The sliding clamp of DNA polymerase III holoenzyme encircles DNA

From Processivity to Genome Maintenance: The Many Roles of Sliding Clamps

Sliding clamps play a pivotal role in the process of replication by increasing the processivity of the replicative polymerase. They also serve as an interacting platform for a plethora of other proteins, which have an important role in other DNA metabolic processes, including DNA repair. In other words, clamps have evolved, as has been correctly referred to, into a mobile "tool-belt" on the DNA, and provide a platform for several proteins that are involved in maintaining genome integrity. Because of the central role played by the sliding clamp in various processes, its study becomes essential and relevant in understanding these processes and exploring the protein as an important drug target. In this review, we provide an updated report on the functioning, interactions, and moonlighting roles of the sliding clamps in various organisms and its utilization as a drug target.

Searching for Low Probability Opening Events in a DNA Sliding Clamp

The β subunit of E. coli DNA polymererase III is a DNA sliding clamp associated with increasing the processivity of DNA synthesis. In its free form, it is a circular homodimer structure that can accomodate double-stranded DNA in a nonspecific manner. An open state of the clamp must be accessible before loading the DNA. The opening mechanism is still a matter of debate, as is the effect of bound DNA on opening/closing kinetics. We use a combination of atomistic, coarse-grained, and enhanced sampling strategies in both explicit and implicit solvents to identify opening events in the sliding clamp. Such simulations of large nucleic acid and their complexes are becoming available and are being driven by improvements in force fields and the creation of faster computers. Different models support alternative opening mechanisms, either through an in-plane or out-of-plane opening event. We further note some of the current limitations, despite advances, in modeling these highly charged systems with implicit solvent.

Mycobacterium tuberculosis Endonuclease VIII 2 (Nei2) forms a prereplicative BER complex with DnaN: Identification, characterization, and disruption of complex formation

Mycobacterium tuberculosis Nei2 (Rv3297) is a BER glycosylase that removes oxidized base lesions from ssDNA and replication fork-mimicking substrates. We show that Endonuclease VIII 2 (Nei2) forms a BER complex with the β-clamp (DnaN, Rv0002) with a K_D of 170 nM. The Nei2-β-clamp interactions enhance Nei2's activities up to several folds. SEC analysis shows that one molecule of Nei2 binds to a single β-clamp dimer. Nei2 interacts with subsites I and II of the β-clamp via a noncanonical ²²³ QGCRRCGTLIAY²³⁹ Clamp Interacting Protein (CIP) motif in the C-terminal zinc-finger domain, which was previously shown by us to be dispensable for intrinsic Nei2 activity. The 12-mer peptide alone exhibited a K_D of 10.28 nM, suggesting that the motif is a key mediator of Nei2-β-clamp interactions. Finally, we identified inhibitors of Nei2-β-clamp interactions using rational methods, in vitro disruption, and SPR assays after querying a database of natural products. We found that Tubulosine, Fumitremorgin C, Toyocamycin, and Aleuritic acid exhibit IC₅₀ values of 94.47, 83.49, 109.7, and 71.49 µM, respectively. They act by disrupting Nei2-β-clamp interactions and do not affect intrinsic Nei2 activity. Among other things, the present study gives insights into the role of Nei2 in bacterial prereplicative BER.

Evolutionary advantage of a dissociative search mechanism in DNA mismatch repair

Protein complexes involved in DNA mismatch repair diffuse along dsDNA as sliding clamps in order to locate a hemimethylated incision site. They have been observed to use a dissociative mechanism, in which two proteins, while continuously remaining attached to the DNA, sometimes associate into a single complex sliding on the DNA and sometimes dissociate into two independently sliding proteins. Here, we study the probability that these complexes locate a given target site via a semi-analytic, Monte Carlo calculation that tracks the association and dissociation of the sliding complexes. We compare such probabilities to those obtained using a nondissociative diffusive scan in the space of physically realistic diffusion constants, hemimethylated site distances, and total search times to determine the regions in which dissociative searching is more or less efficient than nondissociative searching. We conclude that the dissociative search mechanism is advantageous in the majority of the physically realistic parameter space, suggesting that the dissociative search mechanism confers an evolutionary advantage.

In vivo demonstration of enhanced binding between β-clamp and DnaE of pol III bearing consensus i-CBM

BACKGROUND

Among several key protein-protein and protein-DNA interactions within the replisome, the interaction between β-clamp and the DNA polymerase (Pol) III is of crucial importance. This interaction is mediated by a five or six-residue conserved sequence of the DnaE subunit of Pol III, referred to as the Clamp Binding Motif (CBM). In E. coli, DnaE contains two CBMs designated as e-CBM and i-CBM. A consensus sequence (QL[S/D]LF) for the CBMs has previously been proposed and studies involving mutagenesis of both the CBMs have evaluated their protein-binding properties. Surface Plasmon Resonance has been used to show that replacing i-CBM in DnaE with the consensus sequence enhances its binding to β-clamp 120-fold.

OBJECTIVE

The current study was aimed to evaluate in vivo interaction between DnaE bearing the consensus i-CBM and β-clamp.

METHOD

The C-terminal 405 residues of DnaE, bearing either the consensus i-CBM or the WT i-CBM, with β-clamp were co-expressed in E. coli followed by co-purification of the protein complexes. The interaction was assessed by the ability of the co-expressed proteins to form stable complexes during both affinity and gel filtration chromatography.

RESULT

The interaction of β-clamp with DnaEΔ755M containing the consensus i-CBM was found to be more stable than with WT DnaEΔ755, consistent with the in vitro data previously reported.

CONCLUSION

The presence of the pieces of sheared DNA generated during sonication promote the interaction of DnaEΔ755M with β-clamp by binding the OB-fold of DnaEΔ755M and β-clamp and serves as a bridge between them.

Native ESI Mass Spectrometry Can Help to Avoid Wrong Interpretations from Isothermal Titration Calorimetry in Difficult Situations

We studied by native ESI-MS the binding of various DNA-polymerase-derived peptides onto DNA-polymerase processivity rings from Escherichia coli, Pseudomonas aeruginosa, and Mycobacterium tuberculosis. These homodimeric rings present two equivalent specific binding sites, which leads to successive formation during a titration experiment of singly- and doubly occupied rings. By using the ESI-MS free-ring spectrum as a ruler, we derived by robust linear regression the fractions of the different ring species at each step of a titration experiment. These results led to accurate K_d values (from 0.03 to 0.5 μM) along with the probability of peptide loss due to gas phase dissociation (GPD). We show that this good quality is due to the increased information content of a titration experiment with a homodimer. Isothermal titration calorimetry (ITC) led with the same binding model to K_d(ITC) values systematically higher than their ESI-MS counterparts and, often, to poor fit of the ITC curves. A processing with two competing modes of binding on the same site requiring determination of two (K_d, ΔH) pairs greatly improved the fits and yielded a second K_d(ITC) close to K_d(ESI-MS). The striking features are: (1) ITC detected a minor binding mode (~20%) of 'low-affinity' that did not appear with ESI-MS; (2) the simplest processing of ITC data with only one (K_d, ΔH) pair led wrongly to the Kd of the low-affinity binding mode but to the ΔH of the high-affinity binding mode. Analogous misleading results might well exist in published data based on ITC experiments. Graphical Abstract ᅟ.

Mycobacterium tuberculosis class II apurinic/apyrimidinic-endonuclease/3'-5' exonuclease III exhibits DNA regulated modes of interaction with the sliding DNA β-clamp

The class-II AP-endonuclease (XthA) acts on abasic sites of damaged DNA in bacterial base excision repair. We identified that the sliding DNA β-clamp forms in vivo and in vitro complexes with XthA in Mycobacterium tuberculosis. A novel 239 QLRFPKK245 motif in the DNA-binding domain of XthA was found to be important for the interactions. Likewise, the peptide binding-groove (PBG) and the C-terminal of β-clamp located on different domains interact with XthA. The β-clamp-XthA complex can be disrupted by clamp binding peptides and also by a specific bacterial clamp inhibitor that binds at the PBG. We also identified that β-clamp stimulates the activities of XthA primarily by increasing its affinity for the substrate and its processivity. Additionally, loading of the β-clamp onto DNA is required for activity stimulation. A reduction in XthA activity stimulation was observed in the presence of β-clamp binding peptides supporting that direct interactions between the proteins are necessary to cause stimulation. Finally, we found that in the absence of DNA, the PBG located on the second domain of the β-clamp is important for interactions with XthA, while the C-terminal domain predominantly mediates functional interactions in the substrate's presence.

Cyclic peptide inhibitors of the β-sliding clamp in Staphylococcus aureus

Interaction between pairs of Staphylococcus aureus replication proteins was detected in an Escherichia coli based two-hybrid analysis. A reverse two-hybrid system was constructed for selection of compounds that hindered interaction between interacting protein pairs. A number of cyclic peptides, from a library generated by the split intein-mediated circular ligation of peptides and proteins technology, were found to interfere with dimerization of the β-sliding clamp of the replisome. Two 8-mer peptides were analyzed in more detail. Both inhibited DNA replication, led to SOS induction, altered cell morphology and cell death. The peptides were active when added to bacterial cultures indicating that they could traverse the bacterial membrane to find their intracellular target. Peptide specificity was confirmed by overproduction of the putative target (DnaN) which resulted in resistance. The minimum inhibitory concentration was ∼50 μg/ml for S. aureus cells. These compounds may serve as lead candidates for future development into novel classes of antibiotics as well as provide information on the function of the S. aureus replication process.

2'-Deoxyribonucleoside phosphoramidate triphosphate analogues as alternative substrates for E. coli polymerase III

Thermostable bacterial polymerases like Taq, Therminator and Vent exo(-) are able to perform DNA synthesis by using modified DNA precursors, a property that is exploited in several therapeutic and biotechnological applications. Viral polymerases are also known to accept modified substrates, and this has proven crucial in the development of antiviral therapies. However, non-thermostable polymerases of bacterial origin, or engineered variants, that have similar substrate tolerance and could be used for synthetic biology purposes remain to be identified. We have identified the α subunit of Escherichia coli polymerase III (Pol III α) as a bacterial polymerase that is able to recognise and process as substrates several pyrophosphate-modified dATP analogues in place of its natural substrate dATP for template-directed DNA synthesis. A number of dATP analogues featuring a modified pyrophosphate group were able to serve as substrates during enzymatic DNA synthesis by Pol III α. Features such as the presence of potentially chelating chemical groups and the size and spatial flexibility of the chemical structure seem to be of major importance for the modified leaving group to play its role during the enzymatic reaction. In addition, we could establish that if the pyrophosphate group is altered, deoxynucleotide incorporation proceeds with an efficiency varying with the nature of the nucleobase. Our results represent a great step towards the achievement of a system of artificial DNA synthesis hosted by E. coli and involving the use of altered nucleotide precursors for nucleic acid synthesis.

Improved solubility of replication factor C (RFC) Walker A mutants

Protein insolubility often poses a significant problem during purification protocols and in enzyme assays, especially for eukaryotic proteins expressed in a recombinant bacterial system. The limited solubility of replication factor C (RFC), the clamp loader complex from Saccharomyces cerevisiae, has been previously documented. We found that mutant forms of RFC harboring a single point mutation in the Walker A motif were even less soluble than the wild-type complex. The addition of maltose at 0.75 M to the storage and assay buffers greatly increases protein solubility and prevents the complex from falling apart. Our analysis of the clamp loading reaction is dependent on fluorescence-based assays, which are environmentally sensitive. Using wt RFC as a control, we show that the addition of maltose to the reaction buffers does not affect fluorophore responses in the assays or the enzyme activity, indicating that maltose can be used as a buffer additive for further downstream analysis of these mutants.

Centromeric chromatin and the pathway that drives its propagation

The centromere is the locus that directs chromosomal inheritance at cell division. While centromeres in diverse eukaryotes are commonly found at sites of repetitive DNA, their location is epigenetically specified. The histone H3 variant CENP-A is the prime candidate for epigenetically marking the centromere, and recent work has uncovered several additional proteins that play key roles in centromere assembly and maintenance. We describe advances in the identification and characterization of proteins that form the centromere, and focus on recent findings that have advanced our understanding of the assembly of functional centromeric chromatin. This article is part of a Special Issue entitled: Histone chaperones and chromatin assembly.

The endonuclease domain of MutL interacts with the β sliding clamp

Mismatch repair corrects errors that have escaped polymerase proofreading enhancing replication fidelity by at least two orders of magnitude. The β and PCNA sliding clamps increase the polymerase processivity during DNA replication and are important at several stages of mismatch repair. Both MutS and MutL, the two proteins that initiate the mismatch repair response, interact with β. Binding of MutS to β is important to recruit MutS and MutL to foci. Moreover, the endonuclease activity of human and yeast MutLα is stimulated by PCNA. However, the concrete functions of the processivity clamp in the repair steps preceding DNA resynthesis remain obscure. Here, we demonstrate that the C-terminal domain of MutL encompasses a bona fide β-binding motif that mediates a weak, yet specific, interaction between the two proteins. Mutation of this conserved motif correlates with defects in mismatch repair, demonstrating that the direct interaction with β is important for MutL function. The interaction between the C-terminal domain of MutL and β is conserved in both Bacillus subtilis and Escherichia coli, but the repair defects associated with mutation of this β-binding motif are more severe in the former, suggesting that this interaction may have a more prominent role in methyl-independent than methyl-directed mismatch repair systems. Together with previously published data, our work strongly suggests that β may stimulate the endonuclease activity of MutL through its direct interaction with the C-terminal domain of MutL.

The role of interactions between phage and bacterial proteins within the infected cell: a diverse and puzzling interactome

Interactions between bacteriophage proteins and bacterial proteins are important for efficient infection of the host cell. The phage proteins involved in these bacteriophage-host interactions are often produced immediately after infection. A survey of the available set of published bacteriophage-host interactions reveals the targeted host proteins are inhibited, activated or functionally redirected by the phage protein. These interactions protect the bacteriophage from bacterial defence mechanisms or adapt the host-cell metabolism to establish an efficient infection cycle. Regrettably, a large majority of bacteriophage early proteins lack any identified function. Recent research into the antibacterial potential of bacteriophage-host interactions indicates that phage early proteins seem to target a wide variety of processes in the host cell - many of them non-essential. Since a clear understanding of such interactions may become important for regulations involving phage therapy and in biotechnological applications, increased scientific emphasis on the biological elucidation of such proteins is warranted.

Differential binding of Escherichia coli DNA polymerases to the beta-sliding clamp

Escherichia coli strains expressing the mutant beta159-sliding clamp protein (containing both a G66E and a G174A substitution) are temperature sensitive for growth and display altered DNA polymerase (pol) usage. We selected for suppressors of the dnaN159 allele able to grow at 42 degrees C, and identified four intragenic suppressor alleles. One of these alleles (dnaN780) contained only the G66E substitution, while a second (dnaN781) contained only the G174A substitution. Genetic characterization of isogenic E. coli strains expressing these alleles indicated that certain phenotypes were dependent upon only the G174A substitution, while others required both the G66E and G174A substitutions. In order to understand the individual contributions of the G66E and the G174A substitution to the dnaN159 phenotypes, we utilized biochemical approaches to characterize the purified mutant beta159 (G66E and G174A), beta780 (G66E) and beta781 (G174A) clamp proteins. The G66E substitution conferred a more pronounced effect on pol IV replication than it did pol II or pol III, while the G174A substitution conferred a greater effect on pol III and pol IV than it did pol II. Taken together, these findings indicate that pol II, pol III and pol IV interact with distinct, albeit overlapping surfaces of the beta clamp.

Replisome fate upon encountering a leading strand block and clearance from DNA by recombination proteins

Replication forks that collapse upon encountering a leading strand lesion are reactivated by a recombinative repair process called replication restart. Using rolling circle DNA substrates to model replication forks, we examine the fate of the helicase and both DNA polymerases when the leading strand polymerase is blocked. We find that the helicase continues over 0.5 kb but less than 3 kb and that the lagging strand DNA polymerase remains active despite its connection to a stalled leading strand enzyme. Furthermore, the blocked leading strand polymerase remains stably bound to the replication fork, implying that it must be dismantled from DNA in order for replication restart to initiate. Genetic studies have identified at least four gene products required for replication restart, RecF, RecO, RecR, and RecA. We find here that these proteins displace a stalled polymerase at a DNA template lesion. Implications of these results for replication fork collapse and recovery are discussed.

Dissociative Properties of the Proteins within the Bacteriophage T4 Replisome

DNA replication is a highly processive and efficient process that involves the coordination of at least eight proteins to form the replisome in bacteriophage T4. Replication of DNA occurs in the 5' to 3' direction resulting in continuous replication on the leading strand and discontinuous replication on the lagging strand. A key question is how a continuous and discontinuous replication process is coordinated. One solution is to avoid having the completion of one Okazaki fragment to signal the start of the next but instead to have a key step such as priming proceed in parallel to lagging strand replication. Such a mechanism requires protein elements of the replisome to readily dissociate during the replication process. Protein trapping experiments were performed to test for dissociation of the clamp loader and primase from an active replisome in vitro whose template was both a small synthetic DNA minicircle and a larger DNA substrate. The primase, clamp, and clamp loader are found to dissociate from the replisome and are continuously recruited from solution. The effect of varying protein concentrations (dilution) on the size of Okazaki fragments supported the protein trapping results. These findings are in accord with previous results for the accessory proteins but, importantly now, identify the primase as dissociating from an active replisome. The recruitment of the primase from solution during DNA synthesis has also been found for Escherichia coli but not bacteriophage T7. The implications of these results for RNA priming and extension during the repetitive synthesis of Okazaki fragments are discussed.

The coordinated functions of the E. coli MutS and MutL proteins in mismatch repair

The Escherichia coli MutS and MutL proteins have been conserved throughout evolution, although their combined functions in mismatch repair (MMR) are poorly understood. We have used biochemical and genetic studies to ascertain a physiologically relevant mechanism for MMR. The MutS protein functions as a regional lesion sensor. ADP-bound MutS specifically recognizes a mismatch. Repetitive rounds of mismatch-provoked ADP-->ATP exchange results in the loading of multiple MutS hydrolysis-independent sliding clamps onto the adjoining duplex DNA. MutL can only associate with ATP-bound MutS sliding clamps. Interaction of the MutS-MutL sliding clamp complex with MutH triggers ATP binding by MutL that enhances the endonuclease activity of MutH. Additionally, MutL promotes ATP binding-independent turnover of idle MutS sliding clamps. These results support a model of MMR that relies on two dynamic and redundant ATP-regulated molecular switches.

The A20R protein is a stoichiometric component of the processive form of vaccinia virus DNA polymerase

In vitro analysis of the catalytic DNA polymerase encoded by vaccinia virus has demonstrated that it is innately distributive, catalyzing the addition of <10 nucleotides per primer-template binding event in the presence of 8 mM MgCl(2) or 40 mM NaCl (W. F. McDonald and P. Traktman, J. Biol. Chem. 269:31190-31197, 1994). In contrast, cytoplasmic extracts isolated from vaccinia virus-infected cells contain a highly processive form of DNA polymerase, able to catalyze the replication of a 7-kb template per binding event under similar conditions. To study this holoenzyme, we were interested in purifying and characterizing the vaccinia virus processivity factor (VPF). Our previous studies indicated that VPF is expressed early after infection and has a native molecular mass of approximately 48 kDa (W. F. McDonald, N. Klemperer, and P. Traktman, Virology 234:168-175, 1997). Using these criteria, we established a six-step chromatographic purification procedure, in which a prominent approximately 45-kDa band was found to copurify with processive polymerase activity. This species was identified as the product of the A20 gene. By use of recombinant viruses that direct the overexpression of A20 and/or the DNA polymerase, we verified the physical interaction between the two proteins in coimmunoprecipitation experiments. We also demonstrated that simultaneous overexpression of A20 and the DNA polymerase leads to a specific and robust increase in levels of processive polymerase activity. Taken together, we conclude that the A20 gene encodes a component of the processive DNA polymerase complex. Genetic data that further support this conclusion are presented in the accompanying report, which documents that temperature-sensitive mutants with lesions in the A20 gene have a DNA(-) phenotype that correlates with a deficit in processive polymerase activity (A. Punjabi et al, J. Virol. 75:12308-12318, 2001).

Structural analyses of gp45 sliding clamp interactions during assembly of the bacteriophage T4 DNA polymerase holoenzyme. I. Conformational changes within the gp44/62-gp45-ATP complex during clamp loading

A multisubunit ring-shaped protein complex is used to tether the polymerase to the DNA at the primer-template junction in most DNA replication systems. This "sliding clamp" interacts with the polymerase, completely encircles the DNA duplex, and is assembled onto the DNA by a specific clamp loading complex in an ATP-driven process. Site-specific mutagenesis has been used to introduce single cysteine residues as reactive sites for adduct formation within each of the three subunits of the bacteriophage T4-coded sliding clamp complex (gp45). Two such mutants, gp45S19C and gp45K81C, are reacted with the cysteine-specific photoactivable cross-linker TFPAM-3 and used to track the changes in the relative positioning of the gp45 subunits with one another and with the other components of the clamp loading complex (gp44/62) in the various stages of the loading process. Cross-linking interactions performed in the presence of nucleotide cofactors show that ATP binding and hydrolysis, interaction with primer-template DNA, and release of ADP all result in significant conformational changes within the clamp loading cycle. A structural model is presented to account for the observed rearrangements of intersubunit contacts within the complex during the loading process.

Thermus thermophilis dnaX homolog encoding gamma- and tau-like proteins of the chromosomal replicase

This report identifies the dnaX homolog from Thermus thermophilis. Replicases from bacteria to humans contain subunits that are homologous to one another. These homologs are subunits of a clamp loading apparatus that loads sliding clamps onto DNA, which in turn act as mobile tethers for the replication machinery. In Escherichia coli, two of these subunits (gamma and tau) are encoded by one gene (dnaX) in nearly equal amounts by way of an efficient translational frameshift. The gamma and tau subunits form the central touchpoint that holds together two DNA polymerases with one clamp loading apparatus to form the E. coli chromosomal replicase, DNA polymerase III holoenzyme. The E. coli holoenzyme is an efficient replication machine that simultaneously replicates both strands of duplex DNA. The T. thermophilis dnaX homolog also contains a frameshift signature and produces both tau- and gamma-like proteins. Recombinant T. thermophilis tau- and gamma-like proteins, expressed in E. coli, have an oligomeric state similar to that of their E. coli counterparts and display ATPase activity that is stimulated by DNA. These results imply that T. thermophilis utilizes a DNA polymerase III holoenzyme replication machinery similar to that of E. coli.

Schizosaccharomyces pombe proliferating cell nuclear antigen mutations affect DNA polymerase delta processivity

We introduced nine site-directed mutations into seven conserved fission yeast proliferative cell nuclear antigen (PCNA) residues, Leu2, Asp63, Arg64, Gly69, Gln201, Glu259, and Glu260, either as single or as double mutants. Both the recombinant wild type and mutant PCNAs were able to form homotrimers in solution and to sustain growth of a null pcna strain (Deltapcna). Wild type Schizosaccharomyces pombe PCNA and PCNA proteins with mutations in Asp63, Gln201, Glu259, or Glu260 to Ala were able to stimulate DNA synthetic activity and to enhance the processivity of calf thymus DNA polymerase delta holoenzyme similar to calf thymus PCNA. Mutations of Leu2 to Val or Arg64 to Ala, either singly or as a double mutant, yielded PCNA mutant proteins that had reduced capacity in enhancing the processivity of DNA polymerase delta but showed no deficiency in stimulation of the ATPase activity of replication factor C. S. pombe Deltapcna strains sustained by these two mutant-pcna alleles had moderate defects in growth and displayed elongated phenotypes. These cells, however, were not sensitive to UV irradiation. Together, these in vitro and in vivo studies suggest that the side chains of Leu2 and Arg64 in one face of the PCNA trimer ring structure are two of the several sites involved in tethering DNA polymerase delta for processive DNA synthesis during DNA replication.

An explanation for lagging strand replication: polymerase hopping among DNA sliding clamps

The replicase of E. coli, DNA polymerase III holoenzyme, is tightly fastened to DNA by its ring-shaped beta sliding clamp. However, despite being clamped to DNA, the polymerase must rapidly cycle on and off DNA to synthesize thousands of Okazaki fragments on the lagging strand. This study shows that DNA polymerase III holoenzyme cycles from one DNA to another by a novel mechanism of partial disassembly of its multisubunit structure and then reassembly. Upon completing a template, the polymerase disengages from its beta clamp, hops off DNA, and reassociates with another beta clamp at a new primed site. The original beta clamp is left on DNA and may be harnessed by other machineries to coordinate their action with chromosome replication.

DNA replication: enzymology and mechanisms

Research into the enzymology of DNA replication has seen a multitude of highly significant advances during the past year, in both prokaryotic and eukaryotic systems. The scope of this article is limited to chromosomal replicases and origins of initiation. The multiprotein chromosomal replicases of prokaryotes and eukaryotes appear to be strikingly similar in structure and function, although future work may reveal their differences. Recent developments, elaborating the activation of origins in several systems, have begun to uncover mechanisms of regulation. The enzymology of eukaryotic origins has, until now, been limited to viral systems, but over the past few years, enzymology has caught a grip on the cellular origins of yeast.

holE, the gene coding for the theta subunit of DNA polymerase III of Escherichia coli: characterization of a holE mutant and comparison with a dnaQ (epsilon-subunit) mutant

DNA polymerase III holoenzyme is a multiprotein complex responsible for the bulk of chromosomal replication in Escherichia coli and Salmonella typhimurium. The catalytic core of the holoenzyme is an alpha epsilon theta heterotrimer that incorporates both a polymerase subunit (alpha; dnaE) and a proofreading subunit (epsilon; dnaQ). The role of theta is unknown. Here, we describe a null mutation of holE, the gene for theta. A strain carrying this mutation was fully viable and displayed no mutant phenotype. In contrast, a dnaQ null mutant exhibited poor growth, chronic SOS induction, and an elevated spontaneous mutation rate, like dnaQ null mutants of S. typhimurium described previously. The poor growth was suppressible by a mutation affecting alpha which was identical to a suppressor mutation identified in S. typhimurium. A double mutant null for both holE and dnaQ was indistinguishable from the dnaQ single mutant. These results show that the theta subunit is dispensable in both dnaQ+ and mutant dnaQ backgrounds, and that the phenotype of epsilon mutants cannot be explained on the basis of interference with theta function.