The quantitative molecular weight-antimicrobial activity relationship for chitosan polymers, oligomers, and derivatives

Chitosan and chitosan derivatives can kill pathogenic microorganisms including bacteria and fungi. The antimicrobial activity is dependent on the degree of acetylation, substituent structure, and molecular weight. Over the past four decades, numerous studies have endeavored to elucidate the relationship between molecular weight and the activity against microorganisms. However, investigators have reported divergent and, at times, conflicting conclusions. Here a bilinear equation is proposed, delineating the relationship between antimicrobial activity, defined as log (1/MIC), and the molecular weight of chitosan and chitosan derivatives. Three constants AMin, AMax, and CMW govern the shape of the curve determined by the equation. The constant AMin denotes the minimal activity expected as the molecular weight tends towards zero while AMax represents the maximal activity observed for molecular weights exceeding CMW, the critical molecular weight required for max activity. This equation was applied to analyze data from seven studies conducted between 1984 and 2019, which reported MIC (Minimum Inhibitory Concentration) values against bacteria and fungi for various molecular weights of chitosan and its derivatives. All the 29 datasets exhibited a good fit (R2 ≥ 0.5) and half excellent (R2 ≥ 0.95) fit to the equation. The CMW generally ranged from 4 to 10 KD for datasets with an excellent fit to the equation.

Montelukast and cefoperazone act as antiquorum sensing and antibiofilm agents against Pseudomonas aeruginosa

AIMS

Drug repurposing is an attractive strategy to control biofilm-related infectious diseases. In this study, two drugs (montelukast and cefoperazone) with well-established therapeutic applications were tested on Pseudomonas aeruginosa quorum sensing (QS) inhibition and biofilm control.

METHODS AND RESULTS

The activity of montelukast and cefoperazone was evaluated for Pqs signal inhibition, pyocyanin synthesis, and prevention and eradication of Ps. aeruginosa biofilms. Cefoperazone inhibited the Pqs system by hindering the production of the autoinducer molecules 2-heptyl-4-hydroxyquinoline (HHQ) and 2-heptyl-3-hydroxy-4(1H)-quinolone (the Pseudomonas quinolone signal or PQS), corroborating in silico results. Pseudomonas aeruginosa pyocyanin production was reduced by 50%. The combination of the antibiotics cefoperazone and ciprofloxacin was synergistic for Ps. aeruginosa biofilm control. On the other hand, montelukast had no relevant effects on the inhibition of the Pqs system and against Ps. aeruginosa biofilm.

CONCLUSION

This study provides for the first time strong evidence that cefoperazone interacts with the Pqs system, hindering the formation of the autoinducer molecules HHQ and PQS, reducing Ps. aeruginosa pathogenicity and virulence. Cefoperazone demonstrated a potential to be used in combination with less effective antibiotics (e.g. ciprofloxacin) to potentiate the biofilm control action.

Benzalkonium chloride disinfectant residues stimulate biofilm formation and increase survival of Vibrio bacterial pathogens

Vibrio spp. are opportunistic human and animal pathogens found ubiquitously in marine environments. Globally, there is a predicted rise in the prevalence of Vibrio spp. due to increasing ocean temperatures, which carries significant implications for public health and the seafood industry. Consequently, there is an urgent need for enhanced strategies to control Vibrio spp. and prevent contamination, particularly in aquaculture and seafood processing facilities. Presently, these industries employ various disinfectants, including benzalkonium chloride (BAC), as part of their management strategies. While higher concentrations of BAC may be effective against these pathogens, inadequate rinsing post-disinfection could result in residual concentrations of BAC in the surrounding environment. This study aimed to investigate the adaptation and survival of Vibrio spp. exposed to varying concentrations of BAC residues. Results revealed that Vibrio bacteria, when exposed, exhibited a phenotypic adaptation characterized by an increase in biofilm biomass. Importantly, this effect was found to be strain-specific rather than species-specific. Exposure to BAC residues induced physiological changes in Vibrio biofilms, leading to an increase in the number of injured and alive cells within the biofilm. The exact nature of the "injured" bacteria remains unclear, but it is postulated that BAC might heighten the risk of viable but non-culturable (VBNC) bacteria development. These VBNC bacteria pose a significant threat, especially since they cannot be detected using the standard culture-based methods commonly employed for microbiological risk assessment in aquaculture and seafood industries. The undetected presence of VBNC bacteria could result in recurrent contamination events and subsequent disease outbreaks. This study provides evidence regarding the role of c-di-GMP signaling pathways in Vibrio adaptation mechanisms and suggests that c-di-GMP mediated repression is a potential avenue for further research. The findings underscore that the misuse and overuse of BAC may increase the risk of biofilm development and bacterial survival within the seafood processing chain.

Furan-based Chalcone Annihilates the Multi-Drug-Resistant Pseudomonas aeruginosa and Protects Zebra Fish Against its Infection

The emergence of carbapenem-resistant Pseudomonas aeruginosa, a multi-drug-resistant bacteria, is becoming a serious public health concern. This bacterium infects immunocompromised patients and has a high fatality rate. Both naturally and synthetically produced chalcones are known to have a wide array of biological activities. The antibacterial properties of synthetically produced chalcone were studied against P. aeruginosa. In vitro, study of the compound (chalcone derivative named DKO1), also known as (2E)-1-(5-methylfuran-2-yl)-3-(4-nitrophenyl) prop-2-en-1-one, had substantial antibacterial and biofilm disruptive action. DKO1 effectively shielded against P. aeruginosa-induced inflammation, oxidative stress, lipid peroxidation, and apoptosis in zebrafish larvae. In adult zebrafish, the treatment enhanced the chances of survivability and reduced the sickness-like behaviors. Gene expression, biochemical analysis, and histopathology studies found that proinflammatory cytokines (TNF-α, IL-1β, IL-6, iNOS) were down regulated; antioxidant enzymes such as superoxide dismutase (SOD) and catalase (CAT) levels increased, and histoarchitecture was restored in zebrafish. The data indicate that DKO1 is an effective antibacterial agent against P. aeruginosa demonstrated both in vitro and in vivo.

Toxicity of the disinfectant benzalkonium chloride (C14) towards cyanobacterium Microcystis results from its impact on the photosynthetic apparatus and cell metabolism

Quaternary ammonium compounds (QACs) are commonly used in a variety of consumer and commercial products, typically as a component of disinfectants. During the COVID-19 pandemic, QACs became one of the primary agents utilized to inactivate the SARS-CoV-2 virus on surfaces. However, the ecotoxicological effects of QACs upon aquatic organisms have not been fully assessed. In this study, we examined the effects of a widely used QAC (benzalkonium chloride-C14, BAC-14) on two toxigenic Microcystis strains and one non-toxigenic freshwater Microcystis strain and carried out an analysis focused on primary, adaptive and compensatory stress responses at apical (growth and photosynthesis) and metabolic levels. This analysis revealed that the two toxic Microcystis strains were more tolerant than the non-toxic strain, with 96 hr-EC50 values of 0.70, 0.76, and 0.38 mg/L BAC-14 for toxigenic M. aeruginosa FACHB-905, toxigenic M. aeruginosa FACHB-469, and non-toxigenic M. wesenbergii FACHB-908, respectively. The photosynthetic activities of the Microcystis, assessed via Fv/Fm values, were significantly suppressed under 0.4 mg/L BAC-14. Furthermore, this analysis revealed that BAC-14 altered 14, 12, and 8 metabolic pathways in M. aeruginosa FACHB-905, M. aeruginosa FACHB-469, and M. wesenbergii FACHB-908, respectively. It is noteworthy that BAC-14 enhanced the level of extracellular microcystin production in the toxigenic Microcystis strains, although cell growth was not significantly affected. Collectively, these data show that BAC-14 disrupted the physiological and metabolic status of Microcystis cells and stimulated the production and release of microcystin, which could result in damage to aquatic systems.

Exposure of Salmonella enterica serovar 1,4,[5],12:i:- to benzalkonium chloride leads to acquired resistance to this disinfectant and antibiotics

AIMS

Disinfectants such as benzalkonium chloride (BC), extensively used in animal farms and food-processing industries, contribute to the development of adaptive and cross-resistance in foodborne pathogens, posing a serious threat to food safety and human health. The purpose of this study is to explore whether continuous exposure of Salmonella enterica serovar 1,4,[5],12:i:- (S. 1,4,[5],12:i:-) to sublethal concentrations of BC could result in acquired resistance to this agent and other environmental stresses (e.g. antibiotics, heat, and acid).

METHODS AND RESULTS

BC tolerance increased in all tested strains after exposure to gradually increasing concentrations of BC, with increases in minimum inhibitory concentrations between two and sixfold. The survival rate of BC-adapted strains was significantly (P < 0.05) higher than that of their wild-type (non-adapted) counterparts in lethal concentrations of BC. In addition, significant reductions (P < 0.05) in zeta potential were observed in BC-adapted strains compared to wild-type ones, indicating that a reduction in cell surface charge was a cause of adaptative resistance. More importantly, two BC-adapted strains exhibited increased antibiotic resistance to levofloxacin, ceftazidime, and tigecycline, while gene mutations (gyrA, parC) and antibiotic efflux-related genes (acrB, mdsA, mdsB) were detected by genomic sequencing analysis. Moreover, the tolerance of BC-adapted strains to heat (50, 55, and 60°C) and acid (pH 2.0, 2.5) was strain-dependent and condition-dependent.

CONCLUSIONS

Repeated exposure to sublethal concentrations of BC could result in the emergence of BC- and antibiotic-resistant S. 1,4,[5],12:i:- strains.

Impact of parabens on drinking water bacteria and their biofilms: The role of exposure time and substrate materials

Parabens have been detected in drinking water (DW) worldwide, however, their impact on DW microbial communities remains to be explored. Microorganisms can easily adapt to environmental changes. Therefore, their exposure to contaminants of emerging concern, particularly parabens, in DW distribution systems (DWDS) may affect the microbiological quality and safety of the DW reaching the consumers tap. This work provides a pioneer evaluation of the effects of methylparaben (MP), propylparaben (PP), butylparaben (BP), and their combination (MIX), in bacterial biofilms formed on different surfaces, representative of DWDS materials - high-density polyethylene (HDPE), polypropylene (PPL) and polyvinyl chloride (PVC). Acinetobacter calcoaceticus and Stenotrophomonas maltophilia, isolated from DW, were used to form single and dual-species biofilms on the surface materials selected. The exposure to MP for 7 days caused the most significant effects on biofilms, by increasing their cellular culturability, density, and thickness up to 233%, 150%, and 224%, respectively, in comparison to non-exposed biofilms. Overall, more pronounced alterations were detected for single biofilms than for dual-species biofilms when HDPE and PPL, demonstrating that the surface material used affected the action of parabens on biofilms. Swimming motility and the production of virulence factors (protease and gelatinase) by S. maltophilia were increased up to 141%, 41%, and 73%, respectively, when exposed to MP for 7 days. The overall results highlight the potential of parabens to interfere with DW bacteria in planktonic state and biofilms, and compromise the DW microbiological quality and safety.

Synergistic Antibacterial Activity of Benzalkonium Bromide and Cu-Bearing Duplex Stainless Steel against Pseudomonas aeruginosa

The bactericide benzalkonium bromide is widely used to kill Pseudomonas aeruginosa, which causes microbiologically influenced corrosion (MIC). However, the extensive use of benzalkonium bromide will enhance bacterial drug resistance and cause environmental pollution. In this study, benzalkonium bromide combined with Cu-bearing 2205 duplex stainless steel (2205-Cu DSS) was used to kill Pseudomonas aeruginosa; the germicidal rate of the combination of benzalkonium bromide and 2205-Cu DSS was 24.2% higher than that of using benzalkonium bromide alone, after five days. The antibacterial efficacy was evaluated using an antibacterial test and biofilm observation. The results showed that, in the presence of P. aeruginosa, the combination of 23.44 ppm benzalkonium bromide and 2205-Cu DSS showed the best antibacterial efficacy.

Quaternary ammonium compounds of emerging concern: Classification, occurrence, fate, toxicity and antimicrobial resistance

Amplified hygiene and precautionary measures are of utmost importance to control the spread of COVID-19 and future infection; however, these changes in practice are projected to trigger a rise in the purchase, utilisation and hence, discharge of many disinfectants into the environment. While alcohol-based, hydrogen peroxide-based, and chlorine-based compounds have been used widely, quaternary ammonium compounds (QACs) based disinfectants are of significant concern due to their overuse during this pandemic. This review presents the classification of disinfectants and their mechanism of action, focusing on QACs. Most importantly, the occurrence, fate, toxicity and antimicrobial resistance due to QACs are covered in this paper. Here we collated evidence from multiple studies and found rising trends of concern, including an increase in the mass load of QACs at a wastewater treatment plant (WWTP) by 331% compared to before the COVID-19 pandemic, as well as an increases in the concentration of 62% in residential dust, resulting in high concentrations of QACs in human blood and breast milk and suggesting that these could be potential sources of persistent QACs in infants. In addition to increased toxicity to human and aquatic life, increased use of QACs and accelerated use of antibiotics and antimicrobials during the COVID-19 pandemic could multiply the threat to antimicrobial resistance.

Priming with biocides: a pathway to antibiotic resistance?

AIMS

To investigate the priming effects of sub-inhibitory concentrations of biocides on antibiotic resistance in bacteria.

METHODS AND RESULTS

Escherichia coli, Pseudomonas aeruginosa and Staphylococcus aureus were exposed to sub-inhibitory concentrations of biocides via a gradient plate method. Minimum inhibitory concentration (MIC) and antibiotic susceptibility were determined, and efflux pump inhibitors (thioridazine and chlorpromazine) were used to investigate antibiotic resistance mechanism(s). Escherichia coli displayed a 2-fold increase in MIC (32 to 64 mg l-1) to H₂ O₂ which was stable after 15 passages, but lost after 6 weeks, and P. aeruginosa displayed a 2-fold increase in MIC (64 to 128 mg l-1) to BZK which was also stable for 15 passages. There were no other tolerances observed to biocides in E. coli, P. aeruginosa or S. aureus, however stable cross-resistance to antibiotics was observed in the absence of a stable increased tolerance to biocides. Six-fold increases in MIC to cephalothin and four-fold to ceftriaxone and ampicillin were observed in hydrogen peroxide primed E. coli. Chlorhexidine primed S. aureus showed a four-fold increase in MIC to oxacillin, and glutaraldehyde-primed P. aeruginosa showed four-fold (sulphatriad) and eight-fold (ciprofloxacin) increases in MIC. Thioridazine increased the susceptibility of E. coli to cephalothin and cefoxitin by four and two-fold respectively, and both thioridazine and chlorpromazine increased the susceptibility S. aureus to oxacillin by eight and four-fold respectively.

CONCLUSIONS

These findings demonstrate that sub-inhibitory concentrations of biocides can prime bacteria to become resistant to antibiotics even in the absence of stable biocide tolerance and suggests activation of efflux mechanisms may be a contributory factor.

SIGNIFICANCE AND IMPACT OF THE STUDY

This study demonstrates the effects of low-level exposure of biocides (priming) on antibiotic resistance even in the absence of obvious increased biocidal tolerance.

A Multi-Purpose Approach to the Mechanisms of Action of Two Biocides (Benzalkonium Chloride and Dibromonitrilopropionamide): Discussion of Pseudomonas fluorescens’ Viability and Death

Biocides are widely used in water treatment for microbiological control. The rise of antimicrobial resistance and the need to assure properly managed water systems require a better understanding of the mechanisms of action of biocides and of their impact on cell’s viability as a function of dosage concentrations. The present work addresses these two aspects regarding the biocides benzalkonium chloride (BAC) and dibromonitrilopropionamide (DBNPA)—two biocides commonly found in the water treatment industry. For that, the following parameters were studied: culturability, membrane integrity, metabolic activity, cellular energy, and the structure and morphology of cells. Also, to assess cell’s death, a reliable positive control, consisting of cells killed by autoclave (dead cells), was introduced. The results confirmed that BAC is a lytic biocide and DBNPA a moderate electrophilic one. Furthermore, the comparison between cells exposed to the biocides’ minimum bactericidal concentrations (MBCs) and autoclaved cells revealed that other viability parameters should be taken into consideration as “death indicators.” The present work also shows that only for the concentrations above the MBC the viability indicators reached values statistically similar to the ones observed for the autoclaved cells (considered to be definitively dead). Finally, the importance of considering the biocide mechanism of action in the definition of the viability parameter to use in the viable but non-culturable (VBNC) determination is discussed.

Antibacterial mechanism of linalool emulsion against Pseudomonas aeruginosa and its application to cold fresh beef

Pseudomonas aeruginosa (P. aeruginosa) is the dominant spoilage bacterium in cold fresh beef. The current strategy is undertaken to overcome the low water solubility of linalool by encapsulating linalool into emulsions. The results of field emission scanning electron microscopy and particle size distribution revealed that the appearance of the bacterial cells was severely disrupted after exposure to linalool emulsion (LE) with an minimum inhibitory concentration (MIC) of 1.5 mL/L. Probes combined with fluorescence spectroscopy were performed to detect cell membrane permeability, while intracellular components (protein and ion leakage) and crystal violet staining were further measured to characterize cell membrane integrity and biofilm formation ability. The results confirmed that LE could destroy the structure of the cell membrane, thereby leading to the leakage of intracellular material and effective removal of biofilms. Molecular docking confirmed that LE can interact with the flagellar cap protein (FliD) and DNA of P. aeruginosa, inhibiting biofilm formation and causing genetic damage. Furthermore, the results of respiratory metabolism and reactive oxygen species (ROS) accumulation revealed that LE could significantly inhibit the metabolic activity of P. aeruginosa and induce oxidative stress. In particular, the inhibition rate of LE on P. aeruginosa was 23.03% and inhibited mainly the tricarboxylic acid cycle (TCA). Finally, LE was applied to preserve cold fresh beef, and the results showed that LE could effectively inhibit the activity of P. aeruginosa and delay the quality change of cold fresh beef during the storage period. These results are of great significance to developing natural preservatives and extending the shelf life of cold fresh beef.

Reduced Susceptibility and Increased Resistance of Bacteria against Disinfectants: A Systematic Review

Disinfectants are used to reduce the concentration of pathogenic microorganisms to a safe level and help to prevent the transmission of infectious diseases. However, bacteria have a tremendous ability to respond to chemical stress caused by biocides, where overuse and improper use of disinfectants can be reflected in a reduced susceptibility of microorganisms. This review aims to describe whether mutations and thus decreased susceptibility to disinfectants occur in bacteria during disinfectant exposure. A systematic literature review following PRISMA guidelines was conducted with the databases PubMed, Science Direct and Web of Science. For the final analysis, 28 sources that remained of interest were included. Articles describing reduced susceptibility or the resistance of bacteria against seven different disinfectants were identified. The important deviation of the minimum inhibitory concentration was observed in multiple studies for disinfectants based on triclosan and chlorhexidine. A reduced susceptibility to disinfectants and potentially related problems with antibiotic resistance in clinically important bacterial strains are increasing. Since the use of disinfectants in the community is rising, it is clear that reasonable use of available and effective disinfectants is needed. It is necessary to develop and adopt strategies to control disinfectant resistance.

Antimicrobial and Anticorrosion Activity of a Novel Composite Biocide against Mixed Bacterial Strains in Taiwanese Marine Environments

Taiwan is an island with a humid subtropical climate. The relatively warm seawater results in biofouling of the surfaces of marine facilities. Biocide application is a common practice for combating and eliminating adhesive fouling. However, a single type of biocide may have limited antimicrobial effects due to the relatively high microbial diversity in marine environments. Therefore, applying a mixture of various biocides may be necessary. In this study, the antimicrobial and anticorrosion properties of a newly designed composite biocide, namely a combination of thymol and benzyldimethyldodecylammonium chloride, were investigated by applying the biocide to 304 stainless steel substrates immersed in inocula containing bacterial strains from Tamsui and Zuoying harbors. The ability of 3TB and 5TB treatments to prevent sessile cells and biofilm formation on the 304 stainless steel coupon surface was determined through scanning electron microscopy investigation. In addition, confocal laser scanning microscopy indicated that the 5TB treatment achieved a greater bactericidal effect in both the Tamsui and Zuoying inocula. Moreover, electrochemical impedance spectroscopy revealed that the diameter of the Nyquist semicircle was almost completely unaffected by Tamsui or Zuoying under the 5TB treatment. Through these assessments of antimicrobial activity and corrosion resistance, 5TB treatment was demonstrated to have superior bactericidal activity against mixed strains in both southern and northern Taiwanese marine environments.

ANTIMICROBIAL AGENTS AND ANTI-ADHESION MATERIALS FOR MEDICAL AND SURGICAL GLOVES

Healthcare-associated infections (HAIs) can be common in healthcare settings, such as the intensive care unit and surgical sites, if proper precautions are not followed. Although traditional techniques are encouraged, such as educating the public and healthcare workers to practice proper handwashing or to double glove, they have not been fully effective in combating HAIs. The use of surface-modified antimicrobial gloves may be an alternative approach to prevent the transmission of pathogens between healthcare workers and patients. This paper gives a comprehensive review of strategies to produce antimicrobial gloves. The chemistry of some potential chemically synthesized antimicrobial agents and nature-inspired superhydrophobic surfaces are discussed. The principles of killing microbes must be understood to effectively select these materials and to design and fabricate surfaces for the reduction of bacterial adhesion. Also, current company trends and technologies are presented for gloves proven to effectively kill bacteria. Such glove use, when coupled with in-depth research on diverse surgical procedures and medical examinations, could ease the burden of HAIs.

New Functionalized Macroparticles for Environmentally Sustainable Biofilm Control in Water Systems

Reverse osmosis (RO) depends on biocidal agents to control the operating costs associated to biofouling, although this implies the discharge of undesired chemicals into the aquatic environment. Therefore, a system providing pre-treated water free of biocides arises as an interesting solution to minimize the discharge of chemicals while enhancing RO filtration performance by inactivating bacteria that could form biofilms on the membrane system. This work proposes a pretreatment approach based on the immobilization of an industrially used antimicrobial agent (benzalkonium chloride—BAC) into millimetric aluminum oxide particles with prior surface activation with DA—dopamine. The antimicrobial efficacy of the functionalized particles was assessed against Escherichia coli planktonic cells through culturability and cell membrane integrity analysis. The results showed total inactivation of bacterial cells within five min for the highest particle concentration and 100% of cell membrane damage after 15 min for all concentrations. When reusing the same particles, a higher contact time was needed to reach the total inactivation, possibly due to partial blocking of immobilized biocide by dead bacteria adhering to the particles and to the residual leaching of biocide. The overall results support the use of Al₂O₃-DA-BAC particles as antimicrobial agents for sustainable biocidal applications in continuous water treatment systems.

Efficacy and Mechanism of Ultrasound Combined with Slightly Acidic Electrolyzed Water for Inactivating Escherichia coli

In the present study, the synergetic effect and mechanism of ultrasound (US) and slightly acidic electrolyzed water (SAEW) on the inactivation of Escherichia coli (E. coli) were evaluated. The results showed that US combined with SAEW treatment showed higher sanitizing efficacy for reducing E. coli than US and SAEW alone treatment. US and US combined with SAEW treatments resulted in smaller particle size of E. coli compared to the control and SAEW treatment. In addition, US combined with SAEW treatment induced the highest potassium leakage. However, the highest protein leakage was recorded in US treatment. Moreover, scanning and transmission electron microscopy analysis revealed that the greatest damage of the appearance and ultrastructure of E. coli was achieved after US combined with SAEW treatment. The synergetic effect was also confirmed by CLSM analysis. Fluorescence spectroscopy suggested that treatments of US, SAEW, and US combined with SAEW changed protein conformation of E. coli. Overall, the present study demonstrated that the sterilization mechanism of US combined with SAEW treatment was decreasing the particle size and disrupting the permeability of cell membrane and the cytoplasmic ultrastructure as well as changing protein conformation of E. coli.

Kinetics and distribution of benzalkonium compounds with different alkyl chain length following intravenous administration in rats

Benzalkonium chloride is widely used in disinfectants. Several toxicological and fatal cases have been reported; however, little is known about its kinetics and distribution. We investigated the kinetic characteristics and distribution of benzalkonium cation (BZK) based on the length of the alkyl chains C12, C14, and C16. Rats were treated intravenously with BZK solution (dose, 13.9 mg/kg) containing equal amounts of the three homologues. Kinetic parameters in the blood were assessed, and BZK distribution in the blood and tissues was examined both in rapid intravenous (IV) and drip intravenous (DIV) administrations. BZK concentrations were analysed by liquid chromatography-tandem mass spectrometry (LC-MS/MS). BZK with longer alkyl chains showed lower elimination tendencies and remained in the blood for a longer duration. Concentrations of BZK were higher in the heart, lung, spleen, and kidney than those in the blood, and lower in the brain and fat. In both the IV and DIV groups, the lung, liver, spleen, and fat samples showed higher concentrations of the longer alkyl chains (BZK-C12 < -C14 < -C16), and the opposite trend was observed in the kidney (BZK-C16 < -C14 < -C12). Only the heart and muscle samples displayed the homologues in ratios comparable to the original administered solutions. Differences between IV and DIV groups could be identified by comparing concentrations of BZK homologues in the heart, lung, spleen, and kidney samples. We found that the kinetics and distribution of BZK were influenced by the alkyl chain length, and analysing each BZK homologues in blood and tissue samples may provide useful information.

Combining Miconazole and Domiphen Bromide Results in Excess of Reactive Oxygen Species and Killing of Biofilm Cells

Fungal biofilm-related infections are increasingly occurring. We previously identified a fungicidal antibiofilm combination, consisting of miconazole (MCZ) and the quaternary ammonium compound domiphen bromide (DB). DB eliminates tolerance rather than altering the susceptibility to MCZ of various Candida spp. Here we studied the mode of action of the MCZ-DB combination in more detail. We found that DB's action increases the permeability of the plasma membrane as well as that of the vacuolar membrane of Candida spp. Furthermore, the addition of DB affects the intracellular azole distribution. MCZ is a fungicidal azole that, apart from its well-known inhibition of ergosterol biosynthesis, also induces accumulation of reactive oxygen species (ROS). Interestingly, the MCZ-DB combination induced significantly more ROS in C. albicans biofilms as compared to single compound treatment. Co-administration of the antioxidant ascorbic acid resulted in abolishment of the ROS generated by MCZ-DB combination as well as its fungicidal action. In conclusion, increased intracellular MCZ availability due to DB's action results in excess of ROS and enhanced fungal cell killing.

Development of a Benzalkonium Chloride Based Antibacterial Paper for Health and Food Applications

Pathogenic bacteria and other microorganisms pose a potent threat to humans by causing various infectious diseases. To control the spread of infection, different antibacterial products have been developed. However, most of them are known to be associated with health hazards, environmental pollution, complex fabrication, and/or higher cost. To address these issues, in this study, a low cost, biodegradable and human skin compatible antibacterial paper has been developed. A quaternary ammonium compound, benzalkonium chloride (BKC) has been used for paper surface treatment. The concentration of aqueous solution of BKC coated on paper was varied from 0.1 wt% to 0.2 wt%. No external binder was required for coating BKC onto paper. The efficacy of the coated paper was investigated against Staphylococcus aureus ATCC 6538 and Escherichia coli ATCC 8739 bacterial strains. This antibacterial paper is highly effective against both strains with the concentrations of BKC being within the allowable limit for cytotoxic effects. The optimum concentration of BKC coated on paper can be considered as 0.15 wt%, as nearly 100% inhibition was achieved with it against both strains. The developed antibacterial paper is suitable for being used in the industry for disinfection and food packaging purposes, and also by the public for hand sanitization.

Applications of Chemically Modified Clay Minerals and Clays to Water Purification and Slow Release Formulations of Herbicides

This review deals with modification of montmorillonite and other clay-minerals and clays by interacting them with organic cations, for producing slow release formulations of herbicides, and efficient removal of pollutants from water by filtration. Elaboration is on incorporating initially the organic cations in micelles and liposomes, then producing complexes denoted micelle- or liposome-clay nano-particles. The material characteristics (XRD, Freeze-fracture electron microscopy, adsorption) of the micelle– or liposome–clay complexes are different from those of a complex of the same composition (organo-clay), which is formed by interaction of monomers of the surfactant with the clay-mineral, or clay. The resulting complexes have a large surface area per weight; they include large hydrophobic parts and (in many cases) have excess of a positive charge. The organo-clays formed by preadsorbing organic cations with long alkyl chains were also addressed for adsorption and slow release of herbicides. Another examined approach includes “adsorptive” clays modified by small quaternary cations, in which the adsorbed organic cation may open the clay layers, and consequently yield a high exposure of the siloxane surface for adsorption of organic compounds. Small scale and field experiments demonstrated that slow release formulations of herbicides prepared by the new complexes enabled reduced contamination of ground water due to leaching, and exhibited enhanced herbicidal activity. Pollutants removed efficiently from water by the new complexes include (i) hydrophobic and anionic organic molecules, such as herbicides, dissolved organic matter; pharmaceuticals, such as antibiotics and non-steroidal drugs; (ii) inorganic anions, e.g., perchlorate and (iii) microorganisms, such as bacteria, including cyanobacteria (and their toxins). Model calculations of adsorption and kinetics of filtration, and estimation of capacities accompany the survey of results and their discussion.

Membrane Biofouling Control by Surface Modification of Quaternary Ammonium Compound Using Atom-Transfer Radical-Polymerization Method with Silica Nanoparticle as Interlayer

A facile approach to fabricate antibiofouling membrane was developed by grafting quaternary ammonium compounds (QACs) onto polyvinylidene fluoride (PVDF) membrane via surface-initiated activators regenerated by electron transfer atom-transfer radical-polymerization (ARGET ATRP) method. During the modification process, a hydrophilic silica nanoparticle layer was also immobilized onto the membrane surface as an interlayer through silicification reaction for QAC grafting, which imparted the membrane with favorable surface properties (e.g., hydrophilic and negatively charged surface). The QAC-modified membrane (MQ) showed significantly improved hydrophilicity and permeability mainly due to the introduction of silica nanoparticles and exposure of hydrophilic quaternary ammonium groups instead of long alkyl chains. Furthermore, the coverage of QAC onto membrane surface enabled MQ membrane to have clear antibacterial effect, with an inhibition rate ~99.9% of Escherichia coli (Gram-negative) and Staphylococcus aureus (Gram-positive), respectively. According to the batch filtration test, MQ had better antibiofouling performance compared to the control membrane, which was ascribed to enhanced hydrophilicity and antibacterial activity. Furthermore, the MQ membrane also exhibited impressive stability of QAC upon suffering repeated fouling–cleaning tests. The modification protocols provide a new robust way to fabricate high-performance antibiofouling QAC-based membranes for wastewater treatment.

Antimicrobial Nanogels with Nanoinjection Capabilities for Delivery of the Hydrophobic Antibacterial Agent Triclosan

With the ever-growing problem of antibiotic resistance, developing antimicrobial strategies is urgently needed. Herein, a hydrophobic drug delivery nanocarrier is developed for combating planktonic bacteria that enhances the efficiency of the hydrophobic antimicrobial agent, Triclosan, up to a 1000 times. The poly(N-isopropylacrylamide-co-N-[3-(dimethylamino)propyl]methacrylamide), p(NIPAM-co-DMAPMA), based nanogel is prepared via a one-pot precipitation polymerization, followed by quaternization with 1-bromododecane to form hydrophobic domains inside the nanogel network through intraparticle self-assembly of the aliphatic chains (C12). Triclosan, as the model hydrophobic antimicrobial drug, is loaded within the hydrophobic domains inside the nanogel. The nanogel can adhere to the bacterial cell wall via electrostatic interactions and induce membrane destruction via the insertion of the aliphatic chains into the cell membrane. The hydrophobic antimicrobial Triclosan can be actively injected into the cell through the destroyed membrane. This approach dramatically increases the effective concentration of Triclosan at the bacterial site. Both the minimal inhibitory concentration and minimal bactericidal concentration against the Gram-positive bacteria S. aureus and S. epidermidis decreased 3 orders of magnitude, compared to free Triclosan. The synergy of physical destruction and active nanoinjection significantly enhances the antimicrobial efficacy, and the designed nanoinjection delivery system holds great promise for combating antimicrobial resistance as well as the applications of hydrophobic drugs delivery for many other possible applications.

Elucidating Antibacterial Activity and Mechanism of Daphnetin against Pseudomonas fluorescens and Shewanella putrefaciens

In this research, the antibacterial activity and mechanism of daphnetin against Pseudomonas fluorescens and Shewanella putrefaciens were evaluated. The minimum inhibitory concentration (MIC) of daphnetin on P. fluorescens and S. putrefaciens was 0.16 and 0.08 mg·mL−1, respectively. The growth curve test also showed that daphnetin had a good antibacterial effect. The results of intracellular component leakage and cell viability analysis illustrated that daphnetin destroyed the morphology of the cell membrane. According to scanning electron microscope and transmission electron microscope observations, the treated bacterial cells displayed obvious morphological and ultrastructural changes in the cell membrane of the two tested strains, whichconfirmed daphnetin’s damage to the integrity of the cell membrane. The findings indicated that daphnetin mainly exerted its antibacterial effect by destroying the membrane and suggested that it had good potential to be as a natural food preservative.

Combination of Miconazole and Domiphen Bromide Is Fungicidal against Biofilms of Resistant Candida spp

The occurrence and recurrence of mucosal biofilm-related Candida infections, such as oral and vulvovaginal candidiasis, are serious clinical issues. Vaginal infections caused by Candida spp., for example, affect 70 to 75% of women at least once during their lives. Miconazole (MCZ) is the preferred topical treatment against these fungal infections, yet it has only moderate antibiofilm activity. Through screening of a drug-repurposing library, we identified the quaternary ammonium compound domiphen bromide (DB) as an MCZ potentiator against Candida biofilms. DB displayed synergistic anti-Candida albicans biofilm activity with MCZ, reducing the number of viable biofilm cells 1,000-fold. In addition, the MCZ-DB combination also resulted in significant killing of biofilm cells of azole-resistant C. albicans, C. glabrata, and C. auris isolates. In vivo, the MCZ-DB combination had significantly improved activity in a vulvovaginal candidiasis rat model compared to that of single-compound treatments. Data from an artificial evolution experiment indicated that the development of resistance against the combination did not occur, highlighting the potential of MCZ-DB combination therapy to treat Candida biofilm-related infections.

Smectite clay minerals reduce the acute toxicity of quaternary alkylammonium compounds towards potentially pathogenic bacterial taxa present in manure and soil

Quaternary alkylammonium compounds (QAACs) are a group of cationic surfactants which are disinfectants with numerous industrial and agricultural applications and frequently released into the environment. One recent hypothesis is that bacteria present in soil will be protected from acute toxic effects of QAACs in the presence of expandable layer silicates due to interlayer sorption. We therefore studied bacterial growth kinetics with high temporal resolution and determined minimal inhibitory concentrations (MICs) of two QAACs, benzyldimethyldodecylammonium chloride (BAC-C12) and didecyldimethylammonium chlorid (DADMAC-C10), for eight strains of different bacterial taxa (Escherichia coli, Acinetobacter, Enterococcus faecium, Enterococcus faecalis, and Pseudomonas fluorescens) in relation to QAAC sorption to smectite and kaolinite. The MICs of BAC-C12 and DADMAC-C10 were in the absence of smectite and kaolinite in the order of 10 to 30 µg mL⁻¹ and 1.0 to 3.5 µg mL⁻¹ for all strains except the more sensitive Acinetobacter strain. For all tested strains and both tested QAACs, the presence of smectite increased apparent MIC values while kaolinite had no effect on MICs. Sorption curves without bacteria showed that smectite sorbed larger amounts of QAACs than kaolinite. Correcting nominal QAAC concentrations employed in toxicity tests for QAAC sorption using the sorption curves explained well the observed shifts in apparent MICs. Transmission electron microscopy (TEM) demonstrated that the interlayer space of smectite expanded from 13.7 ± 1 Å to 19.9 ± 1.5 Å after addition of BAC-C12. This study provides first evidence that low charge 2:1 expandable layer silicates can play an important role for buffering QAAC toxicity in soils.

Rifampicin loaded in alginate/chitosan nanoparticles as a promising pulmonary carrier against Staphylococcus aureus

This study aims to explore the antimicrobial activity of rifampicin (RIF) and ascorbic acid (ASC) co-loaded into alginate (ALG)/chitosan (CS) nanoparticles (RIF/ASC NPs) and tested for their antibacterial activity against several strains of methicillin-sensitive Staphylococcus aureus (MSSA) and methicillin-resistant Staphylococcus aureus (MRSA). Also, the present research focused on exploring the possible antibacterial mechanism of action of these RIF/ASC NPs, which demonstrated a significant biocide activity against the S. aureus strains with minimum inhibitory concentrations (MIC) between 2- and 8-fold lower than those one exhibited with the free antibiotic RIF. The proposed antimicrobial mechanism of action of the RIF/ASC NPs seems to be the result of collaborative effects between NPs and the RIF/ASC antibiotic combination. Moreover, results indicated that the functionalized RIF/ASC NP surface played a crucial role on the processes of NP adhesion into the bacterial surface, the alterations on the cell membrane integrity, and the cell uptake of the RIF/ASC antibiotic into bacteria. Further, the in vivo lung deposition pattern of empty NPs labeled (NPs-FITC) with isothiocyanate fluorescein in rats was investigated post intratracheal instillation of NPs. In summary, findings from this work show that our novel designed engineered RIF/ASC co-loaded NPs could be a suitable system for antibiotic lung administration with promising perspectives for effective treatments of pulmonary intracellular infections for those known antibiotics that are losing effectiveness due to antimicrobial resistance problems. Graphical Abstract.

Mitochondrial Dysfunctions May Be One of the Major Causative Factors Underlying Detrimental Effects of Benzalkonium Chloride

Benzalkonium chloride (BAC) is currently the most commonly used antimicrobial preservative in ophthalmic solutions, nasal sprays, and cosmetics. However, a large number of clinical and experimental investigations showed that the topical administration of BAC-containing eye drops could cause a variety of ocular surface changes, from ocular discomfort to potential risk for future glaucoma surgery. BAC-containing albuterol may increase the risk of albuterol-related systemic adverse effects. BAC, commonly present in personal care products, in cosmetic products can induce irritation and dose-dependent changes in the cell morphology. The cationic nature of BAC (it is a quaternary ammonium) suggests that one of the major targets of BAC in the cell may be mitochondria, the only intracellular compartment charged negatively. However, the influence of BAC on mitochondria has not been clearly understood. Here, the effects of BAC on energy parameters of rat liver mitochondria as well as on yeast cells were examined. BAC, being a "weaker" uncoupler, potently inhibited respiration in state 3, diminished the mitochondrial membrane potential, caused opening of the Ca2+/Pi-dependent pore, blocked ATP synthesis, and promoted H₂O₂ production by mitochondria. BAC triggered oxidative stress and mitochondrial fragmentation in yeast cells. BAC-induced oxidative stress in mitochondria and yeast cells was almost totally prevented by the mitochondria-targeted antioxidant SkQ1; the protective effect of SkQ1 on mitochondrial fragmentation was only partial. Collectively, these data showed that BAC acts adversely on cell bioenergetics (especially on ATP synthesis) and mitochondrial dynamics and that its prooxidant effect can be partially prevented by the mitochondria-targeted antioxidant SkQ1.

Adhesion and bactericidal properties of nanostructured surfaces dependent on bacterial motility

Different nanostructured surfaces have bactericidal properties that arise from the interaction between the bacteria and the nanostructured surface. In this study, we focused on the relationship between bacterial motility and bactericidal properties. The motility of Escherichia coli (E. coli) was tuned by genetic engineering, and four types of E. coli (wild type (WT), lacking flagella, and flagellated with deficient motility or deficient chemotaxis) were used to evaluate the adhesion and bactericidal properties of nanostructured surfaces. Cicada (Cryptotympana facialis) wings and Si nano-pillar array substrates were used as natural and artificial nanostructured surfaces, respectively. Differences in motility and chemotaxis strongly influenced the adhesion behavior and to some extent, the damage to the cell membrane. These results suggest that the bactericidal properties of nanostructured surfaces depend on bacterial motility.

Bactericidal effect derived from nanostructured surface was evaluated in the point of view of the motility of E. coli. The results suggest that the properties strongly depend on bacterial motility.

The antibacterial mechanism of ultrasound in combination with sodium hypochlorite in the control of Escherichia coli

In the present study, the action mechanism of ultrasound (US) combined with sodium hypochlorite (SH) against Escherichia coli was illustrated by different analysis, including reduction, particle size distribution, scanning electron microscopy (SEM), transmission electron microscopy (TEM), K⁺ leakage, confocal laser scanning microscopy (CLSM) and fluorescence spectroscopy of Escherichia coli. The results showed that ultrasound improved the antimicrobial effect of SH in control of E. coli. No significant difference was obtained in reduction of E. coli, CLSM analysis and K⁺ leakage between US + SH₃₀ (US + 30 ppm SH) and SH₅₀ (50 ppm SH) treatment. Smaller particle size was recorded in US and US + SH₃₀ treatment. The changes of morphology and intracellular organization of E. coli cells as a result of these treatments were confirmed by SEM and TEM analyses. Fluorescence spectroscopy results indicated SH₃₀, US + SH₃₀ and SH₅₀ treatment caused the burial of tyrosine residues and tryptophan residues as well as increase of hydrophobicity. Therefore, the mechanism of US + SH₃₀ treatment against E. coli involved decreased particle size, damaged membrane and changes of intracellular organization and protein conformation.

Biocide Potentiation Using Cinnamic Phytochemicals and Derivatives

Surface disinfection is of utmost importance in the prevention of bacterial infections. This study aims to assess the ability of ten phytochemicals and related derivatives as potentiators of two commonly used biocides-cetyltrimethylammonium bromide (CTAB) and lactic acid (LA). LA in combination with cinnamic, hydrocinnamic, α-methylcinnamic, and α-fluorocinnamic acids had a factional inhibitory concentration index (FICI) ≤ 1 for Escherichia coli and Staphylococcus aureus. Several phytochemicals/derivatives in combination with biocides improved the biocidal efficacy against early sessile bacteria. The most effective combination was LA with allyl cinnamate (2.98 ± 0.76 log CFU.cm^-2 reduction) against E. coli. The combination with CTAB was successful for most phytochemicals/derivatives with a maximum bactericidal efficacy against sessile E. coli when combined with allyl cinnamate (2.20 ± 0.07 log CFU.cm^-2 reduction) and for S. aureus when combined with α-methylcinnamic acid (1.68 ± 0.30 log CFU.cm^-2 reduction). This study highlights the potential of phytochemicals and their derivatives to be used in biocide formulations.

Sublethal Injury Caused to Listeria monocytogenes by Natural Plant Extracts: Case Study on Grape Seed Extract and Garlic Extract

Natural antimicrobials, such as grape seed extract (GSE) and garlic extract (GE), are often used as (a part of) novel food preservation technologies, especially due to their antilisterial effect. However, little is known on the extent of sublethal injury (SI) these extracts cause to Listeria monocytogenes, possibly leading to overestimated efficacies for such novel technologies. The influence of both extracts on the sublethal injury of L. monocytogenes strain LMG23775 was investigated, also using propidium iodide staining to investigate the nature of the injury. Minimum inhibitory concentrations were 500 mg gallic acid equivalents (GAE)/L and 7.5 μg allicin/mL for GSE and GE, respectively. These concentrations slowed down the growth of L. monocytogenes, while only causing a significant amount of SI for GSE. Pure extracts caused inactivation of the cells, with GSE being the most effective. Sublethal injury from pure GSE was mainly caused by membrane damage. In pure GE, a significant amount of SI, not caused by membrane damage, was also present, albeit less pronounced than in pure GSE. In conclusion, both extracts cause a significant amount of sublethal injury to L. monocytogenes, which is not taken into account in relevant studies investigating novel food preservation applications involving natural plant extracts.

A Fast and Easy ATP-Based Approach Enables MIC Testing for Non-resuscitating VBNC Pathogens

Many bacteria enter the viable but non-culturable (VBNC) state to maximize resources and increase their tolerance to harmful conditions to cope with environmental stress, which has been described for a plethora of important human and foodborne pathogens. VBNC pathogens can potentially present a serious risk to human health as they are invisible to routine microbiological culture-based methods. Of high importance is the increased tolerance to antibiotics or disinfectant measures while in the VBNC state. The greatest remaining challenge for such investigations is the lack of an appropriate, cost-effective multi-species screening method due to experimental constraints. In this study, we investigated if de novo ATP production of cells in the VBNC state is a suitable indicator for overall cell viability that can be utilized to determine the minimum ATP inhibitory concentration (MAIC) of antibiotics and other antimicrobials. To validate this approach, heat-stress time-kill experiments were performed with both culturable and VBNC cells. We developed a comprehensive experimental setup and demonstrated the applicability of this VBNC–MIC assay for testing the tolerance of 12 strains of 4 important bacterial species (Escherichia coli, Bacillus cereus, Pseudomonas aeruginosa, and Listeria monocytogenes) in the VBNC state to eight important antimicrobials including four different antibiotics. We confirmed that bacteria in the VBNC state were resistant to all tested antibiotics (ampicillin, imipenem, ciprofloxacin, and gentamicin) and additionally insensitive to disinfectants (benzalkonium chloride and trioctylmethylammonium chloride) and preservatives (bronopol and sodium azide). These data emphasize the need for further research regarding the characteristics of bacterial pathogens in the VBNC state and present the advantages and high-throughput capabilities of ATP determinations to investigate tolerance of VBNC pathogens to antimicrobials. The presented method should be helpful in order to identify appropriate countermeasures, treatments, or disinfectants when confronted with bacterial pathogens in the VBNC state.

Upregulation of peroxide scavenging enzymes and multidrug efflux proteins highlight an active sodium hypochlorite response in Pseudomonas fluorescens biofilms

The oxidative biocide sodium hypochlorite is among the most commonly used antimicrobial agents in the control of surface-attached microbial communities (biofilms). Clarifying the genetic response of microorganisms in biofilms to hypochlorite may contribute to improved biofilm control strategies. Here, RNA-seq was used to investigate the differential gene expression response of industrially relevant Pseudomonas fluorescens biofilms to sub-lethal concentrations of sodium hypochlorite. Pseudomonas biofilms responded to hypochlorite exposure with increased transcription of genes encoding peroxide scavenging enzymes (e.g., alkyl hydroperoxide reductase (Ahp) and hydroperoxide resistance protein (Ohr)), oxidative stress repair enzymes (e.g., the periplasmic sulfoxide reductase YedYZ complex), and multidrug efflux (e.g., MexEF pumps). In addition, genes involved in amino acid synthesis and energy metabolism were down-regulated following hypochlorite exposure. This work improves the current understanding of genetic response mechanisms to biocides and contributes to the optimization of biocides and application strategies.

The use of selected phytochemicals with EDTA against Escherichia coli and Staphylococcus epidermidis single- and dual-species biofilms

The aim of this study was the development of a novel and effective antibacterial formulation combining selected phytochemical compounds (quercetin, cuminaldehyde, indole-3-carbinol and vanillic acid) with ethylenediaminetetraacetic acid (EDTA), an aminopolycarboxylic acid. The antibacterial activity of the combinations was evaluated against Escherichia coli and Staphylococcus epidermidis in planktonic and sessile states as single and dual species. The compounds when applied individually demonstrated modest antibacterial activity. Nevertheless, synergy was observed when EDTA was combined with the selected phytochemicals, particularly with cuminaldehyde and indole-3-carbinol. These combinations were evaluated against single- and dual-species biofilms. An inactivation of 100% was obtained for almost all the biofilms, with E. coli biofilms showing the highest resistance. This study allowed the discovery of novel formulations of phytochemical compounds with antibacterial activity against E. coli and S. epidermidis single- and dual-species biofilms at concentrations close to the minimum bactericidal concentration. SIGNIFICANCE AND IMPACT OF THE STUDY: The synergistic combinations of EDTA and cuminaldehyde or indole-3-carbinol were effective against single- and dual-species E. coli and S. epidermidis planktonic cells and biofilms. The overall results highlight the role of phytochemical products as a green and sustainable source of antimicrobial potentiators to control bacteria in both planktonic and sessile states.

Effect of polyhexamethylene biguanide functionalized silver nanoparticles on the growth of Staphylococcus aureus

Polyhexamethylene biguanide (PHMB) was used as a stabilizing ligand to synthesize uniform silver nanoparticles (Ag NPs). The effects and action mechanism of PHMB functionalized Ag NPs (Ag NPs-PHMB) on the growth of the Gram-positive bacteria Staphylococcus aureus were investigated. The results showed that a high concentration Ag NPs-PHMB could be obtained and prepared particles were fairly uniform. Prepared Ag NPs-PHMB enhanced the bactericidal effect and the log kill reached 5.06 when S. aureus was exposed to Ag NPs-PHMB for 20 min. Ag NPs-PHMB caused damage to cell wall, a decrease in the membrane fluidity, and leakage of K+, Mg2+, ATP and proteins from the cell, eventually leading to the death of S. aureus.

Inhibitive Properties of Benzyldimethyldodecylammonium Chloride on Microbial Corrosion of 304 Stainless Steel in a Desulfovibrio desulfuricans-Inoculated Medium

Biocides are frequently used to control sulfate-reducing bacteria (SRB) in biofouling. The increasing restrictions of environmental regulations and growing safety concerns on the use of biocides result in efforts to minimize the amount of biocide use and develop environmentally friendly biocides. In this study, the antimicrobial activity and corrosion inhibition effect of a low-toxic alternative biocide, benzyldimethyldodecylammonium chloride (BDMDAC), on a 304 stainless steel substrate immersed in a Desulfovibrio desulfuricans (D. desulfuricans)-inoculated medium was examined. Potentiodynamic polarization curves were used to analyze corrosion behavior. Biofilm formation and corrosion products on the surfaces of 304 stainless steel coupons were examined using scanning electron microscopy (SEM), energy-dispersive X-ray spectrum, and confocal laser scanning microscopy (CLSM). Results demonstrated that this compound exhibited satisfactory results against microbial corrosion by D. desulfuricans. The corrosion current density and current densities in the anodic region were lower in the presence of BDMDAC in the D. desulfuricans-inoculated medium. SEM and CLSM analyses revealed that the presence of BDMDAC mitigated formation of biofilm by D. desulfuricans.

The antimicrobial spectrum of lysozyme broadened by reductive modification

In order to broaden the antimicrobial action spectrum of lysozyme against Gram-negative bacteria, different partially reduced lysozyme derivatives were obtained by reducing the R-S-S-R bonds of lysozyme using the reducing agent Na2SO3. The circular dichroism behavior analysis showed that the tertiary structure of the partially reduced lysozyme molecules became more flexible, leading to an obvious increase in the surface hydrophobicity and the tryptophan fluorescence intensity. Zeta potential analysis indicated that the introduction of SO32- led to a decrease in the surface charges of the reduced lysozyme molecules. Compared with the native lysozyme, the reduced lysozymes not only showed a 1 log increase in the antimicrobial activity against Escherichia coli ATCC 25922 and Salmonella enteritidis ATCC 13076 (P <0.05), but also maintained nearly the same antimicrobial activity against Staphylococcus aureus ATCC 29213 (P >0.05). Overall, the reductive modification with the food-friendly, compatible, and safe reducing agent Na2SO3 has broadened the antimicrobial action spectrum of the modified lysozymes against Gram-negative bacteria, with the enhancement extent depending on the reduction degree and the type of bacterial strains. The integrated results suggest that the Na2SO3-reduced lysozyme can be used as a novel safe potential bactericidal additive for food-processing industry.

Analysis of Adsorbed Layers of Benzyldimethyldodecylammonium Bromide on Silica Particles in Water Using the Sorbent Mass Variation Method

A "sorbent mass variation" (SMV) method has been suggested to investigate the adsorption at solid-liquid interfaces, which can provide information on the adsorbed layer structure including its thickness and composition. However, there has been little research focused on the method, and therefore, it is essential to examine its general applicability. Herein, the adsorption of benzyldimethyldodecylammonium bromide (BDDABr), a cationic surfactant, on silica (SiO₂) nanoparticles (with ∼12 and 24 nm in size, denoted as S-SiO₂ and L-SiO₂, respectively) in water was investigated using the SMV method. The adsorption isotherms all show a linearly declining tendency in the saturated adsorption regime, consistent with the prediction of the SMV model. The adsorption is interpreted to form noncomplete bilayers (or isolated admicelles). The thicknesses of the adsorbed bilayers on S-SiO₂ and L-SiO₂ are estimated to be ∼2.9 and 2.7 nm, respectively, and the volume fractions of BDDABr in the saturated adsorbed layers are 0.63 and 0.68, respectively. In addition, the change in the Gibbs free energy of the adsorption process is also analyzed, showing its spontaneous nature. This work demonstrates that the SMV method is available for investigation on the adsorption of surfactants at solid-liquid interfaces, which can provide information on the structure and formation thermodynamics of adsorbed layers.

Pseudomonas fluorescens tolerance to benzyldimethyldodecyl ammonium chloride: Altered phenotype and cross-resistance

OBJECTIVES

Benzyldimethyldodecyl ammonium chloride (BDMDAC) is a quaternary ammonium compound (QAC) with bactericidal action that is used as an active molecule in detergent formulations. Pseudomonas fluorescens is a Gram-negative bacterium with versatile metabolism that is frequently present in biofilms on industrial surfaces. This work reports P. fluorescens adaptation to BDMDAC and subsequent concurrent reduced susceptibility to the QAC benzalkonium chloride (BAC) and the antimicrobial ciprofloxacin (CIP).

METHODS

Stepwise adaptation to increasing concentrations of BDMDAC was easily achieved and caused changes in the bacterial phenotype of P. fluorescens. Adaptation was evaluated through minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) determination and was subsequently confirmed by time-kill curves. Biofilm phenotype (biomass and number of cells) was characterised for the adapted and reference strains after treatment with BDMDAC, BAC and CIP.

RESULTS

Susceptibility to BAC and CIP was reduced in adapted P. fluorescens. Biofilms developed by the adapted strain had 20% more mass and a higher number of bacteria (2 log).

CONCLUSIONS

This study revealed that exposure to sublethal concentrations of BDMDAC may select tolerant strains to that product as well as to related products and unrelated antimicrobial agents.

Cobalt Complex with Thiazole-Based Ligand as New Pseudomonas aeruginosa Quorum Quencher, Biofilm Inhibitor and Virulence Attenuator

Pseudomonas aeruginosa is one of the most dreaded human pathogens, because of its intrinsic resistance to a number of commonly used antibiotics and ability to form sessile communities (biofilms). Innovative treatment strategies are required and that can rely on the attenuation of the pathogenicity and virulence traits. The interruption of the mechanisms of intercellular communication in bacteria (quorum sensing) is one of such promising strategies. A cobalt coordination compound (Co(HL)₂) synthesized from (E)-2-(2-(pyridin-2-ylmethylene)hydrazinyl)-4-(p-tolyl)thiazole (HL) is reported herein for the first time to inhibit P. aeruginosa 3-oxo-C12-HSL-dependent QS system (LasI/LasR system) and underling phenotypes (biofilm formation and virulence factors). Its interactions with a possible target, the transcriptional activator protein complex LasR-3-oxo-C12-HSL, was studied by molecular modeling with the coordination compound ligand having stronger predicted interactions than those of co-crystallized ligand 3-oxo-C12-HSL, as well as known-binder furvina. Transition metal group 9 coordination compounds may be explored in antipathogenic/antibacterial drug design.

Cytotoxicity and antimicrobial action of selected phytochemicals against planktonic and sessile Streptococcus mutans

Background

Dental caries remains the most prevalent and costly oral infectious disease worldwide, encouraging the search for new and more effective antimicrobials. Therefore, the aim of this work was to study the antimicrobial action of selected phytochemicals (eugenol, citronellol, sabinene hydrate, trans-cinnamaldehyde, terpineol and cinnamic acid) against Streptococcus mutans in planktonic and biofilm states as well as the cytotoxicity of these compounds.

Methods

The antibacterial activity of the selected compounds was evaluated by the determination of the minimal bactericidal concentration. The resazurin assay was used to assess the metabolic activity of sessile S. mutans. The cytotoxicity was determined using a fibroblast cell line.

Results

Among the tested phytochemicals, citronellol, cinnamic acid and trans-cinnamaldehyde were the most effective against both planktonic and sessile S. mutans, an effect apparently related to their hydrophobic character. Additionally, these three compounds did not compromise fibroblasts cell viability.

Discussion

Citronellol, cinnamic acid and trans-cinnamaldehyde demonstrated significant antimicrobial activity and low cytotoxicity proposing their potential as a novel group of therapeutic compounds to control oral infectious diseases. Moreover, their effects are particularly relevant when benchmarked against eugenol, a phytochemical commonly used for prosthodontic applications in dentistry.

Impacts of quaternary ammonium compounds on membrane bioreactor performance: Acute and chronic responses of microorganisms

Quaternary ammonium compounds (QACs) are emerging contaminants with the extensive applications in a variety of fields. However, little is known about their potential impacts on activated sludge and performance of biological wastewater treatment processes. In this work, the effects of benzalkonium chloride (BAC, a kind of QACs) on acute and chronic responses of microorganisms and on MBR performance were systematically investigated. The results showed that a low concentration (0.5-2.0 mg BAC/g SS) caused no significant effects on activated sludge property. In contrast, an elevated concentration of BAC led to severer inhibition on activated sludge and key enzyme activity (e.g., dehydrogenase activity) in both short-term and long-term exposure, thus deteriorating the pollutant removal efficiency. Compared with the control MBR (R1) and the reactor with 0.5 mg/L BAC (R2), the removal efficiency of ammonia in R3 with 5.0 mg/L BAC at identical hydraulic retention time (4.3 h) and sludge retention time (30 d) was decreased, i.e., ammonium removal efficiency in R1∼R3 was 95.4 ± 6.1, 93.4 ± 8.1 and 89.3 ± 17.6%, respectively. Moreover, MBR tests showed that membrane fouling was aggravated in the presence of high-concentration BAC. Long-term exposure to BAC reduced microbial community diversity and enriched the BAC-resistant microbes. For instance, the abundance of Pseudomonas genus in R3 was increased from 0.02% to 14.9% with the increase of operation time. Microbial community structure was changed to resist the environmental stress induced by BAC during long-term exposure, thus decreasing the inhibition effects.

Action of Monomeric/Gemini Surfactants on Free Cells and Biofilm of Asaia lannensis

We investigated the biological activity of surfactants based on quaternary ammonium compounds: gemini surfactant hexamethylene-1,6-bis-(N,N-dimethyl-N-dodecylammonium bromide) (C6), synthesized by the reaction of N,N-dimethyl-N-dodecylamine with 1,6-dibromohexane, and its monomeric analogue dodecyltrimethylammonium bromide (DTAB). The experiments were performed with bacteria Asaia lannensis, a common spoilage in the beverage industry. The minimal inhibitory concentration (MIC) values were determined using the tube standard two-fold dilution method. The growth and adhesive properties of bacterial cells were studied in different culture media, and the cell viability was evaluated using plate count method. Both of the surfactants were effective against the bacterial strain, but the MIC of gemini compound was significantly lower. Both C6 and DTAB exhibited anti-adhesive abilities. Treatment with surfactants at or below MIC value decreased the number of bacterial cells that were able to form biofilm, however, the gemini surfactant was more effective. The used surfactants were also found to be able to eradicate mature biofilms. After 4 h of treatment with C6 surfactant at concentration 10 MIC, the number of bacterial cells was reduced by 91.8%. The results of this study suggest that the antibacterial activity of the gemini compound could make it an effective microbiocide against the spoilage bacteria Asaia sp. in both planktonic and biofilm stages.

Enhanced killing of Escherichia coli using a combination of polyhexamethylene biguanide hydrochloride and 1-bromo-3-chloro-5,5- dimethylimidazolidine-2,4-dione

The bactericidal activities of polyhexamethylene biguanide hydrochloride (PHMB), 1-bromo-3-chloro-5,5-dimethylimidazolidine-2,4-dione (BCDMH) and the combination of the two (designated as PB) were compared using Escherichia coli as the test organism. PB exhibited strong bactericidal activity: 10 mg/L PHMB combined with 8 mg/L BCDMH resulted in approximately 5.74 log10 reduction (LR), whereas 320 mg/L PHMB or 20 mg/L BCDMH was about 5.53 and 6.56 LR, respectively. Analyses using scanning electron microscopy, flow cytometry and atomic absorption spectroscopy indicated that PB, PHMB and BCDMH disrupted cell membranes and changed membrane structure and permeability, resulting in the leakage of intracellular soluble proteins and ions. PB exerted stronger effects on potassium and magnesium leakage, membrane potential and permeability than BCDMH did. PB caused less protein leakage than PHMB did. These results suggest that at a relatively low concentration, PB exhibited good bactericidal activity and physiological effect on E. coli.