Effectiveness of school-based sleep promotion programs for adolescents: a systematic review protocol

OBJECTIVE

This systematic review will assess the effectiveness of school-based sleep promotion programs on sleep knowledge, hygiene, quality, behavior, and efficiency in adolescents.

INTRODUCTION

Adolescents need to sleep between 8 and 10 hours per night; however, most sleep fewer hours due to peer and school pressure, stress, and excessive use of electronic devices at night. Sleep deprivation can lead to cardiovascular problems, issues with stress management, and suicidal ideation. Schools are an ideal space to implement intervention programs, providing the opportunity to reach a large number of adolescents. Considering the negative impacts of poor sleep, it is essential to assess the effectiveness of school-based sleep promotion programs on sleep knowledge, hygiene, quality, behavior, and efficiency.

INCLUSION CRITERIA

Studies with adolescents (10-19 years old) exposed to school-based sleep promotion programs will be included. Studies in English, Spanish, and Portuguese will be considered, with no time limits.

METHODS

Nine databases, CINAHL, Cochrane Central Register of Controlled Trials, ERIC (all via EBSCOhost), MEDLINE (PubMed), LILACS, SciELO, Psychology and Behavioral Sciences Collection, Web of Science Core Collection, and Scopus, will be searched from inception to identify relevant studies. Two independent reviewers will perform the study selection, critical appraisal using JBI tools, and data extraction. Studies will, where possible, be pooled in meta-analysis. Heterogeneity will be assessed using the standard χ 2 and I2 tests. Statistical analyses will be performed using the random effects model. If fewer than 5 studies are included, the fixed effects model will be used. The Grading of Recommendations, Assessment, Development and Evaluation (GRADE) approach will be used to grade the certainty of evidence and a Summary of Findings will be created.

REVIEW REGISTRATION

PROSPERO CRD42023374838.

Candida auris in Intensive Care Setting: The First Case Reported in Portugal

Candida auris is an opportunistic human pathogen that has rapidly spread to multiple countries and continents and has been associated with a high number of nosocomial outbreaks. Herein, we report the first case of C. auris in Portugal, which was associated with a patient transferred from Angola to an ICU in Portugal for liver transplantation after a SARS-CoV-2 infection. C. auris was isolated during the course of bronchoalveolar lavage, and it was subjected to antifungal susceptibility testing and whole-genome sequence analysis. This isolate presents low susceptibility to azoles and belongs to the genetic clade III with a phylogenetic placement close to African isolates. Although clade III has already been reported in Europe, taking into account the patient's clinical history, we cannot discard the possibility that the patient's colonization/infection occurred in Angola, prior to admission in the Portuguese hospital. Considering that C. auris is a fungal pathogen referenced by WHO as a critical priority, this case reinforces the need for continuous surveillance in a hospital setting.

Strategies for Monitoring Microbial Life in Beach Sand for Protection of Public Health

The 2021 revised guidelines of the World Health Organization recommend monitoring the quality of sand in addition to water at recreational beaches. This review provides background information about the types of beaches, the characteristics of sand, and the microbiological parameters that should be measured. Analytical approaches are described for quantifying fungi and fecal indicator bacteria from beach sand. The review addresses strategies to assess beach sand quality, monitoring approaches, sand remediation, and the proposed way forward for beach sand monitoring programs. In the proposed way forward, recommendations are provided for acceptable levels of fungi given their distribution in the environment. Additional recommendations include evaluating FIB distributions at beaches globally to assess acceptable ranges of FIB levels, similar to those proposed for fungi.

Molecular detection of Aspergillus in respiratory samples collected from patients at higher risk of chronic pulmonary aspergillosis

OBJECTIVE

Aspergillosis diagnosis depends on the detection of Aspergillus in biological samples ─ usually using cultural and immunoenzyme techniques ─ but their sensitivity and specificity varies. We aimed to study the prevalence of Aspergillus in patients at higher risk of chronic pulmonary aspergillosis (i.e., HIV-infected patients and individuals with active or previous tuberculosis), and to determine the potential role of molecular approaches to increase detection of Aspergillus in respiratory samples.

METHODS

The DNA extracted from 43 respiratory samples that had been previously analyzed by immunoenzyme and/or cultural techniques was amplified by real-time multiplex PCR, and the results of these methods were compared. We also sequenced the ITS1 region and the calmodulin gene in 10 respiratory samples to perform a pilot metagenomic study to understand the ability of this methodology to detect potential pathogenic fungi in the lung mycobiome.

RESULTS

Real-time Aspergillus PCR test exhibited a higher positivity rate than the conventional techniques used for aspergillosis diagnosis, particularly in individuals at risk for chronic pulmonary aspergillosis. The metagenomic analysis allowed for the detection of various potentially pathogenic fungi.

CONCLUSIONS

Molecular techniques, including metagenomics, have great ability to detect potentially pathogenic fungi rapidly and efficiently in human biological samples.

Environmental and bioclimatic factors influencing yeasts and molds distribution along European shores

The present study employed data collected during the Mycosands survey to investigate the environmental factors influencing yeasts and molds distribution along European shores applying a species distribution modelling approach. Occurrence data were compared to climatic datasets (temperature, precipitation, and solar radiation), soil datasets (chemical and physical properties), and water datasets (temperature, salinity, and chlorophyll-a concentration) downloaded from web databases. Analyses were performed by MaxEnt software. Results suggested a different probability of distribution of yeasts and molds along European shores. Yeasts seem to tolerate low temperatures better during winter than molds and this reflects a higher suitability for the Northern European coasts. This difference is more evident considering suitability in waters. Both distributions of molds and yeasts are influenced by basic soil pH, probably because acidic soils are more favorable to bacterial growth. Soils with high nitrogen concentrations are not suitable for fungal growth, which, in contrast, are optimal for plant growth, favored by this environment. Finally, molds show affinity with soil rich in nickel and yeasts with soils rich in cadmium resulting in a distribution mainly at the mouths of European rivers or lagoons, where these metals accumulate in river sediments.

Antimicrobial Resistance and Biofilms Underlying Catheter-Related Bloodstream Coinfection by Enterobacter cloacae Complex and Candida parapsilosis

Biofilm-associated infections are a public health concern especially in the context of healthcare-associated infections such as catheter-related bloodstream infections (CRBSIs). We evaluated the biofilm formation and antimicrobials resistance (AMR) of Enterobacter cloacae complex and Candida parapsilosis co-isolated from a CRBSI patient. Antimicrobial susceptibility of central venous catheters (CVCs) and hemoculture (HC) isolates was evaluated, including whole genome sequencing (WGS) resistome analysis and evaluation of gene expression to obtain insight into their AMR determinants. Crystal violet assay was used to assess dual biofilm biomass and microscopy was used to elucidate a microorganism’s distribution within biofilms assembled on different materials. Bacteria were multidrug-resistant including resistance to colistin and beta-lactams, likely linked to the mcr-9-like phosphoethanolamine transferase and to an ACT family cephalosporin-hydrolyzing class C beta-lactamase, respectively. The R398I and Y132F mutations in the ERG11 gene and its differential expression might account for C. parapsilosis resistance to fluconazole. The phenotype of dual biofilms assembled on glass, polystyrene and polyurethane depends on the material and how biofilms were initiated by one or both pathogens. Biofilms assembled on polyurethane were denser and richer in the extracellular polymeric matrix, and microorganisms were differently distributed on the inner/outer surface of the CVC.

The effect of filling technique on the cuspal strain, polymerization shrinkage stress, enamel crack formation and depth of cure of restored molars

OBJECTIVE

Evaluate the effect of different restorative filling techniques on the residual shrinkage stress (ShrS), cuspal strain (CS), depth of cure (DC), and enamel crack formation (Ec) in molars with MOD restorations.

METHODS

Post-gel shrinkage, elastic modulus, compressive and diametral tensile strength of the Filtek One Bulk Fill composite were calculated. Sixty molars with MOD preparations were restored using four filling techniques: Bulk; Horizontal; Oblique; Natural enamel and dentin substitution (NEDS) technique. CS was measured using a strain gauge (n = 10). The DC (n = 5) was measured using Knoop hardness. Shrinkage stress/strain was analyzed using 3D finite element analysis. The Ec analysis was carried out by transillumination. Two-way ANOVA with repeated measures and Tukey's HSD test (α = 0.05) was performed for the CS data. Two-Way ANOVA and Tukey's HSD test was performed for the DC data (α = 0.05).

RESULTS

CS was higher at the lingual cusp for the horizontal and NEDS technique. No statistical difference was found between the buccal and lingual CS values for the Bulk (p = 0.367) or Oblique techniques (p = 0.192). CS values were lower for the Bulk. More enamel cracks were found for the Bulk. DC was lower at 4 mm regardless the filling technique. The Horizontal showed the highest ShrS values. The Bulk generated the lower ShrS values.

SIGNIFICANCE

A Bulk technique caused the lowest shrinkage stress/strain. An Oblique technique yielded the best balance between stress, strain and crack formation. NEDS technique is a good alternative to decrease the number of increments while maintaining the stress levels nearby the Oblique technique.

Algorithm to assess the presence of Aspergillus fumigatus resistant strains: The case of Norwegian sawmills

Association between selection pressure caused by the use of azole fungicides in sawmills and the development of fungal resistance has been described. The aim of this study was to implement an algorithm to assess the presence of Aspergillus section Fumigati resistant strains in sawmills.Eighty-six full-shift inhalable dust samples were collected from eleven industrial sawmills in Norway. Different culture media were used and molecular identification to species level in Aspergillus section Fumigati was done by calmodulin sequencing and TR₃₄/L98H and TR₄₆/Y121F/T289A mutations were screened by real-time PCR assay and confirmed by cyp51A sequencing. Six Fumigati isolates were identified as A. fumigatus sensu stricto and two of these grew on azole-supplemented media and were further analyzed by real-time PCR. One was confirmed to be a TR₃₄/L98H mutant.The obtained results reinforce the need to assess the presence of A. fumigatus sensu stricto resistant isolates at other workplaces with fungicide pressure.

Attitudes and knowledge in blood donation among nursing students: A cross-sectional study in Spain and Portugal

BACKGROUND

Blood donors are key in meeting the ever-increasing blood requirements worldwide. The Spanish and Portuguese donation systems are based on altruism and voluntariness. However, nursing students may not be fully aware of the importance of this social responsibility and their professional skills in this field.

OBJECTIVES

This study aimed to identify differences regarding attitudes towards and knowledge about blood donation among Spanish and Portuguese undergraduate Nursing students (1st to 8th semester), as well as to analyse how different variables account for them.

DESIGN

A multicentre cross-sectional study was carried out.

PARTICIPANTS/SETTINGS

The participants of the study were 1038 nursing students from four Schools of Nursing in two countries, Spain and Portugal.

METHODS

The web-based CADS-19 questionnaire to measure attitudes and knowledge was used during the academic years 2018-2019 and 2019-2020. Additionally, sociodemographic data were collected.

RESULTS

The mean knowledge score was 3.079 out of 10 (SD = 1.429). The level of knowledge differed significantly by gender, where females scored higher, along with older students and previous donors. The highest mean attitude score corresponded to the "external incentives" dimension, significant differences were found between countries. In barriers and incentives, some differences were found depending on gender or sexual orientation, among others, with slightly better attitudes in Spanish participants.

CONCLUSIONS

The level of knowledge was lower than expected, considering participants were nursing students. The attitude's comparative analysis between both countries showed significant differences, especially in the pretext dimension. As for greater donation rates found in Spanish students, nurse-led international partnerships could be designed to enhance health literacy and sensitivity among nursing undergraduates. Interventions should focus on specific theoretical and practical training programs and educative actions should contribute to a greater awareness, motivation, and sensitise students to blood donation.

Mycosands: Fungal diversity and abundance in beach sand and recreational waters - Relevance to human health

The goal of most studies published on sand contaminants is to gather and discuss knowledge to avoid faecal contamination of water by run-offs and tide-retractions. Other life forms in the sand, however, are seldom studied but always pointed out as relevant. The Mycosands initiative was created to generate data on fungi in beach sands and waters, of both coastal and freshwater inland bathing sites. A team of medical mycologists and water quality specialists explored the sand culturable mycobiota of 91 bathing sites, and water of 67 of these, spanning from the Atlantic to the Eastern Mediterranean coasts, including the Italian lakes and the Adriatic, Baltic, and Black Seas. Sydney (Australia) was also included in the study. Thirteen countries took part in the initiative. The present study considered several fungal parameters (all fungi, several species of the genus Aspergillus and Candida and the genera themselves, plus other yeasts, allergenic fungi, dematiaceous fungi and dermatophytes). The study considered four variables that the team expected would influence the results of the analytical parameters, such as coast or inland location, urban and non-urban sites, period of the year, geographical proximity and type of sediment. The genera most frequently found were Aspergillus spp., Candida spp., Fusarium spp. and Cryptococcus spp. both in sand and in water. A site-blind median was found to be 89 Colony-Forming Units (CFU) of fungi per gram of sand in coastal and inland freshwaters, with variability between 0 and 6400 CFU/g. For freshwater sites, that number was 201.7 CFU/g (0, 6400 CFU/g (p = 0.01)) and for coastal sites was 76.7 CFU/g (0, 3497.5 CFU/g). For coastal waters and all waters, the median was 0 CFU/ml (0, 1592 CFU/ml) and for freshwaters 6.7 (0, 310.0) CFU/ml (p < 0.001). The results advocate that beaches should be monitored for fungi for safer use and better management.

Molecular epidemiology of aspergillosis in Magellanic penguins and susceptibility patterns of clinical isolates

Aspergillus section Fumigati is reported in up to 99% of aspergillosis cases in penguins. So far, no data regarding molecular epidemiology and azole resistance are available for A. fumigatus isolates collected from Magellanic penguins. The aim of this work was to perform molecular identification of Aspergillus section Fumigati at species level, to genotype those isolates using microsatellite markers, to evaluate the in vitro susceptibility patterns of A. fumigatus sensu stricto, and to characterize the cyp51A gene in clinical A. fumigatus strains isolated from Magellanic penguins with proven aspergillosis. All 34 isolates included in the study were identified as A. fumigatus sensu stricto. Analyzing the genetic diversity of the isolates of A. fumigatus sensu stricto, we identified two possible outbreaks in the rehabilitation center and we also observed the maintenance of clonal strains through the years. One A. fumigatus sensu stricto isolate was resistant to posaconazole, but the mutations found in the cyp51A gene of this isolate have not been described as conferring phenotypic resistance, suggesting that other mechanisms of resistance could be involved in the resistance of this isolate. With this study we were able to understand the molecular diversity of Aspergillus fumigatus isolates collected from Magellanic penguins, to characterize them and to associate them with the described global population of Aspergillus fumigatus.

Aspergillus collected in specific indoor settings: their molecular identification and susceptibility pattern

Exposure to Aspergillus conidia is an increased risk factor for the development of respiratory symptoms. The emergence of azole resistance in Aspergillus fumigatus is a major concern for the scientific community. The aim of this study was to perform the molecular identification of Aspergillus species collected from different occupational and non-occupational indoor settings and to study the azole susceptibility profile of the collected Fumigati isolates. The selected Aspergillus isolates were identified as belonging to the sections Fumigati, Nigri Versicolores, Terrei, Clavati and Nidulantes. All the Aspergillus fumigatus were screened for azole resistance using an agar media supplemented with itraconazole, voriconazole and posaconazole. None of the tested isolates showed resistance to those azoles. Knowledge of Aspergillus epidemiology in specific indoor environments allows a better risk characterization regarding Aspergillus burden. This study allowed the analysis of the molecular epidemiology and the determination of the susceptibility pattern of Aspergillus section Fumigati found in the studied indoor settings.

Tinea Corporis Caused by Trichophyton Benhamiae Transmitted by a Dog: First Case Report in Portugal

Dermatophytoses are superficial and contagious infections caused by dermatophyte fungi. They are the most frequent infectious dermatosis in clinical practice, and can affect the skin, hair and nails. Its correct diagnosis allows the understanding of clinical, ecological and epidemiological aspects associated with these microorganisms. Clinical presentation is variable and depends on the habitat (human, animal or soil origin), virulence of the fungus and on thehost’s immune status.We report the clinical case of a 62-year-old man with tinea corporis, which stands out for its exuberant clinical presentation and by the isolated agent, Trichophyton benhamiae (formerly known as Arthroderma benhamiae), an etiological agent of dermatophytosis that has not been scientifically reported in Portugal yet.

Trends on Aspergillus Epidemiology-Perspectives from a National Reference Laboratory Surveillance Program

Identification of Aspergillus to species level is important since sibling species may display variable susceptibilities to multiple antifungal drugs and also because correct identification contributes to improve the knowledge of epidemiological studies. Two retrospective laboratory studies were conducted on Aspergillus surveillance at the Portuguese National Mycology Reference Laboratory. The first, covering the period 2017–2018, aimed to study the molecular epidemiology of 256 Aspergillus isolates obtained from patients with respiratory, subcutaneous, or systemic infections and from environmental samples. The second, using our entire collection of clinical and environmental A. fumigatus isolates (N = 337), collected between 2012 and 2019, aimed to determine the frequency of azole-resistant A. fumigatus isolates. Aspergillus fumigatus sensu stricto was the most frequent species in both clinical and environmental samples. Overall, and considering all Aspergillus sections identified, a high frequency of cryptic species was detected, based on beta-tubulin or calmodulin sequencing (37% in clinical and 51% in environmental isolates). Regarding all Fumigati isolates recovered from 2012–2019, the frequency of cryptic species was 5.3% (18/337), with the identification of A. felis (complex), A. lentulus, A. udagawae, A. hiratsukae, and A. oerlinghauensis. To determine the frequency of azole resistance of A. fumigatus, isolates were screened for azole resistance using azole-agars, and 53 possible resistant isolates were tested by the CLSI microdilution reference method. Nine A. fumigatus sensu stricto and six Fumigati cryptic isolates showed high minimal inhibitory concentrations to itraconazole, voriconazole, and/or posaconazole. Real-time PCR to detect cyp51A mutations and sequencing of cyp51A gene and its promoter were performed. The overall frequency of resistance to azoles in A. fumigatus sensu stricto was 3.0%. With this retrospective analysis, we were able to detect one azole-resistant G54R mutant A. fumigatus environmental isolate, collected in 2015. The TR₃₄/L98H mutation, linked to environmental transmission route of azole resistance, was the most frequently detected mutation (N = 4; 1.4%). Our findings underline the demand for correct identification and susceptibility testing of Aspergillus isolates.

Untreated sewage contamination of beach sand from a leaking underground sewage system

Thirty people (mostly children) experienced an episode of skin rash days after a sand sifting beach operation at Porto Pim Beach in Faial, Azores during June 2019. An environmental and epidemiologic investigation was conducted to identify the cause of the outbreak of skin rash. The epidemiologic investigation found that some of the patients experiencing symptoms had never entered the beach water. During the pollution period and throughout the epidemiologic investigation, faecal indicator bacteria levels (94 CFU/100 ml for intestinal enterococci and 61 CFU/100 ml for Escherichia coli) in water remained under the limits used for the ninety-five percentile calculation of an Excellent coastal and transitional bathing water defined in the Portuguese Legislation (100 CFU/100 ml for intestinal enterococci and 250 CFU/100 ml for Escherichia coli). Thus sand contact was considered as a likely primary exposure route. Sand microbiological analysis for faecal indicator organisms and electron microscopy strongly suggested faecal contamination. Chemical analysis of the sand also revealed a concomitant substance compatible with sodium-hypochlorite as analysed using gas chromatography and subsequently confirmed by free chlorine analysis. Inspection of the toilet facilities and sewage disposal system revealed a leaking sewage distribution box. Collectively, results suggest that the cause of the outbreak was the leaking underground sewage distribution box that serviced the beach toilet facilities (40 m from beach), where sodium-hypochlorite was used for cleaning and disinfection. This sewage then contaminated the surficial sands to which beach goers were exposed. Chlorine being an irritant substance, was believed to have been the cause of the symptoms given the sudden presentation and dissipation of skin rashes. No gastro-intestinal illness was reported during this episode and during the following 30 days. Like water, beach sand should also be monitored for safety, especially for areas serviced by aged infrastructure.

[Candida auris: The Recent Emergence of a Multiresistant Pathogenic Fungi]

Candida auris was first described as a new species back in 2009. Although it differs markedly from other Candida species, this species can be misidentified as other yeasts in the routine microbiology laboratories. Therefore, its identification to species level should be confirmed by reference laboratories. Candida auris exhibits potential to cause invasive infections, and frequently shows a multidrugresistance pattern, and it is associated with high mortality rates. Outbreaks caused by Candida auris and associated with health care institutions have been reported in several countries around the world, including some European countries, such as the United Kingdom and Spain. In Portugal, to our knowledge, there are no known infections or colonization cases caused by Candida auris. This species can survive in the environment for several weeks and once introduced into the hospital environment, the risk of transmission is high, requiring strict infection control measures in order to prevent transmission. This paper intends to raise the awareness of the emergence of this fungal species, as well as to discuss the consequences of this situation.

Post-gel and Total Shrinkage Stress of Conventional and Bulk-fill Resin Composites in Endodontically-treated Molars

Clinical Relevance

The clinician should consider the polymerization shrinkage stress when selecting a composite resin for posterior restorations. The use of post-gel shrinkage values should guide the selection of a composite resin for posterior teeth.

SUMMARY

Objectives: The objective of this study was to evaluate the effect of the method used for calculation of polymerization shrinkage, total or post-gel, on the shrinkage stress of conventional and bulk-fill composite resins for restoring endodontically treated teeth using finite element analysis.

Methods and Materials: Four composite resins were tested for post-gel shrinkage (P-Shr) by the strain-gauge test and total shrinkage (TShr) using an optical method (n=10). Two conventional composite resins, Filtek Z350 XT (3M-ESPE; Z350) and TPH3 Spectrum (Dents-ply; TPH3) and two bulk-fill composite resins. Filtek Bulk-Fill Posterior (3M-ESPE; POST) SureFil SDR flow (Dentsply; SDR) were tested. Elastic modulus (E), diametral tensile strength (DTS), and compressive strength (CS) were also determined (n=10). The residual shrinkage stress was evaluated by finite element analysis with four restorative techniques: incremental with Z350 and TPH3; SDR/TPH3 (two bulk increments of 4 mm and two occlusal increments); and two bulk increments of 5 mm for POST. Data for P-Shr, T-Shr, E, DTS, and CS were analyzed by analysis of variance and Tukey’s test (α=0.05), and residual shrinkage was analyzed quantitatively and qualitatively by the modified von Mises criteria.

Results: SDR had the lowest CS values, POST and TPH3 had similar and intermediate values, and Z350 had the highest CS. TPH3 and Z350 had similar DTS values and values higher than SDR. Z350 and POST had higher P-Shr, and SDR had lower T-Shr. T-Shr resulted in higher shrinkage stress than P-Shr values. SDR/TPH3 resulted in higher shrinkage stress when using T-Shr and lower values when using the P-Shr value.

Conclusion: T-Shr resulted in higher stress in the enamel and in root dentin close to the pulp chamber than P-Shr values. The selection of the T-Shr or P-Shr changed the ranking of the shrinkage stress of the tested composite resin.

Schizophyllum commune sphenoidal sinusitis as presentation of a non-Hodgkin Lymphoma

Schizophyllum commune is a basidiomycetes worldwide distributed that has emerged as cause of invasive infections in immunosuppressed patients. We present a case of a man who was simultaneously diagnosed with a small cell non-Hodgkin lymphoma and a sphenoid sinusitis by S. commune. Intraoperative observation and histology description were crucial to consider an alternative diagnosis to mucormycosis suggested by the MRI. The diagnosis was made based on PCR identification and sequencing.

Candida auris, an Agent of Hospital-Associated Outbreaks: Which Challenging Issues Do We Need to Have in Mind?

The emergence of Candida auris is considered as one of the most serious problems associated with nosocomial transmission and with infection control practices in hospital environment. This multidrug resistant species is rapidly spreading worldwide, with several described outbreaks. Until now, this species has been isolated from different hospital surfaces, where it can survive for long periods. There are multiple unanswered questions regarding C. auris, such as prevalence in population, environmental contamination, effectiveness of infection prevention and control, and impact on patient mortality. In order to understand how it spreads and discover possible reservoirs, it is essential to know the ecology, natural environment, and distribution of this species. It is also important to explore possible reasons to this recent emergence, namely the environmental presence of azoles or the possible effect of climate change on this sudden emergence. This review aims to discuss some of the most challenging issues that we need to have in mind in the management of C. auris and to raise the awareness to its presence in specific indoor environments as hospital settings.

The role of occupational Aspergillus exposure in the development of diseases

Aspergillus spp. have a high nutritional versatility and good growth on a large variety of construction materials. They also colonize soil or food, but decaying vegetation is their primary ecological niche. Therefore, exposure to fungi may occur at home, during hospitalization, during specific leisure activities, or at the workplace. The development of Aspergillus infections depends on the interplay between host susceptibility and the organism. Environments with high counts of fungal elements (conidia, hyphal fragments and others), high levels of bioarerosols, and elevated concentrations of mycotoxins or other volatile organic compounds should be considered as potential hazards, since they may present a risk to the exposed person. Rural tasks as well as work related to wood and food industries, poultries, swineries, waste handling plants, and other occupational environments involving contaminated organic material are among the ones posing higher respiratory risks to the workers. This paper presents a review of several studies related to occupational and indoor exposure to Aspergillus, potential health effects related to that exposure, and associated exposure assessment procedures.

Molecular identification of clinical and environmental avian Aspergillus isolates

Aspergillosis causes high morbidity and mortality in avian species. The main goal of this study was to use molecular techniques to identify Aspergillus species collected from different avian species with aspergillosis. A subsample of those isolates was also screened for resistance to itraconazole. Over a 2-year period, clinical samples were recovered from 44 birds with clinical signs of the disease, clinical pathology results suspicious of aspergillosis, or from birds that died from Aspergillus spp. infection. Environmental sampling was also performed in seabird rehabilitation centers and natural seabird environments. Seventy-seven isolates (43 clinical and 34 environmental) were identified as Aspergillus fumigatus sensu stricto. No cryptic species from the Fumigati section were detected. Two environmental isolates were identified as Aspergillus nidulans var. dentatus and Aspergillus spinulosporus. None of the Aspergillus isolates tested were resistant to itraconazole. Our study emphasizes the dominant association of Aspergillus fumigatus sensu stricto in avian mycoses and shows the lack of itraconazole resistance in the studied isolates.

Detection of deep fungal infections: a polyphasic approach

PURPOSE

Tissue samples from patients with suspicion of deep or subcutaneous fungal infections were analysed at the Portuguese Reference Mycology Laboratory according to a proposed diagnostic approach, which aims to constitute a rapid and accurate diagnosis for these fungal infections.

METHODOLOGY

Forty-six tissue biopsy samples were analysed over a period of 26 months, using a diagnostic approach that includes culture, panfungal PCR and Aspergillus-directed PCR.Results/Key findings. Overall, 23 samples were reported as negative while the remaining 23 were reported as positive for fungi (PCR, culture and/or histology). PCR showed an estimated detection limit of 12 pg DNA µl^-1. From the 46 samples, 30 were negative for fungal DNA while 16 gave positive results. From these, 12 cases were detected by panfungal PCR and six cases by PCR directed toward Aspergillus. In 61 % of the cases, there was concordance between molecular and cultural methods. Aetiological agents identified were Candida albicans, C. glabrata, C. tropicalis, Trichosporon montevideense, Alternaria spp., Exophiala sp., Trichoderma sp., Histoplasma spp., Aspergillus fumigatus, Trichophyton rubrum and Paracoccidioides brasiliensis.

CONCLUSION

Our results showed that the proposed polyphasic approach appears to be a useful strategy in the detection of fungi from tissue samples, allowing a better prognosis. In further studies, the inclusion of a higher number of samples and the implementation of more genus-specific PCRs will certainly contribute to an increase in the specificity and sensitivity of this method.

Epidemiologia das infeções fúngicas superficiais em Portugal - revisão de 3 anos (2014-2016)

Introdução: As infeções fúngicas superficiais são as dermatoses infeciosas mais frequentes e a sua incidência continua a aumentar. Os dermatófitos são os principais agentes causais apresentando, contudo, uma distribuição geográfica variável.Material e Métodos: O presente estudo teve como objetivo a caracterização epidemiológica das infeções fúngicas superficiais diagnosticadas nos Serviços/Unidades de Dermatologia pertencentes ao Serviço Nacional de Saúde Português entre janeiro de 2014 e dezembro 2016 através da análise retrospetiva dos resultados das culturas realizadas durante esse período.Resultados: Foram estudados 2375 isolamentos, pertencentes a 2319 doentes. O dermatófito mais frequentemente isolado foi o Trichophyton rubrum (53,6%), tendo sido o principal agente causal da tinha da pele glabra (52,4%) e das onicomicoses (51,1%). Relativamente às tinhas do couro cabeludo, globalmente o Microsporum audouinii foi o agente mais prevalente (42,6%), seguido do Trichophyton soudanense (22,1%). Enquanto na área metropolitana de Lisboa estes dermatófitos foram os principais agentes de tinha do couro cabeludo, nas regiões Norte e Centro o agente mais frequente foi o Microsporum canis (58,5%). Os fungos leveduriformes foram os principais responsáveis pelas onicomicoses das mãos (76,7%).Conclusão: Os resultados deste estudo estão globalmente concordantes com a literatura científica. O Trichophyton rubrum apresenta-se como o dermatófito mais frequentemente isolado em cultura. Na tinha do couro cabeludo, na área metropolitana de Lisboa, as espécies antropofílicas de importação assumem particular destaque.

Stress Distribution, Tooth Remaining Strain, and Fracture Resistance of Endodontically Treated Molars Restored Without or With One or Two Fiberglass Posts And Direct Composite Resin

Objectives:

To evaluate the effects of direct composite resin without a post or with one or two fiberglass posts on the restoration of severely compromised endodontically treated molars.

Methods and Materials:

Forty-five molars with 2 mm of “remaining tooth structure” were divided into three groups: Wfgp, restored with Filtek Z350XT without a fiberglass post; 1fgp, restored with Z350XT with one fiberglass post in the distal root canal; and 2fgp, restored with Z350XT with two fiberglass posts, one in the distal root canal and the other in the mesial-buccal root canal. The teeth were load cycled. Tooth remaining strain was measured using strain gauges (n=10) at two moments: TrSt-100 N, during 100 N occlusal loading, and TrSt-Fr, at fracture load. Fracture resistance was calculated, and fracture mode was classified. The elastic modulus and Vickers hardness were calculated using dynamic indentation (n=5). Stress distribution was analyzed by three-dimensional finite element analysis.

Results:

The use of two fiberglass posts resulted in lower fracture resistance than was noted in the groups with one fiberglass post and without fiberglass posts. The lingual surface of the remaining tooth had higher strain values than the buccal surface, regardless of the restorative technique and moment of evaluation. The absence of a fiberglass post resulted in significantly higher strain values and more irreparable fracture modes than were noted in the other groups. The use of one fiberglass post had a better strain/fracture resistance ratio. Stresses were concentrated in the occlusal portion of the post and in the furcation region. The presence of one fiberglass post resulted in better stress distribution in the entire distal root dentin, reducing stress on the critical areas.

Conclusions:

The use of one fiberglass post for restoring molars with direct composite resin resulted in higher fracture resistance than did the use of two fiberglass posts; it also resulted in better tooth remaining strain and stress distribution and more reparable fracture modes than were seen in the group without a fiberglass post.

Next-generation sequencing and culture-based techniques offer complementary insights into fungi and prokaryotes in beach sands

A next-generation sequencing (NGS) approach, in conjunction with culture-based methods, was used to examine fungal and prokaryotic communities for the presence of potential pathogens in beach sands throughout Portugal. Culture-based fungal enumeration revealed low and variable concentrations of the species targeted (yeasts and dermatophytes), which were underrepresented in the community characterized by NGS targeting the ITS1 region. Conversely, NGS indicated that the potentially pathogenic species Purpureocillium liliacinum comprised nearly the entire fungal community. Culturable fecal indicator bacterial concentrations were low throughout the study and unrelated to communities characterized by NGS. Notably, the prokaryotic communities characterized revealed a considerable abundance of archaea. Results highlight differences in communities between methods in beach sand monitoring but indicate the techniques offer complementary insights. Thus, there is a need to leverage culture-based methods with NGS methods, using a toolbox approach, to determine appropriate targets and metrics for beach sand monitoring to adequately protect public health.

Antifungal susceptibility of 175 Aspergillus isolates from various clinical and environmental sources

Some environmental Aspergillus spp. isolates have been described as resistant to antifungals, potentially causing an emerging medical problem. In the present work, the antifungal susceptibility profile of 41 clinical and 134 environmental isolates of Aspergillus was determined using the CLSI microdilution method. The aim of this study was to compare environmental and clinical isolates with respect to their susceptibility, and assess the potential implications for therapy of isolates encountered in different environments. To our knowledge, this is the first report comparing antifungal susceptibility profiles of Aspergillus collected from different environmental sources (poultries, swineries, beach sand, and hospital environment). Significant differences were found in the distribution of the different species sections for the different sources. Significant differences were also found in the susceptibility profile of the different Aspergillus sections recovered from the various sources. Clear differences were found between the susceptibility of clinical and environmental isolates for caspofungin, amphotericin B and posaconazole, with clinical isolates showing overall greater susceptibility, except for caspofungin. In comparison to clinical isolates, hospital environmental isolates showed significantly less susceptibility to amphotericin B and posaconazole. These data indicate that species section identity and the site from which the isolate was recovered influence the antifungal susceptibility profile, which may affect initial antifungal choices.

Mechanical properties, shrinkage stress, cuspal strain and fracture resistance of molars restored with bulk-fill composites and incremental filling technique

OBJECTIVES

To compare bulk-fill with incremental filling techniques for restoring large mesio-occlusal-distal (MOD) restorations.

METHODS

Seventy-five molars with MOD preparations were divided into five groups: Z350XT, incrementally filled with Filtek Z350XT and four bulk-fills-FBF/Z350XT, Filtek Bulk Fill/Filtek Z350XT; VBF/CHA, Venus Bulk Fill/Charisma Diamond; SDR/EST-X, SDR/Esthet-X HD; TEC, TetricEvoCeram Bulk Fill. Cuspal strains were measured using strain-gauges (n=10): CSt-Re, during restorative procedure; CSt-100N, during 100N occlusal loading; CSt-Fr, at fracture load. Before fracture load, teeth were load-cycled. Fracture resistance, fracture mode, and enamel cracks were recorded. The other five teeth were used for Elastic modulus (E) and Vickers hardness (VH). Post-gel shrinkage (Shr), diametral tensile strength (DTS) and compressive strength (CS) were determined (n=10). Shrinkage stresses were analyzed using finite element analysis.

RESULTS

SDR had similar CS values as TEC, lower than all other composites. CHA had similar DTS values as Z350XT, higher than all other composites. Z350XT had the highest mean Shr and SDR the lowest Shr. New enamel cracks and propagation was observed after the restoration, regardless of filling technique. Z350XT had lower fracture resistance than bulk-fill composite techniques. No significant differences in failure modes were found. E and VH were constant through the depth for all techniques. Bulk-filling techniques had lower stresses compared to Z350XT.

CONCLUSIONS

Flowable bulk-fill composites had lower mechanical properties than paste bulk-fill and conventional composites. All bulk-fill composites had lower post-gel shrinkage than conventional composite. Bulk-fill filling techniques resulted in lower cusp strain, shrinkage stress and higher fracture resistance.

CLINICAL SIGNIFICANCE

Using bulk-fill composites cause lower CSt wich indicates lower stress in restored tooth. Furthermore, bulk-fill composites have a higher fracture resistance. Therefore, clinicians may choose the bulk-fill composite to decrease undesirable effects of restoration while simplifying filling procedure.

Cutaneous infection by different Alternaria species in a liver transplant recipient

Fungal invasive infections are rare in general population but are an emergent cause of infection in the immunocompromized population, especially in the solid organ transplant recipients. Herein the authors report a clinical case of a liver transplanted patient suffering a cutaneous co-existent infection with A. alternata as well as A. infectoria.

To our knowledge this is the first case of cutaneous concomitant infection due to those two species reported not only in Portugal but also worldwide. The patient was treated with surgical excision of the lesions and oral itraconazol without relapse.

Molecular epidemiology of Aspergillus collected from cystic fibrosis patients

BACKGROUND

Aspergillus respiratory infection is a common complication in cystic fibrosis (CF) and is associated with loss of pulmonary function and allergic disease.

METHODS

Fifty-three Aspergillus isolates recovered from CF patients were identified to species by Internal Transcribed Spacer Region (ITS), β-tubulin, and calmodulin sequencing.

RESULTS

Three species complexes (Terrei, Nigri, and Fumigati) were found. Identification to species level gave a single Aspergillus terreus sensu stricto, one Aspergillus niger sensu stricto and 51 Aspergillus fumigatus sensu stricto isolates. No cryptic species were found.

CONCLUSIONS

To our knowledge, this is the first prospective study of Aspergillus species in CF using molecular methods. The paucity of non-A. fumigatus and of cryptic species of A. fumigatus suggests a special association of A. fumigatus sensu stricto with CF airways, indicating it likely displays unique characteristics making it suitable for chronic residence in that milieu. These findings could refine an epidemiologic and therapeutic approach geared to this pathogen.

Accessing indoor fungal contamination using conventional and molecular methods in Portuguese poultries

Epidemiological studies showed increased prevalence of respiratory symptoms and adverse changes in pulmonary function parameters in poultry workers, corroborating the increased exposure to risk factors, such as fungal load and their metabolites. This study aimed to determine the occupational exposure threat due to fungal contamination caused by the toxigenic isolates belonging to the complex of the species of Aspergillus flavus and also isolates from Aspergillus fumigatus species complex. The study was carried out in seven Portuguese poultries, using cultural and molecular methodologies. For conventional/cultural methods, air, surfaces, and litter samples were collected by impaction method using the Millipore Air Sampler. For the molecular analysis, air samples were collected by impinger method using the Coriolis μ air sampler. After DNA extraction, samples were analyzed by real-time PCR using specific primers and probes for toxigenic strains of the Aspergillus flavus complex and for detection of isolates from Aspergillus fumigatus complex. Through conventional methods, and among the Aspergillus genus, different prevalences were detected regarding the presence of Aspergillus flavus and Aspergillus fumigatus species complexes, namely: 74.5 versus 1.0 % in the air samples, 24.0 versus 16.0 % in the surfaces, 0 versus 32.6 % in new litter, and 9.9 versus 15.9 % in used litter. Through molecular biology, we were able to detect the presence of aflatoxigenic strains in pavilions in which Aspergillus flavus did not grow in culture. Aspergillus fumigatus was only found in one indoor air sample by conventional methods. Using molecular methodologies, however, Aspergillus fumigatus complex was detected in seven indoor samples from three different poultry units. The characterization of fungal contamination caused by Aspergillus flavus and Aspergillus fumigatus raises the concern of occupational threat not only due to the detected fungal load but also because of the toxigenic potential of these species.

Routine screening of harmful microorganisms in beach sands: implications to public health

Beaches worldwide provide recreational opportunities to hundreds of millions of people and serve as important components of coastal economies. Beach water is often monitored for microbiological quality to detect the presence of indicators of human sewage contamination so as to prevent public health outbreaks associated with water contact. However, growing evidence suggests that beach sand can harbor microbes harmful to human health, often in concentrations greater than the beach water. Currently, there are no standards for monitoring, sampling, analyzing, or managing beach sand quality. In addition to indicator microbes, growing evidence has identified pathogenic bacteria, viruses, and fungi in a variety of beach sands worldwide. The public health threat associated with these populations through direct and indirect contact is unknown because so little research has been conducted relating to health outcomes associated with sand quality. In this manuscript, we present the consensus findings of a workshop of experts convened in Lisbon, Portugal to discuss the current state of knowledge on beach sand microbiological quality and to develop suggestions for standardizing the evaluation of sand at coastal beaches. The expert group at the "Microareias 2012" workshop recommends that 1) beach sand should be screened for a variety of pathogens harmful to human health, and sand monitoring should then be initiated alongside regular water monitoring; 2) sampling and analysis protocols should be standardized to allow proper comparisons among beach locations; and 3) further studies are needed to estimate human health risk with exposure to contaminated beach sand. Much of the manuscript is focused on research specific to Portugal, but similar results have been found elsewhere, and the findings have worldwide implications.

Fracture resistance and stress distribution of simulated immature teeth after apexification with mineral trioxide aggregate

AIM

To evaluate the effect of adhesive restorations on fracture resistance and stress distribution in teeth with simulated immature apices and apical plugs of mineral trioxide aggregate (MTA).

METHODOLOGY

Sixty bovine incisors were sectioned 8 mm above and 12 mm below the cemento-enamel junction (CEJ). The root canal was enlarged using a diamond bur, resulting in remaining root canal walls with 0.1-0.2 mm of thickness. A 5-mm apical plug of MTA was placed and the teeth were restored according to the following groups: GP--the root canal was filled with gutta-percha and endodontic sealer; CR--the root canal was filled with light-cured composite resin inserted incrementally; FP--a fibre post was cemented into the root canal; and RFP--the fibre post was relined with composite resin prior to the cementation into the root canal. A load was applied on the crown of all teeth at 135° to their long axis until fracture. Data was analysed by one-way anova and SNK tests (α = 0.05), whilst the fracture pattern was evaluated according to the position of the fracture. Stress distributions in the restored teeth were verified by finite element analysis.

RESULTS

Teeth restored with fibre posts and relined fibre posts were associated with the highest fracture resistance, whilst the GP group had the lowest values. GP and RC groups had similar fracture resistance values (P = 0.109). All fractures types involved the cervical and middle thirds of roots. The GP model had high levels of stress concentration in the cervical and middle thirds of roots. No difference was found amongst the stress concentration in the RC, FP and RFP models.

CONCLUSION

Restorative protocols alter the fracture resistance and stress distribution of immature teeth after placement of MTA apical plugs.

Occupational exposure to aflatoxin B1: the case of poultry and swine production

Although there is an abundance of literature concerning the ingestion of food contaminated with aflatoxin B1 (AFB1), only a small number of studies explore mycotoxin exposure in occupational settings. Taking this into consideration, our study was developed with the intention of elucidating whether there is occupational exposure to AFB1 in Portuguese poultry and swine production facilities. A specific biomarker was used to assess exposure to AFB1. A total of 45 workers (34 from poultry farms; 11 from swine production facilities) participated in this study, providing blood samples. Additionally, a control group (n=30) composed of subjects without any type of contact with agricultural activity was considered. All participants signed a consent form and were provided with the study protocol. Eighteen poultry workers (58.6%) and six workers from the swine production facilities (54.5%) showed detectable levels of AFB1. In the control group, the AFB1 values were all below 1 ng/ml. No significant differences in AFB1 levels in serum between workers from poultry and swine farms were found. Poultry workers, however, showed the highest serum levels and a significant statistical difference between this group and the control group was found. Results suggest that exposure to AFB1 by inhalation occurs in both occupational settings representing an additional risk that needs to be recognised, assessed and prevented.

Occupational exposure to aflatoxin B1 in swine production and possible contamination sources

Although the adverse health consequences of ingestion of food contaminated with aflatoxin B1 (AFB1) are known, relatively few studies are available on the adverse effects of exposure in occupational settings. Taking this into consideration, our study was developed aiming to elucidate the possible effects of occupational exposure to AFB1 in Portuguese swine production facilities using a specific biomarker to assess exposure to AFB1. In total, 28 workers participated in this study, providing blood samples, and a control group (n = 30) was composed of subjects without any type of agricultural activity. Fungal contamination was also studied by conventional methods through air, surfaces, and new and used floor coverage. Twenty-one workers (75%) showed detectable levels of AFB1 with values ranging from <1 ng/ml to 8.94 ng/ml and with a mean value of 1.91 ± 1.68 ng/ml. In the control group, the AFB1 values were all below 1 ng/ml. Twelve different Aspergillus species were identified. Aspergillus versicolor presented the highest airborne spore counts (3210 CFU/m3) and was also detected in higher values in surfaces (>300 CFU/cm2). Data indicate that exposure to AFB1 occurs in swine barns, and this site serves as a contamination source in an occupational setting.

Fungal contamination in swine: a potential occupational health threat

Poor air quality in a pig-confinement building may potentially place farmers at higher health risk than other workers for exposure to airborne pollutants that may reach infectious levels. The aim of this study was to assess worker exposure to fungi in indoor environments in Portuguese swine buildings. Air samples from 7 swine farms were collected at a flow rate of 140 L/min, at 1 m height, onto malt extract agar supplemented with chloramphenicol (MEA). Surfaces samples of the same indoor sites were obtained by swabbing the surfaces. Samples from the floor covering were also collected from four of seven swine farms. All collected samples were incubated at 27°C for 5-7 days. After lab processing and incubation of obtained samples, quantitative colony-forming units (CFU)/m(3), CFU/cm(2), and CFU/g and qualitative results were determined with identification of isolated fungal species. Aspergillus versicolor was the most frequent species found in air (21%), followed by Scopulariopsis brevicaulis (17%) and Penicillium sp. (14%). Aspergillus versicolor was also the most frequent species noted on surfaces (26.6%), followed by Cladosporium sp. (22.4%) and Scopulariopsis brevicaulis (17.5%). Chrysosporium was the most frequently found genera in the new floor covering (38.5%), while Mucor was the most prevalent genera (25.1%) in used floor covering. Our findings corroborate a potential occupational health threat due to fungi exposure and suggest the need for a preventive strategy.

Dermatomycosis in lower limbs of diabetic patients followed by podiatry consultation

BACKGROUND

Diabetic patients are particularly susceptible to fungal infections due to modifications that occur in their immunological system. These modifications compromise natural defences, such as skin and nails, especially from lower limbs.

AIMS

Assessing the presence of dermatomycosis in lower limbs of Portuguese diabetic patients followed on Podiatry consultation. Determination of possible predisposing factors and the most frequent fungal species associated with the cases are included in the study.

METHODS

A six-month prospective study was carried out in 163 diabetic patients with signs and symptoms of dermatomycosis followed by Podiatry at the Portuguese Diabetes Association in Lisbon. Samples from the skin and/or nails of the lower limbs were collected and demographic and clinical data of those patients were recorded.

RESULTS

Trichophyton rubrum was the most frequently isolated dermatophyte (12.1%), followed by Trichophyton mentagrophytes (7.7%) and Trichophyton tonsurans (4.4%). Our study showed positive associations between type 2 diabetes and the presence of dermatomycosis in the studied population (p=0.013); this association was also shown between the occurrence of dermatomycosis and the localization of the body lesion (p=0.000). No other predisposing factor tested was positively associated with infection (p>0.05).

CONCLUSIONS

Data on superficial fungal infections in diabetic patients are scarce in Portugal. This study provides information on the characterization of dermatomycosis in lower limbs of diabetic patients.

Occupational exposure to Aspergillus by swine and poultry farm workers in Portugal

Aspergillus is among a growing list of allergens that aggravate asthmatic responses. Significant pulmonary pathology is associated with Aspergillus-induced allergic and asthmatic lung disease. Environments with high levels of exposure to fungi are found in animal production facilities such as for swine and poultry, and farmers working with these are at increased risk for occupational respiratory diseases. Seven Portuguese poultry and seven swine farms were analyzed in order to estimate the prevalence, amount, and distribution of Aspergillus species, as well as to determine the presence of clinical symptoms associated with asthma and other allergy diseases in these highly contaminated settings. From the collected fungal isolates (699), an average incidence of 22% Aspergillus was detected in poultry farms, while the prevalence at swine farms was 14%. The most frequently isolated Aspergillus species were A. versicolor, A. flavus, and A. fumigatus. In poultry farms, A. flavus presented the highest level of airborne spores (>2000 CFU/m³), whereas in swine farms the highest was A. versicolor, with an incidence fourfold greater higher than the other mentioned species. Eighty workers in these settings were analyzed, ranging in age from 17 to 93 yr. The potentially hazardous exposure of poultry workers to mold allergens using sensitization markers was evaluated. Although no significant positive association was found between fungal contamination and sensitization to fungal antigens, a high incidence of respiratory symptoms in professionals without asthma was observed, namely, wheezing associated with dyspnea (23.8%) and dyspnea after strenuous activities (12.3%), suggesting underdiagnosed respiratory disturbances. Further, 32.5% of all exposed workers noted an improvement of respiratory ability during resting and holidays. From all the analyzed workers, seven were previously diagnosed with asthma and four reported the first attack after the age of 40 yr, which may be associated with their occupational exposure. Some of the fungi, namely, the Aspergillus species detected in this study, are known to induce hypersensitivity reactions in humans. This study confirmed the presence and distribution of Aspergillus in Portuguese poultry and swine farms, suggesting a possible occupational health problem and raising the need for preventive and protective measures to apply to avoid exposure in both occupational settings.

Indoor air quality in Portuguese archives: a snapshot on exposure levels

Indoor air quality recently entered legislation in Portugal. Several parameters must be evaluated and kept within limits in order to obtain a certification for air quality and energy consumption. Certification parameters were analyzed in two Portuguese archives in order to assess indoor air quality both for people attending or working on these premises and for maintenance of a written heritage that must be retained for future generations. Carbon monoxide (CO) and carbon dioxide (CO₂), formaldehyde, and fungal counts were kept within stipulated limits. Relative humidity (RH), volatile organic compounds (VOC), particulate matter (PM₁₀), and ozone (O₃) showed values above legislated levels and justified the implementation of corrective measures. In terms of conservation, studies on the limit values are still needed, but according to the available international guidelines, some of the analyzed parameters such as PM₁₀, O₃, and RH were also above desirable values. Corrective measures were proposed to these institutions. Although this study was only of a short duration, it proved valuable in assessing potential eventual problems and constitutes the first Portuguese indoor air quality assessment taking into consideration both aspects of an archive such as human health and heritage safekeeping.

Fungal contamination of poultry litter: a public health problem

Although numerous studies have been conducted on microbial contaminants associated with various stages related to poultry and meat products processing, only a few reported on fungal contamination of poultry litter. The goals of this study were to (1) characterize litter fungal contamination and (2) report the incidence of keratinophilic and toxigenic fungi presence. Seven fresh and 14 aged litter samples were collected from 7 poultry farms. In addition, 27 air samples of 25 litters were also collected through impaction method, and after laboratory processing and incubation of collected samples, quantitative colony-forming units (CFU/m³) and qualitative results were obtained. Twelve different fungal species were detected in fresh litter and Penicillium was the most frequent genus found (59.9%), followed by Alternaria (17.8%), Cladosporium (7.1%), and Aspergillus (5.7%). With respect to aged litter, 19 different fungal species were detected, with Penicillium sp. the most frequently isolated (42.3%), followed by Scopulariopsis sp. (38.3%), Trichosporon sp. (8.8%), and Aspergillus sp. (5.5%). A significant positive correlation was found between litter fungal contamination (CFU/g) and air fungal contamination (CFU/m³). Litter fungal quantification and species identification have important implications in the evaluation of potential adverse health risks to exposed workers and animals. Spreading of poultry litter in agricultural fields is a potential public health concern, since keratinophilic (Scopulariopsis and Fusarium genus) as well as toxigenic fungi (Aspergillus, Fusarium, and Penicillium genus) were isolated.