RNA binding characteristics and overall topology of the vaccinia poly(A) polymerase-processivity factor-primer complex

Domain-level rocking motion within a polymerase that translocates on single-stranded nucleic acid

Vaccinia virus poly(A) polymerase (VP55) is the only known polymerase that can translocate independently with respect to single-stranded nucleic acid (ssNA). Previously, its structure has only been solved in the context of the VP39 processivity factor. Here, a crystal structure of unliganded monomeric VP55 has been solved to 2.86 Å resolution, showing the first backbone structural isoforms among either VP55 or its processivity factor (VP39). Backbone differences between the two molecules of VP55 in the asymmetric unit indicated that unliganded monomeric VP55 can undergo a `rocking' motion of the N-terminal domain with respect to the other two domains, which may be `rigidified' upon VP39 docking. This observation is consistent with previously demonstrated experimental molecular dynamics of the monomer during translocation with respect to nucleic acid and with different mechanisms of translocation in the presence and absence of processivity factor VP39. Side-chain conformational changes in the absence of ligand were observed at a key primer contact site and at the catalytic center of VP55. The current structure completes the trio of possible structural forms for VP55 and VP39, namely the VP39 monomer, the VP39-VP55 heterodimer and the VP55 monomer.

Polymerase translocation with respect to single-stranded nucleic acid: looping or wrapping of primer around a poly(A) polymerase

Vaccinia virus protein VP55 translocates continuously with respect to single-stranded nucleic acid while extending its 3'end. Here, all key sites of polymerase-primer interaction were identified, demonstrating the wrapping or looping of polyadenylation primer around the polymerase during translocation. Side-chain substitutions at one of the sites indicated its requirement for tail extension beyond approximately 12 nucleotides in length, and conformational changes observed upon oligonucleotide binding suggested allosteric connectivity during translocation. Conformational changes in VP39 upon VP55 binding suggested that, within the VP55-VP39 complex, VP39's mRNA 5' cap binding site closes. The crystallographic structure showed a PAPase catalytic center without side-chain substitutions, possessing two metal ions and with all known reactive and catalytic groups represented, fitting a classical two-metal ion mechanism for phosphoryl transfer.

SELEX--a (r)evolutionary method to generate high-affinity nucleic acid ligands

SELEX stands for systematic evolution of ligands by exponential enrichment. This method, described primarily in 1990 [Ellington, A.D., Szostak, J.W., 1990. In vitro selection of RNA molecules that bind specific ligands. Nature 346, 818-822; Tuerk, C., Gold, L., 1990. Systematic evolution of ligands by exponential enrichment: RNA ligands to bacteriophage T4 DNA polymerase. Science 249, 505-510] aims at the development of aptamers, which are oligonucleotides (RNA or ssDNA) binding to their target with high selectivity and sensitivity because of their three-dimensional shape. Aptamers are all new ligands with a high affinity for considerably differing molecules ranging from large targets as proteins over peptides, complex molecules to drugs and organic small molecules or even metal ions. Aptamers are widely used, including medical and pharmaceutical basic research, drug development, diagnosis, and therapy. Analytical and separation tools bearing aptamers as molecular recognition and binding elements are another big field of application. Moreover, aptamers are used for the investigation of binding phenomena in proteomics. The SELEX method was modified over the years in different ways to become more efficient and less time consuming, to reach higher affinities of the aptamers selected and for automation of the process. This review is focused on the development of aptamers by use of SELEX and gives an overview about technologies, advantages, limitations, and applications of aptamers.

Crystal structures of the vaccinia virus polyadenylate polymerase heterodimer: insights into ATP selectivity and processivity

Polyadenylation of mRNAs in poxviruses, crucial for virion maturation, is carried out by a poly(A) polymerase heterodimer composed of a catalytic component, VP55, and a processivity factor, VP39. The ATP-gamma-S bound and unbound crystal structures of the vaccinia polymerase reveal an unusual architecture for VP55 that comprises of N-terminal, central or catalytic, and C-terminal domains with different topologies and that differs from many polymerases, including the eukaryotic poly(A) polymerases. Residues in the active site of VP55, located between the catalytic and C-terminal domains, make specific interactions with the adenine of the ATP analog, establishing the molecular basis of ATP recognition. VP55's concave surface docks the globular VP39. A model for RNA primer binding that involves all three VP55 domains and VP39 is proposed. The model supports biochemical evidence that VP39 functions as a processivity factor by partially enclosing the RNA primer at the heterodimer interface.

Molecular flexibility and discontinuous translocation of a non-templated polymerase

Little is known regarding the translocation of non-templated nucleic acid polymerases with respect to single-stranded primers. VP55, the vaccinia virus poly(A) polymerase, translocates as it processively adds a approximately 3-7 adenylate tail to primers possessing only three ribouridylate residues (as an (rU)(2)-N(15)-rU motif), and a approximately 25-30 adenylate tail to primers that are more U-rich. Here, three models were addressed for the translocation of VP55 with respect to its primer, namely: (a) rigid protein/rigid nucleic acid; (b) flexible protein/rigid nucleic acid; (c) rigid protein/flexible nucleic acid. Analysis of free and covalently VP55-attached primers favored either (b) or a version of (c) incorporating a passive steric block, and suggested two regions of relative motion between polymerase and primer. Inclusion of a 6nt uridylate-rich patch at the primer 3' end switched the polymerase from approximately 3-7 nt to approximately 25-30 nt tail addition without affecting initial binding affinity. By synthesizing this patch as a (rU/dC) pool, discontinuous polymerase movements could be detected.

A history of poly A sequences: from formation to factors to function

Biological polyadenylation, first recognized as an enzymatic activity, remained an orphan enzyme until poly A sequences were found on the 3' ends of eukarvotic mRNAs. Their presence in bacteria viruses and later in archeae (ref. 338) established their universality. The lack of compelling evidence for a specific function limited attention to their cellular formation. Eventually the newer techniques of molecular biology and development of accurate nuclear processing extracts showed 3' end formation to be a two-step process. Pre-mRNA was first cleaved endonucleolytically at a specific site that was followed by sequential addition of AMPs from ATP to the 3' hydroxyl group at the end of mRNA. The site of cleavage was specified by a conserved hexanucleotide, AAUAAA, from 10 to 30 nt upstream of this 3' end. Extensive purification of these two activities showed that more than 10 polypeptides were needed for mRNA 3' end formation. Most of these were in complexes involved in the cleavage step. Two of the best characterized are CstF and CPSF, while two other remain partially purified but essential. Oddly, the specific proteins involved in phosphodiester bond hydrolysis have yet to be identified. The polyadenylation step occurs within the complex of poly A polymerase and poly A-binding protein, PABII, that controls poly A length. That the cleavage complex, CPSF, is also required for this step attests to a tight coupling of the two steps of 3' and formation. The reaction reconstituted from these RNA-free purified factors correctly processes pre-mRNAs. Meaningful analysis of the role of poly A in mRNA metabolism or function was possible once quantities of these proteins most often over-expressed from cDNA clones became available. The large number needed for two simple reactions of an endonuclease, a polymerase and a sequence recognition factor, pointed to 3' end formation as a regulated process. Polyadenylation itself had appeared to require regulation in cases where two poly A sites were alternatively processed to produce mRNA coding for two different proteins. The 64-KDa subunit of CstF is now known to be a regulator of poly A site choice between two sites in the immunoglobulin heavy chain of B cells. In resting cells the site used favors the mRNA for a membrane-bound protein. Upon differentiation to plasma cells, an upstream site is used the produce a secreted form of the heavy chain. Poly A site choice in the calcitonin pre-mRNA involves splicing factors at a pseudo splice site in an intron downstream of the active poly site that interacts with cleavage factors for most tissues. The molecular basis for choice of the alternate site in neuronal tissue is unknown. Proteins needed for mRNA 3' end formation also participate in other RNA-processing reactions: cleavage factors bind to the C-terminal domain of RNA polymerase during transcription; splicing of 3' terminal exons is stimulated port of by cleavage factors that bind to splicing factors at 3' splice sites. nuclear ex mRNAs is linked to cleavage factors and requires the poly A II-binding protein. Most striking is the long-sought evidence for a role for poly A in translation in yeast where it provides the surface on which the poly A-binding protein assembles the factors needed for the initiation of translation. This adaptability of eukaryotic cells to use a sequence of low information content extends to bacteria where poly A serves as a site for assembly of an mRNA degradation complex in E. coli. Vaccinia virus creates mRNA poly A tails by a streamlined mechanism independent of cleavage that requires only two proteins that recognize unique poly A signals. Thus, in spite of 40 years of study of poly A sequences, this growing multiplicity of uses and even mechanisms of formation seem destined to continue.

Path of an RNA ligand around the surface of the vaccinia VP39 subunit of its cognate VP39-VP55 protein heterodimer

VP39 is a vaccinia virus-encoded RNA modifying protein with roles in the modification of both mRNA ends. At the 3' end it acts as a processivity factor for the vaccinia poly(A) polymerase (VP55), promoting poly(A) tail elongation. Despite VP39's three-dimensional structure having been elucidated along with details of its mode of mRNA 5' end binding, the VP39-VP55 heterodimer's molecular mechanism of processivity is largely unknown. Here, the area immediately above almost the entire surface of the VP39 subunit was probed using chemical reporters, and the path of a previously unidentified RNA binding site was revealed. The path was indicated to fall within a cleft formed by the intersubunit interface and was consistent with both a previously reported model of the heterodimer-nucleic acid ternary complex and the known function of the heterodimer in processive poly(A) tail elongation.