Effects of a high-phosphate diet on vascular calcification and abdominal aortic aneurysm in mice

AIM

Vascular aging is an important risk factor for cardiovascular diseases, including abdominal aortic aneurysm (AAA) and pathological aortic dilatation, playing a critical role in the morbidity and mortality of older adults. Vascular calcification, a phenotype of vascular aging, is frequently associated with AAA. However, this association remains unclear owing to the lack of animal models. This study investigated the effects of a high-phosphate diet (HPD), a prominent trigger of vascular calcification in AAA.

METHODS

Eight-week-old male mice were fed either a normal diet (ND; Ca 1.18%/P 1.07% = 1.10) or an HPD (Ca 1.23%/P 1.65% = 0.75) for 4 weeks. Subsequently, AAA was induced using CaCl2 application and angiotensin II (AngII) infusion for 4 weeks.

RESULTS

The HPD resulted in more pronounced AAA formation than did the ND. Importantly, vascular calcification was observed only in the aorta of the HPD mice. Enhanced Runt-related transcription factor 2 expression and apoptosis (downregulation of growth arrest-specific gene 6/pAkt survival pathway), two major mechanisms of vascular calcification, were also observed. Furthermore, increased IL-6 and F4/80 expression was observed in the aorta of HPD mice. In RAW264.7 cells, inorganic phosphate enhanced IL-6 and IL-1β expression under AngII priming. Ferric citrate, a phosphate binder, significantly inhibited HPD-induced AAA formation.

CONCLUSIONS

These findings suggest that HPD induces vascular calcification and AAA formation, possibly through inflammation. This murine model suggests that vascular calcification induced by phosphate burden may be a therapeutic target for vascular diseases, including AAA. Geriatr Gerontol Int 2024; ••: ••-••.

Fracture mechanics modeling of aortic dissection

Aortic dissection, a critical cardiovascular condition with life-threatening implications, is distinguished by the development of a tear and its propagation within the aortic wall. A thorough understanding of the initiation and progression of these tears, or cracks, is essential for accurate diagnosis and effective treatment. This paper undertakes a fracture mechanics approach to delve into the mechanics of tear propagation in aortic dissection. Our objective is to elucidate the impact of geometric and material parameters, providing valuable insights into the determinants of this pivotal cardiovascular event. Through our investigation, we have gained an understanding of how various parameters influence the energy release rate for tear propagation in both longitudinal and circumferential directions, aligning our findings with clinical data.

Anatomically realistic aortic dissection simulator as a potential training tool for point-of-care ultrasound

Aim

Simulators for aortic dissection diagnosis are limited by complex anatomy influencing the accuracy of point-of-care ultrasound for diagnosing aortic dissection. Therefore, this study aimed to create a healthy ascending aorta and class DeBakey, type II aortic dissection simulator as a potential point-of-care ultrasound training model.

Material and methods

3D mould simulators were created based on computed tomography images of one healthy and one DeBakey type II aortic dissection patient. In the next step, two polyvinyl alcohol-based and two silicone-based simulators were synthesised.

Results

The results of the scanning electron microscope assessment showed an aortic dissection simulator's surface with disorganised surface texture and higher root mean square (RMS or Rq) value than the healthy model of polyvinyl alcohol (RqAD = 20.28 > RqAAo = 10.26) and silicone (RqAD = 33.8 > RqAAo = 23.07). The ultrasound assessment of diameter aortic dissection showed higher than the healthy ascending aorta in polyvinyl alcohol (dAD = 28.2 mm > dAAo = 20.2 mm) and Si (dAD = 31.0 mm > dAAo = 22.4 mm), while the wall thickness of aortic dissection showed thinner than the healthy aorta in polyvinyl alcohol, which is comparable with the actual aorta measurement. The intimal flap of aortic dissection was able to replicate and showed a false lumen in the ultrasound images. The flap was measured quantitatively, indicating that the intimal flap was hyperechoic.

Conclusions

The simulators were able to replicate the surface morphology and echogenicity of the intimal flap, which is a linear hyperechoic area representing the separation of the aorta wall.

Mechanics of ascending aortic aneurysms based on a modulus of elasticity dependent on aneurysm diameter and pressure

The mechanical stresses and strains are examined, in ascending thoracic aortic aneurysm (aTAA) models, in a patient-specific aTAA as well as in healthy thoracic aortic models, via Finite Element Analysis. The aneurysms are assumed spherical, 1.5 mm thick, with diameters between 47 mm and 80 mm, eccentrically positioned. The geometry and wall thickness distribution of the aorta along its length are based on open literature data for an average patient age of 66.25 years, accounting for the Body Surface Area (BSA) parameter. The vessel wall material is assumed isotropic and incompressible, with its Young's modulus varying with the aneurysm diameter and the applied intraluminal pressure (120 mmHg to 240 mmHg). In the aTAAs, peak stresses were found to increase nonlinearly with aneurysm diameter (for a given pressure) tending to reach a plateau, appearing at the proximal area of the aneurysm, whereas lower stresses were found at its distal part and even smaller at the aneurysm maximum diameter. Regarding the patient-specific aTAA model, the peak stresses appeared at the distal part of the aneurysm where a tear of the intima layer was detected during surgical intervention. Peak strains exhibited for each pressure a maximum at a certain aneurysm diameter beyond which they dropped so that essentially the vessel wall's distensibility was thus reduced. Examining more than 100 geometry cases and employing a failure stress criterion, the rupture diameter thresholds were estimated to be 65, 52.5, 50 and 47.5 mm for a pressure of 120, 160, 200 and 240 mmHg respectively.

Evidence in Clinical Studies for the Role of Wall Thickness in Ascending Thoracic Aortic Aneurysms: A Scoping Review

BACKGROUND

Ascending thoracic aortic aneurysm is a chronic degenerative pathology characterized by dilatation of this segment of the aorta. Clinical guidelines use aortic diameter and growth rate as predictors of rupture and dissection. However, these guidelines neglect the effects of tissue remodeling, which may affect wall thickness. The present study aims to systematically review observational studies to examine to what extent wall thickness is considered and measured in clinical practice.

METHODS

Using PubMed and Web of Science, studies were identified with data on ascending aortic wall thickness, morphology, aortic diameter, and measurement techniques.

RESULTS

15 included studies report several methods by which wall thickness is measured. No association was observed between wall thickness and aortic diameter across included studies. Wall thickness values appear not materially different between aneurysmatic aortas and non-aneurysmal aortas.

CONCLUSIONS

The effects on and consequences of wall thickness changes during ATAA formation are ill-defined. Wall thickness values for aneurysmatic aortas can be similar to aortas with normal diameters. Given the existing notion that wall thickness is a determinant of mechanical stress homeostasis, our review exposes a clear need for consistent as well as clinically applicable methods and studies to quantify wall thickness in ascending aortic aneurysm research.

Fluid-Structure Interaction Simulations of Repaired Type A Aortic Dissection: a Comprehensive Comparison With Rigid Wall Models

This study aimed to evaluate the effect of aortic wall compliance on intraluminal hemodynamics within surgically repaired type A aortic dissection (TAAD). Fully coupled two-way fluid-structure interaction (FSI) simulations were performed on two patient-specific post-surgery TAAD models reconstructed from computed tomography angiography images. Our FSI model incorporated prestress and different material properties for the aorta and graft. Computational results, including velocity, wall shear stress (WSS) and pressure difference between the true and false lumen, were compared between the FSI and rigid wall simulations. It was found that the FSI model predicted lower blood velocities and WSS along the dissected aorta. In particular, the area exposed to low time-averaged WSS ( ≤ 0.2   P a ) was increased from 21 cm2 (rigid) to 38 cm2 (FSI) in patient 1 and from 35 cm2 (rigid) to 144 cm2 (FSI) in patient 2. FSI models also produced more disturbed flow where much larger regions presented with higher turbulence intensity as compared to the rigid wall models. The effect of wall compliance on pressure difference between the true and false lumen was insignificant, with the maximum difference between FSI and rigid models being less than 0.25 mmHg for the two patient-specific models. Comparisons of simulation results for models with different Young's moduli revealed that a more compliant wall resulted in further reduction in velocity and WSS magnitudes because of increased displacements. This study demonstrated the importance of FSI simulation for accurate prediction of low WSS regions in surgically repaired TAAD, but a rigid wall computational fluid dynamics simulation would be sufficient for prediction of luminal pressure difference.

Aortic local biomechanical properties in ascending aortic aneurysms

Ascending aortic aneurysm (AsAA) is a high-risk cardiovascular disease with an increased incidence over years. In this study, we compare different risk factors based on the pre-failure behavior (from a biomechanical point of view) obtained ex-vivo from an equi-biaxial tensile test. A total of 100 patients (63 ± 12 years, 72 males) with AsAA replacement, were recruited. Equi-biaxial tensile tests of AsAA walls were performed on freshly sampled aortic wall tissue after ascending aortic replacement. The aneurysmal aortic walls were divided into four quadrants (medial, anterior, lateral, and posterior) and two directions (longitudinal and circumferential) were considered. The stiffness was represented by the maximum Young Modulus (MYM). Based on patient information, the following subgroups were considered: age, gender, hypertension, obesity, dyslipidemia, diabetes, smoking history, aortic insufficiency, aortic stenosis, coronary artery disease, aortic diameter and aortic valve type. In general, when the aortic diameter increased, the aortic wall became thicker. In terms of the MYM, the longitudinal direction was significantly higher than that in the circumferential direction. In the multivariant analysis, the impact factors of age (p = 0.07), smoking (p = 0.05), diabetes (p = 0.03), aortic stenosis (p = 0.02), coronary artery disease (p < 10^-3), and aortic diameters (p = 0.02) were significantly influencing the MYM. There was no significant MYM difference when the patients presented arterial hypertension, dyslipidemia, obesity, or bicuspid aortic valve. To conclude, the pre-failure aortic stiffness is multi-factorial, according to our population of 100 patients with AsAA. STATEMENT OF SIGNIFICANCE: : Our research on the topic of "Aortic local biomechanical properties in case of ascending aortic aneurysms" is about the biomechanical properties on one hundred aortic samples according to the aortic wall quadrants and the direction. More than ten factors and risks which may impact ascending aortic aneurysms have been studied. According to our knowledge, so far, this article involved the largest population on this topic. It will be our pleasure to share this information with all the readers.

Association of 3-Year All-Cause Mortality and Peak Wall Stresses of Ascending Thoracic Aortic Aneurysms in Veterans

Risk of aortic dissection in ascending thoracic aortic aneurysms is not sufficiently captured by size-based metrics. From a biomechanical perspective, dissection may be initiated when wall stress exceeds wall strength. Our objective was to assess the association between aneurysm peak wall stresses and 3-year all-cause mortality. Finite element analysis was performed in 273 veterans with chest computed tomography for surveillance of ascending thoracic aortic aneurysms. Three-dimensional geometries were reconstructed and models developed accounting for prestress geometries. A fiber-embedded hyperelastic material model was applied to obtain circumferential and longitudinal wall stresses under systolic pressure. Patients were followed up to 3 years following the scan to assess aneurysm repair and all-cause mortality. Fine-Gray subdistribution hazards were estimated for all-cause mortality based on age, aortic diameter, and peak wall stresses, treating aneurysm repair as a competing risk. When accounting for age, subdistribution hazard of mortality was not significantly increased by peak circumferential stresses (p = 0.30) but was significantly increased by peak longitudinal stresses (p = 0.008). Aortic diameter did not significantly increase subdistribution hazard of mortality in either model (circumferential model: p = 0.38; longitudinal model: p = 0.30). The effect of peak longitudinal stresses on subdistribution hazard of mortality was maximized at a binary threshold of 355kPa, which captured 34 of 212(16%) patients with diameter <5 cm, 11 of 36(31%) at 5.0-5.4 cm, and 11 of 25(44%) at ≥5.5 cm. Aneurysm peak longitudinal stresses stratified by age and diameter were associated with increased hazard of 3-year all-cause mortality in a veteran cohort. Risk prediction may be enhanced by considering peak longitudinal stresses.

Synthesis of multidimensional pathophysiological process leading to type A aortic dissection: a narrative review

Objective

This review aims to synthesize the existing knowledge on the etiological process leading to type A aortic dissection (TAAD) and to clarify the relationship between mechanical, biochemical, and histopathological processes behind the aortic disease.

Background

Extensive research has previously identified several risk factors for TAAD as well as pathological mechanisms leading to TAAD. However, due to the complexity of the pathological process and limited knowledge on the relationships between distinct pathomechanisms leading to TAAD, the ability to identify the patients at high risk for TAAD has been poor.

Methods

PubMed (National Library of Medicine) database was searched for suitable literature. The most relevant articles focusing on anatomy, histopathology, physiology, and mechanics of ascending aorta and aortic diseases were reviewed.

Conclusions

Pathophysiology of the TAAD is related to biochemical and histological as well as mechanical and hemodynamic alterations leading to a degeneration of the aortic wall via inflammatory response. The degradative mechanisms of aortic wall structures and the mechanical forces, to which the wall is predisposed, are interrelated and influence one another. The relativity between the factors influencing aortic wall strength and healing capacity, and factors influencing mechanical stress on the aortic wall suggest that the risk of TAAD is not a linear but rather a dynamic phenomenon. Accounting for the dynamical property of the aortic disease in assessing the need for preventive surgical aortic reconstruction may provide a wider perspective in identifying patients at risk of TAAD and in planning preventive medical therapies.

Integration of multiple imaging platforms to uncover cardiovascular defects in adult zebrafish

Aims

Mammalian models have been instrumental in investigating adult heart function and human disease. However, electrophysiological differences with human hearts and high costs motivate the need for non-mammalian models. The zebrafish is a well-established genetic model to study cardiovascular development and function; however, analysis of cardiovascular phenotypes in adult specimens is particularly challenging as they are opaque.

Methods and results

Here, we optimized and combined multiple imaging techniques including echocardiography, magnetic resonance imaging, and micro-computed tomography to identify and analyse cardiovascular phenotypes in adult zebrafish. Using alk5a/tgfbr1a mutants as a case study, we observed morphological and functional cardiovascular defects that were undetected with conventional approaches. Correlation analysis of multiple parameters revealed an association between haemodynamic defects and structural alterations of the heart, as observed clinically.

Conclusion

We report a new, comprehensive, and sensitive platform to identify otherwise indiscernible cardiovascular phenotypes in adult zebrafish.

Proximal aortic aneurysms: correlation of maximum aortic diameter and aortic wall thickness

OBJECTIVES

The goal of therapy of proximal aortic aneurysms is to prevent an aortic catastrophe, e.g. acute dissection or rupture. The decision to intervene is currently based on maximum aortic diameter complemented by known risk factors like bicuspid aortic valve, positive family history or rapid growth rate. When applying Laplace's law, wall tension is determined by pressure × radius divided by aortic wall thickness. Because current imaging modalities lack precision, wall thickness is currently neglected. The purpose of our study was therefore to correlate maximum aortic diameter with aortic wall thickness and known indices for adverse aortic events.

METHODS

Aortic samples from 292 patients were collected during cardiac surgery, of whom 158 presented with a bicuspid aortic valve and 134, with a tricuspid aortic valve. Aortic specimens were obtained during the operation and stored in 4% formaldehyde. Histological staining and analysis were performed to determine the thickness of the aortic wall.

RESULTS

Patients were 62 ± 13 years old at the time of the operation; 77% were men. The mean aortic dimensions were 44 mm, 41 mm and 51 mm at the aortic root, sinotubular junction and ascending aorta, respectively. Aortic valve stenosis was the most frequent (49%) valvular dysfunction, followed by aortic valve regurgitation (33%) and combined dysfunction (10%). The maximum aortic diameter at the ascending level did not correlate with the thickness of the media (R = 0.07) or the intima (R = 0.28) at the convex sample site. There was also no correlation of the ascending aortic diameter with age (R = -0.18) or body surface area (R = 0.07). The thickness of the intima (r = 0.31) and the media (R = 0.035) did not correlate with the Svensson index of aortic risk. Similarly, there was a low (R = 0.29) or absent (R = -0.04) correlation between the aortic size index and the intima or media thickness, respectively. There was a similar relationship of median thickness of the intima in the 4 aortic height index risk categories (P < 0.001).

CONCLUSIONS

Aortic diameter and conventional indices of aortic risk do not correlate with aortic wall thickness. Other indices may be required in order to identify patients at high risk for aortic complications.

Aortic Thickness: A Forgotten Paradigm in Risk Stratification of Aortic Disease

BACKGROUND

 This study aimed at risk-stratifying aortic dilatation using aortic wall thickness (AWT) and comparing methods of AWT assessment.

METHODS

 Demographic, epidemiological, and perioperative data on 72 consecutive aortic surgeries (age = 62 years[standard deviation (SD) = 12] years) performed by a single surgeon were collected from hospital database. Aortic thickness was measured on computed tomography scans, as well as intraoperatively in four quadrants, at the level of aortic sinuses, as well as midascending aorta, using calipers. Aortic wall stress was calculated using standard mathematical formulae.

RESULTS

 The ascending aorta was 48.2 (SD = 8) mm and the mean thickness at ascending aorta level was 1.9 (SD = 0.3) mm. There was congruence between imaging and intraoperative measurements of thickness, as well as between the radiologist and surgeon. Preoperatively, 16 patients had multiple imaging studies showing an average rate of growth of 1.2 mm per year without significant difference in thickness. The wider the aorta, the thinner was the lateral or convex wall. Aortic stenosis (p = 0.01), lateral to medial wall thickness ratio (p = 0.04), and history of hypertension (p = 0.00), all had protective effect on aortic root stress. The ascending aortic stress was directly affected by age (p = 0.03) and inversely related to lateral to medial wall thickness ratio (p = 0.03).

CONCLUSION

 Aortic thickness can be measured preoperatively and easily confirmed intraoperatively. Risk stratification based on both aortic thickness and diameter (stress calculations) would better predict acute aortic events in dilated aortas and define aortic resection criteria more objectively.

An unexpected paradox: wall shear stress in the aorta is less in patients with severe atherosclerosis regardless of obesity

BACKGROUND

Obesity is a widespread condition that is more prevalent in Western countries compared to others. Aortic atherosclerosis (AA) is a condition that frequently has been associated with obesity. An obesity paradox, where morbidly obese decedents had either no or minimal AA compared to nonobese decedents, recently has been described by some of us. The explanation for this almost counterintuitive paradox has yet to be determined, but a number of hypotheses were advanced, including hemodynamic factors producing aortic wall shear stress (WSS). The purpose of the present study was to determine if there was a relationship between AA and WSS, as determined by postmortem measurement of aortic wall diameters.

METHODS

Circumferences of the aorta at the levels of the ascending, thoracic and abdominal aorta were measured in 274 consecutive autopsies over 2-year period of time. AA was assessed using a previously described grading scale as either mild or severe. Circumferences were mathematically converted to diameters and WSS was calculated using the Hagen-Poiseuille formula. Two different methods to estimate cardiac output were used, both based on literature methods, one of which was body mass index (BMI) dependent, and the other BMI independent. Univariate and multivariable analyses of the relationship between WSS, age, BMI, gender, race and severity of AA were performed.

RESULTS

Of the 274 decedents, 140 had mild and 134 had moderate to severe AA. BMI <35 was associated with moderate to severe AA. WSS was inversely correlated with AA in all these segments of the aorta in each BMI subgroup with the exception of the ascending aorta for decedents with BMI ≤35 kg/m². Contrary to what we had hypothesized, WSS was not a determinant of the obesity paradox. However, among all the variables analyzed, a history of hypertension, diabetes mellitus and age were significant factors for developing AA (relative risk [RR] 0.35, P = .039; RR 1.51, P = .0006, RR 1.19, P = .0001, respectively).

CONCLUSIONS

Our data demonstrate that WSS was unexpectedly lower in decedents with moderate and severe AA as compared to those with mild AA. This observation, which requires further investigations, was seen in all BMI ranges and was confirmed by 2 methods to calculate WSS.

Fluid-structure interaction simulations outperform computational fluid dynamics in the description of thoracic aorta haemodynamics and in the differentiation of progressive dilation in Marfan syndrome patients

Abnormal fluid dynamics at the ascending aorta may be at the origin of aortic aneurysms. This study was aimed at comparing the performance of computational fluid dynamics (CFD) and fluid-structure interaction (FSI) simulations against four-dimensional (4D) flow magnetic resonance imaging (MRI) data; and to assess the capacity of advanced fluid dynamics markers to stratify aneurysm progression risk. Eight Marfan syndrome (MFS) patients, four with stable and four with dilating aneurysms of the proximal aorta, and four healthy controls were studied. FSI and CFD simulations were performed with MRI-derived geometry, inlet velocity field and Young's modulus. Flow displacement, jet angle and maximum velocity evaluated from FSI and CFD simulations were compared to 4D flow MRI data. A dimensionless parameter, the shear stress ratio (SSR), was evaluated from FSI and CFD simulations and assessed as potential correlate of aneurysm progression. FSI simulations successfully matched MRI data regarding descending to ascending aorta flow rates (R 2 = 0.92) and pulse wave velocity (R 2 = 0.99). Compared to CFD, FSI simulations showed significantly lower percentage errors in ascending and descending aorta in flow displacement (-46% ascending, -41% descending), jet angle (-28% ascending, -50% descending) and maximum velocity (-37% ascending, -34% descending) with respect to 4D flow MRI. FSI- but not CFD-derived SSR differentiated between stable and dilating MFS patients. Fluid dynamic simulations of the thoracic aorta require fluid-solid interaction to properly reproduce complex haemodynamics. FSI- but not CFD-derived SSR could help stratifying MFS patients.

High Wall Stress May Predict the Formation of Stent-Graft-Induced New Entries After Thoracic Endovascular Aortic Repair

PURPOSE

To explore the potential role of morphological factors and wall stress in the formation of stent-graft-induced new entries (SINE) based on computed tomography (CT) images after thoracic endovascular aortic repair (TEVAR).

CASE REPORT

Two female patients aged 59 years (patient 1) and 44 years (patient 2) underwent TEVAR for type B dissection in the chronic (patient 1) or subacute (patient 2) phase. CT scans at 3-month follow-up showed varying degrees of false lumen thrombosis in both patients. At 14-month follow-up, a SINE was observed in patient 1 while the dissected aorta in the other patient remained stable. Morphological and finite element analyses were performed based on the first follow-up CT images. The computational results showed that the SINE patient had higher stent-graft tortuosity than the non-SINE patient and much higher wall stress in the region close to the distal SINE.

CONCLUSION

This case study suggests that high stent-graft tortuosity can lead to high wall stress, which is potentially linked to the formation of SINE. Further large population-based studies are needed to confirm this preliminary finding.