Sequence specificity of viral end DNA binding by HIV-1 integrase reveals critical regions for protein-DNA interaction

Retroviral PBS-segment sequence and structure: Orchestrating early and late replication events

An essential regulatory hub for retroviral replication events, the 5' untranslated region (UTR) encodes an ensemble of cis-acting replication elements that overlap in a logical manner to carry out divergent RNA activities in cells and in virions. The primer binding site (PBS) and primer activation sequence initiate the reverse transcription process in virions, yet overlap with structural elements that regulate expression of the complex viral proteome. PBS-segment also encompasses the attachment site for Integrase to cut and paste the 3' long terminal repeat into the host chromosome to form the provirus and purine residues necessary to execute the precise stoichiometry of genome-length transcripts and spliced viral RNAs. Recent genetic mapping, cofactor affinity experiments, NMR and SAXS have elucidated that the HIV-1 PBS-segment folds into a three-way junction structure. The three-way junction structure is recognized by the host's nuclear RNA helicase A/DHX9 (RHA). RHA tethers host trimethyl guanosine synthase 1 to the Rev/Rev responsive element (RRE)-containing RNAs for m7-guanosine Cap hyper methylation that bolsters virion infectivity significantly. The HIV-1 trimethylated (TMG) Cap licenses specialized translation of virion proteins under conditions that repress translation of the regulatory proteins. Clearly host-adaption and RNA shapeshifting comprise the fundamental basis for PBS-segment orchestrating both reverse transcription of virion RNA and the nuclear modification of m7G-Cap for biphasic translation of the complex viral proteome. These recent observations, which have exposed even greater complexity of retroviral RNA biology than previously established, are the impetus for this article. Basic research to fully comprehend the marriage of PBS-segment structures and host RNA binding proteins that carry out retroviral early and late replication events is likely to expose an immutable virus-specific therapeutic target to attenuate retrovirus proliferation.

Structure of HIV-1 RRE stem-loop II identifies two conformational states of the high-affinity Rev binding site

During HIV infection, specific RNA-protein interaction between the Rev response element (RRE) and viral Rev protein is required for nuclear export of intron-containing viral mRNA transcripts. Rev initially binds the high-affinity site in stem-loop II, which promotes oligomerization of additional Rev proteins on RRE. Here, we present the crystal structure of RRE stem-loop II in distinct closed and open conformations. The high-affinity Rev-binding site is located within the three-way junction rather than the predicted stem IIB. The closed and open conformers differ in their non-canonical interactions within the three-way junction, and only the open conformation has the widened major groove conducive to initial Rev interaction. Rev binding assays show that RRE stem-loop II has high- and low-affinity binding sites, each of which binds a Rev dimer. We propose a binding model, wherein Rev-binding sites on RRE are sequentially created through structural rearrangements induced by Rev-RRE interactions.

DNA ultra-sensitive quantification, a technology for studying HIV unintegrated linear DNA

Unintegrated HIV DNA represents between 20% and 35% of the total viral DNA in infected patients. Only the linear forms (unintegrated linear DNAs [ULDs]) can be substrates for integration and for the completion of a full viral cycle. In quiescent cells, these ULDs may be responsible for pre-integrative latency. However, their detection remains difficult due to the lack of specificity and sensitivity of existing techniques. We developed an ultra-sensitive, specific, and high-throughput technology for ULD quantification called DUSQ (DNA ultra-sensitive quantification) combining linker-mediated PCR and next-generation sequencing (NGS) using molecular barcodes. Studying cells with different activity levels, we determined that the ULD half-life goes up to 11 days in resting CD4⁺ T cells. Finally, we were able to quantify ULDs in samples from patients infected with HIV-1, providing a proof of concept for the use of DUSQ in vivo to track pre-integrative latency. DUSQ can be adapted to the detection of other rare DNA molecules.

Ty1 integrase is composed of an active N-terminal domain and a large disordered C-terminal module dispensable for its activity in vitro

Long-terminal repeat (LTR) retrotransposons are genetic elements that, like retroviruses, replicate by reverse transcription of an RNA intermediate into a complementary DNA (cDNA) that is next integrated into the host genome by their own integrase. The Ty1 LTR retrotransposon has proven to be a reliable working model to investigate retroelement integration site preference. However, the low yield of recombinant Ty1 integrase production reported so far has been a major obstacle for structural studies. Here we analyze the biophysical and biochemical properties of a stable and functional recombinant Ty1 integrase highly expressed in E.coli. The recombinant protein is monomeric and has an elongated shape harboring the three-domain structure common to all retroviral integrases at the N-terminal half, an extra folded region, and a large intrinsically disordered region at the C-terminal half. Recombinant Ty1 integrase efficiently catalyzes concerted integration in vitro, and the N-terminal domain displays similar activity. These studies that will facilitate structural analyses may allow elucidating the molecular mechanisms governing Ty1 specific integration into safe places in the genome.

HIV-1 Integrase Inhibitors with Modifications That Affect Their Potencies against Drug Resistant Integrase Mutants

Integrase strand transfer inhibitors (INSTIs) block the integration step of the retroviral lifecycle and are first-line drugs used for the treatment of HIV-1/AIDS. INSTIs have a polycyclic core with heteroatom triads, chelate the metal ions at the active site, and have a halobenzyl group that interacts with viral DNA attached to the core by a flexible linker. The most broadly effective INSTIs inhibit both wild-type (WT) integrase (IN) and a variety of well-known mutants. However, because there are mutations that reduce the potency of all of the available INSTIs, new and better compounds are needed. Models based on recent structures of HIV-1 and red-capped mangabey SIV INs suggest modifications in the INSTI structures that could enhance interactions with the 3′-terminal adenosine of the viral DNA, which could improve performance against INSTI resistant mutants. We designed and tested a series of INSTIs having modifications to their naphthyridine scaffold. One of the new compounds retained good potency against an expanded panel of HIV-1 IN mutants that we tested. Our results suggest the possibility of designing inhibitors that combine the best features of the existing compounds, which could provide additional efficacy against known HIV-1 IN mutants.

HIV-1 Integrase Inhibitors with Modifications That Affect Their Potencies against Drug Resistant Integrase Mutants

Integrase strand transfer inhibitors (INSTIs) block the integration step of the retroviral lifecycle and are first-line drugs used for the treatment of HIV-1/AIDS. INSTIs have a polycyclic core with heteroatom triads, chelate the metal ions at the active site, and have a halobenzyl group that interacts with viral DNA attached to the core by a flexible linker. The most broadly effective INSTIs inhibit both wild-type (WT) integrase (IN) and a variety of well-known mutants. However, because there are mutations that reduce the potency of all of the available INSTIs, new and better compounds are needed. Models based on recent structures of HIV-1 and red-capped mangabey SIV INs suggest modifications in the INSTI structures that could enhance interactions with the 3'-terminal adenosine of the viral DNA, which could improve performance against INSTI resistant mutants. We designed and tested a series of INSTIs having modifications to their naphthyridine scaffold. One of the new compounds retained good potency against an expanded panel of HIV-1 IN mutants that we tested. Our results suggest the possibility of designing inhibitors that combine the best features of the existing compounds, which could provide additional efficacy against known HIV-1 IN mutants.

Integrase Strand Transfer Inhibitors Are Effective Anti-HIV Drugs

Integrase strand transfer inhibitors (INSTIs) are currently recommended for the first line treatment of human immunodeficiency virus type one (HIV-1) infection. The first-generation INSTIs are effective but can select for resistant viruses. Recent advances have led to several potent second-generation INSTIs that are effective against both wild-type (WT) HIV-1 integrase and many of the first-generation INSTI-resistant mutants. The emergence of resistance to these new second-generation INSTIs has been minimal, which has resulted in alternative treatment strategies for HIV-1 patients. Moreover, because of their high antiviral potencies and, in some cases, their bioavailability profiles, INSTIs will probably have prominent roles in pre-exposure prophylaxis (PrEP). Herein, we review the current state of the clinically relevant INSTIs and discuss the future outlook for this class of antiretrovirals.

NKNK: a New Essential Motif in the C-Terminal Domain of HIV-1 Group M Integrases

Using coevolution network interference based on comparison of two phylogenetically distantly related isolates, one from the main group M and the other from the minor group O of HIV-1, we identify, in the C-terminal domain (CTD) of integrase, a new functional motif constituted by four noncontiguous amino acids (N₂₂₂K₂₄₀N₂₅₄K₂₇₃). Mutating the lysines abolishes integration through decreased 3' processing and inefficient nuclear import of reverse-transcribed genomes. Solution of the crystal structures of wild-type (wt) and mutated CTDs shows that the motif generates a positive surface potential that is important for integration. The number of charges in the motif appears more crucial than their position within the motif. Indeed, the positions of the K's could be permutated or additional K's could be inserted in the motif, generally without affecting integration per se Despite this potential genetic flexibility, the NKNK arrangement is strictly conserved in natural sequences, indicative of an effective purifying selection exerted at steps other than integration. Accordingly, reverse transcription was reduced even in the mutants that retained wt integration levels, indicating that specifically the wt sequence is optimal for carrying out the multiple functions that integrase exerts. We propose that the existence of several amino acid arrangements within the motif, with comparable efficiencies of integration per se, might have constituted an asset for the acquisition of additional functions during viral evolution.IMPORTANCE Intensive studies of HIV-1 have revealed its extraordinary ability to adapt to environmental and immunological challenges, an ability that is also at the basis of antiviral treatment escape. Here, by deconvoluting the different roles of the viral integrase in the various steps of the infectious cycle, we report how the existence of alternative equally efficient structural arrangements for carrying out one function opens up the possibility of adapting to the optimization of further functionalities exerted by the same protein. Such a property provides an asset to increase the efficiency of the infectious process. On the other hand, though, the identification of this new motif provides a potential target for interfering simultaneously with multiple functions of the protein.

Efficient Nonviral Stable Transgenesis Mediated by Retroviral Integrase

Efficient transgene delivery is critical for genetic manipulation and therapeutic intervention of target cells. Two well-characterized integrative systems have been described that rely on viral and nonviral vectors. However, use of viral vectors for gene therapy has been associated with several safety concerns. Here, we report a virus-free method for stable transgenesis based on the reaction of retroviral integrase. We constructed a gateway cloning compatible vector containing two truncated long terminal repeat (LTR) sequences (dLTR) that flank the transgene cassette. Notably, 5′-ACTG-3′ and blunt-end restriction cutting sites were also embedded at the end of dLTR to be recognized by HIV-1 integrase. When performing coinjection of transgene cassette and integrase mRNA into zebrafish embryos at one cell stage, there were 50% to 55% of injected embryos expressing a marker gene in a desired pattern. When applying our method in mammalian cells, there were 42% of cultured human epithelial cell lines showing stable integration. These results demonstrated that our method can successfully insert an exogenous gene into the host genome with highly efficient integration. Importantly, this system operates without most of the viral components while retaining effective stable transgenesis. We anticipate this method will provide a convenient, safe, and highly efficient way for applications in transgenesis and gene therapy.

Identifying integration sites of the HIV-1 genome with intact and aberrant ends through deep sequencing

Paired-end deep sequencing is a powerful tool to investigate integration sites of the HIV-1 genome in infected cells. Integration sites of HIV-1 proviral DNA carrying intact LTR ends have been well documented. In contrast, integration sites of proviral DNA with aberrant ends, which emerge infrequently but can also induce replication-competent viruses, have not been extensively examined, in part, because of the lack of a suitable bioinformatics method for deep sequencing. Here, we report a novel bioinformatics protocol, named the VINSSRM, to search for integration sites of proviral DNA carrying intact and aberrant LTR ends using paired-end deep sequencing data. The protocol incorporates split-read mapping to assign viral and human genome parts within read sequences and overlapping paired-end read merging to construct long error-corrected sequences. The VINSSRM not only consistently detects integration sites similar to the conventional method but also provides information on additional integration sites, including those of proviral DNA with aberrant ends, which were mainly found in non-exonic regions of the human genome. Therefore, the VINSSRM may help us to understand HIV-1 integration, persistence of infected cells, and viral latency.

1,2,3,4-Tetrahydroisoquinolines as inhibitors of HIV-1 integrase and human LEDGF/p75 interaction

Alkaloids are a class of organic compounds with a wide range of biological properties, including anti-HIV activity. The 1,2,3,4-tetrahydroisoquinoline is a ubiquitous structural motif of many alkaloids. Using a short and an efficient route for synthesis, a series of 1,2,3,4-tetrahydroisoquinolines/isoquinolines was developed. These compounds have been analysed for their ability to inhibit an important interaction between HIV-1 integrase enzyme (IN) and human LEDGF/p75 protein (p75) which assists in the viral integration into the active genes. A lead compound 6d is found to inhibit the LEDGF/p75-IN interaction in vitro with an IC₅₀ of ~10 μm. Molecular docking analysis of the isoquinoline 6d reveals its interactions with the LEDGF/p75-binding residues of IN. Based on an order of addition experiment, the binding of 6d or LEDGF/p75 to IN is shown to be mutually exclusive. Also, the activity of 6d in vitro is found to be unaffected by the presence of a non-specific DNA. As reported earlier for the inhibitors of LEDGF/p75-IN interaction, 6d exhibits a potent inhibition of both the early and late stages of HIV-1 replication. Compound 6d differing from the known inhibitors in the chemical moieties and interactions with CCD could potentially be explored further for developing small molecule inhibitors of LEDGF/p75-IN interaction having a higher potency.

Different Pathways Leading to Integrase Inhibitors Resistance

Integrase strand-transfer inhibitors (INSTIs), such as raltegravir (RAL), elvitegravir, or dolutegravir (DTG), are efficient antiretroviral agents used in HIV treatment in order to inhibit retroviral integration. By contrast to RAL treatments leading to well-identified mutation resistance pathways at the integrase level, recent clinical studies report several cases of patients failing DTG treatment without clearly identified resistance mutation in the integrase gene raising questions for the mechanism behind the resistance. These compounds, by impairing the integration of HIV-1 viral DNA into the host DNA, lead to an accumulation of unintegrated circular viral DNA forms. This viral DNA could be at the origin of the INSTI resistance by two different ways. The first one, sustained by a recent report, involves 2-long terminal repeat circles integration and the second one involves expression of accumulated unintegrated viral DNA leading to a basal production of viral particles maintaining the viral information.

Selectivity for strand-transfer over 3'-processing and susceptibility to clinical resistance of HIV-1 integrase inhibitors are driven by key enzyme-DNA interactions in the active site

Integrase strand transfer inhibitors (INSTIs) are highly effective against HIV infections. Co-crystal structures of the prototype foamy virus intasome have shown that all three FDA-approved drugs, raltegravir (RAL), elvitegravir and dolutegravir (DTG), act as interfacial inhibitors during the strand transfer (ST) integration step. However, these structures give only a partial sense for the limited inhibition of the 3′-processing reaction by INSTIs and how INSTIs can be modified to overcome drug resistance, notably against the G140S-Q148H double mutation. Based on biochemical experiments with modified oligonucleotides, we demonstrate that both the viral DNA +1 and −1 bases, which flank the 3′-processing site, play a critical role for 3′-processing efficiency and inhibition by RAL and DTG. In addition, the G140S-Q148H (SH) mutant integrase, which has a reduced 3′-processing activity, becomes more active and more resistant to inhibition of 3′-processing by RAL and DTG in the absence of the −1 and +1 bases. Molecular modeling of HIV-1 integrase, together with biochemical data, indicate that the conserved residue Q146 in the flexible loop of HIV-1 integrase is critical for productive viral DNA binding through specific contacts with the virus DNA ends in the 3′-processing and ST reactions. The potency of integrase inhibitors against 3′-processing and their ability to overcome resistance is discussed.

Different Pathways Leading to Integrase Inhibitors Resistance

Integrase strand-transfer inhibitors (INSTIs), such as raltegravir (RAL), elvitegravir, or dolutegravir (DTG), are efficient antiretroviral agents used in HIV treatment in order to inhibit retroviral integration. By contrast to RAL treatments leading to well-identified mutation resistance pathways at the integrase level, recent clinical studies report several cases of patients failing DTG treatment without clearly identified resistance mutation in the integrase gene raising questions for the mechanism behind the resistance. These compounds, by impairing the integration of HIV-1 viral DNA into the host DNA, lead to an accumulation of unintegrated circular viral DNA forms. This viral DNA could be at the origin of the INSTI resistance by two different ways. The first one, sustained by a recent report, involves 2-long terminal repeat circles integration and the second one involves expression of accumulated unintegrated viral DNA leading to a basal production of viral particles maintaining the viral information.

C-Terminal Domain of Integrase Binds between the Two Active Sites

HIV integrase (HIV-IN), one of three HIV enzymes, is a target for the treatment of AIDS, but the full biological assembly has been difficult to characterize, hampering inhibitor design. The recent crystallographic structures of integrase from prototype foamy virus (PFV-IN) with bound DNA were a breakthrough, revealing how viral DNA organizes two integrase dimers into a tetramer that has the two active sites appropriately spaced for insertion of the viral DNA into host DNA. The organization of domains within each PFV-IN protein chain, however, varies significantly from that found in HIV-IN structures. With the goal of identifying shared structural characteristics, the interactions among components of the PFV-IN and HIV-IN assemblies were investigated with the macromolecular docking program DOT. DOT performs an exhaustive, rigid-body search between two macromolecules. Computational docking reproduced the crystallographic interactions of the PFV-IN catalytic and N-terminal domains with viral DNA and found similar viral DNA interactions for HIV-IN. Computational docking did not reproduce the crystallographic interactions of the PFV-IN C-terminal domain (CTD). Instead, two symmetry-related positions were found for the PFV-IN CTD that indicate formation of a CTD dimer between the two active sites. Our predicted CTD dimer is consistent with cross-linking studies showing interactions of the CTD with viral DNA that appear to be blocked in the PFV-IN structures. The CTD dimer can insert two arginine-rich loops between the two bound vDNA molecules and the host DNA, a region that is unoccupied in the PFV-IN crystallographic structures. The positive potential from these two loops would alleviate the large negative potential created by the close proximity of two viral vDNA ends, helping to bring together the two active sites and assisting host DNA binding. This study demonstrates the ability of computational docking to evaluate complex crystallographic assemblies, identify interactions that are influenced by the crystal environment, and provide plausible alternatives.

Retroviral Integrase Structure and DNA Recombination Mechanism

Due to the importance of human immunodeficiency virus type 1 (HIV-1) integrase as a drug target, the biochemistry and structural aspects of retroviral DNA integration have been the focus of intensive research during the past three decades. The retroviral integrase enzyme acts on the linear double-stranded viral DNA product of reverse transcription. Integrase cleaves specific phosphodiester bonds near the viral DNA ends during the 3' processing reaction. The enzyme then uses the resulting viral DNA 3'-OH groups during strand transfer to cut chromosomal target DNA, which simultaneously joins both viral DNA ends to target DNA 5'-phosphates. Both reactions proceed via direct transesterification of scissile phosphodiester bonds by attacking nucleophiles: a water molecule for 3' processing, and the viral DNA 3'-OH for strand transfer. X-ray crystal structures of prototype foamy virus integrase-DNA complexes revealed the architectures of the key nucleoprotein complexes that form sequentially during the integration process and explained the roles of active site metal ions in catalysis. X-ray crystallography furthermore elucidated the mechanism of action of HIV-1 integrase strand transfer inhibitors, which are currently used to treat AIDS patients, and provided valuable insights into the mechanisms of viral drug resistance.

Biochemical properties of the xenotropic murine leukemia virus-related virus integrase

Xenotropic Murine Leukemia Virus-related Virus (XMRV) is a new gammaretrovirus generated by genetic recombination between two murine endogenous retroviruses, PreXMRV1 and PreXMRV2, during passaging of human prostate cancer xenografts in laboratory mice. XMRV is representative of an early founder virus that jumps species from mouse to human cell lines. Relatively little information is available concerning the XMRV integrase (IN), an enzyme that catalyzes a key stage in the retroviral cycle, and whose sequence is conserved among replication competent retroviruses emerging from recombination between the murine endogenous PreXMRV-1 and PreXMRV-2 genomes. Previous studies have shown that IN inhibitors efficiently block XMRV multiplication in cells. We thus aimed at characterizing the biochemical properties and sensitivity of the XMRV IN to the raltegravir, dolutegravir, 118-D-24 and elvitegravir inhibitors in vitro. We report for the first time the purification and enzymatic characterization of recombinant XMRV IN. This IN, produced in Escherichia coli and purified under native conditions, is optimally active over a pH range of 7-8.5, in the presence of Mg(2+) (15 mM and 30 mM for 3'-processing and strand transfer, respectively) and is poorly sensitive to the addition of dithiothreitol. Raltegravir was shown to be a very potent inhibitor (IC50 ∼ 30 nM) whereas dolutegravir and elvitegravir were less effective (IC50 ∼ 230 nM and 650 nM, respectively). The 118-D-24 drug had no impact on XMRV IN activity. Interestingly, the substrate specificity of XMRV IN seems to be less marked compared to HIV-1 IN since XMRV IN is able to process various donor substrates that share little homology. Finally, our analysis revealed some original properties of the XMRV IN such as its relatively low sequence specificity.

HIV-2 integrase polymorphisms and longitudinal genotypic analysis of HIV-2 infected patients failing a raltegravir-containing regimen

To characterize the HIV-2 integrase gene polymorphisms and the pathways to resistance of HIV-2 patients failing a raltegravir-containing regimen, we studied 63 integrase strand transfer inhibitors (INSTI)-naïve patients, and 10 heavily pretreated patients exhibiting virological failure while receiving a salvage raltegravir-containing regimen. All patients were infected by HIV-2 group A. 61.4% of the integrase residues were conserved, including the catalytic motif residues. No INSTI-major resistance mutations were detected in the virus population from naïve patients, but two amino acids that are secondary resistance mutations to INSTIs in HIV-1 were observed. The 10 raltegravir-experienced patients exhibited resistance mutations via three main genetic pathways: N155H, Q148R, and eventually E92Q - T97A. The 155 pathway was preferentially used (7/10 patients). Other mutations associated to raltegravir resistance in HIV-1 were also observed in our HIV-2 population (V151I and D232N), along with several novel mutations previously unreported. Data retrieved from this study should help build a more robust HIV-2-specific algorithm for the genotypic interpretation of raltegravir resistance, and contribute to improve the clinical monitoring of HIV-2-infected patients.

Past and future. Current drugs targeting HIV-1 integrase and reverse transcriptase-associated ribonuclease H activity: single and dual active site inhibitors

Catalytic HIV type-1 (HIV-1) integrase (IN) and ribonuclease H (RNase H) domains belong to the polynucleotidyl transferase superfamily and are characterized by highly conserved motifs that coordinate two divalent Mg(2+) cations and are attractive targets for new antiviral agents. Several structural features of both domains are now available. Drugs targeting the HIV-1 IN are currently approved for anti-HIV therapy, while no drug targeting the HIV-1 RNase H function is yet available. This review describes HIV-1 IN and the RNase H function and structures, compounds targeting their active sites and dual inhibition as a new approach for drug development.

Molecular features related to HIV integrase inhibition obtained from structure- and ligand-based approaches

Among several biological targets to treat AIDS, HIV integrase is a promising enzyme that can be employed to develop new anti-HIV agents. The aim of this work is to propose a mechanistic interpretation of HIV-1 integrase inhibition and to rationalize the molecular features related to the binding affinity of studied ligands. A set of 79 HIV-1 integrase inhibitors and its relationship with biological activity are investigated employing 2D and 3D QSAR models, docking analysis and DFT studies. Analyses of docking poses and frontier molecular orbitals revealed important features on the main ligand-receptor interactions. 2D and 3D models presenting good internal consistency, predictive power and stability were obtained in all cases. Significant correlation coefficients (r(2) = 0.908 and q(2)= 0.643 for 2D model; r(2)= 0.904 and q(2)= 0.719 for 3D model) were obtained, indicating the potential of these models for untested compounds. The generated holograms and contribution maps revealed important molecular requirements to HIV-1 IN inhibition and several evidences for molecular modifications. The final models along with information resulting from molecular orbitals, 2D contribution and 3D contour maps should be useful in the design of new inhibitors with increased potency and selectivity within the chemical diversity of the data.

Dolutegravir interactions with HIV-1 integrase-DNA: structural rationale for drug resistance and dissociation kinetics

Signature HIV-1 integrase mutations associated with clinical raltegravir resistance involve 1 of 3 primary genetic pathways, Y143C/R, Q148H/K/R and N155H, the latter 2 of which confer cross-resistance to elvitegravir. In accord with clinical findings, in vitro drug resistance profiling studies with wild-type and site-directed integrase mutant viruses have shown significant fold increases in raltegravir and elvitegravir resistance for the specified viral mutants relative to wild-type HIV-1. Dolutegravir, in contrast, has demonstrated clinical efficacy in subjects failing raltegravir therapy due to integrase mutations at Y143, Q148 or N155, which is consistent with its distinct in vitro resistance profile as dolutegravir's antiviral activity against these viral mutants is equivalent to its activity against wild-type HIV-1. Kinetic studies of inhibitor dissociation from wild-type and mutant integrase-viral DNA complexes have shown that dolutegravir also has a distinct off-rate profile with dissociative half-lives substantially longer than those of raltegravir and elvitegravir, suggesting that dolutegravir's prolonged binding may be an important contributing factor to its distinct resistance profile. To provide a structural rationale for these observations, we constructed several molecular models of wild-type and clinically relevant mutant HIV-1 integrase enzymes in complex with viral DNA and dolutegravir, raltegravir or elvitegravir. Here, we discuss our structural models and the posited effects that the integrase mutations and the structural and electronic properties of the integrase inhibitors may have on the catalytic pocket and inhibitor binding and, consequently, on antiviral potency in vitro and in the clinic.

Raltegravir flexibility and its impact on recognition by the HIV-1 IN targets

HIV-1 IN is a pertinent target for the development of AIDS chemotherapy. The first IN-specific inhibitor approved for the treatment of HIV/AIDS, RAL, was designed to block the ST reaction. We characterized the structural and conformational features of RAL and its recognition by putative HIV-1 targets - the unbound IN, the vDNA, and the IN•vDNA complex - mimicking the IN states over the integration process. RAL binding to the targets was studied by performing an extensive sampling of the inhibitor conformational landscape and by using four different docking algorithms: Glide, Autodock, VINA, and SurFlex. The obtained data evidenced that: (i) a large binding pocket delineated by the active site and an extended loop in the unbound IN accommodates RAL in distinct conformational states all lacking specific interactions with the target; (ii) a well-defined cavity formed by the active site, the vDNA, and the shortened loop in the IN•vDNA complex provide a more optimized inhibitor binding site in which RAL chelates Mg(2+) cations; (iii) a specific recognition between RAL and the unpaired cytosine of the processed DNA is governed by a pair of strong H-bonds similar to those observed in DNA base pair G-C. The identified RAL pose at the cleaved vDNA shed light on a putative step of RAL inhibition mechanism. This modeling study indicates that the inhibition process may include as a first step RAL recognition by the processed vDNA bound to a transient intermediate IN state, and thus provides a potentially promising route to the design of IN inhibitors with improved affinity and selectivity.

Directed DNA shuffling of retrovirus and retrotransposon integrase protein domains

Chimeric proteins are used to study protein domain functions and to recombine protein domains for novel or optimal functions. We used a library of chimeric integrase proteins to study DNA integration specificity. The library was constructed using a directed shuffling method that we adapted from fusion PCR. This method easily and accurately shuffles multiple DNA gene sequences simultaneously at specific base-pair positions, such as protein domain boundaries. It produced all 27 properly-ordered combinations of the amino-terminal, catalytic core, and carboxyl-terminal domains of the integrase gene from human immunodeficiency virus, prototype foamy virus, and Saccharomyces cerevisiae retrotransposon Ty3. Retrotransposons can display dramatic position-specific integration specificity compared to retroviruses. The yeast retrotransposon Ty3 integrase interacts with RNA polymerase III transcription factors to target integration at the transcription initiation site. In vitro assays of the native and chimeric proteins showed that human immunodeficiency virus integrase was active with heterologous substrates, whereas prototype foamy virus and Ty3 integrases were not. This observation was consistent with a lower substrate specificity for human immunodeficiency virus integrase than for other retrovirus integrases. All eight chimeras containing the Ty3 integrase carboxyl-terminal domain, a candidate targeting domain, failed to target strand transfer in the presence of the targeting protein, suggesting that multiple domains of the Ty3 integrase cooperate in this function.

A homology model of HIV-1 integrase and analysis of mutations designed to test the model

Although there are structures of the different domains of human immunodeficiency virus type 1 (HIV-1) integrase (IN), there is no structure of the entire protein. The recently determined crystal structures of the prototype foamy virus (PFV) IN tetramer, in complexes with viral DNA, led to the generation of models of full-length HIV-1 IN. These models were generated, in part, by superimposing the structures of the domains of HIV-1 IN onto the structure of full-length PFV IN. We developed a model for HIV-1 IN-based solely on its sequence alignment with PFV IN-that differs in several ways from the previous models. Specifically, in our model, the junction between the catalytic core domain and C-terminal domain adopts a helix-loop-helix motif that is similar to the corresponding segment of PFV IN and differs from the crystal structures of these two HIV-1 IN domains. The alignment of residues in the C-terminal domain also differs from the previous models. Our model can be used to explain the phenotype of previously published HIV-1 IN mutants. We made additional mutants, and the behavior of these new mutants provides additional support for the model.

A possible role for the asymmetric C-terminal domain dimer of Rous sarcoma virus integrase in viral DNA binding

Integration of the retrovirus linear DNA genome into the host chromosome is an essential step in the viral replication cycle, and is catalyzed by the viral integrase (IN). Evidence suggests that IN functions as a dimer that cleaves a dinucleotide from the 3′ DNA blunt ends while a dimer of dimers (tetramer) promotes concerted integration of the two processed ends into opposite strands of a target DNA. However, it remains unclear why a dimer rather than a monomer of IN is required for the insertion of each recessed DNA end. To help address this question, we have analyzed crystal structures of the Rous sarcoma virus (RSV) IN mutants complete with all three structural domains as well as its two-domain fragment in a new crystal form at an improved resolution. Combined with earlier structural studies, our results suggest that the RSV IN dimer consists of highly flexible N-terminal domains and a rigid entity formed by the catalytic and C-terminal domains stabilized by the well-conserved catalytic domain dimerization interaction. Biochemical and mutational analyses confirm earlier observations that the catalytic and the C-terminal domains of an RSV IN dimer efficiently integrates one viral DNA end into target DNA. We also show that the asymmetric dimeric interaction between the two C-terminal domains is important for viral DNA binding and subsequent catalysis, including concerted integration. We propose that the asymmetric C-terminal domain dimer serves as a viral DNA binding surface for RSV IN.

HIV-1 reverse transcription

Reverse transcription and integration are the defining features of the Retroviridae; the common name "retrovirus" derives from the fact that these viruses use a virally encoded enzyme, reverse transcriptase (RT), to convert their RNA genomes into DNA. Reverse transcription is an essential step in retroviral replication. This article presents an overview of reverse transcription, briefly describes the structure and function of RT, provides an introduction to some of the cellular and viral factors that can affect reverse transcription, and discusses fidelity and recombination, two processes in which reverse transcription plays an important role. In keeping with the theme of the collection, the emphasis is on HIV-1 and HIV-1 RT.

Resistance to integrase inhibitors

Integrase (IN) is a clinically validated target for the treatment of human immunodeficiency virus infections and raltegravir exhibits remarkable clinical activity. The next most advanced IN inhibitor is elvitegravir. However, mutant viruses lead to treatment failure and mutations within the IN coding sequence appear to confer cross-resistance. The characterization of those mutations is critical for the development of second generation IN inhibitors to overcome resistance. This review focuses on IN resistance based on structural and biochemical data, and on the role of the IN flexible loop i.e., between residues G140-G149 in drug action and resistance.

Study on the interactions between diketo-acid inhibitors and prototype foamy virus integrase-DNA complex via molecular docking and comparative molecular dynamics simulation methods

Human immunodeficiency virus type 1 (HIV-1) integrase (IN) is an important drug target for anti-acquired immune deficiency disease (AIDS) treatment and diketo-acid (DKA) inhibitors are potent and selective inhibitors of HIV-1 IN. Due to lack of three-dimensional structures including detail interactions between HIV-1 IN and its substrate viral DNA, the drug design and screening platform remains incompleteness and deficient. In addition, the action mechanism of DKA inhibitors with HIV-1 IN is not well understood. In view of the high homology between the structure of prototype foamy virus (PFV) IN and that of HIV-1 IN, we used PFV IN as a surrogate model for HIV-1 IN to investigate the inhibitory mechanism of raltegravir (RLV) and the binding modes with a series of DKA inhibitors. Firstly, molecular dynamics simulations of PFV IN, IN-RLV, IN-DNA, and IN-DNA-RLV systems were performed for 10 ns each. The interactions and inhibitory mechanism of RLV to PFV IN were explored through overall dynamics behaviors, catalytic loop conformation distribution, and hydrogen bond network analysis. The results show that the coordinated interactions of RLV with IN and viral DNA slightly reduce the flexibility of catalytic loop region of IN, and remarkably restrict the mobility of the CA end of viral DNA, which may lead to the partial loss of the inhibitory activity of IN. Then, we docked a series of DKA inhibitors into PFV IN-DNA receptor and obtained the IN-DNA-inhibitor complexes. The docking results between PFV IN-DNA and DKA inhibitors agree well with the corresponding complex of HIV-1 IN, which proves the dependability of PFV IN-DNA used for the anti-AIDS drug screening. Our study may help to make clear some theoretical questions and to design anti-AIDS drug based on the structure of IN.

In vitro targeting of strand transfer by the Ty3 retroelement integrase

The Saccharomyces cerevisiae long terminal repeat retrotransposon Ty3 integrates within one or two nucleotides of the transcription initiation sites of genes transcribed by RNA polymerase III. In this study the minimal components required to re-constitute position-specific strand transfer by Ty3 integrase are defined. Ty3 integrase targeted by a synthetic fusion of RNA polymerase III transcription factor IIIB subunits, Brf1 and TBP, mediated position-specific strand transfer of duplex oligonucleotides representing the ends of the Ty3 cDNA. These results further delimit the TFIIIB domains targeted by the Ty3 element and show that IN is the Ty3 component sufficient in vitro to target integration. These results underscore the commonality of protein interactions that mediate transcription and retrotransposon targeting. Surprisingly, in the presence of MnCl(2), strand transfer was TFIIIB-independent and targeted sequences resembling the Ty3 terminal inverted repeat.

Correlation of recombinant integrase activity and functional preintegration complex formation during acute infection by replication-defective integrase mutant human immunodeficiency virus

Previous studies characterized two types of replication-defective human immunodeficiency virus type 1 (HIV-1) integrase mutants: class I, which are specifically blocked at the integration step, and class II, which harbor additional virion production and/or reverse transcription defects. Class I mutant enzymes supported little if any metal ion-dependent 3'-processing and DNA strand transfer activities in vitro, whereas class II enzymes displayed partial or full catalytic function in studies with simplified assay designs, suggesting that defective interaction(s) with heterologous integrase binding proteins might underlie the class II mutant viral phenotype. To address this hypothesis, class I and II mutant enzymes were interrogated under expanded sets of in vitro conditions. The majority failed to catalyze the concerted integration of two viral DNA ends into target DNA, highlighting defective integrase function as the root cause of most class II in addition to all class I mutant virus infection defects. One mutant protein, K264E, in contrast, could support the wild-type level of concerted integration activity. After accounting for its inherent reverse transcription defect, HIV-1(K264E) moreover formed preintegration complexes that supported the efficient integration of endogenous viral DNA in vitro and normal levels and sequences of 2-long terminal repeat-containing circle junctions during acute infection. K264E integrase furthermore efficiently interacted in vitro with two heterologous binding partners, LEDGF/p75 and reverse transcriptase. Our results underscore the physiological relevance of concerted integration assays for tests of integrase mutant function and suggest that the K264E mutation disrupts an interaction with an intranuclear integrase binding partner that is important for HIV-1 integration.

Modulation of HIV-1 integrase activity by single-stranded oligonucleotides and their conjugates with eosin

Integration of the DNA copy of the genomic RNA into an infected cell genome is one of the key steps of the replication cycle of all retroviruses. It is catalyzed by the viral enzyme, integrase. We have shown that conjugates of short single-stranded oligonucleotides with eosin efficiently inhibit the catalytic activity of the HIV-1 integrase. In this article, we have found that the dependence of the integrase catalytic activity on the concentration of oligonucleotides has a bell-shaped pattern. The modulation of HIV-1 integrase activity correlated with the oligonucleotide length and was not associated with specific sequences. Moreover, a similar mode of the oligonucleotide action was found for integrase from the prototype foamy virus. This dual effect of the oligonucleotide and their conjugates with eosin might be explained by their binding with retroviral integrase in two different sites; the oligodeoxynucleotide binding in the first site results in integrase activation, whereas interactions with another one lead to inhibition of the enzyme activity. Eosin coupling to oligonucleotides did not change the mode of their action but enhanced their affinity to both binding sites. The affinity increase was found to be much more important for the site responsible for the integrase inhibition, thus explaining the high inhibitory potency of oligonucleotide-eosin conjugates.

Localization of ASV integrase-DNA contacts by site-directed crosslinking and their structural analysis

Background

We applied crosslinking techniques as a first step in preparation of stable avian sarcoma virus (ASV) integrase (IN)-DNA complexes for crystallographic investigations. These results were then compared with the crystal structures of the prototype foamy virus (PFV) intasome and with published data for other retroviral IN proteins.

Methodology/Results

Photoaffinity crosslinking and site-directed chemical crosslinking were used to localize the sites of contacts with DNA substrates on the surface of ASV IN. Sulfhydryl groups of cysteines engineered into ASV IN and amino-modified nucleotides in DNA substrates were used for attachment of photocrosslinkers. Analysis of photocrosslinking data revealed several specific DNA-protein contacts. To confirm contact sites, thiol-modified nucleotides were introduced into oligo-DNA substrates at suggested points of contact and chemically crosslinked to the cysteines via formation of disulfide bridges. Cysteines incorporated in positions 124 and 146 in the ASV IN core domain were shown to interact directly with host and viral portions of the Y-mer DNA substrate, respectively. Crosslinking of an R244C ASV IN derivative identified contacts at positions 11 and 12 on both strands of viral DNA. The most efficient disulfide crosslinking was observed for complexes of the ASV IN E157C and D64C derivatives with linear viral DNA substrate carrying a thiol-modified scissile phosphate.

Conclusion

Analysis of our crosslinking results as well as published results of retroviral IN protein from other laboratories shows good agreement with the structure of PFV IN and derived ASV, HIV, and MuLV models for the core domain, but only partial agreement for the N- and C-terminal domains. These differences might be explained by structural variations and evolutionary selection for residues at alternate positions to perform analogous functions, and by methodological differences: i.e., a static picture of a particular assembly from crystallography vs. a variety of interactions that might occur during formation of functional IN complexes in solution.

Soluble expression, purification and characterization of the full length IS2 Transposase

BACKGROUND

The two-step transposition pathway of insertion sequences of the IS3 family, and several other families, involves first the formation of a branched figure-of-eight (F-8) structure by an asymmetric single strand cleavage at one optional donor end and joining to the flanking host DNA near the target end. Its conversion to a double stranded minicircle precedes the second insertional step, where both ends function as donors. In IS2, the left end which lacks donor function in Step I acquires it in Step II. The assembly of two intrinsically different protein-DNA complexes in these F-8 generating elements has been intuitively proposed, but a barrier to testing this hypothesis has been the difficulty of isolating a full length, soluble and active transposase that creates fully formed synaptic complexes in vitro with protein bound to both binding and catalytic domains of the ends. We address here a solution to expressing, purifying and structurally analyzing such a protein.

RESULTS

A soluble and active IS2 transposase derivative with GFP fused to its C-terminus functions as efficiently as the native protein in in vivo transposition assays. In vitro electrophoretic mobility shift assay data show that the partially purified protein prepared under native conditions binds very efficiently to cognate DNA, utilizing both N- and C-terminal residues. As a precursor to biophysical analyses of these complexes, a fluorescence-based random mutagenesis protocol was developed that enabled a structure-function analysis of the protein with good resolution at the secondary structure level. The results extend previous structure-function work on IS3 family transposases, identifying the binding domain as a three helix H + HTH bundle and explaining the function of an atypical leucine zipper-like motif in IS2. In addition gain- and loss-of-function mutations in the catalytic active site define its role in regional and global binding and identify functional signatures that are common to the three dimensional catalytic core motif of the retroviral integrase superfamily.

CONCLUSIONS

Intractably insoluble transposases, such as the IS2 transposase, prepared by solubilization protocols are often refractory to whole protein structure-function studies. The results described here have validated the use of GFP-tagging and fluorescence-based random mutagenesis in overcoming this limitation at the secondary structure level.

Binding modes of diketo-acid inhibitors of HIV-1 integrase: a comparative molecular dynamics simulation study

HIV-1 integrase (IN) has become an attractive target since drug resistance against HIV-1 reverse transcriptase (RT) and protease (PR) has appeared. Diketo acid (DKA) inhibitors are potent and selective inhibitors of HIV-1 IN: however the action mechanism is not well understood. Here, to study the inhibition mechanism of DKAs we performed 10 ns comparative molecular dynamics simulations on HIV-1 IN bound with three most representative DKA inhibitors: Shionogi inhibitor, S-1360 and two Merck inhibitors L-731,988 and L-708,906. Our simulations show that the acidic part of S-1360 formed salt bridge and cation-π interactions with Lys159. In addition, the catalytic Glu152 in S-1360 was pushed away from the active site to form an ion-pair interaction with Arg199. The Merck inhibitors can maintain either one or both of these ion-pair interaction features. The difference in potencies of the DKA inhibitors is thus attributed to the different binding modes at the catalytic site. Such structural information at atomic level, not only demonstrates the action modes of DKA inhibitors but also provides a novel starting point for structural-based design of HIV-1 IN inhibitors.

HIVToolbox, an integrated web application for investigating HIV

Many bioinformatic databases and applications focus on a limited domain of knowledge federating links to information in other databases. This segregated data structure likely limits our ability to investigate and understand complex biological systems. To facilitate research, therefore, we have built HIVToolbox, which integrates much of the knowledge about HIV proteins and allows virologists and structural biologists to access sequence, structure, and functional relationships in an intuitive web application. HIV-1 integrase protein was used as a case study to show the utility of this application. We show how data integration facilitates identification of new questions and hypotheses much more rapid and convenient than current approaches using isolated repositories. Several new hypotheses for integrase were created as an example, and we experimentally confirmed a predicted CK2 phosphorylation site. Weblink: [http://hivtoolbox.bio-toolkit.com].

Sequential deletion of the integrase (Gag-Pol) carboxyl terminus reveals distinct phenotypic classes of defective HIV-1

A requisite step in the life cycle of human immunodeficiency virus type 1 (HIV-1) is the insertion of the viral genome into that of the host cell, a process catalyzed by the 288-amino-acid (32-kDa) viral integrase (IN). IN recognizes and cleaves the ends of reverse-transcribed viral DNA and directs its insertion into the chromosomal DNA of the target cell. IN function, however, is not limited to integration, as the protein is required for other aspects of viral replication, including assembly, virion maturation, and reverse transcription. Previous studies demonstrated that IN is comprised of three domains: the N-terminal domain (NTD), catalytic core domain (CCD), and C-terminal domain (CTD). Whereas the CCD is mainly responsible for providing the structural framework for catalysis, the roles of the other two domains remain enigmatic. This study aimed to elucidate the primary and subsidiary roles that the CTD has in protein function. To this end, we generated and tested a nested set of IN C-terminal deletion mutants in measurable assays of virologic function. We discovered that removal of up to 15 residues (IN 273) resulted in incremental diminution of enzymatic function and infectivity and that removal of the next three residues resulted in a loss of infectivity. However, replication competency was surprisingly reestablished with one further truncation, corresponding to IN 269 and coinciding with partial restoration of integration activity, but it was lost permanently for all truncations extending N terminal to this position. Our analyses of these replication-competent and -incompetent truncation mutants suggest potential roles for the IN CTD in precursor protein processing, reverse transcription, integration, and IN multimerization.

Structural insights into the retroviral DNA integration apparatus

Retroviral replication depends on successful integration of the viral genetic material into a host cell chromosome. Virally encoded integrase, an enzyme from the DDE(D) nucleotidyltransferase superfamily, is responsible for the key DNA cutting and joining steps associated with this process. Insights into the structural and mechanistic aspects of integration are directly relevant for the development of antiretroviral drugs. Recent breakthroughs have led to biochemical and structural characterization of the principal integration intermediates revealing the tetramer of integrase that catalyzes insertion of both 3' viral DNA ends into a sharply bent target DNA. This review discusses the mechanism of retroviral DNA integration and the mode of action of HIV-1 integrase strand transfer inhibitors in light of the recent visualization of the prototype foamy virus intasome, target DNA capture and strand transfer complexes.

A versatile and practical synthesis toward the development of novel HIV-1 integrase inhibitors

As a continuation of our previous work, which resulted in the identification of a new hit compound as an HIV-1 integrase inhibitor, three novel series of salicylic acid derivatives were synthesized using three versatile and practical synthetic strategies and were assayed for their capacity to inhibit the catalytic activity of HIV-1 integrase. Biological evaluations revealed that some of the synthesized compounds possess good inhibitory potency in enzymatic assays and are able to inhibit viral replication in MT-4 cells at low micromolar concentrations. Finally, docking studies were conducted to analyze the binding mode of the synthesized compounds within the DNA binding site of integrase in order to refine their structure-activity relationships.

Integration specificity of LTR-retrotransposons and retroviruses in the Drosophila melanogaster genome

Integration of DNA copies in a host genome is a necessary stage in the life cycle of retroviruses and LTR-retrotransposons. There is still no clear understanding of integration specificity of retroelements into a target site. The selection of the target DNA is believed to potentially affect a number of factors such as transcriptional status, association with histones and other DNA-binding proteins, and DNA bending. The authors performed a comprehensive computer analysis of the integration specificity of Drosophila melanogaster LTR-retrotransposons and retroviruses including an analysis of the nucleotide composition of targets, terminal sequences of LTRs, and integrase sequences. A classification of LTR-retrotransposons based on the integration specificity was developed. All the LTR-retrotransposons of the gypsy group with three open frames (errantiviruses) and their derivatives with two open frames demonstrate strict specificity to a target DNA selection. Such specificity correlates with the structural features of the target DNA: bendability, A-philicity, or protein-induced deformability. The remaining LTR-retrotransposons (copia and BEL groups, blastopia and 412 subgroups of the gypsy group) do not show specificity of integration. Chromodomain is present in the integrase structures of blastopia and 412 subgroup LTR-retrotransposons and may facilitate the process of non-specific integration.

HIV-1 Integrase Inhibitors: A Review of Their Chemical Development

Highly active antiretroviral therapy (HAART) significantly decreases plasma viral load, increases CD4+ T-cell counts in HIV-1-infected patients and has reduced progression to AIDS in developed countries. However, adverse side effects, and emergence of drug resistance, mean there is still a demand for new anti-HIV agents. The HIV integrase (IN) is a target that has been the focus of rational drug design over the past decade. In 2007, raltegravir was the first IN inhibitor approved by the US Food and Drug Administration for antiretroviral combination therapy, while another IN inhibitor, elvitegravir, is currently in Phase III clinical trials. This article reviews the development and resistance profiling of small molecule HIV-1 IN inhibitors.

The HIV-1 integrase α4-helix involved in LTR-DNA recognition is also a highly antigenic peptide element

Monoclonal antibodies (MAbas) constitute remarkable tools to analyze the relationship between the structure and the function of a protein. By immunizing a mouse with a 29mer peptide (K159) formed by residues 147 to 175 of the HIV-1 integrase (IN), we obtained a monoclonal antibody (MAba4) recognizing an epitope lying in the N-terminal portion of K159 (residues 147–166 of IN). The boundaries of the epitope were determined in ELISA assays using peptide truncation and amino acid substitutions. The epitope in K159 or as a free peptide (pep-a4) was mostly a random coil in solution, while in the CCD (catalytic core domain) crystal, the homologous segment displayed an amphipathic helix structure (α4-helix) at the protein surface. Despite this conformational difference, a strong antigenic crossreactivity was observed between pep-a4 and the protein segment, as well as K156, a stabilized analogue of pep-a4 constrained into helix by seven helicogenic mutations, most of them involving hydrophobic residues. We concluded that the epitope is freely accessible to the antibody inside the protein and that its recognition by the antibody is not influenced by the conformation of its backbone and the chemistry of amino acids submitted to helicogenic mutations. In contrast, the AA →Glu mutations of the hydrophilic residues Gln148, Lys156 and Lys159, known for their interactions with LTRs (long terminal repeats) and inhibitors (5

CITEP, for instance), significantly impaired the binding of K156 to the antibody. Moreover, we found that in competition ELISAs, the processed and unprocessed LTR oligonucleotides interfered with the binding of MAba4 to IN and K156, confirming that the IN α4-helix uses common residues to interact with the DNA target and the MAba4 antibody. This also explains why, in our standard in vitro concerted integration assays, MAba4 strongly impaired the IN enzymatic activity.