Three-dimensional evaluation on digital casts of maxillary palatal size and morphology in patients with functional posterior crossbite

Evaluation of palate morphology in patients treated with leaf expander and hyrax expander: A geometric morphometric analysis

OBJECTIVE

The aim of this study was to evaluate changes in shape of the palatal vault after maxillary expansion with hyrax expander (HE) and leaf expander (LE), using 3D Geometric Morphometric Analysis.

SETTING AND SAMPLE POPULATION

Overall, 250 patients (110 M, 140 F) with maxillary transverse deficiency were selected for this study. In this study, 127 subjects were treated with HE, 123 with LE.

MATERIALS AND METHODS

Digital dental models were obtained pre-treatment (T0) and after 12 months from the cementation of the device (T1) and processed by means of a digital scanner. Linear and morphometric analyses were conducted to determine the effects of each appliance on dental measurements and palatal shape, and a multiple linear regression was performed to analyse the influence of anchorage and appliance type on final shape.

RESULTS

Morphometric analysis showed that there was a lowering of the palatal vault in the HE group, while in the LE group it remained unchanged: the difference in palatal shape at time T0 and T1 was statistically significant in both treatments (HE vs. LE). In the HE group, the change in shape also included the upper part of the palatal vault in the vertical dimension, while in the LE group the change in shape interested mainly palatal shelves and the lower portion of the palate.

CONCLUSIONS

Both LE and HE produce clinically significant changes in the morphology of the palatal vault.

Medium-term effects of rapid maxillary expansion on nasal cavity and pharyngeal airway volumes considering age as a factor: A retrospective study

OBJECTIVES

The medium-term effects of rapid maxillary expansion (RME) on nasal cavity (NC) and upper airway (UA) dimensions based on chronological age are still unclear. This retrospective study evaluated the medium-term changes occurring in the NC and pharyngeal airways (PA) after RME in two distinct age-based cohorts of patients.

METHODS

This retrospective study included 48 subjects who underwent RME grouped in two cohorts: a 6-9-year-old group (EEG group: early expansion group - 25 subjects) and an 11-14-year-old group (LEG group: late expansion group - 23 subjects). NC and PA volumes were analyzed from CBCT imaging segmentation before RME (T0) and twelve months after RME (T1). The amount of maxillary expansion (PW) and minimal cross-sectional area (CSmin) were also considered.

RESULTS

All PAs' volumetric sub-regions, CSmin and PW showed a significant volumetric increment (p < 0.05). Inter-group comparisons showed significant differences (p < 0.05) for nasopharynx and CSmin parameters (p < 0.05), while no significant changes were recorded for the other UA's sub-regions and PW (p > 0.05). According to a deviation analysis, part of the UA increase (more marked for the nasopharynx area) may have occurred due to reduced adenotonsillar tissues, which were larger in the EEG group.

CONCLUSIONS

Twelve months after treatment, clinicians should not expect changes in the UAs dimensions to be solely related to treatment effects of RME; instead, normal craniofacial growth changes and spontaneous regression of the adenotonsillar tissue could represent the most significant factors influencing UAs changes.

CLINICAL SIGNIFICANCE

From the clinical perspective, the results of the present study encourage caution when considering the therapeutic effects of RME on airways dimensions.

Pregnancy related factors and temporomandibular disorders evaluated through the diagnostic criteria for temporomandibular disorders (DC/TMD) axis II: a cross sectional study

INTRODUCTION

Temporomandibular disorder (TMD) is a multifaceted condition impacting the chewing system, with its frequency varying across different age groups and showing a higher incidence in women. The involvement of estrogen in TMD has been examined due to the presence of estrogen receptors in the TMJ area. However, the exact effect of estrogen on TMD is complex. During pregnancy, marked by significant hormonal fluctuations, the impact on TMD has been hypothesized but remains unclear due to inconsistent results from various studies.

METHODS

In this cross-sectional study, we enrolled 32 pregnant women consecutively. We gathered information on demographics, TMD evaluations (using the Graded Chronic Pain Scale, Jaw Functional Limitation Scale-20, and Oral Behaviors Checklist), and mental health assessments (including Patient Health Questionnaire-9, Patient Health Questionnaire-15, and Generalized Anxiety Disorder-7). We employed descriptive statistics to summarize continuous and categorical data and used t-tests and chi-square tests for comparisons. We also conducted multivariate linear regression, adjusted for demographic factors, to investigate correlations.

RESULTS

The study group mainly consisted of women aged 30-35 (40.6%) and 25-30 (18.8%). Most participants had completed high school (50%) and were married (71.9%). A notable association was found between younger women (under 30) and higher levels of somatic symptoms (p = 0.008) and generalized anxiety (p = 0.015). Women in their second trimester showed lower severity of somatic symptoms (p = 0.04). A significant link was also observed between depression severity and somatic symptom severity (p = 0.01). However, we found no significant correlations with other TMD-related health aspects.

DISCUSSION

Our study identified significant associations between psychosomatic and psychological symptoms with variables like age and pregnancy trimester in pregnant women. However, it notably failed to establish a clear relationship between pregnancy-related factors and the severity of temporomandibular disorders (TMD). More comprehensive studies with larger participant pools are necessary to further validate and expand these findings.

Evaluation of three-dimensional reconstructed palatal morphology in skeletal class III subjects with different vertical patterns using cone beam computed tomography

BACKGROUND

This study aims to evaluate the difference of three-dimensional (3D) reconstructed palatal morphology between subjects with skeletal Class III and skeletal Class I in different vertical patterns using cone beam computed tomography (CBCT).

METHODS

In this study, 89 subjects with skeletal Class III (49 females, 40 males; 25.45 ± 3.81 years) and 85 subjects with skeletal Class I (45 females, 40 males; 23.95 ± 4.45 years) were collected retrospectively and divided into hyperdivergent, normodivergent and hypodivergent groups. Dolphin software was used to reorient the CBCT images of these subjects. After segmenting 3D object of maxilla from the 3D skull by ProPlan software, Geomagic Studio was used to reconstruct 3D palatal morphology and establish an average 3D palatal morphology for each group. The differences of 3D palatal morphology between different groups were compared by deviation patterns on 3D colored map analysis.

RESULTS

3D colored map analysis showed the posterior part of male's palate was higher and wider than that of female's palate in skeletal Class III subjects. In skeletal Class III subjects, males with hyperdivergent pattern had a higher and narrower palate compared with hypodivergent subjects, while females with hyperdivergent had a higher but not obviously narrower palate compared with hypodivergent subjects. In the similar vertical patterns, skeletal Class III subjects had a flatter but not narrower palate compared with skeletal Class I subjects, along with a smaller palate volume.

CONCLUSIONS

This method allows more intuitive between-group comparisons of the differences of 3D palatal morphology. In skeletal Class III subjects, as the vertical dimension increased, the palate tends to be higher and narrower. Therefore, the influence of vertical patterns on the palatal morphology should be fully considered in the orthodontic and orthognathic treatment of skeletal Class III subjects.

Analysis of maxillary asymmetry before and after treatment of functional posterior cross-bite: a retrospective study using 3D imaging system and deviation analysis

BACKGROUND

Previous evidence would suggest that subjects affected by functional posterior cross-bite (FPXB) present an asymmetric morphology of the maxilla. However, no evidence is available concerning the morphology (symmetry/asymmetry) of the maxilla after treatment of FPXB. This study aimed to investigate the volumetric and morphological changes of the palate in FPXB subjects treated with maxillary expansion and to compare these data with an untreated control group. The study sample included 20 FPXB subjects (mean age 8.1 ± 0.9 years) who underwent maxillary expansion (MEG group) and 21 FPXB subjects (mean age 7.7 ± 1.2 years) as controls (CG group). Digital models were recorded at T0 (first observation) and T1 (12-18 months after first observation) and analyzed to assess palatal volume and symmetry. Deviation analysis and percentage matching calculation were also performed between original and mirrored palatal models for each patient. All data were statistically analyzed for intra-timing, inter-timing and inter-groups assessments.

RESULTS

At T0, the cross-bite side (CBS) was significantly smaller than non-cross-bite side (non-CBS) in both groups (p < 0.05). At T1, the CBS/non-CBS difference reduced significantly in the MEG group (p < 0.05) while slightly worsened in the CG, however without statistical significance (p > 0.05). The matching percentage of the palatal models improved significantly at T1 in the MEG group (T0 = 74.02% ± 9.8; T1 = 89.95% ± 7.12) (p < 0.05) while no significant differences were recorded in the CG (T0 = 76.36 ± 8.64; 72.18% ± 9.65) (p > 0.05).

LIMITATIONS

The small sample size and the retrospective design of the study represent two limitations that should be overcome with further clinical trials.

CONCLUSIONS

Subjects with FPXB present an asymmetric development of the maxillary vault that improves after reestablishment of normal occlusion following maxillary expansion.

Characteristics of Mandibular Arch Forms in Patients with Skeletal Mandibular Prognathism

Arch forms in orthodontics are considered to affect occlusal stability. This study's subjects were 47 patients (Class III S group) who visited the Chiba Dental Center of Tokyo Dental College and were surgical orthodontic cases, and 60 patients with Class I malocclusion were selected as the control group. A mandibular model of each subject was plotted with each tooth on a digitizer. The clinical bracket points of each tooth were plotted, and intercanine and intermolar measurements were taken. The least squares method was used to fit a quartic equation, and the arch form was drawn. The Class IIIS group was divided by Wits appraisal and facial pattern into a dolichofacial or brachyfacial pattern, and arch forms were compared. The results show that the Class IIIS group had a significantly smaller intermolar width, canine depth, and molar depth and a significantly larger canine W/D ratio. In those with a dolichofacial pattern, the anterior curve of the arch form tended to be flat and the posterior curve narrower. This is because, in skeletal mandibular prognathism, the mandibular anterior shows lingual tipping, and the molars show palatal tipping due to dental compensation, and it was inferred that this tendency was higher in high-angle cases.

Accuracy of 3-dimensional-printed customized transfer tray using a flash-free adhesive system in digital indirect bonding: An in vivo study

INTRODUCTION

This paper evaluated the accuracy of a computer-aided design and manufacturing indirect bonding technique using a new customized 3D-printed transfer tray and a flash-free adhesive system for orthodontic bonding.

METHODS

This in vivo study analyzed 106 teeth selected from 9 patients undergoing orthodontic treatment. Quantitative deviation analysis was performed to evaluate the bonding positioning errors, assessing the differences between the virtually planned and the clinically transferred bracket position after indirect bonding procedures by superimposing 3-dimensional dental scans. Estimated marginal means were evaluated for individual brackets and tubes, arch sectors, and overall collected measurements.

RESULTS

A total of 86 brackets and 20 buccal tubes were analyzed. Among individual teeth, mandibular second molars showed the highest positioning errors, whereas maxillary incisors reported the lowest values. Considering arch sectors, the posterior areas showed greater displacements than the anterior areas, as the right side compared to the left side, with a higher error rate reported for the mandibular arch than the maxillary arch. The overall bonding inaccuracy measurement was 0.35 mm, below the clinical acceptability limit of 0.50 mm.

CONCLUSIONS

The accuracy of a 3-dimensional-printed customized transfer tray using a flash-free adhesive system in computer-aided design and manufacturing indirect bonding was generally high, with greater positioning errors for posterior teeth.

Gender and age effects on dental and palatal arch dimensions among full siblings

PURPOSE

This study was conducted to investigate the dental and palatal arch dimensions of male and female siblings in relation to gender and age, using three-dimensional (3D) digital casts.

METHODS

This study involved 54 subjects (27 pairs) of male-female siblings aged 15 to 45 years. Dental casts were digitized and analyzed for tooth size (TS), arch width (AW), arch length (AL), arch length discrepancy (ALD), and palatal arch dimensions (PAD). The data obtained were subjected to t-tests, and the palatal curvature (PC) was modeled using a fourth-order polynomial.

RESULTS

Significant differences (P < 0.05) between the sexes were found in the mesiodistal TS, particularly in all canines, as well as 16, 36, 46, and 41. Maxillary AW and AL were also significantly (P < 0.05) influenced by sexes. Most arch parameters were more prominent in male siblings, and the effect of age on PC differed between the sexes. In addition, the PC of adolescent females was mostly superimposed on adult females relative to males.

CONCLUSION

Among siblings, males were found to have significantly larger dental arch dimensions than females. Furthermore, PC showed some differences between the sexes in both the frontal and sagittal planes.

Palatal changes after treatment of functional posterior cross-bite using elastodontic appliances: a 3D imaging study using deviation analysis and surface-to-surface matching technique

BACKGROUND

The present study aimed to evaluate the changes in palate dimension and morphology after treatment of functional posterior crossbite (FPXB) with elastodontic devices (EAs).

METHODS

The treatment group (TG) consisted of 25 subjects (mean age 7.3 ± 0.9 years) who received treatment with EA for one year. The control group (CG) comprised 14 untreated subjects (mean age 6.8 ± 0.7 years).

INCLUSION CRITERIA

intra-oral scan registered before (T0) and after treatment (T1), FPXB with a mandibular shift towards the crossbite site of ≥ 2 mm, class I molar relationship.

EXCLUSION CRITERIA

missing teeth, anterior crossbite, temporomandibular disorders, previous orthodontic treatment, carious lesions, mobility of deciduous posterior teeth, craniofacial deformities. Digital models were analyzed to assess the inter-canine (ICW) and inter-molar widths (IMW) and the corresponding emi-lateral measurements (eICW and eIMW) using the median palatine plane as reference. According to a specific 3D imaging technology, the morphology and symmetry of the palate was investigated by analysing the 3D deviation between the two specular models of the palate.

RESULTS

At T0, both groups showed a significantly narrower dimension of eICW and eIMW at the crossbite side compared to the non-crossbite side (p < 0.05). Also, the 3D deviation analysis demonstrates a limited matching percentage of the original/mirrored models in both TG (81.12%) and CG (79.36%), confirming the asymmetry of the palate. The area of mis-matching was located at the alveolar bone level. At T1, subjects in the TG showed a significant increment of ICW and IMW (p < 0.05), a reduction of the differences of eICW and eIMW between both sides (p < 0.05) and an increment of the percentage matching (TG = 92.32%) (p < 0.05), suggesting a significant recovery of the palatal asymmetry. No significant changes were found between T0 and T1 in the CG (p > 0.05).

CONCLUSIONS

EAs could be successfully used to correct FPXB in mixed dentition and could restore the harmonious development of the palate in children.

Introducing surface-to-surface matching technique to evaluate mandibular symmetry: A retrospective study

Objectives

This study introduced a three-dimensional (3D) surface-to-surface matching technique to evaluate the mandibular symmetry of teenagers and adults with unilateral second molar scissor bite.

Methods

The targets came from 73 cone-beam computed tomography (CBCT) images with unilateral second molar scissor bite, including teenagers (n = 30) and adults (n = 43). 73 images without scissor bite and matched in sex and age were selected as controls. The scans were developed into 3D mandible models and seven mandibular functional unit models, including condylar process (Co), coronoid process (Cr), mandibular ramus (Ra), mandibular angle (Ma), alveolar process (Ap), mandibular body (Mb) and chin process (Ch). The surface-to-surface matching technique was introduced. 3D deviation analysis and matching percentages calculation were performed and compared to evaluate the symmetry of the mandible.

Results

Comparisons were made between the study samples and control samples. For teenagers, the matching percentages of the entire mandible (55.31 ± 7.24%), Mb (69.04 ± 9.22%) and Co (65.19 ± 10.67%) in the study group were lower than that of the entire mandible (60.87 ± 6.38%) (P <0.01), Mb (75.0 ± 8.71%) (P <0.05) and Co (70.25 ± 8.20%) (P <0.05) in the control group. While Ap, Ra, Ch, Cr and Ma showed no statistically significant differences (P >0.05). For adults, the matching percentages of the entire mandible (48.88 ± 9.77%), Ap (65.83 ± 11.21%), Mb (64.43 ± 12.03%), Ch (79.17 ± 10.29%), Ra (64.11 ± 9.84%) and Co (61.08 ± 11.64%) in the study group were lower than the entire mandible (59.28 ± 5.49%) (P <0.01), Ap (73.65 ± 9.10%) (P <0.01), Mb (71.66 ± 8.40%) (P <0.01), Ch (83.86 ± 5.59%) (P <0.05), Ra (68.54 ± 7.87%) (P <0.05) and Co (66.20 ± 10.62%) (P <0.05) of the control group. Only Cr and Ma showed no statistically significant differences (P >0.05).

Conclusion

Mandibular asymmetry was observed in both teenagers and adults with unilateral second molar scissor bite. Moreover, compared with teenagers, more mandibular units of adult patients were affected.

Clinical significance

Based on the surface-to-surface matching technique, the symmetric and morphological information of the mandible can be converted into visual color maps and quantitative descriptions. This method can bring convenience to the study of the growth of mandible, orthodontic treatment and orthognathic surgery design.

Assessment of the accuracy of imaging software for 3D rendering of the upper airway, usable in orthodontic and craniofacial clinical settings

BACKGROUND

Several semi-automatic software are available for the three-dimensional reconstruction of the airway from DICOM files. The aim of this study was to evaluate the accuracy of the segmentation of the upper airway testing four free source and one commercially available semi-automatic software. A total of 20 cone-beam computed tomography (CBCT) were selected to perform semi-automatic segmentation of the upper airway. The software tested were Invesalius, ITK-Snap, Dolphin 3D, 3D Slicer and Seg3D. The same upper airway models were manually segmented (Mimics software) and set as the gold standard (GS) reference of the investigation. A specific 3D imaging technology was used to perform the superimposition between the upper airway model obtained with semi-automatic software and the GS model, and to perform the surface-to-surface matching analysis. The accuracy of semi-automatic segmentation was evaluated calculating the volumetric mean differences (mean bias and limits of agreement) and the percentage of matching of the upper airway models compared to the manual segmentation (GS). Qualitative assessments were performed using color-coded maps. All data were statistically analyzed for software comparisons.

RESULTS

Statistically significant differences were found in the volumetric dimensions of the upper airway models and in the matching percentage among the tested software (p < 0.001). Invesalius was the most accurate software for 3D rendering of the upper airway (mean bias = 1.54 cm³; matching = 90.05%) followed by ITK-Snap (mean bias =  - 2.52 cm³; matching = 84.44%), Seg 3D (mean bias = 3.21 cm³, matching = 87.36%), 3D Slicer (mean bias =  - 4.77 cm³; matching = 82.08%) and Dolphin 3D (difference mean =  - 6.06 cm³; matching = 78.26%). According to the color-coded map, the dis-matched area was mainly located at the most anterior nasal region of the airway. Volumetric data showed excellent inter-software reliability (GS vs semi-automatic software), with coefficient values ranging from 0.904 to 0.993, confirming proportional equivalence with manual segmentation.

CONCLUSION

Despite the excellent inter-software reliability, different semi-automatic segmentation algorithms could generate different patterns of inaccuracy error (underestimation/overestimation) of the upper airway models. Thus, is unreasonable to expect volumetric agreement among different software packages for the 3D rendering of the upper airway anatomy.

Testing the Accuracy of Pont’s Index in Diagnosing Maxillary Transverse Discrepancy as Compared to the University of Pennsylvania CBCT Analysis

Assessment of maxillary transverse discrepancy requires an accurate tool in order to implement the appropriate treatment plan. Aim: To evaluate the accuracy of Pont’s Index in confirming a transverse maxillary deficiency by comparing its results with the corresponding results yielded by the University of Pennsylvania CBCT analysis. Material and methods: The study was performed on dental casts and CBCT’s of 60 randomly selected patients by adopting a cluster sampling method. The results of Pont’s Index and University of Pennsylvania CBCT analysis were analyzed through McNemar’s test using Excel Data Analysis, and the accuracy indicators for Pont’s Index were computed using MedCalc Ltd. Results: Mc Nemar’s test revealed a p-value of 0.85. The accuracy indicators of Pont’s Index were: sensitivity: 69%; specificity: 16.6%; positive predictive value: 65%; negative predictive value: 18.75%; positive likelihood ratio: 0.83; negative likelihood ratio: 1.86; and accuracy: 53.28%. Conclusion: Due to the fact that CBCT is not used on a daily basis and Pont’s Index has a relatively high sensitivity (69%) making it suitable to detect patients with a narrow maxilla, assessment of the maxillary deficiency on CBCT can be recommended for cases were the midpalatal suture maturation should be evaluated.

Pain Reduction during Rapid Palatal Expansion Due to LED Photobiomodulation Irradiation: A Randomized Clinical Trial

Objective: The purpose of this research is to assess the analgesic efficiency of Photobiomodulation (PBM) in pain reduction in young patients during rapid maxillary expansion therapy. Materials and Methods: Thirty patients were included and allocated to an experimental group [Rapid Palatal Expansion (RPE) and PBM] and a control group (RPE only) at random. Inclusion criteria were skeletal age from CVS1 to CVS3, examined on the cephalometric lateral teleradiography, with cervical vertebra staging and completed eruption of upper first molar. Exclusion criteria were previous orthodontic treatment, bone disease, disability, or skeletal age from CVS4. Patients referred the pain they felt using a Numerical scale rate (NRS), ranging from 0 to 10, with specific intervals of time: 6 h, 12 h, 24 h, and from days 2 to 7. The Wilcoxon-Mann-Whitney test was used to evaluate differences in NRS reported values between the two groups. Results: The final sample included 30 patients, 14 males and 16 females, with a mean age of 7.8 ± 1.2 years. The pain that was felt at each time interval and the maximum score of pain were significantly lower in the experimental group (p < 0.05) and decreased faster in the experimental group, with a score test near to 0 after 2/3 days. Conclusions: PBM is efficient in reducing the intensity and the time of pain felt by young patients that undergo rapid maxillary expansion.

Class II Skeletal Malocclusion and Prevalence of Temporomandibular Disorders. An Epidemiological Pilot Study on Growing Subjects

The purpose of our work is to evaluate the correlation between skeletal Class II malocclusion and temporomandibular disorders, by assessing potential different frequency scores compared with Class I and Class III skeletal malocclusion, and to evaluate associated etiological and risk factors. Fifty-five subjects were examined, 35 females and 20 males, with a mean age of 18 ± 1.3 years, divided into two groups: those with TMD and those without TMD, and prevalence was evaluated in the two groups of Class II subjects. Symptoms and more frequent signs were also examined in the TMD group. Regarding Group A (subjects with the presence of TMD), we found that 48% have a Class II, 16% have Class I, and 28% have Class III. In the totality of the group A sample, only 8% were male subjects. In Group B (subjects without TMD), we found that 40% were females, with 26.7% in Class I, 10% in Class II, and 3.3% in Class III; the male subjects in this group (60%) were distributed with 33.3% in Class I, 16.7% in Class II, and 10% in Class III. Class II malocclusion is not a causal factor of TMD but may be considered a predisposing factor.

Digital analysis of tooth sizes among individuals with different malocclusions: A study using three-dimensional digital dental models

OBJECTIVE

It is aimed to examine the tooth sizes of digital models of patients with different malocclusions with the help of three-dimensional measurement software.

METHODS

Digital models of 252 patients aged between 13 and 25 years of age were included. According to the Angle classification, three different malocclusion groups were allocated such that there were 84 patients in each group, plaster models of patients scanned with the three-dimensional model browser 3Shape R700 3D Scanner (3Shape A/S Copenhagen, Denmark) and transferred to the digital format. 3Shape Ortho Analyzer (3Shape A/S Copenhagen, Denmark) software was used for making the necessary tooth size measurements.

RESULTS

When the measurements were evaluated, it was determined that significant changes occurred between tooth sizes of individuals with different malocclusions. Generally, higher values were observed in mesiodistal and buccolingual tooth dimensions of class II individuals compared to other groups. There was no difference between the groups in the anterior ratio values, but when the overall ratio values were evaluated among the groups, a statistically significant difference was determined. Class II malocclusion group was found to have a significantly lower overall ratio of occurrence.

CONCLUSION

Individuals with different malocclusions differ in tooth size.

Fully automatic segmentation of sinonasal cavity and pharyngeal airway based on convolutional neural networks

INTRODUCTION

This study aimed to test the accuracy of a new automatic deep learning-based approach on the basis of convolutional neural networks (CNN) for fully automatic segmentation of the sinonasal cavity and the pharyngeal airway from cone-beam computed tomography (CBCT) scans.

METHODS

Forty CBCT scans from healthy patients (20 women and 20 men; mean age, 23.37 ± 3.34 years) were collected, and manual segmentation of the sinonasal cavity and pharyngeal subregions were carried out by using Mimics software (version 20.0; Materialise, Leuven, Belgium). Twenty CBCT scans from the total sample were randomly selected and used for training the artificial intelligence model file. The remaining 20 CBCT segmentation masks were used to test the accuracy of the CNN fully automatic method by comparing the segmentation volumes of the 3-dimensional models obtained with automatic and manual segmentations. The accuracy of the CNN-based method was also assessed by using the Dice score coefficient and by the surface-to-surface matching technique. The intraclass correlation coefficient and Dahlberg's formula were used to test the intraobserver reliability and method error, respectively. Independent Student t test was used for between-groups volumetric comparison.

RESULTS

Measurements were highly correlated with an intraclass correlation coefficient value of 0.921, whereas the method error was 0.31 mm³. A mean difference of 1.93 ± 0.73 cm³ was found between the methodologies, but it was not statistically significant (P >0.05). The mean matching percentage detected was 85.35 ± 2.59 (tolerance 0.5 mm) and 93.44 ± 2.54 (tolerance 1.0 mm). The differences, measured as the Dice score coefficient in percentage, between the assessments done with both methods were 3.3% and 5.8%, respectively.

CONCLUSIONS

The new deep learning-based method for automated segmentation of the sinonasal cavity and the pharyngeal airway in CBCT scans is accurate and performs equally well as an experienced image reader.

In Vitro and In Vivo Assessment of a New Workflow for the Acquisition of Mandibular Kinematics Based on Portable Tracking System with Passive Optical Reflective Markers

Clinical use of portable optical tracking system in dentistry could improve the analysis of mandibular movements for diagnostic and therapeutic purposes. A new workflow for the acquisition of mandibular kinematics was developed. Reproducibility of measurements was tested in vitro and intra- and inter-rater repeatability were assessed in vivo in healthy volunteers. Prescribed repeated movements (n = 10) in three perpendicular directions of the tracking-device coordinate system were performed. Measurement error and coefficient of variation (CV) among repetitions were determined. Mandibular kinematics of maximum opening, left and right laterality, protrusion and retrusion of five healthy subjects were recorded in separate sessions by three different operators. Obtained records were blindly examined by three observers. Intraclass correlation coefficient (ICC) was calculated to estimate inter-rater and intra-rater reliability. Maximum in vitro measurement error was 0.54 mm and CV = 0.02. Overall, excellent intra-rater reliability (ICC > 0.90) for each variable, general excellent intra-rater reliability (ICC = 1.00) for all variables, and good reliability (ICC > 0.75) for inter-rater tests were obtained. A lower score was obtained for retrusion with “moderate reliability” (ICC = 0.557) in the inter-rater tests. Excellent repeatability and reliability in optical tracking of primary movements were observed using the tested portable tracking device and the developed workflow.

Evaluation of pulp cavity/chamber changes after tooth-borne and bone-borne rapid maxillary expansions: a CBCT study using surface-based superimposition and deviation analysis

OBJECTIVES

To compare volume and shape changes of pulp chamber of maxillary posterior teeth between tooth-borne and bone-borne maxillary expansions in adolescents.

MATERIALS AND METHODS

This study included 36 adolescents with bilateral maxillary crossbite who received tooth-borne rapid maxillary expansion (TB group, average age 14.4 years) or bone-borne rapid maxillary expansion (BB group, average age 14.7 years). Cone beam computed tomography (CBCT) was taken before treatment (T1) and after a 6-month retention period (T2). Volumetric and shape changes of pulp chamber of maxillary first molars and premolars were detected by referring to a specific 3D digital technology involving deviation analysis of T1/T2 CBCT-derived models of pulp chamber. Student's t tests were used to (1) compare T1 and T2 volumes of pulp chambers in TB and BB groups and (2) assess differences between the two groups in the post-treatment volumetric changes and in the percentage of matching of 3D pulp models.

RESULTS

All investigated teeth showed a reduction of pulp volume, being this difference significant in both TB (p < 0.0001) and BB (p < 0.0001) groups. The volumetric reduction was greater in the TB group; also, subjects in the TB group showed a lower percentage of matching between T1 and T2 pulp models (p < 0.0001). The area most affected by shape change was that of pulp horns.

CONCLUSIONS

TB expander could induce a higher volumetric reduction of pulp chamber of posterior teeth compared with BB expander, in the short term.

CLINICAL RELEVANCE

The present findings add new information concerning the effects of RME protocols on pulp tissue.

Mandibular Advancement Devices (MAD) as a Treatment Alternative for Obstructive Sleep Apnea Syndrome (OSAS)

Background:

Continuous Positive Airways Pressure therapy (CPAP) is the gold standard treatment of the Obstructive Sleep Apnea Syndrome (OSAS), however, the scarce adherence to the therapy requires the evaluation of other therapeutic alternatives.

Objective:

The aim of the present study was to assess the effectiveness of Mandibular Advancement Devices (MAD) in subjects affected by OSAS who had interrupted the treatment with CPAP and to make comparative evaluations.

Methods:

Eighteen subjects (15 males and 3 females), aged between 27 and 60 years, with a diagnosis of moderate to severe OSAS were included. Inclusion criteria: polysomnographic examination before treatment (T0) and after 1 month from the beginning of the therapy with CPAP(T1), interruption of the treatment due to loss of compliance, Epworth Sleepiness Scale (ESS) questionnaire filled out at T0 and T1. Subjects started the treatment with MAD and polysonnographic examination was prospectively executed after 3 months (T2) and 1 year (T3). One-way analysis of the variance (ANOVA) was used to compare data of polysonnographic examination performed at T0, T1, T2 and T3 as well as the differences of ESS scores recorded at different timing.

Results:

Compared to baseline (T0), all functional parameters tested showed statistically significant differences at T1, T2 and T3 (p < 0.001), meanwhile no differences were found between data recorded after therapy with MAD (T2 and T3) and with CPAP (T1). Similar results were also found with the score of ESS among different timelines (p < 0.001).

Conclusion:

These findings suggest that MAD could be a valid alternative for the treatment of OSAS in those patients with scarce adherence to the CPAP therapy.

Root Resorption of Maxillary Posterior Teeth after Rapid Maxillary Expansion: A Comprehensive Review of the Current Evidence from in-vitro and in-vivo Studies

Background:

The application of heavy forces to the dentition, as those produced during a Rapid Maxillary Expansion (RME), has been associated in the literature with the development of root resorption of maxillary posterior teeth.

Objective:

The aim of the present manuscript was to report the available data from in-vitro and in-vivo studies that can elucidate the biological processes of resorption and repair of radicular cementum after RME.

Methods:

Studies evaluating the occurrence of root resorption after RME by means of histological and radiographic methodology were included. We detailed the changes of the radicular anatomy after RME and provided a synthesis of the most valuable scientific evidence showing the biological processes behind the potential modifications of radicular anatomy. Results. Loss of cementum material and reduction of radicular volumes were seen after rapid maxillary expansion. A small radicular volumetric recovery of anchored teeth occurred after the retention period; this reparative phenomenon was caused by cementum deposition without the reattachment of periodontal fibers, supporting the detrimental effects associated with RR.

Conclusion:

Retention period and the timing of radiographic examination could influence the extension of radicular resorption detected after RME since root resorption and cementum repair may occur at the same time at this stage.

Comparison between Additive and Subtractive CAD-CAM Technique to Produce Orthognathic Surgical Splints: A Personalized Approach

The present study aimed to evaluate the accuracy of digitally designed surgical splints generated with milling technology (material subtractive procedure) and with 3D printing technology (material additive procedure) through a customized approach in the planning of surgical orthognathic splints. Cone beam computed tomography (CBCT) examinations and scanned dental models of 10 subjects who had required surgical treatment of skeletal malocclusion were included. Simulation of the orthognathic surgery was performed according to dento-skeletal and aesthetic characteristics of the subjects and the visual treatment objective (VTO), using Dolphin3D software (Dolphin Imaging, version 11.0, Chatsworth, CA, USA). Afterward, the Appliance Designer software (3Shape A/S, Copenhagen, Denmark) was used to digitally design the surgical splints that were generated twice using laser stereolithography technology (DWS 0.29D, DWS, Vicenza, Italy) and milling technology (Sirona inLab MC X5). Finally, each physical splint was digitalized using a desktop scanner (D500 3D, 3Shape A/S, Copenhagen, Denmark) in order to perform deviation analysis using the original project as a reference. The relative percentage of matching (trueness) was calculated (Geomagic Control X software (3D Systems, version 2018.1.1, 3D Systems, Rock Hill, SC, USA). An Independent Student's t-test was used to statistically analyze the data. The milled splints showed a lower value of root to mean square (RMS) relative to the original project (0.20 mm ± 0.018) compared to the prototyped splints (0.31 ± 0.021) (p < 0.001). According to the present findings, surgical splints generated with milling technology present higher trueness compared with 3D printing technology.

Evaluation of mandibular symmetry and morphology in adult patients with unilateral posterior crossbite: a CBCT study using a surface-to-surface matching technique

OBJECTIVES

To investigate mandibular morphology in adults affected by posterior unilateral crossbite (PUXB) and to evaluate the hemi mandibular volumes from the crossbite (CB) and non-CB sides of the same patients.

METHODS

Thirty-eight cone beam computed tomography (CBCT) images were consecutively recruited and the Digital Imaging and Communications in Medicine (DICOM)-formatted scans were volume rendered into a surface three-dimensional (3D) mesh model and volumes to obtain the 3D model of the mandibular bone. To achieve the surface point-to-point analysis of the mandibular models, a reverse engineering software was used. The same procedure was performed for an age-matched control group (19 CBCT images).

RESULTS

Total mandibular volume showed a difference of 2.46 cm3 between patients and controls, which was not statistically significant. A mean difference of 1.53 cm3 was found comparing the hemi mandibular volumes from the CB and non-CB sides of PUXB patients, this difference was statistically significant (P ≤ 0.01). Findings for the surface-to-surface deviation analysis, demonstrated a higher percentage of mismatch in patients PUXB, over 10% at 0.5 mm tolerance level.

LIMITATIONS

Limitations are related to the intrinsic surfaces matching methodology, that make difficult to evaluate discrepancies among different mandibular anatomical units.

CONCLUSION

Adult patients affected by PUXB show a greater mandibular structural asymmetry compared to controls because of a lower matching percentage obtained from the surface-to-surface matching technique.

IMPLICATIONS

Treatment of adult patients affected by PUXB should take into consideration the possibility of a mild mandibular asymmetry mainly localized at the condyle and gonial angle levels.

Evaluation of the changes of orbital cavity volume and shape after tooth-borne and bone-borne rapid maxillary expansion (RME)

Objective

To assess and compare volumetric and shape changes of the orbital cavity in patients treated with tooth-borne (TB) and bone-borne (BB) rapid maxillary expansion (RME).

Study design

Forty adolescents with bilateral maxillary cross-bite received tooth-borne (TB group = 20; mean age 14.27 ± 1.36 years) or bone-borne (BB group = 20; mean age of 14.62 ± 1.45 years) maxillary expander. Cone-beam computed tomography (CBCT) were taken before treatment (T1) and 6-month after the expander activation (T2). Volumetric and shape changes of orbital cavities were detected by referring to a specific 3D digital technology involving deviation analysis of T1/T2 CBCT-derived models of pulp chamber. Student’s t tests were used to 1) compare T1 and T2 volumes of orbital cavities in TB and BB groups, 2) compare volumetric changes and the percentage of matching of 3D orbital models (T1-T2) between the two groups.

Results

Both TB and BB groups showed a slight increase of the orbital volume (0.64 cm³ and 0.77 cm³) (p < 0.0001). This increment were significant between the two groups (p < 0.05) while no differences were found in the percentage of matching of T1/T2 orbital 3D models (p > 0.05). The areas of greater changes were detected in the proximity of the frontozygomatic and frontomaxillary sutures.

Conclusion

TB-RME and BB-RME would not seem to considerably affect the anatomy or the volume of the orbital cavity in adolescents.

Evaluation of Imaging Software Accuracy for 3-Dimensional Analysis of the Mandibular Condyle. A Comparative Study Using a Surface-to-Surface Matching Technique

The aim of this study was to assess the accuracy of 3D rendering of the mandibular condylar region obtained from different semi-automatic segmentation methodology. A total of 10 Cone beam computed tomography (CBCT) were selected to perform semi-automatic segmentation of the condyles by using three free-source software (Invesalius, version 3.0.0, Centro de Tecnologia da Informação Renato Archer, Campinas, SP, Brazil; ITK-Snap, version2.2.0; Slicer 3D, version 4.10.2) and one commercially available software Dolphin 3D (Dolphin Imaging, version 11.0, Chatsworth, CA, USA). The same models were also manually segmented (Mimics, version 17.01, Materialise, Leuven, Belgium) and set as ground truth. The accuracy of semi-automatic segmentation was evaluated by (1) comparing the volume of each semi-automatic 3D rendered condylar model with that obtained with manual segmentation, (2) deviation analysis of each 3D rendered mandibular models with those obtained from manual segmentation. No significant differences were found in the volumetric dimensions of the condylar models among the tested software (p > 0.05). However, the color-coded map showed underestimation of the condylar models obtained with ITK-Snap and Slicer 3D, and overestimation with Dolphin 3D and Invesalius. Excellent reliability was found for both intra-observer and inter-observer readings. Despite the excellent reliability, the present findings suggest that data of condylar morphology obtained with semi-automatic segmentation should be taken with caution when an accurate definition of condylar boundaries is required.

One Step before 3D Printing-Evaluation of Imaging Software Accuracy for 3-Dimensional Analysis of the Mandible: A Comparative Study Using a Surface-to-Surface Matching Technique

The accuracy of 3D reconstructions of the craniomaxillofacial region using cone beam computed tomography (CBCT) is important for the morphological evaluation of specific anatomical structures. Moreover, an accurate segmentation process is fundamental for the physical reconstruction of the anatomy (3D printing) when a preliminary simulation of the therapy is required. In this regard, the objective of this study is to evaluate the accuracy of four different types of software for the semiautomatic segmentation of the mandibular jaw compared to manual segmentation, used as a gold standard. Twenty cone beam computed tomography (CBCT) with a manual approach (Mimics) and a semi-automatic approach (Invesalius, ITK-Snap, Dolphin 3D, Slicer 3D) were selected for the segmentation of the mandible in the present study. The accuracy of semi-automatic segmentation was evaluated: (1) by comparing the mandibular volumes obtained with semi-automatic 3D rendering and manual segmentation and (2) by deviation analysis between the two mandibular models. An analysis of variance (ANOVA) was used to evaluate differences in mandibular volumetric recordings and for a deviation analysis among the different software types used. Linear regression was also performed between manual and semi-automatic methods. No significant differences were found in the total volumes among the obtained 3D mandibular models (Mimics = 40.85 cm³, ITK-Snap = 40.81 cm³, Invesalius = 40.04 cm³, Dolphin 3D = 42.03 cm³, Slicer 3D = 40.58 cm³). High correlations were found between the semi-automatic segmentation and manual segmentation approach, with R coefficients ranging from 0,960 to 0,992. According to the deviation analysis, the mandibular models obtained with ITK-Snap showed the highest matching percentage (Tolerance A = 88.44%, Tolerance B = 97.30%), while those obtained with Dolphin 3D showed the lowest matching percentage (Tolerance A = 60.01%, Tolerance B = 87.76%) (p < 0.05). Colour-coded maps showed that the area of greatest mismatch between semi-automatic and manual segmentation was the condylar region and the region proximate to the dental roots. Despite the fact that the semi-automatic segmentation of the mandible showed, in general, high reliability and high correlation with the manual segmentation, caution should be taken when evaluating the morphological and dimensional characteristics of the condyles either on CBCT-derived digital models or physical models (3D printing).

The step further smile virtual planning: milled versus prototyped mock-ups for the evaluation of the designed smile characteristics

BACKGROUND

Mock-up based approach allows the preview of the aesthetic rehabilitation, however, it is crucial that the mock-up does not differ from the expected aesthetic outcomes. With CAD-CAM technologies, it is possible to directly create mock-ups from virtual planned smile project, with greater accuracy and efficiency compared to the conventional moulded mock-ups. In this study, we investigated the trueness of mock-ups obtained with milling and 3D printing technology and a full digital work-flow system.

METHODS

Ten adults subjects were included and digital smile design/digital wax-up were performed to enhance the aesthetic of maxillary anterior region. Ten milled mock-ups and 10 prototyped mock-ups were obtained from the original .stl file and a digital analysis of trueness was carried out by superimposing the scanned-milled mock-ups and the scanned-prototyped mock-ups to the digital wax-up, according to the surface-to-surface matching technique. Specific linear measurements were performed to investigate and compare the dimensional characteristics of the physical manufactures, the 3D project and the scanned mock-ups. All data were statistically analyzed. A clinical test was also performed to assess the fitting of the final manufacture.

RESULTS

The prototyped mock-ups showed a significant increment of the transversal measurements (p < 0.001) while the milled mock-ups showed a significant increment of all vertical and transversal measurements (p < 0.001). The prototyped mock-ups showed good fitting after clinical tests while none of the milled mock-ups showed good adaptation (no fitting or significant clinical compensation required). Deviation analysis from the original 3D project reported a greater matching percentage for the scanned-milled mock-ups (80,31% ± 2.50) compared to the scanned-prototyped mock-ups (69,17% ± 2.64) (p < 0.001). This was in contrast with the findings from linear measurements as well as from the clinical test and may have been affected by a reductive algorithmic computation after digitization of physical mock-ups.

CONCLUSION

Both prototype and milled mock-ups showed a slight dimensional increment comparing to the original 3D project, with milled-mock-ups showing less fitting after clinical tests. Caution must be taken when assessing the trueness of scanned manufacture since an intrinsic error in the system can underestimate the dimensions of the real object.

Craniomandibular Disorders in Pregnant Women: An Epidemiological Survey

Temporomandibular joint (TMJ) disorder has been reported to be 1.5 to two times more common in women than men. Such a gender-based difference could be attributed to behavioral, hormonal, anatomical, and psychological characteristics. Physiological hormonal differences between genders could be one of the possible explanations for the higher incidence of temporomandibular disorder (TMD) in women. As the plasma level of certain female hormones increases during gestation, it could be assumed that there is a higher prevalence of dysfunctional signs and symptoms in pregnant women. We performed an epidemiological survey based on screening for TMD in a group of 108 pregnant women and found that 72% of young women reported significant signs of TMJ disorders, 9% of the young women reported mild signs of TMJ disorders, and 19% of the included subjects reported no signs or symptoms of TMD. The presence of estrogen receptors in the temporomandibular joint of female baboons could be the basis of an explanation for the increased prevalence of dysfunction in young women reported in the literature and the high feedback we have seen of joint noises in pregnant women. On the basis of the present findings, it could be assumed that gestation period could represent a risk factor for craniomandibular dysfunctions.

Palatal changes in crossbite patients treated with rapid maxillary expansion vs untreated ones: A geometric morphometric study

OBJECTIVE

The present study aimed to analyse palatal changes due to rapid maxillary expansion (RME) by using modern geometric morphometric analysis (GMA) on 3D models.

SETTINGS AND SAMPLE POPULATION

Forty children with posterior crossbite and maxillary deficiency were selected for this study. Twenty children were treated with RME (mean age 7.4 ± 0.8 years), whereas 20 children were not treated (mean age 7.2 ± 1.1 years).

MATERIALS AND METHODS

In the treated group, RME screw was activated until overcorrection was achieved and the RME appliance remained in place for 11 months. Digital dental casts were recorded before treatment and 1 year after the end of active treatment. GMA was performed to compare shape and dimensional variations among groups (between-group principal component analysis).

RESULTS

All children in the treated group achieved crossbite correction. None of the control group children achieved crossbite self-correction. No significant shape and dimensional changes were noted in the control group after 1 year. On the other hand, significant shape and dimensional changes were noted in the treated group after 1 year (P < .05). Most of the shape changes in the treated group were similar but more pronounced compared to those observed in the control group. All major changes in palatal morphology occurred on the lateral sides of the palatal vault (widening) and at the height (shortening). Some shape changes were observed in the treated group alone.

CONCLUSIONS

Application of GMA to evaluate the effects of RME in crossbite patients revealed significant changes in palatal morphology compared with the absence of changes in the control group.

Volumetric Changes in the Upper Airways after Rapid and Slow Maxillary Expansion in Growing Patients: A Case-Control Study

The aim is to evaluate changes in the volume of the upper airways before and after slow maxillary expansion (SME) obtained with the flexible properties of a nickel titanium leaf spring and rapid maxillary expansion (RME) with a conventional Hyrax appliance in growing patients. The records of 1200 orthodontic patients undergoing maxillary expansion from 2018 to 2019 were analyzed; among these pre and post treatment CBCT scans of 22 patients (mean age 8.2 ± 0.6 years old) treated by SME were compared with those obtained from 22 patients (mean age 8.1 ± 0.7 years old) treated by RME banded on the second primary molars. The following inclusion criteria were used: Maxillary transverse constriction, good general health, and no previous orthodontic treatment. Volumes of nasal cavity (NCavV), nasopharynx (NsPxV), and right and left maxillary sinuses (MSV) were calculated with ITK-SNAP. Shapiro–Wilk test revealed a normal distribution of data in each group. Paired t-test was used for within-group comparisons and independent t-test for between-group comparisons. Statistically significant increases occurred in NCavV, NsPxV, and MSVs after treatment with both appliances. No statistically significant difference between the appliances occurred in NCavV, NsPxV, and MSVs. Method error was considered negligible (mean intra-operator and inter-operator intraclass correlation coefficient were 0.928 and 0.911, respectively). It appears that both appliances produce similar effects on the different segments of the upper airway tract.

A Full Diagnostic Process for the Orthodontic Treatment Strategy: A Documented Case Report

The need for extractions in orthodontic treatment has always been a controversial topic. However, to date there is not a specific clinical guideline that can help the clinicians deciding to plan an extractive or a non-extractive orthodontic treatment. In this respect, clinicians must deal with patients’ occlusal, functional, periodontal and aesthetics characteristics before planning an orthodontic treatment including extraction. Considering the absence of specific guidelines, the choice to extract teeth or not is complicated, particularly in borderline cases. In this case report, we present a borderline case of a patient with the skeletal Class III pattern and significant crowding in both arches that could be treated with or without extraction, illustrating the diagnostic and decision-making processes that were conducted for the orthodontic treatment strategy.

The Efficacy of Retention Appliances after Fixed Orthodontic Treatment: A Systematic Review and Meta-Analysis

The purpose of this article is to evaluate the amount of the relapse of anterior crowding and the efficacy of retention appliances by reviewing the best available scientific evidence. A survey of articles published up to November 2019 about the stability of dental alignment and retention after fixed orthodontic treatment was performed using seven electronic databases. Study Selection: Only randomized clinical trials investigating patients previously treated with multi-bracket appliances with a follow-up period longer than 6 months were included. Data Extraction: Two authors independently performed the study selection, data extraction, and risk of bias assessment. All pooled data analyses were performed using a random-effects model. Statistical heterogeneity was evaluated. In total, eight randomized clinical trials (RCTs) were included, grouping data from 987 patients. The ages of the patients varied across the studies, ranging between 13 and 17 years. The observation period ranged between 6 and 24 months. The data showed no significant intercanine width modifications during the retention period with both fixed and removable retainers. A significant modification of Little’s Index was found for the mandibular removable retainers with a mean difference of 0.72 mm (95% Cl, 0.47 to 0.98) and for the maxillary removable retainers with a mean difference of 0.48 mm (95% Cl, 0.27 to 0.68). No significant changes were found by evaluating Little’s Index modification for the mandibular fixed retainers. The results of this meta-analysis showed that all the considered retainers were effective in maintaining dental alignment after fixed orthodontic treatment. However, fixed retainers showed greater efficacy compared to removable retainers.

Effects on the Facial Growth of Rapid Palatal Expansion in Growing Patients Affected by Juvenile Idiopathic Arthritis with Monolateral Involvement of the Temporomandibular Joints: A Case-Control Study on Posteroanterior and Lateral Cephalograms

BACKGROUND

Juvenile idiopathic arthritis (JIA) affecting temporomandibular joints (TMJ) in growing patients results in maxillofacial deformities, especially if only one condyle has been affected by the rheumatic disease. Mandibular hypoplasia is the most common issue and it may be associated with maxillary hypoplasia. The aim of this retrospective case-control study is to evaluate the effects of rapid maxillary expansion (RME) in these patients.

METHODS

25 growing patients affected by maxillary hypoplasia, currently in a quiescent phase of JIA for at least one year and monolateral involvement of the TMJs, were treated with RME. Data gathered from posteroanterior and lateral cephalograms before and after 1 year from RME were compared to those of 25 non-JIA controls.

RESULTS

Nasal cavity width, maxillary width and upper and lower intermolar width statistically increased. Maxillary and mandibular symmetry indexes presented a statistically significant increase, so did the skeletal class. No signs or symptoms of TMJ activity of JIA occurred according to Research Diagnostic Criteria for Temporomandibular Disorders (RDC/TMD) criteria. No difference was found when comparing JIA and non-JIA patients apart from the better improvement of several mandibular symmetry indexes in the affected TMJ side of JIA patients. This event is allegedly due to a worse baseline asymmetry in JIA patients that underwent a bigger relative improvement after treatment.

CONCLUSIONS

Results suggest that solving maxillary hypoplasia and, therefore, premature contacts are likely to have allowed mandibular repositioning and condylar growth. RME is a safe and effective solution that can substantially improve maxillary and mandibular symmetry in growing patients affected by JIA with TMJ involvement.

Description of a Digital Work-Flow for CBCT-Guided Construction of Micro-Implant Supported Maxillary Skeletal Expander

The introduction of miniscrew-assisted rapid palatal expansion (MARPE) has widened the boundaries of orthodontic skeletal correction of maxillary transversal deficiency to late adolescence and adult patients. In this respect, Maxillary Skeletal Expander (MSE) is a particular device characterized by the engagement of four miniscrews in the palatal and nasal cortical bone layers. Thus, the availability of sufficient supporting bone and the perforation of both cortical laminas (bi-corticalism) are two mandatory parameters for mini-screw stability, especially when orthopedic forces are used. Virtual planning and construction of MSE based on cone-beam computed tomography (CBCT)-derived stereolithography (.stl) files have been recently described in the literature. In this manuscript we described: (a) a user-friendly digital workflow which can provide a predictable placement of maxillary skeletal expander (MSE) appliance according to the patient's anatomical characteristics, (b) the construction of a positional template of the MSE that allows lab technician to construct the MSE appliance in a reliable and accurate position, according to the virtual project planned by the orthodontist on the patient CBCT scans. We also described a case report of an adult female patient affected by skeletal transversal maxillary deficiency treated with MSE appliance that was projected according to the described workflow.

A Comparative Assessment of Pain Caused by the Placement of Banded Orthodontic Appliances with and without Low-Level Laser Therapy: A Randomized Controlled Prospective Study

Patients still refuse or discontinue orthodontic treatment due to related pain and discomfort. In this study, we investigate if low-level laser therapy (LLLT) can reduce pain caused by orthodontic bands. Sixty subjects who needed bands placed on the upper permanent first molars were assigned randomly to the LLLT group, placebo, and control groups. Inclusion criteria were: age range 10–14 years, fully erupted upper first molars in healthy condition, presence of tight mesial proximal contact. Exclusion criteria were: systemic or metabolic diseases, chronic pain or neurological or psychiatric disorders, use of pharmacological agents interfering with pain perception, previous orthodontic treatment or the simultaneous presence of other devices in the patient’s mouth. The assessment of pain was performed by using a numeric rating scale (NRS) considering different time intervals, i.e., immediately after bands placement, 6 h, 24 h, and from day 2 to day 5. Differences in the maximum pain and in pain experienced at each time-point, among the three groups, was assessed by using the Kruskal–Wallis H. The final sample included 56 patients, 29 males, and 27 females, with a mean age of 12.03 ± 1.3 years. Patients were randomly allocated into three groups (tested, control, and placebo group) with each group consisting respectively of 19, 20, and 17 individuals. Subjects in the LLLT experienced less pain at each time interval as well as the maximum pain score being lower in the LLLT compared to control and placebo groups. These findings were all statistically significant (p < 0.05). LLLT can alleviate the intensity of pain after the placement of orthodontic bands.

Current Evidence of Natural Agents in Oral and Periodontal Health

Oral and periodontal diseases, chewing disorders, and many destructive inflammatory diseases of the supporting tissues of the teeth are usually caused by an imbalance between host defense and environmental factors like smoking, poor nutrition, and a high percentage of periodontopathogenic bacteria. For these reasons, it is important also to focus attention on plaque control and also on improving host resistance through smoking and stress reduction, and a healthy diet. During the last decades, the importance of micronutrients has been extensively reviewed, and it was concluded that the prevention and treatment of periodontitis should include correct daily nutrition and a correct balance between antioxidants, probiotics, natural agents, vitamin D, and calcium. Recently, there has been growing interest in the literature on the impact of nutraceutical dietary aliments on oral and general health. This Special Issue provides a current and thoughtful perspective on the relationship of diet and natural agents on oral and periodontal diseases through a correct clinical approach with the last and most important evidence that may determine good oral conditions and high quality of life.

Accuracy and Reliability of Space Analysis Measurements in Digital Models with Different Degrees of Crowding

Background:

With the introduction of digital systems in the orthodontic field, it is not still clear if such systems can accurately substitute analogical systems in the diagnosis and orthodontic treatment plane.

Objective:

The study compared the Arch Length Discrepancy (TALD) and Bolton ratio obtained from plaster dental casts (gold standard) and digital models and tested the null hypothesis that TALD and Bolton ratio measurements in digital models are affected by the degree of crowding.

Methods:

The sample included 40 dental models divided into five sub-groups, according to the American Board of Orthodontists (ABO) score of crowding. Plaster casts were scanned by a 3D laser scanner to obtain digital models. In digital and plaster models, the mesiodistal width of each tooth and arch lengths (maxillary and mandibular) were measured to calculate anterior and total Bolton ratios and TALD. Three operators performed measurements on plaster and digital models using a digital caliper and OrthoAnalyzerTM 3D software (3Shape A/S, Copenhagen, Denmark).

Results:

No statistically significant differences were obtained for intra and inter-examiner reliability (p > 0.05). When comparing plaster and digital findings, statistically significant differences were obtained for all measurements except for mandibular arch length and anterior Bolton ratio. In general, there was an overestimation of tooth size and arch length discrepancy in digital models. Moreover, the mean difference of measurements between both the methods increased in more crowded models.

Conclusions:

Crowding affects, the accuracy of Bolton ratio, and the arch length measurements. since the overestimation is relatively small, it should not be considered of clinical significance.

Maxillary Orthodontic Expansion Assisted by Unilateral Alveolar Corticotomy and Low-Level Laser Therapy: A Novel Approach for Correction of a Posterior Unilateral Cross-Bite in Adults

Introduction: The treatment of a true unilateral posterior crossbite often requires asymmetric maxillary expansion; however, this is challenging to achieve with conventional expansion methods because of several biomechanical limitations. In this paper, we introduce a new protocol for the treatment of a unilateral posterior crossbite in adults based on maxillary orthodontic expansion assisted by corticotomy and low-level laser therapy (LLLT) performed on the crossbite side. Methods: The study sample included 15 adults (8 females, 7 males) affected by a true unilateral posterior crossbite, with a mean age of 21.6 ± 3.1 years at the at the beginning of treatment. After the application of orthodontic appliances (palatal expander and self-ligating brackets), corticomy was performed at the buccal aspect of the crossbite side while LLLT was monthly administered up to the correction of the crossbite. The efficacy of the technique was evaluated through measurements performed on maxillary digital models. Results: All subjects reported successful correction of the posterior unilateral crossbite, and functional occlusion was achieved as well. The average expansion was greater at the crossbite side compared to the unaffected side and such difference was significant at the levels of first premolars (P < 0.05), second premolars (P < 0.05) and first molars (P < 0.05). Conclusion: Orthodontic maxillary expansion assisted by unilateral corticotomy and LLLT was effective in the treatment of the true unilateral crossbite.

Three-dimensional evaluation of forced unilateral posterior crossbite correction in the mixed dentition: a randomized controlled trial

Objectives

The objectives of this study were to assess the three-dimensional (3D) treatment changes (palatal surface area and volume) of forced unilateral posterior crossbite correction using either quad-helix or removable expansion plate appliances in the mixed dentition, and to compare the treatment changes with the three-dimensional changes occurring in age-matched untreated unilateral posterior crossbite patients as well as in subjects with normal occlusion and with no or mild orthodontic treatment need.

Trial design

Six-arm parallel group multicentre randomized controlled trial.

Materials and methods

One-hundred and thirty-five patients with unilateral posterior crossbite with functional shift were recruited. The patients were randomized by an independent person not involved in the trial. The randomization used blocks of 25, and the patients were randomized into the following five groups: quad-helix treatments in specialist orthodontic clinics (QHS), quad-helix treatments in general dentistry (QHG), removable expansion plate treatments in specialist orthodontic clinics (EPS), removable expansion plate treatments in general dentistry (EPG), and untreated crossbite (UC). Twenty-five patients with normal occlusion who served as normal controls were also included in the trial. Blinding of the outcome assessor and data analyst was accomplished. Data on all children were evaluated on an intention-to-treat basis, regarding 3D palatal surface area, palatal projection area, and palatal shell volume; two-dimensional linear measurements were registered at the same time.

Results

After treatment, the surface and projection area and shell volume increased in the four treatment groups (QHS, QHG, EPS, and EPG). QHS increased significantly more than EPG for the surface and projection area. The QHS and EPS had significantly higher mean difference for shell volume.

Limitations

The trial considers a short-term evaluation.

Conclusion

After treatment, there were no significant differences between the four treatment groups and the normal group, which implies that the surface and projection area together with the shell volume for the four treatment groups and the normal group were equivalent.

Trial registration

The trial was registered with https://www.researchweb.org/is/sverige, registration number: 220751.

Palatal morphology in unilateral cleft lip and palate patients: Association with infant cleft dimensions and timing of hard palate repair

OBJECTIVES

To assess the impact of cleft severity and timing of hard palate repair on palatal dimensions in unilateral cleft lip and palate (UCLP) children.

SETTING AND SAMPLE POPULATION

Single-centre analysis within a multicenter RCT of primary surgery; 122 UCLP randomized to early hard palate closure (EHPC) at 12 months or delayed hard palate closure (DHPC) at 36 months; 28 frequency-matched controls.

METHODS

Linear measurements of palatal height, width and length were performed on 116 digital models of UCLP subjects (8.21 years, SD = 0.53) and 28 models of non-cleft individuals (8.44 years SD = 0.72). Cleft dimensions at infancy (mean 1.8 months) were considered. In a pilot study, shell-to-shell distances between the 3D cleft palate objects and a reference mesh were calculated and differences between the groups assessed. Morphological differences were visualized using colour mapping.

RESULTS

Compared to controls, UCLP subjects presented a higher palate at the level of the anterior scar (P = 0.002), but generally a lower palate in the middle region (P < 0.001). Comparing UCLP subgroups, the DHPC subjects showed a flatter palate posteriorly (P = 0.048) and the EHPC group exhibited more transversal constriction (P = 0.003 at M1 level). 3D analysis revealed a shallower palate in the DHPC group both in the middle (P = 0.002) and the posterior part (P = 0.008). Anterior cleft severity correlated negatively with palatal height (P = 0.01).

CONCLUSIONS

Unilateral cleft lip and palate palates differ from controls in width and height. DHPC may represent an advantage for the transversal dimension, but a disadvantage for palatal height. Infant cleft dimensions partially explain differences in palatal height.