The role of occupational Aspergillus exposure in the development of diseases

Aspergillus spp. have a high nutritional versatility and good growth on a large variety of construction materials. They also colonize soil or food, but decaying vegetation is their primary ecological niche. Therefore, exposure to fungi may occur at home, during hospitalization, during specific leisure activities, or at the workplace. The development of Aspergillus infections depends on the interplay between host susceptibility and the organism. Environments with high counts of fungal elements (conidia, hyphal fragments and others), high levels of bioarerosols, and elevated concentrations of mycotoxins or other volatile organic compounds should be considered as potential hazards, since they may present a risk to the exposed person. Rural tasks as well as work related to wood and food industries, poultries, swineries, waste handling plants, and other occupational environments involving contaminated organic material are among the ones posing higher respiratory risks to the workers. This paper presents a review of several studies related to occupational and indoor exposure to Aspergillus, potential health effects related to that exposure, and associated exposure assessment procedures.

Occupational exposure to bioburden in Portuguese bakeries: an approach to sampling viable microbial load

In bakeries, a number of operations such as mixing are associated with exposure to air-suspended flour dust and related bioburden. The aim of this study was to find the best active sampling approach to the assessment of occupational exposure to bioburden in Portuguese bakeries based on the data obtained with the use of specific impaction and impinger devices. We used impaction to collect fungal particles from 100 L air samples onto malt extract agar (MEA) supplemented with chloramphenicol (0.05 %). For growing fungi we also used dichloran glycerol (DG18) agar-based media and for mesophilic bacteria we used tryptic soy agar (TSA) supplemented with nystatin (0.2 %). For Enterobacteriaceae we used violet red bile agar (VRBA). With impingers we also collected 300 L air samples at the 300 L/min airflow rate, inoculated onto the same culture media. The two methods, impaction and impinger, showed statistically significant differences in the following counts: fungal on MEA (z=-2.721, p=0.007), fungal on DG18 (z=-4.830, p=0.000), total bacteria (z=-5.435, p=0.000), and Gram-negative coliforms (z=-3.716, p=0.000). In all cases the impaction method detected significantly higher concentrations than the impinger method. Fungal and bacterial loads were higher in the production unit and lower in the shop. The fungal load obtained with impaction varied between 10 and 5140 CFU m-3, and total bacterial counts ranged between 10 and 4120 CFU m-3. This study has shown that the impaction method is the best active sampling approach to assessing viable bioburden in this specific occupational environment, but a multi-faceted approach to sampling and analyses combining methods and media enables a more refined risk characterisation and, consequently, better tailored risk control measures to reduce adverse health outcomes in workers.

Filters from taxis air conditioning system: A tool to characterize driver's occupational exposure to bioburden?

Bioburden proliferation in filters from air conditioning systems of taxis represents a possible source of occupational exposure. The aim of this study was to determine the occurrence of fungi and bacteria in filters from the air conditioning system of taxis used for patient transportation and to assess the exposure of drivers to bioburden. Filters from the air conditioning systems of 19 taxis and 28 personal vehicles (used as controls) operating in three Portuguese cities including the capital Lisbon, were collected during the winter season. The occurrence and significance of bioburden detected in the different vehicles are reported and discussed in terms of colony-forming units (CFU) per 1 m² of filter area and by the identification of the most frequently detected fungal isolates based on morphology. Azole-resistant mycobiota, fungal biomass, and molecular detection of Aspergillus species/strains were also determined. Bacterial growth was more prevalent in taxis (63.2%) than in personal vehicles (26.3%), whereas fungal growth was more prevalent in personal vehicles (53.6%) than in taxis (21.1-31.6%). Seven different azole-resistant species were identified in this study in 42.1% taxi filters. Levels of fungal biomass were above the detection limit in 63% taxi filters and in 75% personal vehicle filters. No toxigenic species were detected by molecular analysis in the assessed filters. The results obtained show that bioburden proliferation occurs widely in filters from the air conditioning systems of taxis, including the proliferation of azole-resistant fungal species, suggesting that filters should be replaced more frequently. The use of culture based-methods and molecular tools combined enabled an improved risk characterization in this setting.

Generation and Characterization of Indoor Fungal Aerosols for Inhalation Studies

In the indoor environment, people are exposed to several fungal species. Evident dampness is associated with increased respiratory symptoms. To examine the immune responses associated with fungal exposure, mice are often exposed to a single species grown on an agar medium. The aim of this study was to develop an inhalation exposure system to be able to examine responses in mice exposed to mixed fungal species aerosolized from fungus-infested building materials. Indoor airborne fungi were sampled and cultivated on gypsum boards. Aerosols were characterized and compared with aerosols in homes. Aerosols containing 10⁷ CFU of fungi/m³ air were generated repeatedly from fungus-infested gypsum boards in a mouse exposure chamber. Aerosols contained Aspergillus nidulans, Aspergillus niger, Aspergillus ustus, Aspergillus versicolor, Chaetomium globosum, Cladosporiumherbarum, Penicillium brevicompactum, Penicillium camemberti, Penicillium chrysogenum, Penicillium commune, Penicillium glabrum, Penicillium olsonii, Penicillium rugulosum, Stachybotrys chartarum, and Wallemia sebi. They were all among the most abundant airborne species identified in 28 homes. Nine species from gypsum boards and 11 species in the homes are associated with water damage. Most fungi were present as single spores, but chains and clusters of different species and fragments were also present. The variation in exposure level during the 60 min of aerosol generation was similar to the variation measured in homes. Through aerosolization of fungi from the indoor environment, cultured on gypsum boards, it was possible to generate realistic aerosols in terms of species composition, concentration, and particle sizes. The inhalation-exposure system can be used to study responses to indoor fungi associated with water damage and the importance of fungal species composition.

Occupational Exposure to Aflatoxin B1 in a Portuguese Poultry Slaughterhouse

Aflatoxin B1 (AFB1) is a secondary metabolite produced by the fungi Aspergillus flavus and is the most potent hepatocarcinogen known in mammals and has been classified by the International Agency of Research on Cancer as Group 1 carcinogen. Although dietary exposure to AFB1 has been extensively documented, there are still few studies dedicated to the problem of occupational exposure. Considering recent findings regarding AFB1 occupational exposure in poultry production, it was considered relevant to clarify if there is also exposure in poultry slaughterhouses. Occupational exposure assessment to AFB1 was done with a biomarker of internal dose that measures AFB1 in the serum by enzyme-linked immunosorbent assay. Thirty workers from a slaughterhouse were enrolled in this study. A control group (n = 30) was also considered in order to know AFB1 background levels for Portuguese population. Fourteen workers (47.0%) showed detectable levels of AFB1 with values from 1.06 to 4.03ng ml(-1), with a mean value of 1.73ng ml(-1). No AFB1 was detected in serum of individuals used as controls. Despite uncertainties regarding the exposure route that is contributing more to exposure (inhalation or dermal) is possible to state that exposure to AFB1 is occurring in the slaughterhouse studied. It seems that reducing AFB1 contamination in poultry production can have a positive result in this occupational setting.

Determination of ATP-activity as a useful tool for monitoring microbial load in aqueous humidifier samples

Air humidifier water tanks are potential sources of microbial contaminants. Aerosolization of these contaminants is associated with the development of airway and lung diseases; therefore, implementation of preventive strategies including monitoring of the microbial contamination is recommended. So far, culture-based methods that include measuring colony forming units (CFU) are widely used to monitor microbial load. However, these methods are time consuming and have considerable drawbacks. As a result, alternative methods are needed which provide not only clear and accurate results concerning microbial load in water samples, but are also rapid and easy to use in the field. This paper reports on a rapid test for ATP quantification as an alternative method for microbial monitoring, including its implementation, validation and application in the field. For this purpose, 186 water samples were characterized with different methods, which included ATP analysis, culture-based methods, endotoxin activity (common and rapid test), pyrogenic activity and number of particles. Half of the samples was measured directly in the field and the other half one day later in the laboratory. The results of both tests are highly correlated. Furthermore, to check how representative the result from one sample of a water source is, a second sample of the same water tank were collected and measured. Bioluminescence results of the undiluted samples covered a range between 20 and 25,000 relative light units (RLU) and correlated with the results obtained using the other methods. The highest correlation was found between bioluminescence and endotoxin activity (rs=0.79) as well as pyrogenic activity (rs=0.75). Overall, the results of this study indicate that ATP measurement using bioluminescence is a suitable tool to obtain rapid, reproducible and sensitive information on the microbial load of water samples, and is suitable to use in the field. However, to use ATP measurement as an indicator of water quality, criteria of assessment has to be discussed.