Influence of elastomeric and steel ligatures on periodontal health during fixed appliance orthodontic treatment: a systematic review and meta-analysis

INTRODUCTION

Metallic and elastomeric ligatures are widely used in orthodontics to secure the archwire within the bracket slots, but elastomeric ligatures have traditionally been associated with increased microbial colonization, which could adversely affect periodontal health.

AIM

This systematic review compares the periodontal effects of elastomeric and steel ligatures used for orthodontic fixed appliances.

METHODS

Unrestricted literature search of 7 databases (MEDLINE, Scopus, Web of Science, Embase, Cochrane Database of Systematic Reviews, Cochrane Central Register of Controlled Trials, and Virtual Health Library) up to July 2023 were performed for randomized / non-randomized clinical studies on humans comparing the two ligation methods during fixed-appliance therapy. After duplicate study selection, data extraction, and risk-of-bias assessment with the Risk of Bias (RoB) 2 or the Risk Of Bias In Non-randomized Studies - of Interventions (ROBINS-I) tool, random-effects meta-analyses of Mean Differences (MD) or Standardized Mean Differences (SMD) and their 95% confidence intervals (CIs) were carried out, followed by assessment of certainty of existing evidence with the Grades of Recommendation, Assessment, Development, and Evaluation (GRADE) approach.

RESULTS

A total of 11 studies (3 randomized / 8 non-randomized) with 354 patients (mean age 14.7 years and 42% male) were included. No statistically significant differences were seen for plaque index (5 studies; SMD = 0.48; 95% CI = -0.03 to 1.00; P = 0.07), gingival index (2 studies; MD = 0.01; 95% CI = -0.14 to 0.16; P = 0.89), probing pocket depth (2 studies; MD = 0; 95% CI = -0.17 to 0.16; P = 0.97), or Streptococcus mutans counts (4 studies; SMD = 0.40; 95% CI=-0.41 to 1.20; P = 0.21). Elastomeric ligatures were associated with moderately increased total bacterial load (3 studies; SMD = 0.43; 95% CI = 0.10 to 0.76; P = 0.03). Confidence in these estimates was low in all instances due to the inclusion of non-randomized studies with high risk of bias.

CONCLUSIONS

Existing low quality evidence indicates that ligature method does not seem to influence the periodontal health during fixed treatment, even if elastomeric ligatures are associated with a moderate increase of bacterial load.

REGISTRATION

PROSPERO (CRD42023444383).

The effect of ligation methods on biofilm formation in patients undergoing multi-bracketed fixed orthodontic therapy - A systematic review

BACKGROUND

Many modifications to fixed orthodontic appliances have been introduced to manage biofilm formation. The aim of this review was to investigate elastomeric ligation in comparison with stainless steel ligation and self-ligation with regard to microbiological and clinical indicators of biofilm formation in patients wearing multi-bracketed fixed orthodontic appliances.

METHODS

The MEDLINE and the EMBASE databases were searched up to February 2021 and supplemented by additional manual searches of bibliographies. Parallel-group and split-mouth randomized controlled trials (RCTs) comparing different ligation methods were identified. The Cochrane Risk of Bias-2 tool was applied to assess the quality of evidence.

RESULTS

A total of 11 RCTs were included in this review. Nine RCTs compared self-ligation and elastomeric ligation; two compared elastomeric ligation and stainless steel ligation. The included studies had either some concerns or were at a high risk of bias. Qualitative assessment of the studies identified that there were no significant differences in biofilm formation between elastomeric ligation and self-ligation, but that stainless steel ligation was less susceptible to biofilm formation than elastomeric ligation.

CONCLUSIONS

There were no significant differences between self-ligation and elastomeric ligation for biofilm formation in patients wearing multi-bracketed fixed orthodontic appliances. Stainless steel ligation may accumulate less biofilm than elastomeric ligation; however, the clinical significance of the difference could not be evaluated. Further high-quality studies are required in order to determine which ligation method is better for managing biofilm formation in patients wearing multi-bracketed fixed orthodontic appliances.

Changes in the Microbiome of the Inner Surface of Clear Aligners After Different Usage Periods

Clear aligners are removable orthodontic appliances that cover the tooth surface. The microbial composition and pH of the inner surface of aligners directly affect the enamel health. In this study, eight subjects who used the same type of clear aligners were instructed to brush their teeth normally and to not clean their aligners until sampling. Saliva and the contents of the inner surface of the aligners (liquid and plaque) were collected at 0 h (T0), 4 h (T4), 8 h (T8), 12 h (T12), and 24 h (T24) after usage, and pH values and microbial compositions were measured. The microbial composition was analyzed with 16S rRNA gene sequencing, and changes were assessed based on operational taxonomic unit abundance. The pH, alpha diversity values, and abundance of specific microbes on the inner surface of the aligners gradually decreased from T0 to T24 (P < 0.05). An insignificant increase in microbial community beta diversity was observed from T0 to T24. Principal component analysis revealed that the microbial composition at T0 was different from at T12 and T24. The relative abundances of phylum Firmicutes (P < 0.01), orders Lactobacillales and Bacteroidales (P < 0.05), and genus Streptococcus and species Streptococcus infantis increased significantly, while those of genera Actinomyces and Rothia and species Rothia aeria decreased significantly at T24 (P < 0.05). These findings reveal that uncleaned aligners might lead to enamel damage, especially after continuous usage for 12 h. Thus, clear aligners should be cleaned after 12 h of usage or at least within 24 h of usage.

Efficacy of fluoride associated with nano-hydroxyapatite in reducing enamel demineralization adjacent to orthodontic brackets: in situ study

Objective:

To assess in situ the effect of fluoride associated with nano-hydroxyapatite for the prevention of demineralization of the enamel adjacent to orthodontic brackets.

Material and Methods:

Eight volunteers wore palatal devices prepared with 6 bovine enamel blocks (5x5x2 mm) with bonded brackets. The volunteers used the devices in two different moments of 14 days each. During the first 14 days, a product containing fluoride + nano-hydroxyapatite was applied twice (experimental group, GNH, n = 48), and for the other 14 days no prevention product was applied (control group, CG, n = 48). In both groups, along the experiment, the blocks were dripped with 20% sucrose eight times daily. After the experiment, all the specimens were sectioned and examined for lesion depth analysis (µm) under polarized light microscopy, and for enamel longitudinal microhardness (measured under the bracket, at 30 µm and at 130 µm from the margin), at seven different depths (10, 20, 30, 50, 70, 90, and 110 µm).

Results:

Under polarized light, group GNH presented significantly less demineralization depth (X¯= 15.01 µm, SD = 33.65) in relation to CG (X¯= 76.43 µm, SD = 83.75). Enamel longitudinal microhardness demonstrated significantly higher microhardness for group GNH when compared to CG.

Conclusion:

Fluoride + nano-hydroxyapatite can be an alternative preventive procedure for demineralization of the enamel adjacent to orthodontic brackets.

Prevention and caries risk management in teenage and orthodontic patients

As patients progress from childhood through to teenage years, they progress through periods of high caries risk as they undergo changes in lifestyle and oral microflora. Removable or fixed orthodontic treatment also alters the oral microflora and can dramatically increase caries risk. This paper outlines ways to identify the transition to higher caries risk, and practical ways to lower the risk of hard tissue loss from dental caries during orthodontic treatment across the teenage years, including tooth surface protection, optimised use of mechanical and chemical plaque control, and appropriate delivery of remineralising agents over time.

Randomised in situ clinical trial investigating self-assembling peptide matrix P11-4 in the prevention of artificial caries lesions

The aim was to investigate the ability of self-assembling Peptide P11-4 Matrix (SAPM) to remineralize artificial initial caries lesions compared to the use of fluoride varnish. Volunteers were recruited for this randomised, cross-over in situ trial. Bovine specimens, half including orthodontic brackets, were recessed on the buccal aspects of mandibular appliances. Specimens included internal sound enamel control, a demineralised control and a part exposed during the in situ phase. Each phase lasted four weeks, followed by a one-week washout. Treatment groups were: A: negative control, no treatment,B: positive control, 22,600 ppm fluoride varnish,C: test group, 1,000 ppm SAPM. Laser fluorescence values (LF) were measured before/after demineralisation, and after the in situ period. Micro-CT analysis was used to assess mineral changes within the specimens after the in situ phase. In specimens without brackets, ΔLF values after in situ phase were: A: +5.28, B: +0.85, C: −2.89. Corresponding ΔLF for specimens with brackets were: A: +5.77, B: +1.30, C: −3.15. LF-values between groups significantly differed from each other (p < 0.0001) after the in situ phase. Micro-CT analysis yielded no significant difference among groups for specimens without brackets. For specimens with brackets, the test group showed significantly more remineralisation than the negative (p = 0.01) and positive control (p = 0.003). Within the limitations of the study, SAPM showed prevention of caries and remineralisation of enamel around orthodontic brackets.

Microbial Colonization on Elastomeric Ligatures during Orthodontic Therapeutics: An Overview

The current review focuses on the studies conducted on the colonization of microorganisms on orthodontic ligatures during orthodontic treatment. The fixed orthodontic appliances have long been associated with an increase in plaque accumulation, bacterial colonization, and resultant enamel decalcification. Voluminous research has been carried out on the microbial colonization of even newer orthodontic materials such as elastomeric ligatures with an evidence of variably increased microbial counts during orthodontic treatment. However, conclusive material-based data for minimal microbial colonization to establish acceptance criteria for the use of elastomeric ligatures are hardly available. Thus, there is a need for further studies with dual emphasis on exploring microbial associations based on surface chemistries of different elastomers and their requisite modifications for hampering microbial biofilms to evolve efficacious oral health friendly orthodontic ligatures.

Evaluation of the anti-cariogenic potential and bond strength to enamel of different fluoridated materials used for bracket bonding

Abstract Objective To evaluate the in vitro and in situ anti-cariogenic potential and bond strength to enamel of materials containing fluoride (F), used for bracket bonding: Transbond XT (GT, negative control), Transbond Plus Color Change (GTF), Transbond-Self-Etching Primer (GSAF) and Vitremer (GV, positive control). Material and method In the in vitro study, the specimens were premolars with bonded brackets (n=12/group). After pH cycling, the F release, bond strength, fracture mode and presence of white spot lesions were assessed. In the in situ study, the specimens were enamel fragments with bonded brackets (n=12/group). Twelve volunteers wore palatal appliances in 4 phases, with cariogenic challenge. Bond strength, fracture mode and change in surface hardness (%SH) were determined. Result Relative to the in vitro study, F release (ppm) was: GT=0.257±0.068c; GTF=0.634±0.100b; GSAF=0.630±0.067b; GV=2.796±1.414a. Only GV showed no white spot lesions. Bond strength values (MPa) were GT=7.62±7.18a; GTF=5.15±6.91ab; GSAF=3.42±2.97bc; GV=2.87±2.09c. Adhesive fracture was the most frequent type, except for GTF. In the in situ study, %SH was: GT=-56.0±18.3a; GTF=-57.6±11.9a; GSAF=-57.1±11.3a; GV=-52.4±25.8a. Bond strength values were GT=9.5±4.4a; GTF=11.1±5.9a; GSAF=13.2± 6.6a; GV=6.6±4.0a. Cohesive fracture in material was the most frequent type, except for GTF. Conclusion Vitremer (GV) showed the highest anti-cariogenic potential in the in vitro study. However, it was not confirmed by the in situ study. Regarding bond strength values from the in situ study, all materials were shown to be adequate for clinical practice.

Devices for In situ Development of Non-disturbed Oral Biofilm. A Systematic Review

Objective: The aim of this review was to assess the types of devices used for in situ development of oral biofilm analyzed microbiologically.

Materials and Methods: A systematic search of the literature was conducted to identify all in situ studies of oral biofilm which used an oral device; the Ovid MEDLINE and EMBASE databases complemented with manual search were used. Specific devices used to microbiologically analyze oral biofilm in adults were included. After reading of the selected full texts, devices were identified and classified according to the oral cavity zone and manufacturing material. The “ideal” characteristics were analyzed in every group.

Results: The search provided 787 abstracts, of which 111 papers were included. The devices used in these studies were classified as palatal, lingual or buccal. The last group was sub-classified in six groups based on the material of the device. Considering the analyzed characteristics, the thermoplastic devices and the Intraoral Device of Overlaid Disk-holding Splints (IDODS) presented more advantages than limitations.

Conclusions: Buccal devices were the most commonly used for the study of in situ biofilm. The majority of buccal devices seemed to slightly affect the volunteer's comfort, the IDODS being the closest to the “ideal” model.

Clinical Relevance: New devices for in situ oral biofilm microbiological studies should take into account the possible effect of their design on the volunteer's comfort and biofilm formation.

Plaque accumulation and Streptococcus mutans levels around self-ligating bracket clips and elastomeric modules: A randomized controlled trial

Aim

To determine the effect of two different ligating systems that is, elastomeric modules and self-ligating (SL) bracket systems (Smartclip - 3M Unitek) with respect to harboring bacterial plaque in fixed orthodontic treatment.

Objectives

To assess, evaluate, and compare the amount of plaque accumulation and Streptococcus mutans colonization around elastomeric ligation and SL clips in the smart clip appliance.

Materials and Methods

A total of 111 orthodontic patients scheduled for fixed orthodontic treatments were selected for this split maxillary arch study. All the patients were bonded with smart-clip (3M Unitek) SL brackets, and the wire was placed into the bracket slots, on the randomly selected hemi arch, elastomeric modules were placed for the study to be conducted. Microbial and periodontal plaque accumulation was recorded at 3-time intervals post ligation. Plaque index-by Silness and Loe, modified Quigely Hein index, bleeding on probing were evaluated, and biofilm was collected from the tooth surface after 30 days and placed in petri dishes containing Mitis Salivarius agar for bacterial culturing.

Result

It was observed that the side where ligation was done with elastomeric modules accumulated more plaque and increase in S. mutans colony forming units as compared to the side without external ligation (P < 0.05).

Conclusion

Reduced bacterial colonization and better plaque control was seen with SL orthodontic bracket appliance system as compared to conventional ligation method.

Are self-ligating brackets related to less formation of Streptococcus mutans colonies? A systematic review

OBJECTIVE

To verify, by means of a systematic review, whether the design of brackets (conventional or self-ligating) influences adhesion and formation of Streptococcus mutans colonies.

METHODS

SEARCH STRATEGY

four databases (Cochrane Central Register of Controlled Trials, Ovid ALL EMB Reviews, PubMed and BIREME) were selected to search for relevant articles covering the period from January 1965 to December 2012.

SELECTION CRITERIA

in first consensus by reading the title and abstract. The full text was obtained from publications that met the inclusion criteria.

DATA COLLECTION AND ANALYSIS

Two reviewers independently extracted data using the following keywords: conventional, self-ligating, biofilm, Streptococcus mutans, and systematic review; and independently evaluated the quality of the studies. In case of divergence, the technique of consensus was adopted.

RESULTS

The search strategy resulted in 1,401 articles. The classification of scientific relevance revealed the high quality of the 6 eligible articles of which outcomes were not unanimous in reporting not only the influence of the design of the brackets (conventional or self-ligating) over adhesion and formation of colonies of Streptococcus mutans, but also that other factors such as the quality of the bracket type, the level of individual oral hygiene, bonding and age may have greater influence. Statistical analysis was not feasible because of the heterogeneous methodological design.

CONCLUSIONS

Within the limitations of this study, it was concluded that there is no evidence for a possible influence of the design of the brackets (conventional or self-ligating) over colony formation and adhesion of Streptococcus mutans.

The influence of protective varnish on the integrity of orthodontic cements

OBJECTIVE

The aim of the present study was to assess the influence of saliva contamination over the structural strength and integrity of conventional glass-ionomer cements used for cementing orthodontic bands in the absence and presence of a surface-protecting varnish.

METHODS

48 samples were prepared by inserting 3 types of glass-ionomer cements into standardized metallic matrixes with 10 mm of diameter and 2 mm of depth. The cements used were: Meron (VOCO), Ketac-Cem (3M ESPE) and Vidrion C (DFL), all of which comprised groups A, B and C, respectively. Subgroups A1, B1 and C1 comprised samples with no surface protection, whereas subgroups A2, B2 and C2 comprised samples of which surface was coated with Cavitine varnish (SS White), after cement manipulation and application, in order to protect the cement applied. All samples were stored in artificial saliva for 24 hours at 37°C. A Vickers diamond micro-durometer was used to produce indentations on the non-treated group (non-varnished) and the treated group (varnished).

RESULTS

Varnished materials had significantly higher microhardness values in comparison to non-varnished materials. Ketac-Cem had the highest microhardness value among the varnished materials.

CONCLUSIONS

Varnish application is necessary to preserve the cement and avoid enamel decalcification. Glass-ionomer cements should be protected in order to fully keep their properties, thus contributing to dental health during orthodontic treatment.

Antibacterial efficacy of prophylactic ozone treatment on patients with fixed orthodontic appliances

OBJECTIVE

This study investigated the efficacy of ozone on microflora of patients with fixed orthodontic appliances.

MATERIALS AND METHODS

Ten subjects undergoing fixed appliance therapy were enrolled in the study. Before any application, two elastic ligatures were removed with the aid of a sterile probe from the premolar brackets on the upper right and lower left jaws for baseline bacteriological counts. Then ozone gas was applied for 180 s by running the device on prophylaxis mode with included mouth tray according to the manufacturer's recommendations on all brackets. After the ozone application, two other elastic ligatures were removed from the opposite sides of the mouth of the patients. One week after the application two more elastic samples, which were not changed in the previous session, were collected from the upper right and lower left premolar brackets. The elastic ligatures were immersed in transfer solutions and cultured to determine the Streptococcus mutans and Lactobacillus acidophilus. Statistical analysis of the data was obtained by paired Student's t-tests.

RESULTS

The ozone treatment reduced the S. mutans and L. acidophilus immediately after the application and these reductions were found to be statistically significant (p = 0.038 and p = 0.020). Both the S. mutans and L. acidophilus values increased by the 1-week period and the S. mutans values were significantly higher than the baseline values (p = 0.01).

CONCLUSION

It can be concluded that the ozone treatment may have an instantaneous lethal effect on S. mutans and L. acidophilus; however, within the limitations of this study, a long-term preventive effect could not be observed.

Clinical and microbiological parameters in patients with self-ligating and conventional brackets during early phase of orthodontic treatment

OBJECTIVE

To determine the effect of different bracket designs (conventional brackets and self-ligating brackets) on periodontal clinical parameters and periodontal pathogens in subgingival plaque.

MATERIAL AND METHODS

The following inclusion criteria were used: requirement of orthodontic treatment plan starting with alignment and leveling, good general health, healthy periodontium, no antibiotic therapy in the previous 6 months before the beginning of the study, and no smoking. The study sample totaled 38 patients (13 male, 25 female; mean age, 14.6 ± 2.0 years). Patients were divided into two groups with random distribution of brackets. Recording of clinical parameters was done before the placement of the orthodontic appliance (T0) and at 6 weeks (T1), 12 weeks (T2), and 18 weeks (T3) after full bonding of orthodontic appliances. Periodontal pathogens of subgingival microflora were detected at T3 using a commercially available polymerase chain reaction test (micro-Dent test) that contains probes for Aggregatibacter actinomycetemcomitans, Porphyromonas gingivalis, Prevotella intermedia, Tannerella forsythia, and Treponema denticola.

RESULTS

There was a statistically significant higher prevalence of A actinomycetemcomitans in patients with conventional brackets than in patients with self-ligating brackets, but there was no statistically significant difference for other putative periodontal pathogens. The two different types of brackets did not show statistically significant differences in periodontal clinical parameters.

CONCLUSION

Bracket design does not seem to have a strong influence on periodontal clinical parameters and periodontal pathogens in subgingival plaque. The correlation between some periodontal pathogens and clinical periodontal parameters was weak.