Operation of an efficient site-specific recombination system of Zygosaccharomyces rouxii in tobacco cells

Unclasping potentials of genomics and gene editing in chickpea to fight climate change and global hunger threat

Genomics and genome editing promise enormous opportunities for crop improvement and elementary research. Precise modification in the specific targeted location of a genome has profited over the unplanned insertional events which are generally accomplished employing unadventurous means of genetic modifications. The advent of new genome editing procedures viz; zinc finger nucleases (ZFNs), homing endonucleases, transcription activator like effector nucleases (TALENs), Base Editors (BEs), and Primer Editors (PEs) enable molecular scientists to modulate gene expressions or create novel genes with high precision and efficiency. However, all these techniques are exorbitant and tedious since their prerequisites are difficult processes that necessitate protein engineering. Contrary to first generation genome modifying methods, CRISPR/Cas9 is simple to construct, and clones can hypothetically target several locations in the genome with different guide RNAs. Following the model of the application in crop with the help of the CRISPR/Cas9 module, various customized Cas9 cassettes have been cast off to advance mark discrimination and diminish random cuts. The present study discusses the progression in genome editing apparatuses, and their applications in chickpea crop development, scientific limitations, and future perspectives for biofortifying cytokinin dehydrogenase, nitrate reductase, superoxide dismutase to induce drought resistance, heat tolerance and higher yield in chickpea to encounter global climate change, hunger and nutritional threats.

Precise Genome Editing in miRNA Target Site via Gene Targeting and Subsequent Single-Strand-Annealing-Mediated Excision of the Marker Gene in Plants

Gene targeting (GT) enables precise genome modification-e.g., the introduction of base substitutions-using donor DNA as a template. Combined with clean excision of the selection marker used to select GT cells, GT is expected to become a standard, generally applicable, base editing system. Previously, we demonstrated marker excision via a piggyBac transposon from GT-modified loci in rice. However, piggyBac-mediated marker excision has the limitation that it recognizes only the sequence TTAA. Recently, we proposed a novel and universal precise genome editing system consisting of GT with subsequent single-strand annealing (SSA)-mediated marker excision, which has, in principle, no limitation of target sequences. In this study, we introduced base substitutions into the microRNA miR172 target site of the OsCly1 gene-an ortholog of the barley Cleistogamy1 gene involved in cleistogamous flowering. To ensure efficient SSA, the GT vector harbors 1.2-kb overlapped sequences at both ends of a selection marker. The frequency of positive-negative selection-mediated GT using the vector with overlapped sequences was comparable with that achieved using vectors for piggyBac-mediated marker excision without overlapped sequences, with the frequency of SSA-mediated marker excision calculated as ~40% in the T0 generation. This frequency is thought to be adequate to produce marker-free cells, although it is lower than that achieved with piggyBac-mediated marker excision, which approaches 100%. To date, introduction of precise substitutions in discontinuous multiple bases of a targeted gene using base editors and the prime editing system based on CRISPR/Cas9 has been quite difficult. Here, using GT and our SSA-mediated marker excision system, we succeeded in the precise base substitution not only of single bases but also of artificial discontinuous multiple bases in the miR172 target site of the OsCly1 gene. Precise base substitution of miRNA target sites in target genes using this precise genome editing system will be a powerful tool in the production of valuable crops with improved traits.

Insights Into Genetic and Molecular Elements for Transgenic Crop Development

Climate change and the exploration of new areas of cultivation have impacted the yields of several economically important crops worldwide. Both conventional plant breeding based on planned crosses between parents with specific traits and genetic engineering to develop new biotechnological tools (NBTs) have allowed the development of elite cultivars with new features of agronomic interest. The use of these NBTs in the search for agricultural solutions has gained prominence in recent years due to their rapid generation of elite cultivars that meet the needs of crop producers, and the efficiency of these NBTs is closely related to the optimization or best use of their elements. Currently, several genetic engineering techniques are used in synthetic biotechnology to successfully improve desirable traits or remove undesirable traits in crops. However, the features, drawbacks, and advantages of each technique are still not well understood, and thus, these methods have not been fully exploited. Here, we provide a brief overview of the plant genetic engineering platforms that have been used for proof of concept and agronomic trait improvement, review the major elements and processes of synthetic biotechnology, and, finally, present the major NBTs used to improve agronomic traits in socioeconomically important crops.

Site-specific recombinase genome engineering toolkit in maize

Site-specific recombinase enzymes function in heterologous cellular environments to initiate strand-switching reactions between unique DNA sequences termed recombinase binding sites. Depending on binding site position and orientation, reactions result in integrations, excisions, or inversions of targeted DNA sequences in a precise and predictable manner. Here, we established five different stable recombinase expression lines in maize through Agrobacterium-mediated transformation of T-DNA molecules that contain coding sequences for Cre, R, FLPe, phiC31 Integrase, and phiC31 excisionase. Through the bombardment of recombinase activated DsRed transient expression constructs, we have determined that all five recombinases are functional in maize plants. These recombinase expression lines could be utilized for a variety of genetic engineering applications, including selectable marker removal, targeted transgene integration into predetermined locations, and gene stacking.

Engineered minichromosomes in plants

Artificial chromosome platforms are described in plants. Because the function of centromeres is largely epigenetic, attempts to produce artificial chromosomes with plant centromere DNA have failed. The removal of the centromeric sequences from the cell strips off the centromeric histone that is the apparent biochemical marker of centromere activity. Thus, engineered minichromosomes have been produced by telomere mediated chromosomal truncation. The introduction of telomere repeats will cleave the chromosome at the site of insertion and attach the accompanying transgenes in the process. Such truncation events have been documented in maize, Arabidopsis, barley, rice, Brassica and wheat. Truncation of the nonvital supernumerary B chromosome of maize is a favorite target but engineered minichromosomes derived from the normal A chromosomes have also been recovered. Transmission through mitosis of small chromosomes is apparently normal but there is loss during meiosis. Potential solutions to address this issue are discussed. With procedures now well established to produce the foundation for artificial chromosomes in plants, current efforts are directed at building them up to specification using gene stacking methods and editing techniques.

Construction of Marker-Free Genetically Modified Maize Using a Heat-Inducible Auto-Excision Vector

Gene modification is a promising tool for plant breeding, and gradual application from the laboratory to the field. Selectable marker genes (SMG) are required in the transformation process to simplify the identification of transgenic plants; however, it is more desirable to obtain transgenic plants without selection markers. Transgene integration mediated by site-specific recombination (SSR) systems into the dedicated genomic sites has been demonstrated in a few different plant species. Here, we present an auto-elimination vector system that uses a heat-inducible Cre to eliminate the selectable marker from transgenic maize, without the need for repeated transformation or sexual crossing. The vector combines an inducible site-specific recombinase (hsp70::Cre) that allows for the precise elimination of the selectable marker gene egfp upon heating. This marker gene is used for the initial positive selection of transgenic tissue. The egfp also functions as a visual marker to demonstrate the effectiveness of the heat-inducible Cre. A second marker gene for anthocyanin pigmentation (Rsc) is located outside of the region eliminated by Cre and is used for the identification of transgenic offspring in future generations. Using the heat-inducible auto-excision vector, marker-free transgenic maize plants were obtained in a precisely controlled genetic modification process. Genetic and molecular analyses indicated that the inducible auto-excision system was tightly controlled, with highly efficient DNA excision, and provided a highly reliable method to generate marker-free transgenic maize.

Gene stacking by recombinases

Efficient methods of stacking genes into plant genomes are needed to expedite transfer of multigenic traits to crop varieties of diverse ecosystems. Over two decades of research has identified several DNA recombinases that carryout efficient cis and trans recombination between the recombination sites artificially introduced into the plant chromosome. The specificity and efficiency of recombinases make them extremely attractive for genome engineering. In plant biotechnology, recombinases have mostly been used for removing selectable marker genes and have rarely been extended to more complex applications. The reversibility of recombination, a property of the tyrosine family of recombinases, does not lend itself to gene stacking approaches that involve rounds of transformation for integrating genes into the engineered sites. However, recent developments in the field of recombinases have overcome these challenges and paved the way for gene stacking. Some of the key advancements include the application of unidirectional recombination systems, modification of recombination sites and transgene site modifications to allow repeated site-specific integrations into the selected site. Gene stacking is relevant to agriculturally important crops, many of which are difficult to transform; therefore, development of high-efficiency gene stacking systems will be important for its application on agronomically important crops, and their elite varieties. Recombinases, by virtue of their specificity and efficiency in plant cells, emerge as powerful tools for a variety of applications including gene stacking.

Per aspera ad astra: When harmful chromosomal translocations become a plus value in genetic evolution. Lessons from Saccharomyces cerevisiae

In this review we will focus on chromosomal translocations (either spontaneous or induced) in budding yeast. Indeed, very few organisms tolerate so well aneuploidy like Saccharomyces, allowing in depth studies on chromosomal numerical aberrations. Many wild type strains naturally develop chromosomal rearrangements while adapting to different environmental conditions. Translocations, in particular, are valuable not only because they naturally drive species evolution, but because they might allow the artificial generation of new strains that can be optimized for industrial purposes. In this area, several methodologies to artificially trigger chromosomal translocations have been conceived in the past years, such as the chromosomal fragmentation vector (CFV) technique, the Cre-loxP procedure, the FLP/FRT recombination method and, recently, the bridge - induced translocation (BIT) system. An overview of the methodologies to generate chromosomal translocations in yeast will be presented and discussed considering advantages and drawbacks of each technology, focusing in particular on the recent BIT system. Translocants are important for clinical studies because translocated yeast cells resemble cancer cells from morphological and physiological points of view and because the translocation event ensues in a transcriptional de-regulation with a subsequent multi-factorial genetic adaptation to new, selective environmental conditions. The phenomenon of post-translocational adaptation (PTA) is discussed, providing some new unpublished data and proposing the hypothesis that translocations may drive evolution through adaptive genetic selection.

Cell death caused by excision of centromeric DNA from a chromosome in Saccharomyces cerevisiae

If genetically modified organisms (GMOs) are spread through the natural environment, it might affect the natural environment. To help prevent the spread of GMOs, we examined whether it is possible to introduce conditional lethality by excising centromeric DNA from a chromosome by site-specific recombination in Saccharomyces cerevisiae as model organism. First, we constructed haploid cells in which excision of the centromeric DNA from chromosome IV can occur due to recombinase induced by galactose. By this excision, cell death can occur. In diploid cells, cell death can also occur by excision from both homologous chromosomes IV. Furthermore, cell death can occur in the case of chromosome V. A small number of surviving cells appeared with excision of centromeric DNA, and the diploid showed greater viability than the haploid in both chromosomes IV and V. The surviving cells appeared mainly due to deletion of a recombination target site (RS) from the chromosome.

Site-specific T-DNA integration in Arabidopsis thaliana mediated by the combined action of CRE recombinase and ϕC31 integrase

Random T-DNA integration into the plant host genome can be problematic for a variety of reasons, including potentially variable transgene expression as a result of different integration positions and multiple T-DNA copies, the risk of mutating the host genome and the difficulty of stacking well-defined traits. Therefore, recombination systems have been proposed to integrate the T-DNA at a pre-selected site in the host genome. Here, we demonstrate the capacity of the ϕC31 integrase (INT) for efficient targeted T-DNA integration. Moreover, we show that the iterative site-specific integration system (ISSI), which combines the activities of the CRE recombinase and INT, enables the targeting of genes to a pre-selected site with the concomitant removal of the resident selectable marker. To begin, plants expressing both the CRE and INT recombinase and containing the target attP site were constructed. These plants were supertransformed with a T-DNA vector harboring the loxP site, the attB sites, a selectable marker and an expression cassette encoding a reporter protein. Three out of the 35 transformants obtained (9%) showed transgenerational site-specific integration (SSI) of this T-DNA and removal of the resident selectable marker, as demonstrated by PCR, Southern blot and segregation analysis. In conclusion, our results show the applicability of the ISSI system for precise and targeted Agrobacterium-mediated integration, allowing the serial integration of transgenic DNA sequences in plants.

Marker-free gene targeting by recombinase-mediated cassette exchange

Repeated gene targeting by recombinase-mediated cassette exchange (RMCE) is an efficient tool for the study of gene function and regulation because of the high predictability and repeatability of gene expression. We have developed the site-directed integration (SDI) vector system for Agrobacterium-mediated transformation to precisely integrate a single copy of a desired gene into a predefined chromosomal locus in the absence of any coexpressed selection marker gene (Nanto et al. Plant Biotechnol J 3:203-214, 2005; Nanto and Ebinuma Transgenic Res 17:337-344, 2008; Nanto et al. Plant Cell Rep 28:777-785, 2009; Ebinuma and Nanto (2009) Marker-free targeted transformation, in Molecular techniques in crop improvement (2nd Edition). (Jain, S. M. and Brar, D. S. eds.), Springer Netherlands, pp. 527-543; Ebinuma and Nanto in preparation). The SDI vector system consists of a target vector to introduce the target cassette and an exchange vector to reintroduce the exchange cassette for gene replacement. We describe the molecular design and experimental protocol that can efficiently enrich RMCE events through the removal of randomly integrated copies and select clean marker-free targeted transgenic plants by using a negative marker.

Multiple new site-specific recombinases for use in manipulating animal genomes

Site-specific recombinases have been used for two decades to manipulate the structure of animal genomes in highly predictable ways and have become major research tools. However, the small number of recombinases demonstrated to have distinct specificities, low toxicity, and sufficient activity to drive reactions to completion in animals has been a limitation. In this report we show that four recombinases derived from yeast--KD, B2, B3, and R--are highly active and nontoxic in Drosophila and that KD, B2, B3, and the widely used FLP recombinase have distinct target specificities. We also show that the KD and B3 recombinases are active in mice.

Approaches for gene targeting and targeted gene expression in plants

Transgenic science and technology are fundamental to state-of-the-art plant molecular genetics and crop improvement. The new generation of technology endeavors to introduce genes 'stably' into 'site-specific' locations and in 'single copy' without the integration of extraneous vector 'backbone' sequences or selectable markers and with a 'predictable and consistent' expression. Several similar strategies and technologies, which can push the development of 'smart' genetically modified plants with desirable attributes, as well as enhance their consumer acceptability, are discussed in this review.

Transgene excision in pollen using a codon optimized serine resolvase CinH-RS2 site-specific recombination system

Transgene escape, a major environmental and regulatory concern in transgenic crop cultivation, could be alleviated by removing transgenes from pollen, the most frequent vector for transgene flow. A transgene excision vector containing a codon optimized serine resolvase CinH recombinase (CinH) and its recognition sites RS2 were constructed and transformed into tobacco (Nicotiana tabacum cv. Xanthi). CinH recombinase recognized 119 bp of nucleic acid sequences, RS2, in pollen and excised the transgene flanked by the RS2 sites. In this system, the pollen-specific LAT52 promoter from tomato was employed to control the expression of CinH recombinase. Loss of expression of a green fluorescent protein (GFP) gene under the control of the LAT59 promoter from tomato was used as an indicator of transgene excision. Efficiency of transgene excision from pollen was determined by flow cytometry (FCM)-based pollen screening. While a transgenic event in the absence of CinH recombinase contained about 70% of GFP-synthesizing pollen, three single-copy transgene events contained less than 1% of GFP-synthesizing pollen based on 30,000 pollen grains analyzed per event. This suggests that CinH-RS2 recombination system could be effectively utilized for transgene biocontainment.

Recombinase technology: applications and possibilities

The use of recombinases for genomic engineering is no longer a new technology. In fact, this technology has entered its third decade since the initial discovery that recombinases function in heterologous systems (Sauer in Mol Cell Biol 7(6):2087-2096, 1987). The random insertion of a transgene into a plant genome by traditional methods generates unpredictable expression patterns. This feature of transgenesis makes screening for functional lines with predictable expression labor intensive and time consuming. Furthermore, an antibiotic resistance gene is often left in the final product and the potential escape of such resistance markers into the environment and their potential consumption raises consumer concern. The use of site-specific recombination technology in plant genome manipulation has been demonstrated to effectively resolve complex transgene insertions to single copy, remove unwanted DNA, and precisely insert DNA into known genomic target sites. Recombinases have also been demonstrated capable of site-specific recombination within non-nuclear targets, such as the plastid genome of tobacco. Here, we review multiple uses of site-specific recombination and their application toward plant genomic engineering. We also provide alternative strategies for the combined use of multiple site-specific recombinase systems for genome engineering to precisely insert transgenes into a pre-determined locus, and removal of unwanted selectable marker genes.

Function of the aux and rol genes of the Ri plasmid in plant cell division in vitro

Auxin-autonomous growth in vitro may be related to the integration and expression of the aux and rol genes from the root-inducing (Ri) plasmid in plant cells infected by agropine-type Agrobacterium rhizogenes. To elucidate the functions of the aux and rol genes in plant cell division, plant cell lines transformed with the aux1 and aux2 genes or with the rolABCD genes were established using tobacco (Nicotiana tabacum) Bright Yellow-2 (BY-2) cells. The introduction of the aux1 and aux2 genes enabled the auxin-autonomous growth of BY-2 cells, but the introduction of the rolABCD genes did not affect the auxin requirement of the BY-2 cells. The results clearly show that the aux genes are necessary for auxinautotrophic cell division, and that the rolABCD genes are irrelevant in auxin autotrophy.

Expression of a transgene exchanged by the recombinase-mediated cassette exchange (RMCE) method in plants

We developed a site-directed integration (SDI) system for Agrobacterium-mediated transformation to precisely integrate a single copy of a desired gene into a predefined target locus by recombinase-mediated cassette exchange (RMCE). We produced site-specific transgenic tobacco plants from four target lines and examined expression of the transgene in T1 site-specific transgenic tobacco plants, which were obtained by backcrossing. We found that site-specific transgenic plants from the same target lines showed approximately the same level of expression of the transgene. Moreover, we demonstrated that site-specific transgenic plants showed much less variability of transgene expression than random-integration transgenic plants. Interestingly, transgenes in the same direction at the same target locus showed the same level of activity, but transgenes in different directions showed different levels of activity. The expression levels of transgene did not correlate with those of the target gene. Our results showed that the SDI system could benefit the precise comparisons between different gene constructs, the characterization of different chromosomal regions and the cost-effective screening of reliable transgenic plants.

[Application prospect of new site-specific recombination systems in gene transformation and gene stacking]

Site-specific recombination technology provides an important means for regulating transgene expression and improving efficiency of gene transformation. This technique can lead to the translocation, inversion, deletion, and integration, and the expression of the affected genes can be manipulated in different tissues and organs at different developmental periods. Using site-specific recombination system in gene transformation, we can not only acquire plenty of transformants with precise structural fidelity and faithful expression, but also understand the function of new genes efficiently. Gene stacking technology based on the site-specific recombination can produce transgenic crops with good complex traits, which will accelerate the process of research and development of elite cultivars and provide technical support for the exploration of transgenic crops in China.

A Cre/loxP-mediated self-activating gene excision system to produce marker gene free transgenic soybean plants

Marker-gene-free transgenic soybean plants were produced by isolating a developmentally regulated embryo-specific gene promoter, app1, from Arabidopsis and developing a self-activating gene excision system using the P1 bacteriophage Cre/loxP recombination system. To accomplish this, the Cre recombinase gene was placed under control of the app1 promoter and, together with a selectable marker gene (hygromycin phosphotransferase), were cloned between two loxP recombination sites. This entire sequence was then placed between a constitutive promoter and a coding region for either beta-glucuronidase (Gus) or glyphosate acetyltransferase (Gat). Gene excision would remove the entire sequence between the two loxP sites and bring the coding region to the constitutive promoter for expression. Using this system marker gene excision occurred in over 30% of the stable transgenic events as indicated by the activation of the gus reporter gene or the gat gene in separate experiments. Transgenic plants with 1 or 2 copies of a functional excision-activated gat transgene and without any marker gene were obtained in T0 or T1 generation. This demonstrates the feasibility of using developmentally controlled promoters to mediate marker excision in soybean.

Marker-free site-specific integration plants

Recently, site-specific recombination methods in plants have been developed to delete selection markers to produce marker-free transgenic plants or to integrate the transgene into a pre-determined genomic location to produce site-specific transgenic plants. However, these methods have been developed independently, and although the strategies of producing marker-free site-specific integration plants have been discussed, the concept has not been demonstrated. In the present study, we combined two approaches to site-specific recombination and demonstrated the concepts for removing the marker after site-specific integration for producing marker-free site-specific transgenic plants.

Functionality of the beta/six site-specific recombination system in tobacco and Arabidopsis: a novel tool for genetic engineering of plant genomes

The beta recombinase is a member of the prokaryotic site-specific serine recombinases (invertase/resolvase family), which in the presence of a DNA bending cofactor can catalyse DNA deletions between two directly oriented 90-bp six recombination sites. We have examined here whether the beta recombinase can be expressed in plants and whether it displays in planta its specific catalytic activity excising DNA sequences that are flanked by six sites. In plant protoplasts, the enzyme could be expressed as a GFP-beta recombinase fusion which can localise to the cell nucleus. Beta recombinase stably expressed in tobacco plants can catalyse deletion of a spacer region that is flanked by directly oriented six sites and has been placed between promoter and a GUS reporter gene (preventing GUS expression). In transient transformation experiments, beta recombinase-mediated elimination of the spacer results in transcriptional induction of the GUS gene. Similarly, beta recombinase in stably double-transformed Arabidopsis plants deletes specifically the spacer region of a reporter construct that has been incorporated into the genome. In the segregating T1 generation, plants were identified that contain exclusively the recombined reporter construct. In summary, our results demonstrate that functional / recombinase can be expressed in plants and that the enzyme is suitable to precisely eliminate undesired sequences from plant genomes. Therefore, the beta/six recombination system (and presumably related recombinases) may become an attractive tool for plant genetic engineering.

Generation of marker- and backbone-free transgenic potatoes by site-specific recombination and a bi-functional marker gene in a non-regular one-border agrobacterium transformation vector

A binary vector, designated PROGMO, was constructed to assess the potential of the Zygosaccharomyces rouxii R/Rs recombination system for generating marker- and backbone-free transgenic potato (Solanum tuberosum) plants with high transgene expression and low copy number insertion. The PROGMO vector utilises a constitutively expressed plant-adapted R recombinase and a codA-nptII bi-functional, positive/negative selectable marker gene. It carries only the right border (RB) of T-DNA and consequently the whole plasmid will be inserted as one long T-DNA into the plant genome. The recognition sites (Rs) are located at such positions that recombinase enzyme activity will recombine and delete both the bi-functional marker genes as well as the backbone of the binary vector, leaving only the gene of interest flanked by a copy of Rs and RB. Efficiency of PROGMO transformation was tested by introduction of the GUS reporter gene into potato. It was shown that after 21 days of positive selection and using 300 mgl(-1 )5-fluorocytosine for negative selection, 29% of regenerated shoots carried only the GUS gene flanked by a copy of Rs and RB. The PROGMO vector approach is simple and might be widely applicable for the production of marker- and backbone-free transgenic plants of many crop species.

Production of marker-free transgenic Nierembergia caerulea using MAT vector system

Agrobacterium tumefaciens strain EHA105 harboring an ipt-type MAT vector, pNPI132, was used to produce morphologically normal transgenic Nierembergia caerulea cv. Mont Blanc employing ipt gene as the selectable marker gene. beta-glucuronidase (GUS) gene was used as model gene of interest. The MAT vector system is a positive selection system that gives the advantage of regeneration to the transgenic cells without killing the non-transgenic cells. Infected explants were cultured on hormone- and antibiotic-free MS medium, and 65% of the regenerated shoots developed ipt shooty phenotype-morphologically abnormal shoots, within approximately 3 months after co-cultivation. Twenty morphologically normal shoots were produced from 12 transgenic ipt shoots 7 months after co-cultivation. The normal shoots rooted well on hormone-free MS medium. Ninety percent of the normal shoots were ipt (-), GUS(+) and excision(+) as determined by PCR and Southern blot analyses. These results indicate that ipt-type MAT vector system can be used successfully in Nierembergia to produce marker-free transgenic plants without using phytohormones and selective chemical agents.

The CBF1-dependent low temperature signalling pathway, regulon and increase in freeze tolerance are conserved in Populus spp

The meristematic tissues of temperate woody perennials must acclimate to freezing temperatures to survive the winter and resume growth the following year. To determine whether the C-repeat binding factor (CBF) family of transcription factors contributing to this process in annual herbaceous species also functions in woody perennials, we investigated the changes in phenotype and transcript profile of transgenic Populus constitutively expressing CBF1 from Arabidopsis (AtCBF1). Ectopic expression of AtCBF1 was sufficient to significantly increase the freezing tolerance of non-acclimated leaves and stems relative to wild-type plants. cDNA microarray experiments identified genes up-regulated by ectopic AtCBF1 expression in Populus, demonstrated a strong conservation of the CBF regulon between Populus and Arabidopsis and identified differences between leaf and stem regulons. We studied the induction kinetics and tissue specificity of four CBF paralogues identified from the Populus balsamifera subsp. trichocarpa genome sequence (PtCBFs). All four PtCBFs are cold-inducible in leaves, but only PtCBF1 and PtCBF3 show significant induction in stems. Our results suggest that the central role played by the CBF family of transcriptional activators in cold acclimation of Arabidopsis has been maintained in Populus. However, the differential expression of the PtCBFs and differing clusters of CBF-responsive genes in annual (leaf) and perennial (stem) tissues suggest that the perennial-driven evolution of winter dormancy may have given rise to specific roles for these 'master-switches' in the different annual and perennial tissues of woody species.

Site-specific recombination systems for the genetic manipulation of eukaryotic genomes

Site-specific recombination systems, such as the bacteriophage Cre-lox and yeast FLP-FRT systems, have become valuable tools for the rearrangement of DNA in higher eukaryotes. As a first step to expanding the repertoire of recombination tools, we screened recombination systems derived from the resolvase/invertase family for site-specific recombinase activity in the fission yeast Schizosaccharomyces pombe. Here, we report that seven recombination systems, four from the small serine resolvase subfamily (CinH, ParA, Tn1721, and Tn5053) and three from the large serine resolvase subfamily (Bxb1, TP901-1, and U153), can catalyze site-specific deletion in S. pombe. Those from the large serine resolvase subfamily were also capable of site-specific integration and inversion. In all cases, the recombination events were precise. Functional operation of these recombination systems in the fission yeast holds promise that they may be further developed as recombination tools for the site-specific rearrangement of plant and animal genomes.

Agrobacterium-mediated RMCE approach for gene replacement

We describe the site-directed integration (SDI) system for Agrobacterium-mediated transformation to precisely integrate a single copy of a desired gene into a predefined target locus by recombinase-mediated cassette exchange (RMCE). The system requires the selection of a transformed line with an integrated copy of a target cassette, and subsequent introduction of an exchange vector. The target cassette contains the npt and cod genes between oppositely orientated recognition sites (RS). The exchange vector T-DNA possesses an exchange cassette containing the gene of interest and a selectable marker gene, such as hpt, between oppositely orientated (inner) RS. Adjacent to the exchange cassette are ipt and recombinase (R) genes and an additional (outer) RS. The recombinase catalyses double-crossover between target RS and exchange inner RS to replace the integrated target cassette with the introduced exchange cassette. Transgenic plants that contain randomly integrated copies of the exchange vector T-DNA show an abnormal phenotype as a result of the overproduction of cytokinin from ipt gene expression. The recombinase can also act on the directly orientated outer RS to remove such randomly integrated copies. The system resulted in single-copy exchange into the target site only in regenerated tobacco at a frequency of 1%-3% per treated explant, or 4%-9% per regenerated line of normal phenotype. Thus, transgenic plants with only an exchanged copy can be efficiently accumulated and selected. Here, we show that the SDI system can efficiently replace the target cassettes with the exchange cassettes in a heterozygous or homozygous condition. The SDI system may be useful for precise comparisons of different gene constructs, the characterization of different chromosomal regions and the cost-effective screening of reliable transgenic plants.

Assessment of the safety of foods derived from genetically modified (GM) crops

This paper provides guidance on how to assess the safety of foods derived from genetically modified crops (GM crops); it summarises conclusions and recommendations of Working Group 1 of the ENTRANSFOOD project. The paper provides an approach for adapting the test strategy to the characteristics of the modified crop and the introduced trait, and assessing potential unintended effects from the genetic modification. The proposed approach to safety assessment starts with the comparison of the new GM crop with a traditional counterpart that is generally accepted as safe based on a history of human food use (the concept of substantial equivalence). This case-focused approach ensures that foods derived from GM crops that have passed this extensive test-regime are as safe and nutritious as currently consumed plant-derived foods. The approach is suitable for current and future GM crops with more complex modifications. First, the paper reviews test methods developed for the risk assessment of chemicals, including food additives and pesticides, discussing which of these methods are suitable for the assessment of recombinant proteins and whole foods. Second, the paper presents a systematic approach to combine test methods for the safety assessment of foods derived from a specific GM crop. Third, the paper provides an overview on developments in this area that may prove of use in the safety assessment of GM crops, and recommendations for research priorities. It is concluded that the combination of existing test methods provides a sound test-regime to assess the safety of GM crops. Advances in our understanding of molecular biology, biochemistry, and nutrition may in future allow further improvement of test methods that will over time render the safety assessment of foods even more effective and informative.

Cre/lox-mediated marker gene excision in transgenic maize (Zea mays L.) plants

After the initial transformation and tissue culture process is complete, selectable marker genes, which are used in virtually all transformation approaches, are not required for the expression of the gene of interest in the transgenic plants. There are several advantages to removing the selectable marker gene after it is no longer needed, such as enabling the reuse of selectable markers and simplifying transgene arrays. We have tested the Cre/ lox system from bacteriophage P1 for its ability to precisely excise stably integrated marker genes from chromosomes in transgenic maize plants. Two strategies, crossing and autoexcision, have been tested and demonstrated. In the crossing strategy, plants expressing the Cre recombinase are crossed with plants bearing a transgene construct in which the selectable marker gene is flanked by directly repeated lox sites. Unlike previous reports in which incomplete somatic and germline excision were common, in our experiments complete somatic and germline marker gene excision occurred in the F(1) plants from most crosses with multiple independent Cre and lox lines. In the autoexcision strategy, the cre gene, under the control of a heat shock-inducible promoter, is excised along with the nptII marker gene. Our results show that a transient heat shock treatment of primary transgenic callus is sufficient for inducing cre and excising the cre and nptII genes. Genetic segregation and molecular analysis confirmed that marker gene removal is precise, complete and stable. The autoexcision strategy provides a way of removing the selectable marker gene from callus or other tissues such as embryos and kernels.

Site-specific recombination for genetic engineering in plants

Site-specific recombination has been developed into a genetic engineering tool for higher eukaryotes. The manipulation of newly introduced DNA is now possible in the course of genetic transformation procedures, thus making the process more predictable and reliable. Also, a wide variety of chromosomal rearrangements using site-specific recombination have been documented both in metazoan and plant species. Applying such methods to plants opens new avenues for large-scale chromosome engineering in the future.

Visualization of somatic deletions mediated by R/RS site-specific recombination and induction of germinal deletions caused by callus differentiation and regeneration in rice

A transgenic rice plant expressing the recombinase of Zygosaccharomyces rouxii under the control of the CaMV 35S promoter was crossed with a transgenic plant carrying a cryptic (beta-glucuronidase) GUS reporter gene, which was activated by recombinase-mediated deletions between two specific recombination sites ( RSs). In F(1) plants, GUS activity was observed as blue spots and stripes in vascular bundles in several parts of the leaves. GUS expression was detected in all of the calli induced from F(1) seeds and throughout the regenerated plants. DNA analysis using the polymerase chain reaction and Southern blotting showed that R/ RS-mediated deletions occurred in all of the cells of the regenerated plants. Stable GUS expression was confirmed in the progeny resulting from self-pollination. Thus, the deletions obtained in the regenerated plants were genetically equivalent to the germinal deletions. These results indicate that the induction of callus differentiation and shoot regeneration is an effective manner to activate the R/ RS system and to produce plants with chromosomal deletions.

The protein encoded by oncogene 6b from Agrobacterium tumefaciens interacts with a nuclear protein of tobacco

The 6b gene in the T-DNA from Agrobacterium has oncogenic activity in plant cells, inducing tumor formation, the phytohormone-independent division of cells, and alterations in leaf morphology. The product of the 6b gene appears to promote some aspects of the proliferation of plant cells, but the molecular mechanism of its action remains unknown. We report here that the 6b protein associates with a nuclear protein in tobacco that we have designated NtSIP1 (for Nicotiana tabacum 6b-interacting protein 1). NtSIP1 appears to be a transcription factor because its predicted amino acid sequence includes two regions that resemble a nuclear localization signal and a putative DNA binding motif, which is similar in terms of amino acid sequence to the triple helix motif of rice transcription factor GT-2. Expression in tobacco cells of a fusion protein composed of the DNA binding domain of the yeast GAL4 protein and the 6b protein activated the transcription of a reporter gene that was under the control of a chimeric promoter that included the GAL4 upstream activating sequence and the 35S minimal promoter of Cauliflower mosaic virus. Furthermore, nuclear localization of green fluorescent protein-fused 6b protein was enhanced by NtSIP1. A cluster of acidic residues in the 6b protein appeared to be essential for nuclear localization and for transactivation as well as for the hormone-independent growth of tobacco cells. Thus, it seems possible that the 6b protein might function in the proliferation of plant cells, at least in part, through an association with NtSIP1.

Recombinase-directed plant transformation for the post-genomic era

Plant genomics promises to accelerate genetic discoveries for plant improvements. Machine-driven technologies are ushering in gene structural and expressional data at an unprecedented rate. Potential bottlenecks in this crop improvement process are steps involving plant transformation. With few exceptions, genetic transformation is an obligatory final step by which useful traits are engineered into plants. In addition, transgenesis is most often needed to confirm gene function, after deductions made through comparative genomics, expression profiles, and mutation analysis. This article reviews the use of recombinase systems to deliver DNA more efficiently into the plant genome.

The transposition pattern of the Ac element in tobacco cultured cells

We investigated physical distances and directions of transposition of the maize transposable element Ac in tobacco cultured cells. We introduced a T-DNA construct that carried a non-autonomous derivative of Ac (designated dAc-I-RS) that included sites for cleavage by restriction endonuclease MluI. Another cleavage site was also introduced into the T-DNA region outside of the dAc-I-RS transposable element. The tobacco cultured cell line BY-2 was transformed with the T-DNA and several transformed lines that had a single copy of the T-DNA at a different chromosomal location were isolated. These lines were co-cultured with Agrobacterium tumefaciens cells that carried a cDNA for the Ac transposase gene under the control of various promoters. Sublines of cultured cells in which dAc-I-RS had been transposed, were isolated. The genomic DNAs of these sublines were isolated and digested with MluI. Sizes of DNA segments generated by digestion were determined by pulse-field gel electrophoresis. Our results showed that 20 to 70% of transposition events had occurred within several hundreds kilo-base pairs (kb) on the same chromosome. These results demonstrate that the Ac-Ds element preferentially transposed to regions near the original site in a tobacco chromosome. In addition, the present results are an example of asymmetric transposition as demonstrated by the distance of transposition on the chromosome.

Genomic exploration of the hemiascomycetous yeasts: 8. Zygosaccharomyces rouxii

This paper reports the genomic analysis of strain CBS732 of Zygosaccharomyces rouxii, a homothallic diploid yeast. We explored the sequences of 4934 random sequencing tags of about 1 kb in size and compared them to the Saccharomyces cerevisiae gene products. Approximately 2250 nuclear genes, 57 tRNAs, the rDNA locus, the endogenous pSR1 plasmid and 15 mitochondrial genes were identified. According to 18S and 25S rRNA cladograms and to synteny analysis, Z. rouxii could be placed among the S. cerevisiae sensu lato yeasts.

A transformation vector for the production of marker-free transgenic plants containing a single copy transgene at high frequency

We represent here the GST-MAT vector system. The R recombinase gene of the site-specific recombination system R/RS from Zygosaccharomyces rouxii was fused to the chemical inducible promoter of the glutathione-S-transferase (GST-II-27) gene from Zea mays. Upon excision, the isopentenyltransferase (ipt) gene that is used as a selectable marker gene is removed. When the cauliflower mosaic virus 35S promoter (CaMV 35S) was used to express R recombinase, 67% of the marker-free transgenic plants had more than three transgene copies. Because the CaMV 35S promoter transiently and efficiently excised the ipt gene before callus and adventitious bud formation, the frequency of emergence of the ipt-shooty explants with a single T-DNA copy might be reduced. In this study we show that the GST-MAT vector efficiently produced transgenic ipt-shooty explants from 37 (88%) out of 42 differentiated adventitious buds and marker-free transgenic plants containing the GUS gene from five (14%) out of 37 ipt-shooty lines. Furthermore, the GST-MAT vector also induced two marker-free transgenic plants without the production of ipt-shooty intermediates. Southern blot analysis showed that six (86%) out of seven marker-free transgenic plants had a single GUS gene. This result suggests that the GST-MAT vector is useful to generate high frequency, marker-free transgenic plants containing a single transgene.

Introduction of SLG (S locus glycoprotein) alters the phenotype of endogenous S haplotype, but confers no new S haplotype specificity in Brassica rapa L

Self-incompatibility (SI) in Brassicaceae is genetically controlled by the S locus complex in which S locus glycoprotein (SLG) and S receptor kinase (SRK) genes have been identified, and these two genes encoding stigma proteins are believed to play important roles in SI recognition reaction. Here we introduced the SLG43 gene of Brassica rapa into a self-incompatible cultivar, Osome, of B. rapa, and examined the effect of this transgene on the SI behavior of the transgenic plants. Preliminary pollination experiments demonstrated that Osome carried S52 and S60, and both were codominant in stigma, but S52 was dominant to S60 in pollen. S43 was found to be recessive to S52 and codominant with S60 in stigma. The nucleotide sequence of SLG43 was more similar to that of SLG52 (87.8% identity) than to that of SLG60 (74.8% identity). Three of the ten primary transformants (designated No. 1 to No. 10) were either completely (No. 9) or partially (No. 6 and No. 7) self-compatible; the SI phenotype of the stigma was changed from S52S60 to S60, but the SI phenotype of the pollen was not altered. In these three plants, the mRNA and protein levels of both SLG43 and SLG52 were reduced, whereas those of SLG60 were not. All the plants in the selfed progeny of No. 9 and No. 6 regained SI and they produced a normal level of SLG52. These results suggest that the alteration of the SI phenotype of the stigma in the transformants Nos. 6, 7, and 9 was the result of specific co-suppression between the SLG43 transgene and the endogenous SLG52 gene. Three of the transformants (Nos. 5, 8 and 10) produced SLG43 protein, but their SI phenotype was not altered. The S60 homozygotes in the selfed progeny of No. 10 which produced the highest level of SLG43 were studied because S43 was codominant with S60 in the stigma. They produced SLG43 at approximately the same level as did S43S60 heterozygotes, but did not show S43 haplotype specificity at the stigma side. We conclude that SLG is necessary for the expression of the S haplotype specificity in the stigma but the introduction of SLG alone is not sufficient for conferring a novel S haplotype specificity to the stigma.

Selectable marker-free transgenic plants without sexual crossing: transient expression of cre recombinase and use of a conditional lethal dominant gene

Transgenic tobacco plants were produced that contained single-copy pART54 T-DNA, with a 35S-uidA gene linked to loxP-flanked kanamycin resistance (nptII) and cytosine deaminase (codA) genes. Retransformation of these plants with pCre1 (containing 35S transcribed cre recombinase and hygromycin (hpt) resistance genes) resulted in excision of the loxP-flanked genes from the genome. Phenotypes of progeny from selfed-retransformed plants confirmed nptII and codA excision and integration of the cre-linked hpt gene. To avoid integration of the hpt gene, and thereby generate plants totally free of marker genes, we attempted to transiently express the cre recombinase. Agrobacterium tumefaciens (pCre1) was cocultivated with leaf discs of two pART54-transformed lines and shoots were regenerated in the absence of hygromycin selection. Nineteen of 773 (0.25%) shoots showed tolerance to 5-fluorocytosine (5-fc) which is converted to the toxic 5-fluorouracil by cytosine deaminase. 5-fc tolerance in six shoots was found to be due to excision of the loxP-flanked region of the pART54 T-DNA. In four of these shoots excision could be attributed to cre expression from integrated pCre1 T-DNA, whereas in two shoots excision appeared to be a consequence of transient cre expression from pCre1 T-DNA molecules which had been transferred to the plant cells but not integrated into the genome. The absence of selectable marker genes was confirmed by the phenotype of the T1 progeny. Therefore, through transient cre expression, marker-free transgenic plants were produced without sexual crossing. This approach could be applicable to the elimination of marker genes from transgenic crops which must be vegetatively propagated to maintain their elite genotype.

Comparative kinetic analysis of FLP and cre recombinases: mathematical models for DNA binding and recombination

The integrase class site specific recombinases FLP from Saccharomyces cerevisiae, and Cre from bacteriophage P1, have been extensively used to direct DNA rearrangements in heterologous organisms. Although their reaction mechanisms have been relatively well characterised, little comparative analysis of the two enzymes has been published. We present a comparative kinetic analysis of FLP and Cre, which identifies important differences. Gel mobility shift assays show that Cre has a higher affinity for its target, loxP (7. 4x10(10) M-1), than FLP for its target, FRT (8.92x10(8) M-1). We show that both recombinases bind the two halves of their target sites cooperatively, and that Cre shows approximately threefold higher cooperativity than FLP. Using a mathematical model describing the sequential binding of recombinase monomers to DNA, we have determined values for the association and dissociation rate constants for FLP and Cre.FLP and Cre also showed different characteristics in in vitro recombination assays. In particular, approximately tenfold more active FLP was required than Cre to optimally recombine a given quantity of excision substrate. FLP was able to reach maximum excision levels approaching 100%, whilst Cre-mediated excision did not exceed 75%. To investigate possible reasons for these differences a mathematical model describing the excision recombination reaction was established. Using measured DNA binding parameters for FLP and Cre in the model, and comparing simulated and experimental recombination data, the values of the remaining unknown parameters were determined. This analysis indicates that the synaptic complex is more stable for Cre than for FLP.

Characterization of the transposition pattern of the Ac element in Arabidopsis thaliana using endonuclease I-SceI

We have investigated physical distances and directions of transposition of the maize transposable element Ac in Arabidopsis thaliana. We prepared a transferred DNA (T-DNA) construct that carried a non-autonomous derivative of Ac with a site for cleavage by endonuclease I-SceI (designated dAc-I-RS element). Another cleavage site was also introduced into the T-DNA region outside dAc-I-RS. Three transgenic Arabidopsis plants were generated, each of which had a single copy of the T-DNA at a different chromosomal location. These transgenic plants were crossed with the Arabidopsis that carried the gene for Ac transposase and progeny in which dAc-I-RS had been transposed were isolated. After digestion of the genomic DNA of these progeny with endonuclease I-SceI, sizes of segment of DNA were determined by pulse-field gel electrophoresis. We also performed linkage analysis for the transposed elements and sites of mutations near the elements. Our results showed that 50% of all transposition events had occurred within 1,700 kb on the same chromosome, with 35% within 200 kb, and that the elements transposed in both directions on the chromosome with roughly equal probability. The data thus indicate that the Ac-Ds system is most useful for tagging of genes that are present within 200 kb of the chromosomal site of Ac in Arabidopsis. In addition, determination of the precise localization of the transposed dAc-I-RS element should definitely assist in map-based cloning of genes around insertion sites.

Visual characterization of recombination at FRT-gusA loci in transgenic tobacco mediated by constitutive expression of the native FLP recombinase

FLP/FRT-mediated site-specific recombination was studied with a recombination-reporter gene system which allows visualization of β-glucuronidase (GUS) expression after site-specific excisional activation of a silent gusA gene. This system was used for characterization of the functional activity of the Saccharomyces cerevisiae native FLP recombinase driven by the cauliflower mosaic virus (CaMV) 35s promoter [linked to the tobacco mosaic virus (TMV) omega translational leader] in mediating site-specific recombination of chromosomal FRT sites in tobacco FLP x FRT-reporter hybrids. Six hybrids were generated from crosses of lines containing either a stably integrated recombination-reporter or a FLP-expression construct. The activated gusA phenotype was specific to hybrid progenies and was not observed in either parental plants or their selfed progenies. Recombination efficiency in whole seedlings was estimated by the percent of radioactivity on a Southern blot which was incorporated into the recombined DNA product. Estimated efficiency mean values for the six crosses ranged from 5.2 to 52.0%. Histochemical analysis in hybrid plants visualized GUS activity with variable chimeric patterns and intensities. Recombination efficiency and GUS expression varied both among and within crosses, while higher recombination efficiency coincided with larger and more intense patterns of GUS activity. These data suggest that recombination is induced randomly during somatic developmental stages and that the pattern and intensity generated in a given plant are affected by factors imposing varibility not only between but also within crosses. Additionally, while recombination in a population of FLP/FRT hybrids may occur in all plants, recombination efficiency may still be low in any given plant. The activity of the native, as compared to a modified, FLP (Kilby et al. 1995) in the activation of transgenic traits in tobacco is discussed.

Excision of specific DNA-sequences from integrated retroviral vectors via site-specific recombination

Vectors for gene transfer and gene therapy were developed which combine the advantages of the integrase and recombinase systems. This was achieved by inserting two loxP sites for specific DNA excision into an MESV based retroviral vector. We show that this 'retroviral lox system' allows the infection of cells and the expression of transferred genes. In addition, we constructed an efficient retrovirus-based expression system for a modified Cre recombinase. Functional tests for DNA excision from integrated retroviral lox vectors were performed by the use of a negative selectable marker gene (thymidine kinase). Cre expression in cells infected with retroviral lox vectors and subsequent BrdU selection for cells in which site-specific recombination has occurred results in large numbers of independent cell clones. These results were confirmed by detailed molecular analysis. In addition we developed retroviral suicide vectors in which the enhancer/promoter elements of both LTRs were replaced by lox sequences. We show that lox-sequences located in the LTRs of retroviral vectors are stable during retroviral replication. Potential applications of this system would be the establishment of revertants of retrovirus-infected cells by controlled excision of nearly the complete proviral DNA.