Identification of a non-junction phosphodiester that influences an autolytic processing reaction of RNA

Two-metal-ion mechanism for hammerhead-ribozyme catalysis

The hammerhead ribozyme is one of the best studied ribozymes, but it still presents challenges for our understanding of RNA catalysis. It catalyzes a transesterification reaction that converts a 5',3' diester to a 2',3' cyclic phosphate diester via an S(N)2 mechanism. Thus, the overall reaction corresponds to that catalyzed by bovine pancreatic ribonuclease. However, an essential distinguishing aspect is that metal ions are not involved in RNase catalysis but appear to be important in ribozymes. Although various techniques have been used to assign specific functions to metals in the hammerhead ribozyme, their number and roles in catalysis is not clear. Two recent theoretical studies on RNA catalysis examined the reaction mechanism of a single-metal-ion model. A two-metal-ion model, which is supported by experiment and based on ab initio and density functional theory calculations, is described here. The proposed mechanism of the reaction has four chemical steps with three intermediates and four transition states along the reaction pathway. Reaction profiles are calculated in the gas phase and in solution. The early steps of the reaction are found to be fast (with low activation barriers), and the last step, corresponding to the departure of the leaving group, is rate limiting. This two-metal-ion model differs from the models proposed previously in that the two metal ions function not only as Lewis acids but also as general acids/bases. Comparison with experiment shows good agreement with thermodynamic and kinetic data. A detailed analysis based on natural bond orbitals (NBOs) and natural energy decomposition (NEDA) provides insights into the role of metal ions and other factors important for catalysis.

Functional hammerhead ribozymes naturally encoded in the genome of Arabidopsis thaliana

The hammerhead ribozyme (HHRz) is an autocatalytic RNA motif found in subviral plant pathogens and transcripts of repetitive DNA sequences in animals. Here, we report the discovery and characterization of unique HHRzs encoded in a plant genome. Two novel sequences were identified on chromosome IV of Arabidopsis thaliana in a database search, which took into account recently defined structural requirements. The HHRzs are expressed in several tissues and coexist in vivo as both cleaved and noncleaved species. In vitro, both sequences cleave efficiently at physiological Mg(2+) concentrations, indicative of functional loop-loop interactions. Kinetic analysis of loop nucleotide variants was used to determine a three-dimensional model of these tertiary interactions. Based on these results, on the lack of infectivity of hammerhead-carrying viroids in Arabidopsis, and on extensive sequence comparisons, we propose that the ribozyme sequences did not invade this plant by horizontal transfer but have evolved independently to perform a specific, yet unidentified, biological function.

[Spectroscopic analyses of the interaction between hammerhead ribozymes and metal ions]

Biologically active RNA molecules utilize metal ions to fold into specific conformations or to form a catalytic center. Hammerhead ribozymes also contain a metal ion-binding motif in their conserved core region. This motif and bound metal ions have recently been focused on from the viewpoint of whether the metal ions are a catalytic metal or a structural metal. We studied the interaction between metal ions and an RNA oligomer, r(GGACGAGUCC), which mimics the metal ion-binding motif of hammerhead ribozymes, using NMR spectroscopy in solution. Using 15N-labeled RNA oligomers, the chemical shift of N7 of the G7 residue [N7(G7)] in the metal ion-binding motif was specifically perturbed upon the addition of Cd(II). It was also found that the 31P resonance of the phosphate of the A9 residue showed the largest perturbation of all the 31P resonances during titration. These data indicate that divalent cations can bind to the metal ion-binding motif in solution, and that the binding sites for cations are N7(G7) and the phosphate of A9. More importantly, the metal ion-binding motif is an independent functional module that can capture divalent cations without the assistance of other conserved residues in hammerhead ribozymes.

Significant activity of a modified ribozyme with N7-deazaguanine at g10.1: the double-metal-ion mechanism of catalysis in reactions catalysed by hammerhead ribozymes

BACKGROUND

Several reports have appeared recently of experimental evidence for a double-metal-ion mechanism of catalysis in reactions catalysed by hammerhead ribozymes. In one case, hammerhead ribozyme-mediated cleavage was analysed as a function of the concentration of La3+ ions in the presence of a fixed concentration of Mg2+ ions so that the role of metal ions that are directly involved in the cleavage reaction could be monitored. The resultant bell-shaped curve for activation of cleavage was used to support the proposed double-metal-ion mechanism of catalysis. However, other studies have demonstrated that the binding of a metal ion (the most conserved P9 metal ion) to the pro-Rp oxygen (P9 oxygen) of the phosphate moiety of nucleotide A9 and to the N7 of nucleotide G10.1 is critical for efficient catalysis, despite the large distance ( approximately 20 A) between the P9 metal ion and the labile phosphodiester group in the ground state. In fact, it was demonstrated that an added Cd2+ ion binds first to the pro-Rp phosphoryl P9 oxygen but not with the pro-Rp phosphoryl oxygen at the cleavage site.

RESULTS

In earlier discussions, it was difficult to completely exclude the possibility that La3+ ions might have replaced the P9 metal ion and, as a result, created conditions represented by the bell-shaped curve. In order to clarify this situation, we examined a chemically synthesized hammerhead ribozyme (7-deaza-R34) that included a minimal modification, namely, an N7-deazaguanine residue in place of G10.1. We compared the kinetic properties of this ribozyme with those of the parental ribozyme (R34). Kinetic analysis revealed that, unlike the cases of added Cd2+ ions, the added La3+ ions did not replace the pre-existing P9 metal ion, and that the replacement of N7 by C7 at G10.1 reduced the catalytic activity to a limited extent. This result indicates that the binding of a Mg2+ ion to N7 at G10.1 is catalytically important but not indispensable. Most importantly, 7-deaza-R34 also yielded a bell-shaped curve upon addition of La3+ ions to the reaction mixture.

CONCLUSIONS

Since the data based on our experiments with 7-deaza-R34 are completely free from potential artefacts, due to the binding of a La3+ ion to N7 at G10.1, our results, that 7-deaza-R34 yielded a bell-shaped curve following the addition of La3+ ions to the Mg2+-background reaction mixture, strongly supports the proposal that a double-metal-ion mechanism is operative in the cleavage reaction which is catalysed by hammerhead ribozymes.

Effects of cetyltrimethylammonium bromide on reactions catalyzed by maxizymes, a novel class of metalloenzymes

We demonstrated previously that some shortened forms of hammerhead ribozymes had high cleavage activity that was similar to that of the wild-type parental hammerhead ribozyme. Moreover, the active species appeared to form dimeric structures with a common stem II (in order to distinguish monomeric forms of conventional minizymes that have low activity from our novel dimers with high-level activity, the latter very active short ribozymes were designated 'maxizymes'). The dimers can be homodimeric (with two identical binding sequences) or heterodimeric (with two different binding sequences). In the case of heterodimers, they are in equilibrium with inactive homodimers. In this study, we investigated the effects of cationic detergent, cetyltrimethylammonium bromide (CTAB), on reactions catalyzed by a variety of maxizymes. The slope of close to unity in profiles of pH versus rate demonstrated that the deprotonation was important in catalysis and that the rate-limiting chemical step was followed in these reactions. Addition of appropriate amounts of CTAB enhanced the activity of a variety of maxizymes. The activity of our least stable, least active maxizyme was enhanced 100-fold by CTAB. Thus, CTAB effectively enhanced the conversion of kinetically trapped inactive conformations to active forms. Moreover, we suggest that the activity and specificity of catalytic RNAs in vivo might be better estimated if their reactions are monitored in vitro in the presence of appropriate amounts of CTAB.

Towards a new concept of gene inactivation: specific RNA cleavage by endogenous ribonuclease P

In the first part of this chapter, general concepts for gene inactivation, antisense techniques and catalytic RNAs (ribozymes) are presented. The requirements for modified oligonucleotides are discussed with their effects on the stability of base-paired hybrids and on resistance against nuclease attack. This also includes the problems in the choice of an optimal target sequence within the inactivated RNA and the options of cellular delivery systems. The second part describes the recently introduced antisense concept based on the ubiquitous cellular enzyme ribonuclease P. This system is unique, since the substrate recognition requires the proper tertiary structure of the cleaved RNA. General properties and possible advantages of this approach are discussed.

Involvement of a specific metal ion in the transition of the hammerhead ribozyme to its catalytic conformation

Previous crystallographic and biochemical studies of the hammerhead ribozyme suggest that a metal ion is ligated by the pro-Rp oxygen of phosphate 9 and by N7 of G10.1 and has a functional role in the cleavage reaction. We have tested this model by examining the cleavage properties of a hammerhead containing a unique phosphorothioate at position 9. The Rp-, but not Sp-, phosphorothioate reduces the cleavage rate by 10(3)-fold, and the rate can be fully restored by addition of low concentrations of Cd2+, a thiophilic metal ion. These results strongly suggest that this bound metal ion is critical for catalysis, despite its location approximately 20 A from the cleavage site in the crystal structure. Analysis of the concentration dependence suggests that Cd2+ binds with a Kd of 25 microM in the ground state and a Kd of 2.5 nM in the transition state. The much stronger transition state binding suggests that the P9 metal ion adopts at least one additional ligand in the transition state and that this metal ion may participate in a large scale conformational change that precedes hammerhead cleavage.

Differences in the phosphate oxygen requirements for self-cleavage by the extended and prototypical hammerhead forms

The hammerhead self-cleaving motif occurs in a variety of RNAs that infect plants and consists of three non-conserved helices connected by a highly conserved central core. A variant hammerhead, called the extended hammerhead, is found in satellite 2 transcripts from a variety of caudate amphibians. The extended hammerhead has the same core as the prototypical hammerhead, but has unusually conserved sequence and structural elements in its peripheral helices. Here we present the results of a thiophosphate substitution interference analysis of the pro-Rp phosphate oxygen requirements in the two hammerhead forms. Five pro-Rp phosphate oxygens, all in the central core, were found to be important for self-cleavage by the prototypical hammerhead. A similar set of core positions were important for self-cleavage by the extended hammerhead, but five non-core positions were also found to be important. Thiosubstitution at one of these positions had the most severe effect on self-cleavage observed in this analysis. Mn2+ did not alleviate this negative effect, indicating that this position was not part of a divalent cation binding site. We propose that novel tertiary interactions in the extended hammerhead help form the same catalytic core structure as that used by the prototypical plant virus hammerhead.

Mechanistic aspects of enzymatic catalysis: lessons from comparison of RNA and protein enzymes

A classic approach in biology, both organismal and cellular, is to compare morphologies in order to glean structural and functional commonalities. The comparative approach has also proven valuable on a molecular level. For example, phylogenetic comparisons of RNA sequences have led to determination of conserved secondary and even tertiary structures, and comparisons of protein structures have led to classifications of families of protein folds. Here we take this approach in a mechanistic direction, comparing protein and RNA enzymes. The aim of comparing RNA and protein enzymes is to learn about fundamental physical and chemical principles of biological catalysis. The more recently discovered RNA enzymes, or ribozymes, provide a distinct perspective on long-standing questions of biological catalysis. The differences described in this review have taught us about the aspects of RNA and proteins that are distinct, whereas the common features have helped us to understand the aspects that are fundamental to biological catalysis. This has allowed the framework that was put forth by Jencks for protein catalysts over 20 years ago (1) to be extended to RNA enzymes, generalized, and strengthened.

Importance of specific adenosine N3-nitrogens for efficient cleavage by a hammerhead ribozyme

Five modified hammerhead ribozyme/substrate complexes have been prepared in which individual adenosine N3-nitrogens have been excised and replaced with carbon. The modified complexes were chemically synthesized with the substitution of a single 3-deazzaadenosine (c3A) base analogue for residues A6, A9, A13, A14, or A15.1. Steady-state kinetic analyses indicate that the cleavage efficiencies, as measured by kcat/K(M), for the c3A6, c3A9, and c3A14 complexes were only marginally reduced (< or = 5-fold) relative to the native complex. By comparison, the cleavage efficiencies for the c3A13 and c315.1 complexes were reduced by 9-fold and 55-fold, respectively. these reductions in cleavage efficiency are primarily a result of lower kcat values. Profiles of pH and cleavage rate suggest that the chemical cleavage step is the rate-limiting reaction for these complexes. These results suggest that the N3-nitrogen of the A13 residue and particularly the A15.1 residue in the hammerhead ribozyme/substrate complex are critical for transition state stabilization and efficient cleavage activity. We have additionally compared the locations of these critical functional groups, as well as those identified from other studies, with recent crystallographic analyses. In some cases, the critical functional groups are clustered around proposed metal binding sites and may reflect functional groups critical for binding the metal cofactor. In other cases, clusters of functional groups may form a network of hydrogen bonds necessary for transition state stabilization.

Can hammerhead ribozymes be efficient tools to inactivate gene function?

In order to improve hammerhead ribozyme efficiency and specificity, we have analyzed, both in vitro and in vivo, the activity of a series of ribozyme/substrate combinations that have the same target sequence but differ in the length of the ribozyme/substrate duplex or in their structure, i.e., the total length of the RNA. In vitro, we have found that optimal kcat/Km (at 37 degrees C) is obtained when the ribozyme/substrate duplex has a length of 12 bases, which according to the base composition represents a calculated free energy of binding of -16 kcal/mol. We discuss the importance of this value for ribozyme specificity and present strategies that may improve it. Increasing the length of the duplex from 14 to 17 bases (from -19 to -26 kcal/mol) produces a reduced ribozyme activity which is probably due to a slower rate of product dissociation. In addition, inclusion of either the substrate or the ribozyme in a long transcript produces a reduction (10 fold) of the kcat/Km, probably because of a different accessibility of the target sequence. In vivo, the activity of the trans-acting ribozyme was extremely low and detected in only one case: with a ribozyme/substrate duplex length of 13 bases and with both ribozyme and substrate embedded in short RNAs expressed at a very high level. The similarity of the results obtained in vitro and in vivo indicates that it is possible to use an in vitro system to optimize ribozymes which are to be used in vivo. Satisfactory results were obtained in vivo only with cisacting ribozymes. Altogether these results suggest that the ribozyme/substrate hybridization step is the limiting step in vivo and therefore it is not clear if ribozymes represent an improvement over antisense RNAs.

Modification interference approach to detect ribose moieties important for the optimal activity of a ribozyme

A new approach for modification interference studies is presented. It involves the use of phosphorothioates as a handle to analyze any desired base or sugar modification. This method was applied to identify ribose and phosphate moieties which could be important in the pre-tRNA recognition of E. coli RNase P RNA (M1 RNA). The utility of this technique was confirmed by detecting the inhibitory effect of a deoxyribose in the 5'-flank (position-1). This site was already known to interfere with RNase P cleavage, if modified. We have analyzed pre-tRNA(Tyr) and pre-tRNA(Phe) and found different interference patterns for both tRNAs. Two unpaired regions were involved in both pre-tRNAs. Phosphorothioates interfered at the transition between acceptor- and D-arms. The results with deoxythymidines in the T-loop indicated that deoxyribose moieties or the extra methyl group in thymidine could interfere with RNAse P cleavage. These data suggest that even in complete pre-tRNAs, only a few intact ribonucleotides are important in the substrate recognition by RNase P. We have demonstrated the potential of this new approach which offers many future applications in all fields involving nucleic acids, for example RNA processing, action of ribozymes, tRNA charging and studies related to DNA promoter recognition.

Enhancement of ribozyme catalytic activity by a contiguous oligodeoxynucleotide (facilitator) and by 2'-O-methylation

RNA catalysts (ribozymes) designed to cleave sequences unique to viral RNA's might be developed as therapeutics. For this purpose, they would require high catalytic efficiency and resistance to nucleases. Reported here are two approaches that can be used in combination to improve these properties. First, catalytic efficiency can be improved by oligonucleotides (facilitators) that bind to the substrate contiguously with the 3'-end of the ribozyme. Second, 2'-O-methylation of flanking sequences of the ribozyme increases catalytic activity as well as resistance to nucleases. In combination with a facilitator oligodeoxynucleotide, the cleavage rate was increased 20 fold over that of the unmodified ribozyme.

Importance of specific purine amino and hydroxyl groups for efficient cleavage by a hammerhead ribozyme

Eight modified ribozymes of 19 residues have been prepared with individual purine amino or hydroxyl groups excised. The modified ribozymes were chemically synthesized with the substitution of a single 2'-deoxyadenosine, 2'-deoxyguanosine, inosine, or purine riboside for residues G10, A11, G13, or A14. Five of the modified ribozymes cleaved the 24-mer substrate with little change in rate as monitored by simple first-order kinetics. However, deletion of the 2-amino group at G10 (replacement with inosine) or deletion of either of the 2'-hydroxyls at G10 or G13 (replacement with 2'-deoxyguanosine) resulted in ribozymes with a drastic decrease in cleavage efficiency. Increasing the concentration of the Mg2+ cofactor from 10 mM to 50 mM significantly enhanced cleavage efficiency by these three derivatives. Steady-state kinetic assays for these three ribozymes indicated that the modifications result in both an increase in Km and a decrease in kcat. These results suggest that the exocyclic amino group at-G10 and the hydroxyls at G10 and G13 are important both for ribozyme-substrate binding and for the Mg(2+)-catalyzed cleavage reaction.

The role of the exocyclic amino groups of conserved purines in hammerhead ribozyme cleavage

A series of 2 stranded hammerhead ribozymes has been synthesized in which single conserved adenosine residues have been replaced by nebularine or single guanosine residues by inosine. Comparison of the rates of trans-cleavage for the modified structures suggests the presence of interstrand non-Watson-Crick hydrogen bonding interactions including a GA:AG double mismatch. The exocyclic amino group of one of the guanosine residues is essential for cleavage.

RNA structure and NMR spectroscopy

RNA molecules perform a wide variety of biological functions, from enzymic activity to storage and propagation of genetic information.

Study of a hammerhead ribozyme containing 2'-modified adenosine residues

The improved synthesis of 2'-fluoro-2'-deoxyadenosine (2'-FA) starting from adenosine is described. This compound was converted to the phosphoramidite and incorporated into a hammerhead ribozyme RNA with the use of automated RNA synthesis techniques. Ribozymes containing 2'-deoxy-adenosine (2'-dA) were prepared in a similar manner. A kinetic rate comparison of the unmodified ribozyme with two ribozymes that had every adenosine replaced with 2'FA or 2'-dA revealed a large decrease in catalytic efficiency (kcat/Km) for the modified ribozymes resulting from a drop in kcat. The kinetic analysis of a number of partially substituted 2'-FA or 2'-dA containing hammerheads revealed that the decrease in activity was not associated with any particular residue but was the result of the accumulation of modified nucleosides within the structure.

Phosphorothioate-containing RNAs show mRNA activity in the prokaryotic translation systems in vitro

Phosphorothioate-containing RNAs were generated by transcription of coliphage T7 DNA using the Sp diastereomers of ribonucleoside 5'-O-(1-thiotriphosphates) and T7 RNA polymerase. RNAs in which a single nucleotide was substituted by the corresponding nucleoside phosphorothioate functioned as mRNA in the cell-free translation systems prepared from Escherichia coli and from an extreme thermophilic bacterium, Thermus thermophilus. This substitution increased the efficiency of protein synthesis by stabilizing the mRNAs in these systems. As the proportion of substituted nucleotides was increased, their mRNA activity was decreased accordingly. As judged from the analysis by SDS-polyacrylamide gel-electrophoresis, the proteins synthesized using phosphorothioate-containing mRNAs as template were identical to those obtained with unsubstituted mRNAs. However, larger proteins which were barely detectable when unsubstituted mRNA was used were well represented when phosphorothioate-RNA was used instead. The advantages in using the phosphorothioate-mRNAs in the in vitro translation systems are discussed.