Analysis of a cloned colicin Ib gene: complete nucleotide sequence and implications for regulation of expression

Regulating colicin synthesis to cope with stress and lethality of colicin production

Colicins are plasmid-encoded bacteriocins active against Escherichia coli and closely related species of Enterobacteriaceae. They promote microbial diversity and genetic diversity in E. coli populations. Colicin synthesis is characteristically repressed by the LexA protein, the key regulator of the SOS response. As colicins are released by cell lysis, generally two LexA dimers binding to two overlapping SOS boxes control untimely expression. Nevertheless, genetic organization of the colicin clusters, additional transcription regulators as well as post-transcriptional mechanisms involving translational efficiency of the lysis and activity genes fine-tune colicin expression and protect against lethality of colicin production.

Identification of channel-lining amino acid residues in the hydrophobic segment of colicin Ia

Colicin Ia is a bactericidal protein of 626 amino acid residues that kills its target cell by forming a channel in the inner membrane; it can also form voltage-dependent channels in planar lipid bilayer membranes. The channel-forming activity resides in the carboxy-terminal domain of ∼177 residues. In the crystal structure of the water-soluble conformation, this domain consists of a bundle of 10 α-helices, with eight mostly amphipathic helices surrounding a hydrophobic helical hairpin (helices H8-H9). We wish to know how this structure changes to form a channel in a lipid bilayer. Although there is evidence that the open channel has four transmembrane segments (H8, H9, and parts of H1 and H6-H7), their arrangement relative to the pore is largely unknown. Given the lack of a detailed structural model, it is imperative to better characterize the channel-lining protein segments. Here, we focus on a segment of 44 residues (573–616), which in the crystal structure comprises the H8-H9 hairpin and flanking regions. We mutated each of these residues to a unique cysteine, added the mutant colicins to the cis side of planar bilayers to form channels, and determined whether sulfhydryl-specific methanethiosulfonate reagents could alter the conduction of ions through the open channel. We found a pattern of reactivity consistent with parts of H8 and H9 lining the channel as α-helices, albeit rather short ones for spanning a lipid bilayer (12 residues). The effects of the reactions on channel conductance and selectivity tend to be greater for residues near the amino terminus of H8 and the carboxy terminus of H9, with particularly large effects for G577C, T581C, and G609C, suggesting that these residues may occupy a relatively constricted region near the cis end of the channel.

Colicin biology

Colicins are proteins produced by and toxic for some strains of Escherichia coli. They are produced by strains of E. coli carrying a colicinogenic plasmid that bears the genetic determinants for colicin synthesis, immunity, and release. Insights gained into each fundamental aspect of their biology are presented: their synthesis, which is under SOS regulation; their release into the extracellular medium, which involves the colicin lysis protein; and their uptake mechanisms and modes of action. Colicins are organized into three domains, each one involved in a different step of the process of killing sensitive bacteria. The structures of some colicins are known at the atomic level and are discussed. Colicins exert their lethal action by first binding to specific receptors, which are outer membrane proteins used for the entry of specific nutrients. They are then translocated through the outer membrane and transit through the periplasm by either the Tol or the TonB system. The components of each system are known, and their implication in the functioning of the system is described. Colicins then reach their lethal target and act either by forming a voltage-dependent channel into the inner membrane or by using their endonuclease activity on DNA, rRNA, or tRNA. The mechanisms of inhibition by specific and cognate immunity proteins are presented. Finally, the use of colicins as laboratory or biotechnological tools and their mode of evolution are discussed.

Pore-forming colicins and their relatives

The pore-forming colicins, the first proteins that were capable of forming voltage-dependent ion channels to be sequenced, have turned out to be both less tractable and more mysterious than imagined; yet they have proved interesting at every step of their short journey from producing cell to vanquished target cell. Starting out as a remarkably extended water-soluble protein, the colicin molecule is designed to interact simultaneously with several components of the complex membrane of the target cell, transform itself into a membrane protein, and become an ion channel with inscrutable properties. Unraveling how it does all this appears to be leading us into the dark recesses of protein/protein and protein/membrane interaction, where lurk fundamental processes reluctantly waiting to be revealed.

Evidence that the immunity protein inactivates colicin 5 immediately prior to the formation of the transmembrane channel

Determination and analysis of the nucleotide sequences of the activity, immunity, and lysis genes of colicin 5 assigned colicin 5 to the subclass of pore-forming colicins to which colicins 10, E1, Ia, Ib, and K belong. Mutational analysis of colicin 5 and exchange of DNA fragments between the most closely related colicins, colicins 5 and 10, and between their immunity proteins localized the regions that determine the reaction specificity between colicin 5 and its immunity protein to residues 405 to 424 of colicin 5, the region corresponding to the amphiphilic alpha-helix 6 of the similar colicins E1 and Ia. The specificity-conferring residues 55 to 58 and 68 to 75 of the immunity protein were localized in the cytoplasmic loop and the inner leaflet of the cytoplasmic membrane. The localization of the reactive regions of the immunity protein and the colicin close to the inner side of the cytoplasmic membrane suggests that the immunity protein inactivates colicin 5 shortly before the lethal colicin pores in the cytoplasmic membrane are opened.

Ion selectivity of colicin E1: III. Anion permeability

The antibiotic protein colicin E1 forms ion channels in planar lipid bilayers that are capable of conducting monovalent organic cations having mean diameters of at least 9 A. Polyvalent organic cations appear to be completely impermeant, regardless of size. All permeant ions, whether large or small, positively or negatively charged, are conducted by this channel at very slow rates. We have examined the permeability of colicin E1 channels to anionic probes having a variety of sizes, shapes, and charge distributions. In contrast to the behavior of cations, polyvalent as well as monovalent organic anions were found to permeate the colicin E1 channel. Inorganic sulfate was able to permeate the channel only when the pH was 4 or less, conditions under which the colicin E1 protein is predominantly in an anion-preferring conformational state. The less selective state(s) of the colicin E1 channel, observed when the pH was 5 or greater, was not permeable to inorganic sulfate. The sulfate salt of the impermeant cation Bis-T6 (N,N,N',N'-tetramethyl-1,6-hexanediamine) had no effect on the single channel conductance of colicin E1 channels exposed to solutions containing 1 M NaCl at pH 5. The complete lack of blocking activity by either of these two impermeant ions indicates that both are excluded from the channel lumen. These results are consistent with our hypothesis that there is but a single location in the lumen of the colicin E1 channel where positively charged groups can be effectively hydrated. This site may coincide with the location of the energetic barrier which impedes the movement of anions.

All in the family: the toxic activity of pore-forming colicins

Colicins are unusual bacterial toxins because they are directed against close relatives of the producing strain. They kill their targets in one of three distinct ways; via a ribonuclease or deoxyribonuclease activity or by forming pores in the target cell's membrane. This review deals with the steps involved in pore-forming colicin activity including, initial synthesis of the toxin, toxin release, receptor binding, translocation across the periplasm and pore formation in the cytoplasmic membrane. Special reference is made to the role of colicin in vivo, the structural changes occurring during pore formation and the role of the immunity protein.

The role of electrostatic charge in the membrane insertion of colicin A. Calculation and mutation

The bacterial toxin colicin A binds spontaneously to the surfaces of negatively charged membranes. The surface-bound toxin must subsequently, however, become an acidic 'molten globule' before it can fully insert into the lipid bilayer. Clearly, electrostatic interactions must play a significant role in both events. The electrostatic field around the toxin in solution was calculated using the finite-difference Poisson-Boltzmann method of the Delphi programme and the known X-ray structure. A large positively charged surface was identified which could be involved in the binding of colicin to negatively charged membranes. The applicability of the result was tested by also calculating the fields around modelled structures of the closely related colicins B and N. Surprisingly, colicin N showed a similar charge distribution in spite of its isoelectric point of pI 10.20 (colicin A has pI 5.44). One reason for this is the strong conservation of certain negative charges in all colicins. There is a single highly conserved aspartate residue (Asp78) on the positively charged face which provides a small but discrete region of negative charge. This residue, Asp78, was replaced by asparagine in the mutant D78N. D78N binds faster to negatively charged vesicles but inserts only half as fast as the wild-type protein into the membrane core. This indicates that, first, the initial membrane binding has a significant electrostatic component and, second, that the isolated charge on Asp78 plays a role in the formation of the insertion intermediate.

Mechanisms of antibacterial action of tachyplesins and polyphemusins, a group of antimicrobial peptides isolated from horseshoe crab hemocytes

Tachyplesins I and II and polyphemusins I and II, cationic peptides isolated from the hemocytes of horseshoe crabs, show bactericidal activities with similar efficiencies for both gram-negative and gram-positive bacteria. Tachyplesin I inhibited bacterial growth irreversibly within 40 min. A subinhibitory concentration of tachyplesin I sensitized gram-negative bacteria to the bactericidal actions of novobiocin and nalidixic acid, although polymyxin B-resistant strains which have altered lipopolysaccharides were susceptible to tachyplesin I. This implies that tachyplesin permeabilizes the outer membrane and that the likely target of its action is outer membrane constituents other than lipopolysaccharides. On the other hand, a defensin-susceptible phoP strain of Salmonella typhimurium was also susceptible to tachyplesin I. Tachyplesin I rapidly depolarized the inverted inner-membrane vesicles of Escherichia coli. These results suggest that depolarization of the cytoplasmic membrane, preceded by the permeabilization of the outer membrane for gram-negative bacteria, is associated with tachyplesin-mediated bactericidal activity. The similarity between the actions of tachyplesin and those of defensin was discussed.

Ion selectivity of colicin E1: modulation by pH and membrane composition

Colicin E1 is a plasmid-encoded bacteriocidal protein which, though water soluble when secreted by its host bacterium, spontaneously interacts with planar lipid bilayers to form voltage-gated ion channels. In asolectin bilayers, the preference for anions over cations exhibited by these channels at low pH can be reversed by raising the pH on either side of the membrane. When incorporated into membranes composed of either of the two zwitterionic lipids, bacterial phosphatidylethanolamine and diphytanoyl phosphatidylcholine, colicin E1 channels were nearly ideally anion selective in the limit of low pH and moderately cation selective at the high pH limit. In phosphatidylcholine membranes, however, the response of these channels to changes in pH exhibited a pattern of behavior peculiar to this lipid. If the side of the membrane on which the protein had been introduced (the cis side) was exposed to pH 4.0, all the channels in the bilayer, whether opened or closed, became refractory to further changes in pH. This irreversibility has been interpreted as evidence that the selectivity of colicin E1 is under the control of a pH-sensitive conformational change. Protonation of groups on the cis side of the membrane appear to be essential to the conversion to the anion-selective state. These groups are rendered kinetically inaccessible to the aqueous phase when the transition takes place in phosphatidylcholine membranes.

Ion selectivity of colicin E1: II. Permeability to organic cations

Channels formed by colicin E1 in planar lipid bilayers have large diameters and conduct both cations and anions. The rates at which ions are transported, however, are relatively slow, and the relative anion-to-cation selectivity is modulated over a wide range by the pH of the bathing solutions. We have examined the permeability of these channels to cationic probes having a variety of sizes, shapes, and charge distributions. All of the monovalent probes were found to be permeant, establishing a minimum diameter at the narrowest part of the pore of approximately 9 A. In contrast to this behavior, all of the polyvalent organic cations were shown to be impermeant. This simple exclusionary rule is interpreted as evidence that, when steric restrictions require partial dehydration of an ion, the structure of the channel is able to provide a substitute electrostatic environment for only one charged group at time.

Refined structure of the pore-forming domain of colicin A at 2.4 A resolution

The E1 subgroup (E1, A, B, IA, IB, K and N) of anti-bacterial toxins called colicins is known to form voltage-dependent channels in lipid bilayers. The crystal structure of the pore-forming domain of colicin A from Escherichia coli has been refined to the diffraction limit of the crystals at 2.4 A resolution by means of molecular dynamics and restrained least-squares methods to a conventional R-factor of 0.18 for all data between 6.0 and 2.4 A resolution. The polypeptide chain of 204 amino acid residues consists of ten alpha-helices organized in a three-layer structure. The helices range in length from 9 to 23 residues with an average length of 125 residues. The packing arrangement of the helices has been analysed; the packing is different from that observed in four-helix bundle proteins. The sites of 83 water molecules have been located and refined. Analysis of the structure provides insights into the mechanism of formation of a voltage-gated channel by the protein. Although it is proposed that substantial tertiary structural changes occur during membrane insertion, the secondary structural elements remain conserved. This idea has been proposed recently for a number of other protein-membrane events and thus may have more general applicability.

On the frequencies of nucleotides and nucleotide substitutions in conservative regulatory DNA sequences

We present data on the frequencies of nucleotides and nucleotide substitutions in conservative DNA regions involved in the regulation of gene expression. Data on prokaryotes and eukaryotes are considered separately. In both cases DNA strands complementary to those which serve as templates for RNA-polymerase have low frequencies of cytosine. The most conservative positions also have an increased frequency of adenine. Various substitutions in the series of homologous regulatory DNA sequences, as compared to their consensuses, have different frequencies. In prokaryotes guanine in a consensus sequence is substituted for at the lowest and adenine at the highest frequency, whereas in eukaryotes cytosine is substituted for at the lowest and guanine at the highest frequency. In both cases the nucleotides substituted for are most frequently replaced with cytosine. Deviations from consensus sequences tend to cluster in adjacent positions. The more pronounced the consequences of a nucleotide substitution are the higher is the frequency of substitutions in adjacent positions. Possible explanations for these phenomena are discussed.

Permeation of bacterial cells, permeation of cytoplasmic and artificial membrane vesicles, and channel formation on lipid bilayers by peptide antibiotic AS-48

Peptide AS-48 induces ion permeation, which is accompanied by the collapse of the cytoplasmic membrane potential, in sensitive bacteria. Active transport by cytoplasmic membrane vesicles is also impaired by AS-48. At low concentrations, this peptide also causes permeability of liposomes to low-molecular-weight compounds without a requirement for a membrane potential. Higher antibiotic concentrations induce severe disorganization, which is visualized under electron microscopy as aggregation and formation of multilamellar structures. Electrical measurements suggest that AS-48 can form channels in lipid bilayers.

A 136-amino-acid-residue COOH-terminal fragment of colicin A is endowed with ionophoric activity

DNA regions encoding the various domains of a protein can be expressed as separate entities by inserting at appropriate sites a 'STOP-Shine-Dalgarno-sequence-ATG' cassette encoding a termination codon, a Shine-Dalgano sequence and an initiation codon within the structural gene. This technique has been used to obtain a 137-amino-acid-residue pore-forming protein designated DA70C comprising the final 136-amino-acid-residue COOH-terminal of colicin A preceded by an NH2-terminal methionine. Da70C was correctly expressed but poorly released to the extracellular medium. Its purification involved, as a final step, a partition in Triton X-114 thus demonstrating that hydrophobic regions are exposed in this protein. The ability of DA70C to form ion channels in planar lipid bilayers was investigated and pore properties were analyzed. The results indicate that helices 1-3 of the 204-amino-acid-residue colicin pore-forming domain (containing 10 alpha-helices) are not involved in ion conduction through the channel. However, they are important in maintaining the stability of the soluble state of the COOH-terminal domain.

Colicin N forms voltage- and pH-dependent channels in planar lipid bilayer membranes

The protein antibiotic colicin N forms ion-permeable channels through planar lipid bilayers. Channels are induced when positive voltages higher than +60 mV are applied. Incorporated channels activate and inactivate in a voltage-dependent fashion. It is shown that colicin N undergoes a transition between an "acidic" and a "basic" channel form which are distinguishable by different voltage dependences. The single-channel conductance is non-ohmic and strongly dependent on pH, indicating that titratable groups control the passage of ions through the channel. The ion selectivity of colicin N channels is influenced by the pH and the lipid composition of the bilayer membrane. In neutral membranes the channel undergoes a transition from slightly cation-selective to slightly anion-selective when the pH is changed from 7 to 5. In lipid membranes bearing a negative surface charge the channel shows a more pronounced cation selectivity which decreases but does not reverse upon lowering the pH from 7 to 5. The high degree of similarity between the channel characteristics of colicin A and N suggests that the channels share common features in their molecular structure.

Formation of ion channels by colicin B in planar lipid bilayers

The gene for the antibacterial peptide colicin B was cloned and transformed into a host background where it was constitutively overexpressed. The purified gene product was biologically active and formed voltage-dependent, ion-conducting channels in planar phospholipid bilayers composed of asolectin. Colicin B channels exhibited two distinct unitary conductance levels, and a slight preference for Na+ over Cl-. Kinetic analysis of the voltage-driven opening and closing of colicin channels revealed the existence of at least two conducting states and two nonconducting states of the protein. Both the ion selectivity and the kinetics of colicin B channels were highly dependent on pH. Excess colicin protein was readily removed from the system by perfusing the bilayer, but open channels could be washed out only after they were allowed to close. A monospecific polyclonal antiserum generated against electrophoretically purified colicin B eliminated both the biological and in vitro activity of the protein. Membrane-associated channels, whether open or closed, remained functionally unaffected by the presence of the antiserum. Taken together, our results suggest that the voltage-independent binding of colicin B to the membrane is the rate-limiting step for the formation of ion channels, and that this process is accompanied by a major conformational rearrangement of the protein.

Interaction of mitochondrial porin with cytosolic proteins

Intracellular phosphorylation is an important step in active uptake and utilization of carbohydrates. For example glucose and glycerol enter the liver cell along the extra intracellular gradient by facilitated diffusion through specific carriers and are concentrated inside the cell by phosphorylation via hexokinase or glycerol kinase. Depending on the function of the respective tissue the uptake of carbohydrates serves different metabolic purposes. In brain and kidney medulla cells which depend on carbohydrates, glucose and glycerol are taken up according to the energy demand. However, in tissues such as muscle which synthesize glycogen or like liver which additionally produce fat from glucose, the uptake of carbohydrates has to be regulated according to the availability of glucose and glycerol. How the reversible coupling of the kinases to the outer membrane pore and the mitochondrial ATP serves to fulfil these specific requirements will be explained as well as how this regulates the carbohydrate uptake in brain according to the activity of the oxidative phosphorylation and how this allows glucose uptake in liver and muscle to persist in the presence of high glucose 6-phosphate without activating the rate of glycolysis.

The Rhizobium meliloti host range nodQ gene encodes a protein which shares homology with translation elongation and initiation factors

The Rhizobium meliloti nod region IIb is involved in host-range determination: (i) the presence of region IIb is necessary for transfer of alfalfa root hair curling ability to Rhizobium leguminosarum biovar trifolii; (ii) a mutation in region IIb extends the R. meliloti infection host range to Vicia sativa nigra; (iii) dominance of R. meliloti nod genes over R. leguminosarum biovar viciae nod genes is abolished by mutations in region IIb. The nucleotide sequence of this region has been determined. Genes corresponding to the two open reading frames identified are designated nodP and nodQ. The predicted amino acid sequence of the NodQ protein shows homology with translation initiation and elongation factors. The consensus sequence involved in the GTP-binding domain is conserved.

The membrane channel-forming colicin A: synthesis, secretion, structure, action and immunity

The study of colicin release from producing cells has revealed a novel mechanism of secretion. Instead of a built-in 'tag', such as a signal peptide containing information for secretion, the mechanism employs coordinate expression of a small protein which causes an increase in the envelope permeability, resulting in the release of the colicin as well as other proteins. On the other hand, the mechanism of entry of colicins into sensitive cells involves the same three stages of protein translocation that have been demonstrated for various cellular organelles. They first interact with receptors located at the surface of the outer membrane and are then transferred across the cell envelope in a process that requires energy and depends upon accessory proteins (TolA, TolB, TolC, TolQ, TolR) which might play a role similar to that of the secretory apparatus of eukaryotic and prokaryotic cells. At this point, the type of colicin described in this review interacts specifically with the inner membrane to form an ion channel. The pore-forming colicins are isolated as soluble proteins and yet insert spontaneously into lipid bilayers. The three-dimensional structures of some of these colicins should soon become available and site-directed mutagenesis studies have now provided a large number of modified polypeptides. Their use in model systems, particularly those in which the role of transmembrane potential can be tested for polypeptide insertion and ionic channel gating, constitutes a powerful handle with which to improve our understanding of the dynamics of protein insertion into and across membranes and the molecular basis of membrane excitability. In addition, their immunity proteins, which exist only in one state (membrane-inserted) will also contribute to such an understanding.

Pore-forming colicins: synthesis, extracellular release, mode of action, immunity

Colicins are bacterial toxins encoded by plasmids which also confer immunity to producing cells. In a first stage, colicins are synthesized in the cytoplasm of colicinogenic cells. Subsequently they are released into the extracellular medium following the action of a small protein synthesized coordinately with the colicins. This protein is a lipoprotein and causes a non-specific increase in the envelope permeability, in particular, through the activation of an outer membrane phospholipase. After release into the medium, colicins kill sensitive cells in 3 defined steps: adsorption onto a specific receptor at the surface of the bacterium, translocation across the outer membrane and action. A specific domain of the colicin molecule is responsible for each of these steps. The most common colicins are those which kill by depolarizing the cytoplasmic membrane with the formation of voltage-dependent ionic channels. Immunity is conferred to producing cells by a membrane protein which interacts with the colicin and prevents formation or functioning of these ionic channels formed by its C-terminal domain.

Hydrodynamic properties of colicin A. Existence of a high-affinity lipid-binding site and oligomerization at acid pH

The hydrodynamic properties of colicin A have been studied. The molecular mass of colicin A was determined from sedimentation equilibrium centrifugation to be 63 +/- 1.2 kDa, in agreement with that determined from the primary amino acid sequence [Morlon et al. (1983) J. Mol. Biol. 110, 271-289]. The sedimentation coefficient has been analyzed over a wide range of ionic strength (NaCl 0.06-0.56 M) and pH (8-4) and was found to remain almost constant. However, below pH 5 an oligomerization of colicin A to tetramers occurred. The frictional coefficient value indicated that the shape of the colicin A monomer was very asymmetric. Analysis of the pH dependence of circular dichroism of colicin A and of its COOH-terminal domain indicated that a sharp transition occurred between pH 4 and 3. This transition was very much reduced for the COOH-terminal domain in the presence of a non-ionic detergent. The presence of a lipid-binding site in colicin A at neutral pH was demonstrated both by hydrodynamic studies with micelles of n-hexadecanoyl and n-octadecanoylphosphocholine and by differential sensitivity to a proteolytic enzyme in the presence or absence of detergent micelles. About 75 molecules of lipid were bound under these conditions suggesting that colicin A was bound to lipid micelles. In contrast, at acid pH, in the presence of an excess of lipid the tetramer was dissociated into monomers complexed to 20-30 lipid molecules, indicating the exposure of a high-affinity lipid-binding site.

Sequence, expression and localization of the immunity protein for colicin B

Cells of Escherichia coli containing the cbi locus on plasmids are immune to colicin B which kills cells by dissipating the membrane potential through pore formation in the cytoplasmic membrane. The nucleotide sequence of the cbi region was determined. It contains an open reading frame for a polypeptide consisting of 175 amino acids. The amino acid sequence is homologous to the primary structure of the colicin A immunity protein. This, and the strong homology between the pore-forming domains of colicins A and B suggests a common evolutionary origin for both colicins. The immunity protein could be identified following strong overexpression of cbi. The electrophoretically determined molecular weight of 20,000 was close to the calculated molecular weight of 20,185. The protein contains four large hydrophobic regions. The immunity protein was localized in the membrane fraction and was mainly contained in the cytoplasmic membrane. It is proposed that the immunity protein inactivates the colicin in the cytoplasmic membrane.

Nucleotide sequencing of the structural gene for colicin N reveals homology between the catalytic, C-terminal domains of colicins A and N

An 1800 bp fragment of DNA from a natural ColN plasmid (pCHAP4) encompassing the colicin N structural gene (cna) and its regulatory region was subjected to nucleotide sequencing and deletion analysis. The region of DNA immediately upstream from cna contains two tandemly-arranged and overlapping potential LexA binding sites (SOS boxes), in line with the previous demonstration that cna expression is repressed by LexA protein. Deletion of the LexA binding site allowed efficient transcription of cna from an upstream lacZ promoter, whereas its presence reduced lacZ-promoted cna expression to varying extents depending on the proximity of lacZp and the SOS boxes. The molecular weight of colicin N, as deduced from the nucleotide sequence, is 41,696, which is close to the experimentally determined molecular weight of 39,000. Colicin N has a glycine-rich amino terminus similar to that found in many other colicins. Part of the glycine-rich domain of colicin N could be replaced by an unrelated sequence devoid of glycine residues without affecting either colicin release or activity. The carboxy-terminal half of colicin N exhibits significant homology to the C-terminus of colicin A. The latter colicin forms pores in the cytoplasmic membrane of Escherichia coli, thereby depolarizing the membrane and causing cell death. The C-terminus of colicin A is endowed with this catalytic activity. Although colicin N was previously found to cause lysis of Escherichia coli cells, a more detailed investigation revealed that it too depolarizes the Escherichia coli cytoplasmic membrane and that lysis is a secondary effect.

Primary structure of colicin M, an inhibitor of murein biosynthesis

The DNA sequence of the colicin M activity gene cma was determined. A polypeptide consisting of 271 amino acids was deduced from the nucleotide sequence. The amino acid sequence agreed with the peptide sequences determined from the isolated colicin. The molecular weight of active colicin M was 29,453. The primary translation product was not processed. In the domain required for uptake into cells, colicin M contained the pentapeptide Glu-Thr-Leu-Thr-Val. A similar sequence was found in all colicins which are taken up by a TonB-dependent mechanism and in outer membrane receptor proteins which are constituents of TonB-dependent transport systems. The structure of colicin M in the carboxy-terminal activity domain had no resemblance to the pore-forming colicins or colicins with endonuclease activity. Instead, the activity domain contained a sequence which exhibited homology to the sequence around the serine residue in the active site of penicillin-binding proteins of Escherichia coli. The colicin M activity gene was regulated from an SOS box upstream of the adjacent colicin B activity gene on the natural plasmid pColBM-Cl139.

Nucleotide sequence of the colicin B activity gene cba: consensus pentapeptide among TonB-dependent colicins and receptors

Colicin B formed by Escherichia coli kills sensitive bacteria by dissipating the membrane potential through channel formation. The nucleotide sequence of the structural gene (cba) which encodes colicin B and of the upstream region was determined. A polypeptide consisting of 511 amino acids was deduced from the open reading frame. The active colicin had a molecular weight of 54,742. The carboxy-terminal amino acid sequence showed striking homology to the corresponding channel-forming region of colicin A. Of 216 amino acids, 57% were identical and an additional 19% were homologous. In this part 66% of the nucleotides were identical in the colicin A and B genes. This region contained a sequence of 48 hydrophobic amino acids. Sequence homology to the other channel-forming colicins, E1 and I, was less pronounced. A homologous pentapeptide was detected in colicins B, M, and I whose uptake required TonB protein function. The same consensus sequence was found in all outer membrane proteins involved in the TonB-dependent uptake of iron siderophores and of vitamin B12. Upstream of cba a sequence comprising 294 nucleotides was identical to the sequence upstream of the structural gene of colicin E1, with the exception of 43 single-nucleotide replacements, additions, or deletions. Apparently, the region upstream of colicins B and E1 and the channel-forming sequences of colicins A and B have a common origin.

Characterization of a bacteriocinogenic plasmid from Clostridium perfringens and molecular genetic analysis of the bacteriocin-encoding gene

The bacteriocinogenic plasmid pIP404 from Clostridium perfringens was isolated and cloned in Escherichia coli, and its physical map was deduced. Expression of the bcn gene, encoding bacteriocin BCN5, is inducible by UV irradiation of C. perfringens and thus resembles the SOS-regulated bacteriocin genes of enteric bacteria. The location of bcn on pIP404 was established by a dot-blot procedure, using specific hybridization probes to analyze mRNA samples from induced and uninduced cultures. From the nucleotide sequence of its gene, the molecular weight of BCN5 was deduced to be 96,591, and a protein of this size was secreted by bacteriocin-producing cultures of C. perfringens. The primary structure of the protein suggests that it may function as an ionophore, since a hydrophobic domain, resembling those of the ionophoric colicins, is present at the COOH terminus. No bacteriocin activity could be detected in E. coli harboring plasmids bearing the bcn gene, even when the transcriptional and translational signals were replaced by those of lacZ. A possible explanation may be found in the unusual codon usage of the adenine-thymine-rich bcn gene, as this shows a preference for codons with a high adenine-plus-thymine content, especially in the wobble position. Many of the frequently used codons correspond to those recognized by minor tRNA species in E. coli. Consequently, bcn expression might be limited by tRNA availability in this bacterium.

Gating of a voltage-dependent channel (colicin E1) in planar lipid bilayers: the role of protein translocation

The voltage-dependent channel formed in planar lipid bilayers by colicin E1, or its channel-forming C-terminal fragments, is susceptible to destruction by the nonspecific protease pepsin under well-defined conditions. In particular, pepsin acts only from the cis side (the side to which colicin has been added) and only upon channels in the closed state. Channels in the open state are refractory to destruction by cis pepsin, and neither open nor closed channels are destroyed by trans pepsin. Colicin E1 channels are normally turned on by cis positive voltages and turned off by cis negative voltages. For large (greater than 80 mV) positive voltages, however, channels inactivate subsequent to opening. Associated with the inactivated state, some channels become capable of being turned on by cis negative voltages and turned off by cis positive voltages, as if the channel-forming region of the molecule has been translocated across the membrane. Consistent with this interpretation is the ability now of trans pepsin to destroy these "reversed" channels when they are closed, but not when they are open, whereas cis pepsin has no effect on them in either the open or closed state. Our results indicate that voltage gating of the E1 channel involves translocation of parts of the protein across the membrane, exposing different domains to the cis and trans solutions in the different channel states.

A new cell division operon in Escherichia coli

At 76 min on the E. coli genetic map there is a cluster of genes affecting essential cellular functions, including the heat shock response and cell division. A combination of in-vivo and in-vitro genetic analysis of cell division mutants suggests that the cell division gene fts E is the second gene in a 3 gene operon. A cold-sensitive mutant, defective in the third gene, is also unable to divide at the restrictive temperature, and we designate this new cell division gene fts X. Another cell division gene, fts S, is very close to, but distinct from, the 3 genes of the operon. The fts E product is a 24.5 Kd polypeptide which shows strong homology with a small group of proteins involved in transport. Both the fts E product and the protein coded by the first gene (fts Y) in the operon have a sequence motif found in a wide range of heterogeneous proteins, including the Ras proteins of yeast. This common domain is indicative of a nucleotide-binding site.

DNA and amino acid sequence analysis of structural and immunity genes of colicins Ia and Ib

The nucleotide sequences for colicin Ia and colicin Ib structural and immunity genes were determined. The two colicins each consist of 626 amino acid residues. Comparison of the two sequences along their lengths revealed that the two colicins are nearly identical in the N-terminal 426 amino acid residues. The C-terminal 220 amino acid residues of the colicins are only 60% identical, suggesting that this is the region most likely recognized by their cognate immunity proteins. The predicted proteins for the colicin immunity proteins would contain 111 amino acids for the colicin Ia immunity protein and 115 amino acids for the colicin Ib immunity protein. The colicin immunity proteins have no detectable DNA or amino acid homology but do exhibit a conservation of overall hydrophobicity. The colicin immunity genes lie distal to and in opposite orientation to the colicin structural genes. The colicin Ia immunity protein was purified to apparent homogeneity by a combination of isoelectric focusing and preparative sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The N-terminal amino acid sequence of the purified Ia immunity protein was determined and was found to be in perfect agreement with that predicted from the DNA sequence of its structural gene. The Ia immunity protein is not a processed membrane protein.

The complete nucleotide sequence of the bacteriocinogenic plasmid CloDF13

The complete nucleotide sequence of the bacteriocinogenic plasmid CloDF13 has been determined. The plasmid consists of 9957 base pairs (molecular weight 6.64 X 10(6] with a GC content of 54.4%. At this moment 16 identified biological functions can be assigned to the primary structure of the CloDF13 DNA. The functions include those of eight protein encoding genes, two untranslated RNA species, and six DNA sites. We discuss these functions in relation to the structure of CloDF13 DNA. For convenience we have divided the CloDF13 genome into five defined regions: region I (origin of vegetative replication, priming and control of replication, type I incompatibility), region II (cloacin DF13, cloacin immunity, cloacin release, cloacin operon control), region III (double-stranded DNA-phage interaction, type II incompatibility, multimer resolution), region IV (inhibition of male specific RNA phages and transfer of Flac), and region V (mobility proteins, basis of mobility).

A molecular genetic approach to the functioning of the immunity protein to colicin A

A plasmid (pColAF1), derived from pColA, and lacking the region encoding Cai (colicin A immunity protein) and Cal (colicin A lysis protein) has been constructed. The strains carrying pColAF1 produce normal amounts of colicin A which remains in the cell cytoplasm and does not result in loss of viability. Similar results have also been obtained for transposon insertion mutants lacking Cai. Structure prediction analysis indicates that four peptide regions of Cai might span the cytoplasmic membrane. Since the NH2- and COOH-terminal regions are charged, this analysis suggests a topology of the 178 residues polypeptide chain in which regions 38 to 70 and 124 to 143 might be exposed at the outer side of the cytoplasmic membrane. With mutants constructed using recombinant DNA techniques, we could demonstrate that the removal of a 30 residue COOH-terminal region, and mutations altering the surface exposed loop comprised of aminoacid residues 124-143 abolish the protecting function of Cai.

A molecular, genetic and immunological approach to the functioning of colicin A, a pore-forming protein

We have constructed, by recombinant DNA techniques, one hybrid protein, colicin A-beta-lactamase (P24), and two modified colicin As, one (P44) lacking a large central domain and the other (PX-345) with a different C-terminal region. The regulation of synthesis, the release into the medium and the properties of these proteins were studied. Only P44 was released into the medium. This suggests that both ends of the colicin A polypeptide chain might be required for colicin release. None of the three proteins was active on sensitive cells in an assay in vivo. However, P44 was able to form voltage-dependent channels in phospholipid planar bilayers. Its lack of activity in vivo is therefore probably caused by the inability to bind to the receptor in the outer membrane. PX-345 is a colicin in which the last 43 amino acids of colicin A have been replaced by 27 amino acids encoded by another reading frame in the same region of the colicin A structural gene; it was totally unable to form pores in planar bilayers at neutral pH but showed a very slight activity at acidic pH. These results confirm that the C-terminal domain of colicin A is involved in pore formation and indicate that at least the 43 C-terminal amino acid residues of this domain play a significant role in pore formation or pore function. Fifteen monoclonal antibodies directed against colicin A have been isolated by using conventional techniques. Five out of the 15 monoclonal antibodies could preferentially recognize wild-type colicin A. In addition, the altered forms of the colicin A polypeptide were used to map the epitopes of ten monoclonal antibodies reacting specifically with colicin A. Some of the antibodies did not bind to colicin A when it was pre-incubated at acidic pH suggesting that colicin A undergoes conformational change at about pH 4. The effects of monoclonal antibodies on activity in vivo of colicin A were investigated. The degree of inhibition observed was related to the location of the epitopes, with monoclonal antibodies reacting with the N terminus giving greater inhibition. The monoclonal antibodies directed against the C-terminal region promoted an apparent activation of colicin activity in vivo.