Multifunctional coatings of nickel-titanium implant toward promote osseointegration after operation of bone tumor and clinical application: a review

Metal implants, especially Ni-Ti shape memory alloy (Ni-Ti SMA) implants, have increasingly become the first choice for fracture and massive bone defects after orthopedic bone tumor surgery. In this paper, the internal composition and shape memory properties of Ni-Ti shape memory alloy were studied. In addition, the effects of porous Ni-Ti SMA on osseointegration, and the effects of surface hydrophobicity and hydrophilicity on the osseointegration of Ni-Ti implants were also investigated. In addition, the effect of surface coating modification technology of Ni-Ti shape memory alloy on bone bonding was also studied. Several kinds of Ni-Ti alloy implants commonly used in orthopedic clinic and their advantages and disadvantages were introduced. The surface changes of Ni-Ti alloy implants promote bone fusion, enhance the adhesion of red blood cells and platelets, promote local tissue regeneration and fracture healing. In the field of orthopaedics, the use of Ni-Ti shape memory alloy implants significantly promoted clinical development. Due to the introduction of the coating, the osseointegration and biocompatibility of the implant surface have been enhanced, and the success rate of the implant has been greatly improved.

Micro finite element analysis of continuously loaded mini-implants - A micro-CT study in the rat tail model

Implant migration has been described as a minor displacement of orthodontic mini-implants (OMIs) when subjected to constant forces. Aim of this study was to evaluate the impact of local stresses on implant migration and bone remodelling around constantly loaded OMIs. Two mini-implants were placed in one caudal vertebra of 61 rats, connected by a nickel‑titanium contraction spring, and loaded with different forces (0.0, 0.5, 1.0, 1.5 N). In vivo micro-CT scans were taken immediately and 1, 2 (n = 61), 4, 6 and 8 (n = 31) weeks post-op. Nine volumes of interest (VOIs) around each implant were defined. To analyse stress values, micro-finite element models were created. Bone remodelling was analysed by calculating the bone volume change between scans performed at consecutive time points. Statistical analysis was performed using a linear mixed model and likelihood-ratio-tests, followed by Tuckey post hoc tests when indicated. The highest stresses were observed in the proximal top VOI. In all VOIs, stress values tended to reach their maximum after two weeks and decreased thereafter. Bone remodelling analysis revealed initial bone loss within the first two weeks and bone gain up to week eight, which was noted especially in the highest loading group. The magnitude of local stresses influenced bone remodelling and it can be speculated that the stress related bone resorption favoured implant migration. After a first healing phase with a high degree of bone resorption, net bone gain representing consolidation was observed.

Implant-bone-interface: Reviewing the impact of titanium surface modifications on osteogenic processes in vitro and in vivo

Titanium is commonly and successfully used in dental and orthopedic implants. However, patients still have to face the risk of implant failure due to various reasons, such as implant loosening or infection. The risk of implant loosening can be countered by optimizing the osteointegration capacity of implant materials. Implant surface modifications for structuring, roughening and biological activation in favor for osteogenic differentiation have been vastly studied. A key factor for a successful stable long-term integration is the initial cellular response to the implant material. Hence, cell-material interactions, which are dependent on the surface parameters, need to be considered in the implant design. Therefore, this review starts with an introduction to the basics of cell-material interactions as well as common surface modification techniques. Afterwards, recent research on the impact of osteogenic processes in vitro and vivo provoked by various surface modifications is reviewed and discussed, in order to give an update on currently applied and developing implant modification techniques for enhancing osteointegration.

Effect of surface treatment on the mechanical stability of orthodontic miniscrews

OBJECTIVES

To provide collective quantitative evidence about the effect of surface treatments on the mechanical stability of orthodontic miniscrews (MSs).

MATERIALS AND METHODS

The study was registered in PROSPERO (No. CRD42020209652). The research question was defined according to the PICO (population, intervention, control, and outcomes) format. Various research databases were searched for animal and human studies on effects of surface treatment on the mechanical stability of MSs. Both prospective and retrospective in vivo clinical studies published in English were included. The risk of bias was assessed using SYRCLE's risk of bias tool for animal studies. The meta-analysis was conducted using RevMan 5.4.

RESULTS

A total of 109 articles were identified; 14 were included in the systematic review, and seven studies with sandblasting, acid etching (SLA) methods of surface treatment were included for meta-analysis. The number of study participants ranged from 6 to 24 (total n = 185), with a mean of 13.2. A total of 949 MSs were used with a mean of 67.8. The overall success rate for surface-treated MSs ranged from 47.9% to 100%. Forest plot of removal torque values showed significantly higher values for SLA surface-treated MSs compared with controls with a standard mean difference of 2.61 (95% confidence interval = 1.49-3.72, I2 = 85%). Forest plot of insertion torque showed a standard mean difference of -6.19 (95% confidence interval = -13.63-1.25, I2 = 98%, P = .10).

CONCLUSIONS

Surface treatment of MSs improved primary and secondary stability with good osseointegration at the bone-implant surface. However, significant heterogeneity across the studies included in the meta-analysis made it difficult to draw conclusions.

Evaluation of the long-term stability of micro-screws under different loading protocols: a systematic review

The aim of this systematic review was to investigate the association between the different factors of loading protocols and the long-term stability of micro-screws from biomechanical and histological viewpoints. Searches were performed on PubMed, Embase, Cochrane Library, Wanfang and CNKI databases for animal experiments comparing loading protocols and the long-term stability of micro-screws. Among 1011 detected papers, 16 studies met the eligibility criteria and were selected for analysis. Most studies showed medium methodological quality for evaluation of micro-screws' long-term stability. Five studies reported that loading would not destroy the long-term stability of micro-screws. Three studies indicated that low-intensity immediate loading or a 3-week minimal healing time was acceptable. Two studies reported that the loading magnitude was a controversial issue with regard to the micro-screws' long-term stability. Two studies suggested that counterclockwise loading could decrease the long-term stability of micro-screws. In conclusion, immediate loading below 100g force, healing time greater than 3 weeks, regular loading below 200g force and a clockwise direction of force supported the long-term stability of micro-screws. Further studies relating to the combination of varying loading conditions will be needed.

Comparison of BALP, CTX-I, and IL-4 levels around miniscrew implants during orthodontic tooth movement between two different amounts of force

OBJECTIVES

To evaluate the Interleukin-4 (IL-4), bone-specific alkaline phosphatase (BALP), and C-telopeptide of type I collagen (CTX-I) levels in peri-miniscrew crevicular fluid (PMCF) during orthodontic tooth movement between 75 and 150 g of distalization force.

MATERIALS AND METHODS

Thirty miniscrews were placed bilaterally between the maxillary second premolars and first molars. The right and the left maxillary canines were moved distally using either 75 or 150 g of force. PMCF samples were collected before loading (T0); at 2 hours (T1) and 24 hours (T2) later; and on days 7 (T3), 14 (T4), 21 (T5), 30 (T6), and 90 (T7) after force application. Enzyme-linked immunosorbent assay kits were used to determine BALP, CTX-I, and IL-4 levels.

RESULTS

There was no significant difference between the force groups at all time points with respect to BALP, CTX-I, and IL-4 levels (P > .05). There was no significant difference among time points for the two force groups in terms of BALP and IL-4 levels (P > .05). The CTX-I level at T3 was significantly higher than at T0 for both force groups (P < .05).

CONCLUSIONS

Both 75 g and 150 g of orthodontic force are within optimal force limits, and there is no difference in biochemical markers of bone turnover.