Microextraction techniques for occupational biological monitoring: Basic principles, current applications and future perspectives

The application of green microextraction techniques (METs) is constantly being developed in different areas including pharmaceutical, forensic, food and environmental analysis. However, they are less used in biological monitoring of workers in occupational settings. Developing valid extraction methods and analytical techniques for the determination of occupational indicators plays a critical role in the management of workers' exposure to chemicals in workplaces. Microextraction techniques have become increasingly important because they are inexpensive, robust and environmentally friendly. This study aimed to provide a comprehensive review and interpret the applications of METs and novel sorbents and liquids in biological monitoring. Future perspectives and occupational indicators that METs have not yet been developed for are also discussed.

Mycotoxins in Vegetable Oils: A Review of Recent Developments, Current Challenges and Future Perspectives in Sample Preparation, Chromatographic Determination, and Analysis of Real Samples

Mycotoxins are toxic compounds that are formed as secondary metabolites by some fungal species that contaminate crops during pre- and postharvest stages. Exposure to mycotoxins can lead to adverse health effects in humans, such as carcinogenicity, mutagenicity, and teratogenicity. Hence, there is a need to develop analytical methods for their determination in vegetable oils that possess high sensitivity and selectivity. In the current review (116 references), the recent developments, current challenges, and perspectives in sample preparation techniques and chromatographic determination are summarized. It is impressive that current sample preparation techniques such as dispersive liquid-liquid microextraction (DLLME), quick, easy, cheap, rugged, and safe method (QuEChERS) and solid phase extraction (SPE) have exhibited high extraction recoveries and minimal matrix effects. However, a few studies have reported signal suppression or enhancement. Regarding chromatographic techniques, high sensitivity and selectivity have been reported by liquid chromatography coupled to fluorescence detection, tandem mass spectrometry, or high-resolution mass spectrometry. Furthermore, current challenges and perspectives in this field are tentatively proposed.

Surfactant-enhanced air-agitation liquid-liquid microextraction of polycyclic aromatic hydrocarbons from edible oil using magnetic deep eutectic solvent prior to HPLC determination

Herein, an air-agitation liquid-liquid microextraction procedure was developed for the extraction of several polycyclic aromatic hydrocarbons from edible oil samples. In this study, the extraction procedure was achieved using a new magnetic deep eutectic solvent as the extraction solvent, in which there was no need for centrifugation. To enhance the rate of extraction of the analytes from the samples, the method was promoted by the use of surfactant addition. The extracted analytes were determined by high-performance liquid chromatography with a diode array detector. The influence of various parameters on the extraction efficiency was studied by response surface methodology using a central composite design. Under optimal conditions, linear calibration curves for the target analytes were achieved in the range of 0.43-250 ng g-1. The limits of detection and quantification were in the ranges of 0.04-0.13 and 0.13-0.43 ng g-1, respectively. The repeatability of the method in terms of intra- and inter-day precision was ≤4.7% and ≤6.7%, respectively. The extraction recovery of the method ranged from 75 to 88%. The obtained results show that the proposed method is efficient for the analysis of the target analytes in various oil samples without obvious matrix effects. Pyrene was found in olive oil at a concentration of 42 ng g-1.

Solid supports and supported liquid membranes for different liquid phase microextraction and electromembrane extraction configurations. A review

Liquid phase microextraction (LPME) and electromembrane microextraction (EME) can be considered as two of the most popular techniques in sample treatment today. Both techniques can be configurated as membrane-assisted techniques to carry out the extraction. These supports provide the required geometry and stability on the contact surface between two phases (donor and acceptor) and improve the reproducibility of sample treatment techniques. These solid support pore space, once is filled with organic solvents, act as a selective barrier acting as a supported liquid membrane (SLM). The SLM nature is a fundamental parameter, and its selection is critical to carry out successful extractions. There are numerous SLMs that have been successfully employed in a wide variety of application fields. The latter is due to the specificity of the selected organic solvents, which allows the extraction of compounds of a very different nature. In the last decade, solid supports and SLM have evolved towards "green" and environmentally friendly materials and solvents. In this review, solid supports implemented in LPME and EME will be discussed and summarized, as well as their applications. Moreover, the advances and modifications of the solid supports and the SLMs to improve the extraction efficiencies, recoveries and enrichment factors are discussed. Hollow fiber and flat membranes, including microfluidic systems, will be considered depending on the technique, configuration, or device used.

Photocatalytic degradation of bisphenol-A (BPA) over titanium dioxide, and determination of its by-products by HF-LPME/GC-MS

In this work, analytical strategies were developed based on the technique of hollow fiber liquid-phase microextraction and chromatographic methods (LC-UV and GC/MS). These methods allowed the identification of the main Bisphenol-A by-products applying heterogeneous photocatalysis in water samples. BPA degradation in this study was in the order of 90%, and the conditions used in the HF-LPME were optimized through 2³ factorial design (6 cm fiber length, stirring speed of 750 rpm, and an extraction time of 30 min). Using a HF-LPME/GC-MS analytical strategy, it was possible to identify six by-products of BPA photodegradation, two of which have not been reported in the literature so far. This knowledge was quite important since the degradation can lead to the formation of more toxic and persistent by-products than the BPA. With the Toxtree software, three degradation products were found to be persistent to the environment, in addition to BPA; however, in 360 minutes of reaction, chromatographic peaks of the precursors were not identified, suggesting that there may have been a total degradation of these compounds. The results showed a great application potential of a miniaturized extraction technique to extract and pre-concentrate the degradation products of emerging contaminants.

Amphetamine, methamphetamine, and MDMA in hair samples from a rehabilitation facility: Validation and applicability of HF-LPME-GC-MS

INTRODUCTION

It is known that drug abuse jeopardizes economic and social development. Toxicological analyses can guide prevention and treatment strategies in rehabilitation facilities. The current greatest challenge is finding easily adaptable and less costly sensitive methods that meet the principles of green chemistry. Hair, as a biological matrix, has several advantages, and its ability to detect consumption for longer periods keeping the matrix stable and unaltered stands out. This manuscript addresses the use of a miniaturized technique in an alternative matrix, by making use of a reduced amount of solvents to quantify amphetamines, aiming to guide prevention and treatment strategies in rehabilitation facilities.

METHODS

A Hollow Fiber Liquid-phase Microextraction (HF-LPME) technique for extracting amphetamines from hair samples with Gas Chromatography-Mass Spectrometry (CG-MS) was validated, adapted, and applied to ten samples from patients of a rehabilitation facility.

RESULTS

The technique proved to be sensitive, accurate, precise, and not affected by interference from the biological matrix and the linear range for the analytes was 0.2 to 20 ng mg ^-1. The three analytes were quantified in the samples analyzed. It is worth stressing that the patients were young.

CONCLUSION

The HF-LPME-GC-MS technique complied with the principles of green chemistry, and proved to be a sensitive technique, adaptable to the routine of common laboratories. Validation in the analysis phase with authentic samples, thus, showed that it can be an important tool for preventing and controlling drug addiction.

A Review of Extraction Methods and Analytical Techniques for Styrene and its Metabolites in Biological Matrices

We reviewed the toxicokinetics of styrene to introduce reliable surrogates for biological monitoring of styrene workers. Also, extraction techniques and analytical methods for styrene and its metabolites have been discussed. Sample preparation is the main bottleneck of the analytical techniques for styrene and its metabolites. While some microextraction methods have been developed to overcome such drawbacks, some still have limitations such as long extraction time, fiber swelling and breakage, and the cost and the limited lifetime of the fiber. Among all, microextraction by packed sorbents coupled with high performance liquid chromatography with ultraviolet detection (MEPS-HPLC-UV) can be the method of choice for determining styrene metabolites. Few studies investigated unchanged styrene in breath samples. Chemical determination in exhaled breath provides new insights into organ toxicity in workers with inhalation exposures and can be considered as a fascinating tool in risk assessment strategies. Taking blood samples is invasive and less accepted by workers than other samples. In contrast, breath analysis is the most attractive method for workers because breath samples are easy to collect and non-invasive, and does not require worker transfer to health facilities. Therefore, developing selective and sensitive methods for determining styrene in breath samples is recommended for future studies.

Application of an improved hollow fiber liquid phase microextraction technique coupled to LC-MS/MS to studying migration of fluorescent whitening agents from plastic food contact materials

In this paper, a new hollow fiber liquid-phase microextraction method was developed to improve the extraction of five fluorescent whitening agents that migrated from plastics food contact materials. Influencing factors, such as the types of membrane, the extraction solvent, the stirring speed, the addition of salt ion, and extraction time, were investigated in detail. Under the optimal conditions, high enrichment factors (71-205) can be obtained with 15 μL extraction solvent. The new method is advantageous; the polypropylene hollow fiber membrane modified by sepiolite nanoparticles had excellent solvent binding force and mass transfer effect compared with the conventional extraction technique. The extracts were analyzed by high performance liquid chromatography-tandem mass spectrometry, the limits of detection were 0.3 or 0.9 ng kg^-1 with good correlation coefficients (r² ≥ 0.9940) for the five fluorescent whitening agents. The intra-day and inter-day recoveries ranged between 82.6% and 112%, with a relative standard deviation of less than 12%. The established method was successfully applied to the analysis of fluorescent whitening agent migration from four types of plastic food contact materials immersed in three food simulants.

Recent advances in analysis of bisphenols and their derivatives in biological matrices

Biomonitoring is a very useful tool to evaluate human exposure to endocrine-disrupting compounds (EDCs), like bisphenols (BPs), which are widely used in the manufacture of plastics. The development of reliable analytical methods is key in the field of public health surveillance to obtain biomonitoring data to determine what BPs are reaching people's bodies. This review discusses recent methods for the quantitative measurement of bisphenols and their derivatives in biological samples like urine, blood, breast milk, saliva, and hair, among others. We also discuss the different procedures commonly used for sample treatment, which includes extraction and clean-up, and instrumental techniques currently used to determine these compounds. Sample preparation techniques continue to play an important role in the analysis of complex matrices, for liquid matrices the most commonly employed is solid-phase extraction, although microextraction techniques are gaining importance in this field, and for solid samples ultrasound-assisted extraction. The main instrumental techniques used are liquid and gas chromatography coupled with mass spectrometry. Finally, we present data on the main parameters obtained in the validation of the revised methods. This review focuses on various methods developed and applied for trace analysis of bisphenols, their conjugates, halogenated derivatives, and diglycidyl ethers in biological samples to enable the required selectivity and sensitivity. For this purpose, a review is carried out of the most recent relevant publications from 2016 up to present.

Solvent bar microextraction combined with HPLC-DAD for simultaneous determination of diuretics in human urine and plasma samples

BACKGROUND

A simple and powerful microextraction procedure, the solvent bar microextraction (SBME), was used for the simultaneous determination of two diuretics, furosemide and spironolactone in human urine and plasma samples, using high-performance liquid chromatography coupled with diode array detection (HPLC-DAD).

METHODS

The appropriate amount (2 µL) of 1-octanol as an organic solvent confined within (2.5 cm) of a porous hollow fiber micro-tube, sealed at both ends was used for this procedure. The conditions for the SBME were optimized in water and the analytical performance were examined in spiked human urine and plasma samples.

RESULTS

The optimized method exhibited good linearity (R2 > 0.997) over the studied range of higher than 33 to 104 µg L-1 for furosemide and spironolactone in urine and plasma samples, illustrating a satisfactory precision level with RSD values between 2.1% and 9.1%.

DISCUSSION

The values of the limits of detection were found to be in the range of 6.39 to 9.67 µg L-1, and extraction recovery˃ 58.8% for both diuretics in urine and plasma samples. The applicability and effectiveness of the proposed method for the determination of furosemide and spironolactone in patient urine samples were tested.

CONCLUSION

In comparison with reference methods, the attained results demonstrated that SBME combined with HPLC-DAD was proved to be simple, inexpensive, and promising analytical technology for the simultaneous determination of furosemide and spironolactone in urine and plasma samples.

New Trend in the Extraction of Pesticides from the Environmental and Food Samples Applying Microextraction Based Green Chemistry Scenario: A Review

This review focused on the green microextraction methods used for the extraction of pesticides from the environmental and food samples. Microextraction techniques have been explored and applied in various fields of analytical chemistry since its beginning, as evinced by the numerous reviews published. The success of any technique in science and technology is measured by the simplicity, environmentally friendly, and its applications; and the microextraction technique is highly successive. Deliberations were attentive to studies where efforts have been made to validate the methods through the inter-laboratory comparison study to assess the analytical performance of microextraction techniques against conventional methods. Succinctly, developed microextraction methods are shown to impart significant benefits over conventional techniques. Provided that the analytical community continues to put forward attention and resources into the growth and validation of the microextraction technique, a promising future for microextraction is forecasted.

Hollow fiber liquid-phase microextraction combined with supercritical fluid chromatography coupled to mass spectrometry for multiclass emerging contaminant quantification in water samples

The hollow fiber liquid-phase microextraction allows highly selective concentration of organic compounds that are at trace levels. The determination of those analytes through the supercritical fluid chromatography usage is associated with many analytical benefits, which are significantly increased when it is coupled to a mass spectrometry detector, thus providing an extremely sensitive analytical technique with minimal consumption of organic solvents. On account of this, a hollow fiber liquid-phase microextraction technique in two-phase mode combined with supercritical fluid chromatography coupled to mass spectrometry was developed for quantifying 19 multiclass emerging contaminants in water samples in a total chromatographic time of 5.5 min. The analytical method used 40 μL of 1-octanol placed in the porous-walled polypropylene fiber as the acceptor phase, and 1 L of water sample was the donor phase. After extraction and quantification techniques were optimized in detail, a good determination coefficient (r² > 0.9905) in the range of 0.1 to 100 μg L^-1, for most of the analytes, and an enrichment factor in the range of 7 to 28,985 were obtained. The recovery percentage (%R) and intraday precision (%RSD) were in the range of 80.80-123.40%, and from 0.48 to 16.89%, respectively. Limit of detection and quantification ranged from 1.90 to 35.66 ng L^-1, and from 3.41 to 62.11 ng L^-1, respectively. Finally, the developed method was successfully used for the determination of the 19 multiclass emerging contaminants in superficial and wastewater samples.

Miniaturized sample preparation techniques and ambient mass spectrometry as approaches for food residue analysis

Analytical methods such as liquid chromatography (LC) and mass spectrometry (MS) are widely used techniques for the analyses of different classes of compounds. This is due to their highlighted capacity for separating and identifying components in complex matrices such food samples. However, in most cases, effective analysis of the target analyte becomes challenging due to the complexity of the sample, especially for quantification of trace concentrations. In this case, miniaturized sample preparation methods have been used as a strategy for analysis of complex matrices. This involves removing the interferents and concentrating the analytes in a sample. These methods combine simplicity and effectiveness and given their miniaturized scale, they are in accordance with green chemistry precepts. Besides, ambient mass spectrometry represents a new trend in fast and rapid analyses, especially for qualitative and screening analysis. However, for complex matrix analyses, sample preparation is still a difficult step and the miniaturized sample preparation techniques show great potential for an improved and widespread use of ambient mass spectrometry techniques. . This review aims to contribute as an overview of current miniaturized sample preparation techniques and ambient mass spectrometry methods as different approaches for selective and sensitive analysis of residues in food samples.

Modern microextraction techniques for natural products

Natural product analysis has gained wide attention in recent years, especially for herbal medicines, which contain complex ingredients and play a significant clinical role in the therapy of numerous diseases. The constituents of natural products are usually found at low concentrations, and the matrices are complex. Thus, the extraction of target compounds from natural products before analysis by analytical instruments is very significant for human health and its wide application. The commonly used traditional extraction methods are time-consuming, using large amounts of sample and organic solvents, as well as expensive and inefficient. Recently, microextraction techniques have been used for natural product extraction to overcome the disadvantages of conventional extraction methods. In this paper, the successful applications of and recent developments in microextraction techniques including solvent-based and sorbent-based microextraction methods, in natural product analysis in recent years, especially in the last 5 years, are reviewed for the first time. Their features, advantages, disadvantages, and future development trends are also discussed.

Selective electromembrane extraction and sensitive colorimetric detection of copper(II)

In this study, an extremely effective electromembrane extraction (EME) method was developed for the selective extraction of Cu(II) followed by Red-Green-Blue (RGB) detection. The effective parameters optimized for the extraction efficiency of EME include applied voltage, extraction time, supported liquid membrane (SLM) composition, pH of acceptor/donor phases, and stirring rate. Under optimized conditions, Cu(II) was extracted from a 3 mL aqueous donor phase to 8 µL of 100 mM HCl acceptor solution through 1-octanol SLM using an applied voltage of 50 V for 15 min. The proposed method provides a working range of 0.1–0.75 µg·mL−1 with 0.03 µg·mL−1 limit for detection. Finally, the developed technique was applied to different environmental water samples for monitoring environmental pollution. Obtained relative recoveries were within the range of 93–106%. The relative standard deviation (RSD) and enhancement factor (EF) were found to be ≤4.8% and 100 respectively. We hope that this method can be introduced for quantitative determination of Cu(II) as a fast, simple, portable, inexpensive, effective, and precise procedure.

Hollow fiber-based liquid phase microextraction followed by analytical instrumental techniques for quantitative analysis of heavy metal ions and pharmaceuticals

Hollow-fiber liquid-phase microextraction (HF-LPME) and electromembrane extraction (EME) are miniaturized extraction techniques, and have been coupled with various analytical instruments for trace analysis of heavy metals, drugs and other organic compounds, in recent years. HF-LPME and EME provide high selectivity, efficient sample cleanup and enrichment, and reduce the consumption of organic solvents to a few micro-liters per sample. HF-LPME and EME are compatible with different analytical instruments for chromatography, electrophoresis, atomic spectroscopy, mass spectrometry, and electrochemical detection. HF-LPME and EME have gained significant popularity during the recent years. This review focuses on hollow fiber based techniques (especially HF-LPME and EME) of heavy metals and pharmaceuticals (published 2017 to May 2019), and their combinations with atomic spectroscopy, UV-VIS spectrophotometry, high performance liquid chromatography, gas chromatography, capillary electrophoresis, and voltammetry.

Green pre-concentration techniques during pesticide analysis in food samples

The ever-increasing demand for determining pesticides at low concentration levels in different food matrices requires a preliminary step of pre-concentration which is considered a crucial stage. Recently, the parameter of "greenness" during sample pre-concentration of pesticides in food matrices is as important as selectivity in order to avoid using harmful organic solvents during sample preparation. Developing new green pre-concentration techniques is one of the key subjects. Thus, to reduce the impact on the environment during trace analysis of pesticides in food matrices, new developments in pre-concentration have gone in three separate directions: the search for more environmentally friendly solvents, miniaturization and development of solvent-free pre-concentration techniques. Eco-friendly solvents such as supercritical fluids, ionic liquids and natural deep eutectic solvents have been developed for use as extraction solvents during pre-concentration of pesticides in food matrices. Also, miniaturized pre-concentration techniques such as QuEChERS, dispersive liquid-liquid micro-extraction and hollow-fiber liquid-phase micro-extraction have been used during trace analysis of pesticides in food samples as well as solvent-free techniques such as solid-phase micro-extraction and stir bar sorptive extraction. All these developments which are aimed at ensuring that pesticide pre-concentration in different food matrices is green are critically reviewed in this paper.

Preparation and application of guanidyl-functionalized graphene oxide-grafted silica for efficient extraction of acidic herbicides by Box-Behnken design

A highly selective and efficient extraction material was synthesized through the functionalization of guanidyl onto the graphene oxide-grafted silica via a simple chemical modification, which was designed and proposed to improve the enrichment capacity for acidic herbicides. The extraction material was confirmed by scanning electron microscopy, Fourier transform infrared spectrometry, X-ray photoelectron spectrometry, thermal gravimetric analyzer and zeta potential analysis. Theoretical adsorption energies, static- and dynamic-state binding experiments, and comparative experiments with various adsorbents were investigated to elucidate the adsorption mechanism. The introduction of guanidyl endowed the sorbent with stronger Lewis base property and electron-donating ability, hence, excellent extraction recoveries for acidic herbicides could be obtained. Besides, electrostatic and π-π interactions were considered as two major driving impetuses in the adsorption process. Single-factor experiment and response surface methodology were utilized for the optimization of extraction and desorption conditions. Under the optimized conditions, the wide linearities were obtained with correlation coefficients ranging from 0.9904 to 0.9980, and the method detection limits were in the range of 0.5-2 μg L^-1. The relative standard deviation values of the recoveries of five different extractions were 3.0-7.1%. Coupled with high performance liquid chromatography, the as-proposed method was successfully applied to detect five acidic herbicides in Lycium barbarum (Goji). It turned out that the proposed method provided a promising perspective for the selective extraction and determination of polar acidic compounds in complex samples.

Recent Modifications and Validation of QuEChERS-dSPE Coupled to LC-MS and GC-MS Instruments for Determination of Pesticide/Agrochemical Residues in Fruits and Vegetables: Review

Fruits and vegetables constitute a major type of food consumed daily apart from whole grains. Unfortunately, the residual deposits of pesticides in these products are becoming a major health concern for human consumption. Consequently, the outcome of the long-term accumulation of pesticide residues has posed many health issues to both humans and animals in the environment. However, the residues have previously been determined using conventionally known techniques, which include liquid-liquid extraction, solid-phase extraction (SPE) and the recently used liquid-phase microextraction techniques. Despite the positive technological effects of these methods, their limitations include; time-consuming, operational difficulty, use of toxic organic solvents, low selective property and expensive extraction setups, with shorter lifespan of instrumental performances. Thus, the potential and maximum use of these methods for pesticides residue determination has resulted in the urgent need for better techniques that will overcome the highlighted drawbacks. Alternatively, attention has been drawn recently towards the use of quick, easy, cheap, effective, rugged and safe technique (QuEChERS) coupled with dispersive solid-phase extraction (dSPE) to overcome the setback challenges experienced by the previous technologies. Conclusively, the reviewed QuEChERS-dSPE techniques and the recent cleanup modifications justifiably prove to be reliable for routine determination and monitoring the concentration levels of pesticide residues using advanced instruments such as high-performance liquid chromatography, liquid chromatography-mass spectrometry and gas chromatography-mass spectrometry.