Live Quantitative Monitoring of Mineral Deposition in Stem Cells Using Tetracycline Hydrochloride

In vitrodegradation of a chitosan-based osteochondral construct points to a transient effect on cellular viability

Bioresorbable chitosan scaffolds have shown potential for osteochondral repair applications. Thein vivodegradation of chitosan, mediated by lysozyme and releasing glucosamine, enables progressive replacement by ingrowing tissue. Here the degradation process of a chitosan-nHA based bioresorbable scaffold was investigated for mass loss, mechanical properties and degradation products released from the scaffold when subjected to clinically relevant enzyme concentrations. The scaffold showed accelerated mass loss during the early stages of degradation but without substantial reduction in mechanical strength or structure deterioration. Although not cytotoxic, the medium in which the scaffold was degraded for over 2 weeks showed a transient decrease in mesenchymal stem cell viability, and the main degradation product (glucosamine) demonstrated a possible adverse effect on viability when added at its peak concentration. This study has implications for the design and biomedical application of chitosan scaffolds, underlining the importance of modelling degradation products to determine suitability for clinical translation.

3D printing nacre powder/sodium alginate scaffold loaded with PRF promotes bone tissue repair and regeneration

Bone defects are a common complication of bone diseases, which often affect the quality of life and mental health of patients. The use of biomimetic bone scaffolds loaded with bioactive substances has become a focal point in the research on bone defect repair. In this study, composite scaffolds resembling bone tissue were created using nacre powder (NP) and sodium alginate (SA) through 3D printing. These scaffolds exhibit several physiological structural and mechanical characteristics of bone tissue, such as suitable porosity, an appropriate pore size, applicable degradation performance and satisfying the mechanical requirements of cancellous bone, etc. Then, platelet-rich fibrin (PRF), containing a mass of growth factors, was loaded on the NP/SA scaffolds. This was aimed to fully maximize the synergistic effect with NP, thereby accelerating bone tissue regeneration. Overall, this study marks the first instance of preparing a bionic bone structure scaffold containing NP by 3D printing technology, which is combined with PRF to further accelerate bone regeneration. These findings offer a new treatment strategy for bone tissue regeneration in clinical applications.

Effects of Daidzein, Tempeh, and a Probiotic Digested in an Artificial Gastrointestinal Tract on Calcium Deposition in Human Osteoblast-like Saos-2 Cells

Adequate calcium intake is crucial for the prevention and treatment of bone-related issues. Developing a nutritional source of readily bioavailable calcium is particularly significant for individuals deficient in this essential element and at risk of developing osteoporosis. This research aimed to evaluate the impact of tempeh (T), daidzein (D), and Lactobacillus acidophilus (LA) within a simulated intestinal environment consisting of Caco-2 epithelial and Saos-2 cells, focusing on their implications for bone mineralization mechanisms. In the initial phase, calcium bioaccessibility from calcium citrate (CaCt), LA, D, the daidzein combination D-CaCt-LA (D1:1:1), and the tempeh combination T-CaCt-LA (T1:1:1) was assessed through digestion simulation. The calcium content of both untreated and digested samples was determined using atomic absorption spectrometry (AAS). In the subsequent stage, the digested samples were used to induce intestinal absorption in differentiated enterocyte-like Caco-2 cells. The permeable fractions were then evaluated in a culture of osteoblast-like Saos-2 cells. Preliminary cellular experiments employed the MTT assay to assess cytotoxicity. The results indicated that the analyzed products did not influence the deposition of extracellular calcium in Saos-2 cells cultured without mineralization stimulators. The combined formulations of permeable fractions of digested CaCt, LA, D, and T demonstrated the capacity to enhance the proliferation of Saos-2 cells. In Saos-2 cells, D, D1:1:1, and LA showed no discernible impact on intracellular calcium accumulation, whereas T and T1:1:1 reduced the calcium deposits. Additionally, mRNA transcripts and alkaline phosphatase (ALP) activity levels in Saos-2 cells cultured without mineralization induction were unaffected by the analyzed products. An examination of the products revealed no discernible effect on ALP activity or mRNA expression during Saos-2 cell differentiation. Our findings suggest that tempeh, daidzein, and L. acidophilus did not positively impact cellular calcium deposition in Saos-2 cells. However, tempeh, daidzein and its combination, and L. acidophilus might enhance the process of osteogenic differentiation in Saos-2 cells. Nevertheless, this study did not identify any synergistic impact on calcium deposition and the process of osteogenic differentiation in Saos-2 cells of isoflavones and probiotics.

Unveiling the Osteogenic Potential of Tetracyclines: A Comparative Study in Human Mesenchymal Stem Cells

Tetracyclines (TCs) are a class of broad-spectrum antibiotics with diverse pharmacotherapeutic properties due to their various functional groups being attached to a common core structure. Beyond their antibacterial activity, TCs trigger pleiotropic effects on eukaryotic cells, including anti-inflammatory and potentially osteogenic capabilities. Consequently, TCs hold promise for repurposing in various clinical applications, including bone-related conditions. This study presents the first comprehensive comparison of the in vitro osteogenic potential of four TCs-tetracycline, doxycycline, minocycline, and sarecycline, within human mesenchymal stem cells. Cultures were characterized for metabolic activity, cell morphology and cytoskeleton organization, osteogenic gene expression, alkaline phosphatase (ALP) activity, and the activation of relevant signaling pathways. TCs stimulated actin remodeling processes, inducing morphological shifts consistent with osteogenic differentiation. Osteogenic gene expression and ALP activity supported the osteoinduction by TCs, demonstrating significant increases in ALP levels and the upregulation of RUNX2, SP7, and SPARC genes. Minocycline and sarecycline exhibited the most potent osteogenic induction, comparable to conventional osteogenic inducers. Signaling pathway analysis revealed that tetracycline and doxycycline activate the Wnt pathway, while minocycline and sarecycline upregulated Hedgehog signaling. Overall, the present findings suggest that TCs promote osteogenic differentiation through distinct pathways, making them promising candidates for targeted therapy in specific bone-related disorders.

Host defense peptides combined with MTA extract increase the repair in dental pulp cells: in vitro and ex vivo study

Host Defense Peptides (HDPs) have, in previous studies, been demonstrating antimicrobial, anti-inflammatory, and immunomodulatory capacity, important factors in the repair process. Knowing these characteristics, this article aims to evaluate the potential of HDPs IDR1018 and DJK-6 associated with MTA extract in the repair process of human pulp cells. Antibacterial activity of HDPs, MTA and HDPs combined with MTA in Streptococcus mutans planktonic bacteria and antibiofilm activity was evaluated. Cell toxicity was assayed with MTT and cell morphology was observed by scanning electron microscopy (SEM). Proliferation and migration of pulp cells were evaluated by trypan blue and wound healing assay. Inflammatory and mineralization related genes were evaluated by qPCR (IL-6, TNFRSF, DSPP, TGF-β). Alkaline phosphatase, phosphate quantification and alizarin red staining were also verified. The assays were performed in technical and biological triplicate (n = 9). Results were submitted for the calculation of the mean and standard deviation. Then, normality verification by Kolmogorov Smirnov test, analyzing one-way ANOVA. Analyses were considered at a 95% significance level, with a p-value < 0.05. Our study demonstrated that HDPs combined with MTA were able to reduce biofilms performed in 24 h and biofilm performed over 7 days S. mutans biofilm (p < 0.05). IDR1018 and MTA, as well as their combination, down-regulated IL-6 expression (p < 0.05). Tested materials were not cytotoxic to pulp cells. IDR1018 induced high cell proliferation and combined with MTA induced high cellular migration rates in 48 h (p < 0.05). Furthermore, the combination of IDR1018 and MTA also induced high expression levels of DSPP, ALP activity, and the production of calcification nodules. So, IDR-1018 and its combination with MTA could assist in pulp-dentine complex repair process in vitro.

Simultaneous Labeling of Adipogenic and Osteogenic Differentiating Stem Cells for Live Confocal Analysis

Adipocytes and osteoblasts derive from a common mesenchymal progenitor present in a range of connective tissues. Differentiation of the progenitors toward the two cell lineages can be induced in vitro through well-established protocols, and leads to the appearance of lipid-laden adipocytes and osteoblasts embedded in a mineralized matrix. The formation of these two lineages in cell cultures can be monitored using lipophilic dyes such as Oil Red O and substances binding to mineral deposits such as Alizarin Red S, respectively. However, these common staining techniques require cell fixation and are thus incompatible with live analyses. Recently, alternative approaches using vital stains have allowed the dual visualization and fluorescence imaging of adipogenic and osteogenic lineages in live cultures. Here we present the concomitant analysis of cultures containing adipogenic and osteogenic cell types using live staining, combining LipidTox Red and tetracycline with NucRed nuclear counterstain for confocal imaging. This approach can be applied to visualize the kinetics and 3D structure of differentiating mesenchymal cultures over time and highlights the interaction of adipose and mineralized compartments associated with bone marrow stroma.

Stage-Dependent Regulation of Dental Pulp Stem Cell Odontogenic Differentiation by Transforming Growth Factor-β1

Transforming growth factor-β1 (TGF-β1) is an important multifunctional cytokine with dual effects on stem cell differentiation. However, the role of TGF-β1 on odontogenic differentiation of dental pulp stem cells (DPSCs) remains to be entirely elucidated. In the present study, we initially investigated the effect of TGF-β1 at a range of concentrations (0.1-5 ng/mL) on the proliferation, cell cycle, and apoptosis of DPSCs. Subsequently, to determine the effect of TGF-β1 on odontogenic differentiation, alkaline phosphatase (ALP) activity and Alizarin Red S (ARS) staining assays at different concentrations and time points were performed. Quantitative real-time polymerase chain reaction (qRT-PCR) and Western blot analysis were used to determine the levels of odonto-/osteo-genic differentiation-related gene and protein expression, respectively. For in vivo studies, newly formed tissue was assessed by Masson's trichrome and von Kossa staining. Data indicated that TGF-β1 inhibited DPSCs proliferation in a concentration-and time-dependent manner (p < 0.05) and induced cell cycle arrest but did not affect apoptosis. ALP activity was enhanced, while ARS reduced gradually with increasing TGF-β1 concentrations, accompanied by increased expression of early marker genes of odonto-/osteo-genic differentiation and decreased expression of late-stage mineralization marker genes (p < 0.05). ALP expression was elevated in the TGF-β1-treatment group until 14 days, and the intensity of ARS staining was attenuated at days 14 and 21 (p < 0.05). Compared with the control group, abundant collagen but no mineralized tissues were observed in the TGF-β1-treatment group in vivo. Overall, these findings indicate that TGF-β1 promotes odontogenic differentiation of DPSCs at early-stage while inhibiting later-stage mineralization processes.

99mTc-polyphosphonate labelling - Enhancement of a novel method for the quantification of osteogenic differentiation of MSCs in vitro

Bone tissue engineering is a fast-growing field in regenerative medicine. Consequently, there is a high demand for new, fast and reliable methods to track and quantify the osteogenic differentiation of cells. Recently, a novel method was published to non-destructively quantify the hydroxyapatite content of monolayer and 3-dimensional mesenchymal stem cell cultures using the ability of ^99mTechnetium-methylene diphosphonate (MDP), a well-established tracer in clinical nuclear medicine, to bind to newly synthesized hydroxyapatite. In the present study, two other commonly used ^99mTechnetium tracers, 2,3-dicarboxypropane-1,1-diphosphonate (DPD) and hydroxydiphosphonate (HDP), were evaluated to see if they could also be used for the same purpose. Furthermore, we investigated if labelling at various timepoints influenced the effectiveness of the labelling. The results were analysed using one-factor ANOVA followed by Bonferroni post-hoc testing. This revealed a highly significant difference between the three osteogenic groups at each timepoint compared to their corresponding negative controls. However, there was no statistically significant difference between the three different tracers (MDP, DPD, HDP) in the osteogenic groups. Therefore all three tracers are of similar value when quantifying the extracellular hydroxylapatite content in osteogenic stem cells cultures.

In vitro Exposure to Inflammatory Mediators Affects the Differentiation of Mesenchymal Progenitors

The increasing prevalence of joint disease, and in particular osteoarthritis (OA), calls for novel treatment strategies to prevent disease progression in addition to existing approaches focusing mainly on the relief of pain symptoms. The inherent properties of mesenchymal stem cells (MSCs) make them an attractive candidate for novel tissue repair strategies, as these progenitors have the potential to differentiate into chondrocytes needed to replace degraded cartilage and can exert a modulating effect on the inflammatory environment of the diseased joint. However, the inflammatory environment of the joint may affect the ability of these cells to functionally integrate into the host tissue and exert beneficial effects, as hinted by a lack of success seen in clinical trials. Identification of factors and cell signalling pathways that influence MSC function is therefore critical for ensuring their success in the clinic, and here the effects of inflammatory mediators on bone marrow-derived MSCs were evaluated. Human MSCs were cultured in the presence of inflammatory mediators typically associated with OA pathology (IL-1β, IL-8, IL-10). While exposure to these factors did not produce marked effects on MSC proliferation, changes were observed when the mediators were added under differentiating conditions. Results collected over 21 days showed that exposure to IL-1β significantly affected the differentiation response of these cells exposed to chondrogenic and osteogenic conditions, with gene expression analysis indicating changes in MAPK, Wnt and TLR signalling pathways, alongside an increased expression of pro-inflammatory cytokines and cartilage degrading enzymes. These results highlight the value of MSCs as a preclinical model to study OA and provide a basis to define the impact of factors driving OA pathology on the therapeutic potential of MSCs for novel OA treatments.

Models and Techniques to Study Aortic Valve Calcification in Vitro, ex Vivo and in Vivo. An Overview

Aortic valve stenosis secondary to aortic valve calcification is the most common valve disease in the Western world. Calcification is a result of pathological proliferation and osteogenic differentiation of resident valve interstitial cells. To develop non-surgical treatments, the molecular and cellular mechanisms of pathological calcification must be revealed. In the current overview, we present methods for evaluation of calcification in different ex vivo, in vitro and in vivo situations including imaging in patients. The latter include echocardiography, scanning with computed tomography and magnetic resonance imaging. Particular emphasis is on translational studies of calcific aortic valve stenosis with a special focus on cell culture using human primary cell cultures. Such models are widely used and suitable for screening of drugs against calcification. Animal models are presented, but there is no animal model that faithfully mimics human calcific aortic valve disease. A model of experimentally induced calcification in whole porcine aortic valve leaflets ex vivo is also included. Finally, miscellaneous methods and aspects of aortic valve calcification, such as, for instance, biomarkers are presented.

A critical review of in vitro research methodologies used to study mineralization in human dental pulp cell cultures

Background

The pulp contains a resident population of stem cells which can be stimulated to differentiate in order to repair the tooth by generating a mineralized extracellular matrix. Over recent decades there has been considerable interest in utilizing in vitro cell culture models to study dentinogenesis, with the aim of developing regenerative endodontic procedures, particularly where some vital pulp tissue remains.

Objectives

The purpose of this review is to provide a structured oversight of in vitro research methodologies which have been used to study human pulp mineralization processes.

Method

The literature was screened in the PubMed database up to March 2021 to identify manuscripts reporting the use of human dental pulp cells to study mineralization. The dataset identified 343 publications initially which were further screened and consequently 166 studies were identified and it was methodologically mined for information on: i) study purpose, ii) source and characterization of cells, iii) mineralizing supplements and concentrations, and iv) assays and markers used to characterize mineralization and differentiation, and the data was used to write this narrative review.

Results

Most published studies aimed at characterizing new biological stimulants for mineralization as well as determining the effect of scaffolds and dental (bio)materials. In general, pulp cells were isolated by enzymatic digestion, although the pulp explant technique was also common. For enzymatic digestion, a range of enzymes and concentrations were utilized, although collagenase type I and dispase were the most frequent. Isolated cells were not routinely characterized using either fluorescence‐activated cell sorting (FACS) and magnetic‐activated cell sorting (MACS) approaches and there was little consistency in terming cultures as dental pulp cells or dental pulp stem cells. A combination of media supplements, at a range of concentrations, of dexamethasone, ascorbic acid and beta‐glycerophosphate, were frequently applied as the basis for the experimental conditions. Alizarin Red S (ARS) staining was the method of choice for assessment of mineralization at 21‐days. Alkaline phosphatase assay was relatively frequently applied, solely or in combination with ARS staining. Further assessment of differentiation status was performed using transcript or protein markers, with dentine sialophosphoprotein (DSPP), osteocalcin and dentine matrix protein‐1 (DMP ‐1), the most frequent.

Discussion

While this review highlights variability among experimental approaches, it does however identify a consensus experimental approach.

Conclusion

Standardization of experimental conditions and sustained research will significantly benefit endodontic patient outcomes in the future.

Platelet-rich fibrin-loaded PCL/chitosan core-shell fibers scaffold for enhanced osteogenic differentiation of mesenchymal stem cells

Here, we fabricated the platelet-rich fibrin (PRF)-loaded PCL/chitosan (PCL/CS-PRF) core-shell nanofibrous scaffold through a coaxial electrospinning method. Our goal was to evaluate the effect of CS-RPF in the core layer of the nanofibrous on the osteogenic differentiation of human mesenchymal stem cells (HMSCs). The elastic modulus of PCL/CS-PRF core-shell scaffold (44 MPa) was about 1.5-fold of PCL/CS scaffold (25 MPa). The specific surface area of the scaffolds increased from 9.98 m²/g for PCL/CS scaffold to 16.66 m²/g for the PCL/CS-PRF core-shell nanofibrous scaffold. Moreover, the release rate of PRF from PCL/CS-PRF nanofibrous scaffold was measured to be 24.50% after 10 days which showed slow and sustained release of PRF from the nanofibrous. The formation of Ca-P on the surface of scaffold immersed in simulated body fluid solution indicated the suitable osteoconductivity of PCL/CS-PRF core-shell nanofibrous scaffold. Also, the value of ALP activity and calcium deposited on the surface of PCL/CS-PRF core-shell nanofibrous scaffold were 81.97 U/L and 40.33 μg/scaffold, respectively after 14 days, which confirmed the significantly higher amounts of ALP and calcium deposition on the scaffold containing PRF compared to PCL/CS scaffold. Due to higher hydrophilicity and porosity of PCL/CS-PRF core-shell nanofibrous scaffold compared to PCL/CS scaffold, a better bone cell growth on surface of PCL/CS-PRF scaffold was observed. The Alizarin red-positive area was significantly higher on PCL/CS-PRF scaffold compared to PCL/CS scaffold, indicating more calcium deposition and osteogenic differentiation of HMSCs in the presence of PRF. Our findings demonstrate that PCL/CS-PRF core-shell scaffolds can provide a strong construct with improved osteogenic for bone tissue engineering applications.

Fisetin Inhibits Osteogenic Differentiation of Mesenchymal Stem Cells via the Inhibition of YAP

Mesenchymal stem cells (MSCs) are self-renewal and capable of differentiating to various functional cell types, including osteocytes, adipocytes, myoblasts, and chondrocytes. They are, therefore, regarded as a potential source for stem cell therapy. Fisetin is a bioactive flavonoid known as an active antioxidant molecule that has been reported to inhibit cell growth in various cell types. Fisetin was shown to play a role in regulating osteogenic differentiation in animal-derived MSCs; however, its molecular mechanism is not well understood. We, therefore, studied the effect of fisetin on the biological properties of human MSCs derived from chorion tissue and its role in human osteogenesis using MSCs and osteoblast-like cells (SaOs-2) as a model. We found that fisetin inhibited proliferation, migration, and osteogenic differentiation of MSCs as well as human SaOs-2 cells. Fisetin could reduce Yes-associated protein (YAP) activity, which results in downregulation of osteogenic genes and upregulation of fibroblast genes. Further analysis using molecular docking and molecular dynamics simulations suggests that fisetin occupied the hydrophobic TEAD pocket preventing YAP from associating with TEA domain (TEAD). This finding supports the potential application of flavonoids like fisetin as a protein–protein interaction disruptor and also suggesting an implication of fisetin in regulating human osteogenesis.

A specific aggregation-induced emission-conjugated polymer enables visual monitoring of osteogenic differentiation

Osteogenic differentiation is the basis of bone growth and repair related to many diseases, in which evaluating the degree and ability of osteogenic transformation is quite important and highly desirable. However, fixing or stopping the growth of cells is required for conventional methods to monitor osteogenic differentiation, which cannot realize the full investigation of the dynamic process. Herein, a new anion conjugated polymer featuring aggregation-induced emission (AIE) characteristics is developed with excellent solubility for in-situ monitoring the process of osteogenic differentiation. This novel polymer can bind with osteogenic differentiated cells, and the intracellular fluorescence increases gradually with the enhancement of osteogenic differentiation. Moreover, it possesses good biosafety with negligible effect on cell activity and osteogenic differentiation, which cannot be realized by the typical method of Alizarin Red S staining. Further study shows that the polymer crosses the cell membrane through endocytosis and enriches in lysosomes, whereas no obvious fluorescence is detected with other cells, including non-differentiated osteoblast cells, under the same conditions, demonstrating the high selectivity. This is the first fluorescent probe with excellent specificity to realize real-time observation of the process of osteogenic differentiation. Therefore, PTB-EDTA shows great promise in the study of osteogenic differentiation and related applications.

18F- based Quantification of the Osteogenic Potential of hMSCs

In bone tissue engineering, there is a constant need to design new methods for promoting in vitro osteogenic differentiation. Consequently, there is a strong demand for fast, effective and reliable methods to track and quantify osteogenesis in vitro. In this study, we used the radiopharmacon fluorine-18 (¹⁸F) to evaluate the amount of hydroxylapatite produced by mesenchymal stem cells (MSCs) in a monolayer cell culture in vitro. The hydroxylapatite bound tracer was evaluated using µ-positron emission tomography (µ-PET) scanning and activimeter analysis. It was therefore possible to determine the amount of synthesized mineral and thus to conclude the osteogenic potential of the cells. A Student's t-test revealed a highly significant difference regarding tracer uptake between the osteogenic group and the corresponding control group (µ-PET p = 0.043; activimeter analysis p = 0.012). This tracer uptake showed a highly significant correlation with the gold standard of quantitative Alizarin Red staining (ARS) (r² = 0.86) as well as with the absolute calcium content detected by inductively coupled plasma mass spectrometry (r² = 0.81). The results showed that ¹⁸F labeling is a novel method to prove and quantify hydroxyapatite content in MSC monolayer cultures. The mineral layer remains intact for further analysis. This non-destructive in vitro method can be used to rapidly investigate bone tissue engineering strategies in terms of hydroxylapatite production, and could therefore accelerate the process of implementing new strategies in clinical practice.

Aspiration-assisted bioprinting of the osteochondral interface

Osteochondral defects contain damage to both the articular cartilage and underlying subchon- dral bone, which remains a significant challenge in orthopedic surgery. Layered structure of bone, cartilage and the bone-cartilage interface must be taken into account in the case of biofabrication of the osteochondral (OC) interface. In this study, a dual layered OC interface was bioprinted using a newly developed aspiration-assisted bioprinting (AAB) technique, which has been the first time that scaffold-free bioprinting was applied to OC interface engineering. Tissue spheroids, made of human adipose-derived stem cells (ADSCs), were differentiated in three dimensions (3D) into chondrogenic and osteogenic spheroids, which were confirmed by immunostaining and histology qualitatively, and biochemistry assays and gene expression, quantitatively. Remarkably, the OC interface was bioprinted by accurate positioning of a layer of osteogenic spheroids onto a sacrificial alginate support followed by another layer of chondrogenic spheroids overlaid by the same support. Spheroids in individual zones fused and the maintenance of phenotypes in both zones confirmed the successful biofabrication of the histomorphologically-relevant OC interface. The biofabrication of OC tissue model without the use of polymeric scaffolds unveils great potential not only in regenerative medicine but also in drug testing and disease modeling for osteoarthritis.

Inhibited Maternal Bone Resorption Suppress Fetal Rat Bone Development During Pregnancy

Objective

To determine the relationship between maternal bone resorption and bone development in fetuses.

Methods

Female SD rats were injected with either fluorescent calcium indicator calcein alone or together with tetracycline 1 week before pregnancy, followed by fluorescence detection in fetal tibias 21 days post-treatment. Alendronate was subsequently administered to pregnant rats to inhibit maternal bone resorption, while maternal bone turnover and fetal bone development were both examined.

Results

The maternal fluorescent labeled calcium before pregnancy was found in the fetal tibia. This indicated that the calcium of maternal bones may be released into the maternal circulation through high bone resorption during pregnancy, thereby participating in the fetal bone development. Bone histomorphometry and serum biomarker results showed that Alendronate significantly inhibited maternal bone resorption in pregnant rats when compared to normal pregnant rats. Moreover, the body weight, bone mass, and bone length of the fetuses in the Alendronate group were significantly decreased; while no apparent abnormality in placental morphology was observed. The above results implied that when maternal bone resorption is suppressed, the development of the fetal bone shall also be suppressed.

Conclusion

Calcium in the maternal bone is released into the maternal circulation through bone resorption during pregnancy which represents an important material source in fetal bone development. Therefore, high bone turnover during pregnancy is essential for mammalian embryonic bone development.

Role of nanoparticles in osteogenic differentiation of bone marrow mesenchymal stem cells

The present study aimed to investigate the osteoinductive potentiality of some selected nanostructures; Hydroxyapatite (HA-NPs), Gold (Au-NPs), Chitosan (C-NPs), Gold/hydroxyapatite (Au/HA-NPs) and Chitosan/hydroxyapatite (CH-NPs) on bone marrow- derived mesenchymal stem cells (BM-MSCs). These nanostructures were characterized using transmission electron microscope and Zetasizer. MSCs were isolated from bone marrow of rat femur bones and their identity was documented by morphology, flow cytometry and multi-potency capacity. The influence of the selected nanostructures on the viability, osteogenic differentiation and subsequent matrix mineralization of BM-MSCs was determined by MTT assay, molecular genetic analysis and alizarin red S staining, respectively. MTT analysis revealed insignificant toxicity of the tested nanostructures on BM-MSCs at concentrations ranged from 2 to 25 µg/ml over 48 h and 72 h incubation period. Notably, the tested nanostructures potentiate the osteogenic differentiation of BM-MSCs as evidenced by a prominent over-expression of runt-related transcription factor 2 (Runx-2) and bone morphogenetic protein 2 (BMP-2) genes after 7 days incubation. Moreover, the tested nanostructures induced matrix mineralization of BM-MSCs after 21 days as manifested by the formation of calcium nodules stained with alizarin red S. Conclusively, these data provide a compelling evidence for the functionality of the studied nanostructures as osteoinductive materials motivating the differentiation of BM-MSCs into osteoblasts with the most prominent effect observed with Au-NPs and Au/HA-NPs, followed by CH-NPs.

Spectroscopic Methods Used in Implant Material Studies

It is recognized that interactions between most materials are governed by their surface properties and manifest themselves at the interface formed between them. To gain more insight into this thin layer, several methods have been deployed. Among them, spectroscopic methods have been thoroughly evaluated. Due to their exceptional sensitivity, data acquisition speed, and broad material tolerance they have been proven to be invaluable tools for surface analysis, used by scientists in many fields, for example, implant studies. Today, in modern medicine the use of implants is considered standard practice. The past two decades of constant development has established the importance of implants in dentistry, orthopedics, as well as extended their applications to other areas such as aesthetic medicine. Fundamental to the success of implants is the knowledge of the biological processes involved in interactions between an implant and its host tissue, which are directly connected to the type of implant material and its surface properties. This review aims to demonstrate the broad applications of spectroscopic methods in implant material studies, particularly discussing hard implants, surface composition studies, and surface-cell interactions.

Live Simultaneous Monitoring of Mineral Deposition and Lipid Accumulation in Differentiating Stem Cells

Mesenchymal stem cells (MSCs) are progenitors for bone-forming osteoblasts and lipid-storing adipocytes, two major lineages co-existing in bone marrow. When isolated in vitro, these stem cells recapitulate osteoblast or adipocyte formation if treated with specialised media, modelling how these lineages interact in vivo. Osteogenic differentiation is characterised by mineral deposits accumulating in the extracellular matrix, typically assessed using histological techniques. Adipogenesis occurs with accumulation of intracellular lipids that can be routinely visualised by Oil Red O staining. In both cases, staining requires cell fixation and is thus limited to end-point assessments. Here, a vital staining approach was developed to simultaneously detect mineral deposits and lipid droplets in differentiating cultures. Stem cells induced to differentiate produced mixed cultures containing adipocytes and bone-like nodules, and after two weeks live cultures were incubated with tetracycline hydrochloride and Bodipy to label mineral- and lipid-containing structures, respectively. Fluorescence microscopy showed the simultaneous visualisation of mineralised areas and lipid-filled adipocytes in live cultures. Combined with the nuclear stain Hoechst 33258, this approach further enabled live confocal imaging of adipogenic cells interspersed within the mineralised matrix. This multiplex labelling was repeated at subsequent time-points, demonstrating the potential of this new approach for the real-time high-precision imaging of live stem cells.

Magnetically Assisted Control of Stem Cells Applied in 2D, 3D and In Situ Models of Cell Migration

The success of cell therapy approaches is greatly dependent on the ability to precisely deliver and monitor transplanted stem cell grafts at treated sites. Iron oxide particles, traditionally used in vivo for magnetic resonance imaging (MRI), have been shown to also represent a safe and efficient in vitro labelling agent for mesenchymal stem cells (MSCs). Here, stem cells were labelled with magnetic particles, and their resulting response to magnetic forces was studied using 2D and 3D models. Labelled cells exhibited magnetic responsiveness, which promoted localised retention and patterned cell seeding when exposed to magnet arrangements in vitro. Directed migration was observed in 2D culture when adherent cells were exposed to a magnetic field, and also when cells were seeded into a 3D gel. Finally, a model of cell injection into the rodent leg was used to test the enhanced localised retention of labelled stem cells when applying magnetic forces, using whole body imaging to confirm the potential use of magnetic particles in strategies seeking to better control cell distribution for in vivo cell delivery.

Flame-Spheroidized Phosphate-Based Glass Particles with Improved Characteristics for Applications in Mesenchymal Stem Cell Culture Therapy and Tissue Engineering

The chemical formulation of phosphate-based glasses (PBGs) can be tailored to fit particular end applications such as bone tissue engineering. While most reports to date have evaluated the effect of PBG chemical formulation on bone cells, this study specifically explored the manufacturing process, the changes in physical and chemical properties of PBG particles after flame spheroidization, and subsequent effects on human mesenchymal stem cells (hMSCs), a prime cell type for regenerative medicine applications. Flame spheroidization involves feeding irregular PBG particles (microparticles, MP) into a hot flame, causing them to melt and mold into solid spherical PBG particles (microspheres, MS). The laser diffraction analysis showed an increase in the volume-weighted mean diameter of particles from 48 to 139 μm after spheroidization and also revealed changes in the chemical composition of smaller MS (< 45 μm in size), whereas MS in other size ranges did not show significantly different chemical composition compared to MP. Additionally, some air bubbles were entrapped inside particles during spheroidization, causing a 2% drop in relative density of MS. However, the packing density of MS was 30% higher than that of MP. Culture of hMSCs on the particles showed significant improvement in cell spreading on MS compared to that on MP and nearly 2 times higher cell metabolic activity after 7 days of culture, suggesting that MS provided a more favorable support and geometry for hMSC attachment and growth for tissue engineering.

Porous calcium phosphate glass microspheres for orthobiologic applications

Orthobiologics is a rapidly advancing field utilising cell-based therapies and biomaterials to enable the body to repair and regenerate musculoskeletal tissues. This paper reports on a cost-effective flame spheroidisation process for production of novel porous glass microspheres from calcium phosphate-based glasses to encapsulate and deliver stem cells. Careful selection of the glass and pore-forming agent, along with a manufacturing method with the required processing window enabled the production of porous glass microspheres via a single-stage manufacturing process. The morphological and physical characterisation revealed porous microspheres with tailored surface and interconnected porosity (up to 76 ± 5%) with average pore size of 55 ± 8 µm and surface areas ranging from 0.34 to 0.9 m² g^-1. Furthermore, simple alteration of the processing parameters produced microspheres with alternate unique morphologies, such as with solid cores and surface porosity only. The tuneable porosity enabled control over their surface area, degradation profiles and hence ion release rates. Furthermore, cytocompatibility of the microspheres was assessed using human mesenchymal stem cells via direct cell culture experiments and analysis confirmed that they had migrated to within the centre of the microspheres. The novel microspheres developed have huge potential for tissue engineering and regenerative medicine applications.

STATEMENT OF SIGNIFICANCE

This manuscript highlights a simple cost-effective one-step process for manufacturing porous calcium phosphate-based glass microspheres with varying control over surface pores and fully interconnected porosity via a flame spheroidisation process. Moreover, a simple alteration of the processing parameters can produce microspheres which have a solid core with surface pores only. The tuneable porosity enabled control over their surface area, degradation profiles and hence ion release rates. The paper also shows that stem cells not only attach and proliferate but more importantly migrate to within the core of the porous microspheres, highlighting applications for bone tissue engineering and regenerative medicine.