Method to study cell migration under uniaxial compression

Mechanical Cues for Triggering and Regulating Cellular Movement Selectively at the Single-Cell Level

Cell motility plays important roles in many biophysical and physiological processes ranging from in vitro biomechanics, wound healing, to cancer metastasis. This work introduces a new means to trigger and regulate motility individually using transient mechanical stimulus applied to designated cells. Using BV2 microglial cells, our investigations indicate that motility can be reproducibly and reliably initiated using mechanical compression of the cells. The location and magnitude of the applied force impact the movement of the cell. Based on observations from this investigation and current knowledge of BV2 cellular motility, new physical insights are revealed into the underlying mechanism of force-induced single cellular movement. The process involves high degrees of myosin activation to repair actin cortex breakages induced by the initial mechanical compression, which leads to focal adhesion degradation, lamellipodium detachment, and finally, cell polarization and movement. Modern technology enables accurate control over force magnitude and location of force delivery, thus bringing us closer to programming cellular movement at the single-cell level. This approach is of generic importance to other cell types beyond BV2 cells and has the intrinsic advantages of being transient, non-toxic, and non-destructive, thus exhibiting high translational potentials including mechano-based therapy.

Extended Methods for 2D Confinement

Physical confinement in microfluidic devices has become a common technique to induce and study cell migration in a large range of cell types. Confined migration was previously understudied due to the limitations of 2D migration assays but has emerged as an important mode of migration in the past decade. Furthermore, confinement improves the quality of the imaging and simplifies the analysis of trajectories by confining migration to the plane of acquisition. Protocols described in this chapter relate to methods extending the previously published 2D confinement technique. First, we explain a method to increase the complexity of the confinement chamber by microfabricating nanometer-sized PDMS grooves on the bottom surface, usually used for contact guidance studies. Then, we describe a method to perform the confinement on cells embedded inside a μm-thin 3D collagen gel. Finally, we describe an alternative method to confine cells based on agarose, so that cells can be fixed or drug perfused while being confined, which is currently not possible in the 2D confinement silicone-based device.

Blebs—Formation, Regulation, Positioning, and Role in Amoeboid Cell Migration

In the context of development, tissue homeostasis, immune surveillance, and pathological conditions such as cancer metastasis and inflammation, migrating amoeboid cells commonly form protrusions called blebs. For these spherical protrusions to inflate, the force for pushing the membrane forward depends on actomyosin contraction rather than active actin assembly. Accordingly, blebs exhibit distinct dynamics and regulation. In this review, we first examine the mechanisms that control the inflation of blebs and bias their formation in the direction of the cell’s leading edge and present current views concerning the role blebs play in promoting cell locomotion. While certain motile amoeboid cells exclusively form blebs, others form blebs as well as other protrusion types. We describe factors in the environment and cell-intrinsic activities that determine the proportion of the different forms of protrusions cells produce.

Actin Turnover Required for Adhesion-Independent Bleb Migration

Cell migration is critical for many vital processes, such as wound healing, as well as harmful processes, such as cancer metastasis. Experiments have highlighted the diversity in migration strategies employed by cells in physiologically relevant environments. In 3D fibrous matrices and confinement between two surfaces, some cells migrate using round membrane protrusions, called blebs. In bleb-based migration, the role of substrate adhesion is thought to be minimal, and it remains unclear if a cell can migrate without any adhesion complexes. We present a 2D computational fluid-structure model of a cell using cycles of bleb expansion and retraction in a channel with several geometries. The cell model consists of a plasma membrane, an underlying actin cortex, and viscous cytoplasm. Cellular structures are immersed in viscous fluid which permeates them, and the fluid equations are solved using the method of regularized Stokeslets. Simulations show that the cell cannot effectively migrate when the actin cortex is modeled as a purely elastic material. We find that cells do migrate in rigid channels if actin turnover is included with a viscoelastic description for the cortex. Our study highlights the non-trivial relationship between cell rheology and its external environment during migration with cytoplasmic streaming.

Parallel-plate compression test for soft materials: confocal microscopy-assisted ferrule-top nanoindentation

The parallel-plate compression test is one of the simplest ways to measure the mechanical properties of a material. In this test, the Young's modulus ( E ) and the Poisson's ratio ( ν ) of the material are determined directly without applying any additional modelling and parameter fitting in the post-processing. This is, however, limited when dealing soft biological materials due to their inherent properties such as being inhomogeneous, microscopic, and overly compliant. By combining an interferometry-assisted parallel-plate compression system and a confocal microscope, we were able to overcome these limitations and measure the E (315 ± 52 Pa) and ν (0.210 ± 0.043) of fixated and permeabilized bovine oocytes.

Compression enhances invasive phenotype and matrix degradation of breast Cancer cells via Piezo1 activation

Background

Uncontrolled growth in solid breast cancer generates mechanical compression that may drive the cancer cells into a more invasive phenotype, but little is known about how such compression affects the key events and corresponding regulatory mechanisms associated with invasion of breast cancer cells including cellular behaviors and matrix degradation.

Results

Here we show that compression enhanced invasion and matrix degradation of breast cancer cells. We also identified Piezo1 as the putative mechanosensitive cellular component that transmitted compression to not only enhance the invasive phenotype, but also induce calcium influx and downstream Src signaling. Furthermore, we demonstrated that Piezo1 was mainly localized in caveolae, and both Piezo1 expression and compression-enhanced invasive phenotype of the breast cancer cells were reduced when caveolar integrity was compromised by either knocking down caveolin1 expression or depleting cholesterol content.

Conclusions

Taken together, our data indicate that mechanical compression activates Piezo1 channels to mediate enhanced breast cancer cell invasion, which involves both cellular events and matrix degradation. This may be a critical mechanotransduction pathway during breast cancer metastasis, and thus potentially a novel therapeutic target for the disease.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12860-021-00401-6.

The first junior European Calcium Society meeting: calcium research across scales, Kingdoms and countries

The first junior European Calcium Society online meeting, held October 20-21, 2020, aimed to promote junior researchers in the Ca²⁺ community. The meeting included four scientific sessions, covering Ca²⁺ research from molecular detail to whole organisms. Each session featured one invited speaker and three speakers selected based on submitted abstracts, with the overall aim of actively involving early-career researchers. Consequently, the meeting underlined the diversity of Ca²⁺ physiology, by showcasing research across scales and Kingdoms, as presented by a correspondingly diverse speaker panel across career stages and countries. In this meeting report, we introduce the visions of the junior European Calcium Society board and summarize the meeting content.

Effects of spatial confinement on migratory properties of Dictyostelium discoideum cells

Migratory environments of various eukaryotic cells, such as amoeba, leukocytes and cancer cells, typically involve spatial confinement. Numerous studies have recently emerged, aimed to develop experimental platforms that better recapitulate the characteristics of the cellular microenvironment. Using microfluidic technologies, we show that increasing confinement of Dictyostelium discoideum cells into narrower micro-channels resulted in a significant change in the mode of migration and associated arrangement of the actomyosin cytoskeleton. We observed that cells tended to migrate at constant speed, the magnitude of which was dependent on the size of the channels, as was the locomotory strategy adopted by each cell. Two different migration modes were observed, pseudopod-based and bleb-based migration, with bleb based migration being more frequent with increasing confinement and leading to slower migration. Beside the migration mode, we found that the major determinants of cell speed are its protrusion rate, the amount of F-actin at its leading edge and the number of actin foci. Our results highlighted the impact of the microenvironments on cell behavior. Furthermore, we developed a novel quantitative movement analysis platform for mono-dimensional cell migration that allows for standardization and simplification of the experimental conditions and aids investigation of the complex and dynamic processes occurring at the single-cell level.

Multiscale nature of cell rearrangement caused by collective cell migration

Collective cell migration (CCM), a highly coordinated and fine-tuned migratory mode, is involved in a plethora of biological processes, such as embryogenesis, tissue repair and cancer invasion. Although a good comprehension of how cells collectively migrate by following molecular rules has been generated, the impact of cellular rearrangements on collective migration remains less understood. Thus, considering CCM from a multi-scale quantitative approach could result in a powerful tool to address the contribution of cellular rearrangements in CCM and help to understand this important but still controversial topic. In this work, a review of existing literature in CCM modeling at different scales is given along with assortment of published experimental findings, to invite experimentalists to test given theoretical considerations in multicellular systems. In addition, three different time and space scales (free or weakly connected cells, cluster of cells and collision fronts of different cells clusters) are considered and the multi-scale nature of those processes was discussed with special emphasis of jamming and unjamming states.

Collective cell migration and residual stress accumulation: Rheological consideration

Stress generation during collective cell migration represents one of the key factors which influence the configuration of migrating cells, viscoelasticity of multicellular systems and their inter-relation. Local generation of stress (normal and shear) is significant even in 2D. Normal stress is primarily accumulated within a core region of migrating cell clusters during their movement through the dense environment and during the collisions of migrating cell clusters caused by uncorrelated motility. Shear stress can be significant within perturbed boundary layers around migrating clusters. Cells are more sensitive to the action of shear stress compared with normal stress. Shear stress of a few Pa significantly influences cell state. Prior studies have shown that collectively migrating cells move in such a way to minimize this stress, but it has not yet been determined how cells effectively minimize it. Deeper insight into possible cell mechanisms for minimizing undesirable shear stress would be of great importance because it may help to direct morphogenesis, accelerate wound healing or prevent cancer invasion. In the proposed model three primary mechanisms in which cells may reduce shear are given: decreasing speed, tissue thickening, and/or reducing slip effects. Suggestions obtained from the proposed model indicate a need for further experimental studies that will reveal whether the heterogeneity in the cell-cell adhesion types correlates well with the stiffness inhomogeneity, or changes in the adhesion clustering, cytoskeletal linkage or some other modification to the adhesion complex (adherens junctions or tight junctions) are occurring to influence overall adhesive strength.

Pressure sensing through Piezo channels controls whether cells migrate with blebs or pseudopods

Cells migrating within the body perform vital functions in development and for defense and repair of tissues. In this dense environment, cells encounter mechanical forces and constraints not experienced when moving under buffer, and, accordingly, many change how they move. We find that gentle squashing, which mimics mechanical resistance, causes cells to move using blebs—a form of projection driven by fluid pressure—rather than pseudopods. This behavior depends on the Piezo stretch-operated ion channel in the cell membrane and calcium fluxes into the cell. Piezo is highly conserved and is required for light touch sensation; this work extends its functions into migrating cells.

Blebs and pseudopods can both power cell migration, with blebs often favored in tissues, where cells encounter increased mechanical resistance. To investigate how migrating cells detect and respond to mechanical forces, we used a “cell squasher” to apply uniaxial pressure to Dictyostelium cells chemotaxing under soft agarose. As little as 100 Pa causes a rapid (<10 s), sustained shift to movement with blebs rather than pseudopods. Cells are flattened under load and lose volume; the actin cytoskeleton is reorganized, with myosin II recruited to the cortex, which may pressurize the cytoplasm for blebbing. The transition to bleb-driven motility requires extracellular calcium and is accompanied by increased cytosolic calcium. It is largely abrogated in cells lacking the Piezo stretch-operated channel; under load, these cells persist in using pseudopods and chemotax poorly. We propose that migrating cells sense pressure through Piezo, which mediates calcium influx, directing movement with blebs instead of pseudopods.

Oscillatory Switches of Dorso-Ventral Polarity in Cells Confined between Two Surfaces

To maneuver in a three-dimensional space, migrating cells need to accommodate to multiple surfaces. In particular, phagocytes have to explore their environment in the search for particles to be ingested. To examine how cells decide between competing surfaces, we exposed single cells of Dictyostelium to a defined three-dimensional space by confining them between two planar surfaces: those of a cover glass and of a wedged microcantilever. These cells form propagating waves of filamentous actin and PIP3 on their ventral substrate-attached surface. The dynamics of wave formation in the confined cells was explored using two-focus fluorescence imaging. When waves formed on one substrate, wave formation on the other substrate was efficiently suppressed. The propensity for wave formation switched between the opposing cell surfaces with periods of 2-5 min by one of two modes: 1) a rolling mode involving the slipping of a wave along the nonattached plasma membrane and 2) de novo initiation of waves on the previously blank cell surface. These data provide evidence for a cell-autonomous oscillator that switches dorso-ventral polarity in a cell simultaneously exposed to multiple substrate surfaces.

Integrated cancer tissue engineering models for precision medicine

Tumors are not merely cancerous cells that undergo mindless proliferation. Rather, they are highly organized and interconnected organ systems. Tumor cells reside in complex microenvironments in which they are subjected to a variety of physical and chemical stimuli that influence cell behavior and ultimately the progression and maintenance of the tumor. As cancer bioengineers, it is our responsibility to create physiologic models that enable accurate understanding of the multi-dimensional structure, organization, and complex relationships in diverse tumor microenvironments. Such models can greatly expedite clinical discovery and translation by closely replicating the physiological conditions while maintaining high tunability and control of extrinsic factors. In this review, we discuss the current models that target key aspects of the tumor microenvironment and their role in cancer progression. In order to address sources of experimental variation and model limitations, we also make recommendations for methods to improve overall physiologic reproducibility, experimental repeatability, and rigor within the field. Improvements can be made through an enhanced emphasis on mathematical modeling, standardized in vitro model characterization, transparent reporting of methodologies, and designing experiments with physiological metrics. Taken together these considerations will enhance the relevance of in vitro tumor models, biological understanding, and accelerate treatment exploration ultimately leading to improved clinical outcomes. Moreover, the development of robust, user-friendly models that integrate important stimuli will allow for the in-depth study of tumors as they undergo progression from non-transformed primary cells to metastatic disease and facilitate translation to a wide variety of biological and clinical studies.

Image based modeling of bleb site selection

Cells often employ fast, pressure-driven blebs to move through tissues or against mechanical resistance, but how bleb sites are selected and directed to the cell front remains an open question. Previously, we found that chemotaxing Dictyostelium cells preferentially bleb from concave regions, where membrane tension facilitates membrane-cortex detachment. Now, through a novel modeling approach based on actual cell contours, we use cell geometry to predict where blebs will form in migrating cells. We find that cell geometry alone, and by implication, physical forces in the membrane, is sufficient to predict the location of blebs in rounded cells moving in a highly resistive environment. The model is less successful with more polarized cells moving against less resistance, but can be greatly improved by positing a front-to-back gradient in membrane-cortex adhesion. In accord with this prediction, we find that Talin, which links membrane and cortex, forms such a front-to-back gradient. Thus our model provides a means of dissecting out the role of physical forces in controlling where blebs form, and shows that in certain circumstances they could be the major determining factor.