A self-cleaving DNA enzyme modified with amines, guanidines and imidazoles operates independently of divalent metal cations (M2+)

DNAzyme-based ultrasensitive immunoassay: Recent advances and emerging trends

Immunoassay, as the most commonly used method for protein detection, is simple to operate and highly specific. Sensitivity improvement is always the thrust of immunoassays, especially for the detection of trace quantities. The emergence of artificial enzyme, i.e., DNAzyme, provides a novel approach to improve the detection sensitivity of immunoassay. Simultaneously, its advantages of simple synthesis and high stability enable low cost, broad applicability and long shelf life for immunoassay. In this review, we summarized the recent advances in DNAzyme-based immunoassay. First, we summarized the existing different DNAzymes based on their catalytic activities. Next, the common signal amplification strategies used for DNAzyme-based immunoassays were reviewed to cater to diverse detection requirements. Following, the wide applications in disease diagnosis, environmental monitoring and food safety were discussed. Finally, the current challenges and perspectives on the future development of DNAzyme-based immunoassays were also provided.

Superanionic DNA: enzymatic synthesis of hypermodified DNA bearing four different anionic substituents at all four nucleobases

We designed and synthesized a set of four 2'-deoxyribonucleoside 5'-O-triphosphates (dNTPs) derived from 5-substituted pyrimidines and 7-substituted 7-deazapurines bearing anionic substituents (carboxylate, sulfonate, phosphonate, and phosphate). The anion-linked dNTPs were used for enzymatic synthesis of modified and hypermodified DNA using KOD XL DNA polymerase containing one, two, three, or four modified nucleotides. The polymerase was able to synthesize even long sequences of >100 modified nucleotides in a row by primer extension (PEX). We also successfully combined two anionic and two hydrophobic dNTPs bearing phenyl and indole moieties. In PCR, the combinations of one or two modified dNTPs gave exponential amplification, while most of the combinations of three or four modified dNTPs gave only linear amplification in asymmetric PCR. The hypermodified ONs were successfully re-PCRed and sequenced by Sanger sequencing. Biophysical studies including hybridization, denaturation, CD spectroscopy and molecular modelling and dynamics suggest that the presence of anionic modifications in one strand decreases the stability of duplexes while still preserving the B-DNA conformation, whilst the DNA hypermodified in both strands adopts a different secondary structure.

A modular XNAzyme cleaves long, structured RNAs under physiological conditions and enables allele-specific gene silencing

Nucleic-acid catalysts (ribozymes, DNA- and XNAzymes) cleave target (m)RNAs with high specificity but have shown limited efficacy in clinical applications. Here we report on the in vitro evolution and engineering of a highly specific modular RNA endonuclease XNAzyme, FR6_1, composed of 2'-deoxy-2'-fluoro-β-D-arabino nucleic acid (FANA). FR6_1 overcomes the activity limitations of previous DNA- and XNAzymes and can be retargeted to cleave highly structured full-length (>5 kb) BRAF and KRAS mRNAs at physiological Mg2+ concentrations with allelic selectivity for tumour-associated (BRAF V600E and KRAS G12D) mutations. Phosphorothioate-FANA modification enhances FR6_1 biostability and enables rapid KRAS mRNA knockdown in cultured human adenocarcinoma cells with a G12D-allele-specific component provided by in vivo XNAzyme cleavage activity. These results provide a starting point for the development of improved gene-silencing agents based on FANA or other XNA chemistries.

Nonenzymatic assembly of active chimeric ribozymes from aminoacylated RNA oligonucleotides

The emergence of a primordial ribosome from the RNA world would have required access to aminoacylated RNA substrates. The spontaneous generation of such substrates without enzymes is inefficient, and it remains unclear how they could be selected for in a prebiotic milieu. In our study, we identify a possible role for aminoacylated RNA in ribozyme assembly, a longstanding problem in the origin-of-life research. We show that aminoacylation of short RNAs greatly accelerates their assembly into functional ribozymes by forming amino acid bridges in the phosphodiester backbone. Our work therefore addresses two key challenges within the origin-of-life field: we demonstrate assembly of functional ribozymes, and we identify a potential evolutionary benefit for RNA aminoacylation that is independent of coded peptide translation.

Aminoacylated transfer RNAs, which harbor a covalent linkage between amino acids and RNA, are a universally conserved feature of life. Because they are essential substrates for ribosomal translation, aminoacylated oligonucleotides must have been present in the RNA world prior to the evolution of the ribosome. One possibility we are exploring is that the aminoacyl ester linkage served another function before being recruited for ribosomal protein synthesis. The nonenzymatic assembly of ribozymes from short RNA oligomers under realistic conditions remains a key challenge in demonstrating a plausible pathway from prebiotic chemistry to the RNA world. Here, we show that aminoacylated RNAs can undergo template-directed assembly into chimeric amino acid–RNA polymers that are active ribozymes. We demonstrate that such chimeric polymers can retain the enzymatic function of their all-RNA counterparts by generating chimeric hammerhead, RNA ligase, and aminoacyl transferase ribozymes. Amino acids with diverse side chains form linkages that are well tolerated within the RNA backbone and, in the case of an aminoacyl transferase, even in its catalytic center, potentially bringing novel functionalities to ribozyme catalysis. Our work suggests that aminoacylation chemistry may have played a role in primordial ribozyme assembly. Increasing the efficiency of this process provides an evolutionary rationale for the emergence of sequence and amino acid–specific aminoacyl-RNA synthetase ribozymes, which could then have generated the substrates for ribosomal protein synthesis.

Ferrocene as a potential electrochemical reporting surrogate of abasic sites in DNA

We have evaluated the possibility of replacing abasic sites with ferrocene for enzymatic synthesis of canonical and modified DNA.

Dependence of click-SELEX performance on the nature and average number of modified nucleotides

The click-SELEX procedure enables the identification of nucleobase-modified aptamers in which chemical entities are introduced by a copper(i)-catalysed alkyne-azide ‘click’ reaction. Here we report on the impact of modified nucleobases on PCR conditions and the average amount of modified nucleobases on click-SELEX performance. We demonstrate click-SELEX being strongly dependent on which and on how many modifications are used. However, when using C3-GFP the number of modifications did not impact the overall success of the selection procedure.

The click-SELEX procedure enables the identification of nucleobase-modified aptamers in which chemical entities are introduced by a copper(i)-catalysed alkyne-azide ‘click’ reaction.

Selection of M2+-independent RNA-cleaving DNAzymes with Sidechains Mimicking Arginine and Lysine

Sequence-specific cleavage of RNA by nucleic acid catalysts in the absence of a divalent metal cation (M 2+ ) has remained an important goal in biomimicry with potential therapeutic applications. Given the lack of functional group diversity in canonical nucleotides, modified nucleotides with amino acid-like side chains were used to enhance self-cleavage rates at a single embedded ribonucleoside site. Previous works relied on three functional groups: an amine, a guanidine and an imidazole ensconced on three different nucleosides. However, to date, few studies have systematically addressed the necessity of all three modifications, as the value of any single modified nucleoside is contextualized at the outset of selection. Herein, we report on the use of only two modified dNTPs, excluding an imidazole, i.e. 5-(3-guanidinoallyl)-2'-dUTP (dU ga TP) and 5-aminoallyl-2'-dCTP (dC aa TP), to select in-vitro self-cleaving DNAzymes that cleave in the absence of M 2+ in a pH-independent fashion. Cleavage shows biphasic kinetics with rate constants that are significantly higher than in unmodified DNAzymes and compare favorably to certain DNAzymes involving an imidazole. This work is the first report of a M2+-independent DNAzyme with two cationic modifications; as such it shows appreciable self-cleaving activity in the absence of an imidazole modification.

Synthesis and Polymerase Recognition of Threose Nucleic Acid Triphosphates Equipped with Diverse Chemical Functionalities

Expanding the chemical space of evolvable non-natural genetic polymers (XNAs) to include functional groups that enhance protein target binding affinity offers a promising route to therapeutic aptamers with high biological stability. Here we describe the chemical synthesis and polymerase recognition of 10 chemically diverse functional groups introduced at the C-5 position of α-l-threofuranosyl uridine nucleoside triphosphate (tUTP). We show that the set of tUTP substrates is universally recognized by the laboratory-evolved polymerase Kod-RSGA. Insights into the mechanism of TNA synthesis were obtained from a high-resolution X-ray crystal structure of the postcatalytic complex bound to the primer-template duplex. A structural analysis reveals a large cavity in the enzyme active site that can accommodate the side chain of C-5-modified tUTP substrates. Our findings expand the chemical space of evolvable nucleic acid systems by providing a synthetic route to artificial genetic polymers that are uniformly modified with diversity-enhancing functional groups.

Activation of 8-17 DNAzyme with extra functional group at conserved residues is related to catalytic metal ion

In 8-17 DNAzyme, the end loop A⁶G⁷C⁸ is a highly conserved motif. Here we reported an activation approach by specific chemical modifications on A6 and C8 for more efficient Ca²⁺-mediated reaction. The importance of the end loop was further highlighted and its critical conservation broken for more powerful catalysts.

In vitro Selection of Chemically Modified DNAzymes

DNAzymes are in vitro selected DNA oligonucleotides with catalytic activities. RNA cleavage is one of the most extensively studied DNAzyme reactions. To expand the chemical functionality of DNA, various chemical modifications have been made during and after selection. In this review, we summarize examples of RNA-cleaving DNAzymes and focus on those modifications introduced during in vitro selection. By incorporating various modified nucleotides via polymerase chain reaction (PCR) or primer extension, a few DNAzymes were obtained that can be specifically activated by metal ions such as Zn2+ and Hg2+. In addition, some modifications were introduced to mimic RNase A that can cleave RNA substrates in the absence of divalent metal ions. In addition, single modifications at the fixed regions of DNA libraries, especially at the cleavage junctions, have been tested, and examples of DNAzymes with phosphorothioate and histidine-glycine modified tertiary amine were successfully obtained specific for Cu2+, Cd2+, Zn2+, and Ni2+. Labeling fluorophore/quencher pair right next to the cleavage junction was also used to obtain signaling DNAzymes for detecting various metal ions and cells. Furthermore, we reviewed work on the cleavage of 2'-5' linked RNA and L-RNA substrates. Finally, applications of these modified DNAzymes as biosensors, RNases, and biochemical probes are briefly described with a few future research opportunities outlined at the end.

Dynamic changes in DNA populations revealed by split-combine selection

Clickmers are chemically modified aptamers representing an innovative reagent class for developing binders for biomolecules with great impact on therapeutic and diagnostic applications. To establish a novel layer for screening various chemical entities, we developed a split–combine selection strategy simultaneously enriching for clickmers having different modifications. Due to the inherent design of this strategy, dynamic changes of DNA populations are traceable at an individual sequence level. Besides off-rate guided enrichment, the process makes the survival of the sequences most adapted to the applied selection condition observable. The underlying strategy provides unprecedented molecular insight into the selection process, based on which more sophisticated procedures will become pliable in the future.

A split-combine selection approach reveals dynamic population changes in DNA libraries during in vitro selection procedures.

Molecular Features and Metal Ions That Influence 10-23 DNAzyme Activity

Deoxyribozymes (DNAzymes) with RNA hydrolysis activity have a tremendous potential as gene suppression agents for therapeutic applications. The most extensively studied representative is the 10-23 DNAzyme consisting of a catalytic loop and two substrate binding arms that can be designed to bind and cleave the RNA sequence of interest. The RNA substrate is cleaved between central purine and pyrimidine nucleotides. The activity of this DNAzyme in vitro is considerably higher than in vivo, which was suggested to be related to its divalent cation dependency. Understanding the mechanism of DNAzyme catalysis is hindered by the absence of structural information. Numerous biological studies, however, provide comprehensive insights into the role of particular deoxynucleotides and functional groups in DNAzymes. Here we provide an overview of the thermodynamic properties, the impact of nucleobase modifications within the catalytic loop, and the role of different metal ions in catalysis. We point out features that will be helpful in developing novel strategies for structure determination and to understand the mechanism of the 10-23 DNAzyme. Consideration of these features will enable to develop improved strategies for structure determination and to understand the mechanism of the 10-23 DNAzyme. These insights provide the basis for improving activity in cells and pave the way for developing DNAzyme applications.

Synthesis and polymerase recognition of a pyrrolocytidine TNA triphosphate

Synthetic genetics is an area of synthetic biology that aims to extend the properties of heredity and evolution to artificial genetic polymers, commonly known as xeno-nucleic acids or XNAs. In addition to establishing polymerases that are able to convert genetic information back and forth between DNA and XNA, efforts are underway to construct XNAs with expanded chemical functionality. α-L-Threose nucleic acid (TNA), a type of XNA that is recalcitrant to nuclease digestion and amenable to Darwinian evolution, provides a model system for developing XNAs with functional groups that are not present in natural DNA and RNA. Here, we describe the synthesis and polymerase activity of a cytidine TNA triphosphate analog (6-phenyl-pyrrolocytosine, tC^p TP) that maintains Watson-Crick base pairing with guanine. Polymerase-mediated primer extension assays show that tC^p TP is an efficient substrate for Kod-RI, a DNA-dependent TNA polymerase developed to explore the functional properties of TNA by in vitro selection. Fidelity studies reveal that a cycle of TNA synthesis and reverse transcription occurs with 99.9% overall fidelity when tC^p TP and 7-deaza-tGTP are present as TNA substrates. This result expands the toolkit of TNA building blocks available for in vitro selection.

Site-specific functionalization with amino, guanidinium, and imidazolyl groups enabling the activation of 10–23 DNAzyme

10–23 DNAzyme has been extensively explored as a therapeutic and biotechnological tool, as well as in DNA computing. Faster cleavage or transformation is always needed. The present research displays a rational modification approach for a more efficient DNAzyme. In the catalytic core, amino, guanidinium and imidazolyl groups were introduced for its chemical activation through the adenine base. Among the six adenine residues, A9 is the unique residue that realizes all the positive effects; the 6-amino and 8-position of adenine and the 7-position of 8-aza-7-deaza-adenine could be used for the introduction of the functional groups. A12 is a new choice for catalytic improvement with an 8-substituent. Therefore, more active DNAzymes could be expected by this nucleobase-modified activation approach.

Chemical activation of 10–23 DNAzyme was realized at A9 modified with active functional groups amino, guanidinium, and imidazolyl groups.

Synthesis and Enzymatic Characterization of Sugar-Modified Nucleoside Triphosphate Analogs

Chemical modification of nucleic acids can be achieved by the enzymatic polymerization of modified nucleoside triphosphates (dN*TPs). This approach obviates some of the requirements and drawbacks imposed by the more traditional solid-phase synthesis of oligonucleotides. Here, we describe the protocol that is necessary to synthesize dN*TPs and evaluate their substrate acceptance by polymerases for their subsequent use in various applications including selection experiments to identify aptamers. The protocol is exemplified for a sugar-constrained nucleoside analog, 7',5'-bc-TTP.

Site-Specific Labeling of DNA via PCR with an Expanded Genetic Alphabet

The polymerase chain reaction (PCR) is a universal and essential tool in molecular biology and biotechnology, but it is generally limited to the amplification of DNA with the four-letter genetic alphabet. Here, we describe PCR amplification with a six-letter alphabet that includes the two natural dA-dT and dG-dC base pairs and an unnatural base pair (UBP) formed between the synthetic nucleotides dNaM and d5SICS or dTPT3 or analogs of these synthetic nucleotides modified with linkers that allow for the site-specific labeling of the amplified DNA with different functional groups. Under standard conditions, the six-letter DNA may be amplified with high efficiency and with greater than 99.9% fidelity. This allows for the efficient production of DNA site-specifically modified with different functionalities of interest for use in a wide range of applications.

Nucleic acid enzymes based on functionalized nucleosides

Nucleic acid-based enzymes have recently joined their proteinaceous counterparts as important biocatalysts. While RNA enzymes (ribozymes) are found in nature, deoxyribozymes or DNAzymes are man-made entities. Numerous ribozymes and DNAzymes have been identified by Darwinian selection methods to catalyze a broad array of chemical transformations. Despite these important advances, practical applications involving nucleic acid enzymes are often plagued by relatively poor pharmacokinetic properties and cellular uptake, rapid degradation by nucleases and/or by the limited chemical arsenal carried by natural DNA and RNA. In this review, the two main chemical approaches for the modification of nucleic acid-based catalysts, particularly DNAzymes, are described. These methods aim at improving the functional properties of nucleic acid enzymes by mitigating some of these shortcomings. In this context, recent developments in the post-SELEX processing of existing nucleic acid catalysts as well as efforts for the selection of DNAzymes and ribozymes with modified nucleoside triphosphates are summarized.

Tethered imidazole mediated duplex stabilization and its potential for aptamer stabilization

Previous investigations of the impact of an imidazole-tethered thymidine in synthetic DNA duplexes, monitored using UV and NMR spectroscopy, revealed a base context dependent increase in thermal stability of these duplexes and a striking correlation with the imidazolium pK_a. Unrestrained molecular dynamics (MD) simulations demonstrated the existence of a hydrogen bond between the imidazolium and the Hoogsteen side of a nearby guanosine which, together with electrostatic interactions, form the basis of the so-called pK_a-motif responsible for these duplex-stabilizing and pK_a-modulating properties. Here, the robustness and utility of this pK_a-motif was explored by introducing multiple imidazole-tethered thymidines at different positions on the same dsDNA duplex. For all constructs, sequence based expectations as to pK_a-motif formation were supported by MD simulations and experimentally validated using NOESY. Based on the analysis of the pK_a values and melting temperatures, guidelines are formulated to assist in the rational design of oligonucleotides modified with imidazolium-tethered thymidines for increased thermal stability that should be generally applicable, as demonstrated through a triply modified construct. In addition, a proof-of-principle study demonstrating enhanced stability of the l-argininamide binding aptamer modified with an imidazole-tethered thymidine in the presence and absence of ligand, demonstrates its potential for the design of more stable aptamers.

Coordination-induced structural changes of DNA-based optical and electrochemical sensors for metal ions detection

Metal ions play a critical role in human health and abnormal levels are closely related to various diseases. Therefore, the detection of metal ions with high selectivity, sensitivity and accuracy is particularly important. This article highlights and comments on the coordination-induced structural changes of DNA-based optical, electrochemical and optical-electrochemical-combined sensors for metal ions detection. Challenges and potential solutions of DNA-based sensors for the simultaneous detection of multiple metal ions are also discussed for further development and exploitation.

Towards the enzymatic formation of artificial metal base pairs with a carboxy-imidazole-modified nucleotide

The identification of synthetic nucleotides that sustain the formation of orthogonal, unnatural base pairs is an important goal in synthetic biology. Such artificial synthons have been used for the generation of semi-synthetic organisms as well as functional nucleic acids with enhanced binding properties. The enzymatic formation of artificial metal-base pairs is a vastly underexplored and alluring alternative to existing systems. Here, we report the synthesis and biochemical characterization of 1‑(2-deoxy‑β‑d‑ribofuranosyl) imidazole‑4‑carboxylate nucleoside triphosphate (dIm^CTP) which is equipped with a carboxylic acid moiety on the imidazole moiety in order to increase the coordination environment to [2 + 2] and [2 + 1]. A clear metal dependence was observed for the single incorporation of the modified nucleotide into DNA by the DNA polymerase from Thermus aquaticus (Taq). The presence of Ag^I in primer extension reactions conducted with combinations of 1‑(2‑deoxy‑β‑d‑ribofuranosyl) imidazole nucleoside triphosphate (dImTP) and dIm^CTP supported the unusual [2 + 1] coordination pattern. The efficiency of the tailing reactions mediated by the terminal deoxynucleotidyl transferase (TdT) was markedly improved when using dIm^CTP instead of dImTP. Even though products with multiple modified nucleotides were not observed, the appendage of additional metal binding ligands on the imidazole nucleobase appears to be a valid approach to improve the biochemical properties of modified triphosphates in the context of an expansion of the genetic alphabet with metal base pairs.

Functional-DNA-Driven Dynamic Nanoconstructs for Biomolecule Capture and Drug Delivery

The discovery of sequence-specific hybridization has allowed the development of DNA nanotechnology, which is divided into two categories: 1) structural DNA nanotechnology, which utilizes DNA as a biopolymer; and 2) dynamic DNA nanotechnology, which focuses on the catalytic reactions or displacement of DNA structures. Recently, numerous attempts have been made to combine DNA nanotechnologies with functional DNAs such as aptamers, DNAzymes, amplified DNA, polymer-conjugated DNA, and DNA loaded on functional nanoparticles for various applications; thus, the new interdisciplinary research field of "functional DNA nanotechnology" is initiated. In particular, a fine-tuned nanostructure composed of functional DNAs has shown immense potential as a programmable nanomachine by controlling DNA dynamics triggered by specific environments. Moreover, the programmability and predictability of functional DNA have enabled the use of DNA nanostructures as nanomedicines for various biomedical applications, such as cargo delivery and molecular drugs via stimuli-mediated dynamic structural changes of functional DNAs. Here, the concepts and recent case studies of functional DNA nanotechnology and nanostructures in nanomedicine are reviewed, and future prospects of functional DNA for nanomedicine are indicated.

Aptamer chemistry

Aptamers are single-stranded DNA or RNA molecules capable of tightly binding to specific targets. These functional nucleic acids are obtained by an in vitro Darwinian evolution method coined SELEX (Systematic Evolution of Ligands by EXponential enrichment). Compared to their proteinaceous counterparts, aptamers offer a number of advantages including a low immunogenicity, a relative ease of large-scale synthesis at affordable costs with little or no batch-to-batch variation, physical stability, and facile chemical modification. These alluring properties have propelled aptamers into the forefront of numerous practical applications such as the development of therapeutic and diagnostic agents as well as the construction of biosensing platforms. However, commercial success of aptamers still proceeds at a weak pace. The main factors responsible for this delay are the susceptibility of aptamers to degradation by nucleases, their rapid renal filtration, suboptimal thermal stability, and the lack of functional group diversity. Here, we describe the different chemical methods available to mitigate these shortcomings. Particularly, we describe the chemical post-SELEX processing of aptamers to include functional groups as well as the inclusion of modified nucleoside triphosphates into the SELEX protocol. These methods will be illustrated with successful examples of chemically modified aptamers used as drug delivery systems, in therapeutic applications, and as biosensing devices.

XNA Synthesis and Reverse Transcription by Engineered Thermophilic Polymerases

The B-family polymerases of hyperthermophilic archaea have proven an exceptional platform for engineering polymerases with extended substrate spectra, despite multiple mechanisms for detecting and avoiding incorporation of non-cognate substrates. These polymerases can efficiently synthesize and reverse-transcribe a number of xenonucleic acids (XNAs) that differ significantly from the canonical B-form of DNA. We present here a protocol for hexitol nucleic acid (HNA) synthesis by an engineered Thermococcus gorgonarius polymerase variant, including adaptation for large-scale synthesis and purification, and for other XNAs. We describe XNA purification and reverse transcription (with a previously reported XNA RT also based on Thermococcus gorgonarius), as well as key considerations for the characterization and optimization of XNA reactions. © 2018 by John Wiley & Sons, Inc.

Artificially Expanded Genetic Information Systems for New Aptamer Technologies

Directed evolution was first applied to diverse libraries of DNA and RNA molecules a quarter century ago in the hope of gaining technology that would allow the creation of receptors, ligands, and catalysts on demand. Despite isolated successes, the outputs of this technology have been somewhat disappointing, perhaps because the four building blocks of standard DNA and RNA have too little functionality to have versatile binding properties, and offer too little information density to fold unambiguously. This review covers the recent literature that seeks to create an improved platform to support laboratory Darwinism, one based on an artificially expanded genetic information system (AEGIS) that adds independently replicating nucleotide “letters” to the evolving “alphabet”.

Nucleic acids: function and potential for abiogenesis

The emergence of functional cooperation between the three main classes of biomolecules - nucleic acids, peptides and lipids - defines life at the molecular level. However, how such mutually interdependent molecular systems emerged from prebiotic chemistry remains a mystery. A key hypothesis, formulated by Crick, Orgel and Woese over 40 year ago, posits that early life must have been simpler. Specifically, it proposed that an early primordial biology lacked proteins and DNA but instead relied on RNA as the key biopolymer responsible not just for genetic information storage and propagation, but also for catalysis, i.e. metabolism. Indeed, there is compelling evidence for such an 'RNA world', notably in the structure of the ribosome as a likely molecular fossil from that time. Nevertheless, one might justifiably ask whether RNA alone would be up to the task. From a purely chemical perspective, RNA is a molecule of rather uniform composition with all four bases comprising organic heterocycles of similar size and comparable polarity and pK a values. Thus, RNA molecules cover a much narrower range of steric, electronic and physicochemical properties than, e.g. the 20 amino acid side-chains of proteins. Herein we will examine the functional potential of RNA (and other nucleic acids) with respect to self-replication, catalysis and assembly into simple protocellular entities.

Expanding the chemical diversity of TNA with tUTP derivatives that are substrates for a TNA polymerase

Expanding the chemical diversity of threose nucleic acid (TNA) beyond the natural bases would enable the development of TNA polymers with enhanced physicochemical properties. Here, we describe a versatile approach for increasing the chemical diversity of TNA using 5-alkynyl-modified α-l-threofuranosyl uridine triphosphates that are substrates for a TNA polymerase.

Systematic study of constraints imposed by modified nucleoside triphosphates with protein-like side chains for use in in vitro selection

Successful selection of modified DNAzymes depends on the potential for modified nucleoside triphosphates (dNTPs) to replace their unmodified counterparts in enzyme catalyzed primer extension reactions and, once incorporated, to serve as template bases for information transfer prior to PCR amplification. To date, the most densely modified DNAzymes have been selected from three modified dNTPs: 8-histaminyl-deoxyadenosine (dA^imTP), 5-guanidinoallyl-deoxyuridine (dU^gaTP), and 5-aminoallyl-deoxycytidine (dC^aaTP) to provide several RNA-cleaving DNAzymes with greatly enhanced rate constants compared to unmodified counterparts. Here we report biophysical and enzymatic properties of these three modified nucleosides in the context of specific oligonucleotide sequences to understand how these three modified nucleobases function in combinatorial selection. The base-pairing abilities of oligonucleotides bearing one or three modified nucleosides were investigated by thermal denaturation studies and as templates for enzymatic polymerization with both modified and unmodified dNTPs. While we address certain shortcomings in the use of modified dNTPs, we also provide key evidence of faithful incorporation and enzymatic read-out, which strongly supports their continued use in in vitro selection.

Evolution of sequence-defined highly functionalized nucleic acid polymers

The evolution of sequence-defined synthetic polymers made of building blocks beyond those compatible with polymerase enzymes or the ribosome has the potential to generate new classes of receptors, catalysts, and materials. Here we describe a ligase-mediated DNA-templated polymerization system and in vitro selection to evolve highly functionalized nucleic acid polymers (HFNAPs) made from 32 building blocks containing eight chemically diverse side-chains on a DNA backbone. Through iterated cycles of polymer translation, selection, and reverse translation, we discovered HFNAPs that bind PCSK9 and IL-6, two protein targets implicated in human diseases. Mutation and reselection of an active PCSK9-binding polymer yielded evolved polymers with high affinity (K_D = 3 nM). This evolved polymer potently inhibited binding between PCSK9 and the LDL receptor. Structure-activity relationship studies revealed that specific side-chains at defined positions in the polymers are required for binding to their respective targets. Our findings expand the chemical space of evolvable polymers to include densely functionalized nucleic acids with diverse, researcher-defined chemical repertoires.

Whole cell-SELEX of aptamers with a tyrosine-like side chain against live bacteria

In an effort to expand the binding and recognition capabilities of aptamers, a nucleoside triphosphate modified with a phenol that mimics the side chain of tyrosine was used in the selection of DNA aptamers against live bacteria. Of multiple modified aptamers that were isolated against Escherichia coli DH5α cells, one aptamer displays high selectivity and affinity for the target cells and is greatly enriched for phenol-modified dU nucleotides (dU^y, 47.5%). When the same sequences are synthesized with TTP, no binding is observed. Taken together, these findings highlight the value of using modified nucleotide triphosphates in aptamer selections and portends success in SELEX against an array of whole cells as targets.

A densely modified M2+-independent DNAzyme that cleaves RNA efficiently with multiple catalytic turnover

Sequence-specific cleavage of RNA targets in the absence of a divalent metal cation (M²⁺) has been a long-standing goal in bioorganic chemistry. Herein, we report the in vitro selection of novel RNA cleaving DNAzymes that are selected using 8-histaminyl-deoxyadenosine (dA^imTP), 5-guanidinoallyl-deoxyuridine (dU^gaTP), and 5-aminoallyl-deoxycytidine (dC^aaTP) along with dGTP. These modified dNTPs provide key functionalities reminiscent of the active sites of ribonucleases, notably RNase A. Of several such M²⁺-free DNAymes, DNAzyme 7-38-32 cleaves a 19 nt all-RNA substrate with multiple-turnover, under simulated physiological conditions wherein only 0.5 mM Mg²⁺ was present, attaining values of k_cat of 1.06 min^-1 and a K_M of 1.37 μM corresponding to a catalytic efficiency of ∼10⁶ M^-1 min^-1. Therefore, Dz7-38-32 represents a promising candidate towards the development of therapeutically efficient DNAzymes.

Multi-metal-dependent nucleic acid enzymes

Nucleic acid enzymes require metal ions for activity, and many recently discovered enzymes can use multiple metals, either binding to the scissile phosphate or also playing an allosteric role.

Enzymatic Synthesis, Amplification, and Application of DNA with a Functionalized Backbone

The ability to amplify DNA along with its unprecedented sequence control has led to its use for different applications, but all are limited by the properties available to natural nucleotides. We previously reported the evolution of polymerase SFM4-3, which better tolerates 2'-modified substrates. To explore the utility of SFM4-3, we now report the characterization of its recognition of substrates with 2'-azido, 2'-chloro, 2'-amino, or arabinose sugars. We find that SFM4-3 can efficiently synthesize polymers composed of these nucleotides, and most interestingly, that SFM4-3 can also PCR amplify these modified oligonucleotides. When combined with post-amplification modification, the latter allows for the exponential amplification of polymers that may be functionalized with desired moieties arrayed in a controlled fashion, the utility of which we demonstrate with extensive small molecule functionalization and the production and initial characterization of a novel DNA hydrogel.

In Vitro Selection of Diversely Functionalized Aptamers

We describe the application of T4 DNA ligase-catalyzed DNA templated oligonucleotide polymerization toward the evolution of a diversely functionalized nucleic acid aptamer for human α-thrombin. Using a 256-membered ANNNN comonomer library comprising 16 sublibraries modified with different functional groups, a highly functionalized aptamer for thrombin was raised with a dissociation constant of 1.6 nM. The aptamer was found to be selective for thrombin and required the modifications for binding affinity. This study demonstrates the most differentially functionalized nucleic acid aptamer discovered by in vitro selection and should enable the future exploration of functional group dependence during the evolution of nucleic acid polymer activity.

Engineering and application of polymerases for synthetic genetics

Organic chemistry has systematically probed the chemical determinants of function in nucleic acids by variation to the nucleobase, sugar ring and backbone moieties to build synthetic genetic polymers. Concomitantly, protein engineering has advanced to allow the discovery of polymerases capable of utilizing modified nucleotide analogs. A conjunction of these two lines of investigation in nucleotide chemistry and molecular biology has given rise to a new field of synthetic genetics dedicated to the exploration of the capacity of these novel, synthetic nucleic acids for the storage and propagation of genetic information, for evolution and for crosstalk, that is, information exchange with the natural genetic system. Here we summarize recent progress in synthetic genetics, specifically in the design of novel unnatural basepairs to expand the genetic alphabet as well as progress in engineering polymerases capable of templated synthesis, reverse transcription and evolution of synthetic genetic polymers.

Enzymatic Synthesis of 7',5'-Bicyclo-DNA Oligonucleotides

The selection of artificial genetic polymers with tailor-made properties for their application in synthetic biology requires the exploration of new nucleosidic scaffolds that can be used in selection experiments. Herein, we describe the synthesis of a bicyclo-DNA triphosphate (i.e., 7',5'-bc-TTP) and show its potential to serve for the generation of new xenonucleic acids (XNAs) based on this scaffold. 7',5'-bc-TTP is a good substrate for Therminator DNA polymerase, and up to seven modified units can be incorporated into a growing DNA chain. In addition, this scaffold sustains XNA-dependent DNA synthesis and potentially also XNA-dependent XNA synthesis. However, DNA-dependent XNA synthesis on longer templates is hampered by competitive misincorporation of deoxyadenosine triphosphate (dATP) caused by the slow rate of incorporation of 7',5'-bc-TTP.

Theranostic DNAzymes

DNAzymes are catalytically active DNA molecules that are obtained via in vitro selection. RNA-cleaving DNAzymes have attracted significant attention for both therapeutic and diagnostic applications due to their excellent programmability, stability, and activity. They can be designed to cleave a specific mRNA to down-regulate gene expression. At the same time, DNAzymes can sense a broad range of analytes. By combining these two functions, theranostic DNAzymes are obtained. This review summarizes the progress of DNAzyme for theranostic applications. First, in vitro selection of DNAzymes is briefly introduced, and some representative DNAzymes related to biological applications are summarized. Then, the applications of DNAzyme for RNA cleaving are reviewed. DNAzymes have been used to cleave RNA for treating various diseases, such as viral infection, cancer, inflammation and atherosclerosis. Several formulations have entered clinical trials. Next, the use of DNAzymes for detecting metal ions, small molecules and nucleic acids related to disease diagnosis is summarized. Finally, the theranostic applications of DNAzyme are reviewed. The challenges to be addressed include poor DNAzyme activity under biological conditions, mRNA accessibility, delivery, and quantification of gene expression. Possible solutions to overcome these challenges are discussed, and future directions of the field are speculated.

5-Substituted Pyrimidine and 7-Substituted 7-Deazapurine dNTPs as Substrates for DNA Polymerases in Competitive Primer Extension in the Presence of Natural dNTPs

A complete series of 5-substituted uracil or cytosine, as well as 7-substituted 7-deazaadenine and 7-deazaguanine 2'-deoxyribonucleoside triphosphates (dNTPs) bearing substituents of increasing bulkiness (H, Me, vinyl, ethynyl, and phenyl) were systematically studied in competitive primer extension in the presence of their natural counterparts (nonmodified dNTPs), and their kinetic data were determined. The results show that modified dNTPs bearing π-electron-containing substituents (vinyl, ethynyl, Ph) are typically excellent substrates for DNA polymerases comparable to or better than natural dNTPs. The kinetic studies revealed that these modified dNTPs have higher affinity to the active site of the enzyme-primer-template complex, and the calculations (semiempirical quantum mechanical scoring function) suggest that it is due to the cation-π interaction of the modified dNTP with Arg629 in the active site of Bst DNA polymerase.

Alternative Watson-Crick Synthetic Genetic Systems

In its "grand challenge" format in chemistry, "synthesis" as an activity sets out a goal that is substantially beyond current theoretical and technological capabilities. In pursuit of this goal, scientists are forced across uncharted territory, where they must answer unscripted questions and solve unscripted problems, creating new theories and new technologies in ways that would not be created by hypothesis-directed research. Thus, synthesis drives discovery and paradigm changes in ways that analysis cannot. Described here are the products that have arisen so far through the pursuit of one grand challenge in synthetic biology: Recreate the genetics, catalysis, evolution, and adaptation that we value in life, but using genetic and catalytic biopolymers different from those that have been delivered to us by natural history on Earth. The outcomes in technology include new diagnostic tools that have helped personalize the care of hundreds of thousands of patients worldwide. In science, the effort has generated a fundamentally different view of DNA, RNA, and how they work.

Enzymatic Synthesis of Sequence-Defined Synthetic Nucleic Acid Polymers with Diverse Functional Groups

The development and in-depth analysis of T4 DNA ligase-catalyzed DNA templated oligonucleotide polymerization toward the generation of diversely functionalized nucleic acid polymers is described. The NNNNT codon set enables low codon bias, high fidelity, and high efficiency for the polymerization of ANNNN libraries comprising various functional groups. The robustness of the method was highlighted in the copolymerization of a 256-membered ANNNN library comprising 16 sub-libraries modified with different functional groups. This enabled the generation of diversely functionalized synthetic nucleic acid polymer libraries with 93.8 % fidelity. This process should find ready application in DNA nanotechnology, DNA computing, and in vitro evolution of functional nucleic acid polymers.

Laboratory evolution of artificially expanded DNA gives redesignable aptamers that target the toxic form of anthrax protective antigen

Reported here is a laboratory in vitro evolution (LIVE) experiment based on an artificially expanded genetic information system (AEGIS). This experiment delivers the first example of an AEGIS aptamer that binds to an isolated protein target, the first whose structural contact with its target has been outlined and the first to inhibit biologically important activities of its target, the protective antigen from Bacillus anthracis. We show how rational design based on secondary structure predictions can also direct the use of AEGIS to improve the stability and binding of the aptamer to its target. The final aptamer has a dissociation constant of ∼35 nM. These results illustrate the value of AEGIS-LIVE for those seeking to obtain receptors and ligands without the complexities of medicinal chemistry, and also challenge the biophysical community to develop new tools to analyze the spectroscopic signatures of new DNA folds that will emerge in synthetic genetic systems replacing standard DNA and RNA as platforms for LIVE.

Generation of Synthetic Copolymer Libraries by Combinatorial Assembly on Nucleic Acid Templates

Recent advances in nucleic acid-templated copolymerization have expanded the scope of sequence-controlled synthetic copolymers beyond the molecular architectures witnessed in nature. This has enabled the power of molecular evolution to be applied to synthetic copolymer libraries to evolve molecular function ranging from molecular recognition to catalysis. This Review seeks to summarize different approaches available to generate sequence-defined monodispersed synthetic copolymer libraries using nucleic acid-templated polymerization. Key concepts and principles governing nucleic acid-templated polymerization, as well as the fidelity of various copolymerization technologies, will be described. The Review will focus on methods that enable the combinatorial generation of copolymer libraries and their molecular evolution for desired function.

Catalytic DNA: Scope, Applications, and Biochemistry of Deoxyribozymes

The discovery of natural RNA enzymes (ribozymes) prompted the pursuit of artificial DNA enzymes (deoxyribozymes) by in vitro selection methods. A key motivation is the conceptual and practical advantages of DNA relative to proteins and RNA. Early studies focused on RNA-cleaving deoxyribozymes, and more recent experiments have expanded the breadth of catalytic DNA to many other reactions. Including modified nucleotides has the potential to widen the scope of DNA enzymes even further. Practical applications of deoxyribozymes include their use as sensors for metal ions and small molecules. Structural studies of deoxyribozymes are only now beginning; mechanistic experiments will surely follow. Following the first report 21 years ago, the field of deoxyribozymes has promise for both fundamental and applied advances in chemistry, biology, and other disciplines.

Biochemical and Biophysical Understanding of Metal Ion Selectivity of DNAzymes

This review summarizes research into the metal-binding properties of catalytic DNAzymes, towards the goal of understanding the structural properties leading to metal ion specificity. Progress made and insight gained from a range of biochemical and biophysical techniques are covered, and promising directions for future investigations are discussed.

Enhancing aptamer function and stability via in vitro selection using modified nucleic acids

Nucleic acid aptamers have emerged as a promising alternative to antibodies for use as recognition elements in therapeutics, bioimaging, and analytical applications. A key benefit that aptamers possess relative to antibodies is their ability to be chemically synthesized. This advantage, coupled with the broad range of modified nucleotide building blocks that can be constructed using chemical synthesis, has enabled the discovery and development of modified aptamers having extraordinary affinity, specificity, and biostability. Early efforts to generate modified aptamers focused on selection of a native DNA or RNA aptamer, followed by post-selection trial-and-error testing of modifications. However, recent advances in polymerase engineering and templated nucleic acid synthesis have enabled the direct selection of aptamers having modified backbones and nucleobases. This review will discuss these technological advances and highlight the improvements in aptamer function that have been realized through in vitro selection of non-natural nucleic acids.

Probing the effect of minor groove interactions on the catalytic efficiency of DNAzymes 8-17 and 10-23

DNAzymes (Dz) 8-17 and 10-23 are two widely studied and well-characterized RNA-cleaving DNA catalysts. In an effort to further improve the understanding of the fragile interactions and dynamics of the enzymatic mechanism, this study examines the catalytic efficiency of minimally modified DNAzymes. Five single mutants of Dz8-17 and Dz10-23 were prepared by replacing the adenine residues in the corresponding catalytic cores with 3-deazaadenine units. Kinetic assays were used to assess the effect on the catalytic activity and thereby identify the importance of hydrogen bonding that arises from the N3 atoms. The results suggest that modifications at A15 and A15.0 of Dz8-17 have a significant influence and show a reduction in catalytic activity. Modification at each location in Dz10-23 results in a decrease of the observed rate constants, with A12 appearing to be the most affected with a reduction of ∼80% of kobs and ∼25% of the maximal cleavage rate compared to the wild-type DNAzyme. On the other hand, modification of A12 in Dz8-17 showed an ∼130% increase in kobs, thus unraveling a new potential site for the introduction of chemical modifications. A pH-profile analysis showed that the chemical cleavage step is rate-determining, regardless of the presence and/or location of the mutation. These findings point towards the importance of the N3-nitrogens of certain adenine nucleotides located within the catalytic cores of the DNAzymes for efficient catalytic activity and further suggest that they might directly partake in maintaining the appropriate tertiary structure. Therefore, it appears that minor groove interactions constitute an important feature of DNAzymes as well as ribozymes.