A new method for the synthesis of a structural gene

A PCR-free rapid protocol for one-pot construction of highly diverse genetic libraries

In vitro protein display methods can access extensive libraries (e.g., 1012-1014) and play an increasingly important role in protein engineering. However, the preparation of large libraries remains a laborious and time-consuming process. Here we report an efficient one-pot ligation & elongation (L&E) method for sizeable synthetic library preparation free of PCR amplification or any purification steps. As a proof of concept, we constructed an ankyrin repeat protein templated synthetic library with 1011 variants in 150 μL volume. The entire process from the oligos to DNA template ready for transcription is linearly scalable and took merely 90 minutes. We believe this L&E method can significantly simplify the preparation of synthetic libraries and accelerate in vitro protein display experiments.

A rapid and simple method for DNA engineering using cycled ligation assembly

DNA assembly techniques have developed rapidly, enabling efficient construction of complex constructs that would be prohibitively difficult using traditional restriction-digest based methods. Most of the recent methods for assembling multiple DNA fragments in vitro suffer from high costs, complex set-ups, and diminishing efficiency when used for more than a few DNA segments. Here we present a cycled ligation-based DNA assembly protocol that is simple, cheap, efficient, and powerful. The method employs a thermostable ligase and short Scaffold Oligonucleotide Connectors (SOCs) that are homologous to the ends and beginnings of two adjacent DNA sequences. These SOCs direct an exponential increase in the amount of correctly assembled product during a reaction that cycles between denaturing and annealing/ligating temperatures. Products of early cycles serve as templates for later cycles, allowing the assembly of many sequences in a single reaction. To demonstrate the method’s utility, we directed the assembly of twelve inserts, in one reaction, into a transformable plasmid. All the joints were precise, and assembly was scarless in the sense that no nucleotides were added or missing at junctions. Simple, efficient, and low-cost cycled ligation assemblies will facilitate wider use of complex genetic constructs in biomedical research.

Patch oligodeoxynucleotide synthesis (POS): a novel method for synthesis of long DNA sequences and full-length genes

Synthesis of long DNA fragments is often associated with mutations and requires multiple DNA manipulation steps. A novel DNA synthesis method, referred to as patch oligodeoxynucleotide synthesis (POS) to assembly long DNA fragments is presented here. This method involves connection of two types of oligodeoxynucleotides: long constructional oligonucleotides (COs) and short patch oligonucleotides (POs). Long COs were connected by a ligase with the aid of POs, which were complementary to both adjacent COs to help remove secondary structures during assembly. The partial double-stranded DNA template that was formed was then amplified by PCR. Accordingly, we synthesized SV40 polyadenylation signal sequences (187 bp), a codon-optimized yellow fluorescent protein gene (678 bp), and Rattus norvegicus catenin β1 (2,352 bp). This presented method can be broadly applied to synthesize DNA fragments of varying lengths with great convenience.

Gene synthesis: methods and applications

DNA synthesis techniques and technologies are quickly becoming a cornerstone of modern molecular biology and play a pivotal role in the field of synthetic biology. The ability to synthesize whole genes, novel genetic pathways, and even entire genomes is no longer the dream it was 30 years ago. Using little more than a thermocycler, commercially synthesized oligonucleotides, and DNA polymerases, a standard molecular biology laboratory can synthesize several kilobase pairs of synthetic DNA in a week using existing techniques. Herein, we review the techniques used in the generation of synthetic DNA, from the chemical synthesis of oligonucleotides to their assembly into long, custom sequences. Software and websites to facilitate the execution of these approaches are explored, and applications of DNA synthesis techniques to gene expression and synthetic biology are discussed. Finally, an example of automated gene synthesis from our own laboratory is provided.

DNA suspension arrays: silencing discrete artifacts for high-sensitivity applications

Detection of low frequency single nucleotide polymorphisms (SNPs) has important implications in early screening for tumorgenesis, genetic disorders and pathogen drug resistance. Nucleic acid arrays are a powerful tool for genome-scale SNP analysis, but detection of low-frequency SNPs in a mixed population on an array is problematic. We demonstrate a model assay for HIV-1 drug resistance mutations, wherein ligase discrimination products are collected on a suspension array. In developing this system, we discovered that signal from multiple polymorphisms was obscured by two discrete hybridization artifacts. Specifically: 1) tethering of unligated probes on the template DNA elicited false signal and 2) unpredictable probe secondary structures impaired probe capture and suppressed legitimate signal from the array. Two sets of oligonucleotides were used to disrupt these structures; one to displace unligated reporter labels from the bead-bound species and another to occupy sequences which interfered with array hybridization. This artifact silencing system resulted in a mean 21-fold increased sensitivity for 29 minority variants of 17 codons in our model assay for mutations most commonly associated with HIV-1 drug resistance. Furthermore, since the artifacts we characterized are not unique to our system, their specific inhibition might improve the quality of data from solid-state microarrays as well as from the growing number of multiple analyte suspension arrays relying on sequence-specific nucleic acid target capture.

Properties of hybrid enzymes between Synechococcus large subunits and higher plant small subunits of ribulose-1,5-bisphosphate carboxylase/oxygenase in Escherichia coli

To explore the function of small subunits of Rubisco, three hybrid enzymes were synthesized in Escherichia coli by construction of a transcriptionally coupled expression system in which the synthetic small subunit gene of rice, tobacco, and wheat, respectively, was cloned downstream from the large subunit gene of Synechococcus sp. PCC6301. These coexpression products were detected by utilizing SDS-PAGE and confirmed by immunoblotting. The amount of carboxylase activity from the intact cells revealed that each higher plant small subunit was able to assemble with the Synechococcus large subunit octamer core to form an active heterologous enzyme in E. coli. However, in these heterologous enzymes, the interaction between large subunits and small subunits was very weak, the small subunit readily dissociated from the large subunit octamer core. A detailed kinetic assay was carried out with the partially purified hybrid enzymes. Compared to Synechococcus Rubisco, the activity of rice, tobacco, and wheat hybrid Rubisco decreased to 37, 61, and 37% of the original activity, respectively. These hybrid enzymes showed a greater affinity for CO2 and RuBP than Synechococcus Rubisco. The specificity factor of the three hybrid Rubiscos was 98, 84, and 76%, respectively, of the original. These results indicate for the first time that the small subunit contributes to the stability, catalytic efficiency, and CO2/O2 specificity of Rubisco together, which suggests that small subunits may be fruitful targets for engineering an improved Rubisco. Meanwhile, we found that sorbitol in the culture of induced cells promoted the production of active assembled enzyme and shortened the time to reach maximal expression.

Two-cistron system overexpression of chloroplast glyceraldehyde-3-phosphate dehydrogenase subunit B and B-derivatives from spinach in Escherichia coli

A gene coding for the subunit B (GapB) of chloroplast glyceraldehyde-3-phosphate dehydrogenase from spinach and its two derivatives (GapBc) lacking the GapB-specific C-terminal extension have been cloned by RT-PCR. These three genes have been overexpressed with full activity in Escherichia coli when a two-cistron expression system controlled by an inducible promoter P(trc) is used. With a suitable base composition of the first cistron, the expression level of GapB and the derivatives GapBc are expressed up to 15-20% of the total cell protein and around 20 mg of recombinant GapBcs with full activity are purified from 1 liter of cultured bacteria. The specific activity of the two derivatives GapBc (40-60 u/mg) is similar to that of GapA (50-70 u/mg) and lower than that of reported GapBc derivative (E. Baalmann, R. Scheibe, R. Cerff, and W. Martin, 1996, Plant Mol. Biol. 32, 505-513).

Overexpression in Escherichia coli and characterization of the chloroplast fructose-1,6-bisphosphatase from wheat

An important Calvin cycle enzyme, chloroplast fructose-1, 6-bisphosphatase (FBPase) from wheat, has been cloned and expressed up to 15% of the total cell protein using a pPLc expression vector in Escherichia coli by replacing the codons in the 5'-terminal encoding sequence with optimal and A/T-rich ones. The overexpressed wheat FBPase is soluble, fully active, and heat stable. It can be purified by chromatography in turn on DEAE-Sepharose and Sephacryl S-200, and around 15 mg of purified enzymes (>95%) is obtained from 1 liter of cultured bacteria. Its special activity is 8.8 u/mg, K(cat) is 22.9/S, K(m) is 121 microM, and V(max) is 128 micromol/min. mg. The recombinant FBPase can be activated by DTT, Na(+), or low concentrations of Li(+), Ca(2+), Zn(2+), GuHCl, and urea, while it can be inhibited by K(+) or NH(+)(4).

Overexpression in Escherichia coli and characterization of the chloroplast triosephosphate isomerase from spinach

An important Calvin cycle enzyme, chloroplast triosephosphate isomerase (cpTPI) from spinach, has been cloned and expressed in up to 15% of the total cell protein using the P(L) expression vector in Escherichia coli. An even higher level expression, up to 36% of the total protein, was achieved by replacing the nucleotide sequence between the ribosomal binding site and the initial codon, ATG, with an AT-rich sequence. Computer modeling revealed that the moderate change in the standard free energy (5'-DeltaG degrees ) of mRNA secondary structure in the translation initial region might be the major factor which led to the later high-level expression. The overexpressed spinach cpTPI was soluble and fully active and was able to be purified beyond 95% purity by DEAE-Sepharose and Sephadex G-75, and around 55 mg of purified enzymes was obtained from 1 liter of cultured bacteria. With d-glyceraldehyde 3-phosphate as substrate, K(m (D-3-P)) is 0. 68 mM, V(max (G-3-P)) is 3.16 x 10(4) micromol/min. mg, and K(cat (G-3-P)) is 4.51 x 10(3)/s; with dihydroxyacetone phosphate as substrate, the corresponding values are 7.27 mM, 1.04 x 10(3) micromol/min. mg, and 1.16 x 10(2)/s, respectively.

Synthetic gene for the hepatitis C virus nucleocapsid protein

A synthetic gene encoding the hepatitis C virus (HCV) nucleocapsid protein was constructed and expressed in E. coli. To synthesize this gene, we developed a new method that results in the enzymatic synthesis of long polydeoxyribonucleotides from oligodeoxyribonucleotides. The method, designated as the 'Exchangeable Template Reaction' (ETR), uses oligonucleotides as templates for DNA polymerase. A special mechanism was designed to exchange the templates during the polymerase reaction. The mechanism relies on the formation of a single-stranded 3'-protrusion at the 'growing point' of the elongating DNA such that it can be subsequently annealed, in a sequence-specific manner, with the next synthetic oligonucleotide. When annealed to the 3'-protrusion, the added oligonucleotide becomes a template for DNA polymerase, and the protruding 3'-end of the double-stranded DNA is used as the primer. The HCV nucleocapsid gene was assembled with DNA ligase from three fragments synthesized by ETR. The data verify that this method is efficient. The main advantage of ETR is the ability to combine more than two oligonucleotides in one tube together with polymerase and an enzymatic activity that produces a 3'-protrusion (e.g., BstXI) rather than the sequential addition of each component. The data demonstrate that as many as five oligonucleotides can be used simultaneously, resulting in a synthesized DNA fragment of designed sequence. The synthetic gene expressed in E. coli produced a 27 kDa protein that specifically interacted with antibodies from sera obtained from HCV-infected individuals.

Ligation-free gene synthesis by PCR: synthesis and mutagenesis at multiple loci of a chimeric gene encoding OmpA signal peptide and hirudin

A unique kination and ligation-free method that allows de novo synthesis of a gene through a novel application of polymerase chain reaction (PCR) involving stepwise elongation of sequence (SES) is described. SES-PCR is simple and efficient. Optimal utilization of nucleotides, ability to use only partially purified oligodeoxyribonucleotides, and elimination of kination and ligation of intermediates make SES-PCR-mediated gene synthesis more economical in terms of time, labour and money. Site-directed mutagenesis and/or gene fusion by SES-PCR is not limited by the prior availability of the gene(s) in question. The potentials of this novel method in gene synthesis, mutagenesis at multiple loci of DNA and gene fusion have been demonstrated using a chimeric gene encoding fusion between OmpA signal peptide and hirudin, as an example. The SES-PCR product was cloned and sequencing of positive clones demonstrated the presence of genes with expected sequence and bearing only the desired mutations. A nearly 100% efficiency of mutation was easily achieved by the design of the method.

Synthesis of a wild-type and three mutant Cucurbita maxima trypsin inhibitor-encoding genes by a single-strand approach

A single-strand approach to gene assembly, based on a modification of an in vitro complementary oligodeoxyribonucleotide template-directed ligation of the desired sequence to a linearized vector [Chen et al., Nucleic Acids Res. 18 (1990) 871-878], is described. The gene coding for the wild-type Cucurbita maxima trypsin inhibitor of 29 amino acid residues [Bode et al., FEBS Lett. 242 (1989) 285-292], as well as three mutant forms of the gene, in which two of the three disulfide bonds have been replaced singly or as a pair, have been synthesized in a single synthesis run with minimal manual intervention. Subsequent to ligation to pUC9 and in vivo gapped duplex repair by Escherichia coli, their sequences have been verified.

Synthesis of a gene for human serum albumin and its expression in Saccharomyces cerevisiae

A 1761 base pairs long artificial gene coding for human serum albumin (HSA) has been prepared by a newly developed synthetic approach, resulting in the largest synthetic gene so far described. Oligonucleotides corresponding to only one strand of the HSA gene were prepared by chemical synthesis, while the complementary strand was obtained by a combination of enzymatic and cloning steps. 24 synthetic, 69-85 nucleotides long oligonucleotides covering the major part of the HSA gene (41-1761 nucleotides) were used as building blocks. Generally, four groups of 6-6 such oligonucleotides were successively cloned in pUC19 Escherichia coli vector to obtain about quarters of the gene as large fragments. Joining of these four fragments resulted in a cloned DNA coding for the 13-585 amino acid region of HSA, which was further supplemented with a double-stranded linker sequence coding for the amino terminal 12 amino acids. The completed structural gene composed of frequently used codons in the highly expressed yeast genes was then supplied with yeast regulatory sequences and the HSA expression cassette so obtained was inserted into an Escherichia coli-Saccharomyces cerevisiae shuttle vector. This vector was shown to direct the expression in Saccharomyces cerevisiae of correctly processed, mature HSA which was recognized by antiserum to HSA, and possessed the correct N-terminal amino acid sequence.