Three dimensional visualisation of velocity profiles in the normal porcine pulmonary trunk

Microemboli in aortic valve replacement

Microembolic signals (MES) can be detected in many recipients of mechanical aortic valve prostheses by transcranial Doppler ultrasound. The nature and etiology of these MES have remained unclear for a long time. The solid and gaseous nature of MES are discussed, as well as whether or not MES may reflect artifacts. Recently, the gaseous nature of these MES has been widely established. To understand the physics of bubble formation related to mechanical heart valve prostheses, it is necessary to discuss the different types of cavitation occurring at the prostheses and the conditions leading to the degassing of blood. We describe the history of transcranial Doppler ultrasound-techniques and the current techniques in the measurement of these signals. Furthermore, the possible clinical impact of MES, as well as strategies for the design of new prostheses and surgical alternatives to diminish their load are discussed.

A new dynamic three-dimensional digital color doppler method for quantification of pulmonary regurgitation: validation study in an animal model

OBJECTIVES

The purpose of the present study was to validate a newly developed three-dimensional (3D) digital color Doppler method for quantifying pulmonary regurgitation (PR), using an animal model of chronic PR.

BACKGROUND

Spectral Doppler methods cannot reliably be used to assess pulmonary regurgitation.

METHODS

In eight sheep with surgically created PR, 27 different hemodynamic states were studied. Pulmonary and aortic electromagnetic (EM) probes and meters were used to provide reference right ventricular (RV) forward and pulmonary regurgitant stroke volumes. A multiplane transesophageal probe was placed directly on the RV and aimed at the RV outflow tract. Electrocardiogram-gated and rotational 3D scans were performed for acquiring dynamic 3D digital velocity data. After 3D digital Doppler data were transferred to a computer workstation, the RV forward and pulmonary regurgitant flow volumes were obtained by a program that computes the velocity vectors over a spherical surface perpendicular to the direction of scanning.

RESULTS

Pulmonary regurgitant volumes and RV forward stroke volumes computed by the 3D method correlated well with those by the EM method (r = 0.95, mean difference = 0.51 +/- 1.89 ml/beat for the pulmonary regurgitant volume; and r = 0.91, mean difference = -0.22 +/- 3.44 ml/beat for the RV stroke volume). As a result of these measurements, the regurgitant fractions derived by the 3D method agreed well with the reference data (r = 0.94, mean difference = 2.06 +/- 6.11%).

CONCLUSIONS

The 3D digital color Doppler technique is a promising method for determining pulmonary regurgitant volumes and regurgitant fractions. It should have an important application in clinical settings.

The compliance of the porcine pulmonary artery depends on pressure and heart rate

1. The influence of mean pulmonary arterial pressure (mean Ppa) on dynamic (Cd) and pseudo-static compliance (Cps) of the pulmonary artery was studied at a constant and a changing heart rate. Cd is the change in cross-sectional area (CSA) relative to the change in Ppa throughout a heart cycle. Cps is the change in mean CSA relative to the change in mean Ppa. If Cd is known, pulmonary blood flow can be computed from the Ppa using a windkessel model. We investigated whether Cps can be interchanged with Cd. 2. In nine anaesthetized pigs, we determined the mean CSA and Cd of the pulmonary artery at various Ppa levels, ranging from approximately 30 to 10 mmHg, established by bleeding. Two series of measurements were carried out, one series at a spontaneously changing heart rate (n = 9) and one series at a constant heart rate (n = 6). To determine CSA a conductance method was used. 3. Cps depended on pressure. The mean CSA versus mean Ppa curves were sigmoid and steepest in the series with the increasing heart rate (established by bleeding). The CSA versus Ppa loop during a heart cycle, giving Cd, was approximately linear and almost closed. The Cd versus mean Ppa relationship was bell shaped. Its width was smaller if the heart rate increased during the series of measurements. The pressure, where Cd was maximum, was higher at higher heart rates. Furthermore, the maximum Cd was not affected by the heart rate. 4. Because the pulmonary artery constricts with increasing heart rate, Cps will be overestimated during procedures where heart rate increases. Cd should be determined on a beat-to-beat basis to calculate flow because it changes with mean pulmonary arterial pressure and heart rate.

The impact of ischemic heart disease on main pulmonary artery blood flow patterns: a comparison between magnetic resonance phase velocity mapping and transesophageal color Doppler

OBJECTIVE

To give a detailed evaluation on main pulmonary artery blood velocity patterns, in patients with ischemic heart disease and to provide recommendations for pulsed Doppler sample volume placement, in order to optimize cardiac output estimation.

METHODS

Using magnetic resonance phase and esophageal color Doppler velocity mapping in 12 patients with ischemic heart disease and undergoing coronary artery by-pass grafting, very similar data on pulmonary artery blood velocity patterns were provided for comparison with each other.

RESULTS

Peak blood velocities were located in the inferior half of the main pulmonary artery cross-sectional area. Early after peak systole the highest velocities shifted towards the superior/left (major curvature) with a simultaneous decrease in velocities inferiorly. The velocity decrease further evolved into retrograde flow to the inferior/right (minor curvature). This feature was significantly enhanced compared to earlier findings in healthy volunteers. The mean temporal blood velocity profiles were asymmetrically skewed, thereby giving unreliable cardiac output estimates based on single point Doppler blood velocity recordings. The error incurred may amount to more than 100% in extreme cases. According to our data, optimal assessment of cardiac output should be based on multiple sample volumes placed along the inferior/right to superior/left diameter.

CONCLUSIONS

MR-phase velocity mapping and multiplane transesophageal color Doppler recordings provided similar blood velocity patterns in patients with ischemic heart disease. The skewness of the mean temporal blood velocity profile is enhanced compared with healthy subjects, resulting in error in the assessment of CO by means of pulsed Doppler echocardiography. By using multiple Doppler sample volumes, the error can be minimized.

New semiautomated Doppler method for quantification of volumetric flow: intraoperative validation with multiplane transesophageal color Doppler imaging

We have validated a new semiautomated method for quantification of volumetric flow applied to multiplane transesophageal color Doppler mapping. This Doppler technique assumes only the incompressibility of the fluid and includes variations of flow area. By computing velocity vectors across a surface normal to the point of scanning, volumetric flow can be measured independently of the angle of incidence between the ultrasonic beam and the direction of blood flow. Mitral valvular flow rate was measured during surgery by transesophageal color Doppler echocardiography in 27 patients undergoing coronary artery bypass grafting at 45 sets of observations. The results were compared with those obtained by the thermodilution technique. The mean of the differences between the thermodilution technique and color Doppler echocardiography was 0.06 +/- 0.866 L/min for the mitral valvular flows (mean of differences [thermodilution-color Doppler] &/- 2 SDs of differences). Thus mitral valvular volumetric flow measured by this color Doppler method showed a close agreement to the thermodilution technique during surgery.

Where to place the Doppler sample volume in the human main pulmonary artery: evaluated from magnetic resonance phase velocity maps

OBJECTIVE

To give recommendations for the placement of Doppler sample volumes for blood flow assessment in the human main pulmonary artery.

METHODS

In 10 healthy volunteers MR-phase velocity measurements were obtained and computing of the mean temporal blood velocity data was performed to guide single point Doppler velocity recordings.

RESULTS

The mean temporal blood velocity profiles were consistently skewed with the lowest blood velocities towards the inferior/right vessel wall. Blood velocity indices (ratio of point to mean velocities, where a point equals a square of 4 pixels) varied considerably with the lowest indices located towards the inferior/right vessel wall. A centrally located fictive sample volume revealed an average blood velocity index value (average of all 10 subjects) of 1.08 (range 0.99-1.25; s.d. 0.08) where the central point was defined at maximum systole, and a value of 1.13 (range 0.97-1.34; s.d. 0.11) when the central point was defined in end-diastole. The mean of multiple sample volumes along the inferior/right to superior/left diameter revealed a blood velocity index of 1.01 (range 0.87-1.21; s.d. 0.09) in systole and 1.03 (range 0.87-1.19; s.d. 0.09) in diastole.

CONCLUSIONS

For practical clinical purposes, single point estimation of the mean blood velocity in the pulmonary artery should be performed centrally. The use of multiple sample volumes placed along the inferior/right to superior/left diameter improves the mean velocity estimate in healthy volunteers. Further studies should be conducted to reinforce the basis for Doppler velocity recording in the diseased human pulmonary artery as well as to investigate other important determinants of Doppler-derived CO, namely angle of insonation and assessment of the cross-sectional area.

Pulmonary blood flow profiles with reduced right ventricular function in lambs

The determinants of right ventricular (RV) performance with damaged RV free wall, such as occurs with RV infarction, are still unclear. Using 20-MHz Doppler ultrasound equipment, we investigated the changes in pulmonary blood flow velocity profiles before and after ligation of the right coronary artery. RV dp/dt, stroke volume, RV stroke work, aortic pressure and cardiac output decreased and central venous pressure rose after the ligation. The RV stroke work-end-diastolic pressure relationship indicated impaired RV function following ligation. We observed shortened acceleration time (65.0 +/- 15.1 vs 54.4 +/- 6.2 ms, P < 0.05) and reduced maximum velocity of forward flow (59.0 +/- 5.9 vs 52.5 +/- 7.6 cm/s, P < 0.05) after the ligation. Acceleration was interrupted earlier after ligation than before ligation. These alterations in flow are thought to be a consequence of the altered movement of the RV free wall and ventricular septum induced by RV infarction.

A new Doppler method for quantification of volumetric flow: in vivo validation using color Doppler

OBJECTIVES

This study was designed to assess the accuracy of a new Doppler method for quantification of volumetric flow in vivo.

BACKGROUND

Noninvasive assessment of volumetric flow through heart valves and the great vessels remains a clinical goal. We present a new method for quantification of volumetric flow based on color Doppler mapping that computes velocity vectors over a surface normal to the point of scanning. This Doppler technique assumes only the incompressibility of the fluid. The method is basically independent of the angle of incidence between the ultrasound beam and the direction of blood flow and includes variations of flow area.

METHODS

The color Doppler method was tested in seven anesthetized pigs by measuring pulmonary volumetric flows using multiplane Doppler echocardiography. The results were compared with those obtained by the thermodilution technique. In addition, volumetric flows across the mitral valve were determined in 10 normal volunteers by transthoracic Doppler echocardiography and compared with flows obtained with velocity-encoded magnetic resonance imaging (MRI).

RESULTS

The mean value of the differences between the thermodilution technique and color Doppler were -0.16 +/- 0.94 liter/min for pulmonary volumetric flows (mean value of differences for [Thermodilution-Color Doppler] +/- 2 SD of differences). The mean value of the differences between MRI and color Doppler were 0.21 +/- 0.83 liter/min for mitral valvular volumetric flows (mean value of differences for [MRI-Color Doppler] +/- 2 SD of differences).

CONCLUSIONS

The method showed close agreement with thermodilution and MRI for assessment of volumetric flow in vivo. It is therefore a noninvasive method with potential applications for cardiac output measurement and for quantification of volumetric flow of valvular insufficiency and restrictive lesions.

Three-dimensional visualization of velocity profiles in the human main pulmonary artery with magnetic resonance phase-velocity mapping

Detailed data on blood velocity fields in the normal human main pulmonary artery are an essential platform for discriminating physiologic from pathologic pulmonary flow patterns. Over the years, many studies have revealed quite inconsistent data mainly because of lack of suitable measuring techniques. By using combined cardiac- and respiratory-triggered magnetic resonance phase velocity mapping, very consistent data were obtained in 12 volunteers. In all subjects the location of the highest axial velocities was shifted from the inferior-right toward the superior-left part of the vessel area during the right ventricular contraction, with rapidly decreasing velocities to the inferior right evolving into retrograde flow in the deceleration phase. The mean temporal velocity profile was consistently skewed with a low flow region also toward the inferior-right vessel wall. The magnetic resonance phase shift method used in this study provided remarkably consistent high-quality data about human pulmonary artery velocity fields. This is most likely because of the use of combined cardiac and respiratory triggering.

Multiplane transesophageal Doppler echocardiographic measurements of the velocity profile in the human pulmonary artery

Eight healthy, unsedated volunteers were studied to introduce a new non-invasive method for detailed blood velocity measurements and to evaluate flow patterns in the human pulmonary artery during end-expiratory apnea. With a multiplane transesophageal ultrasonic probe, spectral Doppler velocity registration was performed in nine different spatial locations across the vessel area. The pulmonary trunk could be visualized in all patients. The mean temporal velocity profile was virtually flat despite an instantaneous skewness that rotated counterclockwise up to 180 degrees. Furthermore, our data indicate that a good estimate of the temporal and spatial mean velocity can be obtained from velocity recordings based on centrally placed sample volumes. This makes the future application of Doppler-based measurement of cardiac output in the pulmonary artery hopeful. The ability of multiplane transesophageal echocardiography to estimate the area of the elastic human pulmonary artery, however, has to be evaluated more extensively before the clinical importance of this tool for measurement of cardiac output can be established.