The role of branchpoint-3' splice site spacing and interaction between intron terminal nucleotides in 3' splice site selection in Saccharomyces cerevisiae

Promoters and introns as key drivers for enhanced gene expression in Saccharomyces cerevisiae

The transcription of genes in the yeast Saccharomyces cerevisiae is governed by multiple layers of regulatory elements and proteins, cooperating to ensure optimum expression of the final protein product based on the cellular requirements. Promoters have always been regarded as the most important determinant of gene transcription, but introns also play a key role in the expression of intron-encoding genes. Some introns can enhance transcription when introduced either promoter-proximal or embedded in the open reading frame of genes. However, the outcome is seldom predictable, with some introns increasing or decreasing transcription depending on the promoter and reporter gene employed. This chapter provides an overview of the general structure and function of promoters and introns and how they may cooperate during transcription to allow intron-mediated enhancement of gene expression. Since S. cerevisiae is a suitable host for recombinant protein production on a commercial level, stronger and more controllable promoters are in high demand. Enhanced gene expression can be achieved via promoter engineering, which may include introns that increase the efficacy of recombinant expression cassettes. Different models for the role of introns in transcription are briefly discussed to show how these intervening sequences can actively interact with the transcription machinery. Furthermore, recent examples of improved protein production via the introduction of promoter-proximal introns are highlighted to showcase the potential value of intron-mediated enhancement of gene expression.

Splicing of branchpoint-distant exons is promoted by Cactin, Tls1 and the ubiquitin-fold-activated Sde2

Intron diversity facilitates regulated gene expression and alternative splicing. Spliceosomes excise introns after recognizing their splicing signals: the 5'-splice site (5'ss), branchpoint (BP) and 3'-splice site (3'ss). The latter two signals are recognized by U2 small nuclear ribonucleoprotein (snRNP) and its accessory factors (U2AFs), but longer spacings between them result in weaker splicing. Here, we show that excision of introns with a BP-distant 3'ss (e.g. rap1 intron 2) requires the ubiquitin-fold-activated splicing regulator Sde2 in Schizosaccharomyces pombe. By monitoring splicing-specific ura4 reporters in a collection of S. pombe mutants, Cay1 and Tls1 were identified as additional regulators of this process. The role of Sde2, Cay1 and Tls1 was further confirmed by increasing BP-3'ss spacings in a canonical tho5 intron. We also examined BP-distant exons spliced independently of these factors and observed that RNA secondary structures possibly bridged the gap between the two signals. These proteins may guide the 3'ss towards the spliceosome's catalytic centre by folding the RNA between the BP and 3'ss. Orthologues of Sde2, Cay1 and Tls1, although missing in the intron-poor Saccharomyces cerevisiae, are present in intron-rich eukaryotes, including humans. This type of intron-specific pre-mRNA splicing appears to have evolved for regulated gene expression and alternative splicing of key heterochromatin factors.

A broad analysis of splicing regulation in yeast using a large library of synthetic introns

RNA splicing is a key process in eukaryotic gene expression, in which an intron is spliced out of a pre-mRNA molecule to eventually produce a mature mRNA. Most intron-containing genes are constitutively spliced, hence efficient splicing of an intron is crucial for efficient regulation of gene expression. Here we use a large synthetic oligo library of ~20,000 variants to explore how different intronic sequence features affect splicing efficiency and mRNA expression levels in S. cerevisiae. Introns are defined by three functional sites, the 5’ donor site, the branch site, and the 3’ acceptor site. Using a combinatorial design of synthetic introns, we demonstrate how non-consensus splice site sequences in each of these sites affect splicing efficiency. We then show that S. cerevisiae splicing machinery tends to select alternative 3’ splice sites downstream of the original site, and we suggest that this tendency created a selective pressure, leading to the avoidance of cryptic splice site motifs near introns’ 3’ ends. We further use natural intronic sequences from other yeast species, whose splicing machineries have diverged to various extents, to show how intron architectures in the various species have been adapted to the organism’s splicing machinery. We suggest that the observed tendency for cryptic splicing is a result of a loss of a specific splicing factor, U2AF1. Lastly, we show that synthetic sequences containing two introns give rise to alternative RNA isoforms in S. cerevisiae, demonstrating that merely a synthetic fusion of two introns might be suffice to facilitate alternative splicing in yeast. Our study reveals novel mechanisms by which introns are shaped in evolution to allow cells to regulate their transcriptome. In addition, it provides a valuable resource to study the regulation of constitutive and alternative splicing in a model organism.

RNA splicing is a process in which parts of a new pre-mRNA are spliced out of the mRNA molecule to produce eventually a mature mRNA. Those RNA segments that are spliced out are termed introns, and they are found in most genes in eukaryotic organisms. Hence regulation of this process has a major role in the control of gene expression.

The budding yeast S. cerevisiae is a popular model organism for eukaryotic cell biology, but in terms of splicing it differs, as it has only few intron-containing genes. Nevertheless, this species has been used to study basic principles of splicing regulation based on its ~300 introns. Here we used the technology of a large synthetic genetic library to introduce many new intron-containing genes to the yeast genome, to explore splicing regulation at a wider scope than was possible so far.

Reassuringly, our results confirm known regulatory mechanisms, and further expand our understanding of splicing regulation, specifically how the yeast splicing machinery interacts with the end of introns, and how through evolution introns have evolved to avoid unwanted misidentifications of this end. We further demonstrate the potential of the yeast splicing machinery to alternatively splice a two-intron gene, which is common in other eukaryotes but rare in yeast. Our work presents a first-of-its-kind resource for the systematic study of splicing in live cells.

Spliceosome Profiling Visualizes Operations of a Dynamic RNP at Nucleotide Resolution

Tools to understand how the spliceosome functions in vivo have lagged behind advances in the structural biology of the spliceosome. Here, methods are described to globally profile spliceosome-bound pre-mRNA, intermediates, and spliced mRNA at nucleotide resolution. These tools are applied to three yeast species that span 600 million years of evolution. The sensitivity of the approach enables the detection of canonical and non-canonical events, including interrupted, recursive, and nested splicing. This application of statistical modeling uncovers independent roles for the size and position of the intron and the number of introns per transcript in substrate progression through the two catalytic stages. These include species-specific inputs suggestive of spliceosome-transcriptome coevolution. Further investigations reveal the ATP-dependent discard of numerous endogenous substrates after spliceosome assembly in vivo and connect this discard to intron retention, a form of splicing regulation. Spliceosome profiling is a quantitative, generalizable global technology used to investigate an RNP central to eukaryotic gene expression.

Structures of the human spliceosomes before and after release of the ligated exon

Pre-mRNA splicing is executed by the spliceosome, which has eight major functional states each with distinct composition. Five of these eight human spliceosomal complexes, all preceding exon ligation, have been structurally characterized. In this study, we report the cryo-electron microscopy structures of the human post-catalytic spliceosome (P complex) and intron lariat spliceosome (ILS) at average resolutions of 3.0 and 2.9 Å, respectively. In the P complex, the ligated exon remains anchored to loop I of U5 small nuclear RNA, and the 3′-splice site is recognized by the junction between the 5′-splice site and the branch point sequence. The ATPase/helicase Prp22, along with the ligated exon and eight other proteins, are dissociated in the P-to-ILS transition. Intriguingly, the ILS complex exists in two distinct conformations, one with the ATPase/helicase Prp43 and one without. Comparison of these three late-stage human spliceosomes reveals mechanistic insights into exon release and spliceosome disassembly.

Structural studies of the spliceosome: past, present and future perspectives

The spliceosome is a multi-subunit RNA-protein complex involved in the removal of non-coding segments (introns) from between the coding regions (exons) in precursors of messenger RNAs (pre-mRNAs). Intron removal proceeds via two transesterification reactions, occurring between conserved sequences at intron-exon junctions. A tightly regulated, hierarchical assembly with a multitude of structural and compositional rearrangements posed a great challenge for structural studies of the spliceosome. Over the years, X-ray crystallography dominated the field, providing valuable high-resolution structural information that was mostly limited to individual proteins and smaller sub-complexes. Recent developments in the field of cryo-electron microscopy allowed the visualisation of fully assembled yeast and human spliceosomes, providing unprecedented insights into substrate recognition, catalysis, and active site formation. This has advanced our mechanistic understanding of pre-mRNA splicing enormously.

Postcatalytic spliceosome structure reveals mechanism of 3'-splice site selection

Introns are removed from eukaryotic messenger RNA precursors by the spliceosome in two transesterification reactions-branching and exon ligation. The mechanism of 3'-splice site recognition during exon ligation has remained unclear. Here we present the 3.7-angstrom cryo-electron microscopy structure of the yeast P-complex spliceosome immediately after exon ligation. The 3'-splice site AG dinucleotide is recognized through non-Watson-Crick pairing with the 5' splice site and the branch-point adenosine. After the branching reaction, protein factors work together to remodel the spliceosome and stabilize a conformation competent for 3'-splice site docking, thereby promoting exon ligation. The structure accounts for the strict conservation of the GU and AG dinucleotides at the 5' and 3' ends of introns and provides insight into the catalytic mechanism of exon ligation.

A birth of bipartite exon by intragenic deletion

BACKGROUND

Disease-causing mutations that activate transposon-derived exons without creating a new splice-site consensus have been reported rarely, but they provided unique insights into our understanding of structural motifs required for inclusion of intronic sequences in mature transcripts.

METHODS

We employ a combination of experimental and computational techniques to characterize the first de novo bipartite exon activation in genetic disease.

RESULTS

The exon originated from two separate introns as a result of an in-frame COL4A5 deletion associated with a typical Alport syndrome. The deletion encompassed exons 38 through 41 and activated a cryptic 3' and 5' splice site that were derived from intron 37 and intron 41, respectively. The deletion breakpoint was in the middle of the new exon, with considerable complementarity between the two exonic parts, potentially bringing the cryptic 3' and 5' splice site into proximity. The 3' splice site, polypyrimidine tract and the branch site of the new exon were derived from an inactive, 5' truncated LINE-1 retrotransposon. This ancient LINE-1 copy sustained a series of mutations that created the highly conserved AG dinucleotide at the 3' splice site early in primate development. The exon was fully included in mature transcripts and introduced a stop codon in the shortened COL4A5 mRNA, illustrating pitfalls of inferring disease severity from DNA mutation alone.

CONCLUSION

These results expand the repertoire of mutational mechanisms that alter RNA processing in genetic disease and illustrate the extraordinary versatility of transposed elements in shaping the new exon-intron structure and the phenotypic variability.

Structure of a spliceosome remodelled for exon ligation

The spliceosome excises introns from pre-mRNAs in two sequential transesterifications – branching and exon ligation¹ – catalysed at a single catalytic metal site in U6 snRNA^2,3. The recent structures of the spliceosomal C complex^4,5 with the cleaved 5’-exon and lariat—3’-exon bound to the catalytic centre revealed that branching-specific factors such as Cwc25 lock the branch helix into position for nucleophilic attack of the branch adenosine at the 5’-splice site. Furthermore, the ATPase Prp16 is positioned to bind and translocate the intron downstream of the branch point to destabilize branching-specific factors and release the branch helix from the active site⁴. Here we present the 3.8Å cryo-EM structure of a Saccharomyces cerevisiae spliceosome stalled after Prp16-mediated remodelling but prior to exon ligation. While the U6 snRNA catalytic core remains firmly held in the active site cavity of Prp8 by proteins common to both steps, the branch helix has rotated by 75 degrees compared to complex C and is stabilized into a new position by Prp17, Cef1, and the reoriented Prp8 RNaseH domain. This rotation of the branch helix removes the branch adenosine from the catalytic core, creates a space for 3’-exon docking, and restructures the pairing of the 5’-splice site with the U6 snRNA ACAGAGA region. Slu7 and Prp18, which promote exon ligation, bind together to the Prp8 RNaseH domain. The ATPase Prp22, bound to Prp8 in place of Prp16, could interact with the 3’-exon, suggesting a possible basis for mRNA release after exon ligation^6,7. Together with the C complex structure⁴, our new C* complex structure reveals the two major conformations of the spliceosome during the catalytic stages of splicing.

Spliceosome-mediated decay (SMD) regulates expression of nonintronic genes in budding yeast

We uncovered a novel role for the spliceosome in regulating mRNA expression levels that involves splicing coupled to RNA decay, which we refer to as spliceosome-mediated decay (SMD). Our transcriptome-wide studies identified numerous transcripts that are not known to have introns but are spliced by the spliceosome at canonical splice sites in Saccharomyces cerevisiae. Products of SMD are primarily degraded by the nuclear RNA surveillance machinery. We demonstrate that SMD can significantly down-regulate mRNA levels; splicing at canonical splice sites in the bromodomain factor 2 (BDF2) transcript reduced transcript levels roughly threefold by generating unstable products that are rapidly degraded by the nuclear surveillance machinery. Regulation of BDF2 mRNA levels by SMD requires Bdf1, a functionally redundant Bdf2 paralog that plays a role in recruiting the spliceosome to the BDF2 mRNA. Interestingly, mutating BDF2 5' splice site and branch point consensus sequences partially suppresses the bdf1Δ temperature-sensitive phenotype, suggesting that maintaining proper levels of Bdf2 via SMD is biologically important. We propose that the spliceosome can also repress protein-coding gene expression by promoting nuclear turnover of spliced RNA products and provide an insight for coordinated regulation of Bdf1 and Bdf2 levels in the cell.

Rapid screening of yeast mutants with reporters identifies new splicing phenotypes

Nuclear precursor mRNA splicing requires the stepwise assembly of a large complex, the spliceosome. Recent large-scale analyses, including purification of splicing complexes, high-throughput genetic screens and interactomic studies, have linked numerous factors to this dynamic process, including a well-defined core conserved from yeast to human. Intriguingly, despite extensive studies, no splicing defects were reported for some of the corresponding yeast mutants. To resolve this paradox, we screened a collection of viable yeast strains carrying mutations in splicing-related factors with a set of reporters including artificial constructs carrying competing splice sites. Previous analyses have indeed demonstrated that this strategy identifies yeast factors able to regulate alternative splicing and whose properties are conserved in human cells. The method, sensitive to subtle defects, revealed new splicing phenotypes for most analyzed factors such as the Urn1 protein. Interestingly, a mutant of PRP8 specifically lacking an N-terminal proline-rich region stimulated the splicing of a reporter containing competing branchpoint/3' splice site regions. Thus, using appropriate reporters, yeast can be used to quickly delineate the effect of various factors on splicing and identify those with the propensity to regulate alternative splicing events.

Intronic sequence elements impede exon ligation and trigger a discard pathway that yields functional telomerase RNA in fission yeast

The fission yeast telomerase RNA (TER1) precursor harbors an intron immediately downstream from its mature 3' end. Unlike most introns, which are removed from precursor RNAs by the spliceosome in two sequential but tightly coupled transesterification reactions, TER1 only undergoes the first cleavage reaction during telomerase RNA maturation. The mechanism underlying spliceosome-mediated 3' end processing has remained unclear. We now demonstrate that a strong branch site (BS), a long distance to the 3' splice site (3' SS), and a weak polypyrimidine (Py) tract act synergistically to attenuate the transition from the first to the second step of splicing. The observation that a strong BS antagonizes the second step of splicing in the context of TER1 suggests that the BS-U2 snRNA interaction is disrupted after the first step and thus much earlier than previously thought. The slow transition from first to second step triggers the Prp22 DExD/H-box helicase-dependent rejection of the cleaved products and Prp43-dependent "discard" of the splicing intermediates. Our findings explain how the spliceosome can function in 3' end processing and provide new insights into the mechanism of splicing.

Molecular mechanisms of a novel β-thalassaemia mutation due to the duplication of tetranucleotide 'AGCT' at the junction IVS-II/exon 3

We report a new β-thalassaemia allele detected in a young Italian woman, suffering with mild non-haemolytic anaemia (Hb < 10 g/dL) and not showing Hb variant or Heinz bodies. The allele is characterised by duplication of tetranucleotide 'AG/CT' (+1344/+1347) including the invariant dinucleotide 'AG' of IVS-II acceptor splicing site and the first two nucleotides of codon 105. β-Globin complementary DNA (cDNA) sequencing did not reveal any mutation and qualitative analysis of the reverse transcription PCR reaction showed that only the proximal 3' splice site present in the duplicated gene is used giving race to an anomalous messenger RNA (mRNA) present in trace (1.5 %) because, most probably, rapidly degraded. In the anomalous mRNA, the insertion causes a frameshift and synthesis of an abnormal truncated β-chain (139 residues), unable to form Hb variant because of the severe conformational changes. The duplication might have arisen from secondary structures generated by quasi-palindromic sequence 5'-CCCA(C)AG/CT(CC)TGGG-3'. Restriction fragment length polymorphism analysis for the β-globin haplotype and familiar segregation analysis indicated that the mutant β-globin gene was associated with the haplotype V.

Intronic features that determine the selection of the 3' splice site

Most eukaryotic primary transcripts include segments, or introns, that will be accurately removed during RNA biogenesis. This process, known as pre-messenger RNA splicing, is catalyzed by the spliceosome, accurately selecting a set of intronic marks from others apparently equivalent. This identification is critical, as incorrectly spliced RNAs can be toxic for the organism. One of these marks, the dinucleotide AG, signals the intronic 3' end, or 3' splice site (ss). In this review we will focus on those intronic features that have an impact on 3' ss selection. These include the location and type of neighboring sequences, and their distance to the 3' end. We will see that their interplay is needed to select the right intronic end, and that this can be modulated by additional intronic elements that contribute to alternative splicing, whereby diverse RNAs can be generated from identical precursors. This complexity, still poorly understood, is fundamental for the accuracy of gene expression. In addition, a clear knowledge of 3' ss selection is needed to fully decipher the coding potential of genomes.

RNA secondary structure mediates alternative 3'ss selection in Saccharomyces cerevisiae

Alternative splicing is the mechanism by which different combinations of exons in the pre-mRNA give rise to distinct mature mRNAs. This process is mediated by splicing factors that bind the pre-mRNA and affect the recognition of its splicing signals. Saccharomyces species lack many of the regulatory factors present in metazoans. Accordingly, it is generally assumed that the amount of alternative splicing is limited. However, there is recent compelling evidence that yeast have functional alternative splicing, mainly in response to environmental conditions. We have previously shown that sequence and structure properties of the pre-mRNA could explain the selection of 3' splice sites (ss) in Saccharomyces cerevisiae. In this work, we extend our previous observations to build a computational classifier that explains most of the annotated 3'ss in the CDS and 5' UTR of this organism. Moreover, we show that the same rules can explain the selection of alternative 3'ss. Experimental validation of a number of predicted alternative 3'ss shows that their usage is low compared to annotated 3'ss. The majority of these alternative 3'ss introduce premature termination codons (PTCs), suggesting a role in expression regulation. Furthermore, a genome-wide analysis of the effect of temperature, followed by experimental validation, yields only a small number of changes, indicating that this type of regulation is not widespread. Our results are consistent with the presence of alternative 3'ss selection in yeast mediated by the pre-mRNA structure, which can be responsive to external cues, like temperature, and is possibly related to the control of gene expression.

Cotranscriptional spliceosome assembly and splicing are independent of the Prp40p WW domain

Complex cellular functions involve large networks of interactions. Pre-mRNA splicing and transcription are thought to be coupled by the C-terminal domain (CTD) of the large subunit of RNA polymerase II (Pol II). In yeast, the U1 snRNP subunit Prp40 was proposed to mediate cotranscriptional recruitment of early splicing factors through binding of its WW domains to the Pol II CTD. Here we investigate the role of Prp40 in splicing with an emphasis on the role of the WW domains, which might confer protein-protein interactions among the splicing and transcriptional machineries. Affinity purification revealed that Prp40 and Snu71 form a stable heterodimer that stably associates with the U1 snRNP only in the presence of Nam8, a known regulator of 5' splice site recognition. However, the Prp40 WW domains were dispensable for yeast viability. In their absence, no defect in splicing in vivo, U1 or U2 snRNP recruitment in vivo, or early splicing complex assembly in vitro was detected. We conclude that the WW domains of Prp40 do not mediate essential coupling between U1 snRNP and Pol II. Instead, delays in cotranscriptional U5 snRNP and Prp19 recruitment and altered spliceosome formation in vitro suggest that Prp40 WW domains assist in late steps of spliceosome assembly.

Factors affecting splicing strength of yeast genes

Accurate and efficient splicing is of crucial importance for highly-transcribed intron-containing genes (ICGs) in rapidly replicating unicellular eukaryotes such as the budding yeast Saccharomyces cerevisiae. We characterize the 5' and 3' splice sites (ss) by position weight matrix scores (PWMSs), which is the highest for the consensus sequence and the lowest for splice sites differing most from the consensus sequence and used PWMS as a proxy for splicing strength. HAC1, which is known to be spliced by a nonspliceosomal mechanism, has the most negative PWMS for both its 5' ss and 3' ss. Several genes under strong splicing regulation and requiring additional splicing factors for their splicing also have small or negative PWMS values. Splicing strength is higher for highly transcribed ICGs than for lowly transcribed ICGs and higher for transcripts that bind strongly to spliceosomes than those that bind weakly. The 3' splice site features a prominent poly-U tract before the 3'AG. Our results suggest the potential of using PWMS as a screening tool for ICGs that are either spliced by a nonspliceosome mechanism or under strong splicing regulation in yeast and other fungal species.

Deciphering 3'ss selection in the yeast genome reveals an RNA thermosensor that mediates alternative splicing

Poor understanding of the spliceosomal mechanisms to select intronic 3' ends (3'ss) is a major obstacle to deciphering eukaryotic genomes. Here, we discern the rules for global 3'ss selection in yeast. We show that, in contrast to the uniformity of yeast splicing, the spliceosome uses all available 3'ss within a distance window from the intronic branch site (BS), and that in ∼70% of all possible 3'ss this is likely to be mediated by pre-mRNA structures. Our results reveal that one of these RNA folds acts as an RNA thermosensor, modulating alternative splicing in response to heat shock by controlling alternate 3'ss availability. Thus, our data point to a deeper role for the pre-mRNA in the control of its own fate, and to a simple mechanism for some alternative splicing.

A novel spliceosome-mediated trans-splicing can change our view on genome complexity of the divergent eukaryote Giardia intestinalis

Although spliceosomal introns are an abundant landmark in eukaryotic genomes, the nuclear genome of the divergent eukaryote Giardia intestinalis, the causative agent of giardiasis, has been considered as "intron-poor" with only five canonical (cis-spliced) introns. However, three research groups (including ours) have independently reported a novel class of spliceosomal introns in the G. intestinalis genome. Three protein-coding genes are split into pieces in the G. intestinalis genome, and each of the partial coding regions was independently transcribed into polyadenylated premature mRNAs (pre-mRNAs). The two pre-mRNAs directly interact with each other by an intermolecular-stem structure formed between their non-coding portions, and are then processed into mature mRNAs by spliceosome-mediated trans-splicing. Here, we summarize the recently published works on split introns ("splintrons") in the G. intestinalis genome, and then provide our speculation on the functional property of the Giardia spliceosomes based on the putative ratio of splintrons to canonical introns. Finally, we discuss a scenario for the transition from typical GT-AG boundaries to non-typical AT-AC boundaries in a particular splintron of Giardia.

The mechanism of the second step of pre-mRNA splicing

The molecular mechanisms of the second step of pre-mRNA splicing in yeast and higher eukaryotes are reviewed. The important elements in the pre-mRNA, the participating proteins, and the proposed secondary structures and roles of the snRNAs are described. The sequence of events in the second step is presented, focusing on the actions of the proteins in setting up and facilitating the second reaction. Mechanisms for avoiding errors in splicing are discussed.

Secondary structure is required for 3' splice site recognition in yeast

Higher order RNA structures can mask splicing signals, loop out exons, or constitute riboswitches all of which contributes to the complexity of splicing regulation. We identified a G to A substitution between branch point (BP) and 3′ splice site (3′ss) of Saccharomyces cerevisiae COF1 intron, which dramatically impaired its splicing. RNA structure prediction and in-line probing showed that this mutation disrupted a stem in the BP-3′ss region. Analyses of various COF1 intron modifications revealed that the secondary structure brought about the reduction of BP to 3′ss distance and masked potential 3′ss. We demonstrated the same structural requisite for the splicing of UBC13 intron. Moreover, RNAfold predicted stable structures for almost all distant BP introns in S. cerevisiae and for selected examples in several other Saccharomycotina species. The employment of intramolecular structure to localize 3′ss for the second splicing step suggests the existence of pre-mRNA structure-based mechanism of 3′ss recognition.

Allele-specific recognition of the 3' splice site of INS intron 1

Genetic predisposition to type 1 diabetes (T1D) has been associated with a chromosome 11 locus centered on the proinsulin gene (INS) and with differential steady-state levels of INS RNA from T1D-predisposing and -protective haplotypes. Here, we show that the haplotype-specific expression is determined by INS variants that control the splicing efficiency of intron 1. The adenine allele at IVS1-6 (rs689), which rapidly expanded in modern humans, renders the 3' splice site of this intron more dependent on the auxiliary factor of U2 small nuclear ribonucleoprotein (U2AF). This interaction required both zinc fingers of the 35-kD U2AF subunit (U2AF35) and was associated with repression of a competing 3' splice site in INS exon 2. Systematic mutagenesis of reporter constructs showed that intron 1 removal was facilitated by conserved guanosine-rich enhancers and identified additional splicing regulatory motifs in exon 2. Sequencing of intron 1 in primates revealed that relaxation of its 3' splice site in Hominidae coevolved with the introduction of a short upstream open reading frame, providing a more efficient coupled splicing and translation control. Depletion of SR proteins 9G8 and transformer-2 by RNA interference was associated with exon 2 skipping whereas depletion of SRp20 with increased representation of transcripts containing a cryptic 3' splice site in the last exon. Together, these findings reveal critical interactions underlying the allele-dependent INS expression and INS-mediated risk of T1D and suggest that the increased requirement for U2AF35 in higher primates may hinder thymic presentation of autoantigens encoded by transcripts with weak 3' splice sites.

Exon sequences at the splice junctions affect splicing fidelity and alternative splicing

Identification of splice sites is essential for the expression of most eukaryotic genes, allowing accurate splicing of pre-mRNAs. The splice sites are recognized by the splicing machinery based on sequences within the pre-mRNA. Here, we show that the exon sequences at the splice junctions play a significant, previously unrecognized role in the selection of 3' splice sites during the second step of splicing. The influence of the exon sequences was enhanced by the Prp18 mutant Prp18DeltaCR, and the strength of an exon sequence in Prp18DeltaCR splicing predicted its effect in wild-type splicing. Analysis of the kinetics of splicing in vitro demonstrated that 3' splice sites were chosen competitively during the second step, likely at the same time as exon ligation. In wild-type yeast, splice site selection for two genes studied was altered by point mutations in their exon bases, affecting splicing fidelity and alternative splicing. Finally, we note that the degeneracy of the genetic code allows competing 3' splice sites to be eliminated from coding regions, and we suggest that the evolution of the splicing signals and the genetic code are connected.

Splice site requirements and switches in plants

Intron sequences in nuclear pre-mRNAs are excised with either the major U2 snRNA-dependent spliceosomal pathway or the minor U12 snRNA-dependent spliceosomal pathway that exist in most eukaryotic organisms. While the predominant dinucleotides bordering each of these types of introns and the catalytic mechanism used in their excision are conserved in plants and animals, several features aiding in the recognition of plant introns are distinct from those in animals and yeast. Along with their short length, high AU content and high variation in their 5' and 3' splice sites and branchpoint consensus sequences are the most prominent characteristics of plant introns. Detailed surveys of site-directed mutant introns tested in vivo and chemically induced and naturally mutant introns analyzed in planta emphasize the effects of changing individual nucleotides in these splice site consensus sequences and highlight a number of noncanonical dinucleotides that are functional in plant systems.

Sequestering of the 3' splice site in a theophylline-responsive riboswitch allows ligand-dependent control of alternative splicing

Despite the important role of alternative splicing in various aspects of biological processes, our ability to regulate this process at will remains a challenge. In this report, we asked whether a theophylline-responsive riboswitch could be adapted to manipulate alternative splicing. We constructed a pre-mRNA containing a single upstream 5' splice site and two 3' splice sites, of which the proximal 3' splice site is embedded in theophylline-responsive riboswitch. We show that this pre-mRNA spliced with preferential utilization of proximal 3' splice site in vitro. However, addition of theophylline to the splicing reaction promoted splicing at distal 3' splice site thereby changing the ratio of distal-to-proximal 3' splice site usage by more than twofold. Our data suggest that theophylline influenced 3' splice site choice without affecting the kinetics of the splicing reaction. We conclude that an in vitro selected riboswitch can be adapted to control alternative splicing, which may find many applications in basic, biotechnological, and biomedical research.

Spliceosome assembly and composition

Cells control alternative splicing by modulating assembly of the pre-mRNA splicing machinery at competing splice sites. Therefore, a working knowledge of spliceosome assembly is essential for understanding how alternative splice site choices are achieved. In this chapter, we review spliceosome assembly with particular emphasis on the known steps and factors subject to regulation during alternative splice site selection in mammalian cells. We also review recent advances regarding similarities and differences between the in vivo and in vitro assembly pathways, as well as proofreading mechanisms contributing to the fidelity of splice site selection.

Oriented scanning is the leading mechanism underlying 5' splice site selection in mammals

Splice site selection is a key element of pre-mRNA splicing. Although it is known to involve specific recognition of short consensus sequences by the splicing machinery, the mechanisms by which 5′ splice sites are accurately identified remain controversial and incompletely resolved. The human F7 gene contains in its seventh intron (IVS7) a 37-bp VNTR minisatellite whose first element spans the exon7–IVS7 boundary. As a consequence, the IVS7 authentic donor splice site is followed by several cryptic splice sites identical in sequence, referred to as 5′ pseudo-sites, which normally remain silent. This region, therefore, provides a remarkable model to decipher the mechanism underlying 5′ splice site selection in mammals. We previously suggested a model for splice site selection that, in the presence of consecutive splice consensus sequences, would stimulate exclusively the selection of the most upstream 5′ splice site, rather than repressing the 3′ following pseudo-sites. In the present study, we provide experimental support to this hypothesis by using a mutational approach involving a panel of 50 mutant and wild-type F7 constructs expressed in various cell types. We demonstrate that the F7 IVS7 5′ pseudo-sites are functional, but do not compete with the authentic donor splice site. Moreover, we show that the selection of the 5′ splice site follows a scanning-type mechanism, precluding competition with other functional 5′ pseudo-sites available on immediate sequence context downstream of the activated one. In addition, 5′ pseudo-sites with an increased complementarity to U1snRNA up to 91% do not compete with the identified scanning mechanism. Altogether, these findings, which unveil a cell type–independent 5′−3′-oriented scanning process for accurate recognition of the authentic 5′ splice site, reconciliate apparently contradictory observations by establishing a hierarchy of competitiveness among the determinants involved in 5′ splice site selection.

Typically, mammalian genes contain coding sequences (exons) separated by non-coding sequences (introns). Introns are removed during pre-mRNA splicing. The accurate recognition of introns during splicing is essential, as any abnormality in that process will generate abnormal mRNAs that can cause diseases. Understanding the mechanisms of accurate splice site selection is of prime interest to life scientists. Exon–intron borders (splice sites) are defined by short sequences that are poorly conserved. The strength of any splice sequence can be assessed by its degree of homology with a splice site consensus sequence. Within exons and introns, several sequences can match with this consensus as well as or better than the splice sites. Using a system in which a splice site sequence is repeated several times in the intron, the authors showed that linear 5′−3′ search is a leading mechanism underlying splice site selection. This scanning mechanism is cell type–independent, and only the most upstream splice site of all the series is selected, even if splice sites with a better match to the consensus are in the vicinity. These findings reconciliate contradictory observations and establish a hierarchy among the determinants involved in splice site selection.

Exon ligation is proofread by the DExD/H-box ATPase Prp22p

To produce messenger RNA, the spliceosome excises introns from precursor (pre)-mRNA and splices the flanking exons. To establish fidelity, the spliceosome discriminates against aberrant introns, but current understanding of such fidelity mechanisms is limited. Here we show that an ATP-dependent activity represses formation of mRNA from aberrant intermediates having mutations in any of the intronic consensus sequences. This proofreading activity is disabled by mutations that impair the ATPase or RNA unwindase activity of Prp22p, a conserved spliceosomal DExD/H-box ATPase. Further, cold-sensitive prp22 mutants permit aberrant mRNA formation from a mutated 3' splice-site intermediate in vivo. We conclude that Prp22p generally represses splicing of aberrant intermediates, in addition to its known ATP-dependent role in promoting release of genuine mRNA. This dual function for Prp22p validates a general model in which fidelity can be enhanced by a DExD/H-box ATPase.

Repositioning of the Reaction Intermediate within the Catalytic Center of the Spliceosome

Conformational change within the spliceosome is required between the first catalytic step of pre-mRNA splicing, when the branch site attacks the 5' splice site (SS), and the second step, when the 5' exon attacks the 3'SS. Little is known, however, about repositioning of the reaction substrates during this transition. Whereas the 5'SS is positioned for the first step by pairing with the invariant U6 snRNA-ACAGAG site, we demonstrate that this pairing interaction must be disrupted to allow transition to the second step. We propose that removal of the branch structure from the catalytic center is in competition with binding of the 3'SS substrate for the second step. Changes in the relative occupancy of first and second step substrates at the catalytic center alter efficiency of the two steps of splicing, allowing use of suboptimal intron sequences and thereby altering substrate selectivity.

Biased exon/intron distribution of cryptic and de novo 3' splice sites

We compiled sequences of previously published aberrant 3′ splice sites (3′ss) that were generated by mutations in human disease genes. Cryptic 3′ss, defined here as those resulting from a mutation of the 3′YAG consensus, were more frequent in exons than in introns. They clustered in ∼20 nt region adjacent to authentic 3′ss, suggesting that their under-representation in introns is due to a depletion of AG dinucleotides in the polypyrimidine tract (PPT). In contrast, most aberrant 3′ss that were induced by mutations outside the 3′YAG consensus (designated ‘de novo’) were in introns. The activation of intronic de novo 3′ss was largely due to AG-creating mutations in the PPT. In contrast, exonic de novo 3′ss were more often induced by mutations improving the PPT, branchpoint sequence (BPS) or distant auxiliary signals, rather than by direct AG creation. The Shapiro–Senapathy matrix scores had a good prognostic value for cryptic, but not de novo 3′ss. Finally, AG-creating mutations in the PPT that produced aberrant 3′ss upstream of the predicted BPS in vivo shared a similar ‘BPS-new AG’ distance. Reduction of this distance and/or the strength of the new AG PPT in splicing reporter pre-mRNAs improved utilization of authentic 3′ss, suggesting that AG-creating mutations that are located closer to the BPS and are preceded by weaker PPT may result in less severe splicing defects.

A mutational analysis of U12-dependent splice site dinucleotides

Introns spliced by the U12-dependent minor spliceosome are divided into two classes based on their splice site dinucleotides. The /AU-AC/ class accounts for about one-third of U12-dependent introns in humans, while the /GU-AG/ class accounts for the other two-thirds. We have investigated the in vivo and in vitro splicing phenotypes of mutations in these dinucleotide sequences. A 5' A residue can splice to any 3' residue, although C is preferred. A 5' G residue can splice to 3' G or U residues with a preference for G. Little or no splicing was observed to 3' A or C residues. A 5' U or C residue is highly deleterious for U12-dependent splicing, although some combinations, notably 5' U to 3' U produced detectable spliced products. The dependence of 3' splice site activity on the identity of the 5' residue provides evidence for communication between the first and last nucleotides of the intron. Most mutants in the second position of the 5' splice site and the next to last position of the 3' splice site were defective for splicing. Double mutants of these residues showed no evidence of communication between these nucleotides. Varying the distance between the branch site and the 3' splice site dinucleotide in the /GU-AG/ class showed that a somewhat larger range of distances was functional than for the /AU-AC/ class. The optimum branch site to 3' splice site distance of 11-12 nucleotides appears to be the same for both classes.

Spatial organization of protein-RNA interactions in the branch site-3' splice site region during pre-mRNA splicing in yeast

A series of efficiently spliced pre-mRNA substrates containing single 4-thiouridine residues were used to monitor RNA-protein interactions involving the branch site-3' splice site-3' exon region during yeast pre-mRNA splicing through cross-linking analysis. Prior to the assembly of the prespliceosome, Mud2p and the branch point bridging protein cross-link to a portion of this region in an ATP-independent fashion. Assembly of the prespliceosome leads to extensive cross-linking of the U2-associated protein Hsh155p to this region. Following the first step of splicing and in a manner independent of Prp16p, the U5 small nuclear ribonucleoprotein particle-associated protein Prp8p also associates extensively with the branch site-3' splice site-3' exon region. The subsequent cross-linking of Prp16p to the lariat intermediate is restricted to the 3' splice site and the adjacent 3' exon sequence. Using modified substrates to either mutationally or chemically block the second step, we found that the association of Prp22p with the lariat intermediate represents an authentic transient intermediate and appears to be restricted to the last eight intron nucleotides. Completion of the second step leads to the cross-linking of an unidentified approximately 80-kDa protein near the branch site sequence, suggesting a potential role for this protein in a later step in intron metabolism. Taken together, these data provide a detailed portrayal of the dynamic associations of proteins with the branch site-3' splice site region during spliceosome assembly and catalysis.

Splicing regulation at the second catalytic step by Sex-lethal involves 3' splice site recognition by SPF45

The Drosophila protein Sex-lethal (SXL) promotes skipping of exon 3 from its own pre-mRNA. An unusual sequence arrangement of two AG dinucleotides and an intervening polypyrimidine (Py)-tract at the 3' end of intron 2 is important for Sxl autoregulation. Here we show that U2AF interacts with the Py-tract and downstream AG, whereas the spliceosomal protein SPF45 interacts with the upstream AG and activates it for the second catalytic step of the splicing reaction. SPF45 represents a new class of second step factors, and its interaction with SXL blocks splicing at the second step. These results are in contrast with other known mechanisms of splicing regulation, which target early events of spliceosome assembly. A similar role for SPF45 is demonstrated in the activation of a cryptic 3' ss generated by a mutation that causes human beta-thalassemia.

Genetic interactions between the 5' and 3' splice site consensus sequences and U6 snRNA during the second catalytic step of pre-mRNA splicing

The YAG/ consensus sequence at the 3' end of introns (the slash indicates the location of the 3' splice site) is essential for catalysis of the second step of pre-mRNA splicing. Little is known about the interactions formed by these three nucleotides in the spliceosome. Although previous observations have suggested that the G of the YAG/ interacts with the first nucleotide of the /GUA consensus sequence at the 5' end of the intron, additional interactions have not been identified. Here we report several striking genetic interactions between A+3 of the 5' /GUA with Y-3 of the 3' YAG/ and G50 of the highly conserved ACAGAG motif in U6 snRNA. Two mutations in U6 G50 of the ACAGAG can weakly suppress two mutations in A+3 of the 5' /GUA. This suppression is significantly enhanced upon the inclusion of a specific mutation Y-3 in the 3' YAG/. RNA analysis confirmed that the severe splicing defect observed in A+3 and Y-3 double mutants can be rescued to near wild-type levels by the mutations in U6 G50. The contributions of each mutation to the genetic interaction and the strong position specificity of suppression, combined with previous findings, support a model in which the 5' /GUA and the GAG of U6 function in binding the 3' YAG/ during the second catalytic step.

Role of the 3' splice site in U12-dependent intron splicing

U12-dependent introns containing alterations of the 3' splice site AC dinucleotide or alterations in the spacing between the branch site and the 3' splice site were examined for their effects on splice site selection in vivo and in vitro. Using an intron with a 5' splice site AU dinucleotide, any nucleotide could serve as the 3'-terminal nucleotide, although a C residue was most active, while a U residue was least active. The penultimate A residue, by contrast, was essential for 3' splice site function. A branch site-to-3' splice site spacing of less than 10 or more than 20 nucleotides strongly activated alternative 3' splice sites. A strong preference for a spacing of about 12 nucleotides was observed. The combined in vivo and in vitro results suggest that the branch site is recognized in the absence of an active 3' splice site but that formation of the prespliceosomal complex A requires an active 3' splice site. Furthermore, the U12-type spliceosome appears to be unable to scan for a distal 3' splice site.

Switch in 3' splice site recognition between exon definition and splicing catalysis is important for sex-lethal autoregulation

Maintenance of female sexual identity in Drosophila melanogaster involves an autoregulatory loop in which the protein Sex-lethal (SXL) promotes skipping of exon 3 from its own pre-mRNA. We have used transient transfection of Drosophila Schneider cells to analyze the role of exon 3 splice sites in regulation. Our results indicate that exon 3 repression requires competition between the 5' splice sites of exons 2 and 3 but is independent of their relative strength. Two 3' splice site AG's precede exon 3. We report here that, while the distal site plays a critical role in defining the exon, the proximal site is preferentially used for the actual splicing reaction, arguing for a switch in 3' splice site recognition between exon definition and splicing catalysis. Remarkably, the presence of the two 3' splice sites is important for the efficient regulation by SXL, suggesting that SXL interferes with molecular events occurring between initial splice site communication across the exon and the splice site pairing that leads to intron removal.

An upstream AG determines whether a downstream AG is selected during catalytic step II of splicing

Specific mechanisms must exist to ensure fidelity in selecting the AG dinucleotide that functions as the 3' splice site during the second transesterification step of splicing. Here we show that the optimal location for this AG is within a narrow distance (19 to 23 nucleotides [nt]) downstream from the branch point sequence (BPS). Contrary to previous expectations, AGs located less than 23 nt from the BPS are always recognized, even when a second AG located more optimally downstream is used in the transesterification reaction. Indeed, the AG closest to the BPS actually dictates the precise location of the AG that engages in the reaction. This mechanism, in which the AG is identified by a general localization step followed by a precise localization step, may be used to achieve fidelity while allowing flexibility in the location of 3' splice sites.

Splicing factor slt11p and its involvement in formation of U2/U6 helix II in activation of the yeast spliceosome

Slt11p is a new splicing factor identified on the basis of synthetic lethality with a mutation in the 5' end of U2 snRNA, a region that is involved in intermolecular U2/U6 helix II interaction. Slt11p is required for spliceosome assembly. Our genetic results suggest that Slt11p is involved in the base-pairing interaction of U2/U6 helix II in vivo. We showed that the recombinant protein binds to RNAs with some degree of structural specificity. Slt11p also anneals RNA and binds to the resulting duplexes, which contain two separated helical regions. These RNA structures are reminiscent of U2/U6 helix II, which is formed concomitantly with U4/U6 stem II, and suggest that Slt11p facilitates the cooperative formation of helix II in association with stem II in the spliceosome. We show that Slt11p and Slu7p, a second-step factor, interact with each other both in vivo and in vitro and that the binding of Slu7p to Slt11p impairs the RNA-binding activity of the latter. These results suggest that the function of Slt11p is regulated by Slu7p in the spliceosome.

Mutational analysis of 3' splice site selection during trans-splicing

trans-Splicing is essential for mRNA maturation in trypanosomatids. A conserved AG dinucleotide serves as the 3' splice acceptor site, and analysis of native processing sites suggests that selection of this site is determined according to a 5'-3' scanning model. A series of stable gene replacement lines were generated that carried point mutations at or near the 3' splice site within the intergenic region separating CUB2.65, the calmodulin-ubiquitin associated gene, and FUS1, the ubiquitin fusion gene of Trypanosoma cruzi. In one stable line, the elimination of the native 3' splice acceptor site led to the accumulation of Y-branched splicing intermediates, which served as templates for mapping the first trans-splicing branch points in T. cruzi. In other lines, point mutations shifted the position of the first consensus AG dinucleotide either upstream or downstream of the wild-type 3' splice acceptor site in this intergenic region. Consistent with the scanning model, the first AG dinucleotide downstream of the branch points was used as the predominant 3' splice acceptor site. In all of the stable lines, the point mutations affected splicing efficiency in this region.

Multiple splicing defects in an intronic false exon

Splice site consensus sequences alone are insufficient to dictate the recognition of real constitutive splice sites within the typically large transcripts of higher eukaryotes, and large numbers of pseudoexons flanked by pseudosplice sites with good matches to the consensus sequences can be easily designated. In an attempt to identify elements that prevent pseudoexon splicing, we have systematically altered known splicing signals, as well as immediately adjacent flanking sequences, of an arbitrarily chosen pseudoexon from intron 1 of the human hprt gene. The substitution of a 5' splice site that perfectly matches the 5' consensus combined with mutation to match the CAG/G sequence of the 3' consensus failed to get this model pseudoexon included as the central exon in a dhfr minigene context. Provision of a real 3' splice site and a consensus 5' splice site and removal of an upstream inhibitory sequence were necessary and sufficient to confer splicing on the pseudoexon. This activated context also supported the splicing of a second pseudoexon sequence containing no apparent enhancer. Thus, both the 5' splice site sequence and the polypyrimidine tract of the pseudoexon are defective despite their good agreement with the consensus. On the other hand, the pseudoexon body did not exert a negative influence on splicing. The introduction into the pseudoexon of a sequence selected for binding to ASF/SF2 or its replacement with beta-globin exon 2 only partially reversed the effect of the upstream negative element and the defective polypyrimidine tract. These results support the idea that exon-bridging enhancers are not a prerequisite for constitutive exon definition and suggest that intrinsically defective splice sites and negative elements play important roles in distinguishing the real splicing signal from the vast number of false splicing signals.

Identification of a U2/U6 helix la mutant that influences 3' splice site selection during nuclear pre-mRNA splicing

Base substitutions in U2/U6 helix I, a conserved base-pairing interaction between the U6 and U2 snRNAs, have previously been found to specifically block the second catalytic step of nuclear pre-mRNA splicing. To further assess the role of U2/U6 helix I in the second catalytic step, we have screened mutations in U2/U6 helix I to identify those that influence 3' splice site selection using a derivative of the yeast actin pre-mRNA. In these derivatives, the spacing between the branch site adenosine and 3' splice site has been reduced from 43 to 12 nt and this results in enhanced splicing of mutants in the conserved 3' terminal intron residue. In this context, mutation of the conserved 3' intron terminal G to a C also results in the partial activation of a nearby cryptic 3' splice site with U as the 3' terminal intron nucleotide. Using this highly sensitive mutant substrate, we have identified a mutation in the U6 snRNA (U57A) that significantly increases the selection of the cryptic 3' splice site over the normal 3' splice site and augments its utilization relative to that observed with the wild-type U2 or U6 snRNAs. In a previous study, we found that the same U6 mutation suppressed the effects of an A-to-G branch site mutation in an allele-specific fashion. The ability of U6-U57 mutants to influence the fidelity of both branch site and 3' splice site recognition suggests that this nucleotide may participate in the formation of the active site(s) of the spliceosome.

A dual role for BBP/ScSF1 in nuclear pre-mRNA retention and splicing

The MSL5 gene, which codes for the splicing factor BBP/ScSF1, is essential in Saccharomyces cerevisiae, yet previous analyses failed to reveal a defect in assembly of (pre)-spliceosomes or in vitro splicing associated with its depletion. We generated 11 temperature-sensitive (ts) mutants and one cold-sensitive (cs) mutant in the corresponding gene and analyzed their phenotypes. While all mutants were blocked in the formation of commitment complex 2 (CC2) at non-permissive and permissive temperature, the ts mutants showed no defect in spliceosome formation and splicing in vitro. The cs mutant was defective in (pre)-spliceosome formation, but residual splicing activity could be detected. In vivo splicing of reporters carrying introns weakened by mutations in the 5' splice site and/or in the branchpoint region was affected in all mutants. Pre-mRNA leakage to the cytoplasm was strongly increased (up to 40-fold) in the mutants. A combination of ts mutants with a disruption of upf1, a gene involved in nonsense-mediated decay, resulted in a specific synthetic growth phenotype, suggesting that the essential function of SF1 in yeast could be related to the retention of pre-mRNA in the nucleus.

Transcription and proper splicing of a mammalian gene in yeast

The house mouse strain C57BL/6 harbours 64 copies of the multicopy gene Sp100-rs. Three of these are contained in the yeast artificial chromosome (YAC) clone yMm75. Four Sp100-rs transcripts of 3.0, 2.6, 1.6 and 1.3kb were detected by Northern hybridization in the yMm75-harbouring line of Saccharomyces cerevisiae. Additional and less abundant transcripts were detected by RT-PCR. With one exception, the YAC-derived Sp100-rs transcripts were a subset of those found in the C57BL/6 mouse. This indicates transcription and proper splicing of murine pre-mRNAs in yeast. Analysis of the splice sites shows that the yeast splicing machinery accepts splice sites that deviate from the standard yeast consensus sequences. It may be feasible, therefore, at least in a fair proportion of cases, to exploit the mammalian mRNAs present in transgenic yeast for gene recognition of YAC-inserts.

Interaction of the yeast DExH-box RNA helicase prp22p with the 3' splice site during the second step of nuclear pre-mRNA splicing

Using site-specific incorporation of the photo-chemical cross-linking reagent 4-thiouridine, we demonstrate the previously unknown association of two proteins with yeast 3' splice sites. One of these is an unidentified approximately 122 kDa protein that cross-links to 3' splice sites during formation of the pre--spliceosome. The other factor is the DExH-box RNA helicase, Prp22p. With substrates functional in the second step of splicing, only very weak cross-linking of Prp22p to intron sequences at the 3' splice site is observed. In contrast, substrates blocked at the second step exhibit strong cross-linking of Prp22 to intron sequences at the 3' splice site, but not to adjacent exon sequences. In vitro reconstitution experiments also show that the association of Prp22p with intron sequences at the 3' splice site is dependent on Prp16p and does not persist when release of mature mRNA from the spliceosome is blocked. Taken together, these results suggest that the 3' splice site of yeast introns is contacted much earlier than previously envisioned by a protein of approximately 120 kDa, and that a transient association of Prp22p with the 3' splice site occurs between the first and second catalytic steps.

Evidence for a linear search in bimolecular 3' splice site AG selection

In most eukaryotic introns the 3' splice site is defined by a surprisingly short AG consensus found a variable distance downstream of the branch site. Exactly how the spliceosome determines which AG to use, however, is not well understood. Previously we showed that when the branch site and 3' splice site AG are supplied by separate RNA molecules, there is a strong preference for use of the 5'-most AG in the 3' splice site-containing RNA. Here we show that this apparent 5'-->3' directionality holds even when this RNA contains four tandem repeats of a 6-nt sequence containing AG. Exactly the same pattern of 3' splice site choice was observed when the same tandem repeats were incorporated into a full-length splicing substrate. When the 3' splice site AG is supplied by a separate RNA, that RNA must be linear with an unobstructed 5' end. Similarly, the branch-containing RNA must be truncated immediately 3' to the polypyrimidine tract. A model is presented that incorporates these observations and reconciles previously proposed mechanisms for 3' splice site selection.

Inhibition of msl-2 splicing by Sex-lethal reveals interaction between U2AF35 and the 3' splice site AG

The protein Sex-lethal (SXL) controls dosage compensation in Drosophila by inhibiting the splicing and translation of male-specific-lethal-2 (msl-2) transcripts. Here we report that splicing inhibition of msl-2 requires a binding site for SXL at the polypyrimidine (poly(Y)) tract associated with the 3' splice site, and an unusually long distance between the poly(Y) tract and the conserved AG dinucleotide at the 3' end of the intron. Only this combination allows efficient blockage of U2 small nuclear ribonucleoprotein particle binding and displacement of the large subunit of the U2 auxiliary factor (U2AF65) from the poly(Y) tract by SXL. Crosslinking experiments with ultraviolet light indicate that the small subunit of U2AF (U2AF35) contacts the AG dinucleotide only when located in proximity to the poly(Y) tract. This interaction stabilizes U2AF65 binding such that SXL can no longer displace it from the poly(Y) tract. Our results reveal a novel function for U2AF35, a critical role for the 3' splice site AG at the earliest steps of spliceosome assembly and the need for a weakened U2AF35-AG interaction to regulate intron removal.

A conditional U5 snRNA mutation affecting pre-mRNA splicing and nuclear pre-mRNA retention identifies SSD1/SRK1 as a general splicing mutant suppressor

A combination of point mutations disrupting both stem 1 and stem 2 of U5 snRNA (U5AI) was found to confer a thermosensitive phenotype in vivo. In a strain expressing U5AI, pre-mRNA splicing was blocked before the first step through an inability of the mutant U5 snRNA to efficiently associate with the U4/U6 di-snRNP. Formation of early splicing complexes was not affected in extracts prepared from U5 snRNA mutant cells, while the capacity of these extracts to splice a pre-mRNA in vitro was greatly diminished. In addition, significant levels of a translation product derived from intron containing pre-mRNAs could be detected in vivo. The SSD1/SRK1 gene was identified as a multi-copy suppressor of the U5AI snRNA mutant. Single copy expression of SSD1/SRK1 was sufficient to suppress the thermosensitive phenotype, and high copy expression partially suppressed the splicing and U4/U6.U5 tri-snRNP assembly pheno-types. SSD1/SRK1 also suppressed thermosensitive mutations in the Prp18p and U1-70K proteins, while inhibiting growth of the cold sensitive U1-4U snRNA mutant at 30 degrees C. Thus we have identified SSD1/SRK1 as a general suppressor of splicing mutants.