well as automatable and up-scalable biomaterial processing methods are the focus of current research endeavors and of great interest for fields of tissue engineering and regenerative medicine. Here, various approaches that aim to overcome the current limitations are reviewed, focusing on biomaterials design and generation methods for myocardium, heart valves, and blood vessels. Furthermore, novel contact- and marker-free biomaterial and extracellular matrix assessment methods are highlighted.

Multiple-Step Injection Molding for Fibrin-Based Tissue-Engineered Heart Valves

Heart valves are elaborate and highly heterogeneous structures of the circulatory system. Despite the well accepted relationship between the structural and mechanical anisotropy and the optimal function of the valves, most approaches to create tissue-engineered heart valves (TEHVs) do not try to mimic this complexity and rely on one homogenous combination of cells and materials for the whole construct. The aim of this study was to establish an easy and versatile method to introduce spatial diversity into a heart valve fibrin scaffold. We developed a multiple-step injection molding process that enables the fabrication of TEHVs with heterogeneous composition (cell/scaffold material) of wall and leaflets without the need of gluing or suturing components together, with the leaflets firmly connected to the wall. The integrity of the valves and their functionality was proved by either opening/closing cycles in a bioreactor (proof of principle without cells) or with continuous stimulation over 2 weeks. We demonstrated the potential of the method by the two-step molding of the wall and the leaflets containing different cell lines. Immunohistology after stimulation confirmed tissue formation and demonstrated the localization of the different cell types. Furthermore, we showed the proof of principle fabrication of valves using different materials for wall (fibrin) and leaflets (hybrid gel of fibrin/elastin-like recombinamer) and with layered leaflets. The method is easy to implement, does not require special facilities, and can be reproduced in any tissue-engineering lab. While it has been demonstrated here with fibrin, it can easily be extended to other hydrogels.

Tissue-engineered mitral valve: morphology and biomechanics †

OBJECTIVES

The present study aimed at developing tissue-engineered mitral valves based on cell-free ovine mitral allografts.

METHODS

The ovine mitral valves (OMVs) (n = 46) were harvested in the local slaughter house. They were decellularized using detergent solutions and DNase. The effectiveness of decellularization was assessed by histological (haematoxylin-eosin, Movat's pentachrome) and immunofluorescent staining (for DNA and α-Gal), and DNA-quantification. To reveal the receptiveness of decellularized tissue to endothelial cells (ECs), the valve leaflets were reseeded with ovine ECs, derived from endothelial progenitor cells in vitro. For assessment of biomechanical properties, uniaxial tensile tests were carried out.

RESULTS

Histology and immunofluorescent staining revealed absence of cell nuclei in decellularized leaflets, chordae and papillary muscles. According to the software for immunofluorescence analysis, reduction in DNA and α-Gal was 99.9 and 99.6%, respectively. DNA-quantification showed 71.2% reduction in DNA content without DNase and 96.4% reduction after DNase treatment. Decellularized leaflets were comparable with native in ultimate tensile strain (native, 0.34 ± 0.09 mm/mm, vs decellularized, 0.44 ± 0.1 mm/mm; P = 0.09), and elastin modulus (native, 0.39 ± 0.27, vs decellularized, 0.57 ± 0.55, P = 0.46), had increased ultimate tensile stress (native, 1.23 ± 0.35 MPa, vs decellularized 2.12 ± 0.43 MPa; P = 0.001) and collagen modulus (native, 5.5 ± 1.26, vs decellularized, 8.29 ± 2.9; P = 0.04). After EC seeding, immunofluorescent staining revealed a monolayer of CD31-, eNOS- and vWF-positive cells on the surface of the leaflet, as well as a typical cobble-stone morphology of those cells.

CONCLUSIONS

Decellularization of ovine mitral valve results in a mitral valves scaffold with mechanical properties comparable with native tissue, and a graft surface, which can be repopulated by endothelial cells.