Performance of a Low-Cost Acoustic Insect Detector System with Sitophilus oryzae (Coleoptera: Curculionidae) in Stored Grain and Tribolium castaneum (Coleoptera: Tenebrionidae) in Flour

Vibro-Acoustic Signatures of Various Insects in Stored Products

Stored products, such as grains and processed foods, are susceptible to infestation by various insects. The early detection of insects in the supply chain is crucial, as introducing invasive pests to new environments may cause disproportionate harm. The STAR Center at Stevens Institute of Technology developed the Acoustic Stored Product Insect Detection System (A-SPIDS) to detect pests in stored products. The system, which comprises a sound-insulated container for product samples with a built-in internal array of piezoelectric sensors and additional electret microphones to record outside noise, was used to conduct numerous measurements of the vibroacoustic signatures of various insects, including the Callosobruchus maculatus, Tribolium confusum, and Tenebrio molitor, in different materials. A normalization method was implemented using the ambient noise of the sensors as a reference, to accommodate for the proprietary, non-calibrated sensors and allowing to set relative detection thresholds for unknown sensitivities. The normalized envelope of the filtered signals was used to characterize and compare the insect signals by estimating the Normalized Signal Pulse Amplitude (NSPA) and the Normalized Spectral Energy Level (NSEL). These parameters characterize the insect detection Signal Noise Ratio (SNR) for pulse-based detection (NSPA) and averaged energy-based detection (NSEL). These metrics provided an initial step towards the design of a reliable detection algorithm. In the conducted tests NSPA was significantly larger than NSEL. The NSPA reached 70 dB for T. molitor in corn flakes. The insect signals were lower in flour where the averaged NSPA and NSEL values were around 40 dB and 11 dB to 16 dB, respectively.

A CNN-Based Method for Enhancing Boring Vibration with Time-Domain Convolution-Augmented Transformer

Recording vibration signals induced by larvae activity in the trunk has proven to be an efficient method for detecting trunk-boring insects. However, the accuracy of the detection is often limited because the signals collected in real-world environments are heavily disrupted by environmental noises. To deal with this problem, we propose a deep-learning-based model that enhances trunk-boring vibration signals, incorporating an attention mechanism to optimize its performance. The training data utilized in this research consist of the boring vibrations of Agrilus planipennis larvae recorded within trunk sections, as well as various environmental noises that are typical of the natural habitats of trees. We mixed them at different signal-to-noise ratios (SNRs) to simulate the realistically collected sounds. The SNR of the enhanced boring vibrations can reach up to 17.84 dB after being enhanced by our model, and this model can restore the details of the vibration signals remarkably. Consequently, our model's enhancement procedure led to a significant increase in accuracy for VGG16, a commonly used classification model. All results demonstrate the effectiveness of our approach for enhancing the detection of larvae using boring vibration signals.

Field Evaluation of Promising Indigenous Entomopathogenic Fungal Isolates against Red Palm Weevil, Rhynchophorus ferrugineus (Coleoptera: Dryophthoridae)

The rate of the sounds (i.e., substrate vibrations) produced by the movement and feeding activity of red palm weevil (RPW) pest infestations in a date palm tree was monitored over time after trees were separately treated with injection of entomopathogenic fungal isolates, Beauveria bassiana and Metarhizium anisopliae, or water treatment as the control. The activity sensing device included an accelerometer, an amplifier, a digital recorder, and a signal transmitter that fed the data to a computer that excluded background noise and compared the rates of bursts of movement and feeding sound impulses among treated trees and controls. Observations were made daily for two months. The rates of bursts were representative of the feeding activity of RPW. The unique spectral pattern of sound pulses was typical of the RPW larval feeding activity in the date palm. The microphone confirmed that the same unique tone was produced in each burst. Two months after fungal injection, the RPW sound signal declined, while the RPW sound signal increased in the control date palms (water injection). The mean rates of bursts produced by RPW decreased to zero after the trees were injected with B. bassiana or M. anisopliae compared with the increased rates over time in the control treatment plants.

Current progress on innovative pest detection techniques for stored cereal grains and thereof powders

For stored grains and their powders, pest infestation has always been a knotty problem and thus comprises a serious threat to global food security. Obviously, timely, rapid and accurate pest detection methods are of extreme importance to protect grains from pest mouth. In facing the defects of traditional methods, such as visual inspection, grain flotation and pest trap, diverse innovative approaches progressed fast alternatively, either targeting pest itself or diagnosing pest-induced changes. The former includes machine vision, metabolite analysis, pest-specific protein techniques, molecular techniques, bioacoustics analysis, conductive roller mill, low-field nuclear magnetic resonance spectroscopy and imaging, while the latter consists of thermal imaging, near-infrared spectroscopy and hyperspectral imaging, impact acoustics analysis, soft X-ray imaging and tomography. The principle, operation procedure, pros and cons and application scenarios were discussed for each method. The results herein hope to promote the technical revolution of pest inspection in stored cereal grains and their powders.

Automated Applications of Acoustics for Stored Product Insect Detection, Monitoring, and Management

Simple Summary

A variety of different acoustic devices has been commercialized for detection of hidden insect infestations in stored products, trees, and soil, including a recently introduced device demonstrated in this report to successfully detect rice weevil immatures and adults in grain. Several of the systems have incorporated digital signal processing and statistical analyses such as neural networks and machine learning to distinguish targeted pests from each other and from background noise, enabling automated monitoring of the abundance and distribution of pest insects in stored products, and potentially reducing the need for chemical control. Current and previously available devices are reviewed in the context of the extensive research in stored product insect acoustic detection since 2011. It is expected that further development of acoustic technology for detection and management of stored product insect pests will continue, facilitating automation and decreasing detection and management costs.

Abstract

Acoustic technology provides information difficult to obtain about stored insect behavior, physiology, abundance, and distribution. For example, acoustic detection of immature insects feeding hidden within grain is helpful for accurate monitoring because they can be more abundant than adults and be present in samples without adults. Modern engineering and acoustics have been incorporated into decision support systems for stored product insect management, but with somewhat limited use due to device costs and the skills needed to interpret the data collected. However, inexpensive modern tools may facilitate further incorporation of acoustic technology into the mainstream of pest management and precision agriculture. One such system was tested herein to describe Sitophilus oryzae (Coleoptera: Curculionidae) adult and larval movement and feeding in stored grain. Development of improved methods to identify sounds of targeted pest insects, distinguishing them from each other and from background noise, is an active area of current research. The most powerful of the new methods may be machine learning. The methods have different strengths and weaknesses depending on the types of background noise and the signal characteristic of target insect sounds. It is likely that they will facilitate automation of detection and decrease costs of managing stored product insects in the future.